buf_page_is_checksum_valid_crc32()
buf_page_is_checksum_valid_innodb()
buf_page_is_checksum_valid_none():
Use ULINTPF instead of %lu and %u for ib_uint32_t
fil_space_verify_crypt_checksum():
Check that page is really empty if checksum and
LSN are zero.
fil_space_verify_crypt_checksum():
Correct the comment to be more agurate.
buf0buf.h:
Remove unnecessary is_corrupt variable from
buf_page_t structure.
recv_writer_thread(): Do not assign recv_writer_thread_active=true
in order to avoid a race condition with
recv_recovery_from_checkpoint_finish().
recv_init_crash_recovery(): Assign recv_writer_thread_active=true
before creating recv_writer_thread.
Use include/kill_and_restart_mysqld.inc instead of triggering
DBUG_SUICIDE() with debug instrumentation. In this way, more tests
can be run with --valgrind or on non-debug servers.
InnoDB can wrongly ignore the end of data files when using
innodb_page_size=32k or innodb_page_size=64k. These page sizes
use an allocation extent size of 2 or 4 megabytes, not 1 megabyte.
This issue does not affect MariaDB Server 10.2, which is using
the correct WL#5757 code from MySQL 5.7.
That said, it does not make sense to ignore the tail of data files.
The next time the data file needs to be extended, it would be extended
to a multiple of the extent size, once the size exceeds one extent.
Do not effectively set DEBUG_DBUG='d' by setting DEBUG_DBUG='-d,...'.
Instead, restore the saved value of DEBUG_DBUG.
Also, split the test innodb_fts.innodb_fts_misc_debug into
innodb_fts.crash_recovery and innodb_fts.misc_debug, and enable
these tests for --valgrind, the latter test for --embedded,
and the former tests for the non-debug server.
compatibility problems
Pages that are encrypted contain post encryption checksum on
different location that normal checksum fields. Therefore,
we should before decryption check this checksum to avoid
unencrypting corrupted pages. After decryption we can use
traditional checksum check to detect if page is corrupted
or unencryption was done using incorrect key.
Pages that are page compressed do not contain any checksum,
here we need to fist unencrypt, decompress and finally
use tradional checksum check to detect page corruption
or that we used incorrect key in unencryption.
buf0buf.cc: buf_page_is_corrupted() mofified so that
compressed pages are skipped.
buf0buf.h, buf_block_init(), buf_page_init_low():
removed unnecessary page_encrypted, page_compressed,
stored_checksum, valculated_checksum fields from
buf_page_t
buf_page_get_gen(): use new buf_page_check_corrupt() function
to detect corrupted pages.
buf_page_check_corrupt(): If page was not yet decrypted
check if post encryption checksum still matches.
If page is not anymore encrypted, use buf_page_is_corrupted()
traditional checksum method.
If page is detected as corrupted and it is not encrypted
we print corruption message to error log.
If page is still encrypted or it was encrypted and now
corrupted, we will print message that page is
encrypted to error log.
buf_page_io_complete(): use new buf_page_check_corrupt()
function to detect corrupted pages.
buf_page_decrypt_after_read(): Verify post encryption
checksum before tring to decrypt.
fil0crypt.cc: fil_encrypt_buf() verify post encryption
checksum and ind fil_space_decrypt() return true
if we really decrypted the page.
fil_space_verify_crypt_checksum(): rewrite to use
the method used when calculating post encryption
checksum. We also check if post encryption checksum
matches that traditional checksum check does not
match.
fil0fil.ic: Add missed page type encrypted and page
compressed to fil_get_page_type_name()
Note that this change does not yet fix innochecksum tool,
that will be done in separate MDEV.
Fix test failures caused by buf page corruption injection.
Remove the debug parameter innodb_force_recovery_crash that was
introduced into MySQL 5.6 by me in WL#6494 which allowed InnoDB
to resize the redo log on startup.
Let innodb.log_file_size actually start up the server, but ensure
that the InnoDB storage engine refuses to start up in each of the
scenarios.
If InnoDB is started in innodb_read_only mode such that
recovered incomplete transactions exist at startup
(but the redo logs are clean), an assertion will fail at shutdown,
because there would exist some non-prepared transactions.
logs_empty_and_mark_files_at_shutdown(): Do not wait for incomplete
transactions to finish if innodb_read_only or innodb_force_recovery>=3.
Wait for purge to finish in only one place.
trx_sys_close(): Relax the assertion that would fail first.
trx_free_prepared(): Also free recovered TRX_STATE_ACTIVE transactions
if innodb_read_only or innodb_force_recovery>=3.
srv_release_threads(): Actually wait for the threads to resume
from suspension. On CentOS 5 and possibly other platforms,
os_event_set() may be lost.
srv_resume_thread(): A counterpart of srv_suspend_thread().
Optionally wait for the event to be set, optionally with a timeout,
and then release the thread from suspension.
srv_free_slot(): Unconditionally suspend the thread. It is always
in resumed state when this function is entered.
srv_active_wake_master_thread_low(): Only call os_event_set().
srv_purge_coordinator_suspend(): Use srv_resume_thread() instead
of the complicated logic.
.. wsrep_max_ws_rows causes cluster to break when running
Galera cluster in TOI mode
Problem:
While copying records to temporary table during ALTER TABLE,
if there are more than wsrep_max_wsrep_rows records, the
command fails.
Fix:
Since, the temporary table records are not placed into the
binary log, wsrep_affected_rows must not be incremented.
Added a test.
that must not send a response
Problem:- When using wsrep (w/ galera) and issuing commands that can
cause deadlocks, deadlock exception errors are sent in responses to
commands such as close prepared statement and close connection which,
by spec, must not send a response.
Solution:- In dispatch_command, we will handle COM_QUIT and COM_STMT_CLOSE
commands even in case of error.
Patch Credit:- Jaka Močnik
As noted in MDEV-8841, any test that kills the server must issue
FLUSH TABLES, so that tables of crash-unsafe storage engines will
not be corrupted. Consistently issue this statement after any
call mtr.add_suppression() calls.
Also, do not invoke shutdown_server directly, but use helpers instead.
Do not kill the server after call mtr.add_suppression(), because
the procedure modifies a crash-unsafe table, and we do not want to
corrupt that table.
crashes server
This bug is the result of merging the Oracle MySQL follow-up fix
BUG#22963169 MYSQL CRASHES ON CREATE FULLTEXT INDEX
without merging the base bug fix:
Bug#79475 Insert a token of 84 4-bytes chars into fts index causes
server crash.
Unlike the above mentioned fixes in MySQL, our fix will not change
the storage format of fulltext indexes in InnoDB or XtraDB
when a character encoding with mbmaxlen=2 or mbmaxlen=3
and the length of a word is between 128 and 84*mbmaxlen bytes.
The Oracle fix would allocate 2 length bytes for these cases.
Compatibility with other MySQL and MariaDB releases is ensured by
persisting the used maximum length in the SYS_COLUMNS table in the
InnoDB data dictionary.
This fix also removes some unnecessary strcmp() calls when checking
for the legacy default collation my_charset_latin1
(my_charset_latin1.name=="latin1_swedish_ci").
fts_create_one_index_table(): Store the actual length in bytes.
This metadata will be written to the SYS_COLUMNS table.
fts_zip_initialize(): Initialize only the first byte of the buffer.
Actually the code should not even care about this first byte, because
the length is set as 0.
FTX_MAX_WORD_LEN: Define as HA_FT_MAXCHARLEN * 4 aka 336 bytes,
not as 254 bytes.
row_merge_create_fts_sort_index(): Set the actual maximum length of the
column in bytes, similar to fts_create_one_index_table().
row_merge_fts_doc_tokenize(): Remove the redundant parameter word_dtype.
Use the actual maximum length of the column. Calculate the extra_size
in the same way as row_merge_buf_encode() does.
InnoDB would refuse to start up if there is a mismatch on
the size of the system tablespace files. However, before this
check is conducted, the system tablespace may already have been
heavily modified.
InnoDB should perform the size check as early as possible.
recv_recovery_from_checkpoint_finish():
Move the recv_apply_hashed_log_recs() call to
innobase_start_or_create_for_mysql().
innobase_start_or_create_for_mysql(): Test the mutex functionality
before doing anything else. Use a compile_time_assert() for a
sizeof() constraint. Check the size of the system tablespace as
early as possible.
recv_scan_log_recs(): Remember if redo log apply is needed,
even if starting up in innodb_read_only mode.
recv_recovery_from_checkpoint_start_func(): Refuse
innodb_read_only startup if redo log apply is needed.
[0-9]*[.]?[0-9]* wasn't a sufficient regex to cover the
%lg used in Json_writer::add_double. Exponent formats
where missed.
Here we normalize all the replace_regex expressions for
ANALYZE FORMAT=JSON into one include file.
Signed-off-by: Daniel Black <daniel.black@au.ibm.com>
at the start 759654123 and the end 0 do not match."
For page compressed and encrypted tables log sequence
number at end is not stored, thus disable this message
for them.
