The bug case is similar to one fixed earlier bug_49536.
Deadlock involving LOCK_log appears to be possible because the purge running thread
is holding LOCK_log whereas there is no sense of doing that and which fact was
exploited by the earlier bug fixes.
Fixed with small reengineering of rotate_and_purge(), adding two new methods and
setting up a policy to execute those instead of the former
rotate_and_purge(RP_LOCK_LOG_IS_ALREADY_LOCKED).
The policy for using rotate(), purge() is that if the caller acquires LOCK_log itself,
it should call rotate(), release the mutex and run purge().
Side effect of this patch is refining error message of bug@11747416 to print
the whole path.
mysql-test/suite/rpl/r/rpl_cant_read_event_incident.result:
the file name printing is changed to a relative path instead of just the file name.
mysql-test/suite/rpl/r/rpl_log_pos.result:
the file name printing is changed to a relative path instead of just the file name.
mysql-test/suite/rpl/r/rpl_manual_change_index_file.result:
the file name printing is changed to a relative path instead of just the file name.
mysql-test/suite/rpl/r/rpl_packet.result:
the file name printing is changed to a relative path instead of just the file name.
mysql-test/suite/rpl/r/rpl_rotate_purge_deadlock.result:
new result file is added.
mysql-test/suite/rpl/t/rpl_cant_read_event_incident.test:
The test of that bug can't satisfy windows and unix backslash interpretation so windows
execution is chosen to bypass.
mysql-test/suite/rpl/t/rpl_rotate_purge_deadlock-master.opt:
new opt file is added.
mysql-test/suite/rpl/t/rpl_rotate_purge_deadlock.test:
regression test is added as well as verification of a
possible side effect of the fixes is tried.
sql/log.cc:
LOCK_log is never taken during execution of log purging routine.
The former MYSQL_BIN_LOG::rotate_and_purge is made to necessarily
acquiring and releasing LOCK_log.
If caller takes the mutex itself it has to use a new rotate(), purge()
methods combination and to never let purge() be run with LOCK_log grabbed.
split apart to allow
the caller to chose either it
Simulation of concurrently rotating/purging threads is added.
sql/log.h:
new rotate(), purge() methods are added to be used instead of
the former rotate_and_purge(RP_LOCK_LOG_IS_ALREADY_LOCKED).
rotate_and_purge() signature is changed. Caller should not call rotate_and_purge()
but rather {rotate(), purge()} if LOCK_log is acquired by it.
sql/rpl_injector.cc:
changes to reflect the new rotate_and_purge() signature.
sql/sql_class.h:
unnecessary constants are removed.
sql/sql_parse.cc:
changes to reflect the new rotate_and_purge() signature.
sql/sql_reload.cc:
changes to reflect the new rotate_and_purge() signature.
sql/sql_repl.cc:
followup for bug@11747416: the file name printing is changed to a relative
path instead of just the file name.
sql/sql_insert.cc:
CREATE ... IF NOT EXISTS may do nothing, but
it is still not a failure. don't forget to my_ok it.
******
CREATE ... IF NOT EXISTS may do nothing, but
it is still not a failure. don't forget to my_ok it.
sql/sql_table.cc:
small cleanup
******
small cleanup
One can set @@global.max_user_connections to -1 to block anyone, except SUPER user, to login.
If max_user_connection is 0, one can't change it without a restart (needed to get user connections counting to work correctly)
mysql-test/r/system_mysql_db.result:
Changed max_user_connections to handle negative numbers.
mysql-test/r/user_limits-2.result:
New test case that one can't change max_user_connection if it was 0
mysql-test/r/user_limits.result:
Fixed wrong error messages.
mysql-test/r/variables.result:
Store / restore max_user_connections (needed as there is now a --master.opt file that changes it)
mysql-test/t/subselect_mat_cost-master.opt:
Enable slow query log (as this test found some errors in slow query logging)
mysql-test/t/user_limits-2.test:
New test case that one can't change max_user_connection if it was 0
mysql-test/t/user_limits-master.opt:
Set max_user_connections (as one can't change it if it was 0)
mysql-test/t/user_limits.test:
Test max_user_connections -1
mysql-test/t/variables-master.opt:
Set max_user_connections (as one can't change it if it was 0)
mysql-test/t/variables.test:
Set/restore max_user_connections
scripts/Makefile.am:
Add a text message to mysql_fix_privilege_tables.sql that it's automaticly generated
scripts/mysql_system_tables.sql:
Change max_user_connections to signed
scripts/mysql_system_tables_fix.sql:
Change max_user_connections to signed
sql/item_func.cc:
Change SHOW_INT to be signed.
(Needed for max_user_connections and it's probably a bug that it was not originally signed)
sql/log.cc:
Remove some code that was not needed (All these variables are reset at start of query)
sql/mysql_priv.h:
Made max_user_connections signed.
Added max_user_connections_checking
sql/mysqld.cc:
Added max_user_connections_checking so that we know if max_user_connections was 0 at startup
(Which means that we will not do connection counting for accounts that don't have user resource limits)
Set thd->start_utime at same time as thr_create_utime. (Before start_utime could be < thr_create_utime which lead to wrong query counting)
sql/set_var.cc:
Don't allow one to change 'max_user_connections' if it was 0 at startup.
sql/sql_acl.cc:
Change user_connection counting to be negative.
sql/sql_connect.cc:
If max_user_connections is < 0 then only SUPER user can login.
Fixed wrong variable names for error messages.
Fixed wrong initial value for questions.
Set thd->start_utime and thd->thr_create_utime at startup. Needed to get time_out_user_resource_limits() to work.
sql/sql_show.cc:
SHOW_INT is now negative
sql/sql_yacc.yy:
Support negative values for MAX_USER_CONNECTIONS
sql/structs.h:
Make user connect counting work with signed numbers.
- If USER is given, all threads for that user is signaled
- If SOFT is used then the KILL will not be sent to the handler. This can be used to not interrupt critical things in the handler like 'REPAIR'.
Internally added more kill signals. This gives us more information of why a query/connection was killed.
- KILL_SERVER is used when server is going down. In this case the users gets ER_SHUTDOWN as the reason connection was killed.
- Changed signals to number in correct order, which makes it easier to test how the signal should affect the code.
- New error message ER_CONNECTION_KILLED if connection was killed by 'KILL CONNECTION'. Before we got error ER_SHUTDOWN.
Changed names of not used parameters KILL_QUERY & KILL_CONNCTION to mysql_kill() to not conflict with defines in the server
include/mysql.h.pp:
Updated file
include/mysql_com.h:
Changed names of not used parameters KILL_QUERY & KILL_CONNCTION to mysql_kill() to not conflict with defines in the server
mysql-test/r/kill.result:
Added test of KILL USER
mysql-test/suite/rpl/r/rpl_stm_000001.result:
Updated error code
mysql-test/suite/rpl/t/rpl_stm_000001.test:
Updated error codes
mysql-test/t/flush_read_lock_kill.test:
Updated error codes
mysql-test/t/kill.test:
Added test of KILL USER
plugin/handler_socket/handlersocket/database.cpp:
Removed THD:: from KILL
sql/debug_sync.cc:
Removed THD:: from KILL
sql/event_scheduler.cc:
Removed THD:: from KILL
sql/filesort.cc:
Removed THD:: from KILL
sql/ha_ndbcluster_binlog.cc:
Removed THD:: from KILL
sql/handler.cc:
Removed THD:: from KILL
Simplify code.
sql/lex.h:
Added new keywords HARD | SOFT
sql/log.cc:
Removed THD:: from KILL
Added testing of new error ER_CONNECTION_KILLED
sql/log_event.cc:
Removed THD:: from KILL
Added testing of new error ER_CONNECTION_KILLED
sql/mysql_priv.h:
Added new prototypes
sql/mysqld.cc:
Removed THD:: from KILL
Use KILL_SERVER_HARD signal on shutdown.
sql/scheduler.cc:
Removed THD:: from KILL
Simplify test if connection should be killed
sql/share/errmsg.txt:
New error message ER_CONNECTION_KILLED
sql/slave.cc:
Removed THD:: from KILL
sql/sp_head.cc:
Removed THD:: from KILL
sql/sql_base.cc:
Removed THD:: from KILL
sql/sql_cache.cc:
Removed THD:: from KILL
sql/sql_class.cc:
Removed THD:: from KILL
Added killed_errno()
Only signal kill to storage engine if HARD bit is set.
sql/sql_class.h:
Move KILL options out from THD to make them easier to use in sql_yacc.yy
sql/sql_connect.cc:
Removed THD:: from KILL
sql/sql_delete.cc:
Removed THD:: from KILL
sql/sql_error.cc:
Removed THD:: from KILL
sql/sql_insert.cc:
Removed THD:: from KILL
Simplifed testing if thread is killed.
sql/sql_lex.h:
Added kill options to st_lex
sql/sql_load.cc:
Removed THD:: from KILL
sql/sql_parse.cc:
Added kill options to st_lex
Simplifed and optimzed testing of thd->killed at end of query
Added support for KILL USER
Extended sql_kill() to allow use of more kill signals.
sql/sql_repl.cc:
Removed THD:: from KILL
sql/sql_show.cc:
Removed THD:: from KILL
Simplied testing if query/connection was killed
sql/sql_table.cc:
Removed THD:: from KILL
sql/sql_update.cc:
Removed THD:: from KILL
sql/sql_yacc.yy:
Added support for new KILL syntax: KILL [HARD|SOFT] [CONNECTION|QUERY] [ID | USER user_name]
storage/archive/ha_archive.cc:
Simplify compilation
storage/maria/ha_maria.cc:
Removed THD:: from KILL
Give more information when finding an error in a MyISAM table.
When killing system thread, use KILL_SYSTEM_THREAD instead of KILL_CONNECTION to make it easier to ignore the signal in sensitive context (like auto-repair)
Added new kill level: KILL_SERVER that will in the future to be used to signal killed by shutdown.
Add more warnings about killed connections when warning level > 3
include/myisamchk.h:
Added counting of printed info/notes
mysys/mf_iocache.c:
Remove duplicate assignment
sql/handler.cc:
Added test of KILL_SERVER
sql/log.cc:
Ignore new 'kill' error ER_NEW_ABORTING_CONNECTION when requesting query error code.
sql/mysqld.cc:
Add more warnings for killed connections when warning level > 3
sql/scheduler.cc:
Added checks for new kill signals
sql/slave.cc:
Ignore new kill signal ER_NEW_ABORTING_CONNECTION
sql/sp_head.cc:
Fixed assignment to bool
Added testing of new kill signals
sql/sql_base.cc:
Use KILL_SYSTEM_THREAD to auto-kill system threads
sql/sql_class.cc:
Add more warnings for killed connections when warning level > 3
thd_killed() now ignores KILL_BAD_DATA and THD::KILL_SYSTEM_THREAD as these should not abort sensitive operations.
sql/sql_class.h:
Added KILL_SYSTEM_THREAD and KILL_SERVER
sql/sql_connect.cc:
Added handling of KILL_SERVER
sql/sql_insert.cc:
Use KILL_SYSTEM_THREAD to auto-kill system threads
Added handling of KILL_SERVER
sql/sql_parse.cc:
Add more warnings for killed connections when warning level > 3
Added checking that thd->abort_on_warning is reset at end of query.
sql/sql_show.cc:
Update condition for when a query is 'killed'
storage/myisam/ha_myisam.cc:
Added counting of info/notes printed
storage/myisam/mi_check.c:
Always print an an error if we find data errors when checking/repairing a MyISAM table.
When a repair was killed, don't retry repair.
Added assert if sort_get_next_record() returned an error without an error message.
Removed nonsence check "if (sort_param->read_cache.error < 0)" in repair.
storage/myisam/myisamchk.c:
Added counting of notes printed
storage/pbxt/src/thread_xt.cc:
Better error message.
client/mysql_upgrade.c:
missing DBUG_RETURN
client/mysqladmin.cc:
client plugin memory wasn't freed
client/mysqlcheck.c:
client plugin memory, defaults, a result set, a command-line option value were not freed.
missing DBUG_RETURN.
client/mysqldump.c:
client plugin memory wasn't freed
client/mysqlslap.c:
client plugin memory wasn't freed
client/mysqltest.cc:
hopeless. cannot be fixed.
mysql-test/valgrind.supp:
Bug#56666 is now fixed.
mysys/array.c:
really, don't allocate if the caller didn't ask to.
mysys/my_init.c:
safemalloc checks must be done at the very end
mysys/my_thr_init.c:
not needed anymore
sql-common/client.c:
memory leak
sql/log.cc:
log_file was not closed, memory leak.
sql/mysqld.cc:
fix bug#56666 (causing many P_S related memory leaks).
close_active_mi() not called for --bootstrap, memory leak.
sql/sql_lex.cc:
redo Lex->mi handling
sql/sql_lex.h:
redo Lex->mi handling
sql/sql_plugin.cc:
plugins having PLUGIN_VAR_MEMALLOC string variables have this variables allocated in every THD.
The memory was freed in ~THD but only if plugin was still active. If plugin was unloaded the
variable was not found and the memory was lost. By loading and unloading plugins an arbitrary
amount of memory can be lost.
sql/sql_repl.cc:
redo Lex->mi handling
sql/sql_yacc.yy:
completely wrong handling of Lex->mi - run-time memory leak, by repeating the statement
arbitrary amount of memory can be lost.
Lex->mi.repl_ignore_server_ids_opt was allocated when parsing CHANGE MASTER,
and freed after executing the statement. if parser failed on syntax (or another)
error the statement was never executed. Lex->mi was simply bzero-ed for the next
CHANGE MASTER statement.
sql/table.cc:
didn't compile
storage/perfschema/pfs_lock.h:
Bug#56666 is fixed
compilation error in mysys/my_getsystime.c fixed
some redundant code removed
sec_to_time, time_to_sec, from_unixtime, unix_timestamp, @@timestamp now
use decimal, not double for numbers with a fractional part.
purge_master_logs_before_date() fixed
many bugs in corner cases fixed
mysys/my_getsystime.c:
compilation failure fixed
sql/sql_parse.cc:
don't cut corners. it backfires.
A lot of small fixes and new test cases.
client/mysqlbinlog.cc:
Cast removed
client/mysqltest.cc:
Added missing DBUG_RETURN
include/my_pthread.h:
set_timespec_time_nsec() now only takes one argument
mysql-test/t/date_formats.test:
Remove --disable_ps_protocl as now also ps supports microseconds
mysys/my_uuid.c:
Changed to use my_interval_timer() instead of my_getsystime()
mysys/waiting_threads.c:
Changed to use my_hrtime()
sql/field.h:
Added bool special_const_compare() for fields that may convert values before compare (like year)
sql/field_conv.cc:
Added test to get optimal copying of identical temporal values.
sql/item.cc:
Return that item_int is equal if it's positive, even if unsigned flag is different.
Fixed Item_cache_str::save_in_field() to have identical null check as other similar functions
Added proper NULL check to Item_cache_int::save_in_field()
sql/item_cmpfunc.cc:
Don't call convert_constant_item() if there is nothing that is worth converting.
Simplified test when years should be converted
sql/item_sum.cc:
Mark cache values in Item_sum_hybrid as not constants to ensure they are not replaced by other cache values in compare_datetime()
sql/item_timefunc.cc:
Changed sec_to_time() to take a my_decimal argument to ensure we don't loose any sub seconds.
Added Item_temporal_func::get_time() (This simplifies some things)
sql/mysql_priv.h:
Added Lazy_string_decimal()
sql/mysqld.cc:
Added my_decimal constants max_seconds_for_time_type, time_second_part_factor
sql/table.cc:
Changed expr_arena to be of type CONVENTIONAL_EXECUTION to ensure that we don't loose any items that are created by fix_fields()
sql/tztime.cc:
TIME_to_gmt_sec() now sets *in_dst_time_gap in case of errors
This is needed to be able to detect if timestamp is 0
storage/maria/lockman.c:
Changed from my_getsystime() to set_timespec_time_nsec()
storage/maria/ma_loghandler.c:
Changed from my_getsystime() to my_hrtime()
storage/maria/ma_recovery.c:
Changed from my_getsystime() to mmicrosecond_interval_timer()
storage/maria/unittest/trnman-t.c:
Changed from my_getsystime() to mmicrosecond_interval_timer()
storage/xtradb/handler/ha_innodb.cc:
Added support for new time,datetime and timestamp
unittest/mysys/thr_template.c:
my_getsystime() -> my_interval_timer()
unittest/mysys/waiting_threads-t.c:
my_getsystime() -> my_interval_timer()
Problem: MYSQL_BIN_LOG::reset_logs acquires mutexes in wrong order.
The correct order is first LOCK_thread_count and then LOCK_log. This function
does it the other way around. This leads to deadlock when run in parallel
with a thread that takes the two locks in correct order. For example, a thread
that disconnects will take the locks in the correct order.
Fix: change order of the locks in MYSQL_BIN_LOG::reset_logs:
first LOCK_thread_count and then LOCK_log.
mysql-test/suite/binlog/r/binlog_reset_master.result:
added result file
mysql-test/suite/binlog/t/binlog_reset_master.test:
Added test case that demonstrates deadlock because of wrong mutex order.
The deadlock is between two threads:
- RESET MASTER acquires mutexes in wrong order.
- client thread shutdown code acquires mutexes in right order.
Actually, this test case does not produce deadlock in 5.1, probably
the client thread shutdown code does not hold both mutexes at the same
time. However, the bug existed in 5.1 (mutexes are taken in the wrong
order) so we push the test case to 5.1 too, to prevent future
regressions.
sql/log.cc:
Change mutex acquisition to the correct order:
first LOCK_thread_count, then LOCK_log.
sql/mysqld.cc:
Add debug code to synchronize test case.
The error message is now based on GetLastError() rather than errno.
Background: errno is C runtime specific and in many circumstances
it is not set, e.g when using Win32 API or socket functions.
This assert could be triggered during two phase commit if binary
log was used as transaction coordinator log. The triggered assert
checks that the same number of transaction IDs are processed in
the prepare and commit phases.
The reason it was triggered, was that the transaction consisted
of an INSERT/UPDATE IGNORE that had an ignorable error. Since it
had an error, no row log events were made and therefore
prepared_xids was 0. However, since it was an IGNORE statement,
the statement started a read/write statement transaction, committed
it and completed successfully.
This patch fixes the problem by adjusting the assert to take
this possibility into account.
Test case added to binlog.binlog_innodb_row.test.
Fixed compiler warnings
client/readline.cc:
Fixed compiler warning
mysql-test/t/mysqldump.test:
Only run test if utf8 is used
sql/log.cc:
Fixed compiler warning
sql/mysql_priv.h:
Fixed compiler warnings
tests/mysql_client_test.c:
Don't abort test if ucs2 is not in use.
Changed test suite to use --log-basename (to get the code tested)
Added --sync-sys=1 to test suite to speed it up.
Better error messages if something goes wrong with mysql_install_db
mysql-test/Makefile.am:
Removed not existing directory
mysql-test/lib/My/ConfigFactory.pm:
Use log-basename
We had to also set 'log_error' as some test was explicitely using the old name
Added 'sync-sys=1' to speed up test suite
mysql-test/r/variables-notembedded.result:
Updated test results (variable relay_log is now set)
mysql-test/suite/binlog/t/binlog_delete_and_flush_index-master.opt:
Force specific names for some log files.
mysql-test/suite/binlog/t/binlog_index-master.opt:
Force specific names for some log files.
mysql-test/suite/binlog/t/binlog_stm_unsafe_warning-master.opt:
Force specific names for some log files.
mysql-test/suite/binlog/t/binlog_stm_unsafe_warning.test:
Better error message if something goes wrong
mysql-test/suite/rpl/r/rpl_flushlog_loop.result:
Updated results
mysql-test/suite/rpl/rpl_1slave_base.cnf:
Use --log-basename
scripts/mysql_install_db.sh:
More information to --help
Write url to knowledge base if something goes wrong
Fail at once if we can't create a database directory (no reason to continue and write a screenful of not related text)
scripts/mysqld_safe.sh:
Also allow one to use --data for --datadir (common shortening)
Added support for --log-basename
Fail at once if we can't create a log directory
Fixed bug where we used a pid file name without '.pid' extension
sql/log.cc:
Create a log file name trough my_once_alloc() (To get it automaticly freed at exit)
sql/mysql_priv.h:
Added new prototype
sql/mysqld.cc:
Added support for --log-basename
Better help for a lot of log-filename related variables.
sql/rpl_rli.cc:
Write information that one can use --log-basename
sql/set_var.cc:
Add log_basename as a readonly variable
Implement binlog_optimize_thread_scheduling option to allow benchmarking the
effect of running commit_ordered() for multiple transactions all in one
thread.
Before this fix, all the performance schema instrumentation for both the binary log
and the relay log would use the following instruments:
- wait/io/file/sql/binlog
- wait/io/file/sql/binlog_index
- wait/synch/mutex/sql/MYSQL_BIN_LOG::LOCK_index
- wait/synch/cond/sql/MYSQL_BIN_LOG::update_cond
This instrumentation is too general and can be more specific.
With this fix, the binlog instrumentation is identical,
and the relay log instrumentation is changed to:
- wait/io/file/sql/relaylog
- wait/io/file/sql/relaylog_index
- wait/synch/mutex/sql/MYSQL_RELAY_LOG::LOCK_index
- wait/synch/cond/sql/MYSQL_RELAY_LOG::update_cond
With this change, the performance instrumentation for the binary log and the relay log,
which share the same structure but have different uses, is more detailed.
This is especially important for hosts in the middle of a replication chain,
that are both masters (binlog) and slaves (relaylog).
and collateral changes.
* introduce my_hrtime_t, my_timediff_t, and conversion macros
* inroduce TIME_RESULT, but it can only be returned from Item::cmp_type(),
never from Item::result_type()
* pack_time/unpack_time function for "packed" representation of
MYSQL_TIME in a longlong that can be compared
* ADDTIME()/SUBTIME()/+- INTERVAL now work with TIME values
* numbers aren't quoted in EXPLAIN EXTENDED
* new column I_S.COLUMNS.DATETIME_PRECISION
* date/time values are compares to anything as date/time, not as strings or numbers.
* old timestamp(X) is no longer supported
* MYSQL_TIME to string conversion functions take precision as an argument
* unified the warnings from Field_timestamp/datetime/time/date/newdate store methods
* Field_timestamp_hires, Field_datetime_hires, Field_time_hires
* Field_temporal
* Lazy_string class to pass a value (string, number, time) polymorphically down the stack
* make_truncated_value_warning and Field::set_datetime_warning use Lazy_string as an argument, removed char*/int/double variants
* removed Field::can_be_compared_as_longlong(). Use Field::cmp_type() == INT_RESULT instead
* introduced Item::cmp_result() instead of Item::is_datetime() and Item::result_as_longlong()
* in many cases date/time types are treated like other types, not as special cases
* greatly simplified Arg_comparator (regarding date/time/year code)
* SEC_TO_TIME is real function, not integer.
* microsecond precision in NOW, CURTIME, etc
* Item_temporal. All items derived from it only provide get_date, but no val* methods
* replication of NOW(6)
* Protocol::store(time) now takes the precision as an argument
* @@TIMESTAMP is a double
client/mysqlbinlog.cc:
remove unneded casts
include/my_sys.h:
introduce my_hrtime_t, my_timediff_t, and conversion macros
include/my_time.h:
pack_time/unpack_time, etc.
convenience functions to work with MYSQL_TIME::second_part
libmysql/libmysql.c:
str_to_time() is gone. str_to_datetime() does it now.
my_TIME_to_str() takes the precision as an argument
mysql-test/include/ps_conv.inc:
time is not equal to datetime anymore
mysql-test/r/distinct.result:
a test for an old MySQL bug
mysql-test/r/explain.result:
numbers aren't quoted in EXPLAIN EXTENDED
mysql-test/r/func_default.result:
numbers aren't quoted in EXPLAIN EXTENDED
mysql-test/r/func_sapdb.result:
when decimals=NOT_FIXED_DEC it means "not fixed" indeed
mysql-test/r/func_test.result:
numbers aren't quoted in EXPLAIN EXTENDED
mysql-test/r/func_time.result:
ADDTIME()/SUBTIME()/+- INTERVAL now work with TIME values
mysql-test/r/having.result:
numbers aren't quoted in EXPLAIN EXTENDED
mysql-test/r/information_schema.result:
new column I_S.COLUMNS.DATETIME_PRECISION
mysql-test/r/join_outer.result:
numbers aren't quoted in EXPLAIN EXTENDED
mysql-test/r/metadata.result:
TIMESTAMP no longer has zerofill flag
mysql-test/r/range.result:
invalid datetime is not compared with as a string
mysql-test/r/select.result:
NO_ZERO_IN_DATE, etc only affect storage - according to the manual
numbers aren't quoted in EXPLAIN EXTENDED
mysql-test/r/subselect.result:
numbers aren't quoted in EXPLAIN EXTENDED
mysql-test/r/sysdate_is_now.result:
when decimals=NOT_FIXED_DEC it means "not fixed" indeed
mysql-test/r/type_blob.result:
TIMESTAMP(N) is not deprecated
mysql-test/r/type_timestamp.result:
old TIMESTAMP(X) semantics is not supported anymore
mysql-test/r/union.result:
numbers aren't quoted in EXPLAIN EXTENDED
mysql-test/r/varbinary.result:
numbers aren't quoted in EXPLAIN EXTENDED
mysql-test/t/distinct.test:
test for an old MySQL bug
mysql-test/t/func_time.test:
+- INTERVAL now works with TIME values
mysql-test/t/select.test:
typo
mysql-test/t/subselect.test:
only one error per statement, please
mysql-test/t/system_mysql_db_fix40123.test:
old timestamp(X) is no longer supported
mysql-test/t/system_mysql_db_fix50030.test:
old timestamp(X) is no longer supported
mysql-test/t/system_mysql_db_fix50117.test:
old timestamp(X) is no longer supported
mysql-test/t/type_blob.test:
old timestamp(X) is no longer supported
mysql-test/t/type_timestamp.test:
old timestamp(X) is no longer supported
mysys/my_getsystime.c:
functions to get the time with microsecond precision
mysys/my_init.c:
move the my_getsystime.c initialization code to my_getsystime.c
mysys/my_static.c:
no need to make these variables extern
mysys/my_static.h:
no need to make these variables extern
scripts/mysql_system_tables.sql:
old timestamp(X) is no longer supported
scripts/mysql_system_tables_fix.sql:
old timestamp(X) is no longer supported
scripts/mysqlhotcopy.sh:
old timestamp(X) is no longer supported
sql-common/my_time.c:
* call str_to_time from str_to_datetime, as appropriate
* date/time to string conversions take precision as an argument
* number_to_time()
* TIME_to_double()
* pack_time() and unpack_time()
sql/event_data_objects.cc:
cast is not needed
my_datetime_to_str() takes precision as an argument
sql/event_db_repository.cc:
avoid dangerous downcast (because the pointer is
not always Field_timestamp, see events_1.test)
sql/event_queue.cc:
avoid silly double-work for cond_wait
(having an endpoint of wait, subtract the current time to get the timeout,
and use set_timespec() macro to fill in struct timespec, by adding the current
time to the timeout)
sql/field.cc:
* remove virtual Field::get_time(), everyone should use only Field::get_date()
* remove lots of #ifdef WORDS_BIGENDIAN
* unified the warnings from Field_timestamp/datetime/time/date/newdate store methods
* Field_timestamp_hires, Field_datetime_hires, Field_time_hires
* Field_temporal
* make_truncated_value_warning and Field::set_datetime_warning use Lazy_string as an argument, removed char*/int/double variants
sql/field.h:
* remove virtual Field::get_time(), everyone should use only Field::get_date()
* remove lots of #ifdef WORDS_BIGENDIAN
* unified the warnings from Field_timestamp/datetime/time/date/newdate store methods
* Field_timestamp_hires, Field_datetime_hires, Field_time_hires
* Field_temporal
* make_truncated_value_warning and Field::set_datetime_warning use Lazy_string as an argument, removed char*/int/double variants
* removed Field::can_be_compared_as_longlong(). Use Field::cmp_type() == INT_RESULT instead
sql/filesort.cc:
TIME_RESULT, cmp_time()
sql/item.cc:
* numbers aren't quoted in EXPLAIN EXTENDED
* Item::cmp_result() instead of Item::is_datetime() and Item::result_as_longlong()
* virtual Item::get_time() is gone
* Item_param::field_type() is set correctly
* Item_datetime, for a datetime constant
* time to anything is compared as a time
* Item_cache::print() prints the value is available
* bug fixed in Item_cache_int::val_str()
sql/item.h:
* Item::print_value(), to be used from Item_xxx::print() when needed
* Item::cmp_result() instead of Item::is_datetime() and Item::result_as_longlong()
* virtual Item::get_time() is gone
* Item_datetime, for a datetime constant
* better default for cast_to_int_type()
* Item_cache objects now *always* have the field_type() set
sql/item_cmpfunc.cc:
* get_year_value, get_time_value are gone. get_datetime_value does it all
* get_value_a_func, get_value_b_func are gone
* can_compare_as_dates() is gone too, TIME_RESULT is used instead
* cmp_type() instead or result_type() when doing a comparison
* compare_datetime and compate_e_datetime in the comparator_matrix, is_nulls_eq is gone
* Item::cmp_result() instead of Item::is_datetime() and Item::result_as_longlong()
sql/item_cmpfunc.h:
greatly simplified Arg_comparator
sql/item_create.cc:
* fix a bug in error messages in CAST
sql/item_func.cc:
Item::cmp_result() instead of Item::is_datetime() and Item::result_as_longlong()
mention all possibitiles in switch over Item_result values, or use default:
sql/item_row.h:
overwrite the default cmp_type() for Item_row,
as no MYSQL_TYPE_xxx value corresponds to ROW_RESULT
sql/item_timefunc.cc:
rewrite make_datetime to support precision argument
SEC_TO_TIME is real function, not integer.
many functions that returned temporal values had duplicate code in val_* methods,
some of them did not have get_date() which resulted in unnecessary date->str->date conversions.
Now they all are derived from Item_temporal_func and *only* provide get_date, not val* methods.
many fixes to set decimals (datetime precision) correctly.
sql/item_timefunc.h:
SEC_TO_TIME is real function, not integer.
many functions that returned temporal values had duplicate code in val_* methods,
some of them did not have get_date() which resulted in unnecessary date->str->date conversions.
Now they all are derived from Item_temporal_func and *only* provide get_date, not val* methods.
many fixes to set decimals (datetime precision) correctly.
sql/log_event.cc:
replication of NOW(6)
sql/log_event.h:
replication of NOW(6)
sql/mysql_priv.h:
Lazy_string class to pass a value (string, number, time) polymorphically down the stack.
make_truncated_value_warning() that uses it.
sql/mysqld.cc:
datetime in Arg_comparator::comparator_matrix
sql/opt_range.cc:
cleanup: don't disable warnings before calling save_in_field_no_warnings()
sql/protocol.cc:
Protocol::store(time) now takes the precision as an argument
sql/protocol.h:
Protocol::store(time) now takes the precision as an argument
sql/rpl_rli.cc:
small cleanup
sql/set_var.cc:
SET TIMESTAMP=double
sql/set_var.h:
@@TIMESTAMP is a double
sql/share/errmsg.txt:
precision and scale are unsigned
sql/slave.cc:
replication of NOW(6)
sql/sp_head.cc:
cleanup
sql/sql_class.cc:
support for NOW(6)
sql/sql_class.h:
support for NOW(6)
sql/sql_insert.cc:
support for NOW(6)
sql/sql_select.cc:
use item->cmp_type().
move a comment where it belongs
sql/sql_show.cc:
new column I_S.COLUMNS.DATETIME_PRECISION
sql/sql_yacc.yy:
TIME(X), DATETIME(X), cast, NOW(X), CURTIME(X), etc
sql/time.cc:
fix date_add_interval() to support MYSQL_TIMESTAMP_TIME argument
storage/myisam/ha_myisam.cc:
TIMESTAMP no longer carries ZEROFIELD flag, still we keep MYI file compatible.
strings/my_vsnprintf.c:
warnings
tests/mysql_client_test.c:
old timestamp(X) does not work anymore
datetime is no longer equal to time
Changed some String.ptr() -> String.c_ptr() for String that are not guaranteed to end with \0
Removed some c_ptr() usage from parameters to functions that takes ptr & length
Use preallocate buffers to avoid calling malloc() for most operations.
sql/event_db_repository.cc:
alias is now a String
sql/event_scheduler.cc:
c_ptr -> c_ptr_safe() to avoid warnings from valgrind.
sql/events.cc:
c_ptr -> c_ptr_safe() to avoid warnings from valgrind.
c_ptr -> ptr() as function takes ptr & length
sql/field.cc:
alias is now a String
sql/field.h:
alias is now a String
sql/ha_partition.cc:
alias is now a String
sql/handler.cc:
alias is now a String
ptr() -> c_ptr() as string is not guaranteed to be \0 terminated
sql/item.cc:
Store error parameter in separarte buffer to ensure correct error message
sql/item_func.cc:
ptr() -> c_ptr_safe() as string is not guaranteed to be \0 terminated
sql/item_sum.h:
Use my_strtod() instead of my_atof() to not have to make string \0 terminated
sql/lock.cc:
alias is now a String
sql/log.cc:
c_ptr() -> ptr() as function takes ptr & length
sql/log_event.cc:
c_ptr_quick() -> ptr() as we only want to get the pointer to String buffer
sql/opt_range.cc:
ptr() -> c_ptr() as string is not guaranteed to be \0 terminated
sql/opt_table_elimination.cc:
alias is now a String
sql/set_var.cc:
ptr() -> c_ptr() as string is not guaranteed to be \0 terminated
c_ptr() -> c_ptr_safe() to avoid warnings from valgrind.
c_ptr() -> ptr() as function takes ptr & length
Simplify some code.
sql/sp.cc:
c_ptr() -> ptr() as function takes ptr & length
sql/sp_rcontext.cc:
alias is now a String
sql/sql_base.cc:
alias is now a String.
Here we win a realloc() for most alias usage.
sql/sql_class.cc:
Use size descriptor for printf() to avoid accessing bytes outside of buffer
sql/sql_insert.cc:
Change allocation of TABLE as it's now contains a String
_ptr() -> ptr() as function takes ptr & length
sql/sql_load.cc:
Use preallocate buffers to avoid calling malloc() for most operations.
sql/sql_parse.cc:
Use c_ptr_safe() to ensure string is \0 terminated.
sql/sql_plugin.cc:
c_ptr_quick() -> ptr() as function takes ptr & length
sql/sql_select.cc:
alias is now a String
sql/sql_show.cc:
alias is now a String
sql/sql_string.h:
Added move() function to change who owns the string (owner does the free)
sql/sql_table.cc:
alias is now a String
c_ptr() -> c_ptr_safe() to avoid warnings from valgrind.
sql/sql_test.cc:
c_ptr() -> c_ptr_safe() to avoid warnings from valgrind.
alias is now a String
sql/sql_trigger.cc:
c_ptr() -> c_ptr_safe() to avoid warnings from valgrind.
Use field->init() to setup pointers to alias.
sql/sql_update.cc:
alias is now a String
sql/sql_view.cc:
ptr() -> c_ptr_safe() as string is not guaranteed to be \0 terminated
sql/sql_yacc.yy:
r() -> c_ptr() as string is not guaranteed to be \0 terminated
sql/table.cc:
alias is now a String
sql/table.h:
alias is now a String
storage/federatedx/ha_federatedx.cc:
Remove extra 1 byte alloc that is automaticly done by strmake()
Ensure that error message ends with \0
storage/maria/ha_maria.cc:
alias is now a String
storage/myisam/ha_myisam.cc:
alias is now a String
client/readline.cc:
Initialize not used variable (to kill wrong compiler warning)
mysql-test/suite/handler/aria.result:
Updated test result
mysql-test/suite/handler/handler.inc:
Changed index to ensure rows are in a fixed order
mysql-test/suite/handler/heap.result:
Updated test result
mysql-test/suite/handler/innodb.result:
Updated test result
mysql-test/suite/handler/myisam.result:
Updated test result
plugin/handler_socket/handlersocket/Makefile.am:
Use CXX flags to compile
sql/filesort.cc:
Initialize variable that may be used
sql/log.cc:
Initialize not used variable (to kill wrong compiler warning)
sql/opt_range_mrr.cc:
Fixed cast to avoid compiler warning
storage/xtradb/fil/fil0fil.c:
Added cast to avoid compiler warning
- Fixed some issues with partitions and connection_string, which also fixed lp:716890 "Pre- and post-recovery crash in Aria"
- Fixed wrong assert in Aria
Now need to merge with latest xtradb before pushing
sql/ha_partition.cc:
Ensure that m_ordered_rec_buffer is not freed before close.
sql/mysqld.cc:
Changed to use opt_stack_trace instead of opt_pstack.
Removed references to pstack
sql/partition_element.h:
Ensure that connect_string is initialized
storage/maria/ma_key_recover.c:
Fixed wrong assert
- MWL#47, allowing to annotate row-based binlog events with the SQL test of
the originating query (eg. in mysqlbinlog output).
- row_based_replication_without_primary_key.patch, providing more intelligent
selection of index to use on slave when applying row-based binlog events
for tables with no primary key.
- Make mysqlbinlog omit redundant `use` around BEGIN/SAVEPOINT/COMMIT/
ROLLBACK in 5.0 binlogs.
This patch adds options to annotate the binlog (and the mysqlbinlog
output) with the original SQL query for queries that are logged
using row-based replication.
From a user perspective, the problem is that a FLUSH LOGS or SIGHUP
signal could end up associating the stdout and stderr to random
files. In the case of this bug report, the streams would end up
associated to InnoDB ibd files.
The freopen(3) function is not thread-safe on FreeBSD. What this
means is that if another thread calls open(2) during freopen()
is executing that another thread's fd returned by open(2) may get
re-associated with the file being passed to freopen(3). See FreeBSD
PR number 79887 for reference:
http://www.freebsd.org/cgi/query-pr.cgi?pr=79887
This problem is worked around by substituting a internal hook within
the FILE structure. This avoids the loss of atomicity by not having
the original fd closed before its duplicated.
Patch based on the original work by Vasil Dimov.
include/my_sys.h:
Export my_freopen.
mysys/my_fopen.c:
Add a my_freopen abstraction to workaround bugs in specific OSes.
Add a prototype for getosreldate() as older FreeBSD versions did
not define one.
sql/log.cc:
Move freopen abstraction code over to mysys.
The streams are now only reopened for writing.
Post-push fixes:
- fixed platform dependent result files
- appeasing valgrind warnings:
Fault injection was also uncovering a previously existing
potential mem leaks. For BUG#46166 testing purposes, fixed
by forcing handling the leak when injecting faults.
Manual merge from mysql-5.1-bugteam into mysql-5.5-bugteam.
Conflicts
=========
Text conflict in sql/log.cc
Text conflict in sql/log.h
Text conflict in sql/slave.cc
Text conflict in sql/sql_parse.cc
Text conflict in sql/sql_priv.h
- Fixed problem with oqgraph and 'make dist'
Note that after this merge we have a problem show in join_outer where we examine too many rows in one specific case (related to BUG#57024).
This will be fixed when mwl#128 is merged into 5.3.
when generating new name.
If find_uniq_filename returns an error, then this error is not
being propagated upwards, and execution does not report error to
the user (although a entry in the error log is generated).
Additionally, some more errors were ignored in new_file_impl:
- when writing the rotate event
- when reopening the index and binary log file
This patch addresses this by propagating the error up in the
execution stack. Furthermore, when rotation of the binary log
fails, an incident event is written, because there may be a
chance that some changes for a given statement, were not properly
logged. For example, in SBR, LOAD DATA INFILE statement requires
more than one event to be logged, should rotation fail while
logging part of the LOAD DATA events, then the logged data would
become inconsistent with the data in the storage engine.
mysql-test/include/restart_mysqld.inc:
Refactored restart_mysqld so that it is not hardcoded for
mysqld.1, but rather for the current server.
mysql-test/suite/binlog/t/binlog_index.test:
The error on open of index and binary log on new_file_impl
is now caught. Thence the user will get an error message.
We need to accomodate this change in the test case for the
failing FLUSH LOGS.
mysql-test/suite/rpl/t/rpl_binlog_errors-master.opt:
Sets max_binlog_size to 4096.
mysql-test/suite/rpl/t/rpl_binlog_errors.test:
Added some test cases for asserting that the error is found
and reported.
sql/handler.cc:
Catching error now returned by unlog (in ha_commit_trans) and
returning it.
sql/log.cc:
Propagating errors from new_file_impl upwards. The errors that
new_file_impl catches now are:
- error on generate_new_name
- error on writing the rotate event
- error when opening the index or the binary log file.
sql/log.h:
Changing declaration of:
- rotate_and_purge
- new_file
- new_file_without_locking
- new_file_impl
- unlog
They now return int instead of void.
sql/mysql_priv.h:
Change signature of reload_acl_and_cache so that write_to_binlog
is an int instead of bool.
sql/mysqld.cc:
Redeclaring not_used var as int instead of bool.
sql/rpl_injector.cc:
Changes to catch the return from rotate_and_purge.
sql/slave.cc:
Changes to catch the return values for new_file and rotate_relay_log.
sql/slave.h:
Changes to rotate_relay_log declaration (now returns int
instead of void).
sql/sql_load.cc:
In SBR, some logging of LOAD DATA events goes through
IO_CACHE_CALLBACK invocation at mf_iocache.c:_my_b_get. The
IO_CACHE implementation is ignoring the return value for from
these callbacks (pre_read and post_read), so we need to find out
at the end of the execution if the error is set or not in THD.
sql/sql_parse.cc:
Catching the rotate_relay_log and rotate_and_purge return values.
Semantic change in reload_acl_and_cache so that we report errors
in binlog interactions through the write_to_binlog output parameter.
If there was any failure while rotating the binary log, we should
then report the error to the client when handling SQLCOMM_FLUSH.
the DROP statement ..."
Problem: When using temporary tables and closing a session, an
implicit DROP TEMPORARY TABLE IF EXISTS is written to the binary
log (while cleaning up the context of the session THD - see:
sql_class.cc:THD::cleanup which calls close_temporary_tables).
close_temporary_tables, first checks if the binary log is opened
and then proceeds to creating the DROP statements. Then, such
statements, are written to the binary log through
MYSQL_BIN_LOG::write(Log_event *). Inside, there is another check
if the binary log is opened and if not an error is returned. This
is where the faulty behavior is triggered. Given that the test
case replays a binary log, with temp tables statements, and right
after it issues RESET MASTER, there is a chance that is_open will
report false (when the mysql session is closed and the temporary
tables are written).
is_open may return false, because MYSQL_BIN_LOG::reset_logs is
not setting the correct flag (LOG_CLOSE_TO_BE_OPENED), on the
MYSQL_LOG_BIN::log_state (instead it sets just the
LOG_CLOSE_INDEX flag, leaving the log_state to
LOG_CLOSED). Thence, when writing the DROP statement as part of
the THD::cleanup, the thread could get a return value of false
for is_open - inside MYSQL_BIN_LOG::write, ultimately reporting
that it can't write the event to the binary log.
Fix: We fix this by adding the correct flag, missing in the
second close.
Open issues:
- A better fix for #57688; Igor is working on this
- Test failure in index_merge_innodb.test ; Igor promised to look at this
- Some Innodb tests fails (need to merge with latest xtradb) ; Kristian promised to look at this.
- Failing tests: innodb_plugin.innodb_bug56143 innodb_plugin.innodb_bug56632 innodb_plugin.innodb_bug56680 innodb_plugin.innodb_bug57255
- Werror is disabled; Should be enabled after merge with xtradb.
- Changed TABLE->alias to String to get fewer reallocs when alias are used.
- Preallocate some buffers
Changed some String->c_ptr() -> String->ptr() when \0 is not needed.
Fixed wrong usage of String->ptr() when we need a \0 terminated string.
Use my_strtod() instead of my_atof() to avoid having to add \0 to string.
c_ptr() -> c_ptr_safe() to avoid warnings from valgrind.
zr
sql/event_db_repository.cc:
Update usage of TABLE->alias
sql/event_scheduler.cc:
c_ptr() -> c_ptr_safe()
sql/events.cc:
c_ptr() -> ptr() as \0 was not needed
sql/field.cc:
Update usage of TABLE->alias
sql/field.h:
Update usage of TABLE->alias
sql/ha_partition.cc:
Update usage of TABLE->alias
sql/handler.cc:
Update usage of TABLE->alias
Fixed wrong usage of str.ptr()
sql/item.cc:
Fixed error where code wrongly assumed string was \0 terminated.
sql/item_func.cc:
c_ptr() -> c_ptr_safe()
Update usage of TABLE->alias
sql/item_sum.h:
Use my_strtod() instead of my_atof() to avoid having to add \0 to string
sql/lock.cc:
Update usage of TABLE->alias
sql/log.cc:
c_ptr() -> ptr() as \0 was not needed
sql/log_event.cc:
c_ptr_quick() -> ptr() as \0 was not needed
sql/opt_range.cc:
ptr() -> c_ptr() as \0 is needed
sql/opt_subselect.cc:
Update usage of TABLE->alias
sql/opt_table_elimination.cc:
Update usage of TABLE->alias
sql/set_var.cc:
ptr() -> c_ptr() as \0 is needed
c_ptr() -> c_ptr_safe()
sql/sp.cc:
c_ptr() -> ptr() as \0 was not needed
sql/sp_rcontext.cc:
Update usage of TABLE->alias
sql/sql_base.cc:
Preallocate buffers
Update usage of TABLE->alias
sql/sql_class.cc:
Fix arguments to sprintf() to work even if string is not \0 terminated
sql/sql_insert.cc:
Update usage of TABLE->alias
c_ptr() -> ptr() as \0 was not needed
sql/sql_load.cc:
Preallocate buffers
Trivial optimizations
sql/sql_parse.cc:
Trivial optimization
sql/sql_plugin.cc:
c_ptr() -> ptr() as \0 was not needed
sql/sql_select.cc:
Update usage of TABLE->alias
sql/sql_show.cc:
Update usage of TABLE->alias
sql/sql_string.h:
Added move() function to move allocated memory from one object to another.
sql/sql_table.cc:
Update usage of TABLE->alias
c_ptr() -> c_ptr_safe()
sql/sql_test.cc:
ptr() -> c_ptr_safe()
sql/sql_trigger.cc:
Update usage of TABLE->alias
c_ptr() -> c_ptr_safe()
sql/sql_update.cc:
Update usage of TABLE->alias
sql/sql_view.cc:
ptr() -> c_ptr_safe()
sql/sql_yacc.yy:
ptr() -> c_ptr()
sql/table.cc:
Update usage of TABLE->alias
sql/table.h:
Changed TABLE->alias to String to get fewer reallocs when alias are used.
storage/federatedx/ha_federatedx.cc:
Use c_ptr_safe() to ensure strings are \0 terminated.
storage/maria/ha_maria.cc:
Update usage of TABLE->alias
storage/myisam/ha_myisam.cc:
Update usage of TABLE->alias
storage/xtradb/row/row0sel.c:
Ensure that null bits in record are properly reset.
(Old code didn't work as row_search_for_mysql() can be called twice while reading fields from one row.
Before this fix, file io for the binary log file was not accounted properly,
and showed no io at all.
This bug was due to the following issues:
1) file io for the binlog was instrumented:
- sometime as "wait/io/file/sql/binlog"
- sometime as "wait/io/file/sql/MYSQL_LOG"
leading to inconsistent event_names.
2) the binlog file itself was using an IO_CACHE,
but the IO_CACHE implementation in mysys/mf_iocache.c was
not instrumented to make performance schema calls to record file io.
3) The "wait/io/file/sql/MYSQL_LOG" instrumentation was used
for several log files, such as:
- the binary log
- the slow log
- the query log
which caused file io in these different log files to be accounted
against the same instrument.
The instrumentation needs to have a finer grain and report io
in different event_names, because each file really serves a different purpose.
With this fix:
- the IO_CACHE implementation is now instrumented
- the "wait/io/file/sql/MYSQL_LOG" instrument has been removed
- binlog io is now always instrumented with "wait/io/file/sql/binlog"
- the slow log is instrumented with a new name, "wait/io/file/sql/slow_log"
- the query log is instrumented with a new name, "wait/io/file/sql/query_log"
Make the binlog handlerton participate in START TRANSACTION WITH CONSISTENT
SNAPSHOT, recording the binlog position corresponding to the snapshot taken
in other MVCC storage engines.
Expose this consistent binlog position as the new status variables
binlog_trx_file and binlog_trx_position. This enables to get a fully
non-locking snapshot of the database (including binlog position for
slave provisioning), avoiding the need for FLUSH TABLES WITH READ LOCK.
Modify mysqldump to detect if the server supports this new feature, and
if so, avoid FLUSH TABLES WITH READ LOCK for --single-transaction
--master-data snapshot backups.
After the WL#2687, the binlog_cache_size and max_binlog_cache_size affect both the
stmt-cache and the trx-cache. This means that the resource used is twice the amount
expected/defined by the user.
The binlog_cache_use is incremented when the stmt-cache or the trx-cache is used
and binlog_cache_disk_use is incremented when the disk space from the stmt-cache or the
trx-cache is used. This behavior does not allow to distinguish which cache may be harming
performance due to the extra disk accesses and needs to have its in-memory cache
increased.
To fix the problem, we introduced two new options and status variables related to the
stmt-cache:
Options:
. binlog_stmt_cache_size
. max_binlog_stmt_cache_size
Status Variables:
. binlog_stmt_cache_use
. binlog_stmt_cache_disk_use
So there are
. binlog_cache_size that defines the size of the transactional cache for
updates to transactional engines for the binary log.
. binlog_stmt_cache_size that defines the size of the statement cache for
updates to non-transactional engines for the binary log.
. max_binlog_cache_size that sets the total size of the transactional
cache.
. max_binlog_stmt_cache_size that sets the total size of the statement
cache.
. binlog_cache_use that identifies the number of transactions that used the
temporary transactional binary log cache.
. binlog_cache_disk_use that identifies the number of transactions that used
the temporary transactional binary log cache but that exceeded the value of
binlog_cache_size.
. binlog_stmt_cache_use that identifies the number of statements that used the
temporary non-transactional binary log cache.
. binlog_stmt_cache_disk_use that identifies the number of statements that used
the temporary non-transactional binary log cache but that exceeded the value of
binlog_stmt_cache_size.
include/my_sys.h:
Updated message on disk_writes' usage.
mysql-test/extra/binlog_tests/binlog_cache_stat.test:
Updated the test case and added code to check the new status variables
binlog_stmt_cache_use and binlog_stmt_cache_disk_use.
mysql-test/extra/rpl_tests/rpl_binlog_max_cache_size.test:
Updated the test case to use the new system variables max_binlog_stmt_cache_size and binlog_stmt_cache_size.
mysql-test/r/mysqld--help-notwin.result:
Updated the result file.
mysql-test/suite/binlog/r/binlog_mixed_cache_stat.result:
Updated the result file.
mysql-test/suite/binlog/r/binlog_row_cache_stat.result:
Updated the result file.
mysql-test/suite/binlog/r/binlog_stm_cache_stat.result:
Updated the result file.
mysql-test/suite/rpl/r/rpl_mixed_binlog_max_cache_size.result:
Update the result file.
mysql-test/suite/rpl/r/rpl_row_binlog_max_cache_size.result:
Update the result file.
mysql-test/suite/rpl/r/rpl_stm_binlog_max_cache_size.result:
Updated the result file.
mysql-test/suite/sys_vars/inc/binlog_stmt_cache_size_basic.inc:
Added a test case to check the binlog_stmt_cache_size.
mysql-test/suite/sys_vars/r/binlog_stmt_cache_size_basic_32.result:
Updated the result file.
mysql-test/suite/sys_vars/r/binlog_stmt_cache_size_basic_64.result:
Updated the result file.
mysql-test/suite/sys_vars/r/max_binlog_stmt_cache_size_basic.result:
Updated the result file.
mysql-test/suite/sys_vars/t/binlog_stmt_cache_size_basic_32.test:
Added a test case to check the binlog_stmt_cache_size.
mysql-test/suite/sys_vars/t/binlog_stmt_cache_size_basic_64.test:
Added a test case to check the binlog_stmt_cache_size.
mysql-test/suite/sys_vars/t/max_binlog_cache_size_func-master.opt:
Removed because there is no test case max_binlog_cache_size_func.
mysql-test/suite/sys_vars/t/max_binlog_stmt_cache_size_basic.test:
Added a test case to check the system variable max_binlog_stmt_cache_size.
sql/log.cc:
There two main changes in here:
. Changed the set_write_error() as an error message is set according
to the type of the cache.
. Created the function set_binlog_cache_info where references to the
appropriate status and system variables are set and the server can
smoothly compute statistics and set the maximum size for each cache.
sql/log.h:
Changed the signature of the function in order to identify the error message
to be printed out as there is a different error code for each type of cache.
sql/mysqld.cc:
Added new status variables binlog_stmt_cache_use and binlog_stmt_cache_disk_use.
sql/mysqld.h:
Added new system variables max_binlog_stmt_cache_size and binlog_stmt_cache_size.
sql/share/errmsg-utf8.txt:
Added new error message related to the statement cache.
sql/sys_vars.cc:
Added new system variables max_binlog_stmt_cache_size and binlog_stmt_cache_size.
The binlog_cache_use is incremented twice when changes to a transactional table
are committed, i.e. TC_LOG_BINLOG::log_xid calls is called. The problem happens
because log_xid calls both binlog_flush_stmt_cache and binlog_flush_trx_cache
without checking if such caches are empty thus unintentionally increasing the
binlog_cache_use value twice.
Although not explicitly mentioned in the bug, the binlog_cache_disk_use presents
the same problem.
The binlog_cache_use and binlog_cache_disk_use are status variables that are
incremented when transactional (i.e. trx-cache) or non-transactional (i.e.
stmt-cache) changes are committed. They are used to compute the ratio between
the use of disk and memory while gathering updates for a transaction.
The problem reported is fixed by avoiding incrementing the binlog_cache_use
and binlog_cache_disk_use if a cache is empty. We also have decided to increment
both variables when a cache is truncated as the cache is used although its
content is discarded and is not written to the binary log.
In this patch, we take the opportunity to re-organize the code around the
function binlog_flush_trx_cache and binlog_flush_stmt_cache.
mysql-test/extra/binlog_tests/binlog_cache_stat.test:
Updated the test case with comments and additional tests to check both
transactional and non-transactional changes and what happens when a
is transaction either committed or aborted.
mysql-test/suite/binlog/r/binlog_innodb.result:
Updated the result file.
mysql-test/suite/binlog/r/binlog_mixed_cache_stat.result:
Updated the result file.
mysql-test/suite/binlog/r/binlog_row_cache_stat.result:
Updated the result file.
mysql-test/suite/binlog/r/binlog_stm_cache_stat.result:
Updated the result file.
mysql-test/suite/binlog/t/binlog_mixed_cache_stat.test:
Updated the test case with a new source file.
mysql-test/suite/binlog/t/binlog_row_cache_stat.test:
Updated the test case with a new source file.
mysql-test/suite/binlog/t/binlog_stm_cache_stat.test:
Updated the test case with a new source file.
sql/log.cc:
There are four changes in here:
. Computed statistics on binlog_cache_use and binlog_cache_disk_use while
resting the cache.
. Refactored the code so binlog_flush_cache handles both the trx-cache and
stmt-cache.
. There are functions that encapsulate the calls to binlog_flush_cache and
make easier to read the code.
. binlog_commit_flush_stmt_cache is now taking into account the result:
success or error.
sql/log_event.h:
Guaranteed Xid_log_event is always classified as a transactional event.
Port the Facebook patch for releasing InnoDB row locks early to the
MWL#116 framework.
A new --innodb-release-locks-early option (off by default) enables a
prepare_ordered() handlerton method which will release row locks and
commit a transaction to memory immediately after successful prepare.
If the server subsequently tries to rollback (ie. due to binlog error),
crashes the server to prevent corrupting the InnoDB state.
mysql-test/r/innodb_release_row_locks_early.result:
Test case.
mysql-test/t/innodb_release_row_locks_early-master.opt:
Test case.
mysql-test/t/innodb_release_row_locks_early.test:
Test case.
sql/log.cc:
Add DEBUG_SYNC points for testing.
storage/xtradb/handler/ha_innodb.cc:
Release locks during prepare phase if --innodb-release-locks-early.
Crash the server if we are asked to rollback after releasing locks and
committing the transaction to memory.
storage/xtradb/include/srv0srv.h:
Add variable for --innodb-release-locks-early option.
storage/xtradb/include/trx0sys.ic:
If --innodb-release-locks-early, treat a transaction as committed to memory
as soon as it enters the TRX_PREPARED state.
storage/xtradb/srv/srv0srv.c:
Add variable for --innodb-release-locks-early option.
Remove the extra class hierarchy with classes TC_LOG_queued, TC_LOG_unordered,
and TC_LOG_group_commit, folding the code into the TC_LOG_MMAP and
TC_LOG_BINLOG classes. In particular TC_LOG_BINLOG is greatly simplified by
this, unifying the code path for transactional and non-transactional
commit.
Remove unnecessary locking of LOCK_log in MYSQL_BIN_LOG::write() (backport
of same fix from mysql-5.5).
Make TC_LOG_MMAP (and TC_LOG_DUMMY) derive directly from TC_LOG, avoiding the
inheritance hierarchy TC_LOG_queued->TC_LOG_unordered.
Put the wakeup facility for commit_ordered() calls into the THD class.
Some renaming to get better names.
Fix assorted warnings that are generated in optimized builds.
Most of it is silencing variables that are set but unused.
This patch also introduces the MY_ASSERT_UNREACHABLE macro
which helps the compiler to deduce that a certain piece of
code is unreachable.
include/my_compiler.h:
Use GCC's __builtin_unreachable if available. It allows
GCC to deduce the unreachability of certain code paths,
thus avoiding warnings that, for example, accused that a
variable could be used without being initialized (due to
unreachable code paths).
For crash testing: kill the server without generating core file.
include/my_dbug.h
Use kill(getpid(), SIGKILL) which cannot be caught by signal handlers.
All DBUG_XXX macros should be no-ops in optimized mode, do that for DBUG_ABORT as well.
sql/handler.cc
Kill server without generating core.
sql/log.cc
Kill server without generating core.
For crash testing: kill the server without generating core file.
include/my_dbug.h
Use kill(getpid(), SIGKILL) which cannot be caught by signal handlers.
All DBUG_XXX macros should be no-ops in optimized mode, do that for DBUG_ABORT as well.
sql/handler.cc
Kill server without generating core.
sql/log.cc
Kill server without generating core.
Now the actual binlog position for each commit is stored in THD, and XtraDB
can fetch the correct value from within commit_ordered() or commit().
mysql-test/r/group_commit_binlog_pos.result:
Test case for XtraDB binlog position.
mysql-test/t/group_commit_binlog_pos-master.opt:
Test case for XtraDB binlog position.
mysql-test/t/group_commit_binlog_pos.test:
Test case for XtraDB binlog position.
sql/log.cc:
Save binlog position corresponding to commit in THD, and make accessible to storage engine.
sql/sql_parse.cc:
Add generic crash point for use in test cases.
storage/xtradb/handler/ha_innodb.cc:
Update to use new method of getting current binlog position that works with group commit.
storage/xtradb/handler/ha_innodb.h:
Update to use new method of getting current binlog position that works with group commit.
The binlog_cache_use is incremented twice when changes to a transactional table
are committed, i.e. TC_LOG_BINLOG::log_xid calls is called. The problem happens
because log_xid calls both binlog_flush_stmt_cache and binlog_flush_trx_cache
without checking if such caches are empty thus unintentionally increasing the
binlog_cache_use value twice.
To fix the problem we avoided incrementing the binlog_cache_use if the cache is
empty. We also decided to increment binlog_cache_use when the cache is truncated
as the cache is used although its content is discarded and is not written to the
binary log.
Note that binlog_cache_use is incremented for both types of cache, transactional
and non-transactional and that the behavior presented in this patch also applies
to the binlog_cache_disk_use.
Finally, we re-organized the code around the functions binlog_flush_trx_cache and
binlog_flush_stmt_cache.
mysql-test/extra/binlog_tests/binlog_cache_stat.test:
Updated the test case with comments and additional tests to check both
transactional and non-transactional changes and what happens when a
is transaction either committed or aborted.
mysql-test/suite/binlog/r/binlog_innodb.result:
Updated the result file.
mysql-test/suite/binlog/r/binlog_mixed_cache_stat.result:
Updated the result file.
mysql-test/suite/binlog/r/binlog_row_cache_stat.result:
Updated the result file.
mysql-test/suite/binlog/r/binlog_stm_cache_stat.result:
Updated the result file.
mysql-test/suite/binlog/t/binlog_mixed_cache_stat.test:
Updated the test case with a new source file.
mysql-test/suite/binlog/t/binlog_row_cache_stat.test:
Updated the test case with a new source file.
mysql-test/suite/binlog/t/binlog_stm_cache_stat.test:
Updated the test case with a new source file.
sql/log_event.cc:
Introduced debug information to check if Query_log_event("BEGIN"),
Query_log_event("COMMIT") and Query_log_event("ROLLBACK").
sql/log_event.h:
Guaranteed Xid_log_event is always classified as a transactional event.
In sql/log.c, member function wait_for_update_bin_log, a condition is entered with
THD::enter_cond but is not exited. This might leave dangling references to the
mutex/condition in the per-thread information area.
To fix the problem, we call exit_cond to properly remove references to the mutex,
LOCK_log.
- Changed to still use bcmp() in certain cases becasue
- Faster for short unaligneed strings than memcmp()
- Bettern when using valgrind
- Changed to use my_sprintf() instead of sprintf() to get higher portability for old systems
- Changed code to use MariaDB version of select->skip_record()
- Removed -%::SCCS/s.% from Makefile.am:s to remove automake warnings
Added open log file with FILE_SHARE_DELETE flag on Windows.
sql/log.cc:
added reopen_fstreams();
modified redirect_std_streams(): call to sequence of freopen()
replaced to reopen_fstreams();
modified flush_error_log(): removed file rename for flushed
error log file.
sql/mysqld.cc:
modified main() and init_server_components(): do open log error file
over call to reopen_fstreams().
temp table
This patch introduces two key changes in the replication's behavior.
Firstly, it reverts part of BUG#51894 which puts any update to temporary tables
into the trx-cache. Now, updates to temporary tables are handled according to
the type of their engines as a regular table.
Secondly, an unsafe mixed statement, (i.e. a statement that access transactional
table as well non-transactional or temporary table, and writes to any of them),
are written into the trx-cache in order to minimize errors in the execution when
the statement logging format is in use.
Such changes has a direct impact on which statements are classified as unsafe
statements and thus part of BUG#53259 is reverted.
After BUG#36649, warnings for sub-statements are cleared when a
new sub-statement is started. This is problematic since it suppresses
warnings for unsafe statements in some cases. It is important that we
always give a warning to the client, because the user needs to know
when there is a risk that the slave goes out of sync.
We fixed the problem by generating warning messages for unsafe statements
while returning from a stored procedure, function, trigger or while
executing a top level statement.
We also started checking unsafeness when both performance and log tables are
used. This is necessary after the performance schema which does a distinction
between performance and log tables.
mysql-test/extra/rpl_tests/create_recursive_construct.inc:
Changed the order of the calls in the procedure because the code
that checks if a warning message is printed out expects that the
first statement gives an warning what is not the case for INSERT
INTO ta$CRC_ARG_level VALUES (47);
mysql-test/suite/binlog/r/binlog_stm_unsafe_warning.result:
Updated the result file.
mysql-test/suite/binlog/r/binlog_unsafe.result:
There are several changes here:
(1) - Changed the CREATE PROCEDURE $CRC.
(2) - The procedure $CRC was failing and the content of the binlog
was being printed out, after fix (1) the failure disappeared.
(3) - The warning message for unsafeness due to auto-increment collumns was
changed.
(4) - The warning message for unsafeness due to VERSION(), RAND() was changed.
mysql-test/suite/binlog/t/binlog_stm_unsafe_warning.test:
Tested filters.
mysql-test/suite/binlog/t/binlog_unsafe.test:
Reenabled the test case binlog_unsafe.
mysql-test/suite/binlog/t/disabled.def:
Reenabled the test case binlog_unsafe.
mysql-test/suite/rpl/r/rpl_begin_commit_rollback.result:
Updated the result file.
mysql-test/suite/rpl/r/rpl_non_direct_stm_mixing_engines.result:
Updated the result file.
mysql-test/suite/rpl/r/rpl_stm_auto_increment_bug33029.result:
Updated the result file.
sql/sql_class.cc:
Moved the stmt_accessed_table_flag variable and related information to the
LEX as we need the variable reset after each statement even inside a stored
procedure, what did not happen if the information was in the THD.
Changed the routine in the THD::binlog_query that prints the warning
messages to avoid trying to print them when inside a stored procedure,
function or trigger.
Checked for unsafeness when both performance and log tables where used.
After the introduction of the performance schema, we need to check both.
In sql/log.c, member function wait_for_update_bin_log, a condition is entered with
THD::enter_cond but is not exited. This might leave dangling references to the
mutex/condition in the per-thread information area.
To fix the problem, we call exit_cond to properly remove references to the mutex,
LOCK_log.
A CREATE...SELECT that fails is written to the binary log if a non-transactional
statement is updated. If the logging format is ROW, the CREATE statement and the
changes are written to the binary log as distinct events and by consequence the
created table is not rolled back in the slave.
In this patch, we opted to let the slave goes out of sync by not writting to the
binary log the CREATE statement. We do this by simply reseting the binary log's
cache.
mysql-test/suite/rpl/r/rpl_drop.result:
Added a test case.
mysql-test/suite/rpl/t/rpl_drop.test:
Added a test case.
sql/log.cc:
Introduced a function to clean up the cache.
sql/log.h:
Introduced a function to clean up the cache.
sql/sql_insert.cc:
Cleaned up the binary log cache if a CREATE...SELECT fails.
This patch also fixes Bug#55452 "SET PASSWORD is
replicated twice in RBR mode".
The goal of this patch is to remove the release of
metadata locks from close_thread_tables().
This is necessary to not mistakenly release
the locks in the course of a multi-step
operation that involves multiple close_thread_tables()
or close_tables_for_reopen().
On the same token, move statement commit outside
close_thread_tables().
Other cleanups:
Cleanup COM_FIELD_LIST.
Don't call close_thread_tables() in COM_SHUTDOWN -- there
are no open tables there that can be closed (we leave
the locked tables mode in THD destructor, and this
close_thread_tables() won't leave it anyway).
Make open_and_lock_tables() and open_and_lock_tables_derived()
call close_thread_tables() upon failure.
Remove the calls to close_thread_tables() that are now
unnecessary.
Simplify the back off condition in Open_table_context.
Streamline metadata lock handling in LOCK TABLES
implementation.
Add asserts to ensure correct life cycle of
statement transaction in a session.
Remove a piece of dead code that has also become redundant
after the fix for Bug 37521.
mysql-test/r/variables.result:
Update results: set @@autocommit and statement transaction/
prelocked mode.
mysql-test/r/view.result:
A harmless change in CHECK TABLE <view> status for a broken view.
If previously a failure to prelock all functions used in a view
would leave the connection in LTM_PRELOCKED mode, now we call
close_thread_tables() from open_and_lock_tables()
and leave prelocked mode, thus some check in mysql_admin_table() that
works only in prelocked/locked tables mode is no longer activated.
mysql-test/suite/rpl/r/rpl_row_implicit_commit_binlog.result:
Fixed Bug#55452 "SET PASSWORD is replicated twice in
RBR mode": extra binlog events are gone from the
binary log.
mysql-test/t/variables.test:
Add a test case: set autocommit and statement transaction/prelocked
mode.
sql/event_data_objects.cc:
Simplify code in Event_job_data::execute().
Move sp_head memory management to lex_end().
sql/event_db_repository.cc:
Move the release of metadata locks outside
close_thread_tables().
Make sure we call close_thread_tables() when
open_and_lock_tables() fails and remove extra
code from the events data dictionary.
Use close_mysql_tables(), a new internal
function to properly close mysql.* tables
in the data dictionary.
Contract Event_db_repository::drop_events_by_field,
drop_schema_events into one function.
When dropping all events in a schema,
make sure we don't mistakenly release all
locks acquired by DROP DATABASE. These
include locks on the database name
and the global intention exclusive
metadata lock.
sql/event_db_repository.h:
Function open_event_table() does not require an instance
of Event_db_repository.
sql/events.cc:
Use close_mysql_tables() instead of close_thread_tables()
to bootstrap events, since the latter no longer
releases metadata locks.
sql/ha_ndbcluster.cc:
- mysql_rm_table_part2 no longer releases
acquired metadata locks. Do it in the caller.
sql/ha_ndbcluster_binlog.cc:
Deploy the new protocol for closing thread
tables in run_query() and ndb_binlog_index
code.
sql/handler.cc:
Assert that we never call ha_commit_trans/
ha_rollback_trans in sub-statement, which
is now the case.
sql/handler.h:
Add an accessor to check whether THD_TRANS object
is empty (has no transaction started).
sql/log.cc:
Update a comment.
sql/log_event.cc:
Since now we commit/rollback statement transaction in
mysql_execute_command(), we need a mechanism to communicate
from Query_log_event::do_apply_event() to mysql_execute_command()
that the statement transaction should be rolled back, not committed.
Ideally it would be a virtual method of THD. I hesitate
to make THD a virtual base class in this already large patch.
Use a thd->variables.option_bits for now.
Remove a call to close_thread_tables() from the slave IO
thread. It doesn't open any tables, and the protocol
for closing thread tables is more complicated now.
Make sure we properly close thread tables, however,
in Load_data_log_event, which doesn't
follow the standard server execution procedure
with mysql_execute_command().
@todo: this piece should use Server_runnable
framework instead.
Remove an unnecessary call to mysql_unlock_tables().
sql/rpl_rli.cc:
Update Relay_log_info::slave_close_thread_tables()
to follow the new close protocol.
sql/set_var.cc:
Remove an unused header.
sql/slave.cc:
Remove an unnecessary call to
close_thread_tables().
sql/sp.cc:
Remove unnecessary calls to close_thread_tables()
from SP DDL implementation. The tables will
be closed by the caller, in mysql_execute_command().
When dropping all routines in a database, make sure
to not mistakenly drop all metadata locks acquired
so far, they include the scoped lock on the schema.
sql/sp_head.cc:
Correct the protocol that closes thread tables
in an SP instruction.
Clear lex->sphead before cleaning up lex
with lex_end to make sure that we don't
delete the sphead twice. It's considered
to be "cleaner" and more in line with
future changes than calling delete lex->sphead
in other places that cleanup the lex.
sql/sp_head.h:
When destroying m_lex_keeper of an instruction,
don't delete the sphead that all lex objects
share.
@todo: don't store a reference to routine's sp_head
instance in instruction's lex.
sql/sql_acl.cc:
Don't call close_thread_tables() where the caller will
do that for us.
Fix Bug#55452 "SET PASSWORD is replicated twice in RBR
mode" by disabling RBR replication in change_password()
function.
Use close_mysql_tables() in bootstrap and ACL reload
code to make sure we release all metadata locks.
sql/sql_base.cc:
This is the main part of the patch:
- remove manipulation with thd->transaction
and thd->mdl_context from close_thread_tables().
Now this function is only responsible for closing
tables, nothing else.
This is necessary to be able to easily use
close_thread_tables() in procedures, that
involve multiple open/close tables, which all
need to be protected continuously by metadata
locks.
Add asserts ensuring that TABLE object
is only used when is protected by a metadata lock.
Simplify the back off condition of Open_table_context,
we no longer need to look at the autocommit mode.
Make open_and_lock_tables() and open_normal_and_derived_tables()
close thread tables and release metadata locks acquired so-far
upon failure. This simplifies their usage.
Implement close_mysql_tables().
sql/sql_base.h:
Add declaration for close_mysql_tables().
sql/sql_class.cc:
Remove a piece of dead code that has also become redundant
after the fix for Bug 37521.
The code became dead when my_eof() was made a non-protocol method,
but a method that merely modifies the diagnostics area.
The code became redundant with the fix for Bug#37521, when
we started to cal close_thread_tables() before
Protocol::end_statement().
sql/sql_do.cc:
Do nothing in DO if inside a substatement
(the assert moved out of trans_rollback_stmt).
sql/sql_handler.cc:
Add comments.
sql/sql_insert.cc:
Remove dead code.
Release metadata locks explicitly at the
end of the delayed insert thread.
sql/sql_lex.cc:
Add destruction of lex->sphead to lex_end(),
lex "reset" method called at the end of each statement.
sql/sql_parse.cc:
Move close_thread_tables() and other related
cleanups to mysql_execute_command()
from dispatch_command(). This has become
possible after the fix for Bug#37521.
Mark federated SERVER statements as DDL.
Next step: make sure that we don't store
eof packet in the query cache, and move
the query cache code outside mysql_parse.
Brush up the code of COM_FIELD_LIST.
Remove unnecessary calls to close_thread_tables().
When killing a query, don't report "OK"
if it was a suicide.
sql/sql_parse.h:
Remove declaration of a function that is now static.
sql/sql_partition.cc:
Remove an unnecessary call to close_thread_tables().
sql/sql_plugin.cc:
open_and_lock_tables() will clean up
after itself after a failure.
Move close_thread_tables() above
end: label, and replace with close_mysql_tables(),
which will also release the metadata lock
on mysql.plugin.
sql/sql_prepare.cc:
Now that we no longer release locks in close_thread_tables()
statement prepare code has become more straightforward.
Remove the now redundant check for thd->killed() (used
only by the backup project) from Execute_server_runnable.
Reorder code to take into account that now mysql_execute_command()
performs lex->unit.cleanup() and close_thread_tables().
sql/sql_priv.h:
Add a new option to server options to interact
between the slave SQL thread and execution
framework (hack). @todo: use a virtual
method of class THD instead.
sql/sql_servers.cc:
Due to Bug 25705 replication of
DROP/CREATE/ALTER SERVER is broken.
Make sure at least we do not attempt to
replicate these statements using RBR,
as this violates the assert in close_mysql_tables().
sql/sql_table.cc:
Do not release metadata locks in mysql_rm_table_part2,
this is done by the caller.
Do not call close_thread_tables() in mysql_create_table(),
this is done by the caller.
Fix a bug in DROP TABLE under LOCK TABLES when,
upon error in wait_while_table_is_used() we would mistakenly
release the metadata lock on a non-dropped table.
Explicitly release metadata locks when doing an implicit
commit.
sql/sql_trigger.cc:
Now that we delete lex->sphead in lex_end(),
zero the trigger's sphead in lex after loading
the trigger, to avoid double deletion.
sql/sql_udf.cc:
Use close_mysql_tables() instead of close_thread_tables().
sql/sys_vars.cc:
Remove code added in scope of WL#4284 which would
break when we perform set @@session.autocommit along
with setting other variables and using tables or functions.
A test case added to variables.test.
sql/transaction.cc:
Add asserts.
sql/tztime.cc:
Use close_mysql_tables() rather than close_thread_tables().
Fix warnings flagged by the new warning option -Wunused-but-set-variable
that was added to GCC 4.6 and that is enabled by -Wunused and -Wall. The
option causes a warning whenever a local variable is assigned to but is
later unused. It also warns about meaningless pointer dereferences.
client/mysql.cc:
Meaningless pointer dereferences.
client/mysql_upgrade.c:
Check whether reading from the file succeeded.
extra/comp_err.c:
Unused.
extra/yassl/src/yassl_imp.cpp:
Skip instead of reading data that is discarded.
include/my_pthread.h:
Variable is only used in debug builds.
include/mysys_err.h:
Add new error messages.
mysys/errors.c:
Add new error message for permission related functions.
mysys/mf_iocache.c:
Variable is only checked under THREAD.
mysys/my_copy.c:
Raise a error if chmod or chown fails.
mysys/my_redel.c:
Raise a error if chmod or chown fails.
regex/engine.c:
Use a equivalent variable for the assert.
server-tools/instance-manager/instance_options.cc:
Unused.
sql/field.cc:
Unused.
sql/item.cc:
Unused.
sql/log.cc:
Do not ignore the return value of freopen: only set buffer if
reopening succeeds.
Adjust doxygen comment to the right function.
Pass message lenght to log function.
sql/mysqld.cc:
Do not ignore the return value of freopen: only set buffer if
reopening succeeds.
sql/partition_info.cc:
Unused.
sql/slave.cc:
No need to set pointer to the address of '\0'.
sql/spatial.cc:
Unused. Left for historical purposes.
sql/sql_acl.cc:
Unused.
sql/sql_base.cc:
Pointers are always set to the same variables.
sql/sql_parse.cc:
End statement if reading fails.
Store the buffer after it has actually been updated.
sql/sql_repl.cc:
No need to set pointer to the address of '\0'.
sql/sql_show.cc:
Put variable under the same ifdef block.
sql/udf_example.c:
Set null pointer flag appropriately.
storage/csv/ha_tina.cc:
Meaningless dereferences.
storage/example/ha_example.cc:
Return the error since it's available.
storage/myisam/mi_locking.c:
Remove unused and dead code.
The issue was that we didn't always check result of ha_rnd_init() which caused a problem for handlers that returned an error in this code.
- Changed prototype of ha_rnd_init() to ensure that we get a compile warning if result is not checked.
- Added ha_rnd_init_with_error() that prints error on failure.
- Checked all usage of ha_rnd_init() and ensure we generate an error message on failures.
- Changed init_read_record() to return 1 on failure.
sql/create_options.cc:
Fixed wrong printf
sql/event_db_repository.cc:
Check result from init_read_record()
sql/events.cc:
Check result from init_read_record()
sql/filesort.cc:
Check result from ha_rnd_init()
sql/ha_partition.cc:
Check result from ha_rnd_init()
sql/ha_partition.h:
Fixed compiler warning
sql/handler.cc:
Added ha_rnd_init_with_error()
Check result from ha_rnd_init()
sql/handler.h:
Added ha_rnd_init_with_error()
Changed prototype of ha_rnd_init() to ensure that we get a compile warning if result is not checked
sql/item_subselect.cc:
Check result from ha_rnd_init()
sql/log.cc:
Check result from ha_rnd_init()
sql/log_event.cc:
Check result from ha_rnd_init()
sql/log_event_old.cc:
Check result from ha_rnd_init()
sql/mysql_priv.h:
init_read_record() now returns error code on failure
sql/opt_range.cc:
Check result from ha_rnd_init()
sql/records.cc:
init_read_record() now returns error code on failure
Check result from ha_rnd_init()
sql/sql_acl.cc:
Check result from init_read_record()
sql/sql_cursor.cc:
Print error if ha_rnd_init() fails
sql/sql_delete.cc:
Check result from init_read_record()
sql/sql_help.cc:
Check result from init_read_record()
sql/sql_plugin.cc:
Check result from init_read_record()
sql/sql_select.cc:
Check result from ha_rnd_init()
Print error if ha_rnd_init() fails.
sql/sql_servers.cc:
Check result from init_read_record()
sql/sql_table.cc:
Check result from init_read_record()
sql/sql_udf.cc:
Check result from init_read_record()
sql/sql_update.cc:
Check result from init_read_record()
storage/example/ha_example.cc:
Don't return error on rnd_init()
storage/ibmdb2i/ha_ibmdb2i.cc:
Removed not relevant comment
Essentially, the problem is that safemalloc is excruciatingly
slow as it checks all allocated blocks for overrun at each
memory management primitive, yielding a almost exponential
slowdown for the memory management functions (malloc, realloc,
free). The overrun check basically consists of verifying some
bytes of a block for certain magic keys, which catches some
simple forms of overrun. Another minor problem is violation
of aliasing rules and that its own internal list of blocks
is prone to corruption.
Another issue with safemalloc is rather the maintenance cost
as the tool has a significant impact on the server code.
Given the magnitude of memory debuggers available nowadays,
especially those that are provided with the platform malloc
implementation, maintenance of a in-house and largely obsolete
memory debugger becomes a burden that is not worth the effort
due to its slowness and lack of support for detecting more
common forms of heap corruption.
Since there are third-party tools that can provide the same
functionality at a lower or comparable performance cost, the
solution is to simply remove safemalloc. Third-party tools
can provide the same functionality at a lower or comparable
performance cost.
The removal of safemalloc also allows a simplification of the
malloc wrappers, removing quite a bit of kludge: redefinition
of my_malloc, my_free and the removal of the unused second
argument of my_free. Since free() always check whether the
supplied pointer is null, redudant checks are also removed.
Also, this patch adds unit testing for my_malloc and moves
my_realloc implementation into the same file as the other
memory allocation primitives.
client/mysqldump.c:
Pass my_free directly as its signature is compatible with the
callback type -- which wasn't the case for free_table_ent.
Apart strict-aliasing warnings, fix the remaining warnings
generated by GCC 4.4.4 -Wall and -Wextra flags.
One major source of warnings was the in-house function my_bcmp
which (unconventionally) took pointers to unsigned characters
as the byte sequences to be compared. Since my_bcmp and bcmp
are deprecated functions whose only difference with memcmp is
the return value, every use of the function is replaced with
memcmp as the special return value wasn't actually being used
by any caller.
There were also various other warnings, mostly due to type
mismatches, missing return values, missing prototypes, dead
code (unreachable) and ignored return values.
BUILD/SETUP.sh:
Remove flags that are implied by -Wall and -Wextra.
Do not warn about unused parameters in C++.
BUILD/check-cpu:
Print only the compiler version instead of verbose banner.
Although the option is gcc specific, the check was only
being used for GCC specific checks anyway.
client/mysql.cc:
bcmp is no longer defined.
client/mysqltest.cc:
Pass a string to function expecting a format string.
Replace use of bcmp with memcmp.
cmd-line-utils/readline/Makefile.am:
Always define _GNU_SOURCE when compiling GNU readline.
Required to make certain prototypes visible.
cmd-line-utils/readline/input.c:
Condition for the code to be meaningful.
configure.in:
Remove check for bcmp.
extra/comp_err.c:
Use appropriate type.
extra/replace.c:
Replace use of bcmp with memcmp.
extra/yassl/src/crypto_wrapper.cpp:
Do not ignore the return value of fgets. Retrieve the file
position if fgets succeed -- if it fails, the function will
bail out and return a error.
extra/yassl/taocrypt/include/blowfish.hpp:
Use a single array instead of accessing positions of the sbox_
through a subscript to pbox_.
extra/yassl/taocrypt/include/runtime.hpp:
One definition of such functions is enough.
extra/yassl/taocrypt/src/aes.cpp:
Avoid potentially ambiguous conditions.
extra/yassl/taocrypt/src/algebra.cpp:
Rename arguments to avoid shadowing related warnings.
extra/yassl/taocrypt/src/blowfish.cpp:
Avoid potentially ambiguous conditions.
extra/yassl/taocrypt/src/integer.cpp:
Do not define type within a anonymous union.
Use a variable to return a value instead of
leaving the result in a register -- compiler
does not know the logic inside the asm.
extra/yassl/taocrypt/src/misc.cpp:
Define handler for pure virtual functions.
Remove unused code.
extra/yassl/taocrypt/src/twofish.cpp:
Avoid potentially ambiguous conditions.
extra/yassl/testsuite/test.hpp:
Function must have C language linkage.
include/m_string.h:
Remove check which relied on bcmp being defined -- they weren't
being used as bcmp is only visible when _BSD_SOURCE is defined.
include/my_bitmap.h:
Remove bogus helpers which were used only in a few files and
were causing warnings about dead code.
include/my_global.h:
Due to G++ bug, always silence false-positive uninitialized
variables warnings when compiling C++ code with G++.
Remove bogus helper.
libmysql/Makefile.shared:
Remove built-in implementation of bcmp.
mysql-test/lib/My/SafeProcess/safe_process.cc:
Cast pid to largest possible type for a process identifier.
mysys/mf_loadpath.c:
Leave space of the ending nul.
mysys/mf_pack.c:
Replace bcmp with memcmp.
mysys/my_bitmap.c:
Dead code removal.
mysys/my_gethwaddr.c:
Remove unused variable.
mysys/my_getopt.c:
Silence bogus uninitialized variable warning.
Do not cast away the constant qualifier.
mysys/safemalloc.c:
Cast to expected type.
mysys/thr_lock.c:
Silence bogus uninitialized variable warning.
sql/field.cc:
Replace bogus helper with a more appropriate logic which is
used throughout the code.
sql/item.cc:
Remove bogus logical condition which always evaluates to TRUE.
sql/item_create.cc:
Simplify code to avoid signedness related warnings.
sql/log_event.cc:
Replace use of bcmp with memcmp.
No need to use helpers for simple bit operations.
sql/log_event_old.cc:
Replace bmove_align with memcpy.
sql/mysqld.cc:
Move use declaration of variable to the ifdef block where it
is used. Remove now-unnecessary casts and arguments.
sql/set_var.cc:
Replace bogus helpers with simple and classic bit operations.
sql/slave.cc:
Cast to expected type and silence bogus warning.
sql/sql_class.h:
Don't use enum values as bit flags, the supposed type safety is
bogus as the combined bit flags are not a value in the enumeration.
sql/udf_example.c:
Only declare variable when necessary.
sql/unireg.h:
Replace use of bmove_align with memcpy.
storage/innobase/os/os0file.c:
Silence bogus warning.
storage/myisam/mi_open.c:
Remove bogus cast, DBUG_DUMP expects a pointer to unsigned
char.
storage/myisam/mi_page.c:
Remove bogus cast, DBUG_DUMP expects a pointer to unsigned
char.
strings/bcmp.c:
Remove built-in bcmp.
strings/ctype-ucs2.c:
Silence bogus warning.
tests/mysql_client_test.c:
Use a appropriate type as expected by simple_command().
BUG#54872 MBR: replication failure caused by using tmp table inside transaction
Changed criteria to classify a statement as unsafe in order to reduce the
number of spurious warnings. So a statement is classified as unsafe when
there is on-going transaction at any point of the execution if:
1. The mixed statement is about to update a transactional table and
a non-transactional table.
2. The mixed statement is about to update a temporary transactional
table and a non-transactional table.
3. The mixed statement is about to update a transactional table and
read from a non-transactional table.
4. The mixed statement is about to update a temporary transactional
table and read from a non-transactional table.
5. The mixed statement is about to update a non-transactional table
and read from a transactional table when the isolation level is
lower than repeatable read.
After updating a transactional table if:
6. The mixed statement is about to update a non-transactional table
and read from a temporary transactional table.
7. The mixed statement is about to update a non-transactional table
and read from a temporary transactional table.
8. The mixed statement is about to update a non-transactionala table
and read from a temporary non-transactional table.
9. The mixed statement is about to update a temporary non-transactional
table and update a non-transactional table.
10. The mixed statement is about to update a temporary non-transactional
table and read from a non-transactional table.
11. A statement is about to update a non-transactional table and the
option variables.binlog_direct_non_trans_update is OFF.
The reason for this is that locks acquired may not protected a concurrent
transaction of interfering in the current execution and by consequence in
the result. So the patch reduced the number of spurious unsafe warnings.
Besides we fixed a regression caused by BUG#51894, which makes temporary
tables to go into the trx-cache if there is an on-going transaction. In
MIXED mode, the patch for BUG#51894 ignores that the trx-cache may have
updates to temporary non-transactional tables that must be written to the
binary log while rolling back the transaction.
So we fix this problem by writing the content of the trx-cache to the
binary log while rolling back a transaction if a non-transactional
temporary table was updated and the binary logging format is MIXED.
Conflicts:
Text conflict in mysql-test/r/archive.result
Contents conflict in mysql-test/r/innodb_bug38231.result
Text conflict in mysql-test/r/mdl_sync.result
Text conflict in mysql-test/suite/binlog/t/disabled.def
Text conflict in mysql-test/suite/rpl_ndb/r/rpl_ndb_binlog_format_errors.result
Text conflict in mysql-test/t/archive.test
Contents conflict in mysql-test/t/innodb_bug38231.test
Text conflict in mysql-test/t/mdl_sync.test
Text conflict in sql/sp_head.cc
Text conflict in sql/sql_show.cc
Text conflict in sql/table.cc
Text conflict in sql/table.h
This patch fixes two problems described as follows:
1 - If there is an on-going transaction and a temporary table is created or
dropped, any failed statement that follows the "create" or "drop commands"
triggers a rollback and by consequence the slave will go out sync because
the binary log will have a wrong sequence of events.
To fix the problem, we changed the expression that evaluates when the
cache should be flushed after either the rollback of a statment or
transaction.
2 - When a "CREATE TEMPORARY TABLE SELECT * FROM" was executed the
OPTION_KEEP_LOG was not set into the thd->options. For that reason, if
the transaction had updated only transactional engines and was rolled
back at the end (.e.g due to a deadlock) the changes were not written
to the binary log, including the creation of the temporary table.
To fix the problem, we have set the OPTION_KEEP_LOG into the thd->options
when a "CREATE TEMPORARY TABLE SELECT * FROM" is executed.
sql/log.cc:
Reorganized the code based on the following functions:
- bool ending_trans(const THD* thd, const bool all);
- bool trans_has_updated_non_trans_table(const THD* thd);
- bool trans_has_no_stmt_committed(const THD* thd, const bool all);
- bool stmt_has_updated_non_trans_table(const THD* thd);
sql/log.h:
Added functions to organize the code in log.cc.
sql/log_event.cc:
Removed the OPTION_KEEP_LOG since it must be used only when
creating and dropping temporary tables.
sql/log_event_old.cc:
Removed the OPTION_KEEP_LOG since it must be used only when
creating and dropping temporary tables.
sql/sql_parse.cc:
When a "CREATE TEMPORARY TABLE SELECT * FROM" was executed the
OPTION_KEEP_LOG was not set into the thd->options.
To fix the problem, we have set the OPTION_KEEP_LOG into the
thd->options when a "CREATE TEMPORARY TABLE SELECT * FROM"
is executed.
MYSQL_BIN_LOG m_table_map_version member and it's associated
functions were not used in the logic of binlogging and replication,
this patch removed all related code.
sql/log.cc:
removed unused m_table_map_version variable and functions
sql/log.h:
removed unused m_table_map_version variable and functions
sql/log_event.h:
Removed unused LOG_EVENT_UPDATE_TABLE_MAP_VERSION_F flag
sql/sql_class.cc:
Removed unused LOG_EVENT_UPDATE_TABLE_MAP_VERSION_F flag
sql/sql_load.cc:
Removed unused LOG_EVENT_UPDATE_TABLE_MAP_VERSION_F flag
sql/table.cc:
removed unused table_map_version variable
sql/table.h:
removed unused table_map_version variable
transaction
BUG#52616 Temp table prevents switch binlog format from STATEMENT to ROW
Before the WL#2687 and BUG#46364, every non-transactional change that happened
after a transactional change was written to trx-cache and flushed upon
committing the transaction. WL#2687 and BUG#46364 changed this behavior and
non-transactional changes are now written to the binary log upon committing
the statement.
A binary log event is identified as transactional or non-transactional through
a flag in the Log_event which is set taking into account the underlie storage
engine on what it is stems from. In the current bug, this flag was not being
set properly when the DROP TEMPORARY TABLE was executed.
However, while fixing this bug we figured out that changes to temporary tables
should be always written to the trx-cache if there is an on-going transaction.
Otherwise, binlog events in the reversed order would be produced.
Regarding concurrency, keeping changes to temporary tables in the trx-cache is
also safe as temporary tables are only visible to the owner connection.
In this patch, we classify the following statements as unsafe:
1 - INSERT INTO t_myisam SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_myisam
3 - CREATE TEMPORARY TABLE t_myisam_temp SELECT * FROM t_myisam
On the other hand, the following statements are classified as safe:
1 - INSERT INTO t_innodb SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_innodb
The patch also guarantees that transactions that have a DROP TEMPORARY are
always written to the binary log regardless of the mode and the outcome:
commit or rollback. In particular, the DROP TEMPORARY is extended with the
IF EXISTS clause when the current statement logging format is set to row.
Finally, the patch allows to switch from STATEMENT to MIXED/ROW when there
are temporary tables but the contrary is not possible.
mysql-test/extra/rpl_tests/rpl_binlog_max_cache_size.test:
Updated the test case because
CREATE TEMPORARY TABLE t_innodb_temp SELECT * FROM t_myisam is not unsafe.
mysql-test/extra/rpl_tests/rpl_implicit_commit_binlog.test:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/extra/rpl_tests/rpl_innodb.test:
Removed comments from the test case that became false after the patch.
mysql-test/extra/rpl_tests/rpl_loaddata.test:
Suppressed warning messages due to the following cases:
1 - INSERT INTO t_myisam SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_myisam
mysql-test/include/ctype_utf8_table.inc:
Suppressed warning messages due to the following cases:
1 - INSERT INTO t_myisam SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_myisam
mysql-test/r/ctype_cp932_binlog_stm.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/binlog/r/binlog_database.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/binlog/r/binlog_innodb_row.result:
Updated the result file.
mysql-test/suite/binlog/r/binlog_multi_engine.result:
Updated the unsafe message.
mysql-test/suite/binlog/r/binlog_row_binlog.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/binlog/r/binlog_row_drop_tmp_tbl.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/binlog/r/binlog_row_mix_innodb_myisam.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/binlog/r/binlog_stm_binlog.result:
Updated the result file.
mysql-test/suite/binlog/r/binlog_stm_mix_innodb_myisam.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/binlog/t/binlog_tmp_table.test:
Suppressed warning messages due to the following cases:
1 - INSERT INTO t_myisam SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_myisam
mysql-test/suite/ndb/r/ndb_binlog_format.result:
Updated the unsafe message.
mysql-test/suite/rpl/r/rpl_concurrency_error.result:
Updated the unsafe message.
mysql-test/suite/rpl/r/rpl_mixed_binlog_max_cache_size.result:
Updated the result file because
CREATE TEMPORARY TABLE t_innodb_temp SELECT * FROM t_myisam is not unsafe.
mysql-test/suite/rpl/r/rpl_mixed_implicit_commit_binlog.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/rpl/r/rpl_mixed_mixing_engines.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/rpl/r/rpl_mixed_row_innodb.result:
Added some comments to ease the understanding of the result file.
mysql-test/suite/rpl/r/rpl_non_direct_mixed_mixing_engines.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/rpl/r/rpl_non_direct_row_mixing_engines.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/rpl/r/rpl_non_direct_stm_mixing_engines.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/rpl/r/rpl_row_drop.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/rpl/r/rpl_row_implicit_commit_binlog.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/rpl/r/rpl_row_mixing_engines.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/rpl/r/rpl_stm_binlog_max_cache_size.result:
Updated the result file because
CREATE TEMPORARY TABLE t_innodb_temp SELECT * FROM t_myisam is not unsafe.
mysql-test/suite/rpl/r/rpl_stm_implicit_commit_binlog.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/rpl/r/rpl_stm_innodb.result:
Added some comments to ease the understanding of the result file.
mysql-test/suite/rpl/r/rpl_stm_mixing_engines.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/rpl/r/rpl_stm_stop_middle_group.result:
Updated the unsafe message.
mysql-test/suite/rpl/r/rpl_temp_temporary.result:
Added a test case.
mysql-test/suite/rpl/t/rpl000013.test:
Suppressed warning messages due to the following cases:
1 - INSERT INTO t_myisam SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_myisam
3 - CREATE TEMPORARY TABLE t_myisam_temp SELECT * FROM t_myisam
mysql-test/suite/rpl/t/rpl_misc_functions.test:
Suppressed warning messages.
mysql-test/suite/rpl/t/rpl_temp_table.test:
Suppressed warning messages due to the following cases:
1 - INSERT INTO t_myisam SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_myisam
3 - CREATE TEMPORARY TABLE t_myisam_temp SELECT * FROM t_myisam
mysql-test/suite/rpl/t/rpl_temp_temporary.test:
Added a test case.
mysql-test/suite/rpl/t/rpl_temporary.test:
Suppressed warning messages due to the following cases:
1 - INSERT INTO t_myisam SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_myisam
3 - CREATE TEMPORARY TABLE t_myisam_temp SELECT * FROM t_myisam
mysql-test/suite/rpl_ndb/r/rpl_ndb_row_implicit_commit_binlog.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/rpl_ndb/r/rpl_truncate_7ndb.result:
Updated the test case to remove references to positions
in the binary log.
mysql-test/suite/rpl_ndb/t/rpl_truncate_7ndb.test:
Updated the test case to remove references to positions
in the binary log.
mysql-test/t/create_select_tmp.test:
Suppressed warning messages due to the following cases:
1 - INSERT INTO t_myisam SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_myisam
3 - CREATE TEMPORARY TABLE t_myisam_temp SELECT * FROM t_myisam
mysql-test/t/ctype_cp932_binlog_stm.test:
Suppressed warning messages due to the following cases:
1 - INSERT INTO t_myisam SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_myisam
3 - CREATE TEMPORARY TABLE t_myisam_temp SELECT * FROM t_myisam
mysql-test/t/mysqlbinlog.test:
Suppressed warning messages due to the following cases:
1 - INSERT INTO t_myisam SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_myisam
3 - CREATE TEMPORARY TABLE t_myisam_temp SELECT * FROM t_myisam
sql/log.cc:
Improved the code by creating several functions to hide decision
on type of engine changed, commit/abort, etc:
. stmt_has_updated_non_trans_table
. trans_has_updated_non_trans_table
. ending_trans
Updated the binlog_rollback function and the use of the
OPTION_KEEP_LOG which indincates when a temporary table was
either created or dropped and as such the command must be
logged if not in MIXED mode and even while rolling back the
transaction.
sql/log.h:
Improved the code by creating several functions to hide decision
on type of engine changed, commit/abort, etc.
sql/log_event.cc:
Removed the setting of the OPTION_KEEP_LOG as it is related to CREATE
TEMPORARY and DROP TEMPORARY and not to the type of engine (i.e.
transactional or non-transactional).
sql/log_event_old.cc:
Removed the setting of the OPTION_KEEP_LOG as it is related to CREATE
TEMPORARY and DROP TEMPORARY and not to the type of engine (i.e.
transactional or non-transactional).
sql/share/errmsg-utf8.txt:
Updated the unsafe message.
sql/sql_class.cc:
Classifies the following statements as unsafe:
1 - INSERT INTO t_myisam SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_myisam
On the other hand, the following statements are classified as safe:
1 - INSERT INTO t_innodb SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_innodb
sql/sql_class.h:
It allows to switch from STATEMENT to MIXED/ROW when there are temporary
tables but the contrary is not possible.
sql/sql_table.cc:
Fixed the case that a DROP/DROP TEMPORARY that affects a temporary table in MIXED
mode is written as a DROP TEMPORARY TABLE IF EXISTS because the table may not exist in the slave and due to the IF EXISTS token an error will never happen
while processing the statement in the slave.
Removed a function that was not being used.
Adding my_global.h first in all files using
NO_EMBEDDED_ACCESS_CHECKS.
Correcting a merge problem resulting from a changed definition
of check_some_access compared to the original patches.
Removed random failures from test suite
mysql-test/extra/rpl_tests/rpl_insert_id_pk.test:
Make test predicatable.
mysql-test/include/maria_empty_logs.inc:
We can't use 'Threads_connected' for syncronization, as the 'check_warnings' thread that just quit may still be counted in 'Threads_connected'
Now we just wait until MySQLD answers again, which should be good enough for our purposes
mysql-test/suite/binlog/r/binlog_index.result:
Updated results file
mysql-test/suite/binlog/t/binlog_index-master.opt:
Added option file to not get stack traces in .err file.
mysql-test/suite/binlog/t/binlog_index.test:
Added 'flush tables' to remove warning about crashed suppression file from logs
mysql-test/suite/pbxt/r/multi_statement.result:
Updated results
mysql-test/suite/pbxt/t/multi_statement-master.opt:
Added options so that slow query testing makes sense
sql/events.cc:
Don't write Event Scheduler startup message if warnings are turned off.
sql/handler.cc:
Removed compiler warning
sql/log.cc:
Removed compiler warning
sql/mysqld.cc:
Added option 'test-expect-abort'; If this is set, we don't write message to log in case of 'DBUG_ABORT'.
(Gives us smaller, easier to read log files)
sql/set_var.cc:
Removed compiler warning
sql/slave.cc:
Removed compiler warning
sql/sql_plugin.cc:
Don't write warnings about disabled plugin if using --log_warnings=0
storage/xtradb/include/ut0lst.h:
Removed compiler warning
support-files/compiler_warnings.supp:
Supress warning from xtradb
Conflicts:
Text conflict in mysql-test/suite/binlog/r/binlog_row_mix_innodb_myisam.result
Text conflict in sql/log.cc
Text conflict in sql/set_var.cc
Text conflict in sql/sql_class.cc
Interface for maria extensions.
Alternative plugin interface with additional info (maturity and string version).
CMakeLists.txt:
Maria plugin interface used.
config/ac-macros/plugins.m4:
Maria plugin interface used.
configure.in:
Maria plugin interface used.
include/mysql/plugin.h:
Maria plugin interface added.
include/mysql/plugin_auth.h.pp:
Maria plugin interface added.
plugin/auth/auth_socket.c:
Maria plugin interface added.
plugin/auth/dialog.c:
Maria plugin interface added.
plugin/daemon_example/daemon_example.cc:
Maria plugin interface added.
plugin/fulltext/plugin_example.c:
Maria plugin interface added.
sql/ha_ndbcluster.cc:
Maria plugin interface added.
sql/ha_partition.cc:
Maria plugin interface added.
sql/log.cc:
Maria plugin interface added.
sql/sql_acl.cc:
Maria plugin interface added.
sql/sql_builtin.cc.in:
Maria plugin interface used.
sql/sql_plugin.cc:
Maria plugin interface added.
sql/sql_plugin.h:
Maria plugin interface used.
sql/sql_show.cc:
Maria plugin interface added.
storage/archive/ha_archive.cc:
Maria plugin interface added.
storage/blackhole/ha_blackhole.cc:
Maria plugin interface added.
storage/csv/ha_tina.cc:
Maria plugin interface added.
storage/example/ha_example.cc:
Maria plugin interface added.
storage/federated/ha_federated.cc:
Maria plugin interface added.
storage/federatedx/ha_federatedx.cc:
Maria plugin interface added.
storage/heap/ha_heap.cc:
Maria plugin interface added.
storage/ibmdb2i/ha_ibmdb2i.cc:
Maria plugin interface added.
storage/innobase/handler/ha_innodb.cc:
Maria plugin interface added.
storage/innodb_plugin/handler/i_s.cc:
Maria plugin interface added.
storage/maria/ha_maria.cc:
Maria plugin interface added.
storage/myisam/ha_myisam.cc:
Maria plugin interface added.
storage/myisammrg/ha_myisammrg.cc:
Maria plugin interface added.
storage/pbxt/src/ha_pbxt.cc:
Maria plugin interface added.
storage/xtradb/handler/ha_innodb.cc:
Maria plugin interface added.
storage/xtradb/handler/i_s.cc:
Maria plugin interface added.
storage/xtradb/handler/i_s.h:
Maria plugin interface added.
Fixed valgrind warnings found from running main.connect under valgrind
sql/sp_head.cc:
Ensure that vcol_info is reset
sql/sql_acl.cc:
Fixed usage of wrong memroot for password
sql/sql_yacc.yy:
Ensure that vcol_info is reset
This patch:
- Moves all definitions from the mysql_priv.h file into
header files for the component where the variable is
defined
- Creates header files if the component lacks one
- Eliminates all include directives from mysql_priv.h
- Eliminates all circular include cycles
- Rename time.cc to sql_time.cc
- Rename mysql_priv.h to sql_priv.h
BUG#46364 introduced the flag binlog_direct_non_transactional_updates which
would make N-changes to be written to the binary log upon committing the
statement when "ON". On the other hand, when "OFF" the option was supposed
to mimic the behavior in 5.1. However, the implementation was not mimicking
the behavior correctly and the following bugs popped up:
Case #1: N-changes executed within a transaction would go into
the S-cache. When later in the same transaction a
T-change occurs, N-changes following it were written
to the T-cache instead of the S-cache. In some cases,
this raises problems. For example, a
Table_map_log_event being written initially into the
S-cache, together with the initial N-changes, would be
absent from the T-cache. This would log N-changes
orphaned from a Table_map_log_event (thence discarded
at the slave). (MIXED and ROW)
Case #2: When rolling back a transaction, the N-changes that
might be in the T-cache were disregarded and
truncated along with the T-changes. (MIXED and ROW)
Case #3: When a MIXED statement (TN) is ahead of any other
T-changes in the transaction and it fails, it is kept
in the T-cache until the transaction ends. This is
not the case in 5.1 or Betony (5.5.2). In these, the
failed TN statement would be written to the binlog at
the same instant it had failed and not deferred until
transaction end. (SBR)
To fix these problems, we have decided to do what follows:
For Case #1 and #2, we circumvent them:
1. by not letting binlog_direct_non_transactional_updates
affect MIXED and RBR. These modes will keep the behavior
provided by WL#2687. Although this will make Celosia to
behave differently from 5.1, an execution will be always
safe under such modes in the sense that slaves will never
go out sync. In 5.1, using either MIXED or ROW while
mixing N-statements and T-statements was not safe.
For Case #3, we don't actually fix it. We:
1. keep it and make all MIXED statements whether they end
up failing or not or whether they are up front in the
transaction or after some transactional change to always
be stored in the T-cache. This means that it is written
to the binary log on transaction commit/rollback only.
2. We make the warning message even more specific about the
MIXED statement and SBR.
mysql-test/extra/rpl_tests/rpl_mixing_engines.test:
Updated the test case to avoid checking inconsistencies between the master and slave
when session.binlog_direct_non_transactional_updates is ON and the format is statement.
In this scenario, they will diverge because a counter (within a triger) is incremented
and associated to the issued statement. However, an n-statement is logged ahead of
the transaction and thus is not executed by the same order in the slave and thus gets
a different value from the counter.
mysql-test/suite/binlog/r/binlog_multi_engine.result:
Updated the test case with the new error ER_BINLOG_UNSAFE_MIXED_STATEMENT.
mysql-test/suite/binlog/r/binlog_stm_mix_innodb_myisam.result:
Updated the test case with the new error ER_BINLOG_UNSAFE_MIXED_STATEMENT.
mysql-test/suite/ndb/r/ndb_binlog_format.result:
Updated the test case with the new error ER_BINLOG_UNSAFE_MIXED_STATEMENT.
mysql-test/suite/rpl/r/rpl_concurrency_error.result:
Updated the test case with the new error ER_BINLOG_UNSAFE_MIXED_STATEMENT.
mysql-test/suite/rpl/r/rpl_stm_binlog_max_cache_size.result:
Updated the test case with the new error ER_BINLOG_UNSAFE_MIXED_STATEMENT.
mysql-test/suite/rpl/r/rpl_stm_mixing_engines.result:
Updated the test case with the new error ER_BINLOG_UNSAFE_MIXED_STATEMENT.
mysql-test/suite/rpl/r/rpl_stm_stop_middle_group.result:
Updated the test case with the new error ER_BINLOG_UNSAFE_MIXED_STATEMENT.
sql/log.cc:
Checked if either a trx-cache or a non-trx-cache should be used.
If bin_log_direct_non_trans_update is active or the format is either
MIXED or ROW, the cache to be used depends on the flag is_transactional.
When the format is STMT, the non-trx-cache should be used if the statement
is non-transactional and the trx-cache is empty, i.e. if any transactional
statement has not committed yet. Otherwise, the trx-cache should be used.
sql/share/errmsg-utf8.txt:
Added the new unsafe error ER_BINLOG_UNSAFE_MIXED_STATEMENT.
sql/sql_class.cc:
Started printing ER_BINLOG_UNSAFE_MIXED_STATEMENT, when there
is a mixed-statement.
Organized the names of the variables and added comments.
sql/sql_lex.cc:
Added the new unsafe error ER_BINLOG_UNSAFE_MIXED_STATEMENT.
sql/sql_lex.h:
Added the new unsafe error ER_BINLOG_UNSAFE_MIXED_STATEMENT.
Conflicts:
Text conflict in client/mysqlbinlog.cc
Text conflict in mysql-test/Makefile.am
Text conflict in mysql-test/collections/default.daily
Text conflict in mysql-test/r/mysqlbinlog_row_innodb.result
Text conflict in mysql-test/suite/rpl/r/rpl_typeconv_innodb.result
Text conflict in mysql-test/suite/rpl/t/rpl_get_master_version_and_clock.test
Text conflict in mysql-test/suite/rpl/t/rpl_row_create_table.test
Text conflict in mysql-test/suite/rpl/t/rpl_slave_skip.test
Text conflict in mysql-test/suite/rpl/t/rpl_typeconv_innodb.test
Text conflict in mysys/charset.c
Text conflict in sql/field.cc
Text conflict in sql/field.h
Text conflict in sql/item.h
Text conflict in sql/item_func.cc
Text conflict in sql/log.cc
Text conflict in sql/log_event.cc
Text conflict in sql/log_event_old.cc
Text conflict in sql/mysqld.cc
Text conflict in sql/rpl_utility.cc
Text conflict in sql/rpl_utility.h
Text conflict in sql/set_var.cc
Text conflict in sql/share/Makefile.am
Text conflict in sql/sql_delete.cc
Text conflict in sql/sql_plugin.cc
Text conflict in sql/sql_select.cc
Text conflict in sql/sql_table.cc
Text conflict in storage/example/ha_example.h
Text conflict in storage/federated/ha_federated.cc
Text conflict in storage/myisammrg/ha_myisammrg.cc
Text conflict in storage/myisammrg/myrg_open.c
When mysqlbinlog was given the --database=X flag, it always printed
'ROLLBACK TO', but the corresponding 'SAVEPOINT' statement was not
printed. The replicated filter(replicated-do/ignore-db) and binlog
filter (binlog-do/ignore-db) has the same problem. They are solved
in this patch together.
After this patch, We always check whether the query is 'SAVEPOINT'
statement or not. Because this is a literal check, 'SAVEPOINT' and
'ROLLBACK TO' statements are also binlogged in uppercase with no
any comments.
The binlog before this patch can be handled correctly except one case
that any comments are in front of the keywords. for example:
/* bla bla */ SAVEPOINT a;
/* bla bla */ ROLLBACK TO a;
Conflicts:
Text conflict in mysql-test/r/partition_innodb.result
Text conflict in sql/field.h
Text conflict in sql/item.h
Text conflict in sql/item_cmpfunc.h
Text conflict in sql/item_sum.h
Text conflict in sql/log_event_old.cc
Text conflict in sql/protocol.cc
Text conflict in sql/sql_select.cc
Text conflict in sql/sql_yacc.yy
for InnoDB
The class Field_bit_as_char stores the metadata for the
field incorrecly because bytes_in_rec and bit_len are set
to (field_length + 7 ) / 8 and 0 respectively, while
Field_bit has the correct values field_length / 8 and
field_length % 8.
Solved the problem by re-computing the values for the
metadata based on the field_length instead of using the
bytes_in_rec and bit_len variables.
To handle compatibility with old server, a table map
flag was added to indicate that the bit computation is
exact. If the flag is clear, the slave computes the
number of bytes required to store the bit field and
compares that instead, effectively allowing replication
*without conversion* from any field length that require
the same number of bytes to store.
mysql-test/suite/rpl/t/rpl_typeconv_innodb.test:
Adding test to check compatibility for bit field
replication when using InnoDB
sql/field.cc:
Extending compatible_field_size() with flags from
table map to allow fields to check master info.
sql/field.h:
Extending compatible_field_size() with flags from
table map to allow fields to check master info.
sql/log.cc:
Removing table map flags since they are not used
outside table map class.
sql/log_event.cc:
Removing flags parameter from table map constructor
since it is not used and does not have to be exposed.
sql/log_event.h:
Adding flag to denote that bit length for bit field type
is exact and not potentially rounded to even bytes.
sql/rpl_utility.cc:
Adding fields to table_def to store table map flags.
sql/rpl_utility.h:
Removing obsolete comment and adding flags to store
table map flags from master.
In BUG#49562 we fixed the case where numeric user var events
would not serialize the flag stating whether the value was signed
or unsigned (unsigned_flag). This fixed the case that the slave
would get an overflow while treating the unsigned values as
signed.
In this bug, we find that the unsigned_flag can sometimes change
between the moment that the user value is recorded for binlogging
purposes and the actual binlogging time. Since we take the
unsigned_flag from the runtime variable data, at binlogging time,
and the variable value is comes from the copy taken earlier in
the execution, there may be inconsistency in the
User_var_log_event between the variable value and its
unsigned_flag.
We fix this by also copying the unsigned_flag of the
user_var_entry when its value is copied, for binlogging
purposes. Later, at binlogging time, we use the copied
unsigned_flag and not the one in the runtime user_var_entry
instance.
mode
When the master was executing in sql_mode='traditional' (which
implies that really_abort_on_warning returns TRUE - because of
MODE_STRICT_ALL_TABLES), the error code (ER_DUP_ENTRY in the
reported case) was not being set in the
Query_log_event. Therefore, even if a failure was to be expected
when replaying the statement on the slave, a failure would occur,
because the Query_log_event was not transporting the expected
error code, but 0 instead.
This was because when the master was getting the error code to
set it in the Query_log_event, the executing thread would be
assumed to have been killed:
THD::killed==THD::KILL_BAD_DATA. This would make the error code
fetch routine not to check thd->main_da.sql_errno(), but instead
the thd->killed value. What's more, is that the server would
thd->killed value if thd->killed == THD::KILL_BAD_DATA and return
0 instead. So this is a double inconsistency, as the we should
not even check thd->killed but rather thd->main_da.sql_errno().
We fix this by extending the condition used to choose whether to
check the thd->main_da.sql_errno() or thd->killed, so that it
takes into consideration the case when:
thd->killed==THD::KILL_BAD_DATA.
mysql-test/t/disabled.def:
Restore disabled ssl tests: SSL certificates were updated.
Disable sp_sync.test, the test case can't work in next-4284.
mysql-test/t/partition_innodb.test:
Disable parsing of the test case for Bug#47343,
the test can not work in next-4284.
mysql-test/t/ps_ddl.test:
Update results (CREATE TABLE IF NOT EXISTS takes
into account existence of the temporary table).
Cherry-pick a fix Bug#37148 from next-mr, to preserve
file ids of the added files, and ensure that all the necessary
changes have been pulled.
Since initially Bug#37148 was null-merged into 6.0,
the changeset that is now being cherry-picked was likewise
null merged into next-4284.
Now that Bug#37148 has been reapplied to 6.0, try to make
it work with next-4284. This is also necessary to be able
to pull other changes from 5.1-rep into next-4284.
To resolve the merge issues use this changeset applied
to 6.0:
revid:jperkin@sun.com-20091216103628-ylhqf7s6yegui2t9
revno: 3776.1.1
committer: He Zhenxing <zhenxing.he@sun.com>
branch nick: 6.0-codebase-bugfixing
timestamp: Thu 2009-12-17 17:02:50 +0800
message:
Fix merge problem with Bug#37148
Conflicts:
- mysql-test/r/mysqld--help-win.result
- sql/sys_vars.cc
Original revsion (in next-mr-bugfixing):
------------------------------------------------------------
revno: 2971 [merge]
revision-id: alfranio.correia@sun.com-20100121210527-rbuheu5rnsmcakh1
committer: Alfranio Correia <alfranio.correia@sun.com>
branch nick: mysql-next-mr-bugfixing
timestamp: Thu 2010-01-21 21:05:27 +0000
message:
BUG#46364 MyISAM transbuffer problems (NTM problem)
It is well-known that due to concurrency issues, a slave can become
inconsistent when a transaction contains updates to both transaction and
non-transactional tables.
In a nutshell, the current code-base tries to preserve causality among the
statements by writing non-transactional statements to the txn-cache which
is flushed upon commit. However, modifications done to non-transactional
tables on behalf of a transaction become immediately visible to other
connections but may not immediately get into the binary log and therefore
consistency may be broken.
In general, it is impossible to automatically detect causality/dependency
among statements by just analyzing the statements sent to the server. This
happen because dependency may be hidden in the application code and it is
necessary to know a priori all the statements processed in the context of
a transaction such as in a procedure. Moreover, even for the few cases that
we could automatically address in the server, the computation effort
required could make the approach infeasible.
So, in this patch we introduce the option
- "--binlog-direct-non-transactional-updates" that can be used to bypass
the current behavior in order to write directly to binary log statements
that change non-transactional tables.
Besides, it is used to enable the WL#2687 which is disabled by default.
------------------------------------------------------------
revno: 2970.1.1
revision-id: alfranio.correia@sun.com-20100121131034-183r4qdyld7an5a0
parent: alik@sun.com-20100121083914-r9rz2myto3tkdya0
committer: Alfranio Correia <alfranio.correia@sun.com>
branch nick: mysql-next-mr-bugfixing
timestamp: Thu 2010-01-21 13:10:34 +0000
message:
BUG#46364 MyISAM transbuffer problems (NTM problem)
It is well-known that due to concurrency issues, a slave can become
inconsistent when a transaction contains updates to both transaction and
non-transactional tables.
In a nutshell, the current code-base tries to preserve causality among the
statements by writing non-transactional statements to the txn-cache which
is flushed upon commit. However, modifications done to non-transactional
tables on behalf of a transaction become immediately visible to other
connections but may not immediately get into the binary log and therefore
consistency may be broken.
In general, it is impossible to automatically detect causality/dependency
among statements by just analyzing the statements sent to the server. This
happen because dependency may be hidden in the application code and it is
necessary to know a priori all the statements processed in the context of
a transaction such as in a procedure. Moreover, even for the few cases that
we could automatically address in the server, the computation effort
required could make the approach infeasible.
So, in this patch we introduce the option
- "--binlog-direct-non-transactional-updates" that can be used to bypass
the current behavior in order to write directly to binary log statements
that change non-transactional tables.
Besides, it is used to enable the WL#2687 which is disabled by default.
To 5.x Release
Notes
=====
This is a backport of BUG#23300 into 5.1 GA.
Original cset revid (in betony):
luis.soares@sun.com-20090929140901-s4kjtl3iiyy4ls2h
Description
===========
When using replication, the slave will not log any slow query
logs queries replicated from the master, even if the
option "--log-slow-slave-statements" is set and these take more
than "log_query_time" to execute.
In order to log slow queries in replicated thread one needs to
set the --log-slow-slave-statements, so that the SQL thread is
initialized with the correct switch. Although setting this flag
correctly configures the slave thread option to log slow queries,
there is an issue with the condition that is used to check
whether to log the slow query or not. When replaying binlog
events the statement contains the SET TIMESTAMP clause which will
force the slow logging condition check to fail. Consequently, the
slow query logging will not take place.
This patch addresses this issue by removing the second condition
from the log_slow_statements as it prevents slow queries to be
binlogged and seems to be deprecated.
condition variable per context instead of one mutex and one conditional
variable for the whole subsystem.
This should increase concurrency in this subsystem.
It also opens the way for further changes which are necessary to solve
such bugs as bug #46272 "MySQL 5.4.4, new MDL: unnecessary deadlock"
and bug #37346 "innodb does not detect deadlock between update and alter
table".
Two other notable changes done by this patch:
- MDL subsystem no longer implicitly acquires global intention exclusive
metadata lock when per-object metadata lock is acquired. Now this has
to be done by explicit calls outside of MDL subsystem.
- Instead of using separate MDL_context for opening system tables/tables
for purposes of I_S we now create MDL savepoint in the main context
before opening tables and rollback to this savepoint after closing
them. This means that it is now possible to get ER_LOCK_DEADLOCK error
even not inside a transaction. This might happen in unlikely case when
one runs DDL on one of system tables while also running DDL on some
other tables. Cases when this ER_LOCK_DEADLOCK error is not justified
will be addressed by advanced deadlock detector for MDL subsystem which
we plan to implement.
mysql-test/include/handler.inc:
Adjusted handler_myisam.test and handler_innodb.test to the fact that
exclusive metadata locks on tables are now acquired according to
alphabetical order of fully qualified table names instead of order
in which tables are mentioned in statement.
mysql-test/r/handler_innodb.result:
Adjusted handler_myisam.test and handler_innodb.test to the fact that
exclusive metadata locks on tables are now acquired according to
alphabetical order of fully qualified table names instead of order
in which tables are mentioned in statement.
mysql-test/r/handler_myisam.result:
Adjusted handler_myisam.test and handler_innodb.test to the fact that
exclusive metadata locks on tables are now acquired according to
alphabetical order of fully qualified table names instead of order
in which tables are mentioned in statement.
mysql-test/r/mdl_sync.result:
Adjusted mdl_sync.test to the fact that exclusive metadata locks on
tables are now acquired according to alphabetical order of fully
qualified table names instead of order in which tables are mentioned
in statement.
mysql-test/t/mdl_sync.test:
Adjusted mdl_sync.test to the fact that exclusive metadata locks on
tables are now acquired according to alphabetical order of fully
qualified table names instead of order in which tables are mentioned
in statement.
sql/events.cc:
Instead of using separate MDL_context for opening system tables we now
create MDL savepoint in the main context before opening such tables
and rollback to this savepoint after closing them. To support this
change methods of THD responsible for saving/restoring open table
state were changed to use Open_tables_backup class which in addition
to Open_table_state has a member for this savepoint. As result code
opening/closing system tables was changed to use Open_tables_backup
instead of Open_table_state class as well.
sql/ha_ndbcluster.cc:
Since manipulations with open table state no longer install proxy
MDL_context it does not make sense to perform them in order to
satisfy assert in mysql_rm_tables_part2(). Removed them per agreement
with Cluster team. This has not broken test suite since scenario in
which deadlock can occur and assertion fails is not covered by tests.
sql/lock.cc:
MDL subsystem no longer implicitly acquires global intention exclusive
metadata lock when per-object exclusive metadata lock is acquired.
Now this has to be done by explicit calls outside of MDL subsystem.
sql/log.cc:
Instead of using separate MDL_context for opening system tables we now
create MDL savepoint in the main context before opening such tables
and rollback to this savepoint after closing them. To support this
change methods of THD responsible for saving/restoring open table
state were changed to use Open_tables_backup class which in addition
to Open_table_state has a member for this savepoint. As result code
opening/closing system tables was changed to use Open_tables_backup
instead of Open_table_state class as well.
sql/mdl.cc:
Changed metadata locking subsystem to use mutex per lock and condition
variable per context instead of one mutex and one conditional variable
for the whole subsystem.
Changed approach to handling of global metadata locks. Instead of
implicitly acquiring intention exclusive locks when user requests
per-object upgradeable or exclusive locks now we require them to be
acquired explicitly in the same way as ordinary metadata locks.
In fact global lock are now ordinary metadata locks in new GLOBAL
namespace.
To implement these changes:
- Removed LOCK_mdl mutex and COND_mdl condition variable.
- Introduced MDL_lock::m_mutex mutexes which protect individual lock
objects.
- Replaced mdl_locks hash with MDL_map class, which has hash for
MDL_lock objects as a member and separate mutex which protects this
hash. Methods of this class allow to find(), find_or_create() or
remove() MDL_lock objects in concurrency-friendly fashion (i.e.
for most common operation, find_or_create(), we don't acquire
MDL_lock::m_mutex while holding MDL_map::m_mutex. Thanks to MikaelR
for this idea and benchmarks!). Added three auxiliary members to
MDL_lock class (m_is_destroyed, m_ref_usage, m_ref_release) to
support this concurrency-friendly behavior.
- Introduced MDL_context::m_ctx_wakeup_cond condition variable to be
used for waiting until this context's pending request can be
satisfied or its thread has to perform actions to resolve potential
deadlock. Context which want to wait add ticket corresponding to the
request to an appropriate queue of waiters in MDL_lock object so
they can be noticed when other contexts change state of lock and be
awaken by them by signalling on MDL_context::m_ctx_wakeup_cond.
As consequence MDL_ticket objects has to be used for any waiting
in metadata locking subsystem including one which happens in
MDL_context::wait_for_locks() method.
Another consequence is that MDL_context is no longer copyable and
can't be saved/restored when working with system tables.
- Made MDL_lock an abstract class, which delegates specifying exact
compatibility matrix to its descendants. Added MDL_global_lock child
class for global lock (The old is_lock_type_compatible() method
became can_grant_lock() method of this class). Added MDL_object_lock
class to represent per-object lock (The old MDL_lock::can_grant_lock()
became its method). Choice between two classes happens based on MDL
namespace in MDL_lock::create() method.
- Got rid of MDL_lock::type member as its meaning became ambigous for
global locks.
- To simplify waking up of contexts waiting for lock split waiting queue
in MDL_lock class in two queues. One for pending requests for exclusive
(including intention exclusive) locks and another for requests for
shared locks.
- Added virtual wake_up_waiters() method to MDL_lock, MDL_global_lock and
MDL_object_lock classes which allows to wake up waiting contexts after
state of lock changes. Replaced old duplicated code with calls to this
method.
- Adjusted MDL_context::try_acquire_shared_lock()/exclusive_lock()/
global_shared_lock(), MDL_ticket::upgrade_shared_lock_to_exclusive_lock()
and MDL_context::release_ticket() methods to use MDL_map and
MDL_lock::m_mutex instead of single LOCK_mdl mutex and wake up
waiters according to the approach described above. The latter method
also was renamed to MDL_context::release_lock().
- Changed MDL_context::try_acquire_shared_lock()/exclusive_lock() and
release_lock() not to handle global locks. They are now supposed to
be taken explicitly like ordinary metadata locks.
- Added helper MDL_context::try_acquire_global_intention_exclusive_lock()
and acquire_global_intention_exclusive_lock() methods.
- Moved common code from MDL_context::acquire_global_shared_lock() and
acquire_global_intention_exclusive_lock() to new method -
MDL_context::acquire_lock_impl().
- Moved common code from MDL_context::try_acquire_shared_lock(),
try_acquire_global_intention_exclusive_lock()/exclusive_lock()
to MDL_context::try_acquire_lock_impl().
- Since acquiring of several exclusive locks can no longer happen under
single LOCK_mdl mutex the approach to it had to be changed. Now we do
it in one by one fashion. This is done in alphabetical order to avoid
deadlocks. Changed MDL_context::acquire_exclusive_locks() accordingly
(as part of this change moved code responsible for acquiring single
exclusive lock to new MDL_context::acquire_exclusive_lock_impl()
method).
- Since we no longer have single LOCK_mdl mutex which protects all
MDL_context::m_is_waiting_in_mdl members using these members to
determine if we have really awaken context holding conflicting
shared lock became inconvinient. Got rid of this member and changed
notify_shared_lock() helper function and process of acquiring
of/upgrading to exclusive lock not to rely on such information.
Now in MDL_context::acquire_exclusive_lock_impl() and
MDL_ticket::upgrade_shared_lock_to_exclusive_lock() we simply
re-try to wake up threads holding conflicting shared locks after
small time out.
- Adjusted MDL_context::can_wait_lead_to_deadlock() and
MDL_ticket::has_pending_conflicting_lock() to use per-lock
mutexes instead of LOCK_mdl. To do this introduced
MDL_lock::has_pending_exclusive_lock() method.
sql/mdl.h:
Changed metadata locking subsystem to use mutex per lock and condition
variable per context instead of one mutex and one conditional variable
for the whole subsystem. In order to implement this change:
- Added MDL_key::cmp() method to be able to sort MDL_key objects
alphabetically. Changed length fields in MDL_key class to uint16
as 16-bit is enough for length of any key.
- Changed MDL_ticket::get_ctx() to return pointer to non-const
object in order to be able to use MDL_context::awake() method
for such contexts.
- Got rid of unlocked versions of can_wait_lead_to_deadlock()/
has_pending_conflicting_lock() methods in MDL_context and
MDL_ticket. We no longer has single mutex which protects all
locks. Thus one always has to use versions of these methods
which acquire per-lock mutexes.
- MDL_request_list type of list now counts its elements.
- Added MDL_context::m_ctx_wakeup_cond condition variable to be used
for waiting until this context's pending request can be satisfied
or its thread has to perform actions to resolve potential deadlock.
Added awake() method to wake up context from such wait.
Addition of condition variable made MDL_context uncopyable.
As result we no longer can save/restore MDL_context when working
with system tables. Instead we create MDL savepoint before opening
those tables and rollback to it once they are closed.
- MDL_context::release_ticket() became release_lock() method.
- Added auxiliary MDL_context::acquire_exclusive_lock_impl() method
which does all necessary work to acquire exclusive lock on one object
but should not be used directly as it does not enforce any asserts
ensuring that no deadlocks are possible.
- Since we no longer need to know if thread trying to acquire exclusive
lock managed to wake up any threads having conflicting shared locks
(as, anyway, we will try to wake up such threads again shortly)
- MDL_context::m_is_waiting_in_mdl member became unnecessary and
notify_shared_lock() no longer needs to be friend of MDL_context.
Changed approach to handling of global metadata locks. Instead of
implicitly acquiring intention exclusive locks when user requests
per-object upgradeable or exclusive locks now we require them to be
acquired explicitly in the same way as ordinary metadata locks.
- Added new GLOBAL namespace for such locks.
- Added new type of lock to be requested MDL_INTENTION_EXCLISIVE.
- Added MDL_context::try_acquire_global_intention_exclusive_lock()
and acquire_global_intention_exclusive_lock() methods.
- Moved common code from MDL_context::acquire_global_shared_lock()
and acquire_global_intention_exclusive_lock() to new method -
MDL_context::acquire_lock_impl().
- Moved common code from MDL_context::try_acquire_shared_lock(),
try_acquire_global_intention_exclusive_lock()/exclusive_lock()
to MDL_context::try_acquire_lock_impl().
- Added helper MDL_context::is_global_lock_owner() method to be
able easily to find what kind of global lock this context holds.
- MDL_context::m_has_global_shared_lock became unnecessary as
global read lock is now represented by ordinary ticket.
- Removed assert in MDL_context::set_lt_or_ha_sentinel() which became
false for cases when we execute LOCK TABLES under global read lock
mode.
sql/mysql_priv.h:
Instead of using separate MDL_context for opening system tables we now
create MDL savepoint in the main context before opening such tables
and rollback to this savepoint after closing them. To support this
change methods of THD responsible for saving/restoring open table
state were changed to use Open_tables_backup class which in addition
to Open_table_state has a member for this savepoint. As result calls
opening/closing system tables were changed to use Open_tables_backup
instead of Open_table_state class as well.
sql/sp.cc:
Instead of using separate MDL_context for opening system tables we now
create MDL savepoint in the main context before opening such tables
and rollback to this savepoint after closing them. To support this
change methods of THD responsible for saving/restoring open table
state were changed to use Open_tables_backup class which in addition
to Open_table_state has a member for this savepoint. As result code
opening/closing system tables was changed to use Open_tables_backup
instead of Open_table_state class as well.
sql/sp.h:
Instead of using separate MDL_context for opening system tables we now
create MDL savepoint in the main context before opening such tables
and rollback to this savepoint after closing them. To support this
change methods of THD responsible for saving/restoring open table
state were changed to use Open_tables_backup class which in addition
to Open_table_state has a member for this savepoint. As result code
opening/closing system tables was changed to use Open_tables_backup
instead of Open_table_state class as well.
sql/sql_base.cc:
close_thread_tables():
Since we no longer use separate MDL_context for opening system
tables we need to avoid releasing all transaction locks when
closing system table. Releasing metadata lock on system table
is now responsibility of THD::restore_backup_open_tables_state().
open_table_get_mdl_lock(),
Open_table_context::recover_from_failed_open():
MDL subsystem no longer implicitly acquires global intention exclusive
metadata lock when per-object upgradable or exclusive metadata lock is
acquired. So this have to be done explicitly from these calls.
Changed Open_table_context class to store MDL_request object for
global intention exclusive lock acquired when opening tables.
open_table():
Do not release metadata lock if we have failed to open table as
this lock might have been acquired by one of previous statements
in transaction, and therefore should not be released.
open_system_tables_for_read()/close_system_tables()/
open_performance_schema_table():
Instead of using separate MDL_context for opening system tables we now
create MDL savepoint in the main context before opening such tables
and rollback to this savepoint after closing them. To support this
change methods of THD responsible for saving/restoring open table
state were changed to use Open_tables_backup class which in addition
to Open_table_state has a member for this savepoint. As result code
opening/closing system tables was changed to use Open_tables_backup
instead of Open_table_state class as well.
close_performance_schema_table():
Got rid of duplicated code.
sql/sql_class.cc:
Instead of using separate MDL_context for opening system tables we now
create MDL savepoint in the main context before opening such tables
and rollback to this savepoint after closing them. To support this
change methods of THD responsible for saving/restoring open table
state were changed to use Open_tables_backup class which in addition
to Open_table_state has a member for this savepoint. Also releasing
metadata lock on system table is now responsibility of
THD::restore_backup_open_tables_state().
Adjusted assert in THD::cleanup() to take into account fact that now
we also use MDL sentinel for global read lock.
sql/sql_class.h:
Instead of using separate MDL_context for opening system tables we now
create MDL savepoint in the main context before opening such tables
and rollback to this savepoint after closing them. As result:
- 'mdl_context' member was moved out of Open_tables_state to THD class.
enter_locked_tables_mode()/leave_locked_tables_mode() had to follow.
- Methods of THD responsible for saving/restoring open table state were
changed to use Open_tables_backup class which in addition to
Open_table_state has a member for this savepoint.
Changed Open_table_context class to store MDL_request object for
global intention exclusive lock acquired when opening tables.
sql/sql_delete.cc:
MDL subsystem no longer implicitly acquires global intention exclusive
metadata lock when per-object exclusive metadata lock is acquired.
Now this has to be done by explicit calls outside of MDL subsystem.
sql/sql_help.cc:
Instead of using separate MDL_context for opening system tables we now
create MDL savepoint in the main context before opening such tables
and rollback to this savepoint after closing them. To support this
change methods of THD responsible for saving/restoring open table
state were changed to use Open_tables_backup class which in addition
to Open_table_state has a member for this savepoint. As result code
opening/closing system tables was changed to use Open_tables_backup
instead of Open_table_state class as well.
sql/sql_parse.cc:
Adjusted assert reload_acl_and_cache() to the fact that global read
lock now takes full-blown metadata lock.
sql/sql_plist.h:
Added support for element counting to I_P_List list template.
One can use policy classes to specify if such counting is needed
or not needed for particular list.
sql/sql_show.cc:
Instead of using separate MDL_context for opening tables for I_S
purposes we now create MDL savepoint in the main context before
opening tables and rollback to this savepoint after closing them.
To support this and similar change for system tables methods of
THD responsible for saving/restoring open table state were changed
to use Open_tables_backup class which in addition to Open_table_state
has a member for this savepoint. As result code opening/closing tables
for I_S purposes was changed to use Open_tables_backup instead of
Open_table_state class as well.
sql/sql_table.cc:
mysql_rm_tables_part2():
Since now global intention exclusive metadata lock is ordinary
metadata lock we no longer can rely that by releasing MDL locks
on all tables we will release all locks acquired by this routine.
So in non-LOCK-TABLES mode we have to release all locks acquired
explicitly.
prepare_for_repair(), mysql_alter_table():
MDL subsystem no longer implicitly acquires global intention
exclusive metadata lock when per-object exclusive metadata lock
is acquired. Now this has to be done by explicit calls outside of
MDL subsystem.
sql/tztime.cc:
Instead of using separate MDL_context for opening system tables we now
create MDL savepoint in the main context before opening such tables
and rollback to this savepoint after closing them. To support this
change methods of THD responsible for saving/restoring open table
state were changed to use Open_tables_backup class which in addition
to Open_table_state has a member for this savepoint. As result code
opening/closing system tables was changed to use Open_tables_backup
instead of Open_table_state class as well.
Also changed code not to use special mechanism for open system tables
when it is not really necessary.
It is well-known that due to concurrency issues, a slave can become
inconsistent when a transaction contains updates to both transaction and
non-transactional tables in statement and mixed modes.
In a nutshell, the current code-base tries to preserve causality among the
statements by writing non-transactional statements to the txn-cache which
is flushed upon commit. However, modifications done to non-transactional
tables on behalf of a transaction become immediately visible to other
connections but may not immediately get into the binary log and therefore
consistency may be broken.
In general, it is impossible to automatically detect causality/dependency
among statements by just analyzing the statements sent to the server. This
happen because dependency may be hidden in the application code and it is
necessary to know a priori all the statements processed in the context of
a transaction such as in a procedure. Moreover, even for the few cases that
we could automatically address in the server, the computation effort
required could make the approach infeasible.
So, in this patch we introduce the option
- "--binlog-direct-non-transactional-updates" that can be used to bypass
the current behavior in order to write directly to binary log statements
that change non-transactional tables.
mysql-test/extra/rpl_tests/rpl_mixing_engines.inc:
Backported this from Celosia to improve the test cases related to the NTM issue.
sql/log.cc:
Checks the --binlog-direct-non-transactional-updates before choosing
to either use the trxn-cache or not.
sql/mysqld.cc:
Introduces the option --binlog-direct-non-transactional-updates.
sql/set_var.cc:
Introduces the option --binlog-direct-non-transactional-updates.
sql/sql_class.h:
Introduces the option --binlog-direct-non-transactional-updates.
variable
The User_var_log_event was not serializing the unsigned
flag. This would cause the slave to always assume signed values.
We fix this by extending the User_var_log_event to also contain
information on the unsigned_flag, meaning that it gets into the
binlog as well, therefore the slave will get this information as
well. Events without information on unsigned flag (old events)
are treated as they were before (always signed: unsigned_flag=
FALSE).
The information on the unsigned_flag, is shipped in an extra byte
appended to the end of the User_var_log_event and added by this
patch. This extra byte holds values for general purpose
User_var_log_event flags which are now packed in the binlog as
well. One of these flags contains information about whether the
value is signed or unsigned (currently this extra byte is only
used to hold data on the unsigned flag, in the future we can use
it to pack extra flags if there is the need to).
- Marked a couple of tests with --big
- Fixed xtradb/handler/ha_innodb.cc to call explain_filename()
storage/xtradb/handler/ha_innodb.cc:
Call explain_filename() to get proper names for partitioned tables
Conflicts:
Text conflict in .bzr-mysql/default.conf
Text conflict in mysql-test/extra/rpl_tests/rpl_loaddata.test
Text conflict in mysql-test/r/mysqlbinlog2.result
Text conflict in mysql-test/suite/binlog/r/binlog_stm_mix_innodb_myisam.result
Text conflict in mysql-test/suite/binlog/r/binlog_unsafe.result
Text conflict in mysql-test/suite/rpl/r/rpl_insert_id.result
Text conflict in mysql-test/suite/rpl/r/rpl_loaddata.result
Text conflict in mysql-test/suite/rpl/r/rpl_stm_auto_increment_bug33029.result
Text conflict in mysql-test/suite/rpl/r/rpl_udf.result
Text conflict in mysql-test/suite/rpl/t/rpl_slow_query_log.test
Text conflict in sql/field.h
Text conflict in sql/log.cc
Text conflict in sql/log_event.cc
Text conflict in sql/log_event_old.cc
Text conflict in sql/mysql_priv.h
Text conflict in sql/share/errmsg.txt
Text conflict in sql/sp.cc
Text conflict in sql/sql_acl.cc
Text conflict in sql/sql_base.cc
Text conflict in sql/sql_class.h
Text conflict in sql/sql_db.cc
Text conflict in sql/sql_delete.cc
Text conflict in sql/sql_insert.cc
Text conflict in sql/sql_lex.cc
Text conflict in sql/sql_lex.h
Text conflict in sql/sql_load.cc
Text conflict in sql/sql_table.cc
Text conflict in sql/sql_update.cc
Text conflict in sql/sql_view.cc
Conflict adding files to storage/innobase. Created directory.
Conflict because storage/innobase is not versioned, but has versioned children. Versioned directory.
Conflict adding file storage/innobase. Moved existing file to storage/innobase.moved.
Conflict adding files to storage/innobase/handler. Created directory.
Conflict because storage/innobase/handler is not versioned, but has versioned children. Versioned directory.
Contents conflict in storage/innobase/handler/ha_innodb.cc
In auto-commit mode, updating both trx and non-trx tables (i.e. issuing a mixed
statement) causes the following sequence of events:
1 - "Flush trx changes" (MYSQL_BIN_LOG::write) - T1:
1.1 - mutex_lock (&LOCK_log)
1.2 - mutex_lock (&LOCK_prep_xids)
1.3 - increase prepared_xids
1.4 - mutex_unlock (&LOCK_prep_xids)
1.5 - mutex_unlock (&LOCK_log)
2 - "Flush non-trx changes" (MYSQL_BIN_LOG::write) - T1:
2.1 - mutex_lock (&LOCK_log)
2.2 - mutex_unlock (&LOCK_log)
3. "unlog" - T1
3.1 - mutex_lock (&LOCK_prep_xids)
3.2 - decrease prepared xids
3.3 - pthread_cond_signal(&COND_prep_xids);
3.4 - mutex_unlock (&LOCK_prep_xids)
The "FLUSH logs" command produces the following sequence of events:
1 - "FLUSH logs" command (MYSQL_BIN_LOG::new_file_impl) - user thread:
1.1 - mutex_lock (&LOCK_log)
1.2 - mutex_lock (&LOCK_prep_xids)
1.3 - while (prepared_xids) pthread_cond_wait(..., &LOCK_prep_xids);
1.4 - mutex_unlock (&LOCK_prep_xids)
1.5 - mutex_unlock (&LOCK_log)
A deadlock will arise if T1 flushes the trx changes and thus increases
prepared_xids but before it is able to continue the execution and flush the
non-trx changes, an user thread calls the "FLUSH logs" command and wait that
the prepared_xids is decreased and gets to zero. However, T1 cannot proceed
with the call to "Flush non-trx changes" because it will block in the mutex
"LOCK_log" and by consequence cannot complete the execution and call the
unlog to decrease the prepared_xids.
To fix the problem, we ensure that the non-trx changes are always flushed
before the trx changes.
Note that if you call "Flush non-trx changes" and a concurrent "FLUSH logs" is
issued, the "Flush non-trx changes" may block, but a deadlock will never happen
because the prepared_xids will eventually get to zero. Bottom line, there will
not be any transaction able to increase the prepared_xids because they will
block in the mutex "LOCK_log" (MYSQL_BIN_LOG::write) and those that increased
the prepared_xids will eventually commit and decrease the prepared_xids.
Conflicts:
Conflict adding files to server-tools. Created directory.
Conflict because server-tools is not versioned, but has versioned children. Versioned directory.
Conflict adding files to server-tools/instance-manager. Created directory.
Conflict because server-tools/instance-manager is not versioned, but has versioned children. Versioned directory.
Contents conflict in server-tools/instance-manager/instance_map.cc
Contents conflict in server-tools/instance-manager/listener.cc
Contents conflict in server-tools/instance-manager/options.cc
Contents conflict in server-tools/instance-manager/user_map.cc
Bug#16565 mysqld --help --verbose does not order variablesBug#20413 sql_slave_skip_counter is not shown in show variables
Bug#20415 Output of mysqld --help --verbose is incomplete
Bug#25430 variable not found in SELECT @@global.ft_max_word_len;
Bug#32902 plugin variables don't know their names
Bug#34599 MySQLD Option and Variable Reference need to be consistent in formatting!
Bug#34829 No default value for variable and setting default does not raise error
Bug#34834 ? Is accepted as a valid sql mode
Bug#34878 Few variables have default value according to documentation but error occurs
Bug#34883 ft_boolean_syntax cant be assigned from user variable to global var.
Bug#37187 `INFORMATION_SCHEMA`.`GLOBAL_VARIABLES`: inconsistent status
Bug#40988 log_output_basic.test succeeded though syntactically false.
Bug#41010 enum-style command-line options are not honoured (maria.maria-recover fails)
Bug#42103 Setting key_buffer_size to a negative value may lead to very large allocations
Bug#44691 Some plugins configured as MYSQL_PLUGIN_MANDATORY in can be disabled
Bug#44797 plugins w/o command-line options have no disabling option in --help
Bug#46314 string system variables don't support expressions
Bug#46470 sys_vars.max_binlog_cache_size_basic_32 is broken
Bug#46586 When using the plugin interface the type "set" for options caused a crash.
Bug#47212 Crash in DBUG_PRINT in mysqltest.cc when trying to print octal number
Bug#48758 mysqltest crashes on sys_vars.collation_server_basic in gcov builds
Bug#49417 some complaints about mysqld --help --verbose output
Bug#49540 DEFAULT value of binlog_format isn't the default value
Bug#49640 ambiguous option '--skip-skip-myisam' (double skip prefix)
Bug#49644 init_connect and \0
Bug#49645 init_slave and multi-byte characters
Bug#49646 mysql --show-warnings crashes when server dies
CMakeLists.txt:
Bug#44691 Some plugins configured as MYSQL_PLUGIN_MANDATORY in can be disabled
client/mysql.cc:
don't crash with --show-warnings when mysqld dies
config/ac-macros/plugins.m4:
Bug#44691 Some plugins configured as MYSQL_PLUGIN_MANDATORY in can be disabled
include/my_getopt.h:
comments
include/my_pthread.h:
fix double #define
mysql-test/mysql-test-run.pl:
run sys_vars suite by default
properly recognize envirinment variables (e.g. MTR_MAX_SAVE_CORE) set to 0
escape gdb command line arguments
mysql-test/suite/sys_vars/r/rpl_init_slave_func.result:
init_slave+utf8 bug
mysql-test/suite/sys_vars/t/rpl_init_slave_func.test:
init_slave+utf8 bug
mysys/my_getopt.c:
Bug#34599 MySQLD Option and Variable Reference need to be consistent in formatting!
Bug#46586 When using the plugin interface the type "set" for options caused a crash.
Bug#49640 ambiguous option '--skip-skip-myisam' (double skip prefix)
mysys/typelib.c:
support for flagset
sql/ha_ndbcluster.cc:
backport from telco tree
sql/item_func.cc:
Bug#49644 init_connect and \0
Bug#49645 init_slave and multi-byte characters
sql/sql_builtin.cc.in:
Bug#44691 Some plugins configured as MYSQL_PLUGIN_MANDATORY in can be disabled
sql/sql_plugin.cc:
Bug#44691 Some plugins configured as MYSQL_PLUGIN_MANDATORY in can be disabled
Bug#32902 plugin variables don't know their names
Bug#44797 plugins w/o command-line options have no disabling option in --help
sql/sys_vars.cc:
all server variables are defined here
storage/myisam/ft_parser.c:
remove unnecessary updates of param->quot
storage/myisam/ha_myisam.cc:
myisam_* variables belong here
strings/my_vsnprintf.c:
%o and %llx
unittest/mysys/my_vsnprintf-t.c:
%o and %llx tests
vio/viosocket.c:
bugfix: fix @@wait_timeout to work with socket timeouts (vs. alarm thread)
The problem is a somewhat common misusage of the strmake function.
The strmake(dst, src, len) function writes at most /len/ bytes to
the string pointed to by src, not including the trailing null byte.
Hence, if /len/ is the exact length of the destination buffer, a
one byte buffer overflow can occur if the length of the source
string is equal to or greater than /len/.
client/mysqldump.c:
Make room for the trailing null byte.
libmysql/libmysql.c:
Add comment, there is enough room in the buffer.
Increase buffer length, two strings are concatenated.
libmysqld/lib_sql.cc:
Make room for the trailing null byte.
mysys/default.c:
Make room for the trailing null bytes.
mysys/mf_pack.c:
Make room for the trailing null byte.
server-tools/instance-manager/commands.cc:
Copy only if overflow isn't possible in both cases.
server-tools/instance-manager/listener.cc:
Make room for the trailing null byte.
sql/log.cc:
Make room for the trailing null byte.
sql/sp_pcontext.h:
Cosmetic fix.
sql/sql_acl.cc:
MAX_HOSTNAME already specifies space for the trailing null byte.
sql/sql_parse.cc:
Make room for the trailing null byte.
sql/sql_table.cc:
Make room for the trailing null byte.
Bug #36098 Audit plugin (wl 3771) feature disabled in 6.0
avoid recusrive locking of LOCK_plugin
include/mysql/plugin_audit.h:
fix incorrect version
sql/log.cc:
move the common code to a shared header
sql/mysqld.cc:
restore the deleted functionality
sql/set_var.cc:
remove unused parameter
sql/sql_audit.h:
two inline convenience functions
sql/sql_parse.cc:
use a simplified convenience call
sql/sql_plugin.cc:
unlock LOCK_plugin for plugin->init() call, add missing OOM check,
issue "unknown variable" error in find_sys_var, not down the stack
WL#3771
"Audit Plugin Interface"
Implement new plug-in type - AUDIT
New plug-in: audit_null
simply increments counter for how many times it was called.
include/Makefile.am:
wl3771
add new headers to distribution
include/mysql/plugin.h:
wl3771
define new AUDIT plugin type
Split out fulltext plugin type into its own header
include/mysql/plugin.h.pp:
wl3771
no real API change, just re-arranged some code
include/mysql/plugin_audit.h:
wl3771
pluggable audit interface
include/mysql/plugin_ftparser.h:
wl3771
Split out fulltext plugin type into its own header
libmysqld/CMakeLists.txt:
wl3771
add sql_audit.cc to build
libmysqld/Makefile.am:
wl3771
add sql_audit.cc to build
plugin/audit_null:
wl3771
an example plugin for testing pluggable audit interface
plugin/audit_null/Makefile.am:
wl3771
an example plugin for testing pluggable audit interface
plugin/audit_null/audit_null.c:
wl3771
an example plugin for testing pluggable audit interface
plugin/audit_null/plug.in:
wl3771
an example plugin for testing pluggable audit interface
sql/CMakeLists.txt:
wl3771
add sql_audit.cc to build
sql/Makefile.am:
wl3771
add sql_audit.cc to build
sql/event_queue.cc:
wl3771
release audit resources before waiting
sql/log.cc:
wl3771
add general audit call for log
sql/mysqld.cc:
wl3771
add audit initialize/finalize
add general audit call for error
sql/sql_audit.cc:
wl3771
pluggable audit interface implementation
sql/sql_audit.h:
wl3771
pluggable audit interface implementation
sql/sql_class.cc:
wl3771
add thd audit init/deinit calls
sql/sql_class.h:
wl3771
add required data structures for audit to THD
sql/sql_connect.cc:
wl3771
release audit resources before waiting
sql/sql_insert.cc:
wl3771
release audit plugins before waiting
sql/sql_parse.cc:
wl3771
add general audit call for results
sql/sql_plugin.cc:
wl3771
add declarations for audit plugin type
for InnoDB
The class Field_bit_as_char stores the metadata for the
field incorrecly because bytes_in_rec and bit_len are set
to (field_length + 7 ) / 8 and 0 respectively, while
Field_bit has the correct values field_length / 8 and
field_length % 8.
Solved the problem by re-computing the values for the
metadata based on the field_length instead of using the
bytes_in_rec and bit_len variables.
To handle compatibility with old server, a table map
flag was added to indicate that the bit computation is
exact. If the flag is clear, the slave computes the
number of bytes required to store the bit field and
compares that instead, effectively allowing replication
*without conversion* from any field length that require
the same number of bytes to store.
mysql-test/suite/rpl/t/rpl_typeconv_innodb.test:
Adding test to check compatibility for bit field
replication when using InnoDB.
sql/field.cc:
Extending compatible_field_size() with flags from
table map to allow fields to check master info.
sql/field.h:
Extending compatible_field_size() with flags from
table map to allow fields to check master info.
sql/log.cc:
Removing table map flags since they are not used
outside table map class.
sql/log_event.cc:
Removing flags parameter from table map constructor
since it is not used and does not have to be exposed.
sql/log_event.h:
Adding flag to denote that bit length for bit field type
is exact and not potentially rounded to even bytes.
sql/rpl_utility.cc:
Adding fields to table_def to store table map flags.
sql/rpl_utility.h:
Removing obsolete comment and adding flags to store
table map flags from master.
Problem is that purge_logs implementation in ndb (ndbcluster_binlog_index_purge_file)
calls mysql_parse (with (thd->options & OPTION_BIN_LOG) === 0))
but MYSQL_BIN_LOG first takes LOCK_log and then checks thd->options
Solution in this patch, changes so that rotate_and_purge does not hold
LOCK_log when calling purge_logs_before_date. I think this is safe
as other "purge"-function(s) is called wo/ holding LOCK_log, e.g purge_master_logs
----------------------------------------------------------
revno: 2617.69.20
committer: Konstantin Osipov <kostja@sun.com>
branch nick: 5.4-4284-1-assert
timestamp: Thu 2009-08-13 18:29:55 +0400
message:
WL#4284 "Transactional DDL locking"
A review fix.
Since WL#4284 implementation separated MDL_request and MDL_ticket,
MDL_request becamse a utility object necessary only to get a ticket.
Store it by-value in TABLE_LIST with the intent to merge
MDL_request::key with table_list->table_name and table_list->db
in future.
Change the MDL subsystem to not require MDL_requests to
stay around till close_thread_tables().
Remove the list of requests from the MDL context.
Requests for shared metadata locks acquired in open_tables()
are only used as a list in recover_from_failed_open_table_attempt(),
which calls mdl_context.wait_for_locks() for this list.
To keep such list for recover_from_failed_open_table_attempt(),
introduce a context class (Open_table_context), that collects
all requests.
A lot of minor cleanups and simplications that became possible
with this change.
sql/event_db_repository.cc:
Remove alloc_mdl_requests(). Now MDL_request instance is a member
of TABLE_LIST, and init_one_table() initializes it.
sql/ha_ndbcluster_binlog.cc:
Remove now unnecessary declaration and initialization
of binlog_mdl_request.
sql/lock.cc:
No need to allocate MDL requests in lock_table_names() now.
sql/log.cc:
Use init_one_table() method, remove alloc_mdl_requests(),
which is now unnecessary.
sql/log_event.cc:
No need to allocate mdl_request separately now.
Use init_one_table() method.
sql/log_event_old.cc:
Update to the new signature of close_tables_for_reopen().
sql/mdl.cc:
Update try_acquire_exclusive_lock() to be more easy to use.
Function lock_table_name_if_not_cached() has been removed.
Make acquire_shared_lock() signature consistent with
try_acquire_exclusive_lock() signature.
Remove methods that are no longer used.
Update comments.
sql/mdl.h:
Implement an assignment operator that doesn't
copy MDL_key (MDL_key::operator= is private and
should remain private).
This is a hack to work-around assignment of TABLE_LIST
by value in several places. Such assignments violate
encapsulation, since only perform a shallow copy.
In most cases these assignments are a hack on their own.
sql/mysql_priv.h:
Update signatures of close_thread_tables() and close_tables_for_reopen().
sql/sp.cc:
Allocate TABLE_LIST in thd->mem_root.
Use init_one_table().
sql/sp_head.cc:
Use init_one_table().
Remove thd->locked_tables_root, it's no longer needed.
sql/sql_acl.cc:
Use init_mdl_requests() and init_one_table().
sql/sql_base.cc:
Update to new signatures of try_acquire_shared_lock() and
try_acquire_exclusive_lock().
Remove lock_table_name_if_not_cached().
Fix a bug in open_ltable() that would not return ER_LOCK_DEADLOCK
in case of a failed lock_tables() and a multi-statement
transaction.
Fix a bug in open_and_lock_tables_derived() that would
not return ER_LOCK_DEADLOCK in case of a multi-statement
transaction and a failure of lock_tables().
Move assignment of enum_open_table_action to a method of Open_table_context, a new class that maintains information
for backoff actions.
Minor rearrangements of the code.
Remove alloc_mdl_requests() in functions that work with system
tables: instead the patch ensures that callers always initialize
TABLE_LIST argument.
sql/sql_class.cc:
THD::locked_tables_root is no more.
sql/sql_class.h:
THD::locked_tables_root is no more.
Add a declaration for Open_table_context class.
sql/sql_delete.cc:
Update to use the simplified MDL API.
sql/sql_handler.cc:
TABLE_LIST::mdl_request is stored by-value now.
Ensure that mdl_request.ticket is NULL for every request
that is passed into MDL, to satisfy MDL asserts.
@ sql/sql_help.cc
Function open_system_tables_for_read() no longer initializes
mdl_requests.
Move TABLE_LIST::mdl_request initialization closer to
TABLE_LIST initialization.
sql/sql_help.cc:
Function open_system_tables_for_read() no longer initializes
mdl_requests.
Move TABLE_LIST::mdl_request initialization closer to
TABLE_LIST initialization.
sql/sql_insert.cc:
Remove assignment by-value of TABLE_LIST in
TABLEOP_HOOKS. We can't carry over a granted
MDL ticket from one table list to another.
sql/sql_parse.cc:
Change alloc_mdl_requests() -> init_mdl_requests().
@todo We can remove init_mdl_requests() altogether
in some places: all places that call add_table_to_list()
already have mdl requests initialized.
sql/sql_plugin.cc:
Use init_one_table().
THD::locked_tables_root is no more.
sql/sql_servers.cc:
Use init_one_table().
sql/sql_show.cc:
Update acquire_high_priority_shared_lock() to use
TABLE_LIST::mdl_request rather than allocate an own.
Fix get_trigger_table_impl() to use init_one_table(),
check for out of memory, follow the coding style.
sql/sql_table.cc:
Update to work with TABLE_LIST::mdl_request by-value.
Remove lock_table_name_if_not_cached().
The code that used to delegate to it is quite simple and
concise without it now.
sql/sql_udf.cc:
Use init_one_table().
sql/sql_update.cc:
Update to use the new signature of close_tables_for_reopen().
sql/table.cc:
Move re-setting of mdl_requests for prepared statements
and stored procedures from close_thread_tables() to
reinit_stmt_before_use().
Change alloc_mdl_requests() to init_mdl_requests().
init_mdl_requests() is a hack that can't be deleted
until we don't have a list-aware TABLE_LIST constructor.
Hopefully its use will be minimal
sql/table.h:
Change alloc_mdl_requests() to init_mdl_requests()
TABLE_LIST::mdl_request is stored by value.
sql/tztime.cc:
We no longer initialize mdl requests in open_system_tables_for*()
functions. Move this initialization closer to initialization
of the rest of TABLE_LIST members.
storage/myisammrg/ha_myisammrg.cc:
Simplify mdl_request initialization.
This patch fixes three bugs as follows. First, aborting the server while purging
binary logs might generate orphan files due to how the purge operation was
implemented:
(purge routine - sql/log.cc - MYSQL_BIN_LOG::purge_logs)
1 - register the files to be removed in a temporary buffer.
2 - update the log-bin.index.
3 - flush the log-bin.index.
4 - erase the files whose names where register in the temporary buffer
in step 1.
Thus a failure while executing step 4 would generate an orphan file. Second,
a similar issue might happen while creating a new binary as follows:
(create routine - sql/log.cc - MYSQL_BIN_LOG::open)
1 - open the new log-bin.
2 - update the log-bin.index.
Thus a failure while executing step 1 would generate an orphan file.
To fix these issues, we record the files to be purged or created before really
removing or adding them. So if a failure happens such records can be used to
automatically remove dangling files. The new steps might be outlined as follows:
(purge routine - sql/log.cc - MYSQL_BIN_LOG::purge_logs)
1 - register the files to be removed in the log-bin.~rec~ placed in
the data directory.
2 - update the log-bin.index.
3 - flush the log-bin.index.
4 - delete the log-bin.~rec~.
(create routine - sql/log.cc - MYSQL_BIN_LOG::open)
1 - register the file to be created in the log-bin.~rec~
placed in the data directory.
2 - open the new log-bin.
3 - update the log-bin.index.
4 - delete the log-bin.~rec~.
(recovery routine - sql/log.cc - MYSQL_BIN_LOG::open_index_file)
1 - open the log-bin.index.
2 - open the log-bin.~rec~.
3 - for each file in log-bin.~rec~.
3.1 Check if the file is in the log-bin.index and if so ignore it.
3.2 Otherwise, delete it.
The third issue can be described as follows. The purge operation was allowing
to remove a file in use thus leading to the loss of data and possible
inconsistencies between the master and slave. Roughly, the routine was only
taking into account the dump threads and so if a slave was not connect the
file might be delete even though it was in use.
revno: 2617.22.4
committer: Davi Arnaut <Davi.Arnaut@Sun.COM>
branch nick: mysql-6.0-runtime
timestamp: Mon 2009-01-26 15:19:14 -0200
message:
Move checks for OPTION_NOT_AUTOCOMMIT | OPTION_BEGIN to a separate
helper function.
sql/ha_ndbcluster.cc:
Use helper method to check transaction mode.
sql/log.cc:
Use helper method to check transaction mode.
sql/sql_cache.cc:
Use helper method to check transaction mode.
sql/sql_class.cc:
Use helper method to check transaction mode.
sql/sql_class.h:
Add helper method to check whether session is in a multi-statement
transaction.
sql/sql_parse.cc:
Use helper method to check transaction mode.
sql/transaction.cc:
Use helper method to check transaction mode.
Support for flushing individual logs, so that the user can
selectively flush a subset of the server logs.
Flush of individual logs is done according to the
following syntax:
FLUSH <log_category> LOGS;
The syntax is extended so that the user is able to flush a
subset of logs:
FLUSH [log_category LOGS,];
where log_category is one of:
SLOW
ERROR
BINARY
ENGINE
GENERAL
RELAY.
mysql-test/suite/rpl/r/rpl_flush_logs.result:
Test result for WL#5142.
mysql-test/suite/rpl/t/rpl_flush_logs.test:
Added the test file to verify if the 'flush individual log'
statement works fine.
sql/log.cc:
Added the two functions to flush slow and general log.
sql/sql_parse.cc:
Added code to flush specified logs against the option.
sql/sql_yacc.yy:
Added code to parse the 'flush * log' statement syntax and
set its option to Lex->type.
Text conflict in mysql-test/collections/default.experimental
Text conflict in mysql-test/r/show_check.result
Text conflict in mysql-test/r/sp-code.result
Text conflict in mysql-test/suite/binlog/r/binlog_tmp_table.result
Text conflict in mysql-test/suite/rpl/t/disabled.def
Text conflict in mysql-test/t/show_check.test
Text conflict in mysys/my_delete.c
Text conflict in sql/item.h
Text conflict in sql/item_cmpfunc.h
Text conflict in sql/log.cc
Text conflict in sql/mysqld.cc
Text conflict in sql/repl_failsafe.cc
Text conflict in sql/slave.cc
Text conflict in sql/sql_parse.cc
Text conflict in sql/sql_table.cc
Text conflict in sql/sql_yacc.yy
Text conflict in storage/myisam/ha_myisam.cc
Corrected results for
stm_auto_increment_bug33029.reject 2009-12-01
20:01:49.000000000 +0300
<andrei> @@ -42,9 +42,6 @@
<andrei> RETURN i;
<andrei> END//
<andrei> CALL p1();
<andrei> -Warnings:
<andrei> -Note 1592 Statement may not be safe to log in statement
format.
<andrei> -Note 1592 Statement may not be safe to log in statement
format.
There should be indeed no Note present because there is in fact autoincrement
top-level query in sp() that triggers inserting in yet another auto-inc table.
(todo: alert DaoGang to improve the test).
----------------------------------------------------------
revno: 2630.4.26
committer: Konstantin Osipov <konstantin@mysql.com>
branch nick: mysql-6.0-prelocked_mode-to-push
timestamp: Fri 2008-06-06 23:19:04 +0400
message:
WL#3726: work on review comments.
Remove thd->locked_tables. Always store MYSQL_LOCK instances in
thd->lock.
Rename thd->prelocked_mode to thd->locked_tables_mode.
Use thd->locked_tables_mode to determine if we
are under LOCK TABLES. Update the code to not assume that
if thd->lock is set, LOCK TABLES mode is off.
Review comments.
sql/ha_ndbcluster_binlog.cc:
Don't unlock the lock under LOCK TABLES (safety).
sql/handler.cc:
There is no thd->locked_tables any more.
Update comments.
sql/lock.cc:
There is no thd->locked_tables any more.
sql/log.cc:
Rename thd->prelocked_mode to thd->locked_tables_mode.
sql/set_var.cc:
Use thd->locked_tables_mode to determine if we are under LOCK TABLES.
sql/sp_head.cc:
Rename thd->prelocked_mode to thd->locked_tables_mode.
sql/sql_base.cc:
Use thd->locked_tables_mode to determine if we are under LOCK TABLES.
Remove thd->locked_tables.
sql/sql_cache.cc:
Use thd->locked_tables_mode to determine if we are under LOCK TABLES.
sql/sql_class.cc:
Avoid code duplication.
Do not release the table locks prematurely if we're under LOCK TABLES.
Use thd->locked_tables_mode instead of thd->locked_tables.
sql/sql_class.h:
Remove thd->locked_tables.
Make prelocked mode a kind of LOCK TABLES mode.
Update comments.
sql/sql_cursor.cc:
Update comments.
sql/sql_insert.cc:
Use thd->locked_tables_mode to determine if we are under LOCK TABLES.
Rename thd->prelocked_mode to thd->locked_tables_mode.
sql/sql_load.cc:
Rename thd->prelocked_mode to thd->locked_tables_mode.
sql/sql_parse.cc:
Use thd->locked_tables_mode to determine if we are under LOCK TABLES.
Remove thd->locked_tables.
sql/sql_partition.cc:
Use thd->locked_tables_mode to determine if we are under LOCK TABLES.
sql/sql_rename.cc:
Use thd->locked_tables_mode to determine if we are under LOCK TABLES.
sql/sql_select.cc:
Use thd->locked_tables_mode to determine if we are under LOCK TABLES.
sql/sql_table.cc:
Use thd->locked_tables_mode to determine if we are under LOCK TABLES.
sql/sql_trigger.cc:
Use thd->locked_tables_mode to determine if we are under LOCK TABLES.
sql/sql_update.cc:
Use thd->locked_tables_mode to determine if we are under LOCK TABLES.
sql/sql_view.cc:
Use thd->locked_tables_mode to determine if we are under LOCK TABLES.
storage/myisam/ha_myisam.cc:
Use thd->locked_tables_mode to determine if we are under LOCK TABLES.
