commit '6de482a6fefac0c21daf33ed465644151cdf879f'
10.3 no longer errors in truncate_notembedded.test
but per comments, a non-crash is all that we are after.
whenever possible, partitioning should use the full
partition plugin name, not the one byte legacy code.
Normally, ha_partition can get the engine plugin from
table_share->default_part_plugin.
But in some cases, e.g. in DROP TABLE, the table isn't
opened, table_share is NULL, and ha_partition has to parse
the frm, much like dd_frm_type() does.
temporary_tables.cc, sql_table.cc:
When dropping a table, it must be deleted in the engine
first, then frm file. Because frm can be the only true
source of metadata that the engine might need for DROP.
table.cc:
when opening a partitioned table, if the engine for
partitions is not found, do not fallback to MyISAM.
not every index-using plan sets bits in table->quick_keys.
QUICK_ROR_INTERSECT_SELECT, for example, doesn't.
Use the fact that select->quick is set instead.
Also allow EXPLAIN to work.
Let us explicitly wait for purge before invoking a slow shutdown,
so that instrumented builds (such as ASAN or UBSAN) will not
exceed the 60-second timeout during shutdown.
The first step for deprecating innodb_autoinc_lock_mode(see MDEV-27844) is:
- to switch statement binlog format to ROW if binlog format is MIXED and
the statement changes autoincremented fields
- issue warnings if innodb_autoinc_lock_mode == 2 and binlog format is
STATEMENT
The warning out of OPTIMIZE
Statement is unsafe because it uses a system function
was indeed counterfactual and was resulted by checking an
insufficiently strict property of lex' sql_command_flags.
Fixed with deploying an additional checking of weather
the current sql command that modifes a share->non_determinstic_insert
table is capable of generating ROW format events.
The extra check rules out the unsafety to OPTIMIZE et al, while the
existing check continues to do so to CREATE TABLE (which is
perculiarly tagged as ROW-event generative sql command).
As a side effect sql_sequence.binlog test gets corrected and
binlog_stm_unsafe_warning.test is reinforced to add up
an unsafe CREATE..SELECT test.
Travis is dead to us so we don't need all the conditions around it.
Remove depends for no longer supported versions
Debian Jessies, and Ubuntu Trusty, Xenial, Wily are all eol
as far as we are concerned.
The dependancy on an apt cache when running autobake broke the
10.2 aarch64 packages (MDEV-28014). Lets reduce the risk here.
zstd-1.1.3 is needed however stretch has only 1.1.2.
Move to distro version based checks as checks against the
apt-cache are unreliable if there is no cache.
Fixed typo in my_malloc_size_cb_func. There is no max-thread-mem-used
sys variable in MariaDB, only max-session-mem-used. The relevant entry
in sys_vars.cc is also fixed.
Added a fallback case in case we could allocate the 256 bytes for the
error message containing the exact setting.
MDEV-27025 allows to insert records before the record on which DELETE is
locked, as a result the DELETE misses those records, what causes serious ACID
violation.
Revert MDEV-27025, MDEV-27550. The test which shows the scenario of ACID
violation is added.
The virtual member function handler::reset_auto_increment(ulonglong)
is only ever invoked by the default implementation of the virtual
member function handler::truncate().
Because ha_innobase::truncate() overrides handler::truncate() without
ever invoking handler::truncate(), some InnoDB member functions are
never called.
ha_innobase::innobase_reset_autoinc(), ha_innobase::reset_auto_increment():
Removed (unreachable code).
ha_innobase::delete_all_rows(): Removed. The default implementation
handler::delete_all_rows() works just as fine.
- InnoDB FTS DDL decrements the FTS_DOC_ID when there is a
deleted marked record involved. FTS_DOC_ID must never be
reused. The purpose of FTS_DOC_ID is to be a unique row
identifier that will be changed whenever a fulltext indexed
column is updated.
btr_cur_optimistic_insert(): Disregard DEBUG_DBUG injection to
invoke btr_page_reorganize() if the page (and the table) is empty.
Otherwise, an assertion would fail in btr_page_reorganize_low()
because PAGE_MAX_TRX_ID is 0 in an empty secondary index leaf page.
udf_handler::fix_fields(): Execute an assignment outside "if"
so that GCC 12 will not issue a bogus-looking warning.
Also, deduplicate some error handling code.
In commit c7d0448797 (MDEV-15132)
MariaDB Server 10.3 stopped writing the latest transaction identifier
to the TRX_SYS page. Instead, the transaction identifier will be
recovered from undo log pages.
Unfortunately, before commit 3926673ce7
and mysql/mysql-server@dc29792ff2
(MySQL 5.1.48 or MariaDB 5.1.48) InnoDB did not always initialize all
data fields, but some garbage could be left behind in unused parts
of data pages.
In undo log pages that are essentially free, but added to a list for
reuse (TRX_UNDO_CACHED) the TRX_UNDO_TRX_NO fields could contain garbage,
instead of 0. As long as such undo pages are being reused and never
marked completely free, the garbage contents may remain forever.
In fact, the function trx_undo_header_create() and the record
MLOG_UNDO_HDR_CREATE will only initialize TRX_UNDO_TRX_ID, but leave
TRX_UNDO_TRX_NO uninitialized.
trx_undo_mem_create_at_db_start(): Only read the TRX_UNDO_TRX_NO
fields of TRX_UNDO_CACHED pages if the TRX_UNDO_PAGE_TYPE is 0,
that is, the page was updated by MariaDB Server 10.3. Earlier versions
would always write the TRX_UNDO_PAGE_TYPE as 1 or 2.
trx_undo_header_create(): Zero out the TRX_UNDO_TRX_NO field.
Strictly speaking, this will change the semantics of the
MLOG_UNDO_HDR_CREATE record, but it should not do any harm to
overwrite a potentially garbage field with zeroes.
Note: This fix will only help future upgrades straight from
MariaDB Server 10.2 or MySQL 5.6 or earlier. If such an upgrade has
already been made, then an earlier server startup could have
fast-forwarded the transaction ID sequence to a large value.
If this large value cannot be represented in 48 bits (the size of
the DB_TRX_ID column in clustered index records), then various
strange things can happen.
DEBUG_SYNC signals can get lost in certain tests due to later
DEBUG_SYNC commands overwriting them. This patch addresses
these issues in three tests: main.query_cache_debug,
main.partition_debug_sync, and
rpl.rpl_dump_request_retry_warning.
Additionally, main.partition_debug_sync needed changes to the
result file (the others did not). The synchronization happened
between two commands, one based on ALTER, the other on DROP.
A new thread/connection was needed to synchronize the DEBUG_SYNC
actions between these commands, thereby changing the result file.
Additional comments were added for clarification.
Reviewed By:
============
Andrei Elkin <andrei.elkin@mariadb.com>
- Make innodb_ft_cache_size & innodb_ft_total_cache_size are dynamic
variable and increase the maximum value of innodb_ft_cache_size to
512MB for 32-bit system and 1 TB for 64-bit system and set
innodb_ft_total_cache_size maximum value to 1 TB for 64-bit system.
- Print warning if the fts cache exceeds the innodb_ft_cache_size
and also unlock the cache if fts cache memory reduces less than
innodb_ft_cache_size.
This commit adds validation of the values of the ssl-mode parameter
in SSL scripts, since now only a basic check for the presence of the
"VERIFY_" prefix is performed there to detect "VERIFY_IDENTITY" and
"VERIFY_CA", but all other values are not checked at all.
In addition, this commit removes leading and trailing spaces from
parameter values that SST scripts read from configuration files or
from the command line so that they do not interfere with parameter
checks and substitutions. Parameter substitution has been made more
robust against characters in strings that the shell might erroneously
interpret as regexp.
This commit fixes problems due to bugs and quirks in bsdtar
(the FreeBSD version of tar). Separate tests are not required,
because without these fixes, many other tests fail when tested
in the FreeBSD environment.
Also, the grep patterns for reading utility version numbers
has been made more robust. The notation of some options of
the "cut" utility has been changed.
This commit adds correct handling of binlogs for SST using rsync
or mariabackup. Before this fix, binlogs were handled incorrectly -
- only one (last) binary log file was transferred during SST, which
then led to various failures (for example, when trying to list all
events from the binary log). These bugs were long masked by flaws
in the primitive binlogs handling code in the SST scripts, which
causing binary logs files to be erased after transfer or not added
to the binlog index on the joiner node. Now the correct transfer
of all binary logs (not just the last of the binary log files) has
been implemented both for the rsync (at the script level) and for
the mariabackup (at the level of the main utility code).
This commit also adds a new sst_max_binlogs=<n> parameter, which
can be located in the [sst] section or in the [xtrabackup] section
(historically, supported for mariabackup only, not for rsync), or
in one of the server sections. This parameter specifies the number
of binary log files to be sent to the joiner node during SST. This
option is added for compatibility with old SST scripting behavior,
which can be emulated by setting the sst_max_binlogs=1 (although
in general this can cause problems for the reasons described above).
In addition, setting the sst_max_binlogs=0 can be used to suppress
the transmission of binary logs to the joiner nodes during SST
(although sometimes a single file with the current binary log can
still be transmitted to the joiner, even with sst_max_binlogs=0,
because this sometimes necessary in modes that involve the use of
GTIDs with Galera).
Also, this commit ensures correct handling of paths to various
innodb files and directories in the SST scripts, and fixes some
problems with this that existed in mariabackup utility (which
were associated with incorrect handling of the innodb_data_dir
parameter in some scenarios).
In addition, this commit contains the following enhancements:
1) Added tests for mtr, which check the correct work with binlogs
after SST (using rsync and mariabackup);
2) Added correct handling of slashes at the end of all paths that
the SST script receives as parameters;
3) Improved parsing code for --mysqld-args parameters. Now it
correctly processes the sequence "--" after the name of the
one-letter option;
4) Checking the secret signature during joiner authentication
is made independent of presence of bash (as a unix shell)
in the system and diff utility no longer needed to check
certificates compliance;
5) All directories that are necessary for the correct placement
of various logs are automatically created by SST scripts in
advance (before running mariabackup on the joiner node);
6) Removal of old binary logs on joiner is done using the binlog
index (if it exists) (not only by fixed pattern that based
on the current binlog name, as before);
7) Paths for placing binary logs are correctly processed if they
are set as relative paths (to the datadir);
8) SST scripts are made even more resistant to spaces in filenames
(now for binlogs);
9) In case of failure, SST scripts now always end with an exit
code other than zero;
10) SST script for rsync now correctly create a tar file with
the binlogs, even if the paths to them (in the binlog index
file) are specified as a mix of absolute and relative paths,
and even if they do not match with the datadir path specified
in the current configuration settings.
(Edits by SergeiP: fix encryption.tempfiles_encrypted, re-word comment)
Global ORDER BY clause of a UNION may not refer to 1) aggregate functions
or 2) window functions. setup_order() checked for #1 but not for #2.
[Patch idea by Igor Babaev]
Symptom: for IN (SELECT ...) subqueries using IN-to-EXISTS transformation,
the optimizer was unable to make inferences using multiple equalities.
The cause is code Item_in_subselect::inject_in_to_exists_cond() which may
break invariants that Multiple-Equality code relies on. In particular, it
may produce a WHERE condition with an empty Item_cond::m_cond_equal.
Fixed this by making Item_cond::m_cond_equal.
Backported from 10.5 20e9e804c1 and
5948d7602e.
sel_restore_position_for_mysql() moves forward persistent cursor
position after btr_pcur_restore_position() call if cursor relative position
is BTR_PCUR_ON and the cursor points to the record with NOT the same field
values as in a stored record(and some other not important for this case
conditions).
It was done because btr_pcur_restore_position() sets
page_cur_mode_t mode to PAGE_CUR_LE for cursor->rel_pos == BTR_PCUR_ON
before opening cursor. So we are searching for the record less or equal
to stored one. And if the found record is not equal to stored one, then
it is less and we need to move cursor forward.
But there can be a situation when the stored record was purged, but the
new one with the same key but different value was inserted while
row_search_mvcc() was suspended. In this case, when the thread is
awaken, it will invoke sel_restore_position_for_mysql(), which, in turns,
invoke btr_pcur_restore_position(), which will return false because found
record don't match stored record, and
sel_restore_position_for_mysql() will move forward cursor position.
The above can lead to the case when awaken row_search_mvcc() do not see
records inserted by other transactions while it slept. The mtr test case
shows the example how it can be.
The fix is to return special value from persistent cursor restoring
function which would notify its caller that uniq fields of restored
record and stored record are the same, and in this case
sel_restore_position_for_mysql() don't move cursor forward.
Delete-marked records are correctly processed in row_search_mvcc().
Non-unique secondary indexes are "uniquified" by adding the PK, the
index->n_uniq should then be index->n_fields. So there is no need in
additional checks in the fix.
If transaction's readview can't see the changes made in secondary index
record, it requests clustered index record in row_search_mvcc() to check
its transaction id and get the correspondent record version. After this
row_search_mvcc() commits mtr to preserve clustered index latching
order, and starts mtr. Between those mtr commit and start secondary
index pages are unlatched, and purge has the ability to remove stored in
the cursor record, what causes rows duplication in result set for
non-locking reads, as cursor position is restored to the previously
visited record.
To solve this the changes are just switched off for non-locking reads,
it's quite simple solution, besides the changes don't make sense for
non-locking reads.
The more complex and effective from performance perspective solution is
to create mtr savepoint before clustered record requesting and rolling
back to that savepoint after that. See MDEV-27557.
One more solution is to have per-record transaction id for secondary
indexes. See MDEV-17598.
If any of those is implemented, just remove select_lock_type argument in
sel_restore_position_for_mysql().
The result is not used anywhere but in the output of Innodb information
schema, but this can take as much as 7%CPU (only) on a benchmark.
Fix to move fs blocksize calculate to where it is used.
The sys_var class has the deprecation_substitute member to mark the
deprecated variables. As it's set, the server produces warnings when
these variables are used. However, the plugin has no means to utilize
that functionality.
So, the PLUGIN_VAR_DEPRECATED flag is introduced to set the
deprecation_substitute with the empty string. A non-empty string can
make the warning more informative, but there's no nice way seen to
specify it, and not that needed at the moment.
convert_error_code_to_mysql(): Use the correct limit FK_MAX_CASCADE_DEL
in the error message. The DICT_FK_MAX_RECURSIVE_LOAD applies to
the number of foreign key constraints in table definitions,
not to the number of rows that are visited while processing
a foreign key constraint.
MDEV-22500 Assertion `thd->killed != 0' failed in ha_maria::enable_indexes
For MDEV-17223 the issue was an assert that didn't take into account that
we could get duplicate key errors when enablling unique indexes.
Fixed by not retrying repair in case of duplicate key error for this
case, which avoids the assert.
For MDEV-22500 I removed the assert, as it's not critical (just a way to
find potential wrong code) and we will anyway get things logged in the
error log if this happens. This case cannot triggered an assert in 10.3
but I verified that it would trigger in 10.5 and that this patch fixes
it.
Some GNU/Linux distributions ship a zlib that is modified to use
the s390x DFLTCC instruction. That modification would essentially
redefine compressBound(sourceLen) as (sourceLen * 16 + 2308) / 8 + 6.
Let us relax the tests for InnoDB ROW_FORMAT=COMPRESSED to cope with
such a weaker compression guarantee.
create_table_info_t::row_size_is_acceptable(): Remove a bogus debug-only
assertion that would fail to hold for the test innodb_zip.bug36169.
The function page_zip_empty_size() may indeed return 0.
Added ability to disable/enable (--disable_view_protocol/--enable_view_protocol) view-protocol in tests.
When the option "--disable_view_protocol" is used util connections are closed.
Added new test for checking view-protocol
The rpl.rpl_seconds_behind_master_spike test would sometimes
timeout or take a very long time to complete. This happened
because an MTR DEBUG_SYNC signal would be lost due to a
subsequent call to RESET. I.e., the slave SQL thread would
be paused due to the WAIT_FOR signal being lost, resulting in
either a failed test if the `select master_pos_wait` timeout
occurs first, or a very long run-time if the DBUG_SYNC timeout
occurs first.
The fix ensures that the MTR signal is processed by the slave
SQL thread before issuing the call to RESET
Reviewed By:
============
Andrei Elkin <andrei.elkin@mariadb.com>
