This bug is essentially another variant of MDEV-7458.
If a transaction conflict caused a deadlock kill of T2 in record_gtid()
during commit, the code would do a rollback _before_ running
rgi->unmark_start_commit(). This creates a race where following transactions
could start too early (before T2 has completed its transaction retry). This
in turn could lead to replication failure, if there was a conflict that
caused eg. duplicate key error or similar.
The fix is to remove these rollbacks (in Query_log_event::do_apply_event()
and Xid_log_event::do_apply_event(). They seem out-of-place; code in
log_event.cc generally does not roll back on error, this is handled higher
up.
In addition, because of the extreme difficulty of reproducing bugs like
MDEV-7458 and MDEV-8302, this patch adds some extra precations to try to
detect (in debug builds) or prevent (in release builds) similar bugs.
ha_rollback_trans() will now call unmark_start_commit() if needed (and
assert in debug build when a caller does rollback without unmark first).
We also add an extra check for thd->killed() so that we avoid doing
mark_start_commit() if we already have a pending deadlock kill.
And we add a missing unmark_start_commit() call in the error case, found by
the above assertion.
in ha_delete_table()
* only convert ENOENT and HA_ERR_NO_SUCH_TABLE to warnings
* only return real error codes (that is, not ENOENT and
not HA_ERR_NO_SUCH_TABLE)
* intercept HA_ERR_ROW_IS_REFERENCED to generate backward
compatible ER_ROW_IS_REFERENCED
in mysql_rm_table_no_locks()
* no special code to handle HA_ERR_ROW_IS_REFERENCED
* no special code to handle ENOENT and HA_ERR_NO_SUCH_TABLE
* return multi-table error ER_BAD_TABLE_ERROR <table list> only
when there were many errors, not when there were many
tables to drop (but only one table generated an error)
Parallel replication (in 10.0 / "conservative" mode) relies on binlog group
commits to group transactions that can be safely run in parallel on the
slave. The --binlog-commit-wait-count and --binlog-commit-wait-usec options
exist to increase the number of commits per group. But in case of conflicts
between transactions, this can cause unnecessary delay and reduced througput,
especially on a slave where commit order is fixed.
This patch adds a heuristics to reduce this problem. When transaction T1 goes
to commit, it will first wait for N transactions to queue up for a group
commit. However, if we detect that another transaction T2 is waiting for a row
lock held by T1, then we will skip the wait and let T1 commit immediately,
releasing locks and let T2 continue.
On a slave, this avoids the unfortunate situation where T1 is waiting for T2
to join the group commit, but T2 is waiting for T1 to release locks, causing
no work to be done for the duration of the --binlog-commit-wait-usec timeout.
(The heuristic seems reasonable on the master as well, so it is enabled for
all transactions, not just replication transactions).
In parallel replication, don't rollback inside ha_commit_trans() in case of
error.
The rollback will be done later, but the parallel replication code needs to
run unmark_start_commit() before the rollback to properly control the
sequencing of transactions.
I did not manage to come up with a reliable automatic test case for this, but
I tested it manually.
This bug was seen when parallel replication experienced a deadlock between
transactions T1 and T2, where T2 has reached the commit phase and is waiting
for T1 to commit first. In this case, the deadlock is broken by sending a kill
to T2; that kill error is then later detected and converted to a deadlock
error, which causes T2 to be rolled back and retried.
The problem was that the kill caused ha_commit_trans() to errorneously call
wakeup_subsequent_commits() on T3, signalling it to abort because T2 failed
during commit. This is incorrect, because the error in T2 is only a temporary
error, which will be resolved by normal transaction retry. We should not
signal error to the next transaction until we have executed the code that
handles such temporary errors.
So this patch just removes the calls to wakeup_subsequent_commits() from
ha_commit_trans(). They are incorrect in this case, and they are not needed in
general, as wakeup_subsequent_commits() must in any case be called in
finish_event_group() to wakeup any transactions that may have started to wait
after ha_commit_trans(). And normally, wakeup will in fact have happened
earlier, either from the binlog group commit code, or (in case of no
binlogging) after the fast part of InnoDB/XtraDB group commit.
The symptom of this bug was that replication would break on some transaction
with "Commit failed due to failure of an earlier commit on which this one
depends", but with no such failure of an earlier commit visible anywhere.
The reason for the failure was a bug in an include file on debian that causes 'struct stat'
to have different sized depending on the environment.
This patch fixes so that we always include my_global.h or my_config.h before we include any other files.
Other things:
- Removed #include <my_global.h> in some include files; Better to always do this at the top level to have as few
"always-include-this-file-first' files as possible.
- Removed usage of some include files that where already included by my_global.h or by other files.
client/mysql_plugin.c:
Use my_global.h first
client/mysqlslap.c:
Remove duplicated include files
extra/comp_err.c:
Remove duplicated include files
include/m_string.h:
Remove duplicated include files
include/maria.h:
Remove duplicated include files
libmysqld/emb_qcache.cc:
Use my_global.h first
plugin/semisync/semisync.h:
Use my_pthread.h first
sql/datadict.cc:
Use my_global.h first
sql/debug_sync.cc:
Use my_global.h first
sql/derror.cc:
Use my_global.h first
sql/des_key_file.cc:
Use my_global.h first
sql/discover.cc:
Use my_global.h first
sql/event_data_objects.cc:
Use my_global.h first
sql/event_db_repository.cc:
Use my_global.h first
sql/event_parse_data.cc:
Use my_global.h first
sql/event_queue.cc:
Use my_global.h first
sql/event_scheduler.cc:
Use my_global.h first
sql/events.cc:
Use my_global.h first
sql/field.cc:
Use my_global.h first
Remove duplicated include files
sql/field_conv.cc:
Use my_global.h first
sql/filesort.cc:
Use my_global.h first
Remove duplicated include files
sql/gstream.cc:
Use my_global.h first
sql/ha_ndbcluster.cc:
Use my_global.h first
sql/ha_ndbcluster_binlog.cc:
Use my_global.h first
sql/ha_ndbcluster_cond.cc:
Use my_global.h first
sql/ha_partition.cc:
Use my_global.h first
sql/handler.cc:
Use my_global.h first
sql/hash_filo.cc:
Use my_global.h first
sql/hostname.cc:
Use my_global.h first
sql/init.cc:
Use my_global.h first
sql/item.cc:
Use my_global.h first
sql/item_buff.cc:
Use my_global.h first
sql/item_cmpfunc.cc:
Use my_global.h first
sql/item_create.cc:
Use my_global.h first
sql/item_geofunc.cc:
Use my_global.h first
sql/item_inetfunc.cc:
Use my_global.h first
sql/item_row.cc:
Use my_global.h first
sql/item_strfunc.cc:
Use my_global.h first
sql/item_subselect.cc:
Use my_global.h first
sql/item_sum.cc:
Use my_global.h first
sql/item_timefunc.cc:
Use my_global.h first
sql/item_xmlfunc.cc:
Use my_global.h first
sql/key.cc:
Use my_global.h first
sql/lock.cc:
Use my_global.h first
sql/log.cc:
Use my_global.h first
sql/log_event.cc:
Use my_global.h first
sql/log_event_old.cc:
Use my_global.h first
sql/mf_iocache.cc:
Use my_global.h first
sql/mysql_install_db.cc:
Remove duplicated include files
sql/mysqld.cc:
Remove duplicated include files
sql/net_serv.cc:
Remove duplicated include files
sql/opt_range.cc:
Use my_global.h first
sql/opt_subselect.cc:
Use my_global.h first
sql/opt_sum.cc:
Use my_global.h first
sql/parse_file.cc:
Use my_global.h first
sql/partition_info.cc:
Use my_global.h first
sql/procedure.cc:
Use my_global.h first
sql/protocol.cc:
Use my_global.h first
sql/records.cc:
Use my_global.h first
sql/records.h:
Don't include my_global.h
Better to do this at the upper level
sql/repl_failsafe.cc:
Use my_global.h first
sql/rpl_filter.cc:
Use my_global.h first
sql/rpl_gtid.cc:
Use my_global.h first
sql/rpl_handler.cc:
Use my_global.h first
sql/rpl_injector.cc:
Use my_global.h first
sql/rpl_record.cc:
Use my_global.h first
sql/rpl_record_old.cc:
Use my_global.h first
sql/rpl_reporting.cc:
Use my_global.h first
sql/rpl_rli.cc:
Use my_global.h first
sql/rpl_tblmap.cc:
Use my_global.h first
sql/rpl_utility.cc:
Use my_global.h first
sql/set_var.cc:
Added comment
sql/slave.cc:
Use my_global.h first
sql/sp.cc:
Use my_global.h first
sql/sp_cache.cc:
Use my_global.h first
sql/sp_head.cc:
Use my_global.h first
sql/sp_pcontext.cc:
Use my_global.h first
sql/sp_rcontext.cc:
Use my_global.h first
sql/spatial.cc:
Use my_global.h first
sql/sql_acl.cc:
Use my_global.h first
sql/sql_admin.cc:
Use my_global.h first
sql/sql_analyse.cc:
Use my_global.h first
sql/sql_audit.cc:
Use my_global.h first
sql/sql_base.cc:
Use my_global.h first
sql/sql_binlog.cc:
Use my_global.h first
sql/sql_bootstrap.cc:
Use my_global.h first
Use my_global.h first
sql/sql_cache.cc:
Use my_global.h first
sql/sql_class.cc:
Use my_global.h first
sql/sql_client.cc:
Use my_global.h first
sql/sql_connect.cc:
Use my_global.h first
sql/sql_crypt.cc:
Use my_global.h first
sql/sql_cursor.cc:
Use my_global.h first
sql/sql_db.cc:
Use my_global.h first
sql/sql_delete.cc:
Use my_global.h first
sql/sql_derived.cc:
Use my_global.h first
sql/sql_do.cc:
Use my_global.h first
sql/sql_error.cc:
Use my_global.h first
sql/sql_explain.cc:
Use my_global.h first
sql/sql_expression_cache.cc:
Use my_global.h first
sql/sql_handler.cc:
Use my_global.h first
sql/sql_help.cc:
Use my_global.h first
sql/sql_insert.cc:
Use my_global.h first
sql/sql_lex.cc:
Use my_global.h first
sql/sql_load.cc:
Use my_global.h first
sql/sql_locale.cc:
Use my_global.h first
sql/sql_manager.cc:
Use my_global.h first
sql/sql_parse.cc:
Use my_global.h first
sql/sql_partition.cc:
Use my_global.h first
sql/sql_plugin.cc:
Added comment
sql/sql_prepare.cc:
Use my_global.h first
sql/sql_priv.h:
Added error if we use this before including my_global.h
This check is here becasue so many files includes sql_priv.h first.
sql/sql_profile.cc:
Use my_global.h first
sql/sql_reload.cc:
Use my_global.h first
sql/sql_rename.cc:
Use my_global.h first
sql/sql_repl.cc:
Use my_global.h first
sql/sql_select.cc:
Use my_global.h first
sql/sql_servers.cc:
Use my_global.h first
sql/sql_show.cc:
Added comment
sql/sql_signal.cc:
Use my_global.h first
sql/sql_statistics.cc:
Use my_global.h first
sql/sql_table.cc:
Use my_global.h first
sql/sql_tablespace.cc:
Use my_global.h first
sql/sql_test.cc:
Use my_global.h first
sql/sql_time.cc:
Use my_global.h first
sql/sql_trigger.cc:
Use my_global.h first
sql/sql_udf.cc:
Use my_global.h first
sql/sql_union.cc:
Use my_global.h first
sql/sql_update.cc:
Use my_global.h first
sql/sql_view.cc:
Use my_global.h first
sql/sys_vars.cc:
Added comment
sql/table.cc:
Use my_global.h first
sql/thr_malloc.cc:
Use my_global.h first
sql/transaction.cc:
Use my_global.h first
sql/uniques.cc:
Use my_global.h first
sql/unireg.cc:
Use my_global.h first
sql/unireg.h:
Removed inclusion of my_global.h
storage/archive/ha_archive.cc:
Added comment
storage/blackhole/ha_blackhole.cc:
Use my_global.h first
storage/csv/ha_tina.cc:
Use my_global.h first
storage/csv/transparent_file.cc:
Use my_global.h first
storage/federated/ha_federated.cc:
Use my_global.h first
storage/federatedx/federatedx_io.cc:
Use my_global.h first
storage/federatedx/federatedx_io_mysql.cc:
Use my_global.h first
storage/federatedx/federatedx_io_null.cc:
Use my_global.h first
storage/federatedx/federatedx_txn.cc:
Use my_global.h first
storage/heap/ha_heap.cc:
Use my_global.h first
storage/innobase/handler/handler0alter.cc:
Use my_global.h first
storage/maria/ha_maria.cc:
Use my_global.h first
storage/maria/unittest/ma_maria_log_cleanup.c:
Remove duplicated include files
storage/maria/unittest/test_file.c:
Added comment
storage/myisam/ha_myisam.cc:
Move sql_plugin.h first as this includes my_global.h
storage/myisammrg/ha_myisammrg.cc:
Use my_global.h first
storage/oqgraph/oqgraph_thunk.cc:
Use my_config.h and my_global.h first
One could not include my_global.h before oqgraph_thunk.h (don't know why)
storage/spider/ha_spider.cc:
Use my_global.h first
storage/spider/hs_client/config.cpp:
Use my_global.h first
storage/spider/hs_client/escape.cpp:
Use my_global.h first
storage/spider/hs_client/fatal.cpp:
Use my_global.h first
storage/spider/hs_client/hstcpcli.cpp:
Use my_global.h first
storage/spider/hs_client/socket.cpp:
Use my_global.h first
storage/spider/hs_client/string_util.cpp:
Use my_global.h first
storage/spider/spd_conn.cc:
Use my_global.h first
storage/spider/spd_copy_tables.cc:
Use my_global.h first
storage/spider/spd_db_conn.cc:
Use my_global.h first
storage/spider/spd_db_handlersocket.cc:
Use my_global.h first
storage/spider/spd_db_mysql.cc:
Use my_global.h first
storage/spider/spd_db_oracle.cc:
Use my_global.h first
storage/spider/spd_direct_sql.cc:
Use my_global.h first
storage/spider/spd_i_s.cc:
Use my_global.h first
storage/spider/spd_malloc.cc:
Use my_global.h first
storage/spider/spd_param.cc:
Use my_global.h first
storage/spider/spd_ping_table.cc:
Use my_global.h first
storage/spider/spd_sys_table.cc:
Use my_global.h first
storage/spider/spd_table.cc:
Use my_global.h first
storage/spider/spd_trx.cc:
Use my_global.h first
storage/xtradb/handler/handler0alter.cc:
Use my_global.h first
storage/xtradb/handler/i_s.cc:
Use my_global.h first
* handler::get_auto_increment() was not expecting any errors from the storage engine.
That was wrong, errors could happen.
* ha_partition::get_auto_increment() was doing index lookups in partition under a mutex.
This was redundant (engine transaction isolation was covering that anyway)
and harmful (causing deadlocks).
We don't support changing tc_log implementation at run time.
If the first XA-capable engine is loaded with INSTALL PLUGIN - disable its
XA capabilities with a warning
Reason for the problem was that the hash of changed files in the key cache was too small (was 128). Fixed by making the hash size larger and changeable.
- Introduced key-cache-file-hash-size (default 512) for MyISAM and aria_pagecache_file_hash_size (default 512) for Aria.
- Added new status variable "Feature_delay_key_write" which counts number of tables opened that are using delay_key_write
mysql-test/r/features.result:
Added test of Feature_delay_key_write
mysql-test/r/key_cache.result:
Updated tests as the number of blocks has changed
mysql-test/r/mysqld--help.result:
Updated result
mysql-test/suite/maria/maria3.result:
Updated result
mysql-test/suite/sys_vars/r/key_cache_file_hash_size_basic.result:
Test new variable
mysql-test/suite/sys_vars/t/aria_pagecache_file_hash_size_basic.test:
Test new variable
mysql-test/suite/sys_vars/t/key_cache_file_hash_size_basic.test:
Test new variable
mysql-test/t/features.test:
Added test of Feature_delay_key_write
mysql-test/t/key_cache.test:
Updated tests as the number of blocks has changed
mysys/mf_keycache.c:
Made CHANGED_BLOCKS_HASH dynamic
sql/handler.cc:
Updated call to init_key_cache()
sql/mysqld.cc:
Added "Feature_delay_key_write"
Added support for key-cache-file-hash-size
sql/mysqld.h:
Added support for key-cache-file-hash-size
sql/sql_class.h:
Added feature_files_opened_with_delayed_keys
sql/sys_vars.cc:
Added key_cache_file_hash_size
storage/maria/ha_maria.cc:
Added pagecache_file_hash_size
Added counting of files with delay_key_write
storage/maria/ma_checkpoint.c:
Fixed compiler warning
storage/maria/ma_pagecache.c:
Made PAGECACHE_CHANGED_BLOCKS_HASH into a variable
storage/maria/ma_pagecache.h:
Made PAGECACHE_CHANGED_BLOCKS_HASH into a variable
storage/maria/ma_rt_test.c:
Updated parameters for init_pagecache()
storage/maria/ma_test1.c:
Updated parameters for init_pagecache()
storage/maria/ma_test2.c:
Updated parameters for init_pagecache()
storage/maria/ma_test3.c:
Updated parameters for init_pagecache()
storage/maria/maria_chk.c:
Updated parameters for init_pagecache()
storage/maria/maria_ftdump.c:
Updated parameters for init_pagecache()
storage/maria/maria_pack.c:
Updated parameters for init_pagecache()
storage/maria/maria_read_log.c:
Updated parameters for init_pagecache()
storage/maria/unittest/ma_pagecache_consist.c:
Updated parameters for init_pagecache()
storage/maria/unittest/ma_pagecache_rwconsist.c:
Updated parameters for init_pagecache()
storage/maria/unittest/ma_pagecache_rwconsist2.c:
Updated parameters for init_pagecache()
storage/maria/unittest/ma_pagecache_single.c:
Updated parameters for init_pagecache()
storage/maria/unittest/ma_test_loghandler-t.c:
Updated parameters for init_pagecache()
storage/maria/unittest/ma_test_loghandler_first_lsn-t.c:
Updated parameters for init_pagecache()
storage/maria/unittest/ma_test_loghandler_max_lsn-t.c:
Updated parameters for init_pagecache()
storage/maria/unittest/ma_test_loghandler_multigroup-t.c:
Updated parameters for init_pagecache()
storage/maria/unittest/ma_test_loghandler_multithread-t.c:
Updated parameters for init_pagecache()
storage/maria/unittest/ma_test_loghandler_noflush-t.c:
Updated parameters for init_pagecache()
storage/maria/unittest/ma_test_loghandler_nologs-t.c:
Updated parameters for init_pagecache()
storage/maria/unittest/ma_test_loghandler_pagecache-t.c:
Updated parameters for init_pagecache()
storage/maria/unittest/ma_test_loghandler_purge-t.c:
Updated parameters for init_pagecache()
storage/myisam/ha_myisam.cc:
Added counting of files with delay_key_write
storage/myisam/mi_check.c:
Updated call to init_key_cache()
storage/myisam/mi_test1.c:
Updated call to init_key_cache()
storage/myisam/mi_test2.c:
Updated call to init_key_cache()
storage/myisam/mi_test3.c:
Updated call to init_key_cache()
storage/myisam/mi_test_all.sh:
Fixed broken test
storage/myisam/myisam_ftdump.c:
Updated call to init_key_cache()
storage/myisam/myisamchk.c:
Updated call to init_key_cache()
storage/myisam/myisamlog.c:
Updated call to init_key_cache()
use the Alter_inplace_info::ALTER_COLUMN_OPTION flag if
field/column flags were altered.
change ha_example to use check_if_supported_inplace_alter() instead
of obsolete check_if_incompatible_data()
The problem was that on opening all tables TL_WRITE, than local tables which is not updated set to TL_READ, but underlying tables of MyISAMmrg left untouched.
Prartition engine has not this problem.
All cases where lock_type assigned is not changed because call of virtual function is not cheap.
Revert the old patch revid:monty@askmonty.org-20100325133339-7mkel6valai0b4lb
This patch caused the InnoDB part of the transaction to not be marked
read-write in some cases, which messes up XA commit (and likely other
stuff as well).
Fix ha_table_exists() to take discovery into account correctly.
It must be able to discover both table existence (when no frm is
found) and table non-existance (when frm was found).
This is port of fix for MySQL BUG#17647863.
revno: 5572
revision-id: jon.hauglid@oracle.com-20131030232243-b0pw98oy72uka2sj
committer: Jon Olav Hauglid <jon.hauglid@oracle.com>
timestamp: Thu 2013-10-31 00:22:43 +0100
message:
Bug#17647863: MYSQL DOES NOT COMPILE ON OSX 10.9 GM
Rename test() macro to MY_TEST() to avoid conflict with libc++.
- CREATE TABLE is by default executed on the slave as CREATE OR REPLACE
- DROP TABLE is by default executed on the slave as DROP TABLE IF NOT EXISTS
This means that a slave will by default continue even if we try to create
a table that existed on the slave (the table will be deleted and re-created) or
if we try to drop a table that didn't exist on the slave.
This should be safe as instead of having the slave stop because of an inconsistency between
master and slave, it will fix the inconsistency.
Those that would prefer to get a stopped slave instead for the above cases can set slave_ddl_exec_mode to STRICT.
- Ensure that a CREATE OR REPLACE TABLE which dropped a table is replicated
- DROP TABLE that generated an error on master is handled as an identical DROP TABLE on the slave (IF NOT EXISTS is not added in this case)
- Added slave_ddl_exec_mode variable to decide how DDL's are replicated
New logic for handling BEGIN GTID ... COMMIT from the binary log:
- When we find a BEGIN GTID, we start a transaction and set OPTION_GTID_BEGIN
- When we find COMMIT, we reset OPTION_GTID_BEGIN and execute the normal COMMIT code.
- While OPTION_GTID_BEGIN is set:
- We don't generate implict commits before or after statements
- All tables are regarded as transactional tables in the binary log (to ensure things are executed exactly as on the master)
- We reset OPTION_GTID_BEGIN also on rollback
This will help ensuring that we don't get any sporadic commits (and thus new GTID's) on the slave and will help keep the GTID's between master and slave in sync.
mysql-test/extra/rpl_tests/rpl_log.test:
Added testing of mode slave_ddl_exec_mode=STRICT
mysql-test/r/mysqld--help.result:
New help messages
mysql-test/suite/rpl/r/create_or_replace_mix.result:
Testing of CREATE OR REPLACE TABLE with replication
mysql-test/suite/rpl/r/create_or_replace_row.result:
Testing of CREATE OR REPLACE TABLE with replication
mysql-test/suite/rpl/r/create_or_replace_statement.result:
Testing replication of create or replace
mysql-test/suite/rpl/r/rpl_gtid_startpos.result:
Test must be run in slave_ddl_exec_mode=STRICT as part of the test depends on that DROP TABLE should fail on slave.
mysql-test/suite/rpl/r/rpl_row_log.result:
Updated result
mysql-test/suite/rpl/r/rpl_row_log_innodb.result:
Updated result
mysql-test/suite/rpl/r/rpl_row_show_relaylog_events.result:
Updated result
mysql-test/suite/rpl/r/rpl_stm_log.result:
Updated result
mysql-test/suite/rpl/r/rpl_stm_mix_show_relaylog_events.result:
Updated result
mysql-test/suite/rpl/r/rpl_temp_table_mix_row.result:
Updated result
mysql-test/suite/rpl/t/create_or_replace.inc:
Testing of CREATE OR REPLACE TABLE with replication
mysql-test/suite/rpl/t/create_or_replace_mix.cnf:
Testing of CREATE OR REPLACE TABLE with replication
mysql-test/suite/rpl/t/create_or_replace_mix.test:
Testing of CREATE OR REPLACE TABLE with replication
mysql-test/suite/rpl/t/create_or_replace_row.cnf:
Testing of CREATE OR REPLACE TABLE with replication
mysql-test/suite/rpl/t/create_or_replace_row.test:
Testing of CREATE OR REPLACE TABLE with replication
mysql-test/suite/rpl/t/create_or_replace_statement.cnf:
Testing of CREATE OR REPLACE TABLE with replication
mysql-test/suite/rpl/t/create_or_replace_statement.test:
Testing of CREATE OR REPLACE TABLE with replication
mysql-test/suite/rpl/t/rpl_gtid_startpos.test:
Test must be run in slave_ddl_exec_mode=STRICT as part of the test depends on that DROP TABLE should fail on slave.
mysql-test/suite/rpl/t/rpl_stm_log.test:
Removed some lines
mysql-test/suite/sys_vars/r/slave_ddl_exec_mode_basic.result:
Testing of slave_ddl_exec_mode
mysql-test/suite/sys_vars/t/slave_ddl_exec_mode_basic.test:
Testing of slave_ddl_exec_mode
sql/handler.cc:
Regard all tables as transactional in commit if OPTION_GTID_BEGIN is set.
This is to ensure that statments are not commited too early if non transactional tables are used.
sql/log.cc:
Regard all tables as transactional in commit if OPTION_GTID_BEGIN is set.
Also treat 'direct' log events as transactional (to get them logged as they where on the master)
sql/log_event.cc:
Ensure that the new error from DROP TABLE when trying to drop a view is treated same as the old one.
Store error code that slave expects in THD.
Set OPTION_GTID_BEGIN if we find a BEGIN.
Reset OPTION_GTID_BEGIN if we find a COMMIT.
sql/mysqld.cc:
Added slave_ddl_exec_mode_options
sql/mysqld.h:
Added slave_ddl_exec_mode_options
sql/rpl_gtid.cc:
Reset OPTION_GTID_BEGIN if we record a gtid (safety)
sql/sql_class.cc:
Regard all tables as transactional in commit if OPTION_GTID_BEGIN is set.
sql/sql_class.h:
Added to THD: log_current_statement and slave_expected_error
sql/sql_insert.cc:
Ensure that CREATE OR REPLACE is logged if table was deleted.
Don't do implicit commit for CREATE if we are under OPTION_GTID_BEGIN
sql/sql_parse.cc:
Change CREATE TABLE -> CREATE OR REPLACE TABLE for slaves
Change DROP TABLE -> DROP TABLE IF EXISTS for slaves
CREATE TABLE doesn't force implicit commit in case of OPTION_GTID_BEGIN
Don't do commits before or after any statement if OPTION_GTID_BEGIN was set.
sql/sql_priv.h:
Added OPTION_GTID_BEGIN
sql/sql_show.cc:
Enhanced store_create_info() to also be able to handle CREATE OR REPLACE
sql/sql_show.h:
Updated prototype
sql/sql_table.cc:
Ensure that CREATE OR REPLACE is logged if table was deleted.
sql/sys_vars.cc:
Added slave_ddl_exec_mode
sql/transaction.cc:
Added warning if we got a GTID under OPTION_GTID_BEGIN
mysql_upgrade --help now also prints out --default options and variable values.
mysql_upgrade now prints permission errors.
mysql_upgrade doesn't print some non essential info if --silent is used.
Added handler error message about incompatible versions
Fixed that mysqlbug and mysql_install_db have the executable flag set.
Removed executable flag for some non executable files.
Changed in mysql_install_db askmonty.org to mariadb.com.
Ensured that all client executables prints --default options the same way.
Allow REPAIR ... USE_FRM for old .frm files if the are still compatible.
Extended shown error for storage engine messages.
client/mysql.cc:
print_defaults() should be first (as in all other programs)
client/mysql_upgrade.c:
--help now also prints out --default options and variable values
Print out error if wrong permissions
Don't print info if --silent
client/mysqladmin.cc:
print_defaults() should be first (as in all other programs)
client/mysqlbinlog.cc:
Added print_defaults() to --help
client/mysqlcheck.c:
Added empty line in --help
client/mysqlimport.c:
Added empty line in --help
client/mysqlshow.c:
Made --help compatible
client/mysqlslap.c:
Made --help compatible
client/mysqltest.cc:
Added print_defaults() to --help
include/handler_ername.h:
Added handler error message
include/my_base.h:
Added handler error message
mysql-test/r/mysql_upgrade.result:
Updated results
mysql-test/r/repair.result:
Added test case for better error messages
mysql-test/std_data/host_old.MYD:
Added test case for better error messages
mysql-test/std_data/host_old.MYI:
Added test case for better error messages
mysql-test/std_data/host_old.frm:
Added test case for better error messages
mysql-test/t/repair.test:
Added test case for better error messages
mysys/my_handler_errors.h:
Added handler error message
scripts/CMakeLists.txt:
Fixed that mysqlbug and mysql_install_db have the executable flag set
scripts/mysql_install_db.sh:
askmonty.org -> mariadb.com
sql/ha_partition.cc:
Sometimes table_type() can be called for errors even if partition didn't manage to open any files
sql/handler.cc:
Write clear text for not handled, but defined error messages.
sql/share/errmsg-utf8.txt:
Extended shown error for storage engine messages
sql/sql_admin.cc:
Allow REPAIR ... USE_FRM for old .frm files if the are still compatible
storage/myisam/ha_myisam.cc:
Use new error message
Add another test case. This one for killing a query that is waiting
for a prior commit, when --log-slave-updates=0 (in this case the
wait happens in different code from --log-slave-updates=1).
- Added MALLOC_LIBRARY variable to hold name of malloc library
- Back ported valgrind related fixes from jemalloc 3.4.1 to the included jemalloc 3.3.1
- Renamed bitmap_init() and bitmap_free() to my_bitmap_init() and my_bitmap_free() to avoid clash with jemalloc 3.4.1
- Use option --soname-synonyms=somalloc=NON to valgrind when using jemalloc
- Show version related variables in mysqld --help
-- Added SHOW_VALUE_IN_HELP marker
Increased back_log to 150 as the original value was a bit too small
CMakeLists.txt:
Added MALLOC_LIBRARY variable to hold name of malloc library
cmake/jemalloc.cmake:
Added MALLOC_LIBRARY variable to hold name of malloc library
config.h.cmake:
Added MALLOC_LIBRARY variable to hold name of malloc library
extra/jemalloc/ChangeLog:
Updates changelog
extra/jemalloc/include/jemalloc/internal/arena.h:
Backported valgrind fixes from jemalloc 3.4.1
extra/jemalloc/include/jemalloc/internal/jemalloc_internal.h.in:
Backported valgrind fixes from jemalloc 3.4.1
extra/jemalloc/include/jemalloc/internal/private_namespace.h:
Backported valgrind fixes from jemalloc 3.4.1
extra/jemalloc/include/jemalloc/internal/tcache.h:
Backported valgrind fixes from jemalloc 3.4.1
extra/jemalloc/src/arena.c:
Backported valgrind fixes from jemalloc 3.4.1
include/my_bitmap.h:
Renamed bitmap_init() and bitmap_free() to my_bitmap_init() and my_bitmap_free() to avoid clash with jemalloc 3.4.1
mysql-test/mysql-test-run.pl:
Use option --soname-synonyms=somalloc=NON to valgrind when using jemalloc
mysql-test/valgrind.supp:
Supression of memory leak in OpenSuse 12.3
mysys/my_bitmap.c:
Renamed bitmap_init() and bitmap_free() to my_bitmap_init() and my_bitmap_free()
sql/ha_ndbcluster_binlog.cc:
Renames
sql/ha_ndbcluster_cond.h:
Renames
sql/ha_partition.cc:
Renames
sql/handler.cc:
Renames
sql/item_subselect.cc:
Renames
sql/log_event.cc:
Renames
sql/log_event_old.cc:
Renames
sql/mysqld.cc:
Renames
Show version related variables in mysqld --help
sql/opt_range.cc:
Renames
sql/opt_table_elimination.cc:
Renames
sql/partition_info.cc:
Renames
sql/rpl_injector.h:
Renames
sql/set_var.h:
Renames
sql/slave.cc:
Renames
sql/sql_bitmap.h:
Renames
sql/sql_insert.cc:
Renames
sql/sql_lex.h:
Renames
sql/sql_parse.cc:
Renames
sql/sql_partition.cc:
Renames
sql/sql_select.cc:
Renames
sql/sql_show.cc:
Renames
sql/sql_update.cc:
Renames
sql/sys_vars.cc:
Show version related variables in mysqld --help
sql/sys_vars.h:
Added SHOW_VALUE_IN_HELP marker for variables that should be shown in --help
sql/table.cc:
Renames
sql/table.h:
Removed not used bitmap_init_value
storage/connect/ha_connect.cc:
Removed compiler warning
storage/maria/ma_open.c:
Renames
unittest/mysys/bitmap-t.c:
Renames
Add a test case for killing a waiting query in parallel replication.
Fix several bugs found:
- We should not wakeup_subsequent_commits() in ha_rollback_trans(), since we
do not know the right wakeup_error() to give.
- When a wait_for_prior_commit() is killed, we must unregister from the
waitee so we do not race and get an extra (non-kill) wakeup.
- We need to deal with error propagation correctly in queue_for_group_commit
when one thread is killed.
- Fix one locking issue in queue_for_group_commit(), we could unlock the
waitee lock too early and this end up processing wakeup() with insufficient
locking.
- Fix Xid_log_event::do_apply_event; if commit fails it must not update the
in-memory @@gtid_slave_pos state.
- Fix and cleanup some things in the rpl_parallel.cc error handling.
- Add a missing check for killed in the slave sql driver thread, to avoid a
race.
merged from 5.6:
Bug#14521864: MYSQL 5.1 TO 5.5 BUGS PARTITIONING
Bug#16589511: MYSQL_UPGRADE FAILS TO WRITE OUT ENTIRE ALTER TABLE ... ALGORITHM= ... STATEMENT
Bug#16274455: CAN NOT ACESS PARTITIONED TABLES WHEN DOWNGRADED FROM 5.6.11 TO 5.6.10
plus minor changes from 5.6, mainly comments
A clean-up: removing the code catching collation incompatibilities
from handler::check_collation_compatibility(), as the collation IDs
are already replaced at this point by TABLE_SHARE::init_from_binary_frm_image.
- Character set code & tests from Alexander Barkov
- Integration with ALTER TABLE, REPAIR and open_table from Monty
The problem was that MySQL 5.6 added some croatian and vitanamese character set collations that are incompatible with MariaDB.
The fix is to move the MariaDB conflicting collation numbers out of the region that MySQL is likely to use.
mysql_upgrade, REPAIR TABLE or ALTER TABLE will fix the collations.
If one tries to access and old incompatible table, one will get the error "Table upgrade required...."
After this patch, MariaDB supports all the MySQL character set collations and the old MariaDB croatian collations, which are closer to the latest standard than the MySQL versions.
New character sets:
ucs2_croatian_mysql561_uca_ci
utf8_croatian_mysql561_uca_ci
utf16_croatian_mysql561_uca_ci
utf32_croatian_mysql561_uca_ci
utf8mb4_croatian_mysql561_uca_ci
Other things:
- Fixed some compiler warnings
- mysql_upgrade prints information about repaired tables.
- Increased version number
VERSION:
Increased VERSION number
client/mysqlcheck.c:
Print repaired table name when using --verbose
include/m_ctype.h:
Add new MariaDB collation regions that are not likely to conflict with MySQL
include/my_base.h:
Added flag to detect if table was opened for ALTER TABLE
mysql-test/r/ctype_ldml.result:
Updated result
mysql-test/r/ctype_uca.result:
Updated result
mysql-test/r/ctype_upgrade.result:
Updated result
mysql-test/r/ctype_utf16_uca.result:
Updated result
mysql-test/r/ctype_utf32_uca.result:
Updated result
mysql-test/r/ctype_utf8mb4_uca.result:
Updated result
mysql-test/std_data/ctype_upgrade:
Test files for testing upgrading of conflicting collations
mysql-test/suite/engines/funcs/r/db_alter_collate_ascii.result:
New collations added
mysql-test/suite/engines/funcs/r/db_alter_collate_utf8.result:
New collations added
mysql-test/suite/innodb/r/innodb_ctype_ldml.result:
Updated test result
mysql-test/suite/innodb/t/innodb_ctype_ldml.test:
Updated test result
mysql-test/suite/plugins/r/show_all_plugins.result:
Updated version number
mysql-test/suite/roles/create_and_drop_role_invalid_user_table.result:
Updated version number
mysql-test/t/ctype_ldml.test:
Updated test
mysql-test/t/ctype_uca.test:
Testing of new collations
mysql-test/t/ctype_upgrade.test:
Testing of upgrading tables with old collations
The test ensures that:
- We will get an error if we try to open a table with old collations.
- CHECK TABLE will detect that the table needs to be upgraded.
- ALTER TABLE and REPAIR will fix the table.
- mysql_upgrade works as expected
mysql-test/t/ctype_utf16_uca.test:
Testing of new collations
mysql-test/t/ctype_utf32_uca.test:
Testing of new collations
mysql-test/t/ctype_utf8mb4_uca.test:
Testing of new collations
mysys/charset-def.c:
Added new character sets
mysys/charset.c:
Always give an error, if requested, if a character set didn't exist
sql/handler.cc:
- Added upgrade_collation() to check if collation is compatible with old version
- check_collation_compatibility() checks if we are using an old collation from MariaDB 5.5 or MySQL 5.6
- ha_check_for_upgrade() returns HA_ADMIN_NEEDS_ALTER if we have an incompatible collation
sql/handler.h:
Added new prototypes
sql/sql_table.cc:
- Mark that tables are opened for ALTER TABLE
- If table needs to be upgraded, ensure we are not using online alter table.
sql/table.cc:
- If we are using an old incompatible collation, change to use the new one and mark table as incompatible.
- Give an error if we try to open an incompatible table.
sql/table.h:
Added error that table needs to be rebuild
storage/connect/ha_connect.cc:
Fixed compiler warning
strings/ctype-uca.c:
New character sets
extend table names discovery (ha_discover_table_names() and Discovered_table_list) to return
or optionally filter out temporary tables ("#sql..."). SHOW commands and I_S tables
typically want temp table filtered out, while DROP DATABASE wants to see them too.
additonally, remove the supression for the warning "Invalid (old?) table or database name"
from mtr, and add it to .test files as needed (we need to test that this warning
does *not* happen in drop.test)
The merge is still missing a few hunks related to temporary tables and
InnoDB log file size. The associated code did not seem to exist in
10.0, so the merge of that needs more work. Until this is fixed, there
are a number of test failures as a result.
Add an error code to the wait_for_commit facility.
Now, when a transaction fails, it can signal the error to
any subsequent transaction that is waiting for it to commit.
The waiting transactions then receive the error code back from
wait_for_prior_commit() and can handle the error appropriately.
Also fix one race that could cause crash if @@slave_parallel_threads
were changed several times quickly in succession.
- Made slaves temporary table multi-thread slave safe by adding mutex around save_temporary_table usage.
- rli->save_temporary_tables is the active list of all used temporary tables
- This is copied to THD->temporary_tables when temporary tables are opened and updated when temporary tables are closed
- Added THD->lock_temporary_tables() and THD->unlock_temporary_tables() to simplify this.
- Relay_log_info->sql_thd renamed to Relay_log_info->sql_driver_thd to avoid wrong usage for merged code.
- Added is_part_of_group() to mark functions that are part of the next function. This replaces setting IN_STMT when events are executed.
- Added is_begin(), is_commit() and is_rollback() functions to Query_log_event to simplify code.
- If slave_skip_counter is set run things in single threaded mode. This simplifies code for skipping events.
- Updating state of relay log (IN_STMT and IN_TRANSACTION) is moved to one single function: update_state_of_relay_log()
We can't use OPTION_BEGIN to check for the state anymore as the sql_driver and sql execution threads may be different.
Clear IN_STMT and IN_TRANSACTION in init_relay_log_pos() and Relay_log_info::cleanup_context() to ensure the flags doesn't survive slave restarts
is_in_group() is now independent of state of executed transaction.
- Reset thd->transaction.all.modified_non_trans_table() if we did set it for single table row events.
This was mainly for keeping the flag as documented.
- Changed slave_open_temp_tables to uint32 to be able to use atomic operators on it.
- Relay_log_info::sleep_lock -> rpl_group_info::sleep_lock
- Relay_log_info::sleep_cond -> rpl_group_info::sleep_cond
- Changed some functions to take rpl_group_info instead of Relay_log_info to make them multi-slave safe and to simplify usage
- do_shall_skip()
- continue_group()
- sql_slave_killed()
- next_event()
- Simplifed arguments to io_salve_killed(), check_io_slave_killed() and sql_slave_killed(); No reason to supply THD as this is part of the given structure.
- set_thd_in_use_temporary_tables() removed as in_use is set on usage
- Added information to thd_proc_info() which thread is waiting for slave mutex to exit.
- In open_table() reuse code from find_temporary_table()
Other things:
- More DBUG statements
- Fixed the rpl_incident.test can be run with --debug
- More comments
- Disabled not used function rpl_connect_master()
mysql-test/suite/perfschema/r/all_instances.result:
Moved sleep_lock and sleep_cond to rpl_group_info
mysql-test/suite/rpl/r/rpl_incident.result:
Updated result
mysql-test/suite/rpl/t/rpl_incident-master.opt:
Not needed anymore
mysql-test/suite/rpl/t/rpl_incident.test:
Fixed that test can be run with --debug
sql/handler.cc:
More DBUG_PRINT
sql/log.cc:
More comments
sql/log_event.cc:
Added DBUG statements
do_shall_skip(), continue_group() now takes rpl_group_info param
Use is_begin(), is_commit() and is_rollback() functions instead of inspecting query string
We don't have set slaves temporary tables 'in_use' as this is now done when tables are opened.
Removed IN_STMT flag setting. This is now done in update_state_of_relay_log()
Use IN_TRANSACTION flag to test state of relay log.
In rows_event_stmt_cleanup() reset thd->transaction.all.modified_non_trans_table if we had set this before.
sql/log_event.h:
do_shall_skip(), continue_group() now takes rpl_group_info param
Added is_part_of_group() to mark events that are part of the next event. This replaces setting IN_STMT when events are executed.
Added is_begin(), is_commit() and is_rollback() functions to Query_log_event to simplify code.
sql/log_event_old.cc:
Removed IN_STMT flag setting. This is now done in update_state_of_relay_log()
do_shall_skip(), continue_group() now takes rpl_group_info param
sql/log_event_old.h:
Added is_part_of_group() to mark events that are part of the next event.
do_shall_skip(), continue_group() now takes rpl_group_info param
sql/mysqld.cc:
Changed slave_open_temp_tables to uint32 to be able to use atomic operators on it.
Relay_log_info::sleep_lock -> Rpl_group_info::sleep_lock
Relay_log_info::sleep_cond -> Rpl_group_info::sleep_cond
sql/mysqld.h:
Updated types and names
sql/rpl_gtid.cc:
More DBUG
sql/rpl_parallel.cc:
Updated TODO section
Set thd for event that is execution
Use new is_begin(), is_commit() and is_rollback() functions.
More comments
sql/rpl_rli.cc:
sql_thd -> sql_driver_thd
Relay_log_info::sleep_lock -> rpl_group_info::sleep_lock
Relay_log_info::sleep_cond -> rpl_group_info::sleep_cond
Clear IN_STMT and IN_TRANSACTION in init_relay_log_pos() and Relay_log_info::cleanup_context() to ensure the flags doesn't survive slave restarts.
Reset table->in_use for temporary tables as the table may have been used by another THD.
Use IN_TRANSACTION instead of OPTION_BEGIN to check state of relay log.
Removed IN_STMT flag setting. This is now done in update_state_of_relay_log()
sql/rpl_rli.h:
Changed relay log state flags to bit masks instead of bit positions (most other code we have uses bit masks)
Added IN_TRANSACTION to mark if we are in a BEGIN ... COMMIT section.
save_temporary_tables is now thread safe
Relay_log_info::sleep_lock -> rpl_group_info::sleep_lock
Relay_log_info::sleep_cond -> rpl_group_info::sleep_cond
Relay_log_info->sql_thd renamed to Relay_log_info->sql_driver_thd to avoid wrong usage for merged code
is_in_group() is now independent of state of executed transaction.
sql/slave.cc:
Simplifed arguments to io_salve_killed(), sql_slave_killed() and check_io_slave_killed(); No reason to supply THD as this is part of the given structure.
set_thd_in_use_temporary_tables() removed as in_use is set on usage in sql_base.cc
sql_thd -> sql_driver_thd
More DBUG
Added update_state_of_relay_log() which will calculate the IN_STMT and IN_TRANSACTION state of the relay log after the current element is executed.
If slave_skip_counter is set run things in single threaded mode.
Simplifed arguments to io_salve_killed(), check_io_slave_killed() and sql_slave_killed(); No reason to supply THD as this is part of the given structure.
Added information to thd_proc_info() which thread is waiting for slave mutex to exit.
Disabled not used function rpl_connect_master()
Updated argument to next_event()
sql/sql_base.cc:
Added mutex around usage of slave's temporary tables. The active list is always kept up to date in sql->rgi_slave->save_temporary_tables.
Clear thd->temporary_tables after query (safety)
More DBUG
When using temporary table, set table->in_use to current thd as the THD may be different for slave threads.
Some code is ifdef:ed with REMOVE_AFTER_MERGE_WITH_10 as the given code in 10.0 is not yet in this tree.
In open_table() reuse code from find_temporary_table()
sql/sql_binlog.cc:
rli->sql_thd -> rli->sql_driver_thd
Remove duplicate setting of rgi->rli
sql/sql_class.cc:
Added helper functions rgi_lock_temporary_tables() and rgi_unlock_temporary_tables()
Would have been nicer to have these inline, but there was no easy way to do that
sql/sql_class.h:
Added functions to protect slaves temporary tables
sql/sql_parse.cc:
Added DBUG_PRINT
sql/transaction.cc:
Added comment
