The assert happens in 10.6 with the following command:
./mtr --no-reorder --verbose-restart main.update_ignore_216 main.upgrade_MDEV-19650 main.upgrade_MDEV-23102-1 main.upgrade_MDEV-23102-2 main.upgrade_geometrycolumn_procedure_definer main.upgrade_mdev_24363 main.varbinary sys_vars.aria_log_file_size_basic
Reviewer: Oleksandr Byelkin <sanja@mariadb.com>
If the connecting user doesn't have alter table privilege this isn't
allowed.
This patch removes enable / disable key commands that should never have been here
Closes#2002
srv_do_purge(): In commit edde1f6e0d
when the de-facto 32-bit trx_sys_t::history_size() was replaced with
32-bit trx_sys.rseg_history_len, some more variables were changed
from ulint (size_t) to uint32_t.
The history list length is the number of committed transactions whose
undo logs are waiting to be purged. Each TRX_RSEG_HISTORY list is
storing the number of entries in a 32-bit field and each transaction
will occupy at least one undo log page. It is thinkable that the
length of each TRX_RSEG_HISTORY list may approach the maximum
representable number. The number cannot be exceeded, because the
rollback segment header is allocated from the same tablespace as
the undo log header pages it is pointing to, and because the page
numbers of a tablespace are stored in 32 bits. In any case, it is
possible that the total number of unpurged committed transactions
cannot be represented in 32 but 39 bits (corresponding to
128 rollback segments and undo tablespaces).
- InnoDB fails to create a fts cache while loading the innodb fts
table which is stored in system tablespace. InnoDB should create
the fts cache while loading FTS_DOC_ID column from system column.
The counter srv_stats.key_rotation_list_length is never updated, and
therefore Innodb_encryption_key_rotation_list_length will always be 0.
The view INFORMATION_SCHEMA.INNODB_TABLESPACES_ENCRYPTION comes close
to reporting this information.
The counters were added in commit 5e55d1ced5
and any code to update them was
inadvertently removed in commit 2e814d4702
when applying InnoDB changes from MySQL 5.7.
Let us remove these counters that never reported anything useful. If such
statistics are really needed in a special case, they can be obtained by
instrumenting the code by some means, such as eBPF or a source code patch.
row_ins_sec_index_entry_low(): If a separate mini-transaction is
needed to adjust the minimum bounding rectangle (MBR) in the parent
page, we must disable redo logging if the table is a temporary table.
For temporary tables, no log is supposed to be written, because
the temporary tablespace will be reinitialized on server restart.
rtr_update_mbr_field(): Plug a memory leak.
lock_validate() accumulates page ids under locked lock_sys->mutex, then
releases the latch, and invokes lock_rec_block_validate() for each page.
Some other thread has ability to add/remove locks and change pages
between releasing the latch in lock_validate() and acquiring it in
lock_rec_validate_page().
lock_rec_validate_page() can invoke lock_rec_queue_validate() for
non-locked supremum, what can cause ut_ad(page_rec_is_leaf(rec)) failure
in lock_rec_queue_validate().
The fix is to invoke lock_rec_queue_validate() only for locked records
in lock_rec_validate_page().
The error message in lock_rec_block_validate() is not necessary as
BUF_GET_POSSIBLY_FREED mode is used to get block from buffer pool, and
this is not error if a block was evicted.
The test case would require new debug sync point. I think it's not
necessary as the fixed code is debug-only.
btr_insert_into_right_sibling(): Inherit any gap lock from the
left sibling to the right sibling before inserting the record
to the right sibling and updating the node pointer(s).
lock_update_node_pointer(): Update locks in case a node pointer
will move.
Based on mysql/mysql-server@c7d93c274f
buf_flush_page(): Never wait for a page latch, even in checkpoint
flushing (flush_type == BUF_FLUSH_LIST), to prevent a hang of the
page cleaner threads when a large number of pages is latched.
In mysql/mysql-server@9542f3015b
it was claimed that such a hang only affects CREATE FULLTEXT INDEX.
Their fix was to retain buffer-fix but release exclusive latch
on non-leaf pages, and subsequently write to those pages while
they are not associated with the mini-transaction, which would
trip a debug assertion in the MariaDB version of
mtr_t::memo_modify_page() and cause potential corruption
when using the default MariaDB setting innodb_log_optimize_ddl=OFF.
This change essentially backports a small part of
commit 7cffb5f6e8 (MDEV-23399)
from MariaDB Server 10.5.7.
Added checking for support of vfork by a platform where
building being done. Set HAVE_VFORK macros in case vfork()
system call is supported. Use vfork() system call if the
macros HAVE_VFORK is set, else use fork().
The only purpose of ibuf_bitmap_mutex is to prevent a deadlock between
two concurrent invocations of ibuf_update_free_bits_for_two_pages_low()
on the same pair of bitmap pages, but in opposite order.
The mutex is unnecessarily serializing the execution of the function
even when it is being invoked on totally different tablespaces.
To avoid deadlocks, it suffices to ensure that the two page latches
are being acquired in a deterministic (sorted) order.
The following condition has to added:
1) InnoDB fails to include the offset of the node pointer field
in non-leaf record for redundant row format.
2) If the Fixed length field does have only prefix length then
calculate the field maximum size as prefix length.
- Added the test case to test (2) and to check maximum number of
fields can exist in the index.
When we enable writes after Galera SST srv_n_fil_crypt_threads needs
to be set temporally to 0 (as was done when writes were disabled)
to make sure that encryption threads will be really started based
on old value of encryption threads.
Fix provided by Marko Mäkelä.
Starting with 10.3, an assertion would fail on the rollback of
a recovered incomplete transaction if a table definition violates
a FOREIGN KEY constraint.
DICT_ERR_IGNORE_RECOVER_LOCK: Include also DICT_ERR_IGNORE_FK_NOKEY
so that trx_resurrect_table_locks() will be able to load
table definitions and resurrect IX locks. Previously, if the
FOREIGN KEY constraints of a table were incomplete, the table
would fail to load until rollback, and in 10.3 or later an assertion
would fail that the rollback was not protected by a table IX lock.
Thanks to commit 9de2e60d74 there
will be no problems to enforce subsequent FOREIGN KEY operations
even though a table with invalid REFERENCES clause was loaded.
The issue was that the value of MARIA_FOUND_WRONG_KEY was a value
that could be returned by ha_key_cmp.
This was already fixed in MyISAM, now using the same fix in Aria:
Setting the value to INT_MAX32, which should be impossible in any
normal cases.
I also fixed so that if there is a wrong key, we now get a proper error
message and not an assert.
Creating a temporary table with Spider is non-sense because a Spider
table cannot hold any physical data and it requires an additional
effort to manage even if it is configured correctly.
Set HTON_TEMPORARY_NOT_SUPPORTED to spider_hton->flags.
Reviewed-by: nayuta.yanagisawa@hey.com
Co-authored-by: d8sk4ueun@gmail.com
The original query "SELECT IF(COUNT(a.`id`)>=0,'Y','N') FROM t" is
transformed to "SELECT COUNT(a.`id`), IF(ref >= 0, 'Y', 'N') FROM t",
where ref is Item_ref to "COUNT(a.`id`)", by split_sum_func().
Spider walks the item list twice, invoking spider_db_print_item_type().
The first invocation is in spider_create_group_by_handler() with
str == NULL. The second one is in spider_group_by_handler::init_scan()
with str != NULL.
spider_db_print_item_type() prints nothing at the first invocation,
and it prints item at the second invocation. However, at the second
invocation, the above mentioned ref to "COUNT(a.`id`)" points to
a field in a temporary table where the result will be stored. Thus,
to look behind the item_ref, Spider need to generate the query earlier.
A possible fix would be to generate a query to send in
spider_create_group_by_handler(). However, the fix requires a
considerable amount of changes of the Spider's GROUP BY handler.
I'd like to avoid that.
So, I fix the problem by not to use the GROUP BY handler when a
query contains Item_ref whose table_name, name, and alias_name_used
are not set.
This failure was caused by MDEV-25975, which removed the parameter
innodb_disallow_writes.
Added a check for wsrep_sst_disable_writes to the function
ibuf_merge_in_background().
We will remove the parameter innodb_disallow_writes because it is badly
designed and implemented. The parameter was never allowed at startup.
It was only internally used by Galera snapshot transfer.
If a user executed
SET GLOBAL innodb_disallow_writes=ON;
the server could hang even on subsequent read operations.
During Galera snapshot transfer, we will block writes
to implement an rsync friendly snapshot, as follows:
sst_flush_tables() will acquire a global lock by executing
FLUSH TABLES WITH READ LOCK, which will block any writes
at the high level.
sst_disable_innodb_writes(), invoked via ha_disable_internal_writes(true),
will suspend or disable InnoDB background tasks or threads that could
initiate writes. As part of this, log_make_checkpoint() will be invoked
to ensure that anything in the InnoDB buf_pool.flush_list will be written
to the data files. This has the nice side effect that the Galera joiner
will avoid crash recovery.
The changes to sql/wsrep.cc and to the tests are based on a prototype
that was developed by Jan Lindström.
Reviewed by: Jan Lindström
This was noticed as part of verifying
MDEV-28186 "crash on startup after crash while regular use"
but is probably not related to the users issue.
Still good to have it fixed
mariabackup does not load dictionary during backup, but it loads
tablespaces, that is why fil_system.max_assigned_id is not set with
dict_check_tablespaces_and_store_max_id(). There is no sense to issue the
warning during backup.
In commit 437da7bc54 (MDEV-19534),
the default value of the global variable srv_checksum_algorithm
in innochecksum was changed from SRV_CHECKSUM_ALGORITHM_INNODB
to implied 0 (innodb_checksum_algorithm=crc32). As a result,
the function buf_page_is_corrupted() would by default invoke
buf_calc_page_crc32() in innochecksum, and crc32_inited would hold.
This would cause "innochecksum" to fail on a particular page.
The actual problem is older, introduced in 2011 in
mysql/mysql-server@17e497bdb7
(MySQL 5.6.3). It should affect the validation of pages of old
data files that were written with innodb_checksum_algorithm=innodb.
When using innodb_checksum_algorithm=crc32 (the default setting
since MariaDB Server 10.2), some valid pages would be rejected
only because exactly one of the two checksum fields accidentally
matches the innodb_checksum_algorithm=crc32 value.
buf_page_is_corrupted(): Simplify the logic of non-strict
checksum validation, by always invoking buf_calc_page_crc32().
Remove a bogus condition that if only one of the checksum fields
contains the value returned by buf_calc_page_crc32(), the page
is corrupted.
