The replication relay log position was sometimes updated incorrectly at the
end of a transaction in parallel replication. This happened because the relay
log file name was taken from the current Relay_log_info (SQL driver thread),
not the correct value for the transaction in question.
The result was that if a transaction was applied while the SQL driver thread
was at least one relay log file ahead, _and_ the SQL thread was subsequently
stopped before applying any events from the most recent relay log file, then
the relay log position would be incorrect - wrong relay log file name. Thus,
when the slave was started again, usually a relay log read error would result,
or in rare cases, if the position happened to be readable, the slave might
even skip arbitrary amounts of events.
In GTID mode, the relay log position is reset when both slave threads are
restarted, so this bug would only be seen in non-GTID mode, or in GTID mode
when only the SQL thread, not the IO thread, was stopped.
Simply disallowing equality propagation into LIKE.
A more delicate fix is be possible, but it would need too many changes,
which is not desirable in 10.0 at this point.
MDEV-7106: Sporadic test failure in multi_source.gtid
MDEV-7153: Yet another sporadic failure of multi_source.gtid in buildbot
This patch fixes three races in the multi_source.gtid test case that could
cause sporadic failures:
1. Do not put SHOW ALL SLAVES STATUS in the output, the output is not stable.
2. Ensure that slave1 has replicated as far as expected, before stopping its
connection to master1 (otherwise the following wait will time out due to rows
not replicated from master1).
3. Ensure that slave2 has replicated far enough before connecting slave1 to it
(otherwise we get an error during connect that slave1 is ahead of slave2).
Moving Item_bool_func2 and Item_func_opt_neg from Item_int_func to
Item_bool_func. Now all functions that return is_bool_func()=true
have a common root class Item_bool_func.
This change is needed to fix MDEV-7149 properly.
Problem is on test it tried to verify that no files were left
on test database.
Fix: There's no need to list other file types, it can only
list *.par files
The bug was in DEBUG_SYNC. When waiting, debug_sync_execute() temporarily sets
thd->mysys_var->current_mutex to a new value while waiting. However, if the
old value of current_mutex was NULL, it was not restored, current_mutex
remained set to the temporary value (debug_sync_global.ds_mutex).
This made possible the following race: Thread T1 goes to KILL thread T2. In
THD::awake(), T1 loads T2->mysys_var->current_mutex, it is set to ds_mutex, T1
locks this mutex.
Now T2 runs, it does ENTER_COND, it sets T2->mysys_var->current_mutex to
LOCK_wait_commit (for example).
Then T1 resumes, it reloads mysys_var->current_mutex, now it is set to
LOCK_wait_commit, T1 unlocks this mutex instead of the ds_mutex that it locked
previously.
This causes safe_mutex to assert with the message: "Trying to unlock mutex
LOCK_wait_commit that wasn't locked".
The fix is to ensure that DEBUG_SYNC also will restore
mysys_var->current_mutex in the case where the original value was NULL.
I saw two test failures in rpl.rpl_gtid_crash where we get this in the error
log:
141123 12:47:54 [Note] InnoDB: Restoring possible half-written data pages
141123 12:47:54 [Note] InnoDB: from the doublewrite buffer...
InnoDB: Warning: database page corruption or a failed
InnoDB: file read of space 6 page 3.
InnoDB: Trying to recover it from the doublewrite buffer.
141123 12:47:54 [Note] InnoDB: Recovered the page from the doublewrite buffer.
This test case deliberately crashes the server, and if this crash happens
right in the middle of writing a buffer pool page to disk, it is not
unexpected that we can get a half-written page. The page is recovered
correctly from the doublewrite buffer.
So this patch adds a suppression for this warning in the error log for this
test case.
When a master slave restarts, it logs a special restart format description
event in its binlog. When the slave sees this event, it knows it needs to roll
back any active partial transaction, in case the master crashed previously in
the middle of writing such transaction to its binlog.
However, there was a bug where this rollback did not reset rgi->pending_gtid.
This caused the @@gtid_slave_pos to be updated incorrectly with the GTID of
the partial transaction that was rolled back.
Fix this by always clearing rgi->pending_gtid in cleanup_context(), hopefully
preventing similar bugs from turning up in other special cases where a
transaction is rolled back during replication.
Thanks to Pavel Ivanov for tracking down the issue and providing a test case.
after Operating system error number 36 in a file operation.
Analysis: os_file_get_status did not handle error ENAMETOOLONG
correctly.
Fix: Add correct handling for error ENAMETOOLONG. Note that on InnoDB
case the error is not passed all the way up to server. That would
be bigger rewamp.
innodb.innodb_stats_drop_locked fail and
innodb.innodb_stats_fetch_nonexistent fails in buildbot on Windows
Analysis: Problem is that innodb_stats_create_on_corrupted
test renames mysql.innodb.index_stats and all the rest
are dependend on this table.
Fix: After rename back to original, restart mysqld to
make sure that table is correct.
Use traditional statistics estimation by default (innodb-stats-traditional=true).
There could be performance regression for customers if there is a lot of
open table operations.
* adjust viossl.c to take account the new code
(SSL_get_error is used now, cannot simply remap it)
* remove unnecessary version check
* update the test to 10.0
This came with the upgrade from yassl 2.3.0 to 2.3.4 -
ssl tests started to hang on Windows. Comparing and removing changes
I've got to this:
void input_buffer::set_current(uint i)
{
- if (i)
- check(i - 1, size_);
- current_ = i;
+ if (error_ == 0 && i && check(i - 1, size_) == 0)
+ current_ = i;
+ else
+ error_ = -1;
}
in 2.3.0 i==0 was only used to avoid the check, in 2.3.4 it's an error.
but there are places in the code that do set_current(0) and others that
do, like, { before=get_current(); ...; set_current(before); } - and the
initial value of current_ is 0.
So, I suspect that set_current(0) should not be an error, but it should
only skip the check().
innodb_stats_sample_pages
Analysis: If you set the number of analyzed pages
to very low number compared to actual pages on
that table/index it randomly pics those pages
(default 8 pages), this leads to fact that query
after analyze table returns different results. If
the index tree is small, smaller than 10 *
n_sample_pages + total_external_size, then the
estimate is ok. For bigger index trees it is
common that we do not see any borders between
key values in the few pages we pick. But still
there may be n_sample_pages different key values,
or even more. And it just tries to
approximate to n_sample_pages (8).
Fix: (1) Introduced new dynamic configuration variable
innodb_stats_sample_traditional that retains
the current design. Default false.
(2) If traditional sample is not used we use
n_sample_pages = max(min(srv_stats_sample_pages,
index->stat_index_size),
log2(index->stat_index_size)*
srv_stats_sample_pages);
(3) Introduced new dynamic configuration variable
stat_modified_counter (default = 0) if set
sets lower bound for row updates when statistics is re-estimated.
If user has provided upper bound for how many rows needs to be updated
before we calculate new statistics we use minimum of provided value
and 1/16 of table every 16th round. If no upper bound is provided
(srv_stats_modified_counter = 0, default) then calculate new statistics
if 1 / 16 of table has been modified
since the last time a statistics batch was run.
We calculate statistics at most every 16th round, since we may have
a counter table which is very small and updated very often.
@param t table
@return true if the table has changed too much and stats need to be
recalculated
*/
#define DICT_TABLE_CHANGED_TOO_MUCH(t) \
((ib_int64_t) (t)->stat_modified_counter > (srv_stats_modified_counter ? \
ut_min(srv_stats_modified_counter, (16 + (t)->stat_n_rows / 16)) : \
16 + (t)->stat_n_rows / 16))
followup:
* explicitly disable SSLv2 and SSLv3, keep other protocols enabled
* fix a compiler warning
* rename the test and combinations to avoid confusion
vio/viossl.c:
fix a compiler warning
When the optimizer considers an option to use Loose Scan, it should
still consider UNIQUE keys (Previously, MDEV-4120 disabled loose scan
for all kinds of unique indexes. That was wrong)
However, we should not use Loose Scan when trying to satisfy
"SELECT DISTINCT col1, col2, .. colN"
when using an index defined as UNIQU(col1, col2, ... colN).
The bug was that full memory barrier was missing in the code that ensures that
a waiter on an InnoDB mutex will not go to sleep unless it is guaranteed to be
woken up again by another thread currently holding the mutex. This made
possible a race where a thread could get stuck waiting for a mutex that is in
fact no longer locked. If that thread was also holding other critical locks,
this could stall the entire server. There is an error monitor thread than can
break the stall, it runs about once per second. But if the error monitor
thread itself got stuck or was not running, then the entire server could hang
infinitely.
This was introduced on i386/amd64 platforms in 5.5.40 and 10.0.13 by an
incorrect patch that tried to fix the similar problem for PowerPC.
This commit reverts the incorrect PowerPC patch, and instead implements a fix
for PowerPC that does not change i386/amd64 behaviour, making PowerPC work
similarly to i386/amd64.
The problem is that the binlog position is updated before
Executed_log_entries and Slave_SQL_State. So, it's possible to hit
the moment when MASTER_POS_WAIT (and hence sync_with_master) already
returned success, but Slave_SQL_State and Executed_log_entries were not
modified yet.
Fixing it by adding a wait on the expected Executed_log_entries value.
in mysql_upgrade: do FLUSH PRIVILEGES at the end, not together with
mysql_fix_privilege_tables
mysql-test/t/mysql_upgrade-6984.opt:
use a dummy second option to force server restart after the test
* use the same HAVE_C/CXX_ variables for compiler flag tests as the rest of
the server and tokudb - to use cached results
* plugin's name should be "mroonga" not "ha_mroonga"
* don't use set_property(TARGET plugin_name ...), it aborts cmake when a plugin
id disabled, because the target doesn't exists in that case
result: mroonga can now be disabled from cmake command line
