Remove debug output,
remove overriding of the Windows C runtime flags(linker warning)
do not add code that depends on restsdk if library is not going
to be linked.
freaking Connect
For Visual Studio generator, use a per-config .def/.lib files with symbols
exported from mysqld.exe
Functions exported from mysqld.exe may differ between debug/optimized
compilation, e.g dbug functions are missing in release config.
After SST from master node (the one where event is ENABLED) - you will end up with the event enabled on two nodes, hence it's now being executed twice. It can be solved by comparing event's originator with server_id. if not equal, then change its status to 'SLAVESIDE_DISABLED'
Changes to be committed:
new file: mysql-test/suite/galera/r/galera_events2.result
new file: mysql-test/suite/galera/t/galera_events2.test
modified: sql/events.cc
Try to use more deterministic floating-point operations.
Apparently, 2.2 > 2.2 wrongly holds on many platforms, but
not ppc64le on the compiler used on Red Had Enterprise Linux 8.
The reason could be an infinite binary presentation:
2.2 = 0b10.001100110011…
With t1_f = 2.5 = 0b10.1, t1_f > 2.5 would no longer hold on AMD64.
Let us replace the 2.2 with 2.5 and compare t1_f >= 2.5 in order to
get more consistent results across all platforms.
The test fails because it reuses mysqltest perl code to copy directory
tree, and this code contains Windows-specific piece which outputs some
diagnostic information.
The patch introduces new parameter for that Windows-specific perl code to
have the ability to suppress diagnostic output on the corresponding
mysqltest perl module initialization.
Make the test stable: after DROP TABLE, make sure the compaction is
run and finishes.
If we don't do this, the post-drop compaction may run during the next
testcase. It will cause a record from the next testcase to be compacted
away when the test logic doesn't expect it and the test will fail
remove a special treatment of a bare DEFAULT keyword that made it
behave inconsistently and differently from DEFAULT(column).
Now all forms of the explicit assignment of a default column value
behave identically, and all count as an explicitly assigned value
(for the purpose of ON UPDATE NOW).
followup for c7c481f4d9
MDEV-5817 query cache bug (returning inconsistent/old result
set) with aria table parallel inserts, row format = page
The problem is that for transactional aria tables
(row_type=PAGE and transactional=1), maria_lock_database()
didn't flush the state or the query cache.
Not flushing the state is correct for transactional tables as
this is done by checkpoint, but not flushing the query cache
was wrong and could cause concurrent SELECT queries to not
be deleted from the cache.
Fixed by introducing a flush of the query cache as part of commit, if the table has changed.
t for transactional aria tables (row_type=PAGE and transactional=1), maria_lock_table() didn't flush their state or the query cache.
Backport the applicable part of Sergey Vojtovich's commit
0ca2ea1a65 from MariaDB Server 10.3.
trx reference counter was updated under mutex and read without any
protection. This is both slow and unsafe. Use atomic operations for
reference counter accesses.
MySQL 5.7.9 (and MariaDB 10.2.2) introduced a race condition
between InnoDB transaction commit and the conversion of implicit
locks into explicit ones.
The assertion failure can be triggered with a test that runs
3 concurrent single-statement transactions in a loop on a simple
table:
CREATE TABLE t (a INT PRIMARY KEY) ENGINE=InnoDB;
thread1: INSERT INTO t SET a=1;
thread2: DELETE FROM t;
thread3: SELECT * FROM t FOR UPDATE; -- or DELETE FROM t;
The failure scenarios are like the following:
(1) The INSERT statement is being committed, waiting for lock_sys->mutex.
(2) At the time of the failure, both the DELETE and SELECT transactions
are active but have not logged any changes yet.
(3) The transaction where the !other_lock assertion fails started
lock_rec_convert_impl_to_expl().
(4) After this point, the commit of the INSERT removed the transaction from
trx_sys->rw_trx_set, in trx_erase_lists().
(5) The other transaction consulted trx_sys->rw_trx_set and determined
that there is no implicit lock. Hence, it grabbed the lock.
(6) The !other_lock assertion fails in lock_rec_add_to_queue()
for the lock_rec_convert_impl_to_expl(), because the lock was 'stolen'.
This assertion failure looks genuine, because the INSERT transaction
is still active (trx->state=TRX_STATE_ACTIVE).
The problematic step (4) was introduced in
mysql/mysql-server@e27e0e0bb7
which fixed something related to MVCC (covered by the test
innodb.innodb-read-view). Basically, it reintroduced an error
that had been mentioned in an earlier commit
mysql/mysql-server@a17be6963f:
"The active transaction was removed from trx_sys->rw_trx_set prematurely."
Our fix goes along the following lines:
(a) Implicit locks will released by assigning
trx->state=TRX_STATE_COMMITTED_IN_MEMORY as the first step.
This transition will no longer be protected by lock_sys_t::mutex,
only by trx->mutex. This idea is by Sergey Vojtovich.
(b) We detach the transaction from trx_sys before starting to release
explicit locks.
(c) All callers of trx_rw_is_active() and trx_rw_is_active_low() must
recheck trx->state after acquiring trx->mutex.
(d) Before releasing any explicit locks, we will ensure that any activity
by other threads to convert implicit locks into explicit will have ceased,
by checking !trx_is_referenced(trx). There was a glitch
in this check when it was part of lock_trx_release_locks(); at the end
we would release trx->mutex and acquire lock_sys->mutex and trx->mutex,
and fail to recheck (trx_is_referenced() is protected by trx_t::mutex).
(e) Explicit locks can be released in batches (LOCK_RELEASE_INTERVAL=1000)
just like we did before.
trx_t::state: Document that the transition to COMMITTED is only
protected by trx_t::mutex, no longer by lock_sys_t::mutex.
trx_rw_is_active_low(), trx_rw_is_active(): Document that the transaction
state should be rechecked after acquiring trx_t::mutex.
trx_t::commit_state(): New function to change a transaction to committed
state, to release implicit locks.
trx_t::release_locks(): New function to release the explicit locks
after commit_state().
lock_trx_release_locks(): Move much of the logic to the caller
(which must invoke trx_t::commit_state() and trx_t::release_locks()
as needed), and assert that the transaction will have locks.
trx_get_trx_by_xid(): Make the parameter a pointer to const.
lock_rec_other_trx_holds_expl(): Recheck trx->state after acquiring
trx->mutex, and avoid a redundant lookup of the transaction.
lock_rec_queue_validate(): Recheck impl_trx->state while holding
impl_trx->mutex.
row_vers_impl_x_locked(), row_vers_impl_x_locked_low():
Document that the transaction state must be rechecked after
trx_mutex_enter().
trx_free_prepared(): Adjust for the changes to lock_trx_release_locks().
We were missing a test that would exercise trx_free_prepared()
with innodb_fast_shutdown=0. Add a test.
Note: if shutdown hangs due to the XA PREPARE transactions,
in MariaDB 10.2 the test would unfortunately pass, but take
2*60 seconds longer, because of two shutdown_server statements
timing out after 60 seconds. Starting with MariaDB 10.3, the
hung server would be killed with SIGABRT, and the test could
fail thanks to a backtrace message.
Three issues here:
* ON UPDATE DEFAULT NOW columns were updated after generated columns
were computed - this broke indexed virtual columns
* ON UPDATE DEFAULT NOW columns were updated after BEFORE triggers,
so triggers didn't see the correct NEW value
* in case of a multi-update generated columns were also updated
after BEFORE triggers
on UPDATE, compare_record() was comparing all columns that are marked
for writing. But generated columns that are written to the table are
always deterministic and cannot change unless normal non-generated
columns were changed. So it's enough to compare only non-generated
columns that were explicitly assigned values in the SET clause.
* remove one level of virtual functions
* remove redundant checks
* remove an if() as the value is always known at compilation time
don't pretend that "DEFAULT expr" and "ON UPDATE DEFAULT NOW"
are "basically the same thing"
This patch allows the server to open old tables that have
"bad" generated columns (i.e. indexed virtual generated columns,
persistent generated columns) that depend on sql_mode,
for general things like SELECT, INSERT, DROP, etc.
Warning are issued in such cases.
Only these commands are now disallowed and return an error:
- CREATE TABLE introducing a "bad" generated column
- ALTER TABLE introducing a "bad" generated column
- CREATE INDEX introdicing a "bad" generated column
(i.e. adding an index on a virtual generated column
that depends on sql_mode).
Note, these commands are allowed:
- ALTER TABLE removing a "bad" generate column
- ALTER TABLE removing an index from a "bad" virtual generated column
- DROP INDEX removing an index from a "bad" virtual generated column
but only if the table does not have any "bad" columns as a result.
This change takes into account a column's GENERATED ALWAYS AS
expression dependcy on sql_mode's PAD_CHAR_TO_FULL_LENGTH and
NO_UNSIGNED_SUBTRACTION flags.
Indexed virtual columns as well as persistent generated columns are
now not allowed to have such dependencies to avoid inconsistent data
or index files on sql_mode changes.
So an error is now returned in cases like this:
CREATE OR REPLACE TABLE t1
(
a CHAR(5),
v VARCHAR(5) AS (a) PERSISTENT -- CHAR->VARCHAR or CHAR->TEXT = ERROR
);
Functions RPAD() and RTRIM() can now remove dependency on
PAD_CHAR_TO_FULL_LENGTH. So this can be used instead:
CREATE OR REPLACE TABLE t1
(
a CHAR(5),
v VARCHAR(5) AS (RTRIM(a)) PERSISTENT
);
Note, unlike CHAR->VARCHAR and CHAR->TEXT this still works,
not RPAD(a) is needed:
CREATE OR REPLACE TABLE t1
(
a CHAR(5),
v CHAR(5) AS (a) PERSISTENT -- CHAR->CHAR is OK
);
More sql_mode flags may affect values of generated columns.
They will be addressed separately.
See comments in sql_mode.h for implementation details.
This allows one to run the test suite even if any of the following
options are changed:
- character-set-server
- collation-server
- join-cache-level
- log-basename
- max-allowed-packet
- optimizer-switch
- query-cache-size and query-cache-type
- skip-name-resolve
- table-definition-cache
- table-open-cache
- Some innodb options
etc
Changes:
- Don't print out the value of system variables as one can't depend on
them to being constants.
- Don't set global variables to 'default' as the default may not
be the same as the test was started with if there was an additional
option file. Instead save original value and reset it at end of test.
- Test that depends on the latin1 character set should include
default_charset.inc or set the character set to latin1
- Test that depends on the original optimizer switch, should include
default_optimizer_switch.inc
- Test that depends on the value of a specific system variable should
set it in the test (like optimizer_use_condition_selectivity)
- Split subselect3.test into subselect3.test and subselect3.inc to
make it easier to set and reset system variables.
- Added .opt files for test that required specfic options that could
be changed by external configuration files.
- Fixed result files in rockdsb & tokudb that had not been updated for
a while.
Merge the changes to include/index_merge*inc from the upstream. The changes
add this command in many places:
+if ($engine_type == RocksDB)
+{
+ set global rocksdb_force_flush_memtable_now=1;
+}
also add it in one more place to make the test truly stable.
Revert part of fa2a74e08d.
trx_reference(): Remove, and merge the relevant part to the only caller
trx_rw_is_active(). If the statements trx = NULL; were ever executed,
the function would have dereferenced a NULL pointer and crashed in
trx_mutex_exit(trx). Hence, those statements must have been unreachable,
and they can be replaced with debug assertions.
trx_rw_is_active(): Avoid unnecessary acquisition and release of trx->mutex
when do_ref_count=false.
lock_trx_release_locks(): Do not reset trx->id=0. Had the statement been
necessary, we would have experienced crashes in trx_reference().
Cherry picking:
Bug#25135304: RBR: WRONG FIELD LENGTH IN ERROR MESSAGE
commit 47bd3f7cf3c8518f62b1580ec65af2ba7ac13b95
Description:
============
In row based replication, when replicating from a table with a field with
character set set to UTF8mb3 to the same table with the same field set to
character set UTF8mb4 I get a confusing error message:
For VARCHAR: VARCHAR(1) 'utf8mb3' to VARCHAR(1) 'utf8mb4'
"Column 0 of table 'test.t1' cannot be converted from type 'varchar(3)' to
type 'varchar(1)'"
Similar issue with CHAR type as well.
Issue with respect to BLOB types:
For BLOB: LONGBLOB to TINYBLOB - Error message displays incorrect blob type.
"Column 0 of table 'test.t1' cannot be converted from type 'tinyblob' to type
'tinyblob'"
For BINARY to BINARY - Error message displays incorrect type for master side
field.
"Column 0 of table 'test.t' cannot be converted from type 'char(1)' to type
'binary(10)'"
Similar issue exists for VARBINARY type. It is displayed as 'VARCHAR'.
Analysis:
=========
In Row based replication charset information is not sent as part of metadata
from master to slave.
For VARCHAR field its character length is converted into equivalent
octets/bytes and stored internally. At the time of displaying the data to user
it is converted back to original character length.
For example:
VARCHAR(2)- utf8mb3 is stored as:2*3 = VARCHAR(6)
At the time of displaying it to user
VARCHAR(6)- charset utf8mb3:6/3= VARCHAR(2).
At present the internally converted octect length is sent from master to slave
with out providing the charset information. On slave side if the type
conversion fails 'show_sql_type' function is used to get the type specific
information from metadata. Since there is no charset information is available
the filed type is displayed as VARCHAR(6).
This results in confused error message.
For CHAR fields
CHAR(1)- utf8mb3 - CHAR(3)
CHAR(1)- utf8mb4 - CHAR(4)
'show_sql_type' function which retrieves type information from metadata uses
(bytes/local charset length) to get actual character length. If slave's chaset
is 'utf8mb4' then
CHAR(3/4)-->CHAR(0)
CHAR(4/4)-->CHAR(1).
This results in confused error message.
Analysis for BLOB type issue:
BLOB's length is represented in two forms.
1. Actual length
i.e
(length < 256) type= MYSQL_TYPE_TINY_BLOB;
(length < 65536) type= MYSQL_TYPE_BLOB; ...
2. packlength - The number of bytes used to represent the length of the blob
1- tinyblob
2- blob ...
In row based replication only the packlength is written in the binary log. On
the slave side this packlength is interpreted as actual length of the blob.
Hence the length is always < 256 and the type is displayed as tiny blob.
Analysis for BINARY to BINARY type issue:
The character set information is needed to identify a filed's type as char or
binary. Since master side character set information is not available on the
slave side both binary and char fields are displayed as char.
Fix:
===
For CHAR and VARCHAR fields display their length in octets for both source and
target fields. For target field display the charset information if it is
relevant.
For blob type changed the code to use the packlength and display appropriate
blob type in error message.
For binary and varbinary fields use the slave side character set as reference
to map them to binary or varbinary fields.
