- Filesort has an optmization where it reads only columns that are
needed before the sorting is done.
- When ref(_or_null) is picked by the join optimizer, it may remove parts
of WHERE clause that are guaranteed to be true.
- However, if we use quick select, we must put all of the range columns into the
read set. Not doing so will may cause us to fail to detect the end of the range.
- When range optimizer cannot the lookup value into [VAR]CHAR(n) column,
it should produce:
= "Impossible range" for equality
= "no range" for non-equalities.
"HAVING SUM(DISTINCT)": WRONG RESULTS.
ISSUE:
------
If a query uses loose index scan and it has both
AGG(DISTINCT) and MIN()/MAX()functions. Then, result values
of MIN/MAX() is set improperly.
When query has AGG(DISTINCT) then end_select is set to
end_send_group. "end_send_group" keeps doing aggregation
until it sees a record from next group. And, then it will
send out the result row of that group.
Since query also has MIN()/MAX() and loose index scan is
used, values of MIN/MAX() are set as part of loose index
scan itself. Setting MIN()/MAX() values as part of loose
index scan overwrites values computed in end_send_group.
This caused invalid result.
For such queries to work loose index scan should stop
performing MIN/MAX() aggregation. And, let end_send_group to
do the same. But according to current design loose index
scan can produce only one row per group key. If we have both
MIN() and MAX() then it has to give two records out. This is
not possible as interface has to use common buffer
record[0]! for both records at a time.
SOLUTIONS:
----------
For such queries to work we need a new interface for loose
index scan. Hence, do not choose loose_index_scan for such
cases. So a new rule SA7 is introduced to take care of the
same.
SA7: "If Q has both AGG_FUNC(DISTINCT ...) and
MIN/MAX() functions then loose index scan access
method is not used."
mysql-test/r/group_min_max.result:
Expected result.
mysql-test/t/group_min_max.test:
1. Test with various combination of AGG(DISTINCT) and
MIN(), MAX() functions.
2. Corrected the plan for old queries.
sql/opt_range.cc:
A new rule SA7 is introduced.
"HAVING SUM(DISTINCT)": WRONG RESULTS.
ISSUE:
------
If a query uses loose index scan and it has both
AGG(DISTINCT) and MIN()/MAX()functions. Then, result values
of MIN/MAX() is set improperly.
When query has AGG(DISTINCT) then end_select is set to
end_send_group. "end_send_group" keeps doing aggregation
until it sees a record from next group. And, then it will
send out the result row of that group.
Since query also has MIN()/MAX() and loose index scan is
used, values of MIN/MAX() are set as part of loose index
scan itself. Setting MIN()/MAX() values as part of loose
index scan overwrites values computed in end_send_group.
This caused invalid result.
For such queries to work loose index scan should stop
performing MIN/MAX() aggregation. And, let end_send_group to
do the same. But according to current design loose index
scan can produce only one row per group key. If we have both
MIN() and MAX() then it has to give two records out. This is
not possible as interface has to use common buffer
record[0]! for both records at a time.
SOLUTIONS:
----------
For such queries to work we need a new interface for loose
index scan. Hence, do not choose loose_index_scan for such
cases. So a new rule SA7 is introduced to take care of the
same.
SA7: "If Q has both AGG_FUNC(DISTINCT ...) and
MIN/MAX() functions then loose index scan access
method is not used."
Problem:
If there is a predicate on a column referenced by MIN/MAX and
that predicate is not present in all the disjunctions on
keyparts earlier in the compound index, Loose Index Scan will
not return correct result.
Analysis:
When loose index scan is chosen, range optimizer currently
groups all the predicates that contain group parts separately
and minmax parts separately. It therefore applies all the
conditions on the group parts first to the fetched row.
Then in the call to next_max, it processes the conditions
which have min/max keypart.
For ex in the following query:
Select f1, max(f2) from t1 where (f1 = 10 and f2 = 13) or
(f1 = 3) group by f1;
Condition (f2 = 13) would be applied even for rows that
satisfy (f1 = 3) thereby giving wrong results.
Solution:
Do not choose loose_index_scan for such cases. So a new rule
WA2 is introduced to take care of the same.
WA2: "If there are predicates on C, these predicates must
be in conjuction to all predicates on all earlier keyparts
in I."
Todo the same, fix reuses the function get_constant_key_infix().
Since this funciton will fail for all multi-range conditions, it
is re-written to recognize that if the sub-conditions are
equivalent across the disjuncts: it will now succeed.
And to achieve this a new helper function is introduced called
all_same().
The fix also moves the test of NGA3 up to the former only
caller, get_constant_key_infix().
mysql-test/r/group_min_max_innodb.result:
Added test result change for Bug#17909656
mysql-test/t/group_min_max_innodb.test:
Added test cases for Bug#17909656
sql/opt_range.cc:
Introduced Rule WA2 because of Bug#17909656
Problem:
If there is a predicate on a column referenced by MIN/MAX and
that predicate is not present in all the disjunctions on
keyparts earlier in the compound index, Loose Index Scan will
not return correct result.
Analysis:
When loose index scan is chosen, range optimizer currently
groups all the predicates that contain group parts separately
and minmax parts separately. It therefore applies all the
conditions on the group parts first to the fetched row.
Then in the call to next_max, it processes the conditions
which have min/max keypart.
For ex in the following query:
Select f1, max(f2) from t1 where (f1 = 10 and f2 = 13) or
(f1 = 3) group by f1;
Condition (f2 = 13) would be applied even for rows that
satisfy (f1 = 3) thereby giving wrong results.
Solution:
Do not choose loose_index_scan for such cases. So a new rule
WA2 is introduced to take care of the same.
WA2: "If there are predicates on C, these predicates must
be in conjuction to all predicates on all earlier keyparts
in I."
Todo the same, fix reuses the function get_constant_key_infix().
Since this funciton will fail for all multi-range conditions, it
is re-written to recognize that if the sub-conditions are
equivalent across the disjuncts: it will now succeed.
And to achieve this a new helper function is introduced called
all_same().
The fix also moves the test of NGA3 up to the former only
caller, get_constant_key_infix().
MDEV-5980: EITS: if condition is used for REF access, its selectivity is still in filtered%
MDEV-5985: EITS: selectivity estimates look illogical for join and non-key equalities
MDEV-6003: EITS: ref access, keypart2=const vs keypart2=expr - inconsistent filtered% value
- Made a number of fixes in table_cond_selectivity() so that it returns
correct selectivity estimates.
- Added comments in related code.
Better comments
MDEV-5985: EITS: selectivity estimates look illogical for join and non-key equalities
MDEV-6003: EITS: ref access, keypart2=const vs keypart2=expr - inconsistent filtered% value
- Made a number of fixes in table_cond_selectivity() so that it returns
correct selectivity estimates.
- Added comments in related code.
Back-ported from the mysql 5.6 code line the patch with
the following comment:
Fix for Bug#11757108 CHANGE IN EXECUTION PLAN FOR COUNT_DISTINCT_GROUP_ON_KEY
CAUSES PEFORMANCE REGRESSION
The cause for the performance regression is that the access strategy for the
GROUP BY query is changed form using "index scan" in mysql-5.1 to use "loose
index scan" in mysql-5.5. The index used for group by is unique and thus each
"loose scan" group will only contain one record. Since loose scan needs to
re-position on each "loose scan" group this query will do a re-position for
each index entry. Compared to just reading the next index entry as a normal
index scan does, the use of loose scan for this query becomes more expensive.
The cause for selecting to use loose scan for this query is that in the current
code when the size of the "loose scan" group is one, the formula for
calculating the cost estimates becomes almost identical to the cost of using
normal index scan. Differences in use of integer versus floating point arithmetic
can cause one or the other access strategy to be selected.
The main issue with the formula for estimating the cost of using loose scan is
that it does not take into account that it is more costly to do a re-position
for each "loose scan" group compared to just reading the next index entry.
Both index scan and loose scan estimates the cpu cost as:
"number of entries needed too read/scan" * ROW_EVALUATE_COST
The results from testing with the query in this bug indicates that the real
cost for doing re-position four to eight times higher than just reading the
next index entry. Thus, the cpu cost estimate for loose scan should be increased.
To account for the extra work to re-position in the index we increase the
cost for loose index scan to include the cost of navigating the index.
This is modelled as a function of the height of the b-tree:
navigation cost= ceil(log(records in table)/log(indexes per block))
* ROWID_COMPARE_COST;
This will avoid loose index scan being used for indexes where the "loose scan"
group contains very few index entries.
MDEV-5984: EITS: Incorrect filtered% value for single-table select with range access
- Fix calculate_cond_selectivity_for_table() to work correctly with range accesses
over multi-component keys:
= First, take selectivity of all possible range scans into account. Remember which
fields were used bt the range scans.
= Then, calculate selectivity produced by sargable predicates on fields. If a
field was used in a possible range access, assume its selectivity is already
taken into account.
- Fix table_cond_selectivity(): when quick select is used, selectivity of
COND(table) is taken into account in matching_candidates_in_table(). In
table_cond_selectivity() we should not apply it for the second time.
After constant table row substitution the where condition may be converted
to always true. The function calculate_cond_selectivity_for_table() should
take into account this possibility.
MDEV-4556 Server crashes in SEL_ARG::rb_insert with index_merge+index_merge_sort_union, FORCE INDEX
- merge_same_index_scans() may put the same SEL_ARG tree in multiple result plans.
make it call incr_refs() on the SEL_ARG trees that it does key_or() on, because
key_or(sel_arg_tree_1, sel_arg_tree_2) call may invalidate SEL_ARG trees pointed
by sel_arg_tree_1 and sel_arg_tree_2.
This is port of fix for MySQL BUG#17647863.
revno: 5572
revision-id: jon.hauglid@oracle.com-20131030232243-b0pw98oy72uka2sj
committer: Jon Olav Hauglid <jon.hauglid@oracle.com>
timestamp: Thu 2013-10-31 00:22:43 +0100
message:
Bug#17647863: MYSQL DOES NOT COMPILE ON OSX 10.9 GM
Rename test() macro to MY_TEST() to avoid conflict with libc++.
The function calculate_cond_selectivity_for_table() must consider
the case when the key range tree returned by the call of get_mm_tree()
is of the type SEL_TREE::ALWAYS.
Port to mariadb-1.0 the following fix from mysql-5.6:
Revision ID: jorgen.loland@oracle.com-20120314131055-ml54x9deueqfsff4
BUG#13701206: WHERE A>=B DOES NOT GIVE SAME EXECUTION PLAN
AS WHERE B<=A (RANGE OPTIMIZER)
that fix didn't have a public testcase, so I created one.
- Added MALLOC_LIBRARY variable to hold name of malloc library
- Back ported valgrind related fixes from jemalloc 3.4.1 to the included jemalloc 3.3.1
- Renamed bitmap_init() and bitmap_free() to my_bitmap_init() and my_bitmap_free() to avoid clash with jemalloc 3.4.1
- Use option --soname-synonyms=somalloc=NON to valgrind when using jemalloc
- Show version related variables in mysqld --help
-- Added SHOW_VALUE_IN_HELP marker
Increased back_log to 150 as the original value was a bit too small
CMakeLists.txt:
Added MALLOC_LIBRARY variable to hold name of malloc library
cmake/jemalloc.cmake:
Added MALLOC_LIBRARY variable to hold name of malloc library
config.h.cmake:
Added MALLOC_LIBRARY variable to hold name of malloc library
extra/jemalloc/ChangeLog:
Updates changelog
extra/jemalloc/include/jemalloc/internal/arena.h:
Backported valgrind fixes from jemalloc 3.4.1
extra/jemalloc/include/jemalloc/internal/jemalloc_internal.h.in:
Backported valgrind fixes from jemalloc 3.4.1
extra/jemalloc/include/jemalloc/internal/private_namespace.h:
Backported valgrind fixes from jemalloc 3.4.1
extra/jemalloc/include/jemalloc/internal/tcache.h:
Backported valgrind fixes from jemalloc 3.4.1
extra/jemalloc/src/arena.c:
Backported valgrind fixes from jemalloc 3.4.1
include/my_bitmap.h:
Renamed bitmap_init() and bitmap_free() to my_bitmap_init() and my_bitmap_free() to avoid clash with jemalloc 3.4.1
mysql-test/mysql-test-run.pl:
Use option --soname-synonyms=somalloc=NON to valgrind when using jemalloc
mysql-test/valgrind.supp:
Supression of memory leak in OpenSuse 12.3
mysys/my_bitmap.c:
Renamed bitmap_init() and bitmap_free() to my_bitmap_init() and my_bitmap_free()
sql/ha_ndbcluster_binlog.cc:
Renames
sql/ha_ndbcluster_cond.h:
Renames
sql/ha_partition.cc:
Renames
sql/handler.cc:
Renames
sql/item_subselect.cc:
Renames
sql/log_event.cc:
Renames
sql/log_event_old.cc:
Renames
sql/mysqld.cc:
Renames
Show version related variables in mysqld --help
sql/opt_range.cc:
Renames
sql/opt_table_elimination.cc:
Renames
sql/partition_info.cc:
Renames
sql/rpl_injector.h:
Renames
sql/set_var.h:
Renames
sql/slave.cc:
Renames
sql/sql_bitmap.h:
Renames
sql/sql_insert.cc:
Renames
sql/sql_lex.h:
Renames
sql/sql_parse.cc:
Renames
sql/sql_partition.cc:
Renames
sql/sql_select.cc:
Renames
sql/sql_show.cc:
Renames
sql/sql_update.cc:
Renames
sql/sys_vars.cc:
Show version related variables in mysqld --help
sql/sys_vars.h:
Added SHOW_VALUE_IN_HELP marker for variables that should be shown in --help
sql/table.cc:
Renames
sql/table.h:
Removed not used bitmap_init_value
storage/connect/ha_connect.cc:
Removed compiler warning
storage/maria/ma_open.c:
Renames
unittest/mysys/bitmap-t.c:
Renames
- Query plan footprint (in new terms, "EXPLAIN structure") should always keep
a copy of key_name. This is because the table might be a temporary table which
may be already freed by the time we use query plan footprint.
- Make QPF structures store data members, not strings.
This is not fully possible, because table names (and hence
key names, etc) can be deleted, and we have to store strings.
For queries like
update t1 set ... where <unique key> order by ... limit ...
we need to handle the fact that unique keys allow NULL
values, and hence can return more than one row.
sql/opt_range.cc:
When the unique key has multiple key parts,
check each key_part for nullability, rather than the first key part.
(s/key->part ==/key_tree->part ==/)
Also: revert the if() test, for better readability.
For queries like
update t1 set ... where <unique key> order by ... limit ...
we need to handle the fact that unique keys allow NULL
values, and hence can return more than one row.
Currently the loose scan code in opt_range.cc considers all indexes as
possible for the access method. Due to inexact statistics it may happen
that a loose scan is selected over a unique index.
This is clearly wrong since a "loose scan" over a unique index will read
the same keys as a direct index scan, but the loose scan has more overhead.
This task adds a rule to skip unique indexes for loose scan.
Added forgotten partition_explicit_prune from mysql-5.6.
Backported the fix for
Bug#13559657: PARTITION SELECTION DOES NOT WORK WITH VIEWS
from mysql-5.6
includes:
* remove some remnants of "Bug#14521864: MYSQL 5.1 TO 5.5 BUGS PARTITIONING"
* introduce LOCK_share, now LOCK_ha_data is strictly for engines
* rea_create_table() always creates .par file (even in "frm-only" mode)
* fix a 5.6 bug, temp file leak on dummy ALTER TABLE
In the case of loose scan used as input for order by, end_send()
didn't detect correctly that a loose scan was used, and didn't copy
the non-aggregated fields from the temp table used for ORDER BY.
The fix uses the fact that the quick select used for sorting is
attached to JOIN::pre_sort_join_tab instead of JOIN::join_tab.
- merge_same_index_scans() may put the same SEL_ARG tree in multiple result plans.
make it call incr_refs() on the SEL_ARG trees that it does key_or() on, because
key_or(sel_arg_tree_1, sel_arg_tree_2) call may invalidate SEL_ARG trees pointed
by sel_arg_tree_1 and sel_arg_tree_2.
-Added test and extra code to ensure we don't leave keyread on for a handler table.
-Create on disk temporary files always with long data pointers if SQL_SMALL_RESULT is not used. This ensures that we can handle temporary files bigger than 4G.
mysql-test/include/default_mysqld.cnf:
Run test suite with smaller aria keybuffer size
mysql-test/suite/maria/maria3.result:
Run test suite with smaller aria keybuffer size
mysql-test/suite/sys_vars/r/aria_pagecache_buffer_size_basic.result:
Run test suite with smaller aria keybuffer size
sql/handler.cc:
Disable key read (extra safety if something went wrong)
sql/multi_range_read.cc:
Ensure we have don't leave keyread on for secondary_file
sql/opt_range.cc:
Simplify code with mark_columns_used_by_index_no_reset()
Ensure that read_keys_and_merge() disableds keyread if it enables it
sql/opt_subselect.cc:
Remove not anymore used argument for create_internal_tmp_table()
sql/sql_derived.cc:
Remove not anymore used argument for create_internal_tmp_table()
sql/sql_select.cc:
Use 'enable_keyread()' instead of calling HA_EXTRA_RESET. (Makes debugging easier)
Create on disk temporary files always with long data pointers if SQL_SMALL_RESULT is not used. This ensures that we can handle temporary files bigger than 4G.
Remove not anymore used argument for create_internal_tmp_table()
More DBUG
sql/sql_select.h:
Remove not anymore used argument for create_internal_tmp_table()
get_mm_leaf function can store all sorts of spatial features in
one type of field it receives from an Item_field.
So we just allow that by setting the type of this field to GEOMETRY.
per-file comments:
mysql-test/r/gis-rtree.result
result updated
mysql-test/t/gis-rtree.test
test case added.
sql/opt_range.cc
set geom_type=GEOMETRY if we got Field_geom.
Solaris fixes:
- Fixed that wait_timeout_func and wait_timeout tests works on solaris
- We have to compile without NO_ALARM on Solaris as Solaris doesn't support timeouts on sockets with setsockopt(.. SO_RCVTIMEO).
- Fixed that compile-solaris-amd64-debug works (before that we got a wrong ELF class: ELFCLASS64 on linkage)
- Added missing sync_with_master
Other bug fixes:
- Free memory for rpl_global_gtid_binlog_state before exit() to avoid 'accessing uninitalized mutex' error.
BUILD/FINISH.sh:
Fixed issues on Solaris with ksh
BUILD/compile-solaris-amd64-debug:
Added missing -m64 flag
configure.cmake:
We have to compile without NO_ALARM on Solaris as Solaris doesn't support timeouts on sockets with setsockopt(.. SO_RCVTIMEO)
mysql-test/suite/rpl/t/rpl_gtid_mdev4473.test:
- Added missing sync_with_master (fix by knielsen)
sql-common/client.c:
Added () to get rid of compiler warning
sql/item_strfunc.cc:
Fixed compiler warning
sql/log.cc:
Free memory for static variable rpl_global_gtid_binlog_state before exit()
- If we are compiling with safemalloc, we would try to call sf_free() for some members after sf_terminate() was called, which would result of trying to access the uninitalized mutex 'sf_mutex'
sql/multi_range_read.cc:
Fixed compiler warnings of converting double to ulong.
sql/opt_range.cc:
Fixed compiler warnings of converting double to ulong or uint
- Better to have all variables that can be number of rows as 'ha_rows'
sql/rpl_gtid.cc:
Added rpl_binlog_state::free() to be able to free memory for static objects before exit()
sql/rpl_gtid.h:
Added rpl_binlog_state::free() to be able to free memory for static objects before exit()
sql/set_var.cc:
Fixed compiler warning
sql/sql_join_cache.cc:
Fixed compiler warnings of converting double to uint
sql/sql_show.cc:
Added cast to get rid of compiler warning
sql/sql_statistics.cc:
Remove code that didn't do anything.
(store_record() with record[0] is a no-op)
storage/xtradb/os/os0file.c:
Added __attribute__ ((unused))
support-files/compiler_warnings.supp:
Ignore warnings from atomic_add_64_nv
(was not able to fix this with a cast as the macro is a bit different between systems)
vio/viosocket.c:
Added more DBUG_PRINT
GROUP BY, MYISAM
Problem:-
In a query, where we are using loose index scan optimization and
we have MIN() causes segmentation fault(where table row length
is less then key_length).
Analysis:
While using loose index scan for MIN(), we call key_copy(), to copy
the key data from record.
This function is using temporary record buffer to store key data
from the record buffer.But in case where the key length is greater
then the buffer length, this will cause a segmentation fault.
Solution:
Give a proper buffer to store a key record.
sql/opt_range.cc:
We can't use record buffer to store key data.So, give a proper buffer to store a key record.
GROUP BY, MYISAM
Problem:-
In a query, where we are using loose index scan optimization and
we have MIN() causes segmentation fault(where table row length
is less then key_length).
Analysis:
While using loose index scan for MIN(), we call key_copy(), to copy
the key data from record.
This function is using temporary record buffer to store key data
from the record buffer.But in case where the key length is greater
then the buffer length, this will cause a segmentation fault.
Solution:
Give a proper buffer to store a key record.
PARTIAL INDEX
Consider the following table definition:
CREATE TABLE t (
my_col CHAR(10),
...
INDEX my_idx (my_col(1))
)
The my_idx index is not able to distinguish between rows with
equal first-character my_col-values (e.g. "f", "foo", "fee").
Prior to this CS, the range optimizer would translate
"WHERE my_col NOT IN ('f', 'h')" into (optimizer trace syntax)
"ranges": [
"NULL < my_col < f",
"f < my_col"
]
But this was not correct because the rows with values "foo"
and "fee" would not belong to any of those ranges. However, the
predicate "my_col != 'f' AND my_col != 'h'" would translate
to
"ranges": [
"NULL < my_col"
]
because get_mm_leaf() changes from "<" to "<=" for partial
keyparts. This CS changes the range optimizer implementation
for NOT IN to behave like a conjunction of NOT EQUAL: it
replaces "<" with "<=" for all but the first range when the
keypart is partial.
PARTIAL INDEX
Consider the following table definition:
CREATE TABLE t (
my_col CHAR(10),
...
INDEX my_idx (my_col(1))
)
The my_idx index is not able to distinguish between rows with
equal first-character my_col-values (e.g. "f", "foo", "fee").
Prior to this CS, the range optimizer would translate
"WHERE my_col NOT IN ('f', 'h')" into (optimizer trace syntax)
"ranges": [
"NULL < my_col < f",
"f < my_col"
]
But this was not correct because the rows with values "foo"
and "fee" would not belong to any of those ranges. However, the
predicate "my_col != 'f' AND my_col != 'h'" would translate
to
"ranges": [
"NULL < my_col"
]
because get_mm_leaf() changes from "<" to "<=" for partial
keyparts. This CS changes the range optimizer implementation
for NOT IN to behave like a conjunction of NOT EQUAL: it
replaces "<" with "<=" for all but the first range when the
keypart is partial.
When calculating the selectivity of a range in the function
get_column_range_cardinality a check whether NULL values are
included into into the range must be done.
currently get_mm_tree skipped the evaluation of this constant
and icorrectly proceeded. The correct behavior is to return a
NULL subtree, according to the IF branch being fixed - when it
evaluates the constant it returns a value, and doesn't continue
further.
When performing the range analysis for a conjunction the function
calculate_cond_selectivity_for_table should take in to account that
the analysis of some conjuncts may return SEL_ARG::IMPOSSIBLE.
- Let index_merge allocate table handlers on quick select's MEM_ROOT,
not on statement's MEM_ROOT.
This is crucial for big "range checked for each record" queries, where
index_merge can be created and deleted many times during query exection.
We should not make O(#rows) allocations on statement's MEM_ROOT.
The range optimizer uses 'save_in_field_no_warnings()' to verify properties of
'value <cmp> field' expressions.
If this execution yields an error, it should abort.
The range optimizer uses 'save_in_field_no_warnings()' to verify properties of
'value <cmp> field' expressions.
If this execution yields an error, it should abort.
Analysis:
Range analysis detects that the subquery is expensive and doesn't
build a range access method. Later, the applicability test for loose
scan doesn't take that into account, and builds a loose scan method
without a range scan on the min/max column. As a result loose scan
fetches the first key in each group, rather than the first key that
satisfies the condition on the min/max column.
Solution:
Since there is no SEL_ARG tree to be used for the min/max column,
it is not possible to use loose scan if the min/max column is compared
with an expensive scalar subquery. Make the test for loose scan
applicability to be in sync with the range analysis code by testing if
the min/max argument is compared with an expensive predicate.
Analys:
The cause for the wrong result was that the optimizer
incorrectly chose min/max loose scan when it is not
applicable. The applicability test missed the case when
a condition on the MIN/MAX argument was OR-ed with a
condition on some other field. In this case, the MIN/MAX
condition cannot be used for loose scan.
Solution:
Extend the test check_group_min_max_predicates() to check
that the WHERE clause is of the form: "cond1 AND cond2"
where
cond1 - does not use min_max_column at all.
cond2 - is an AND/OR tree with leaves in form "min_max_column $CMP$ const"
or $CMP$ is one of the functions between, is [not] null
Analysis:
Range analysis discoveres that the query can be executed via loose index scan for GROUP BY.
Later, GROUP BY analysis fails to confirm that the GROUP operation can be computed via an
index because there is no logic to handle duplicate field references in the GROUP clause.
As a result the optimizer produces an inconsistent plan. It constructs a temporary table,
but on the other hand the group fields are not set to point there.
Solution:
Make loose scan analysis work in sync with order by analysis. In the case of duplicate
columns loose scan will not be applicable. This limitation will be lifted in 10.0 by
removing duplicate columns.
ON COL WITH COMPOSITE INDEX
This problem is caused by the patch for the bug#11751794.
While checking for the keypart covering non grouping attribute. we are not
checking whether the root node of the SEL_ARG* tree for the index have any
cvalue or not.
sql/opt_range.cc:
check whether the keeypart_tree has any range tree.
ON COL WITH COMPOSITE INDEX
This problem is caused by the patch for the bug#11751794.
While checking for the keypart covering non grouping attribute. we are not
checking whether the root node of the SEL_ARG* tree for the index have any
cvalue or not.
ON COL WITH COMPOSITE INDEX
This problem is caused by the patch for the bug#11751794.
While checking for the keypart covering non grouping attribute. we are not
checking whether the root node of the SEL_ARG* tree for the index have any
cvalue or not.
ON COL WITH COMPOSITE INDEX
This problem is caused by the patch for the bug#11751794.
While checking for the keypart covering non grouping attribute. we are not
checking whether the root node of the SEL_ARG* tree for the index have any
cvalue or not.
from MariaDB 10.0.
The bug in mdev-3948 was an instance of the problem fixed by Sergey's patch
in 10.0 - namely that the range optimizer could change table->[read | write]_set,
and not restore it.
revno: 3471
committer: Sergey Petrunya <psergey@askmonty.org>
branch nick: 10.0-serg-fix-imerge
timestamp: Sat 2012-11-03 12:24:36 +0400
message:
# MDEV-3817: Wrong result with index_merge+index_merge_intersection, InnoDB table, join, AND and OR conditions
Reconcile the fixes from:
#
# guilhem.bichot@oracle.com-20110805143029-ywrzuz15uzgontr0
# Fix for BUG#12698916 - "JOIN QUERY GIVES WRONG RESULT AT 2ND EXEC. OR
# AFTER FLUSH TABLES [-INT VS NULL]"
#
# guilhem.bichot@oracle.com-20111209150650-tzx3ldzxe1yfwji6
# Fix for BUG#12912171 - ASSERTION FAILED: QUICK->HEAD->READ_SET == SAVE_READ_SET
# and
#
and related fixes from: BUG#1006164, MDEV-376:
Now, ROR-merged QUICK_RANGE_SELECT objects make no assumptions about the values
of table->read_set and table->write_set.
Each QUICK_ROR_SELECT has (and had before) its own column bitmap, but now, all
QUICK_ROR_SELECT's functions that care: reset(), init_ror_merged_scan(), and
get_next() will set table->read_set when invoked and restore it back to what
it was before the call before they return.
This allows to avoid the mess when somebody else modifies table->read_set for
some reason.
Base code and idea from a patch from by plinux at Taobao.
The idea is that we mark all memory that are thread specific with MY_THREAD_SPECIFIC.
Memory counting is done per thread in the my_malloc_size_cb_func callback function from my_malloc().
There are plenty of new asserts to ensure that for a debug server the counting is correct.
Information_schema.processlist gets two new columns: MEMORY_USED and EXAMINED_ROWS.
- The later is there mainly to show how query is progressing.
The following changes in interfaces was needed to get this to work:
- init_alloc_root() amd init_sql_alloc() has extra option so that one can mark memory with MY_THREAD_SPECIFIC
- One now have to use alloc_root_set_min_malloc() to set min memory to be allocated by alloc_root()
- my_init_dynamic_array() has extra option so that one can mark memory with MY_THREAD_SPECIFIC
- my_net_init() has extra option so that one can mark memory with MY_THREAD_SPECIFIC
- Added flag for hash_init() so that one can mark hash table to be thread specific.
- Added flags to init_tree() so that one can mark tree to be thread specific.
- Removed with_delete option to init_tree(). Now one should instead use MY_TREE_WITH_DELETE_FLAG.
- Added flag to Warning_info::Warning_info() if the structure should be fully initialized.
- String elements can now be marked as thread specific.
- Internal HEAP tables are now marking it's memory as MY_THREAD_SPECIFIC.
- Changed type of myf from int to ulong, as this is always a set of bit flags.
Other things:
- Removed calls to net_end() and thd->cleanup() as these are now done in ~THD()
- We now also show EXAMINED_ROWS in SHOW PROCESSLIST
- Added new variable 'memory_used'
- Fixed bug where kill_threads_for_user() was using the wrong mem_root to allocate memory.
- Removed calls to the obsoleted function init_dynamic_array()
- Use set_current_thd() instead of my_pthread_setspecific_ptr(THR_THD,...)
client/completion_hash.cc:
Updated call to init_alloc_root()
client/mysql.cc:
Updated call to init_alloc_root()
client/mysqlbinlog.cc:
init_dynamic_array() -> my_init_dynamic_array()
Updated call to init_alloc_root()
client/mysqlcheck.c:
Updated call to my_init_dynamic_array()
client/mysqldump.c:
Updated call to init_alloc_root()
client/mysqltest.cc:
Updated call to init_alloc_root()
Updated call to my_init_dynamic_array()
Fixed compiler warnings
extra/comp_err.c:
Updated call to my_init_dynamic_array()
extra/resolve_stack_dump.c:
Updated call to my_init_dynamic_array()
include/hash.h:
Added HASH_THREAD_SPECIFIC
include/heap.h:
Added flag is internal temporary table.
include/my_dir.h:
Safety fix: Ensure that MY_DONT_SORT and MY_WANT_STAT don't interfer with other mysys flags
include/my_global.h:
Changed type of myf from int to ulong, as this is always a set of bit flags.
include/my_sys.h:
Added MY_THREAD_SPECIFIC and MY_THREAD_MOVE
Added malloc_flags to DYNAMIC_ARRAY
Added extra mysys flag argument to my_init_dynamic_array()
Removed deprecated functions init_dynamic_array() and my_init_dynamic_array.._ci
Updated paramaters for init_alloc_root()
include/my_tree.h:
Added my_flags to allow one to use MY_THREAD_SPECIFIC with hash tables.
Removed with_delete. One should now instead use MY_TREE_WITH_DELETE_FLAG
Updated parameters to init_tree()
include/myisamchk.h:
Added malloc_flags to allow one to use MY_THREAD_SPECIFIC for checks.
include/mysql.h:
Added MYSQL_THREAD_SPECIFIC_MALLOC
Used 'unused1' to mark memory as thread specific.
include/mysql.h.pp:
Updated file
include/mysql_com.h:
Used 'unused1' to mark memory as thread specific.
Updated parameters for my_net_init()
libmysql/libmysql.c:
Updated call to init_alloc_root() to mark memory thread specific.
libmysqld/emb_qcache.cc:
Updated call to init_alloc_root()
libmysqld/lib_sql.cc:
Updated call to init_alloc_root()
mysql-test/r/create.result:
Updated results
mysql-test/r/user_var.result:
Updated results
mysql-test/suite/funcs_1/datadict/processlist_priv.inc:
Update to handle new format of SHOW PROCESSLIST
mysql-test/suite/funcs_1/datadict/processlist_val.inc:
Update to handle new format of SHOW PROCESSLIST
mysql-test/suite/funcs_1/r/is_columns_is.result:
Update to handle new format of SHOW PROCESSLIST
mysql-test/suite/funcs_1/r/processlist_priv_no_prot.result:
Updated results
mysql-test/suite/funcs_1/r/processlist_val_no_prot.result:
Updated results
mysql-test/t/show_explain.test:
Fixed usage of debug variable so that one can run test with --debug
mysql-test/t/user_var.test:
Added test of memory_usage variable.
mysys/array.c:
Added extra my_flags option to init_dynamic_array() and init_dynamic_array2() so that one can mark memory with MY_THREAD_SPECIFIC
All allocated memory is marked with the given my_flags.
Removed obsolete function init_dynamic_array()
mysys/default.c:
Updated call to init_alloc_root()
Updated call to my_init_dynamic_array()
mysys/hash.c:
Updated call to my_init_dynamic_array_ci().
Allocated memory is marked with MY_THREAD_SPECIFIC if HASH_THREAD_SPECIFIC is used.
mysys/ma_dyncol.c:
init_dynamic_array() -> my_init_dynamic_array()
Added #if to get rid of compiler warnings
mysys/mf_tempdir.c:
Updated call to my_init_dynamic_array()
mysys/my_alloc.c:
Added extra parameter to init_alloc_root() so that one can mark memory with MY_THREAD_SPECIFIC
Extend MEM_ROOT with a flag if memory is thread specific.
This is stored in block_size, to keep the size of the MEM_ROOT object identical as before.
Allocated memory is marked with MY_THREAD_SPECIFIC if used with init_alloc_root()
mysys/my_chmod.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_chsize.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_copy.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_create.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_delete.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_error.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_fopen.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_fstream.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_getwd.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_lib.c:
Updated call to init_alloc_root()
Updated call to my_init_dynamic_array()
Updated DBUG_PRINT because of change of myf type
mysys/my_lock.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_malloc.c:
Store at start of each allocated memory block the size of the block and if the block is thread specific.
Call malloc_size_cb_func, if set, with the memory allocated/freed.
Updated DBUG_PRINT because of change of myf type
mysys/my_open.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_pread.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_read.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_redel.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_rename.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_seek.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_sync.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_thr_init.c:
Ensure that one can call my_thread_dbug_id() even if thread is not properly initialized.
mysys/my_write.c:
Updated DBUG_PRINT because of change of myf type
mysys/mysys_priv.h:
Updated parameters to sf_malloc and sf_realloc()
mysys/safemalloc.c:
Added checking that for memory marked with MY_THREAD_SPECIFIC that it's the same thread that is allocation and freeing the memory.
Added sf_malloc_dbug_id() to allow MariaDB to specify which THD is handling the memory.
Added my_flags arguments to sf_malloc() and sf_realloc() to be able to mark memory with MY_THREAD_SPECIFIC.
Added sf_report_leaked_memory() to get list of memory not freed by a thread.
mysys/tree.c:
Added flags to init_tree() so that one can mark tree to be thread specific.
Removed with_delete option to init_tree(). Now one should instead use MY_TREE_WITH_DELETE_FLAG.
Updated call to init_alloc_root()
All allocated memory is marked with the given malloc flags
mysys/waiting_threads.c:
Updated call to my_init_dynamic_array()
sql-common/client.c:
Updated call to init_alloc_root() and my_net_init() to mark memory thread specific.
Updated call to my_init_dynamic_array().
Added MYSQL_THREAD_SPECIFIC_MALLOC so that client can mark memory as MY_THREAD_SPECIFIC.
sql-common/client_plugin.c:
Updated call to init_alloc_root()
sql/debug_sync.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/event_scheduler.cc:
Removed calls to net_end() as this is now done in ~THD()
Call set_current_thd() to ensure that memory is assigned to right thread.
sql/events.cc:
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/filesort.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/filesort_utils.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/ha_ndbcluster.cc:
Updated call to init_alloc_root()
Updated call to my_net_init()
Removed calls to net_end() and thd->cleanup() as these are now done in ~THD()
sql/ha_ndbcluster_binlog.cc:
Updated call to my_net_init()
Updated call to init_sql_alloc()
Removed calls to net_end() and thd->cleanup() as these are now done in ~THD()
sql/ha_partition.cc:
Updated call to init_alloc_root()
sql/handler.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
Added missing call to my_dir_end()
sql/item_func.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/item_subselect.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/item_sum.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/log.cc:
More DBUG
Updated call to init_alloc_root()
sql/mdl.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/mysqld.cc:
Added total_memory_used
Updated call to init_alloc_root()
Move mysql_cond_broadcast() before my_thread_end()
Added mariadb_dbug_id() to count memory per THD instead of per thread.
Added my_malloc_size_cb_func() callback function for my_malloc() to count memory.
Move initialization of mysqld_server_started and mysqld_server_initialized earlier.
Updated call to my_init_dynamic_array().
Updated call to my_net_init().
Call my_pthread_setspecific_ptr(THR_THD,...) to ensure that memory is assigned to right thread.
Added status variable 'memory_used'.
Updated call to init_alloc_root()
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/mysqld.h:
Added set_current_thd()
sql/net_serv.cc:
Added new parameter to my_net_init() so that one can mark memory with MY_THREAD_SPECIFIC.
Store in net->thread_specific_malloc if memory is thread specific.
Mark memory to be thread specific if requested.
sql/opt_range.cc:
Updated call to my_init_dynamic_array()
Updated call to init_sql_alloc()
Added MY_THREAD_SPECIFIC to allocated memory.
sql/opt_subselect.cc:
Updated call to init_sql_alloc() to mark memory thread specific.
sql/protocol.cc:
Fixed compiler warning
sql/records.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/rpl_filter.cc:
Updated call to my_init_dynamic_array()
sql/rpl_handler.cc:
Updated call to my_init_dynamic_array2()
sql/rpl_handler.h:
Updated call to init_sql_alloc()
sql/rpl_mi.cc:
Updated call to my_init_dynamic_array()
sql/rpl_tblmap.cc:
Updated call to init_alloc_root()
sql/rpl_utility.cc:
Updated call to my_init_dynamic_array()
sql/slave.cc:
Initialize things properly before calling functions that allocate memory.
Removed calls to net_end() as this is now done in ~THD()
sql/sp_head.cc:
Updated call to init_sql_alloc()
Updated call to my_init_dynamic_array()
Added parameter to warning_info() that it should be fully initialized.
sql/sp_pcontext.cc:
Updated call to my_init_dynamic_array()
sql/sql_acl.cc:
Updated call to init_sql_alloc()
Updated call to my_init_dynamic_array()
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/sql_admin.cc:
Added parameter to warning_info() that it should be fully initialized.
sql/sql_analyse.h:
Updated call to init_tree() to mark memory thread specific.
sql/sql_array.h:
Updated call to my_init_dynamic_array() to mark memory thread specific.
sql/sql_audit.cc:
Updated call to my_init_dynamic_array()
sql/sql_base.cc:
Updated call to init_sql_alloc()
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/sql_cache.cc:
Updated comment
sql/sql_class.cc:
Added parameter to warning_info() that not initialize it until THD is fully created.
Updated call to init_sql_alloc()
Mark THD::user_vars has to be thread specific.
Updated call to my_init_dynamic_array()
Ensure that memory allocated by THD is assigned to the THD.
More DBUG
Always acll net_end() in ~THD()
Assert that all memory signed to this THD is really deleted at ~THD.
Fixed set_status_var_init() to not reset memory_used.
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/sql_class.h:
Added MY_THREAD_SPECIFIC to allocated memory.
Added malloc_size to THD to record allocated memory per THD.
sql/sql_delete.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/sql_error.cc:
Added 'initialize' parameter to Warning_info() to say if should allocate memory for it's structures.
This is used by THD::THD() to not allocate memory until THD is ready.
Added Warning_info::free_memory()
sql/sql_error.h:
Updated Warning_info() class.
sql/sql_handler.cc:
Updated call to init_alloc_root() to mark memory thread specific.
sql/sql_insert.cc:
More DBUG
sql/sql_join_cache.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/sql_lex.cc:
Updated call to my_init_dynamic_array()
sql/sql_lex.h:
Updated call to my_init_dynamic_array()
sql/sql_load.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/sql_parse.cc:
Removed calls to net_end() and thd->cleanup() as these are now done in ~THD()
Ensure that examined_row_count() is reset before query.
Fixed bug where kill_threads_for_user() was using the wrong mem_root to allocate memory.
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
Don't restore thd->status_var.memory_used when restoring thd->status_var
sql/sql_plugin.cc:
Updated call to init_alloc_root()
Updated call to my_init_dynamic_array()
Don't allocate THD on the stack, as this causes problems with valgrind when doing thd memory counting.
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/sql_prepare.cc:
Added parameter to warning_info() that it should be fully initialized.
Updated call to init_sql_alloc() to mark memory thread specific.
sql/sql_reload.cc:
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/sql_select.cc:
Updated call to my_init_dynamic_array() and init_sql_alloc() to mark memory thread specific.
Added MY_THREAD_SPECIFIC to allocated memory.
More DBUG
sql/sql_servers.cc:
Updated call to init_sql_alloc() to mark memory some memory thread specific.
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/sql_show.cc:
Updated call to my_init_dynamic_array()
Mark my_dir() memory thread specific.
Use my_pthread_setspecific_ptr(THR_THD,...) to mark that allocated memory should be allocated to calling thread.
More DBUG.
Added malloc_size and examined_row_count to SHOW PROCESSLIST.
Added MY_THREAD_SPECIFIC to allocated memory.
Updated call to init_sql_alloc()
Added parameter to warning_info() that it should be fully initialized.
sql/sql_statistics.cc:
Fixed compiler warning
sql/sql_string.cc:
String elements can now be marked as thread specific.
sql/sql_string.h:
String elements can now be marked as thread specific.
sql/sql_table.cc:
Updated call to init_sql_alloc() and my_malloc() to mark memory thread specific
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
Fixed compiler warning
sql/sql_test.cc:
Updated call to my_init_dynamic_array() to mark memory thread specific.
sql/sql_trigger.cc:
Updated call to init_sql_alloc()
sql/sql_udf.cc:
Updated call to init_sql_alloc()
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/sql_update.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/table.cc:
Updated call to init_sql_alloc().
Mark memory used by temporary tables, that are not for slave threads, as MY_THREAD_SPECIFIC
Updated call to init_sql_alloc()
sql/thr_malloc.cc:
Added my_flags argument to init_sql_alloc() to be able to mark memory as MY_THREAD_SPECIFIC.
sql/thr_malloc.h:
Updated prototype for init_sql_alloc()
sql/tztime.cc:
Updated call to init_sql_alloc()
Updated call to init_alloc_root() to mark memory thread specific.
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/uniques.cc:
Updated calls to init_tree(), my_init_dynamic_array() and my_malloc() to mark memory thread specific.
sql/unireg.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
storage/csv/ha_tina.cc:
Updated call to init_alloc_root()
storage/federated/ha_federated.cc:
Updated call to init_alloc_root()
Updated call to my_init_dynamic_array()
Ensure that memory allocated by fedarated is registered for the system, not for the thread.
storage/federatedx/federatedx_io_mysql.cc:
Updated call to my_init_dynamic_array()
storage/federatedx/ha_federatedx.cc:
Updated call to init_alloc_root()
Updated call to my_init_dynamic_array()
storage/heap/ha_heap.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
storage/heap/heapdef.h:
Added parameter to hp_get_new_block() to be able to do thread specific memory tagging.
storage/heap/hp_block.c:
Added parameter to hp_get_new_block() to be able to do thread specific memory tagging.
storage/heap/hp_create.c:
- Internal HEAP tables are now marking it's memory as MY_THREAD_SPECIFIC.
- Use MY_TREE_WITH_DELETE instead of removed option 'with_delete'.
storage/heap/hp_open.c:
Internal HEAP tables are now marking it's memory as MY_THREAD_SPECIFIC.
storage/heap/hp_write.c:
Added new parameter to hp_get_new_block()
storage/maria/ma_bitmap.c:
Updated call to my_init_dynamic_array()
storage/maria/ma_blockrec.c:
Updated call to my_init_dynamic_array()
storage/maria/ma_check.c:
Updated call to init_alloc_root()
storage/maria/ma_ft_boolean_search.c:
Updated calls to init_tree() and init_alloc_root()
storage/maria/ma_ft_nlq_search.c:
Updated call to init_tree()
storage/maria/ma_ft_parser.c:
Updated call to init_tree()
Updated call to init_alloc_root()
storage/maria/ma_loghandler.c:
Updated call to my_init_dynamic_array()
storage/maria/ma_open.c:
Updated call to my_init_dynamic_array()
storage/maria/ma_sort.c:
Updated call to my_init_dynamic_array()
storage/maria/ma_write.c:
Updated calls to my_init_dynamic_array() and init_tree()
storage/maria/maria_pack.c:
Updated call to init_tree()
storage/maria/unittest/sequence_storage.c:
Updated call to my_init_dynamic_array()
storage/myisam/ft_boolean_search.c:
Updated call to init_tree()
Updated call to init_alloc_root()
storage/myisam/ft_nlq_search.c:
Updated call to init_tree()
storage/myisam/ft_parser.c:
Updated call to init_tree()
Updated call to init_alloc_root()
storage/myisam/ft_stopwords.c:
Updated call to init_tree()
storage/myisam/mi_check.c:
Updated call to init_alloc_root()
storage/myisam/mi_write.c:
Updated call to my_init_dynamic_array()
Updated call to init_tree()
storage/myisam/myisamlog.c:
Updated call to init_tree()
storage/myisam/myisampack.c:
Updated call to init_tree()
storage/myisam/sort.c:
Updated call to my_init_dynamic_array()
storage/myisammrg/ha_myisammrg.cc:
Updated call to init_sql_alloc()
storage/perfschema/pfs_check.cc:
Rest current_thd
storage/perfschema/pfs_instr.cc:
Removed DBUG_ENTER/DBUG_VOID_RETURN as at this point my_thread_var is not allocated anymore, which can cause problems.
support-files/compiler_warnings.supp:
Disable compiler warning from offsetof macro.
Consider the following query:
SELECT f_1,..,f_m, AGGREGATE_FN(C)
FROM t1
WHERE ...
GROUP BY ...
Loose index scan ("Using index for group-by") can be used for
this query if there is an index 'i' covering all fields in the
select list, and the GROUP BY clause makes up a prefix f1,...,fn
of 'i'. Furthermore, according to rule NGA2 of
get_best_group_min_max(), the WHERE clause must contain a
conjunction of equality predicates for all fields fn+1,...,fm.
The problem in this bug was that a query with WHERE clause that
broke NGA2(NGA: Non Group Attribuite) was not detected and therefore
used loose index scan.
This lead to wrong result. The query had an index
covering (c1,c2) and had:
"WHERE (c1 = 1 AND c2 = 'a') OR (c1 = 2 AND c2 = 'b')
GROUP BY c1"
or
"WHERE (c1 = 1 ) OR (c1 = 2 AND c2 = 'b')
GROUP BY c1"
This WHERE clause cannot be transformed to a conjunction of
equality predicates.
The solution is to introduce another rule, NGA3, that complements
NGA2. NGA3 says that if a gap field (field between those
listed in GROUP BY and C in the index) has a predicate, then
there can only be one range in the query. This requirement is
more strict than it has to be in theory. BUG 15947433 will deal
with that.
sql/opt_range.cc:
check for the repetition of non group field.
Consider the following query:
SELECT f_1,..,f_m, AGGREGATE_FN(C)
FROM t1
WHERE ...
GROUP BY ...
Loose index scan ("Using index for group-by") can be used for
this query if there is an index 'i' covering all fields in the
select list, and the GROUP BY clause makes up a prefix f1,...,fn
of 'i'. Furthermore, according to rule NGA2 of
get_best_group_min_max(), the WHERE clause must contain a
conjunction of equality predicates for all fields fn+1,...,fm.
The problem in this bug was that a query with WHERE clause that
broke NGA2(NGA: Non Group Attribuite) was not detected and therefore
used loose index scan.
This lead to wrong result. The query had an index
covering (c1,c2) and had:
"WHERE (c1 = 1 AND c2 = 'a') OR (c1 = 2 AND c2 = 'b')
GROUP BY c1"
or
"WHERE (c1 = 1 ) OR (c1 = 2 AND c2 = 'b')
GROUP BY c1"
This WHERE clause cannot be transformed to a conjunction of
equality predicates.
The solution is to introduce another rule, NGA3, that complements
NGA2. NGA3 says that if a gap field (field between those
listed in GROUP BY and C in the index) has a predicate, then
there can only be one range in the query. This requirement is
more strict than it has to be in theory. BUG 15947433 will deal
with that.
Consider the following query:
SELECT f_1,..,f_m, AGGREGATE_FN(C)
FROM t1
WHERE ...
GROUP BY ...
Loose index scan ("Using index for group-by") can be used for
this query if there is an index 'i' covering all fields in the
select list, and the GROUP BY clause makes up a prefix f1,...,fn
of 'i'. Furthermore, according to rule NGA2 of
get_best_group_min_max(), the WHERE clause must contain a
conjunction of equality predicates for all fields fn+1,...,fm.
The problem in this bug was that a query with WHERE clause that
broke NGA2 was not detected and therefore used loose index scan.
This lead to wrong result. The query had an index
covering (c1,c2) and had:
"WHERE (c1 = 1 AND c2 = 'a') OR (c1 = 2 AND c2 = 'b')
GROUP BY c1"
or
"WHERE (c1 = 1 ) OR (c1 = 2 AND c2 = 'b')
GROUP BY c1"
This WHERE clause cannot be transformed to a conjunction of
equality predicates.
The solution is to introduce another rule, NGA3, that complements
NGA2. NGA3 says that if a gap field (field between those
listed in GROUP BY and C in the index) has a predicate, then
there can only be one range in the query. This requirement is
more strict than it has to be in theory. BUG 15947433 will deal
with that.
sql/opt_range.cc:
check for the repetition of non group field.
Consider the following query:
SELECT f_1,..,f_m, AGGREGATE_FN(C)
FROM t1
WHERE ...
GROUP BY ...
Loose index scan ("Using index for group-by") can be used for
this query if there is an index 'i' covering all fields in the
select list, and the GROUP BY clause makes up a prefix f1,...,fn
of 'i'. Furthermore, according to rule NGA2 of
get_best_group_min_max(), the WHERE clause must contain a
conjunction of equality predicates for all fields fn+1,...,fm.
The problem in this bug was that a query with WHERE clause that
broke NGA2 was not detected and therefore used loose index scan.
This lead to wrong result. The query had an index
covering (c1,c2) and had:
"WHERE (c1 = 1 AND c2 = 'a') OR (c1 = 2 AND c2 = 'b')
GROUP BY c1"
or
"WHERE (c1 = 1 ) OR (c1 = 2 AND c2 = 'b')
GROUP BY c1"
This WHERE clause cannot be transformed to a conjunction of
equality predicates.
The solution is to introduce another rule, NGA3, that complements
NGA2. NGA3 says that if a gap field (field between those
listed in GROUP BY and C in the index) has a predicate, then
there can only be one range in the query. This requirement is
more strict than it has to be in theory. BUG 15947433 will deal
with that.
Problem:
During the index intersect access method, the SQL layer will access one row,
that satisfies a set of conditions, using an index i1. And then it will try to
access the same row, with other set of conditions using the next index i2. If
the fetch from i2 fails (we are talking about an error situation here and not
simply an unmatched row situation), then it will unlock the row accessed via
i1. This will work in all situations except deadlock error.
When a deadlock happens, InnoDB will rollback the transaction. InnoDB intimates
the SQL layer about this through the THD::transaction_rollback_request member.
But this is not currently used by the SQL layer.
Solution:
When an error happens, the SQL layer must check the
THD::transaction_rollback_request member, before calling handler::unlock_row().
We have also added a debug assert in ha_innobase::unlock_row() checking that
it must be called only when the transaction is in active state.
rb#1773 approved by Marko and Sunny.
Problem:
During the index intersect access method, the SQL layer will access one row,
that satisfies a set of conditions, using an index i1. And then it will try to
access the same row, with other set of conditions using the next index i2. If
the fetch from i2 fails (we are talking about an error situation here and not
simply an unmatched row situation), then it will unlock the row accessed via
i1. This will work in all situations except deadlock error.
When a deadlock happens, InnoDB will rollback the transaction. InnoDB intimates
the SQL layer about this through the THD::transaction_rollback_request member.
But this is not currently used by the SQL layer.
Solution:
When an error happens, the SQL layer must check the
THD::transaction_rollback_request member, before calling handler::unlock_row().
We have also added a debug assert in ha_innobase::unlock_row() checking that
it must be called only when the transaction is in active state.
rb#1773 approved by Marko and Sunny.
The problem is a shift operation that is not 64-bit safe.
The consequence is that used tables information for a join with 32 tables
or more will be incorrect.
Fixed by adding a type cast in Item_sum::update_used_tables().
Also used the opportunity to fix some other potential bugs by adding an
explicit type-cast to an integer in a left-shift operation.
Some of them were quite harmless, but was fixed in order to get the same
signed-ness as the other operand of the operation it was used in.
sql/item_cmpfunc.cc
Adjusted signed-ness for some integers in left-shift.
sql/item_subselect.cc
Added type-cast to nesting_map (which is a 32/64 bit type, so
potential bug for deeply nested queries).
sql/item_sum.cc
Added type-cast to nesting_map (32/64-bit type) and table_map
(64-bit type).
sql/opt_range.cc
Added type-cast to ulonglong (which is a 64-bit type).
sql/sql_base.cc
Added type-cast to nesting_map (which is a 32/64-bit type).
sql/sql_select.cc
Added type-cast to nesting_map (32/64-bit type) and key_part_map
(64-bit type).
sql/strfunc.cc
Changed type-cast from longlong to ulonglong, to preserve signed-ness.
The problem is a shift operation that is not 64-bit safe.
The consequence is that used tables information for a join with 32 tables
or more will be incorrect.
Fixed by adding a type cast in Item_sum::update_used_tables().
Also used the opportunity to fix some other potential bugs by adding an
explicit type-cast to an integer in a left-shift operation.
Some of them were quite harmless, but was fixed in order to get the same
signed-ness as the other operand of the operation it was used in.
sql/item_cmpfunc.cc
Adjusted signed-ness for some integers in left-shift.
sql/item_subselect.cc
Added type-cast to nesting_map (which is a 32/64 bit type, so
potential bug for deeply nested queries).
sql/item_sum.cc
Added type-cast to nesting_map (32/64-bit type) and table_map
(64-bit type).
sql/opt_range.cc
Added type-cast to ulonglong (which is a 64-bit type).
sql/sql_base.cc
Added type-cast to nesting_map (which is a 32/64-bit type).
sql/sql_select.cc
Added type-cast to nesting_map (32/64-bit type) and key_part_map
(64-bit type).
sql/strfunc.cc
Changed type-cast from longlong to ulonglong, to preserve signed-ness.
that introduced engine independent persistent statistics.
In particular:
- added an enumeration type for possible values of the system
variable use_stat_tables
- renamed KEY::real_rec_per_key to KEY::actual_rec_per_key
- optimized the collection of statistical data for any primary
key defined only on one column.
MDEV-567: Wrong result from a query with correlated subquery if ICP is allowed:
backport the fix developed for SHOW EXPLAIN:
revision-id: psergey@askmonty.org-20120719115219-212cxmm6qvf0wlrb
branch nick: 5.5-show-explain-r21
timestamp: Thu 2012-07-19 15:52:19 +0400
BUG#992942 & MDEV-325: Pre-liminary commit for testing
and adjust it so that it handles DS-MRR scans correctly.
Reconcile the fixes from:
#
# guilhem.bichot@oracle.com-20110805143029-ywrzuz15uzgontr0
# Fix for BUG#12698916 - "JOIN QUERY GIVES WRONG RESULT AT 2ND EXEC. OR
# AFTER FLUSH TABLES [-INT VS NULL]"
#
# guilhem.bichot@oracle.com-20111209150650-tzx3ldzxe1yfwji6
# Fix for BUG#12912171 - ASSERTION FAILED: QUICK->HEAD->READ_SET == SAVE_READ_SET
# and
#
and related fixes from: BUG#1006164, MDEV-376:
Now, ROR-merged QUICK_RANGE_SELECT objects make no assumptions about the values
of table->read_set and table->write_set.
Each QUICK_ROR_SELECT has (and had before) its own column bitmap, but now, all
QUICK_ROR_SELECT's functions that care: reset(), init_ror_merged_scan(), and
get_next() will set table->read_set when invoked and restore it back to what
it was before the call before they return.
This allows to avoid the mess when somebody else modifies table->read_set for
some reason.
When a DML statement is issued, and if the index merge
access method is chosen, then many rows from the
storage engine will be locked because of the way the
algorithm works. Many rows will be locked, but they
will not be part of the final result set.
To reduce the excessive locking, the locks of unmatched
rows are released by this patch. This patch will
affect only transactions with isolation level
equal to or less stricter than READ COMMITTED. This is
because of the behaviour of ha_innobase::unlock_row().
rb://1296 approved by jorgen and olav.
When a DML statement is issued, and if the index merge
access method is chosen, then many rows from the
storage engine will be locked because of the way the
algorithm works. Many rows will be locked, but they
will not be part of the final result set.
To reduce the excessive locking, the locks of unmatched
rows are released by this patch. This patch will
affect only transactions with isolation level
equal to or less stricter than READ COMMITTED. This is
because of the behaviour of ha_innobase::unlock_row().
rb://1296 approved by jorgen and olav.
CONSISTENT SNAPSHOT OPTION
A transaction is started with a consistent snapshot. After
the transaction is started new indexes are added to the
table. Now when we issue an update statement, the optimizer
chooses an index. When the index scan is being initialized
via ha_innobase::change_active_index(), InnoDB reports
the error code HA_ERR_TABLE_DEF_CHANGED, with message
stating that "insufficient history for index".
This error message is propagated up to the SQL layer. But
the my_error() api is never called. The statement level
diagnostics area is not updated with the correct error
status (it remains in Diagnostics_area::DA_EMPTY).
Hence the following check in the Protocol::end_statement()
fails.
516 case Diagnostics_area::DA_EMPTY:
517 default:
518 DBUG_ASSERT(0);
519 error= send_ok(thd->server_status, 0, 0, 0, NULL);
520 break;
The fix is to backport the fix of bugs 14365043, 11761652
and 11746399.
14365043 PROTOCOL::END_STATEMENT(): ASSERTION `0' FAILED
11761652 HA_RND_INIT() RESULT CODE NOT CHECKED
11746399 RETURN VALUES OF HA_INDEX_INIT() AND INDEX_INIT() IGNORED
rb://1227 approved by guilhem and mattiasj.
CONSISTENT SNAPSHOT OPTION
A transaction is started with a consistent snapshot. After
the transaction is started new indexes are added to the
table. Now when we issue an update statement, the optimizer
chooses an index. When the index scan is being initialized
via ha_innobase::change_active_index(), InnoDB reports
the error code HA_ERR_TABLE_DEF_CHANGED, with message
stating that "insufficient history for index".
This error message is propagated up to the SQL layer. But
the my_error() api is never called. The statement level
diagnostics area is not updated with the correct error
status (it remains in Diagnostics_area::DA_EMPTY).
Hence the following check in the Protocol::end_statement()
fails.
516 case Diagnostics_area::DA_EMPTY:
517 default:
518 DBUG_ASSERT(0);
519 error= send_ok(thd->server_status, 0, 0, 0, NULL);
520 break;
The fix is to backport the fix of bugs 14365043, 11761652
and 11746399.
14365043 PROTOCOL::END_STATEMENT(): ASSERTION `0' FAILED
11761652 HA_RND_INIT() RESULT CODE NOT CHECKED
11746399 RETURN VALUES OF HA_INDEX_INIT() AND INDEX_INIT() IGNORED
rb://1227 approved by guilhem and mattiasj.
Bug#14530242 CRASH / MEMORY CORRUPTION IN FILESORT_BUFFER::GET_RECORD_BUFFER WITH MYISAM
This is a backport of
Bug#12694872 - VALGRIND: 18,816 BYTES IN 196 BLOCKS ARE DEFINITELY LOST
Bug#13340270: assertion table->sort.record_pointers == __null
Bug#14536113 CRASH IN CLOSEFRM (TABLE.CC) OR UNPACK (FIELD.H) ON SUBQUERY WITH MYISAM TABLES
Also:
removed and re-added test files with file-ids from trunk.
Bug#14530242 CRASH / MEMORY CORRUPTION IN FILESORT_BUFFER::GET_RECORD_BUFFER WITH MYISAM
This is a backport of
Bug#12694872 - VALGRIND: 18,816 BYTES IN 196 BLOCKS ARE DEFINITELY LOST
Bug#13340270: assertion table->sort.record_pointers == __null
Bug#14536113 CRASH IN CLOSEFRM (TABLE.CC) OR UNPACK (FIELD.H) ON SUBQUERY WITH MYISAM TABLES
Also:
removed and re-added test files with file-ids from trunk.
client/mysqldump.c:
Slave needs to be initialized with 0
dbug/dbug.c:
Removed not existing function
plugin/semisync/semisync_master.cc:
Fixed compiler warning
sql/opt_range.cc:
thd needs to be set early as it's used in some error conditions.
sql/sql_table.cc:
Changed to use uchar* to make array indexing portable
storage/innobase/handler/ha_innodb.cc:
Removed not used variable
storage/maria/ma_delete.c:
Fixed compiler warning
storage/maria/ma_write.c:
Fixed compiler warning
ROWS THAT ARE EXPECTED
For non range/list partitioned tables (i.e. HASH/KEY):
When prune_partitions finds a multi-range list
(or in this test '<>') for a field of the partition index,
even if it cannot make any use of the multi-range,
it will continue with the next field of the partition index
and use that for pruning (even if it the previous
field could not be used). This results in partitions is
pruned away, leaving partitions that only matches
the last field in the partition index, and will exclude
partitions which might match any previous fields.
Fixed by skipping rest of partitioning key fields/parts
if current key field/part could not be used.
Also notice it is the order of the fields in the CREATE TABLE
statement that triggers this bug, not the order of fields in
primary/unique key or PARTITION BY KEY ().
It must not be the last field in the partitioning expression that
is not equal (or have a non single point range).
I.e. the partitioning index is created with the same field order
as in the CREATE TABLE. And for the bug to appear
the last field must be a single point and some previous field
must be a multi-point range.
ROWS THAT ARE EXPECTED
For non range/list partitioned tables (i.e. HASH/KEY):
When prune_partitions finds a multi-range list
(or in this test '<>') for a field of the partition index,
even if it cannot make any use of the multi-range,
it will continue with the next field of the partition index
and use that for pruning (even if it the previous
field could not be used). This results in partitions is
pruned away, leaving partitions that only matches
the last field in the partition index, and will exclude
partitions which might match any previous fields.
Fixed by skipping rest of partitioning key fields/parts
if current key field/part could not be used.
Also notice it is the order of the fields in the CREATE TABLE
statement that triggers this bug, not the order of fields in
primary/unique key or PARTITION BY KEY ().
It must not be the last field in the partitioning expression that
is not equal (or have a non single point range).
I.e. the partitioning index is created with the same field order
as in the CREATE TABLE. And for the bug to appear
the last field must be a single point and some previous field
must be a multi-point range.
COUNT DISTINCT GROUP BY
PROBLEM:
To calculate the final result of the count(distinct(select 1))
we call 'end_send' function instead of 'end_send_group'.
'end_send' cannot be called if we have aggregate functions
that need to be evaluated.
ANALYSIS:
While evaluating for a possible loose_index_scan option for
the query, the variable 'is_agg_distinct' is set to 'false'
as the item in the distinct clause is not a field. But, we
choose loose_index_scan by not taking this into
consideration.
So, while setting the final 'select_function' to evaluate
the result, 'precomputed_group_by' is set to TRUE as in
this case loose_index_scan is chosen and we do not have
agg_distinct in the query (which is clearly wrong as we
have one).
As a result, 'end_send' function is chosen as the final
select_function instead of 'end_send_group'. The difference
between the two being, 'end_send_group' evaluates the
aggregates while 'end_send' does not. Hence the wrong result.
FIX:
The variable 'is_agg_distinct' always represents if
'loose_idnex_scan' can be chosen for aggregate_distinct
functions present in the select.
So, we check for this variable to continue with
loose_index_scan option.
sql/opt_range.cc:
Do not continue if is_agg_distinct is not set in case
of agg_distinct functions.
COUNT DISTINCT GROUP BY
PROBLEM:
To calculate the final result of the count(distinct(select 1))
we call 'end_send' function instead of 'end_send_group'.
'end_send' cannot be called if we have aggregate functions
that need to be evaluated.
ANALYSIS:
While evaluating for a possible loose_index_scan option for
the query, the variable 'is_agg_distinct' is set to 'false'
as the item in the distinct clause is not a field. But, we
choose loose_index_scan by not taking this into
consideration.
So, while setting the final 'select_function' to evaluate
the result, 'precomputed_group_by' is set to TRUE as in
this case loose_index_scan is chosen and we do not have
agg_distinct in the query (which is clearly wrong as we
have one).
As a result, 'end_send' function is chosen as the final
select_function instead of 'end_send_group'. The difference
between the two being, 'end_send_group' evaluates the
aggregates while 'end_send' does not. Hence the wrong result.
FIX:
The variable 'is_agg_distinct' always represents if
'loose_idnex_scan' can be chosen for aggregate_distinct
functions present in the select.
So, we check for this variable to continue with
loose_index_scan option.
This is a backport of the fix for MySQL bug #13723054 in 5.6.
Original comment:
The crash is caused by arbitrary memory area owerwriting in case of
BLOB fields during attempt to copy BLOB field key image into record
buffer(record buffer is too small to get BLOB key part image).
note:
QUICK_GROUP_MIN_MAX_SELECT can not work with BLOB fields
because it uses record buffer as temporary buffer for key values
however this case is filtered out by covering_keys() check
in get_best_group_min_max() as BLOBs always require key length
modificator in the key declaration and if the key has a BLOB
then it can not be covered key.
The fix is to use 'max_used_key_length' key length instead of 0.
Analysis:
Spcifically the crash in this bug was a result of the call to key_copy()
that copied the whole key, inlcuding the BLOB field which is not used
for index access. Copying the blob field overwrote memory as far as the
function parameter 'key_info'. As a result the contents of key_info was
all 0, which resulted in a crash when this key_info was accessed few
lines below in key_cmp().
This bug led to wrong values of the use_count fields in some SEL_ARG
trees that triggered complains on the server side when executing the
test case for LP bug 800184 if a debug build of the server was used.
This was the result of the incomplete fix for bug 800184.
To complete it the following corrections had to be made:
- the copy constructor for SEL_TREE must call the new function incr_refs_all()
instead of the function incr_refs(), because references to next key parts
from any SEL_ARG tree belonging to the list of the first key part has to be
adjusted.
- the method and_sel_tree of the class SEL_IMERGE must use the copy constructor
of the SEL_TREE class to make a copy of its second argument before it ANDs it
with any SEL_TREE tree from the processed SEL_IMERGE object.
The range optimizer incorrectly chose a loose scan for group by
when there is a correlated WHERE condition. This range access
method cannot be executed for correlated conditions also with the
"range checked for each record" because generally the range access
method can change for each outer record. Loose scan destructively
changes the query plan and removes the GROUP operation, which will
result in wrong query plans if another range access is chosen
dynamically.
Analysis:
The class member QUICK_GROUP_MIN_MAX_SELECT::seen_first_key
was not reset between subquery re-executions. Thus each
subsequent execution continued from the group that was
reached by the previous subquery execution. As a result
loose scan reached end of file much earlier, and returned
empty result where it shouldn't.
Solution:
Reset seen_first_key before each re-execution of the
loose scan.
Due to this bug the function SEL_IMERGE::or_sel_tree_with_checks()
could build an inconsistent merge tree if one of the SEL_TREEs in the
resulting index merge happened to contain a full key range.
This could trigger an assertion failure.
The function key_and() erroneously called SEL_ARG::increment_use_count()
when SEL_ARG::incr_refs() should had been called. This could lead to
wrong values of use_count for some SEL_ARG trees.
A bug in the code of the function key_or could lead to a situation
when performing of an OR operation for one index changes the result
the operation for another index. This bug is fixed with this patch.
Also corrected the specification and the code of the function
or_sel_tree_with_checks.
sql/sql_insert.cc:
CREATE ... IF NOT EXISTS may do nothing, but
it is still not a failure. don't forget to my_ok it.
******
CREATE ... IF NOT EXISTS may do nothing, but
it is still not a failure. don't forget to my_ok it.
sql/sql_table.cc:
small cleanup
******
small cleanup
The assertion in innodb is triggered in this way:
1. mysql server does lookup on the primary key with full key,
innodb decides to not store cursor position because
"any index_next/prev call will return EOF anyway"
2. server asks innodb to return any next record in the index and the
assertion is triggered because no cursor position is stored.
It happens when a unique search (match_mode=ROW_SEL_EXACT)
in the clustered index is performed. InnoDB has never stored
the cursor position after a unique key lookup in the
clustered index because storing the position is an expensive
operation. The bug was introduced by
WL3220 'Loose index scan for aggregate functions'.
The fix is to disallow loose index scan optimization
for AGG_FUNC(DISTINCT ...) if GROUP_MIN_MAX quick select
uses clustered key.
mysql-test/r/group_min_max_innodb.result:
test case
mysql-test/t/group_min_max_innodb.test:
test case
sql/opt_range.cc:
disallow loose index scan optimization for
AGG_FUNC(DISTINCT ...) if GROUP_MIN_MAX
quick select uses clustered key.
The assertion in innodb is triggered in this way:
1. mysql server does lookup on the primary key with full key,
innodb decides to not store cursor position because
"any index_next/prev call will return EOF anyway"
2. server asks innodb to return any next record in the index and the
assertion is triggered because no cursor position is stored.
It happens when a unique search (match_mode=ROW_SEL_EXACT)
in the clustered index is performed. InnoDB has never stored
the cursor position after a unique key lookup in the
clustered index because storing the position is an expensive
operation. The bug was introduced by
WL3220 'Loose index scan for aggregate functions'.
The fix is to disallow loose index scan optimization
for AGG_FUNC(DISTINCT ...) if GROUP_MIN_MAX quick select
uses clustered key.
opt_range.cc: modified print_key() so that it doesn't do memory re-allocs when
printing multipart keys over varchar columns. When it did, key printout in
debug trace was interrupted with my_malloc/free printouts.
revno: 2876.47.174
revision-id: jorgen.loland@oracle.com-20110519120355-qn7eprkad9jqwu5j
parent: mayank.prasad@oracle.com-20110518143645-bdxv4udzrmqsjmhq
committer: Jorgen Loland <jorgen.loland@oracle.com>
branch nick: mysql-trunk-11765831
timestamp: Thu 2011-05-19 14:03:55 +0200
message:
BUG#11765831: 'RANGE ACCESS' MAY INCORRECTLY FILTER
AWAY QUALIFYING ROWS
The problem was that the ranges created when OR'ing two
conditions could be incorrect. Without the bugfix,
"I <> 6 OR (I <> 8 AND J = 5)" would create these ranges:
"NULL < I < 6",
"6 <= I <= 6 AND 5 <= J <= 5",
"6 < I < 8",
"8 <= I <= 8 AND 5 <= J <= 5",
"8 < I"
While the correct ranges is
"NULL < I < 6",
"6 <= I <= 6 AND 5 <= J <= 5",
"6 < I"
The problem occurs when key_or() ORs
(1) "NULL < I < 6, 6 <= I <= 6 AND 5 <= J <= 5, 6 < I" with
(2) "8 < I AND 5 <= J <= 5"
The reason for the bug is that in key_or(), SEL_ARG *tmp is
used to point to the range in (1) above that is merged with
(2) while key1 points to the root of the red-black tree of
(1). When merging (1) and (2), tmp refers to the "6 < I"
part whereas the root is the "6 <= ... AND 5 <= J <= 5" part.
key_or() decides that the tmp range needs to be split into
"6 < I < 8, 8 <= I <= 8, 8 < I", in which next_key_part of the
second range should be that of tmp. However, next_key_part is
set to key1->next_key_part ("5 <= J <= 5") instead of
tmp->next_key_part (empty). Fixing this gives the correct but
not optimal ranges:
"NULL < I < 6",
"6 <= I <= 6 AND 5 <= J <= 5",
"6 < I < 8",
"8 <= I <= 8",
"8 < I"
A second problem can be seen above: key_or() may create
adjacent ranges that could be replaced with a single range.
Fixes for this is also included in the patch so that the range
above becomes correct AND optimal:
"NULL < I < 6",
"6 <= I <= 6 AND 5 <= J <= 5",
"6 < I"
Merging adjacent ranges like this gives a slightly lower cost
estimate for the range access.
The problem was that optimizer removes some outer references (it they are
constant for example) and the list of outer items built during prepare phase is
not actual during execution phase when we need it as the cache parameters.
First solution was use pointer on pointer on outer reference Item and
initialize temporary table on demand. This solved most problem except case
when optimiser also reduce Item which contains outer references ('OR' in
this bug test suite).
The solution is to build the list of outer reference items on execution
phase (after optimization) on demand (just before temporary table creation)
by walking Item tree and finding outer references among Item_ident
(Item_field/Item_ref) and Item_sum items.
Removed depends_on list (because it is not neede any mnore for the cache, in the place where it was used it replaced with upper_refs).
Added processor (collect_outer_ref_processor) and get_cache_parameters() methods to collect outer references (or other expression parameters in future).
mysql-test/r/subselect_cache.result:
A new test added.
mysql-test/r/subselect_scache.result:
Changes in creating the cache and its paremeters order or adding arguments of aggregate function (which is a parameter also, but this has no influence on the result).
mysql-test/t/subselect_cache.test:
Added a new test.
sql/item.cc:
depends_on removed.
Added processor (collect_outer_ref_processor) and get_cache_parameters() methods to collect outer references.
Item_cache_wrapper collect parameters befor initialization of its cache.
sql/item.h:
depends_on removed.
Added processor (collect_outer_ref_processor) and get_cache_parameters() methods to collect outer references.
sql/item_cmpfunc.cc:
depends_on removed.
Added processor (collect_outer_ref_processor) to collect outer references.
sql/item_cmpfunc.h:
Added processor (collect_outer_ref_processor) to collect outer references.
sql/item_subselect.cc:
depends_on removed.
Added processor get_cache_parameters() method to collect outer references.
sql/item_subselect.h:
depends_on removed.
Added processor get_cache_parameters() method to collect outer references.
sql/item_sum.cc:
Added processor (collect_outer_ref_processor) method to collect outer references.
sql/item_sum.h:
Added processor (collect_outer_ref_processor) and get_cache_parameters() methods to collect outer references.
sql/opt_range.cc:
depends_on removed.
sql/sql_base.cc:
depends_on removed.
sql/sql_class.h:
New iterator added.
sql/sql_expression_cache.cc:
Build of list of items resolved in outer query done just before creating expression cache on the first execution of the subquery which removes influence of optimizer removing items (all optimization already done).
sql/sql_expression_cache.h:
Build of list of items resolved in outer query done just before creating expression cache on the first execution of the subquery which removes influence of optimizer removing items (all optimization already done).
sql/sql_lex.cc:
depends_on removed.
sql/sql_lex.h:
depends_on removed.
sql/sql_list.h:
Added add_unique method to add only unique elements to the list.
sql/sql_select.cc:
Support of new Item list added.
sql/sql_select.h:
Support of new Item list added.
Analysis:
This bug consists of two related problems that are
result of too early evaluation of single-row subqueries
during the optimization phase of the outer query.
Several optimizer code paths try to evaluate single-row
subqueries in order to produce a constant and use that
constant for further optimzation.
When the execution of the subquery peforms destructive
changes to the representation of the subquery, and these
changes are not anticipated by the subsequent optimization
phases of the outer query, we tipically get a crash or
failed assert.
Specifically, in this bug the inner-most suqbuery with
DISTINCT triggers a substitution of the original JOIN
object by a single-table JOIN object with a temp table
needed to perform the DISTINCT operation (created by
JOIN::make_simple_join).
This substitution breaks EXPLAIN because:
a) in the first example JOIN::cleanup no longer can
reach the original table of the innermost subquery, and
close all indexes, and
b) in this second test query, EXPLAIN attempts to print
the name of the internal temp table, and crashes because
the temp table has no name (NULL pointer instead).
Solution:
a) fully disable subquery evaluation during optimization
in all cases - both for constant propagation and range
optimization, and
b) change JOIN::join_free() to perform cleanup irrespective
of EXPLAIN or not.
Split status variable Rows_read to Rows_read and Rows_tmp_read so that one can see how much real data is read.
Same was done with with Handler_update and Handler_write.
Fixed bug in MEMORY tables where some variables was counted twice.
Added new internal handler call 'ha_close()' to have one place to gather statistics.
Fixed bug where thd->open_options was set to wrong value when doing admin_recreate_table()
mysql-test/r/status.result:
Updated test results and added new tests
mysql-test/r/status_user.result:
Udated test results
mysql-test/t/status.test:
Added new test for temporary table status variables
sql/ha_partition.cc:
Changed to call ha_close() instead of close()
sql/handler.cc:
Added internal_tmp_table variable for easy checking of temporary tables.
Added new internal handler call 'ha_close()' to have one place to gather statistics.
Gather statistics for internal temporary tables.
sql/handler.h:
Added handler variables internal_tmp_table, rows_tmp_read.
Split function update_index_statistics() to two.
Added ha_update_tmp_row() for faster tmp table handling with more statistics.
sql/item_sum.cc:
ha_write_row() -> ha_write_tmp_row()
sql/multi_range_read.cc:
close() -> ha_close()
sql/mysqld.cc:
New status variables: Rows_tmp_read, Handler_tmp_update and Handler_tmp_write
sql/opt_range.cc:
close() -> ha_close()
sql/sql_base.cc:
close() -> ha_close()
sql/sql_class.cc:
Added handling of rows_tmp_read
sql/sql_class.h:
Added new satistics variables.
rows_read++ -> update_rows_read() to be able to correctly count reads to internal temp tables.
Added handler::ha_update_tmp_row()
sql/sql_connect.cc:
Added comment
sql/sql_expression_cache.cc:
ha_write_row() -> ha_write_tmp_row()
sql/sql_select.cc:
close() -> ha_close()
ha_update_row() -> ha_update_tmp_row()
sql/sql_show.cc:
ha_write_row() -> ha_write_tmp_row()
sql/sql_table.cc:
Fixed bug where thd->open_options was set to wrong value when doing admin_recreate_table()
sql/sql_union.cc:
ha_write_row() -> ha_write_tmp_row()
sql/sql_update.cc:
ha_write_row() -> ha_write_tmp_row()
sql/table.cc:
close() -> ha_close()
storage/heap/ha_heap.cc:
Removed double counting of statistic variables.
close -> ha_close() to get tmp table statistics.
storage/maria/ha_maria.cc:
close -> ha_close() to get tmp table statistics.
introduced at the latest merge 5.1->5.2->5.3.
It is basically not needed since if SQL_SELECT::pre_idx_push_select_cond
is not NULL then SQL_SELECT::original_cond would point to the same condition
as SQL_SELECT::pre_idx_push_select_cond. Otherwise SQL_SELECT::original_cond
would be equal to SQL_SELECT::cond.
A lot of small fixes and new test cases.
client/mysqlbinlog.cc:
Cast removed
client/mysqltest.cc:
Added missing DBUG_RETURN
include/my_pthread.h:
set_timespec_time_nsec() now only takes one argument
mysql-test/t/date_formats.test:
Remove --disable_ps_protocl as now also ps supports microseconds
mysys/my_uuid.c:
Changed to use my_interval_timer() instead of my_getsystime()
mysys/waiting_threads.c:
Changed to use my_hrtime()
sql/field.h:
Added bool special_const_compare() for fields that may convert values before compare (like year)
sql/field_conv.cc:
Added test to get optimal copying of identical temporal values.
sql/item.cc:
Return that item_int is equal if it's positive, even if unsigned flag is different.
Fixed Item_cache_str::save_in_field() to have identical null check as other similar functions
Added proper NULL check to Item_cache_int::save_in_field()
sql/item_cmpfunc.cc:
Don't call convert_constant_item() if there is nothing that is worth converting.
Simplified test when years should be converted
sql/item_sum.cc:
Mark cache values in Item_sum_hybrid as not constants to ensure they are not replaced by other cache values in compare_datetime()
sql/item_timefunc.cc:
Changed sec_to_time() to take a my_decimal argument to ensure we don't loose any sub seconds.
Added Item_temporal_func::get_time() (This simplifies some things)
sql/mysql_priv.h:
Added Lazy_string_decimal()
sql/mysqld.cc:
Added my_decimal constants max_seconds_for_time_type, time_second_part_factor
sql/table.cc:
Changed expr_arena to be of type CONVENTIONAL_EXECUTION to ensure that we don't loose any items that are created by fix_fields()
sql/tztime.cc:
TIME_to_gmt_sec() now sets *in_dst_time_gap in case of errors
This is needed to be able to detect if timestamp is 0
storage/maria/lockman.c:
Changed from my_getsystime() to set_timespec_time_nsec()
storage/maria/ma_loghandler.c:
Changed from my_getsystime() to my_hrtime()
storage/maria/ma_recovery.c:
Changed from my_getsystime() to mmicrosecond_interval_timer()
storage/maria/unittest/trnman-t.c:
Changed from my_getsystime() to mmicrosecond_interval_timer()
storage/xtradb/handler/ha_innodb.cc:
Added support for new time,datetime and timestamp
unittest/mysys/thr_template.c:
my_getsystime() -> my_interval_timer()
unittest/mysys/waiting_threads-t.c:
my_getsystime() -> my_interval_timer()
- Added a lot of code comments
- Updated get_best_ror_intersec() to prefer index scan on not clustered keys before clustered keys.
- Use HA_CLUSTERED_INDEX to define if one should use HA_MRR_INDEX_ONLY
- For test of using index or filesort to resolve ORDER BY, use HA_CLUSTERED_INDEX flag instead of primary_key_is_clustered()
- Use HA_TABLE_SCAN_ON_INDEX instead of primary_key_is_clustered() to decide if ALTER TABLE ... ORDER BY will have any effect.
sql/ha_partition.h:
Added comment with warning for code unsafe to use with multiple storage engines at the same time
sql/handler.h:
Added HA_CLUSTERED_INDEX.
Documented primary_key_is_clustered()
sql/opt_range.cc:
Added code comments
Updated get_best_ror_intersec() to ignore clustered keys.
Optimized away cpk_scan_used and one instance of current_thd (Simpler code)
Use HA_CLUSTERED_INDEX to define if one should use HA_MRR_INDEX_ONLY
sql/sql_select.cc:
Changed comment to #ifdef
For test of using index or filesort to resolve ORDER BY, use HA_CLUSTERED_INDEX flag instead of primary_key_is_clustered()
(Change is smaller than what it looks beause of indentation change)
sql/sql_table.cc:
Use HA_TABLE_SCAN_ON_INDEX instead of primary_key_is_clustered() to decide if ALTER TABLE ... ORDER BY will have any effect.
storage/innobase/handler/ha_innodb.h:
Added support for HA_CLUSTERED_INDEX
storage/innodb_plugin/handler/ha_innodb.cc:
Added support for HA_CLUSTERED_INDEX
storage/xtradb/handler/ha_innodb.cc:
Added support for HA_CLUSTERED_INDEX
Resolved all conflicts, bad merges and fixed a few minor bugs in the code.
Commented out the queries from multi_update, view, subselect_sj, func_str,
derived_view, view_grant that failed either with crashes in ps-protocol or
with wrong results.
The failures are clear indications of some bugs in the code and these bugs
are to be fixed.
The function test_quick_select by mistake did not update the value
of table->quick_condition_rows for index intersection scans though
the specification explicitly required to do so from any table access
plan once the plan provided a better upper bound for the number of
rows selected from the table. It resulted in a bogus, usually very
big number saved as the cost of the table access. This, in its turn,
in many cases forced the optimizer to make a bad choice of the
execution plan for join queries.
Both these two bugs happened due to the following problem.
When a view column is referenced in the query an Item_direct_view_ref
object is created that is refers to the Item_field for the column.
All references to the same view column refer to the same Item_field.
Different references can belong to different AND/OR levels and,
as a result, can be included in different Item_equal object.
These Item_equal objects may include different constant objects.
If these constant objects are substituted for the Item_field created
for a view column we have a conflict situation when the second
substitution annuls the first substitution. This leads to
wrong result sets returned by the query. Bug #724942 demonstrates
such an erroneous behaviour.
Test case of the bug #717577 produces wrong result sets because best
equal fields of the multiple equalities built for different OR levels
of the WHERE condition differs. The subsitution for the best equal field
in the second OR branch overwrites the the substitution made for the
first branch.
To avoid such conflicts we have to substitute for the references
to the view columns rather than for the underlying field items.
To make such substitutions possible we have to include into
multiple equalities references to view columns rather than
field items created for such columns.
This patch modifies the Item_equal class to include references
to view columns into multiple equality objects. It also performs
a clean up of the class methods and adds more comments. The methods
of the Item_direct_view_ref class that assist substitutions for
references to view columns has been also added by this patch.
When executing row-ordered-retrieval index merge,
the handler was cloned, but it used the wrong
memory root, so instead of allocating memory
on the thread/query's mem_root, it used the table's
mem_root, resulting in non released memory in the
table object, and was not freed until the table was
closed.
Solution was to ensure that memory used during cloning
of a handler was allocated from the correct memory root.
This was implemented by fixing handler::clone() to also
take a name argument, so it can be used with partitioning.
And in ha_partition only allocate the ha_partition's ref, and
call the original ha_partition partitions clone() and set at cloned
partitions.
Fix of .bzrignore on Windows with VS 2010
When executing row-ordered-retrieval index merge,
the handler was cloned, but it used the wrong
memory root, so instead of allocating memory
on the thread/query's mem_root, it used the table's
mem_root, resulting in non released memory in the
table object, and was not freed until the table was
closed.
Solution was to ensure that memory used during cloning
of a handler was allocated from the correct memory root.
This was implemented by fixing handler::clone() to also
take a name argument, so it can be used with partitioning.
And in ha_partition only allocate the ha_partition's ref, and
call the original ha_partition partitions clone() and set at cloned
partitions.
Fix of .bzrignore on Windows with VS 2010
This allows us to simplify and speed up some tests and also remove get_cached_item()
sql/item.h:
Added item.real_type()
Removed get_cached_item()
sql/opt_range.cc:
Simplify test
sql/sql_select.cc:
Simplify test
sql/sql_show.cc:
Simplify test
and collateral changes.
* introduce my_hrtime_t, my_timediff_t, and conversion macros
* inroduce TIME_RESULT, but it can only be returned from Item::cmp_type(),
never from Item::result_type()
* pack_time/unpack_time function for "packed" representation of
MYSQL_TIME in a longlong that can be compared
* ADDTIME()/SUBTIME()/+- INTERVAL now work with TIME values
* numbers aren't quoted in EXPLAIN EXTENDED
* new column I_S.COLUMNS.DATETIME_PRECISION
* date/time values are compares to anything as date/time, not as strings or numbers.
* old timestamp(X) is no longer supported
* MYSQL_TIME to string conversion functions take precision as an argument
* unified the warnings from Field_timestamp/datetime/time/date/newdate store methods
* Field_timestamp_hires, Field_datetime_hires, Field_time_hires
* Field_temporal
* Lazy_string class to pass a value (string, number, time) polymorphically down the stack
* make_truncated_value_warning and Field::set_datetime_warning use Lazy_string as an argument, removed char*/int/double variants
* removed Field::can_be_compared_as_longlong(). Use Field::cmp_type() == INT_RESULT instead
* introduced Item::cmp_result() instead of Item::is_datetime() and Item::result_as_longlong()
* in many cases date/time types are treated like other types, not as special cases
* greatly simplified Arg_comparator (regarding date/time/year code)
* SEC_TO_TIME is real function, not integer.
* microsecond precision in NOW, CURTIME, etc
* Item_temporal. All items derived from it only provide get_date, but no val* methods
* replication of NOW(6)
* Protocol::store(time) now takes the precision as an argument
* @@TIMESTAMP is a double
client/mysqlbinlog.cc:
remove unneded casts
include/my_sys.h:
introduce my_hrtime_t, my_timediff_t, and conversion macros
include/my_time.h:
pack_time/unpack_time, etc.
convenience functions to work with MYSQL_TIME::second_part
libmysql/libmysql.c:
str_to_time() is gone. str_to_datetime() does it now.
my_TIME_to_str() takes the precision as an argument
mysql-test/include/ps_conv.inc:
time is not equal to datetime anymore
mysql-test/r/distinct.result:
a test for an old MySQL bug
mysql-test/r/explain.result:
numbers aren't quoted in EXPLAIN EXTENDED
mysql-test/r/func_default.result:
numbers aren't quoted in EXPLAIN EXTENDED
mysql-test/r/func_sapdb.result:
when decimals=NOT_FIXED_DEC it means "not fixed" indeed
mysql-test/r/func_test.result:
numbers aren't quoted in EXPLAIN EXTENDED
mysql-test/r/func_time.result:
ADDTIME()/SUBTIME()/+- INTERVAL now work with TIME values
mysql-test/r/having.result:
numbers aren't quoted in EXPLAIN EXTENDED
mysql-test/r/information_schema.result:
new column I_S.COLUMNS.DATETIME_PRECISION
mysql-test/r/join_outer.result:
numbers aren't quoted in EXPLAIN EXTENDED
mysql-test/r/metadata.result:
TIMESTAMP no longer has zerofill flag
mysql-test/r/range.result:
invalid datetime is not compared with as a string
mysql-test/r/select.result:
NO_ZERO_IN_DATE, etc only affect storage - according to the manual
numbers aren't quoted in EXPLAIN EXTENDED
mysql-test/r/subselect.result:
numbers aren't quoted in EXPLAIN EXTENDED
mysql-test/r/sysdate_is_now.result:
when decimals=NOT_FIXED_DEC it means "not fixed" indeed
mysql-test/r/type_blob.result:
TIMESTAMP(N) is not deprecated
mysql-test/r/type_timestamp.result:
old TIMESTAMP(X) semantics is not supported anymore
mysql-test/r/union.result:
numbers aren't quoted in EXPLAIN EXTENDED
mysql-test/r/varbinary.result:
numbers aren't quoted in EXPLAIN EXTENDED
mysql-test/t/distinct.test:
test for an old MySQL bug
mysql-test/t/func_time.test:
+- INTERVAL now works with TIME values
mysql-test/t/select.test:
typo
mysql-test/t/subselect.test:
only one error per statement, please
mysql-test/t/system_mysql_db_fix40123.test:
old timestamp(X) is no longer supported
mysql-test/t/system_mysql_db_fix50030.test:
old timestamp(X) is no longer supported
mysql-test/t/system_mysql_db_fix50117.test:
old timestamp(X) is no longer supported
mysql-test/t/type_blob.test:
old timestamp(X) is no longer supported
mysql-test/t/type_timestamp.test:
old timestamp(X) is no longer supported
mysys/my_getsystime.c:
functions to get the time with microsecond precision
mysys/my_init.c:
move the my_getsystime.c initialization code to my_getsystime.c
mysys/my_static.c:
no need to make these variables extern
mysys/my_static.h:
no need to make these variables extern
scripts/mysql_system_tables.sql:
old timestamp(X) is no longer supported
scripts/mysql_system_tables_fix.sql:
old timestamp(X) is no longer supported
scripts/mysqlhotcopy.sh:
old timestamp(X) is no longer supported
sql-common/my_time.c:
* call str_to_time from str_to_datetime, as appropriate
* date/time to string conversions take precision as an argument
* number_to_time()
* TIME_to_double()
* pack_time() and unpack_time()
sql/event_data_objects.cc:
cast is not needed
my_datetime_to_str() takes precision as an argument
sql/event_db_repository.cc:
avoid dangerous downcast (because the pointer is
not always Field_timestamp, see events_1.test)
sql/event_queue.cc:
avoid silly double-work for cond_wait
(having an endpoint of wait, subtract the current time to get the timeout,
and use set_timespec() macro to fill in struct timespec, by adding the current
time to the timeout)
sql/field.cc:
* remove virtual Field::get_time(), everyone should use only Field::get_date()
* remove lots of #ifdef WORDS_BIGENDIAN
* unified the warnings from Field_timestamp/datetime/time/date/newdate store methods
* Field_timestamp_hires, Field_datetime_hires, Field_time_hires
* Field_temporal
* make_truncated_value_warning and Field::set_datetime_warning use Lazy_string as an argument, removed char*/int/double variants
sql/field.h:
* remove virtual Field::get_time(), everyone should use only Field::get_date()
* remove lots of #ifdef WORDS_BIGENDIAN
* unified the warnings from Field_timestamp/datetime/time/date/newdate store methods
* Field_timestamp_hires, Field_datetime_hires, Field_time_hires
* Field_temporal
* make_truncated_value_warning and Field::set_datetime_warning use Lazy_string as an argument, removed char*/int/double variants
* removed Field::can_be_compared_as_longlong(). Use Field::cmp_type() == INT_RESULT instead
sql/filesort.cc:
TIME_RESULT, cmp_time()
sql/item.cc:
* numbers aren't quoted in EXPLAIN EXTENDED
* Item::cmp_result() instead of Item::is_datetime() and Item::result_as_longlong()
* virtual Item::get_time() is gone
* Item_param::field_type() is set correctly
* Item_datetime, for a datetime constant
* time to anything is compared as a time
* Item_cache::print() prints the value is available
* bug fixed in Item_cache_int::val_str()
sql/item.h:
* Item::print_value(), to be used from Item_xxx::print() when needed
* Item::cmp_result() instead of Item::is_datetime() and Item::result_as_longlong()
* virtual Item::get_time() is gone
* Item_datetime, for a datetime constant
* better default for cast_to_int_type()
* Item_cache objects now *always* have the field_type() set
sql/item_cmpfunc.cc:
* get_year_value, get_time_value are gone. get_datetime_value does it all
* get_value_a_func, get_value_b_func are gone
* can_compare_as_dates() is gone too, TIME_RESULT is used instead
* cmp_type() instead or result_type() when doing a comparison
* compare_datetime and compate_e_datetime in the comparator_matrix, is_nulls_eq is gone
* Item::cmp_result() instead of Item::is_datetime() and Item::result_as_longlong()
sql/item_cmpfunc.h:
greatly simplified Arg_comparator
sql/item_create.cc:
* fix a bug in error messages in CAST
sql/item_func.cc:
Item::cmp_result() instead of Item::is_datetime() and Item::result_as_longlong()
mention all possibitiles in switch over Item_result values, or use default:
sql/item_row.h:
overwrite the default cmp_type() for Item_row,
as no MYSQL_TYPE_xxx value corresponds to ROW_RESULT
sql/item_timefunc.cc:
rewrite make_datetime to support precision argument
SEC_TO_TIME is real function, not integer.
many functions that returned temporal values had duplicate code in val_* methods,
some of them did not have get_date() which resulted in unnecessary date->str->date conversions.
Now they all are derived from Item_temporal_func and *only* provide get_date, not val* methods.
many fixes to set decimals (datetime precision) correctly.
sql/item_timefunc.h:
SEC_TO_TIME is real function, not integer.
many functions that returned temporal values had duplicate code in val_* methods,
some of them did not have get_date() which resulted in unnecessary date->str->date conversions.
Now they all are derived from Item_temporal_func and *only* provide get_date, not val* methods.
many fixes to set decimals (datetime precision) correctly.
sql/log_event.cc:
replication of NOW(6)
sql/log_event.h:
replication of NOW(6)
sql/mysql_priv.h:
Lazy_string class to pass a value (string, number, time) polymorphically down the stack.
make_truncated_value_warning() that uses it.
sql/mysqld.cc:
datetime in Arg_comparator::comparator_matrix
sql/opt_range.cc:
cleanup: don't disable warnings before calling save_in_field_no_warnings()
sql/protocol.cc:
Protocol::store(time) now takes the precision as an argument
sql/protocol.h:
Protocol::store(time) now takes the precision as an argument
sql/rpl_rli.cc:
small cleanup
sql/set_var.cc:
SET TIMESTAMP=double
sql/set_var.h:
@@TIMESTAMP is a double
sql/share/errmsg.txt:
precision and scale are unsigned
sql/slave.cc:
replication of NOW(6)
sql/sp_head.cc:
cleanup
sql/sql_class.cc:
support for NOW(6)
sql/sql_class.h:
support for NOW(6)
sql/sql_insert.cc:
support for NOW(6)
sql/sql_select.cc:
use item->cmp_type().
move a comment where it belongs
sql/sql_show.cc:
new column I_S.COLUMNS.DATETIME_PRECISION
sql/sql_yacc.yy:
TIME(X), DATETIME(X), cast, NOW(X), CURTIME(X), etc
sql/time.cc:
fix date_add_interval() to support MYSQL_TIMESTAMP_TIME argument
storage/myisam/ha_myisam.cc:
TIMESTAMP no longer carries ZEROFIELD flag, still we keep MYI file compatible.
strings/my_vsnprintf.c:
warnings
tests/mysql_client_test.c:
old timestamp(X) does not work anymore
datetime is no longer equal to time
Changed some String.ptr() -> String.c_ptr() for String that are not guaranteed to end with \0
Removed some c_ptr() usage from parameters to functions that takes ptr & length
Use preallocate buffers to avoid calling malloc() for most operations.
sql/event_db_repository.cc:
alias is now a String
sql/event_scheduler.cc:
c_ptr -> c_ptr_safe() to avoid warnings from valgrind.
sql/events.cc:
c_ptr -> c_ptr_safe() to avoid warnings from valgrind.
c_ptr -> ptr() as function takes ptr & length
sql/field.cc:
alias is now a String
sql/field.h:
alias is now a String
sql/ha_partition.cc:
alias is now a String
sql/handler.cc:
alias is now a String
ptr() -> c_ptr() as string is not guaranteed to be \0 terminated
sql/item.cc:
Store error parameter in separarte buffer to ensure correct error message
sql/item_func.cc:
ptr() -> c_ptr_safe() as string is not guaranteed to be \0 terminated
sql/item_sum.h:
Use my_strtod() instead of my_atof() to not have to make string \0 terminated
sql/lock.cc:
alias is now a String
sql/log.cc:
c_ptr() -> ptr() as function takes ptr & length
sql/log_event.cc:
c_ptr_quick() -> ptr() as we only want to get the pointer to String buffer
sql/opt_range.cc:
ptr() -> c_ptr() as string is not guaranteed to be \0 terminated
sql/opt_table_elimination.cc:
alias is now a String
sql/set_var.cc:
ptr() -> c_ptr() as string is not guaranteed to be \0 terminated
c_ptr() -> c_ptr_safe() to avoid warnings from valgrind.
c_ptr() -> ptr() as function takes ptr & length
Simplify some code.
sql/sp.cc:
c_ptr() -> ptr() as function takes ptr & length
sql/sp_rcontext.cc:
alias is now a String
sql/sql_base.cc:
alias is now a String.
Here we win a realloc() for most alias usage.
sql/sql_class.cc:
Use size descriptor for printf() to avoid accessing bytes outside of buffer
sql/sql_insert.cc:
Change allocation of TABLE as it's now contains a String
_ptr() -> ptr() as function takes ptr & length
sql/sql_load.cc:
Use preallocate buffers to avoid calling malloc() for most operations.
sql/sql_parse.cc:
Use c_ptr_safe() to ensure string is \0 terminated.
sql/sql_plugin.cc:
c_ptr_quick() -> ptr() as function takes ptr & length
sql/sql_select.cc:
alias is now a String
sql/sql_show.cc:
alias is now a String
sql/sql_string.h:
Added move() function to change who owns the string (owner does the free)
sql/sql_table.cc:
alias is now a String
c_ptr() -> c_ptr_safe() to avoid warnings from valgrind.
sql/sql_test.cc:
c_ptr() -> c_ptr_safe() to avoid warnings from valgrind.
alias is now a String
sql/sql_trigger.cc:
c_ptr() -> c_ptr_safe() to avoid warnings from valgrind.
Use field->init() to setup pointers to alias.
sql/sql_update.cc:
alias is now a String
sql/sql_view.cc:
ptr() -> c_ptr_safe() as string is not guaranteed to be \0 terminated
sql/sql_yacc.yy:
r() -> c_ptr() as string is not guaranteed to be \0 terminated
sql/table.cc:
alias is now a String
sql/table.h:
alias is now a String
storage/federatedx/ha_federatedx.cc:
Remove extra 1 byte alloc that is automaticly done by strmake()
Ensure that error message ends with \0
storage/maria/ha_maria.cc:
alias is now a String
storage/myisam/ha_myisam.cc:
alias is now a String
- Make get_constant_key_infix() take into account that there may be SEL_TREEs with
type=SEL_ARG::MAYBE_KEY, which it cannot process, because they are not real ranges
but rather indications that we might have been able to construct a range if we had
values for some other tables' fields.
(check_quick_select() already has such check)
- Fixed some issues with partitions and connection_string, which also fixed lp:716890 "Pre- and post-recovery crash in Aria"
- Fixed wrong assert in Aria
Now need to merge with latest xtradb before pushing
sql/ha_partition.cc:
Ensure that m_ordered_rec_buffer is not freed before close.
sql/mysqld.cc:
Changed to use opt_stack_trace instead of opt_pstack.
Removed references to pstack
sql/partition_element.h:
Ensure that connect_string is initialized
storage/maria/ma_key_recover.c:
Fixed wrong assert
Fixed query plans with loose index scan degraded into index scan.
Analysis:
With MWL#89 subqueries are no longer executed and substituted during
the optimization of the outer query. As a result subquery predicates
that were previously executed and substituted by a constant before
the range optimizer were present as regular subquery predicates during
range optimization. The procedure check_group_min_max_predicates()
had a naive test that ruled out all queries with subqueries in the
WHERE clause. This resulted in worse plans with MWL#89.
Solution:
The solution is to refine the test in check_group_min_max_predicates()
to check if each MIN/MAX argument is referred to by a subquery predicate.
- Removed files specific to compiling on OS/2
- Removed files specific to SCO Unix packaging
- Removed "libmysqld/copyright", text is included in documentation
- Removed LaTeX headers for NDB Doxygen documentation
- Removed obsolete NDB files
- Removed "mkisofs" binaries
- Removed the "cvs2cl.pl" script
- Changed a few GPL texts to use "program" instead of "library"
- Removed files specific to compiling on OS/2
- Removed files specific to SCO Unix packaging
- Removed "libmysqld/copyright", text is included in documentation
- Removed LaTeX headers for NDB Doxygen documentation
- Removed obsolete NDB files
- Removed "mkisofs" binaries
- Removed the "cvs2cl.pl" script
- Changed a few GPL texts to use "program" instead of "library"
- This allows us to detect missing my_afree() calls and also find overruns (when running with valgrind) to alloca() areas.
- Added missing my_afree() calls
- Fixed wrong call to my_afree()
include/my_sys.h:
When compiling with valgrind, change my_alloca() to use my_malloc()
mysql-test/suite/innodb/t/innodb_bug57255.test:
Speed up taste case (patch from Stewart Smith)
mysql-test/suite/innodb_plugin/t/innodb_bug57255.test:
Speed up taste case (patch from Stewart Smith)
sql/ha_partition.cc:
Removed casts from my_afree()
sql/opt_range.cc:
Add missing my_afree() calls.
storage/maria/ma_rt_split.c:
Fixed wrong parameter to my_afree()
Also:
Changed the value of TIME_FOR_COMPARE_ROWID to make it the same as for MWL 21.
Changed some queries in range_vs_index_merge.test to make them generate
the same plans as earlier.
when semijoin=on
When setting the aggregate function as having no rows to report
the function no_rows_in_result() was calling Item_sum::reset().
However this function in addition to cleaning up the aggregate
value by calling aggregator_clear() was also adding the current
value to the aggregate value by calling aggregator_add().
Fixed by making no_rows_in_result() to call aggregator_clear()
directly.
Renamed Item_sum::reset to Item_sum::reset_and_add() to
and added a comment to avoid misinterpretation of what the
function does.
when semijoin=on
When setting the aggregate function as having no rows to report
the function no_rows_in_result() was calling Item_sum::reset().
However this function in addition to cleaning up the aggregate
value by calling aggregator_clear() was also adding the current
value to the aggregate value by calling aggregator_add().
Fixed by making no_rows_in_result() to call aggregator_clear()
directly.
Renamed Item_sum::reset to Item_sum::reset_and_add() to
and added a comment to avoid misinterpretation of what the
function does.
read after the last element of the array of rec_per_key
values for an index. This caused a valgrind complain and
probably could result in wrong estimates of the cardinality
of index intersections.
