While printing the Max keyfile length 'llstr' call was used which
was treating the max_key_file_length as negative.
Changing this to ullstr fixes the problem.
myisamchk output will differ in 32 bit and 64 bit Operating systems
so its not possible to have test case for this bug.
The test started failing following the push for BUG#41541.
Some of the algorithms access bytes beyond the input data
and this can affect up to one byte less than "word size"
which is BITS_SAVED / 8.
Fixed by adding (BITS_SAVED / 8) -1 bytes to buffer size
(i.e. Memory Segment #2) to avoid accessing un-allocated data.
The problem is that a SELECT .. FOR UPDATE statement might open
a table and later wait for a impeding global read lock without
noticing whether it is holding a table that is being waited upon
the the flush phase of the process that took the global read
lock.
The same problem also affected the following statements:
LOCK TABLES .. WRITE
UPDATE .. SET (update and multi-table update)
TRUNCATE TABLE ..
LOAD DATA ..
The solution is to make the above statements wait for a impending
global read lock before opening the tables. If there is no
impending global read lock, the statement raises a temporary
protection against global read locks and progresses smoothly
towards completion.
Important notice: the patch does not try to address all possible
cases, only those which are common and can be fixed unintrusively
enough for 5.0.
Bug#32136: mysqld_multi --defaults-file not respected while using \
--mysqld=mysqld_safe
Revert change that adds "--no-defaults" to mysqld_multi.
This closes Bug#43508 and re-opens Bug#32136.
Original commentary:
Bug #37348: Crash in or immediately after JOIN::make_sum_func_list
The optimizer pulls up aggregate functions which should be aggregated in
an outer select. At some point it may substitute such a function for a field
in the temporary table. The setup_copy_fields function doesn't take this
into account and may overrun the copy_field buffer.
Fixed by filtering out the fields referenced through the specialized
reference for aggregates (Item_aggregate_ref).
Added an assertion to make sure bugs that cause similar discrepancy
don't go undetected.
updates
Attempt to execute trigger or stored function with multi-UPDATE
which used - but didn't update - a table that was also used by
the calling statement led to an error. Read-only reference to
tables used in the calling statement should be allowed.
This problem was caused by the fact that check for conflicting
use of tables in SP/triggers was performed in open_tables(),
and in case of multi-UPDATE we didn't know exact lock type at
this stage.
We solve the problem by moving this check to lock_tables(), so
it can be performed after exact lock types for tables used by
multi-UPDATE are determined.
UNION could convert fixed-point FLOAT(M,D)/DOUBLE(M,D) columns
to FLOAT/DOUBLE when aggregating data types from the SELECT
substatements. While there is nothing particularly wrong with
this behavior, especially when M is greater than the hardware
precision limits, it could be confusing in cases when all
SELECT statements in a union have the same
FLOAT(M,D)/DOUBLE(M,D) columns with equal precision
specifications listed in the same position.
Since the manual is quite vague on what data type should be
returned in such cases, the bug was fixed by implementing the
most 'expected' behavior: do not convert FLOAT(M,D)/DOUBLE(M,D)
to anything else if all SELECT statements in a UNION have the
same precision for that column.
When the thread executing a DDL was killed after finished its
execution but before writing the binlog event, the error code in
the binlog event could be set wrongly to ER_SERVER_SHUTDOWN or
ER_QUERY_INTERRUPTED.
This patch fixed the problem by ignoring the kill status when
constructing the event for DDL statements.
This patch also included the following changes in order to
provide the test case.
1) modified mysqltest to support variable for connection command
2) modified mysql-test-run.pl, add new variable MYSQL_SLAVE to
run mysql client against the slave mysqld.
The problem is that the read and write methods of the shared
memory transport (protocol) didn't react to asynchronous close
events, which could lead to a lock up as the client would wait
(until time out) for a server response that will never come.
The solution is to also wait for close events while waiting
for I/O from or to the server.
including modifications according to code review
+ backport of the fix for
Bug 41932 funcs_1: is_collation_character_set_applicability path
too long for tar
which was missing in 5.0 (just a renaming of two files)
When add an aliase name after NAME_CONST, the aliase name will be overwrite.
NAME_CONST will re-set the field's name only if there isn't an aliase in the
function fix-fields().
If there is an aliase, NAME_CONST doesn't re-set the field's name and keeps the old
name.
due to name_const substitution
Problem:
"In general, statements executed within a stored procedure
are written to the binary log using the same rules that
would apply were the statements to be executed in standalone
fashion. Some special care is taken when logging procedure
statements because statement execution within procedures
is not quite the same as in non-procedure context".
For example, each reference to a local variable in SP's
statements is replaced by NAME_CONST(var_name, var_value).
Queries like
"CREATE TABLE ... SELECT FUNC(local_var ..."
are logged as
"CREATE TABLE ... SELECT FUNC(NAME_CONST("local_var", var_value) ..."
that leads to differrent field names and
might result in "Incorrect column name" if var_value is long enough.
Fix: in 5.x we'll issue a warning in such a case.
In 6.0 we should get rid of NAME_CONST().
Note: this issue and change should be described in the documentation
("Binary Logging of Stored Programs").
Fine-tuning. Broke out comparison into method by
suggestion of Davi. Clarified comments. Reverting
test-case which I find too brittle; proper test
case in 5.1+.
(Pushing for Azundris)
We allow security-contexts with NULL users (for
system-threads and for unauthenticated users).
If a non-SUPER-user tried to KILL such a thread,
we tried to compare the user-fields to see whether
they owned that thread. Comparing against NULL was
not a good idea.
If KILLer does not have SUPER-privilege, we
specifically check whether both KILLer and KILLee
have a non-NULL user before testing for string-
equality. If either is NULL, we reject the KILL.
After the table is compressed by the myisampack utility,
opening the table by the server produces valgrind warnings.
This happens because when we try to read a record into the buffer
we alway assume that the remaining buffer to read is always equal
to word size(4 or 8 or 2 bytes) we read. Sometimes we have
remaining buffer size less than word size and trying to read the
entire word size will end up in valgrind errors.
Fixed by reading byte by byte when we detect the remaining buffer
size is less than the word size.
expired timeout on debx86-b in PB
Moved the resource-intensive test case for bug #41486 into
a separate test file to reduce execution time for mysql.test.
produce incorrect results for ROUND()
Added a workaround and a configure check to test whether
isinf() is affected by the GCC bug #39228.
Since no code in MySQL server is currently affected by that
bug, the patch is actually a safeguard for possible future
code modifications. No test cases or changelog entries are
needed.
When do 'insert delayed' operation, the time_zone info doesn't be keeped in the row info.
So when we do insert sometime later, time_zone didn't write into binlog.
This will cause wrong result for timestamp column in slave.
Our solution is that adding time_zone info with the delayed-row and
restoring time_zone from row-info when execute that row in the furture by another thread.
So we can write correct time_zone info into binlog and got correct result in slave.
Details for Bug#43015 main.lock_multi: Weak code (sleeps etc.)
-------------------------------------------------------------
- The fix for bug 42003 already removed a lot of the weaknesses mentioned.
- Tests showed that there are unfortunately no improvements of this tests
in MySQL 5.1 which could be ported back to 5.0.
- Remove a superfluous "--sleep 1" around line 195
Details for Bug#43065 main.lock_multi: This test is too big if the disk is slow
-------------------------------------------------------------------------------
- move the subtests for the bugs 38499 and 36691 into separate scripts
- runtime under excessive parallel I/O load after applying the fix
lock_multi [ pass ] 22887
lock_multi_bug38499 [ pass ] 536926
lock_multi_bug38691 [ pass ] 258498
