Some of the server implementations don't support dates later
than 2038 due to the internal time type being 32 bit.
Added checks so that the server will refuse dates that cannot
be handled by either throwing an error when setting date at
runtime or by refusing to start or shutting down the server if
the system date cannot be stored in my_time_t.
and .tar.gz, windows vs linux..
On Intel x86 machines index selection by the MySQL query
optimizer could sometimes depend on the compiler version and
optimization flags used to build the server binary.
The problem was a result of a known issue with floating point
calculations on x86: since internal FPU precision (80 bit)
differs from precision used by programs (32-bit float or 64-bit
double), the result of calculating a complex expression may
depend on how FPU registers are allocated by the compiler and
whether intermediate values are spilled from FPU to memory. In
this particular case compiler versions and optimization flags
had an effect on cost calculation when choosing the best index
in best_access_path().
A possible solution to this problem which has already been
implemented in mysql-trunk is to limit FPU internal precision
to 64 bits. So the fix is a backport of the relevant code to
5.1 from mysql-trunk.
without FOR UPDATE is causing a lock".
SELECT statements with subqueries referencing InnoDB tables
were acquiring shared locks on rows in these tables when they
were executed in REPEATABLE-READ mode and with statement or
mixed mode binary logging turned on.
This was a regression which were introduced when fixing
bug 39843.
The problem was that for tables belonging to subqueries
parser set TL_READ_DEFAULT as a lock type. In cases when
statement/mixed binary logging at open_tables() time this
type of lock was converted to TL_READ_NO_INSERT lock at
open_tables() time and caused InnoDB engine to acquire
shared locks on reads from these tables. Although in some
cases such behavior was correct (e.g. for subqueries in
DELETE) in case of SELECT it has caused unnecessary locking.
This patch implements minimal version of the fix for the
specific problem described in the bug-report which supposed
to be not too risky for pushing into 5.1 tree.
The 5.5 tree already contains a more appropriate solution
which also addresses other related issues like bug 53921
"Wrong locks for SELECTs used stored functions may lead
to broken SBR".
This patch tries to solve the problem by ensuring that
TL_READ_DEFAULT lock which is set in the parser for
tables participating in subqueries at open_tables()
time is interpreted as TL_READ_NO_INSERT or TL_READ.
TL_READ is used only if we know that this is a SELECT
and that this particular table is not used by a stored
function.
Test coverage is added for both InnoDB and MyISAM.
This patch introduces an "incompatible" change in locking
scheme for subqueries used in SELECT ... FOR UPDATE and
SELECT .. IN SHARE MODE.
In 4.1 (as well as in 5.0 and 5.1 before fix for bug 39843)
the server would use a snapshot InnoDB read for subqueries
in SELECT FOR UPDATE and SELECT .. IN SHARE MODE statements,
regardless of whether the binary log is on or off.
If the user required a different type of read (i.e. locking
read), he/she could request so explicitly by providing FOR
UPDATE/IN SHARE MODE clause for each individual subquery.
The patch for bug 39843 broke this behaviour (which was not
documented or tested), and started to use locking reads for
all subqueries in SELECT ... FOR UPDATE/IN SHARE MODE.
This patch restores 4.1 behaviour.
This patch should be mostly null-merged into 5.5 tree.
There are two problems:
1. In simplify_joins function we calculate table dependencies. If STRAIGHT_JOIN hint
is used for whole SELECT we do not count it and as result some dependendecies
might be lost. It leads to incorrect table order which is returned by
join_tab_cmp_straight() function.
2. make_join_statistics() calculate the transitive closure for relations a particular
JOIN_TAB is 'dependent on'.
We aggregate the dependent table_map of a JOIN_TAB by adding dependencies from other
tables which we depend on. However, this may also cause new dependencies to be
available after we have completed processing a certain JOIN_TAB.
Both these problems affect condition pushdown and as result condition might be pushed
into wrong table which leads to crash or even omitted which leads to wrong result.
The fix:
1. Use modified 'transitive closure' algorithm provided by Ole John Aske
2. Update table dependences in simplify_joins according to
global STRAIGHT_JOIN hint.
Note: the patch also fixes bugs 46091 & 51492
bitmap_is_set(table->read_set, field_index))
UPDATE on an InnoDB table modifying the same index that is used
to satisfy the WHERE condition could trigger a debug assertion
under some circumstances.
Since for engines with the HA_PRIMARY_KEY_IN_READ_INDEX flag
set results of an index scan on a secondary index are appended
by the primary key value, if a query involves only columns from
the primary key and a secondary index, the latter is considered
to be covering.
That tricks mysql_update() to mark for reading only columns
from the secondary index when it does an index scan to retrieve
rows to update in case a part of that key is also being
updated. However, there may be other columns in WHERE that are
part of the primary key, but not the secondary one.
What we actually want to do in this case is to add index
columns to the existing WHERE columns bitmap rather than
replace it.
Some of the test cases reference to binlog position and
these position numbers are written into result explicitly.
It is difficult to maintain if log event format changes.
There are a couple of cases explicit position number appears,
we handle them in different ways
A. 'CHANGE MASTER ...' with MASTER_LOG_POS or/and RELAY_LOG_POS options
Use --replace_result to mask them.
B. 'SHOW BINLOG EVENT ...'
Replaced by show_binlog_events.inc or wait_for_binlog_event.inc.
show_binlog_events.inc file's function is enhanced by given
$binlog_file and $binlog_limit.
C. 'SHOW SLAVE STATUS', 'show_slave_status.inc' and 'show_slave_status2.inc'
For the test cases just care a few items in the result of 'SHOW SLAVE STATUS',
only the items related to each test case are showed.
'show_slave_status.inc' is rebuild, only the given items in $status_items
will be showed.
'check_slave_is_running.inc' and 'check_slave_no_error.inc'
and 'check_slave_param.inc' are auxiliary files helping
to show running status and error information easily.
data directory name command
The check_db_name function has been modified to validate tails of
#mysql50#-prefixed database names for compliance with MySQL 5.0
database name encoding rules (the check_table_name function call
has been reused).
Server crashes on 64bit linux with 'double free or corruption'
message, on 32bit mysql-test-run silently fails on bootstrap
stage. The problem is that FreeState() is called twice
for init_settings struct in _db_end_ function.
The fix is to remove superfluous FreeState() call.
Additional fix:
fixed discrepancy of result file when
debug & valgrind options are enabled
for MTR.
Bug #50087 Interval arithmetic for Event_queue_element is not portable.
Subtraction of two unsigned months yielded a (very large) positive value.
Conversion of this to a signed value was not necessarily well defined.
Solution: do the subtraction on signed values.
ha_myisam::index_first(uchar*)") at assert.c:81
Single-table DELETE crash/assertion similar to single-table
UPDATE bug 14272.
Same resolution as for the bug 14272:
Don't run index scan when we should use quick select.
This could cause failures because there are table handlers (like federated)
that support quick select scanning but do not support index scanning.
for ALTER TABLE, LOAD DATA).
ROW_COUNT is now assigned according to the following rules:
- In my_ok():
- for DML statements: to the number of affected rows;
- for DDL statements: to 0.
- In my_eof(): to -1 to indicate that there was a result set.
We derive this semantics from the JDBC specification, where int
java.sql.Statement.getUpdateCount() is defined to (sic) "return the
current result as an update count; if the result is a ResultSet
object or there are no more results, -1 is returned".
- In my_error(): to -1 to be compatible with the MySQL C API and
MySQL ODBC driver.
- For SIGNAL statements: to 0 per WL#2110 specification. Zero is used
since that's the "default" value of ROW_COUNT in the diagnostics area.
NULL from outer join query
Problem: optimising MIN/MAX() queries without GROUP BY clause
by replacing the aggregate expression with a constant, we may set it
to NULL disregarding the fact that there may be outer joins involved.
Fix: don't replace MIN/MAX() with NULL if there're outer joins.
Note: the fix itself is just
- if (!count)
+ if (!count && !outer_tables)
set to NULL
The rest of the patch eliminates repeated code to improve speed
and for easy maintenance of the code.
update statements
Only SELECT statements report any examined rows in the slow
log. Slow UPDATE, DELETE and INSERT statements report 0 rows
examined, unless the statement has a condition including a
SELECT substatement.
This patch adds counting of examined rows for the UPDATE and
DELETE statements. An INSERT ... VALUES statement will still
not report any rows as examined.
remember range endpoints
The Loose Index Scan optimization keeps track of a sequence
of intervals. For the current interval it maintains the
current interval's endpoints. But the maximum endpoint was
not stored in the SQL layer; rather, it relied on the
storage engine to retain this value in-between reads. By
coincidence this holds for MyISAM and InnoDB. Not for the
partitioning engine, however.
Fixed by making the key values iterator
(QUICK_RANGE_SELECT) keep track of the current maximum endpoint.
This is also more efficient as we save a call through the
handler API in case of open-ended intervals.
The code to calculate endpoints was extracted into
separate methods in QUICK_RANGE_SELECT, and it was possible to
get rid of some code duplication as part of fix.
Conflicts:
Text conflict in mysql-test/r/grant.result
Text conflict in mysql-test/t/grant.test
Text conflict in mysys/mf_loadpath.c
Text conflict in sql/slave.cc
Text conflict in sql/sql_priv.h
Conflicts:
Text conflict in mysql-test/r/explain.result
Text conflict in mysql-test/t/explain.test
Text conflict in sql/net_serv.cc
Text conflict in sql/sp_head.cc
Text conflict in sql/sql_priv.h
truncates text/blob to 766 chars
mysqldump and SELECT ... INTO OUTFILE truncated long BLOB/TEXT
values to size of 766 bytes (MAX_FIELD_WIDTH or 255 * 3 + 1).
The select_export::send_data method has been modified to
reallocate a conversion buffer for long field data.
greedy_search optimizer_search_depth=0
The algorithm inside restore_prev_nj_state failed to
properly update the counters within the NESTED_JOIN
tree. The counter was decremented each time a table in the
node was removed from the QEP, the correct thing to do being
only to decrement it when the last table in the child node
was removed from the plan. This lead to node counters
getting negative values and the plan thus appeared
impossible. An assertion caught this.
Fixed by not recursing up the tree unless the last table in
the join nest node is removed from the plan
The bug happened under the following condition:
- there was a user variable of type REAL, containing NULL value
- there was a table with a NOT_NULL column of any type but REAL, having
default value (or auto increment);
- a row was inserted into the table with the user variable as value.
A warning was emitted here.
The problem was that handling of NULL values of REAL type was not properly
implemented: it didn't expect that REAL NULL value can be assigned to other
data type.
Basically, the problem was that set_field_to_null() was used instead of
set_field_to_null_with_conversions().
The fix is to use the right function, or more generally, to allow conversion of
REAL NULL values to other data types.
Problem:
item->name was NULL for Item_user_var_as_out_param
which made strcmp(something, item->name) crash in the LOAD XML code.
Fix:
- item_func.h: Adding set_name() in constuctor for Item_user_var_as_out_param
- sql_load.cc: Changing the condition in write_execute_load_query_log_event() which
distiguished between Item_user_var_as_out_param and Item_field
from
if (item->name == NULL)
to
if (item->type() == Item::FIELD_ITEM)
- loadxml.result, loadxml.test: adding tests
Problem: after introduction of "WL#2649 Number-to-string conversions"
This query:
SET NAMES cp850; -- Or any other non-latin1 ASCII-based character set
SELECT * FROM t1
WHERE datetime_column='2010-01-01 00:00:00'
started to add extra character set conversion:
SELECT * FROM t1
WHERE CONVERT(datetime_column USING cp850)='2010-01-01 00:00:00';
so index on DATETIME column was not used anymore.
Fix:
avoid convertion of NUMERIC/DATETIME items
(i.e. those with derivation DERIVATION_NUMERIC).
