diff options
Diffstat (limited to 'src/main/jni/sqlite/sqlite3.h')
-rw-r--r-- | src/main/jni/sqlite/sqlite3.h | 7715 |
1 files changed, 0 insertions, 7715 deletions
diff --git a/src/main/jni/sqlite/sqlite3.h b/src/main/jni/sqlite/sqlite3.h deleted file mode 100644 index 07406477d..000000000 --- a/src/main/jni/sqlite/sqlite3.h +++ /dev/null @@ -1,7715 +0,0 @@ -/* -** 2001 September 15 -** -** The author disclaims copyright to this source code. In place of -** a legal notice, here is a blessing: -** -** May you do good and not evil. -** May you find forgiveness for yourself and forgive others. -** May you share freely, never taking more than you give. -** -************************************************************************* -** This header file defines the interface that the SQLite library -** presents to client programs. If a C-function, structure, datatype, -** or constant definition does not appear in this file, then it is -** not a published API of SQLite, is subject to change without -** notice, and should not be referenced by programs that use SQLite. -** -** Some of the definitions that are in this file are marked as -** "experimental". Experimental interfaces are normally new -** features recently added to SQLite. We do not anticipate changes -** to experimental interfaces but reserve the right to make minor changes -** if experience from use "in the wild" suggest such changes are prudent. -** -** The official C-language API documentation for SQLite is derived -** from comments in this file. This file is the authoritative source -** on how SQLite interfaces are suppose to operate. -** -** The name of this file under configuration management is "sqlite.h.in". -** The makefile makes some minor changes to this file (such as inserting -** the version number) and changes its name to "sqlite3.h" as -** part of the build process. -*/ -#ifndef _SQLITE3_H_ -#define _SQLITE3_H_ -#include <stdarg.h> /* Needed for the definition of va_list */ - -/* -** Make sure we can call this stuff from C++. -*/ -#ifdef __cplusplus -extern "C" { -#endif - - -/* -** Add the ability to override 'extern' -*/ -#ifndef SQLITE_EXTERN -# define SQLITE_EXTERN extern -#endif - -#ifndef SQLITE_API -# define SQLITE_API -#endif - - -/* -** These no-op macros are used in front of interfaces to mark those -** interfaces as either deprecated or experimental. New applications -** should not use deprecated interfaces - they are supported for backwards -** compatibility only. Application writers should be aware that -** experimental interfaces are subject to change in point releases. -** -** These macros used to resolve to various kinds of compiler magic that -** would generate warning messages when they were used. But that -** compiler magic ended up generating such a flurry of bug reports -** that we have taken it all out and gone back to using simple -** noop macros. -*/ -#define SQLITE_DEPRECATED -#define SQLITE_EXPERIMENTAL - -/* -** Ensure these symbols were not defined by some previous header file. -*/ -#ifdef SQLITE_VERSION -# undef SQLITE_VERSION -#endif -#ifdef SQLITE_VERSION_NUMBER -# undef SQLITE_VERSION_NUMBER -#endif - -/* -** CAPI3REF: Compile-Time Library Version Numbers -** -** ^(The [SQLITE_VERSION] C preprocessor macro in the sqlite3.h header -** evaluates to a string literal that is the SQLite version in the -** format "X.Y.Z" where X is the major version number (always 3 for -** SQLite3) and Y is the minor version number and Z is the release number.)^ -** ^(The [SQLITE_VERSION_NUMBER] C preprocessor macro resolves to an integer -** with the value (X*1000000 + Y*1000 + Z) where X, Y, and Z are the same -** numbers used in [SQLITE_VERSION].)^ -** The SQLITE_VERSION_NUMBER for any given release of SQLite will also -** be larger than the release from which it is derived. Either Y will -** be held constant and Z will be incremented or else Y will be incremented -** and Z will be reset to zero. -** -** Since version 3.6.18, SQLite source code has been stored in the -** <a href="http://www.fossil-scm.org/">Fossil configuration management -** system</a>. ^The SQLITE_SOURCE_ID macro evaluates to -** a string which identifies a particular check-in of SQLite -** within its configuration management system. ^The SQLITE_SOURCE_ID -** string contains the date and time of the check-in (UTC) and an SHA1 -** hash of the entire source tree. -** -** See also: [sqlite3_libversion()], -** [sqlite3_libversion_number()], [sqlite3_sourceid()], -** [sqlite_version()] and [sqlite_source_id()]. -*/ -#define SQLITE_VERSION "3.8.8.1" -#define SQLITE_VERSION_NUMBER 3008008 -#define SQLITE_SOURCE_ID "2015-01-20 16:51:25 f73337e3e289915a76ca96e7a05a1a8d4e890d55" - -/* -** CAPI3REF: Run-Time Library Version Numbers -** KEYWORDS: sqlite3_version, sqlite3_sourceid -** -** These interfaces provide the same information as the [SQLITE_VERSION], -** [SQLITE_VERSION_NUMBER], and [SQLITE_SOURCE_ID] C preprocessor macros -** but are associated with the library instead of the header file. ^(Cautious -** programmers might include assert() statements in their application to -** verify that values returned by these interfaces match the macros in -** the header, and thus insure that the application is -** compiled with matching library and header files. -** -** <blockquote><pre> -** assert( sqlite3_libversion_number()==SQLITE_VERSION_NUMBER ); -** assert( strcmp(sqlite3_sourceid(),SQLITE_SOURCE_ID)==0 ); -** assert( strcmp(sqlite3_libversion(),SQLITE_VERSION)==0 ); -** </pre></blockquote>)^ -** -** ^The sqlite3_version[] string constant contains the text of [SQLITE_VERSION] -** macro. ^The sqlite3_libversion() function returns a pointer to the -** to the sqlite3_version[] string constant. The sqlite3_libversion() -** function is provided for use in DLLs since DLL users usually do not have -** direct access to string constants within the DLL. ^The -** sqlite3_libversion_number() function returns an integer equal to -** [SQLITE_VERSION_NUMBER]. ^The sqlite3_sourceid() function returns -** a pointer to a string constant whose value is the same as the -** [SQLITE_SOURCE_ID] C preprocessor macro. -** -** See also: [sqlite_version()] and [sqlite_source_id()]. -*/ -SQLITE_API SQLITE_EXTERN const char sqlite3_version[]; -SQLITE_API const char *sqlite3_libversion(void); -SQLITE_API const char *sqlite3_sourceid(void); -SQLITE_API int sqlite3_libversion_number(void); - -/* -** CAPI3REF: Run-Time Library Compilation Options Diagnostics -** -** ^The sqlite3_compileoption_used() function returns 0 or 1 -** indicating whether the specified option was defined at -** compile time. ^The SQLITE_ prefix may be omitted from the -** option name passed to sqlite3_compileoption_used(). -** -** ^The sqlite3_compileoption_get() function allows iterating -** over the list of options that were defined at compile time by -** returning the N-th compile time option string. ^If N is out of range, -** sqlite3_compileoption_get() returns a NULL pointer. ^The SQLITE_ -** prefix is omitted from any strings returned by -** sqlite3_compileoption_get(). -** -** ^Support for the diagnostic functions sqlite3_compileoption_used() -** and sqlite3_compileoption_get() may be omitted by specifying the -** [SQLITE_OMIT_COMPILEOPTION_DIAGS] option at compile time. -** -** See also: SQL functions [sqlite_compileoption_used()] and -** [sqlite_compileoption_get()] and the [compile_options pragma]. -*/ -#ifndef SQLITE_OMIT_COMPILEOPTION_DIAGS -SQLITE_API int sqlite3_compileoption_used(const char *zOptName); -SQLITE_API const char *sqlite3_compileoption_get(int N); -#endif - -/* -** CAPI3REF: Test To See If The Library Is Threadsafe -** -** ^The sqlite3_threadsafe() function returns zero if and only if -** SQLite was compiled with mutexing code omitted due to the -** [SQLITE_THREADSAFE] compile-time option being set to 0. -** -** SQLite can be compiled with or without mutexes. When -** the [SQLITE_THREADSAFE] C preprocessor macro is 1 or 2, mutexes -** are enabled and SQLite is threadsafe. When the -** [SQLITE_THREADSAFE] macro is 0, -** the mutexes are omitted. Without the mutexes, it is not safe -** to use SQLite concurrently from more than one thread. -** -** Enabling mutexes incurs a measurable performance penalty. -** So if speed is of utmost importance, it makes sense to disable -** the mutexes. But for maximum safety, mutexes should be enabled. -** ^The default behavior is for mutexes to be enabled. -** -** This interface can be used by an application to make sure that the -** version of SQLite that it is linking against was compiled with -** the desired setting of the [SQLITE_THREADSAFE] macro. -** -** This interface only reports on the compile-time mutex setting -** of the [SQLITE_THREADSAFE] flag. If SQLite is compiled with -** SQLITE_THREADSAFE=1 or =2 then mutexes are enabled by default but -** can be fully or partially disabled using a call to [sqlite3_config()] -** with the verbs [SQLITE_CONFIG_SINGLETHREAD], [SQLITE_CONFIG_MULTITHREAD], -** or [SQLITE_CONFIG_SERIALIZED]. ^(The return value of the -** sqlite3_threadsafe() function shows only the compile-time setting of -** thread safety, not any run-time changes to that setting made by -** sqlite3_config(). In other words, the return value from sqlite3_threadsafe() -** is unchanged by calls to sqlite3_config().)^ -** -** See the [threading mode] documentation for additional information. -*/ -SQLITE_API int sqlite3_threadsafe(void); - -/* -** CAPI3REF: Database Connection Handle -** KEYWORDS: {database connection} {database connections} -** -** Each open SQLite database is represented by a pointer to an instance of -** the opaque structure named "sqlite3". It is useful to think of an sqlite3 -** pointer as an object. The [sqlite3_open()], [sqlite3_open16()], and -** [sqlite3_open_v2()] interfaces are its constructors, and [sqlite3_close()] -** and [sqlite3_close_v2()] are its destructors. There are many other -** interfaces (such as -** [sqlite3_prepare_v2()], [sqlite3_create_function()], and -** [sqlite3_busy_timeout()] to name but three) that are methods on an -** sqlite3 object. -*/ -typedef struct sqlite3 sqlite3; - -/* -** CAPI3REF: 64-Bit Integer Types -** KEYWORDS: sqlite_int64 sqlite_uint64 -** -** Because there is no cross-platform way to specify 64-bit integer types -** SQLite includes typedefs for 64-bit signed and unsigned integers. -** -** The sqlite3_int64 and sqlite3_uint64 are the preferred type definitions. -** The sqlite_int64 and sqlite_uint64 types are supported for backwards -** compatibility only. -** -** ^The sqlite3_int64 and sqlite_int64 types can store integer values -** between -9223372036854775808 and +9223372036854775807 inclusive. ^The -** sqlite3_uint64 and sqlite_uint64 types can store integer values -** between 0 and +18446744073709551615 inclusive. -*/ -#ifdef SQLITE_INT64_TYPE - typedef SQLITE_INT64_TYPE sqlite_int64; - typedef unsigned SQLITE_INT64_TYPE sqlite_uint64; -#elif defined(_MSC_VER) || defined(__BORLANDC__) - typedef __int64 sqlite_int64; - typedef unsigned __int64 sqlite_uint64; -#else - typedef long long int sqlite_int64; - typedef unsigned long long int sqlite_uint64; -#endif -typedef sqlite_int64 sqlite3_int64; -typedef sqlite_uint64 sqlite3_uint64; - -/* -** If compiling for a processor that lacks floating point support, -** substitute integer for floating-point. -*/ -#ifdef SQLITE_OMIT_FLOATING_POINT -# define double sqlite3_int64 -#endif - -/* -** CAPI3REF: Closing A Database Connection -** -** ^The sqlite3_close() and sqlite3_close_v2() routines are destructors -** for the [sqlite3] object. -** ^Calls to sqlite3_close() and sqlite3_close_v2() return [SQLITE_OK] if -** the [sqlite3] object is successfully destroyed and all associated -** resources are deallocated. -** -** ^If the database connection is associated with unfinalized prepared -** statements or unfinished sqlite3_backup objects then sqlite3_close() -** will leave the database connection open and return [SQLITE_BUSY]. -** ^If sqlite3_close_v2() is called with unfinalized prepared statements -** and/or unfinished sqlite3_backups, then the database connection becomes -** an unusable "zombie" which will automatically be deallocated when the -** last prepared statement is finalized or the last sqlite3_backup is -** finished. The sqlite3_close_v2() interface is intended for use with -** host languages that are garbage collected, and where the order in which -** destructors are called is arbitrary. -** -** Applications should [sqlite3_finalize | finalize] all [prepared statements], -** [sqlite3_blob_close | close] all [BLOB handles], and -** [sqlite3_backup_finish | finish] all [sqlite3_backup] objects associated -** with the [sqlite3] object prior to attempting to close the object. ^If -** sqlite3_close_v2() is called on a [database connection] that still has -** outstanding [prepared statements], [BLOB handles], and/or -** [sqlite3_backup] objects then it returns [SQLITE_OK] and the deallocation -** of resources is deferred until all [prepared statements], [BLOB handles], -** and [sqlite3_backup] objects are also destroyed. -** -** ^If an [sqlite3] object is destroyed while a transaction is open, -** the transaction is automatically rolled back. -** -** The C parameter to [sqlite3_close(C)] and [sqlite3_close_v2(C)] -** must be either a NULL -** pointer or an [sqlite3] object pointer obtained -** from [sqlite3_open()], [sqlite3_open16()], or -** [sqlite3_open_v2()], and not previously closed. -** ^Calling sqlite3_close() or sqlite3_close_v2() with a NULL pointer -** argument is a harmless no-op. -*/ -SQLITE_API int sqlite3_close(sqlite3*); -SQLITE_API int sqlite3_close_v2(sqlite3*); - -/* -** The type for a callback function. -** This is legacy and deprecated. It is included for historical -** compatibility and is not documented. -*/ -typedef int (*sqlite3_callback)(void*,int,char**, char**); - -/* -** CAPI3REF: One-Step Query Execution Interface -** -** The sqlite3_exec() interface is a convenience wrapper around -** [sqlite3_prepare_v2()], [sqlite3_step()], and [sqlite3_finalize()], -** that allows an application to run multiple statements of SQL -** without having to use a lot of C code. -** -** ^The sqlite3_exec() interface runs zero or more UTF-8 encoded, -** semicolon-separate SQL statements passed into its 2nd argument, -** in the context of the [database connection] passed in as its 1st -** argument. ^If the callback function of the 3rd argument to -** sqlite3_exec() is not NULL, then it is invoked for each result row -** coming out of the evaluated SQL statements. ^The 4th argument to -** sqlite3_exec() is relayed through to the 1st argument of each -** callback invocation. ^If the callback pointer to sqlite3_exec() -** is NULL, then no callback is ever invoked and result rows are -** ignored. -** -** ^If an error occurs while evaluating the SQL statements passed into -** sqlite3_exec(), then execution of the current statement stops and -** subsequent statements are skipped. ^If the 5th parameter to sqlite3_exec() -** is not NULL then any error message is written into memory obtained -** from [sqlite3_malloc()] and passed back through the 5th parameter. -** To avoid memory leaks, the application should invoke [sqlite3_free()] -** on error message strings returned through the 5th parameter of -** of sqlite3_exec() after the error message string is no longer needed. -** ^If the 5th parameter to sqlite3_exec() is not NULL and no errors -** occur, then sqlite3_exec() sets the pointer in its 5th parameter to -** NULL before returning. -** -** ^If an sqlite3_exec() callback returns non-zero, the sqlite3_exec() -** routine returns SQLITE_ABORT without invoking the callback again and -** without running any subsequent SQL statements. -** -** ^The 2nd argument to the sqlite3_exec() callback function is the -** number of columns in the result. ^The 3rd argument to the sqlite3_exec() -** callback is an array of pointers to strings obtained as if from -** [sqlite3_column_text()], one for each column. ^If an element of a -** result row is NULL then the corresponding string pointer for the -** sqlite3_exec() callback is a NULL pointer. ^The 4th argument to the -** sqlite3_exec() callback is an array of pointers to strings where each -** entry represents the name of corresponding result column as obtained -** from [sqlite3_column_name()]. -** -** ^If the 2nd parameter to sqlite3_exec() is a NULL pointer, a pointer -** to an empty string, or a pointer that contains only whitespace and/or -** SQL comments, then no SQL statements are evaluated and the database -** is not changed. -** -** Restrictions: -** -** <ul> -** <li> The application must insure that the 1st parameter to sqlite3_exec() -** is a valid and open [database connection]. -** <li> The application must not close the [database connection] specified by -** the 1st parameter to sqlite3_exec() while sqlite3_exec() is running. -** <li> The application must not modify the SQL statement text passed into -** the 2nd parameter of sqlite3_exec() while sqlite3_exec() is running. -** </ul> -*/ -SQLITE_API int sqlite3_exec( - sqlite3*, /* An open database */ - const char *sql, /* SQL to be evaluated */ - int (*callback)(void*,int,char**,char**), /* Callback function */ - void *, /* 1st argument to callback */ - char **errmsg /* Error msg written here */ -); - -/* -** CAPI3REF: Result Codes -** KEYWORDS: {result code definitions} -** -** Many SQLite functions return an integer result code from the set shown -** here in order to indicate success or failure. -** -** New error codes may be added in future versions of SQLite. -** -** See also: [extended result code definitions] -*/ -#define SQLITE_OK 0 /* Successful result */ -/* beginning-of-error-codes */ -#define SQLITE_ERROR 1 /* SQL error or missing database */ -#define SQLITE_INTERNAL 2 /* Internal logic error in SQLite */ -#define SQLITE_PERM 3 /* Access permission denied */ -#define SQLITE_ABORT 4 /* Callback routine requested an abort */ -#define SQLITE_BUSY 5 /* The database file is locked */ -#define SQLITE_LOCKED 6 /* A table in the database is locked */ -#define SQLITE_NOMEM 7 /* A malloc() failed */ -#define SQLITE_READONLY 8 /* Attempt to write a readonly database */ -#define SQLITE_INTERRUPT 9 /* Operation terminated by sqlite3_interrupt()*/ -#define SQLITE_IOERR 10 /* Some kind of disk I/O error occurred */ -#define SQLITE_CORRUPT 11 /* The database disk image is malformed */ -#define SQLITE_NOTFOUND 12 /* Unknown opcode in sqlite3_file_control() */ -#define SQLITE_FULL 13 /* Insertion failed because database is full */ -#define SQLITE_CANTOPEN 14 /* Unable to open the database file */ -#define SQLITE_PROTOCOL 15 /* Database lock protocol error */ -#define SQLITE_EMPTY 16 /* Database is empty */ -#define SQLITE_SCHEMA 17 /* The database schema changed */ -#define SQLITE_TOOBIG 18 /* String or BLOB exceeds size limit */ -#define SQLITE_CONSTRAINT 19 /* Abort due to constraint violation */ -#define SQLITE_MISMATCH 20 /* Data type mismatch */ -#define SQLITE_MISUSE 21 /* Library used incorrectly */ -#define SQLITE_NOLFS 22 /* Uses OS features not supported on host */ -#define SQLITE_AUTH 23 /* Authorization denied */ -#define SQLITE_FORMAT 24 /* Auxiliary database format error */ -#define SQLITE_RANGE 25 /* 2nd parameter to sqlite3_bind out of range */ -#define SQLITE_NOTADB 26 /* File opened that is not a database file */ -#define SQLITE_NOTICE 27 /* Notifications from sqlite3_log() */ -#define SQLITE_WARNING 28 /* Warnings from sqlite3_log() */ -#define SQLITE_ROW 100 /* sqlite3_step() has another row ready */ -#define SQLITE_DONE 101 /* sqlite3_step() has finished executing */ -/* end-of-error-codes */ - -/* -** CAPI3REF: Extended Result Codes -** KEYWORDS: {extended result code definitions} -** -** In its default configuration, SQLite API routines return one of 30 integer -** [result codes]. However, experience has shown that many of -** these result codes are too coarse-grained. They do not provide as -** much information about problems as programmers might like. In an effort to -** address this, newer versions of SQLite (version 3.3.8 and later) include -** support for additional result codes that provide more detailed information -** about errors. These [extended result codes] are enabled or disabled -** on a per database connection basis using the -** [sqlite3_extended_result_codes()] API. Or, the extended code for -** the most recent error can be obtained using -** [sqlite3_extended_errcode()]. -*/ -#define SQLITE_IOERR_READ (SQLITE_IOERR | (1<<8)) -#define SQLITE_IOERR_SHORT_READ (SQLITE_IOERR | (2<<8)) -#define SQLITE_IOERR_WRITE (SQLITE_IOERR | (3<<8)) -#define SQLITE_IOERR_FSYNC (SQLITE_IOERR | (4<<8)) -#define SQLITE_IOERR_DIR_FSYNC (SQLITE_IOERR | (5<<8)) -#define SQLITE_IOERR_TRUNCATE (SQLITE_IOERR | (6<<8)) -#define SQLITE_IOERR_FSTAT (SQLITE_IOERR | (7<<8)) -#define SQLITE_IOERR_UNLOCK (SQLITE_IOERR | (8<<8)) -#define SQLITE_IOERR_RDLOCK (SQLITE_IOERR | (9<<8)) -#define SQLITE_IOERR_DELETE (SQLITE_IOERR | (10<<8)) -#define SQLITE_IOERR_BLOCKED (SQLITE_IOERR | (11<<8)) -#define SQLITE_IOERR_NOMEM (SQLITE_IOERR | (12<<8)) -#define SQLITE_IOERR_ACCESS (SQLITE_IOERR | (13<<8)) -#define SQLITE_IOERR_CHECKRESERVEDLOCK (SQLITE_IOERR | (14<<8)) -#define SQLITE_IOERR_LOCK (SQLITE_IOERR | (15<<8)) -#define SQLITE_IOERR_CLOSE (SQLITE_IOERR | (16<<8)) -#define SQLITE_IOERR_DIR_CLOSE (SQLITE_IOERR | (17<<8)) -#define SQLITE_IOERR_SHMOPEN (SQLITE_IOERR | (18<<8)) -#define SQLITE_IOERR_SHMSIZE (SQLITE_IOERR | (19<<8)) -#define SQLITE_IOERR_SHMLOCK (SQLITE_IOERR | (20<<8)) -#define SQLITE_IOERR_SHMMAP (SQLITE_IOERR | (21<<8)) -#define SQLITE_IOERR_SEEK (SQLITE_IOERR | (22<<8)) -#define SQLITE_IOERR_DELETE_NOENT (SQLITE_IOERR | (23<<8)) -#define SQLITE_IOERR_MMAP (SQLITE_IOERR | (24<<8)) -#define SQLITE_IOERR_GETTEMPPATH (SQLITE_IOERR | (25<<8)) -#define SQLITE_IOERR_CONVPATH (SQLITE_IOERR | (26<<8)) -#define SQLITE_LOCKED_SHAREDCACHE (SQLITE_LOCKED | (1<<8)) -#define SQLITE_BUSY_RECOVERY (SQLITE_BUSY | (1<<8)) -#define SQLITE_BUSY_SNAPSHOT (SQLITE_BUSY | (2<<8)) -#define SQLITE_CANTOPEN_NOTEMPDIR (SQLITE_CANTOPEN | (1<<8)) -#define SQLITE_CANTOPEN_ISDIR (SQLITE_CANTOPEN | (2<<8)) -#define SQLITE_CANTOPEN_FULLPATH (SQLITE_CANTOPEN | (3<<8)) -#define SQLITE_CANTOPEN_CONVPATH (SQLITE_CANTOPEN | (4<<8)) -#define SQLITE_CORRUPT_VTAB (SQLITE_CORRUPT | (1<<8)) -#define SQLITE_READONLY_RECOVERY (SQLITE_READONLY | (1<<8)) -#define SQLITE_READONLY_CANTLOCK (SQLITE_READONLY | (2<<8)) -#define SQLITE_READONLY_ROLLBACK (SQLITE_READONLY | (3<<8)) -#define SQLITE_READONLY_DBMOVED (SQLITE_READONLY | (4<<8)) -#define SQLITE_ABORT_ROLLBACK (SQLITE_ABORT | (2<<8)) -#define SQLITE_CONSTRAINT_CHECK (SQLITE_CONSTRAINT | (1<<8)) -#define SQLITE_CONSTRAINT_COMMITHOOK (SQLITE_CONSTRAINT | (2<<8)) -#define SQLITE_CONSTRAINT_FOREIGNKEY (SQLITE_CONSTRAINT | (3<<8)) -#define SQLITE_CONSTRAINT_FUNCTION (SQLITE_CONSTRAINT | (4<<8)) -#define SQLITE_CONSTRAINT_NOTNULL (SQLITE_CONSTRAINT | (5<<8)) -#define SQLITE_CONSTRAINT_PRIMARYKEY (SQLITE_CONSTRAINT | (6<<8)) -#define SQLITE_CONSTRAINT_TRIGGER (SQLITE_CONSTRAINT | (7<<8)) -#define SQLITE_CONSTRAINT_UNIQUE (SQLITE_CONSTRAINT | (8<<8)) -#define SQLITE_CONSTRAINT_VTAB (SQLITE_CONSTRAINT | (9<<8)) -#define SQLITE_CONSTRAINT_ROWID (SQLITE_CONSTRAINT |(10<<8)) -#define SQLITE_NOTICE_RECOVER_WAL (SQLITE_NOTICE | (1<<8)) -#define SQLITE_NOTICE_RECOVER_ROLLBACK (SQLITE_NOTICE | (2<<8)) -#define SQLITE_WARNING_AUTOINDEX (SQLITE_WARNING | (1<<8)) -#define SQLITE_AUTH_USER (SQLITE_AUTH | (1<<8)) - -/* -** CAPI3REF: Flags For File Open Operations -** -** These bit values are intended for use in the -** 3rd parameter to the [sqlite3_open_v2()] interface and -** in the 4th parameter to the [sqlite3_vfs.xOpen] method. -*/ -#define SQLITE_OPEN_READONLY 0x00000001 /* Ok for sqlite3_open_v2() */ -#define SQLITE_OPEN_READWRITE 0x00000002 /* Ok for sqlite3_open_v2() */ -#define SQLITE_OPEN_CREATE 0x00000004 /* Ok for sqlite3_open_v2() */ -#define SQLITE_OPEN_DELETEONCLOSE 0x00000008 /* VFS only */ -#define SQLITE_OPEN_EXCLUSIVE 0x00000010 /* VFS only */ -#define SQLITE_OPEN_AUTOPROXY 0x00000020 /* VFS only */ -#define SQLITE_OPEN_URI 0x00000040 /* Ok for sqlite3_open_v2() */ -#define SQLITE_OPEN_MEMORY 0x00000080 /* Ok for sqlite3_open_v2() */ -#define SQLITE_OPEN_MAIN_DB 0x00000100 /* VFS only */ -#define SQLITE_OPEN_TEMP_DB 0x00000200 /* VFS only */ -#define SQLITE_OPEN_TRANSIENT_DB 0x00000400 /* VFS only */ -#define SQLITE_OPEN_MAIN_JOURNAL 0x00000800 /* VFS only */ -#define SQLITE_OPEN_TEMP_JOURNAL 0x00001000 /* VFS only */ -#define SQLITE_OPEN_SUBJOURNAL 0x00002000 /* VFS only */ -#define SQLITE_OPEN_MASTER_JOURNAL 0x00004000 /* VFS only */ -#define SQLITE_OPEN_NOMUTEX 0x00008000 /* Ok for sqlite3_open_v2() */ -#define SQLITE_OPEN_FULLMUTEX 0x00010000 /* Ok for sqlite3_open_v2() */ -#define SQLITE_OPEN_SHAREDCACHE 0x00020000 /* Ok for sqlite3_open_v2() */ -#define SQLITE_OPEN_PRIVATECACHE 0x00040000 /* Ok for sqlite3_open_v2() */ -#define SQLITE_OPEN_WAL 0x00080000 /* VFS only */ - -/* Reserved: 0x00F00000 */ - -/* -** CAPI3REF: Device Characteristics -** -** The xDeviceCharacteristics method of the [sqlite3_io_methods] -** object returns an integer which is a vector of these -** bit values expressing I/O characteristics of the mass storage -** device that holds the file that the [sqlite3_io_methods] -** refers to. -** -** The SQLITE_IOCAP_ATOMIC property means that all writes of -** any size are atomic. The SQLITE_IOCAP_ATOMICnnn values -** mean that writes of blocks that are nnn bytes in size and -** are aligned to an address which is an integer multiple of -** nnn are atomic. The SQLITE_IOCAP_SAFE_APPEND value means -** that when data is appended to a file, the data is appended -** first then the size of the file is extended, never the other -** way around. The SQLITE_IOCAP_SEQUENTIAL property means that -** information is written to disk in the same order as calls -** to xWrite(). The SQLITE_IOCAP_POWERSAFE_OVERWRITE property means that -** after reboot following a crash or power loss, the only bytes in a -** file that were written at the application level might have changed -** and that adjacent bytes, even bytes within the same sector are -** guaranteed to be unchanged. The SQLITE_IOCAP_UNDELETABLE_WHEN_OPEN -** flag indicate that a file cannot be deleted when open. The -** SQLITE_IOCAP_IMMUTABLE flag indicates that the file is on -** read-only media and cannot be changed even by processes with -** elevated privileges. -*/ -#define SQLITE_IOCAP_ATOMIC 0x00000001 -#define SQLITE_IOCAP_ATOMIC512 0x00000002 -#define SQLITE_IOCAP_ATOMIC1K 0x00000004 -#define SQLITE_IOCAP_ATOMIC2K 0x00000008 -#define SQLITE_IOCAP_ATOMIC4K 0x00000010 -#define SQLITE_IOCAP_ATOMIC8K 0x00000020 -#define SQLITE_IOCAP_ATOMIC16K 0x00000040 -#define SQLITE_IOCAP_ATOMIC32K 0x00000080 -#define SQLITE_IOCAP_ATOMIC64K 0x00000100 -#define SQLITE_IOCAP_SAFE_APPEND 0x00000200 -#define SQLITE_IOCAP_SEQUENTIAL 0x00000400 -#define SQLITE_IOCAP_UNDELETABLE_WHEN_OPEN 0x00000800 -#define SQLITE_IOCAP_POWERSAFE_OVERWRITE 0x00001000 -#define SQLITE_IOCAP_IMMUTABLE 0x00002000 - -/* -** CAPI3REF: File Locking Levels -** -** SQLite uses one of these integer values as the second -** argument to calls it makes to the xLock() and xUnlock() methods -** of an [sqlite3_io_methods] object. -*/ -#define SQLITE_LOCK_NONE 0 -#define SQLITE_LOCK_SHARED 1 -#define SQLITE_LOCK_RESERVED 2 -#define SQLITE_LOCK_PENDING 3 -#define SQLITE_LOCK_EXCLUSIVE 4 - -/* -** CAPI3REF: Synchronization Type Flags -** -** When SQLite invokes the xSync() method of an -** [sqlite3_io_methods] object it uses a combination of -** these integer values as the second argument. -** -** When the SQLITE_SYNC_DATAONLY flag is used, it means that the -** sync operation only needs to flush data to mass storage. Inode -** information need not be flushed. If the lower four bits of the flag -** equal SQLITE_SYNC_NORMAL, that means to use normal fsync() semantics. -** If the lower four bits equal SQLITE_SYNC_FULL, that means -** to use Mac OS X style fullsync instead of fsync(). -** -** Do not confuse the SQLITE_SYNC_NORMAL and SQLITE_SYNC_FULL flags -** with the [PRAGMA synchronous]=NORMAL and [PRAGMA synchronous]=FULL -** settings. The [synchronous pragma] determines when calls to the -** xSync VFS method occur and applies uniformly across all platforms. -** The SQLITE_SYNC_NORMAL and SQLITE_SYNC_FULL flags determine how -** energetic or rigorous or forceful the sync operations are and -** only make a difference on Mac OSX for the default SQLite code. -** (Third-party VFS implementations might also make the distinction -** between SQLITE_SYNC_NORMAL and SQLITE_SYNC_FULL, but among the -** operating systems natively supported by SQLite, only Mac OSX -** cares about the difference.) -*/ -#define SQLITE_SYNC_NORMAL 0x00002 -#define SQLITE_SYNC_FULL 0x00003 -#define SQLITE_SYNC_DATAONLY 0x00010 - -/* -** CAPI3REF: OS Interface Open File Handle -** -** An [sqlite3_file] object represents an open file in the -** [sqlite3_vfs | OS interface layer]. Individual OS interface -** implementations will -** want to subclass this object by appending additional fields -** for their own use. The pMethods entry is a pointer to an -** [sqlite3_io_methods] object that defines methods for performing -** I/O operations on the open file. -*/ -typedef struct sqlite3_file sqlite3_file; -struct sqlite3_file { - const struct sqlite3_io_methods *pMethods; /* Methods for an open file */ -}; - -/* -** CAPI3REF: OS Interface File Virtual Methods Object -** -** Every file opened by the [sqlite3_vfs.xOpen] method populates an -** [sqlite3_file] object (or, more commonly, a subclass of the -** [sqlite3_file] object) with a pointer to an instance of this object. -** This object defines the methods used to perform various operations -** against the open file represented by the [sqlite3_file] object. -** -** If the [sqlite3_vfs.xOpen] method sets the sqlite3_file.pMethods element -** to a non-NULL pointer, then the sqlite3_io_methods.xClose method -** may be invoked even if the [sqlite3_vfs.xOpen] reported that it failed. The -** only way to prevent a call to xClose following a failed [sqlite3_vfs.xOpen] -** is for the [sqlite3_vfs.xOpen] to set the sqlite3_file.pMethods element -** to NULL. -** -** The flags argument to xSync may be one of [SQLITE_SYNC_NORMAL] or -** [SQLITE_SYNC_FULL]. The first choice is the normal fsync(). -** The second choice is a Mac OS X style fullsync. The [SQLITE_SYNC_DATAONLY] -** flag may be ORed in to indicate that only the data of the file -** and not its inode needs to be synced. -** -** The integer values to xLock() and xUnlock() are one of -** <ul> -** <li> [SQLITE_LOCK_NONE], -** <li> [SQLITE_LOCK_SHARED], -** <li> [SQLITE_LOCK_RESERVED], -** <li> [SQLITE_LOCK_PENDING], or -** <li> [SQLITE_LOCK_EXCLUSIVE]. -** </ul> -** xLock() increases the lock. xUnlock() decreases the lock. -** The xCheckReservedLock() method checks whether any database connection, -** either in this process or in some other process, is holding a RESERVED, -** PENDING, or EXCLUSIVE lock on the file. It returns true -** if such a lock exists and false otherwise. -** -** The xFileControl() method is a generic interface that allows custom -** VFS implementations to directly control an open file using the -** [sqlite3_file_control()] interface. The second "op" argument is an -** integer opcode. The third argument is a generic pointer intended to -** point to a structure that may contain arguments or space in which to -** write return values. Potential uses for xFileControl() might be -** functions to enable blocking locks with timeouts, to change the -** locking strategy (for example to use dot-file locks), to inquire -** about the status of a lock, or to break stale locks. The SQLite -** core reserves all opcodes less than 100 for its own use. -** A [file control opcodes | list of opcodes] less than 100 is available. -** Applications that define a custom xFileControl method should use opcodes -** greater than 100 to avoid conflicts. VFS implementations should -** return [SQLITE_NOTFOUND] for file control opcodes that they do not -** recognize. -** -** The xSectorSize() method returns the sector size of the -** device that underlies the file. The sector size is the -** minimum write that can be performed without disturbing -** other bytes in the file. The xDeviceCharacteristics() -** method returns a bit vector describing behaviors of the -** underlying device: -** -** <ul> -** <li> [SQLITE_IOCAP_ATOMIC] -** <li> [SQLITE_IOCAP_ATOMIC512] -** <li> [SQLITE_IOCAP_ATOMIC1K] -** <li> [SQLITE_IOCAP_ATOMIC2K] -** <li> [SQLITE_IOCAP_ATOMIC4K] -** <li> [SQLITE_IOCAP_ATOMIC8K] -** <li> [SQLITE_IOCAP_ATOMIC16K] -** <li> [SQLITE_IOCAP_ATOMIC32K] -** <li> [SQLITE_IOCAP_ATOMIC64K] -** <li> [SQLITE_IOCAP_SAFE_APPEND] -** <li> [SQLITE_IOCAP_SEQUENTIAL] -** </ul> -** -** The SQLITE_IOCAP_ATOMIC property means that all writes of -** any size are atomic. The SQLITE_IOCAP_ATOMICnnn values -** mean that writes of blocks that are nnn bytes in size and -** are aligned to an address which is an integer multiple of -** nnn are atomic. The SQLITE_IOCAP_SAFE_APPEND value means -** that when data is appended to a file, the data is appended -** first then the size of the file is extended, never the other -** way around. The SQLITE_IOCAP_SEQUENTIAL property means that -** information is written to disk in the same order as calls -** to xWrite(). -** -** If xRead() returns SQLITE_IOERR_SHORT_READ it must also fill -** in the unread portions of the buffer with zeros. A VFS that -** fails to zero-fill short reads might seem to work. However, -** failure to zero-fill short reads will eventually lead to -** database corruption. -*/ -typedef struct sqlite3_io_methods sqlite3_io_methods; -struct sqlite3_io_methods { - int iVersion; - int (*xClose)(sqlite3_file*); - int (*xRead)(sqlite3_file*, void*, int iAmt, sqlite3_int64 iOfst); - int (*xWrite)(sqlite3_file*, const void*, int iAmt, sqlite3_int64 iOfst); - int (*xTruncate)(sqlite3_file*, sqlite3_int64 size); - int (*xSync)(sqlite3_file*, int flags); - int (*xFileSize)(sqlite3_file*, sqlite3_int64 *pSize); - int (*xLock)(sqlite3_file*, int); - int (*xUnlock)(sqlite3_file*, int); - int (*xCheckReservedLock)(sqlite3_file*, int *pResOut); - int (*xFileControl)(sqlite3_file*, int op, void *pArg); - int (*xSectorSize)(sqlite3_file*); - int (*xDeviceCharacteristics)(sqlite3_file*); - /* Methods above are valid for version 1 */ - int (*xShmMap)(sqlite3_file*, int iPg, int pgsz, int, void volatile**); - int (*xShmLock)(sqlite3_file*, int offset, int n, int flags); - void (*xShmBarrier)(sqlite3_file*); - int (*xShmUnmap)(sqlite3_file*, int deleteFlag); - /* Methods above are valid for version 2 */ - int (*xFetch)(sqlite3_file*, sqlite3_int64 iOfst, int iAmt, void **pp); - int (*xUnfetch)(sqlite3_file*, sqlite3_int64 iOfst, void *p); - /* Methods above are valid for version 3 */ - /* Additional methods may be added in future releases */ -}; - -/* -** CAPI3REF: Standard File Control Opcodes -** KEYWORDS: {file control opcodes} {file control opcode} -** -** These integer constants are opcodes for the xFileControl method -** of the [sqlite3_io_methods] object and for the [sqlite3_file_control()] -** interface. -** -** The [SQLITE_FCNTL_LOCKSTATE] opcode is used for debugging. This -** opcode causes the xFileControl method to write the current state of -** the lock (one of [SQLITE_LOCK_NONE], [SQLITE_LOCK_SHARED], -** [SQLITE_LOCK_RESERVED], [SQLITE_LOCK_PENDING], or [SQLITE_LOCK_EXCLUSIVE]) -** into an integer that the pArg argument points to. This capability -** is used during testing and only needs to be supported when SQLITE_TEST -** is defined. -** <ul> -** <li>[[SQLITE_FCNTL_SIZE_HINT]] -** The [SQLITE_FCNTL_SIZE_HINT] opcode is used by SQLite to give the VFS -** layer a hint of how large the database file will grow to be during the -** current transaction. This hint is not guaranteed to be accurate but it -** is often close. The underlying VFS might choose to preallocate database -** file space based on this hint in order to help writes to the database -** file run faster. -** -** <li>[[SQLITE_FCNTL_CHUNK_SIZE]] -** The [SQLITE_FCNTL_CHUNK_SIZE] opcode is used to request that the VFS -** extends and truncates the database file in chunks of a size specified -** by the user. The fourth argument to [sqlite3_file_control()] should -** point to an integer (type int) containing the new chunk-size to use -** for the nominated database. Allocating database file space in large -** chunks (say 1MB at a time), may reduce file-system fragmentation and -** improve performance on some systems. -** -** <li>[[SQLITE_FCNTL_FILE_POINTER]] -** The [SQLITE_FCNTL_FILE_POINTER] opcode is used to obtain a pointer -** to the [sqlite3_file] object associated with a particular database -** connection. See the [sqlite3_file_control()] documentation for -** additional information. -** -** <li>[[SQLITE_FCNTL_SYNC_OMITTED]] -** No longer in use. -** -** <li>[[SQLITE_FCNTL_SYNC]] -** The [SQLITE_FCNTL_SYNC] opcode is generated internally by SQLite and -** sent to the VFS immediately before the xSync method is invoked on a -** database file descriptor. Or, if the xSync method is not invoked -** because the user has configured SQLite with -** [PRAGMA synchronous | PRAGMA synchronous=OFF] it is invoked in place -** of the xSync method. In most cases, the pointer argument passed with -** this file-control is NULL. However, if the database file is being synced -** as part of a multi-database commit, the argument points to a nul-terminated -** string containing the transactions master-journal file name. VFSes that -** do not need this signal should silently ignore this opcode. Applications -** should not call [sqlite3_file_control()] with this opcode as doing so may -** disrupt the operation of the specialized VFSes that do require it. -** -** <li>[[SQLITE_FCNTL_COMMIT_PHASETWO]] -** The [SQLITE_FCNTL_COMMIT_PHASETWO] opcode is generated internally by SQLite -** and sent to the VFS after a transaction has been committed immediately -** but before the database is unlocked. VFSes that do not need this signal -** should silently ignore this opcode. Applications should not call -** [sqlite3_file_control()] with this opcode as doing so may disrupt the -** operation of the specialized VFSes that do require it. -** -** <li>[[SQLITE_FCNTL_WIN32_AV_RETRY]] -** ^The [SQLITE_FCNTL_WIN32_AV_RETRY] opcode is used to configure automatic -** retry counts and intervals for certain disk I/O operations for the -** windows [VFS] in order to provide robustness in the presence of -** anti-virus programs. By default, the windows VFS will retry file read, -** file write, and file delete operations up to 10 times, with a delay -** of 25 milliseconds before the first retry and with the delay increasing -** by an additional 25 milliseconds with each subsequent retry. This -** opcode allows these two values (10 retries and 25 milliseconds of delay) -** to be adjusted. The values are changed for all database connections -** within the same process. The argument is a pointer to an array of two -** integers where the first integer i the new retry count and the second -** integer is the delay. If either integer is negative, then the setting -** is not changed but instead the prior value of that setting is written -** into the array entry, allowing the current retry settings to be -** interrogated. The zDbName parameter is ignored. -** -** <li>[[SQLITE_FCNTL_PERSIST_WAL]] -** ^The [SQLITE_FCNTL_PERSIST_WAL] opcode is used to set or query the -** persistent [WAL | Write Ahead Log] setting. By default, the auxiliary -** write ahead log and shared memory files used for transaction control -** are automatically deleted when the latest connection to the database -** closes. Setting persistent WAL mode causes those files to persist after -** close. Persisting the files is useful when other processes that do not -** have write permission on the directory containing the database file want -** to read the database file, as the WAL and shared memory files must exist -** in order for the database to be readable. The fourth parameter to -** [sqlite3_file_control()] for this opcode should be a pointer to an integer. -** That integer is 0 to disable persistent WAL mode or 1 to enable persistent -** WAL mode. If the integer is -1, then it is overwritten with the current -** WAL persistence setting. -** -** <li>[[SQLITE_FCNTL_POWERSAFE_OVERWRITE]] -** ^The [SQLITE_FCNTL_POWERSAFE_OVERWRITE] opcode is used to set or query the -** persistent "powersafe-overwrite" or "PSOW" setting. The PSOW setting -** determines the [SQLITE_IOCAP_POWERSAFE_OVERWRITE] bit of the -** xDeviceCharacteristics methods. The fourth parameter to -** [sqlite3_file_control()] for this opcode should be a pointer to an integer. -** That integer is 0 to disable zero-damage mode or 1 to enable zero-damage -** mode. If the integer is -1, then it is overwritten with the current -** zero-damage mode setting. -** -** <li>[[SQLITE_FCNTL_OVERWRITE]] -** ^The [SQLITE_FCNTL_OVERWRITE] opcode is invoked by SQLite after opening -** a write transaction to indicate that, unless it is rolled back for some -** reason, the entire database file will be overwritten by the current -** transaction. This is used by VACUUM operations. -** -** <li>[[SQLITE_FCNTL_VFSNAME]] -** ^The [SQLITE_FCNTL_VFSNAME] opcode can be used to obtain the names of -** all [VFSes] in the VFS stack. The names are of all VFS shims and the -** final bottom-level VFS are written into memory obtained from -** [sqlite3_malloc()] and the result is stored in the char* variable -** that the fourth parameter of [sqlite3_file_control()] points to. -** The caller is responsible for freeing the memory when done. As with -** all file-control actions, there is no guarantee that this will actually -** do anything. Callers should initialize the char* variable to a NULL -** pointer in case this file-control is not implemented. This file-control -** is intended for diagnostic use only. -** -** <li>[[SQLITE_FCNTL_PRAGMA]] -** ^Whenever a [PRAGMA] statement is parsed, an [SQLITE_FCNTL_PRAGMA] -** file control is sent to the open [sqlite3_file] object corresponding -** to the database file to which the pragma statement refers. ^The argument -** to the [SQLITE_FCNTL_PRAGMA] file control is an array of -** pointers to strings (char**) in which the second element of the array -** is the name of the pragma and the third element is the argument to the -** pragma or NULL if the pragma has no argument. ^The handler for an -** [SQLITE_FCNTL_PRAGMA] file control can optionally make the first element -** of the char** argument point to a string obtained from [sqlite3_mprintf()] -** or the equivalent and that string will become the result of the pragma or -** the error message if the pragma fails. ^If the -** [SQLITE_FCNTL_PRAGMA] file control returns [SQLITE_NOTFOUND], then normal -** [PRAGMA] processing continues. ^If the [SQLITE_FCNTL_PRAGMA] -** file control returns [SQLITE_OK], then the parser assumes that the -** VFS has handled the PRAGMA itself and the parser generates a no-op -** prepared statement. ^If the [SQLITE_FCNTL_PRAGMA] file control returns -** any result code other than [SQLITE_OK] or [SQLITE_NOTFOUND], that means -** that the VFS encountered an error while handling the [PRAGMA] and the -** compilation of the PRAGMA fails with an error. ^The [SQLITE_FCNTL_PRAGMA] -** file control occurs at the beginning of pragma statement analysis and so -** it is able to override built-in [PRAGMA] statements. -** -** <li>[[SQLITE_FCNTL_BUSYHANDLER]] -** ^The [SQLITE_FCNTL_BUSYHANDLER] -** file-control may be invoked by SQLite on the database file handle -** shortly after it is opened in order to provide a custom VFS with access -** to the connections busy-handler callback. The argument is of type (void **) -** - an array of two (void *) values. The first (void *) actually points -** to a function of type (int (*)(void *)). In order to invoke the connections -** busy-handler, this function should be invoked with the second (void *) in -** the array as the only argument. If it returns non-zero, then the operation -** should be retried. If it returns zero, the custom VFS should abandon the -** current operation. -** -** <li>[[SQLITE_FCNTL_TEMPFILENAME]] -** ^Application can invoke the [SQLITE_FCNTL_TEMPFILENAME] file-control -** to have SQLite generate a -** temporary filename using the same algorithm that is followed to generate -** temporary filenames for TEMP tables and other internal uses. The -** argument should be a char** which will be filled with the filename -** written into memory obtained from [sqlite3_malloc()]. The caller should -** invoke [sqlite3_free()] on the result to avoid a memory leak. -** -** <li>[[SQLITE_FCNTL_MMAP_SIZE]] -** The [SQLITE_FCNTL_MMAP_SIZE] file control is used to query or set the -** maximum number of bytes that will be used for memory-mapped I/O. -** The argument is a pointer to a value of type sqlite3_int64 that -** is an advisory maximum number of bytes in the file to memory map. The -** pointer is overwritten with the old value. The limit is not changed if -** the value originally pointed to is negative, and so the current limit -** can be queried by passing in a pointer to a negative number. This -** file-control is used internally to implement [PRAGMA mmap_size]. -** -** <li>[[SQLITE_FCNTL_TRACE]] -** The [SQLITE_FCNTL_TRACE] file control provides advisory information -** to the VFS about what the higher layers of the SQLite stack are doing. -** This file control is used by some VFS activity tracing [shims]. -** The argument is a zero-terminated string. Higher layers in the -** SQLite stack may generate instances of this file control if -** the [SQLITE_USE_FCNTL_TRACE] compile-time option is enabled. -** -** <li>[[SQLITE_FCNTL_HAS_MOVED]] -** The [SQLITE_FCNTL_HAS_MOVED] file control interprets its argument as a -** pointer to an integer and it writes a boolean into that integer depending -** on whether or not the file has been renamed, moved, or deleted since it -** was first opened. -** -** <li>[[SQLITE_FCNTL_WIN32_SET_HANDLE]] -** The [SQLITE_FCNTL_WIN32_SET_HANDLE] opcode is used for debugging. This -** opcode causes the xFileControl method to swap the file handle with the one -** pointed to by the pArg argument. This capability is used during testing -** and only needs to be supported when SQLITE_TEST is defined. -** -** </ul> -*/ -#define SQLITE_FCNTL_LOCKSTATE 1 -#define SQLITE_GET_LOCKPROXYFILE 2 -#define SQLITE_SET_LOCKPROXYFILE 3 -#define SQLITE_LAST_ERRNO 4 -#define SQLITE_FCNTL_SIZE_HINT 5 -#define SQLITE_FCNTL_CHUNK_SIZE 6 -#define SQLITE_FCNTL_FILE_POINTER 7 -#define SQLITE_FCNTL_SYNC_OMITTED 8 -#define SQLITE_FCNTL_WIN32_AV_RETRY 9 -#define SQLITE_FCNTL_PERSIST_WAL 10 -#define SQLITE_FCNTL_OVERWRITE 11 -#define SQLITE_FCNTL_VFSNAME 12 -#define SQLITE_FCNTL_POWERSAFE_OVERWRITE 13 -#define SQLITE_FCNTL_PRAGMA 14 -#define SQLITE_FCNTL_BUSYHANDLER 15 -#define SQLITE_FCNTL_TEMPFILENAME 16 -#define SQLITE_FCNTL_MMAP_SIZE 18 -#define SQLITE_FCNTL_TRACE 19 -#define SQLITE_FCNTL_HAS_MOVED 20 -#define SQLITE_FCNTL_SYNC 21 -#define SQLITE_FCNTL_COMMIT_PHASETWO 22 -#define SQLITE_FCNTL_WIN32_SET_HANDLE 23 - -/* -** CAPI3REF: Mutex Handle -** -** The mutex module within SQLite defines [sqlite3_mutex] to be an -** abstract type for a mutex object. The SQLite core never looks -** at the internal representation of an [sqlite3_mutex]. It only -** deals with pointers to the [sqlite3_mutex] object. -** -** Mutexes are created using [sqlite3_mutex_alloc()]. -*/ -typedef struct sqlite3_mutex sqlite3_mutex; - -/* -** CAPI3REF: OS Interface Object -** -** An instance of the sqlite3_vfs object defines the interface between -** the SQLite core and the underlying operating system. The "vfs" -** in the name of the object stands for "virtual file system". See -** the [VFS | VFS documentation] for further information. -** -** The value of the iVersion field is initially 1 but may be larger in -** future versions of SQLite. Additional fields may be appended to this -** object when the iVersion value is increased. Note that the structure -** of the sqlite3_vfs object changes in the transaction between -** SQLite version 3.5.9 and 3.6.0 and yet the iVersion field was not -** modified. -** -** The szOsFile field is the size of the subclassed [sqlite3_file] -** structure used by this VFS. mxPathname is the maximum length of -** a pathname in this VFS. -** -** Registered sqlite3_vfs objects are kept on a linked list formed by -** the pNext pointer. The [sqlite3_vfs_register()] -** and [sqlite3_vfs_unregister()] interfaces manage this list -** in a thread-safe way. The [sqlite3_vfs_find()] interface -** searches the list. Neither the application code nor the VFS -** implementation should use the pNext pointer. -** -** The pNext field is the only field in the sqlite3_vfs -** structure that SQLite will ever modify. SQLite will only access -** or modify this field while holding a particular static mutex. -** The application should never modify anything within the sqlite3_vfs -** object once the object has been registered. -** -** The zName field holds the name of the VFS module. The name must -** be unique across all VFS modules. -** -** [[sqlite3_vfs.xOpen]] -** ^SQLite guarantees that the zFilename parameter to xOpen -** is either a NULL pointer or string obtained -** from xFullPathname() with an optional suffix added. -** ^If a suffix is added to the zFilename parameter, it will -** consist of a single "-" character followed by no more than -** 11 alphanumeric and/or "-" characters. -** ^SQLite further guarantees that -** the string will be valid and unchanged until xClose() is -** called. Because of the previous sentence, -** the [sqlite3_file] can safely store a pointer to the -** filename if it needs to remember the filename for some reason. -** If the zFilename parameter to xOpen is a NULL pointer then xOpen -** must invent its own temporary name for the file. ^Whenever the -** xFilename parameter is NULL it will also be the case that the -** flags parameter will include [SQLITE_OPEN_DELETEONCLOSE]. -** -** The flags argument to xOpen() includes all bits set in -** the flags argument to [sqlite3_open_v2()]. Or if [sqlite3_open()] -** or [sqlite3_open16()] is used, then flags includes at least -** [SQLITE_OPEN_READWRITE] | [SQLITE_OPEN_CREATE]. -** If xOpen() opens a file read-only then it sets *pOutFlags to -** include [SQLITE_OPEN_READONLY]. Other bits in *pOutFlags may be set. -** -** ^(SQLite will also add one of the following flags to the xOpen() -** call, depending on the object being opened: -** -** <ul> -** <li> [SQLITE_OPEN_MAIN_DB] -** <li> [SQLITE_OPEN_MAIN_JOURNAL] -** <li> [SQLITE_OPEN_TEMP_DB] -** <li> [SQLITE_OPEN_TEMP_JOURNAL] -** <li> [SQLITE_OPEN_TRANSIENT_DB] -** <li> [SQLITE_OPEN_SUBJOURNAL] -** <li> [SQLITE_OPEN_MASTER_JOURNAL] -** <li> [SQLITE_OPEN_WAL] -** </ul>)^ -** -** The file I/O implementation can use the object type flags to -** change the way it deals with files. For example, an application -** that does not care about crash recovery or rollback might make -** the open of a journal file a no-op. Writes to this journal would -** also be no-ops, and any attempt to read the journal would return -** SQLITE_IOERR. Or the implementation might recognize that a database -** file will be doing page-aligned sector reads and writes in a random -** order and set up its I/O subsystem accordingly. -** -** SQLite might also add one of the following flags to the xOpen method: -** -** <ul> -** <li> [SQLITE_OPEN_DELETEONCLOSE] -** <li> [SQLITE_OPEN_EXCLUSIVE] -** </ul> -** -** The [SQLITE_OPEN_DELETEONCLOSE] flag means the file should be -** deleted when it is closed. ^The [SQLITE_OPEN_DELETEONCLOSE] -** will be set for TEMP databases and their journals, transient -** databases, and subjournals. -** -** ^The [SQLITE_OPEN_EXCLUSIVE] flag is always used in conjunction -** with the [SQLITE_OPEN_CREATE] flag, which are both directly -** analogous to the O_EXCL and O_CREAT flags of the POSIX open() -** API. The SQLITE_OPEN_EXCLUSIVE flag, when paired with the -** SQLITE_OPEN_CREATE, is used to indicate that file should always -** be created, and that it is an error if it already exists. -** It is <i>not</i> used to indicate the file should be opened -** for exclusive access. -** -** ^At least szOsFile bytes of memory are allocated by SQLite -** to hold the [sqlite3_file] structure passed as the third -** argument to xOpen. The xOpen method does not have to -** allocate the structure; it should just fill it in. Note that -** the xOpen method must set the sqlite3_file.pMethods to either -** a valid [sqlite3_io_methods] object or to NULL. xOpen must do -** this even if the open fails. SQLite expects that the sqlite3_file.pMethods -** element will be valid after xOpen returns regardless of the success -** or failure of the xOpen call. -** -** [[sqlite3_vfs.xAccess]] -** ^The flags argument to xAccess() may be [SQLITE_ACCESS_EXISTS] -** to test for the existence of a file, or [SQLITE_ACCESS_READWRITE] to -** test whether a file is readable and writable, or [SQLITE_ACCESS_READ] -** to test whether a file is at least readable. The file can be a -** directory. -** -** ^SQLite will always allocate at least mxPathname+1 bytes for the -** output buffer xFullPathname. The exact size of the output buffer -** is also passed as a parameter to both methods. If the output buffer -** is not large enough, [SQLITE_CANTOPEN] should be returned. Since this is -** handled as a fatal error by SQLite, vfs implementations should endeavor -** to prevent this by setting mxPathname to a sufficiently large value. -** -** The xRandomness(), xSleep(), xCurrentTime(), and xCurrentTimeInt64() -** interfaces are not strictly a part of the filesystem, but they are -** included in the VFS structure for completeness. -** The xRandomness() function attempts to return nBytes bytes -** of good-quality randomness into zOut. The return value is -** the actual number of bytes of randomness obtained. -** The xSleep() method causes the calling thread to sleep for at -** least the number of microseconds given. ^The xCurrentTime() -** method returns a Julian Day Number for the current date and time as -** a floating point value. -** ^The xCurrentTimeInt64() method returns, as an integer, the Julian -** Day Number multiplied by 86400000 (the number of milliseconds in -** a 24-hour day). -** ^SQLite will use the xCurrentTimeInt64() method to get the current -** date and time if that method is available (if iVersion is 2 or -** greater and the function pointer is not NULL) and will fall back -** to xCurrentTime() if xCurrentTimeInt64() is unavailable. -** -** ^The xSetSystemCall(), xGetSystemCall(), and xNestSystemCall() interfaces -** are not used by the SQLite core. These optional interfaces are provided -** by some VFSes to facilitate testing of the VFS code. By overriding -** system calls with functions under its control, a test program can -** simulate faults and error conditions that would otherwise be difficult -** or impossible to induce. The set of system calls that can be overridden -** varies from one VFS to another, and from one version of the same VFS to the -** next. Applications that use these interfaces must be prepared for any -** or all of these interfaces to be NULL or for their behavior to change -** from one release to the next. Applications must not attempt to access -** any of these methods if the iVersion of the VFS is less than 3. -*/ -typedef struct sqlite3_vfs sqlite3_vfs; -typedef void (*sqlite3_syscall_ptr)(void); -struct sqlite3_vfs { - int iVersion; /* Structure version number (currently 3) */ - int szOsFile; /* Size of subclassed sqlite3_file */ - int mxPathname; /* Maximum file pathname length */ - sqlite3_vfs *pNext; /* Next registered VFS */ - const char *zName; /* Name of this virtual file system */ - void *pAppData; /* Pointer to application-specific data */ - int (*xOpen)(sqlite3_vfs*, const char *zName, sqlite3_file*, - int flags, int *pOutFlags); - int (*xDelete)(sqlite3_vfs*, const char *zName, int syncDir); - int (*xAccess)(sqlite3_vfs*, const char *zName, int flags, int *pResOut); - int (*xFullPathname)(sqlite3_vfs*, const char *zName, int nOut, char *zOut); - void *(*xDlOpen)(sqlite3_vfs*, const char *zFilename); - void (*xDlError)(sqlite3_vfs*, int nByte, char *zErrMsg); - void (*(*xDlSym)(sqlite3_vfs*,void*, const char *zSymbol))(void); - void (*xDlClose)(sqlite3_vfs*, void*); - int (*xRandomness)(sqlite3_vfs*, int nByte, char *zOut); - int (*xSleep)(sqlite3_vfs*, int microseconds); - int (*xCurrentTime)(sqlite3_vfs*, double*); - int (*xGetLastError)(sqlite3_vfs*, int, char *); - /* - ** The methods above are in version 1 of the sqlite_vfs object - ** definition. Those that follow are added in version 2 or later - */ - int (*xCurrentTimeInt64)(sqlite3_vfs*, sqlite3_int64*); - /* - ** The methods above are in versions 1 and 2 of the sqlite_vfs object. - ** Those below are for version 3 and greater. - */ - int (*xSetSystemCall)(sqlite3_vfs*, const char *zName, sqlite3_syscall_ptr); - sqlite3_syscall_ptr (*xGetSystemCall)(sqlite3_vfs*, const char *zName); - const char *(*xNextSystemCall)(sqlite3_vfs*, const char *zName); - /* - ** The methods above are in versions 1 through 3 of the sqlite_vfs object. - ** New fields may be appended in figure versions. The iVersion - ** value will increment whenever this happens. - */ -}; - -/* -** CAPI3REF: Flags for the xAccess VFS method -** -** These integer constants can be used as the third parameter to -** the xAccess method of an [sqlite3_vfs] object. They determine -** what kind of permissions the xAccess method is looking for. -** With SQLITE_ACCESS_EXISTS, the xAccess method -** simply checks whether the file exists. -** With SQLITE_ACCESS_READWRITE, the xAccess method -** checks whether the named directory is both readable and writable -** (in other words, if files can be added, removed, and renamed within -** the directory). -** The SQLITE_ACCESS_READWRITE constant is currently used only by the -** [temp_store_directory pragma], though this could change in a future -** release of SQLite. -** With SQLITE_ACCESS_READ, the xAccess method -** checks whether the file is readable. The SQLITE_ACCESS_READ constant is -** currently unused, though it might be used in a future release of -** SQLite. -*/ -#define SQLITE_ACCESS_EXISTS 0 -#define SQLITE_ACCESS_READWRITE 1 /* Used by PRAGMA temp_store_directory */ -#define SQLITE_ACCESS_READ 2 /* Unused */ - -/* -** CAPI3REF: Flags for the xShmLock VFS method -** -** These integer constants define the various locking operations -** allowed by the xShmLock method of [sqlite3_io_methods]. The -** following are the only legal combinations of flags to the -** xShmLock method: -** -** <ul> -** <li> SQLITE_SHM_LOCK | SQLITE_SHM_SHARED -** <li> SQLITE_SHM_LOCK | SQLITE_SHM_EXCLUSIVE -** <li> SQLITE_SHM_UNLOCK | SQLITE_SHM_SHARED -** <li> SQLITE_SHM_UNLOCK | SQLITE_SHM_EXCLUSIVE -** </ul> -** -** When unlocking, the same SHARED or EXCLUSIVE flag must be supplied as -** was given on the corresponding lock. -** -** The xShmLock method can transition between unlocked and SHARED or -** between unlocked and EXCLUSIVE. It cannot transition between SHARED -** and EXCLUSIVE. -*/ -#define SQLITE_SHM_UNLOCK 1 -#define SQLITE_SHM_LOCK 2 -#define SQLITE_SHM_SHARED 4 -#define SQLITE_SHM_EXCLUSIVE 8 - -/* -** CAPI3REF: Maximum xShmLock index -** -** The xShmLock method on [sqlite3_io_methods] may use values -** between 0 and this upper bound as its "offset" argument. -** The SQLite core will never attempt to acquire or release a -** lock outside of this range -*/ -#define SQLITE_SHM_NLOCK 8 - - -/* -** CAPI3REF: Initialize The SQLite Library -** -** ^The sqlite3_initialize() routine initializes the -** SQLite library. ^The sqlite3_shutdown() routine -** deallocates any resources that were allocated by sqlite3_initialize(). -** These routines are designed to aid in process initialization and -** shutdown on embedded systems. Workstation applications using -** SQLite normally do not need to invoke either of these routines. -** -** A call to sqlite3_initialize() is an "effective" call if it is -** the first time sqlite3_initialize() is invoked during the lifetime of -** the process, or if it is the first time sqlite3_initialize() is invoked -** following a call to sqlite3_shutdown(). ^(Only an effective call -** of sqlite3_initialize() does any initialization. All other calls -** are harmless no-ops.)^ -** -** A call to sqlite3_shutdown() is an "effective" call if it is the first -** call to sqlite3_shutdown() since the last sqlite3_initialize(). ^(Only -** an effective call to sqlite3_shutdown() does any deinitialization. -** All other valid calls to sqlite3_shutdown() are harmless no-ops.)^ -** -** The sqlite3_initialize() interface is threadsafe, but sqlite3_shutdown() -** is not. The sqlite3_shutdown() interface must only be called from a -** single thread. All open [database connections] must be closed and all -** other SQLite resources must be deallocated prior to invoking -** sqlite3_shutdown(). -** -** Among other things, ^sqlite3_initialize() will invoke -** sqlite3_os_init(). Similarly, ^sqlite3_shutdown() -** will invoke sqlite3_os_end(). -** -** ^The sqlite3_initialize() routine returns [SQLITE_OK] on success. -** ^If for some reason, sqlite3_initialize() is unable to initialize -** the library (perhaps it is unable to allocate a needed resource such -** as a mutex) it returns an [error code] other than [SQLITE_OK]. -** -** ^The sqlite3_initialize() routine is called internally by many other -** SQLite interfaces so that an application usually does not need to -** invoke sqlite3_initialize() directly. For example, [sqlite3_open()] -** calls sqlite3_initialize() so the SQLite library will be automatically -** initialized when [sqlite3_open()] is called if it has not be initialized -** already. ^However, if SQLite is compiled with the [SQLITE_OMIT_AUTOINIT] -** compile-time option, then the automatic calls to sqlite3_initialize() -** are omitted and the application must call sqlite3_initialize() directly -** prior to using any other SQLite interface. For maximum portability, -** it is recommended that applications always invoke sqlite3_initialize() -** directly prior to using any other SQLite interface. Future releases -** of SQLite may require this. In other words, the behavior exhibited -** when SQLite is compiled with [SQLITE_OMIT_AUTOINIT] might become the -** default behavior in some future release of SQLite. -** -** The sqlite3_os_init() routine does operating-system specific -** initialization of the SQLite library. The sqlite3_os_end() -** routine undoes the effect of sqlite3_os_init(). Typical tasks -** performed by these routines include allocation or deallocation -** of static resources, initialization of global variables, -** setting up a default [sqlite3_vfs] module, or setting up -** a default configuration using [sqlite3_config()]. -** -** The application should never invoke either sqlite3_os_init() -** or sqlite3_os_end() directly. The application should only invoke -** sqlite3_initialize() and sqlite3_shutdown(). The sqlite3_os_init() -** interface is called automatically by sqlite3_initialize() and -** sqlite3_os_end() is called by sqlite3_shutdown(). Appropriate -** implementations for sqlite3_os_init() and sqlite3_os_end() -** are built into SQLite when it is compiled for Unix, Windows, or OS/2. -** When [custom builds | built for other platforms] -** (using the [SQLITE_OS_OTHER=1] compile-time -** option) the application must supply a suitable implementation for -** sqlite3_os_init() and sqlite3_os_end(). An application-supplied -** implementation of sqlite3_os_init() or sqlite3_os_end() -** must return [SQLITE_OK] on success and some other [error code] upon -** failure. -*/ -SQLITE_API int sqlite3_initialize(void); -SQLITE_API int sqlite3_shutdown(void); -SQLITE_API int sqlite3_os_init(void); -SQLITE_API int sqlite3_os_end(void); - -/* -** CAPI3REF: Configuring The SQLite Library -** -** The sqlite3_config() interface is used to make global configuration -** changes to SQLite in order to tune SQLite to the specific needs of -** the application. The default configuration is recommended for most -** applications and so this routine is usually not necessary. It is -** provided to support rare applications with unusual needs. -** -** The sqlite3_config() interface is not threadsafe. The application -** must insure that no other SQLite interfaces are invoked by other -** threads while sqlite3_config() is running. Furthermore, sqlite3_config() -** may only be invoked prior to library initialization using -** [sqlite3_initialize()] or after shutdown by [sqlite3_shutdown()]. -** ^If sqlite3_config() is called after [sqlite3_initialize()] and before -** [sqlite3_shutdown()] then it will return SQLITE_MISUSE. -** Note, however, that ^sqlite3_config() can be called as part of the -** implementation of an application-defined [sqlite3_os_init()]. -** -** The first argument to sqlite3_config() is an integer -** [configuration option] that determines -** what property of SQLite is to be configured. Subsequent arguments -** vary depending on the [configuration option] -** in the first argument. -** -** ^When a configuration option is set, sqlite3_config() returns [SQLITE_OK]. -** ^If the option is unknown or SQLite is unable to set the option -** then this routine returns a non-zero [error code]. -*/ -SQLITE_API int sqlite3_config(int, ...); - -/* -** CAPI3REF: Configure database connections -** -** The sqlite3_db_config() interface is used to make configuration -** changes to a [database connection]. The interface is similar to -** [sqlite3_config()] except that the changes apply to a single -** [database connection] (specified in the first argument). -** -** The second argument to sqlite3_db_config(D,V,...) is the -** [SQLITE_DBCONFIG_LOOKASIDE | configuration verb] - an integer code -** that indicates what aspect of the [database connection] is being configured. -** Subsequent arguments vary depending on the configuration verb. -** -** ^Calls to sqlite3_db_config() return SQLITE_OK if and only if -** the call is considered successful. -*/ -SQLITE_API int sqlite3_db_config(sqlite3*, int op, ...); - -/* -** CAPI3REF: Memory Allocation Routines -** -** An instance of this object defines the interface between SQLite -** and low-level memory allocation routines. -** -** This object is used in only one place in the SQLite interface. -** A pointer to an instance of this object is the argument to -** [sqlite3_config()] when the configuration option is -** [SQLITE_CONFIG_MALLOC] or [SQLITE_CONFIG_GETMALLOC]. -** By creating an instance of this object -** and passing it to [sqlite3_config]([SQLITE_CONFIG_MALLOC]) -** during configuration, an application can specify an alternative -** memory allocation subsystem for SQLite to use for all of its -** dynamic memory needs. -** -** Note that SQLite comes with several [built-in memory allocators] -** that are perfectly adequate for the overwhelming majority of applications -** and that this object is only useful to a tiny minority of applications -** with specialized memory allocation requirements. This object is -** also used during testing of SQLite in order to specify an alternative -** memory allocator that simulates memory out-of-memory conditions in -** order to verify that SQLite recovers gracefully from such -** conditions. -** -** The xMalloc, xRealloc, and xFree methods must work like the -** malloc(), realloc() and free() functions from the standard C library. -** ^SQLite guarantees that the second argument to -** xRealloc is always a value returned by a prior call to xRoundup. -** -** xSize should return the allocated size of a memory allocation -** previously obtained from xMalloc or xRealloc. The allocated size -** is always at least as big as the requested size but may be larger. -** -** The xRoundup method returns what would be the allocated size of -** a memory allocation given a particular requested size. Most memory -** allocators round up memory allocations at least to the next multiple -** of 8. Some allocators round up to a larger multiple or to a power of 2. -** Every memory allocation request coming in through [sqlite3_malloc()] -** or [sqlite3_realloc()] first calls xRoundup. If xRoundup returns 0, -** that causes the corresponding memory allocation to fail. -** -** The xInit method initializes the memory allocator. For example, -** it might allocate any require mutexes or initialize internal data -** structures. The xShutdown method is invoked (indirectly) by -** [sqlite3_shutdown()] and should deallocate any resources acquired -** by xInit. The pAppData pointer is used as the only parameter to -** xInit and xShutdown. -** -** SQLite holds the [SQLITE_MUTEX_STATIC_MASTER] mutex when it invokes -** the xInit method, so the xInit method need not be threadsafe. The -** xShutdown method is only called from [sqlite3_shutdown()] so it does -** not need to be threadsafe either. For all other methods, SQLite -** holds the [SQLITE_MUTEX_STATIC_MEM] mutex as long as the -** [SQLITE_CONFIG_MEMSTATUS] configuration option is turned on (which -** it is by default) and so the methods are automatically serialized. -** However, if [SQLITE_CONFIG_MEMSTATUS] is disabled, then the other -** methods must be threadsafe or else make their own arrangements for -** serialization. -** -** SQLite will never invoke xInit() more than once without an intervening -** call to xShutdown(). -*/ -typedef struct sqlite3_mem_methods sqlite3_mem_methods; -struct sqlite3_mem_methods { - void *(*xMalloc)(int); /* Memory allocation function */ - void (*xFree)(void*); /* Free a prior allocation */ - void *(*xRealloc)(void*,int); /* Resize an allocation */ - int (*xSize)(void*); /* Return the size of an allocation */ - int (*xRoundup)(int); /* Round up request size to allocation size */ - int (*xInit)(void*); /* Initialize the memory allocator */ - void (*xShutdown)(void*); /* Deinitialize the memory allocator */ - void *pAppData; /* Argument to xInit() and xShutdown() */ -}; - -/* -** CAPI3REF: Configuration Options -** KEYWORDS: {configuration option} -** -** These constants are the available integer configuration options that -** can be passed as the first argument to the [sqlite3_config()] interface. -** -** New configuration options may be added in future releases of SQLite. -** Existing configuration options might be discontinued. Applications -** should check the return code from [sqlite3_config()] to make sure that -** the call worked. The [sqlite3_config()] interface will return a -** non-zero [error code] if a discontinued or unsupported configuration option -** is invoked. -** -** <dl> -** [[SQLITE_CONFIG_SINGLETHREAD]] <dt>SQLITE_CONFIG_SINGLETHREAD</dt> -** <dd>There are no arguments to this option. ^This option sets the -** [threading mode] to Single-thread. In other words, it disables -** all mutexing and puts SQLite into a mode where it can only be used -** by a single thread. ^If SQLite is compiled with -** the [SQLITE_THREADSAFE | SQLITE_THREADSAFE=0] compile-time option then -** it is not possible to change the [threading mode] from its default -** value of Single-thread and so [sqlite3_config()] will return -** [SQLITE_ERROR] if called with the SQLITE_CONFIG_SINGLETHREAD -** configuration option.</dd> -** -** [[SQLITE_CONFIG_MULTITHREAD]] <dt>SQLITE_CONFIG_MULTITHREAD</dt> -** <dd>There are no arguments to this option. ^This option sets the -** [threading mode] to Multi-thread. In other words, it disables -** mutexing on [database connection] and [prepared statement] objects. -** The application is responsible for serializing access to -** [database connections] and [prepared statements]. But other mutexes -** are enabled so that SQLite will be safe to use in a multi-threaded -** environment as long as no two threads attempt to use the same -** [database connection] at the same time. ^If SQLite is compiled with -** the [SQLITE_THREADSAFE | SQLITE_THREADSAFE=0] compile-time option then -** it is not possible to set the Multi-thread [threading mode] and -** [sqlite3_config()] will return [SQLITE_ERROR] if called with the -** SQLITE_CONFIG_MULTITHREAD configuration option.</dd> -** -** [[SQLITE_CONFIG_SERIALIZED]] <dt>SQLITE_CONFIG_SERIALIZED</dt> -** <dd>There are no arguments to this option. ^This option sets the -** [threading mode] to Serialized. In other words, this option enables -** all mutexes including the recursive -** mutexes on [database connection] and [prepared statement] objects. -** In this mode (which is the default when SQLite is compiled with -** [SQLITE_THREADSAFE=1]) the SQLite library will itself serialize access -** to [database connections] and [prepared statements] so that the -** application is free to use the same [database connection] or the -** same [prepared statement] in different threads at the same time. -** ^If SQLite is compiled with -** the [SQLITE_THREADSAFE | SQLITE_THREADSAFE=0] compile-time option then -** it is not possible to set the Serialized [threading mode] and -** [sqlite3_config()] will return [SQLITE_ERROR] if called with the -** SQLITE_CONFIG_SERIALIZED configuration option.</dd> -** -** [[SQLITE_CONFIG_MALLOC]] <dt>SQLITE_CONFIG_MALLOC</dt> -** <dd> ^(The SQLITE_CONFIG_MALLOC option takes a single argument which is -** a pointer to an instance of the [sqlite3_mem_methods] structure. -** The argument specifies -** alternative low-level memory allocation routines to be used in place of -** the memory allocation routines built into SQLite.)^ ^SQLite makes -** its own private copy of the content of the [sqlite3_mem_methods] structure -** before the [sqlite3_config()] call returns.</dd> -** -** [[SQLITE_CONFIG_GETMALLOC]] <dt>SQLITE_CONFIG_GETMALLOC</dt> -** <dd> ^(The SQLITE_CONFIG_GETMALLOC option takes a single argument which -** is a pointer to an instance of the [sqlite3_mem_methods] structure. -** The [sqlite3_mem_methods] -** structure is filled with the currently defined memory allocation routines.)^ -** This option can be used to overload the default memory allocation -** routines with a wrapper that simulations memory allocation failure or -** tracks memory usage, for example. </dd> -** -** [[SQLITE_CONFIG_MEMSTATUS]] <dt>SQLITE_CONFIG_MEMSTATUS</dt> -** <dd> ^The SQLITE_CONFIG_MEMSTATUS option takes single argument of type int, -** interpreted as a boolean, which enables or disables the collection of -** memory allocation statistics. ^(When memory allocation statistics are -** disabled, the following SQLite interfaces become non-operational: -** <ul> -** <li> [sqlite3_memory_used()] -** <li> [sqlite3_memory_highwater()] -** <li> [sqlite3_soft_heap_limit64()] -** <li> [sqlite3_status()] -** </ul>)^ -** ^Memory allocation statistics are enabled by default unless SQLite is -** compiled with [SQLITE_DEFAULT_MEMSTATUS]=0 in which case memory -** allocation statistics are disabled by default. -** </dd> -** -** [[SQLITE_CONFIG_SCRATCH]] <dt>SQLITE_CONFIG_SCRATCH</dt> -** <dd> ^The SQLITE_CONFIG_SCRATCH option specifies a static memory buffer -** that SQLite can use for scratch memory. ^(There are three arguments -** to SQLITE_CONFIG_SCRATCH: A pointer an 8-byte -** aligned memory buffer from which the scratch allocations will be -** drawn, the size of each scratch allocation (sz), -** and the maximum number of scratch allocations (N).)^ -** The first argument must be a pointer to an 8-byte aligned buffer -** of at least sz*N bytes of memory. -** ^SQLite will not use more than one scratch buffers per thread. -** ^SQLite will never request a scratch buffer that is more than 6 -** times the database page size. -** ^If SQLite needs needs additional -** scratch memory beyond what is provided by this configuration option, then -** [sqlite3_malloc()] will be used to obtain the memory needed.<p> -** ^When the application provides any amount of scratch memory using -** SQLITE_CONFIG_SCRATCH, SQLite avoids unnecessary large -** [sqlite3_malloc|heap allocations]. -** This can help [Robson proof|prevent memory allocation failures] due to heap -** fragmentation in low-memory embedded systems. -** </dd> -** -** [[SQLITE_CONFIG_PAGECACHE]] <dt>SQLITE_CONFIG_PAGECACHE</dt> -** <dd> ^The SQLITE_CONFIG_PAGECACHE option specifies a static memory buffer -** that SQLite can use for the database page cache with the default page -** cache implementation. -** This configuration should not be used if an application-define page -** cache implementation is loaded using the [SQLITE_CONFIG_PCACHE2] -** configuration option. -** ^There are three arguments to SQLITE_CONFIG_PAGECACHE: A pointer to -** 8-byte aligned -** memory, the size of each page buffer (sz), and the number of pages (N). -** The sz argument should be the size of the largest database page -** (a power of two between 512 and 65536) plus some extra bytes for each -** page header. ^The number of extra bytes needed by the page header -** can be determined using the [SQLITE_CONFIG_PCACHE_HDRSZ] option -** to [sqlite3_config()]. -** ^It is harmless, apart from the wasted memory, -** for the sz parameter to be larger than necessary. The first -** argument should pointer to an 8-byte aligned block of memory that -** is at least sz*N bytes of memory, otherwise subsequent behavior is -** undefined. -** ^SQLite will use the memory provided by the first argument to satisfy its -** memory needs for the first N pages that it adds to cache. ^If additional -** page cache memory is needed beyond what is provided by this option, then -** SQLite goes to [sqlite3_malloc()] for the additional storage space.</dd> -** -** [[SQLITE_CONFIG_HEAP]] <dt>SQLITE_CONFIG_HEAP</dt> -** <dd> ^The SQLITE_CONFIG_HEAP option specifies a static memory buffer -** that SQLite will use for all of its dynamic memory allocation needs -** beyond those provided for by [SQLITE_CONFIG_SCRATCH] and -** [SQLITE_CONFIG_PAGECACHE]. -** ^The SQLITE_CONFIG_HEAP option is only available if SQLite is compiled -** with either [SQLITE_ENABLE_MEMSYS3] or [SQLITE_ENABLE_MEMSYS5] and returns -** [SQLITE_ERROR] if invoked otherwise. -** ^There are three arguments to SQLITE_CONFIG_HEAP: -** An 8-byte aligned pointer to the memory, -** the number of bytes in the memory buffer, and the minimum allocation size. -** ^If the first pointer (the memory pointer) is NULL, then SQLite reverts -** to using its default memory allocator (the system malloc() implementation), -** undoing any prior invocation of [SQLITE_CONFIG_MALLOC]. ^If the -** memory pointer is not NULL then the alternative memory -** allocator is engaged to handle all of SQLites memory allocation needs. -** The first pointer (the memory pointer) must be aligned to an 8-byte -** boundary or subsequent behavior of SQLite will be undefined. -** The minimum allocation size is capped at 2**12. Reasonable values -** for the minimum allocation size are 2**5 through 2**8.</dd> -** -** [[SQLITE_CONFIG_MUTEX]] <dt>SQLITE_CONFIG_MUTEX</dt> -** <dd> ^(The SQLITE_CONFIG_MUTEX option takes a single argument which is a -** pointer to an instance of the [sqlite3_mutex_methods] structure. -** The argument specifies alternative low-level mutex routines to be used -** in place the mutex routines built into SQLite.)^ ^SQLite makes a copy of -** the content of the [sqlite3_mutex_methods] structure before the call to -** [sqlite3_config()] returns. ^If SQLite is compiled with -** the [SQLITE_THREADSAFE | SQLITE_THREADSAFE=0] compile-time option then -** the entire mutexing subsystem is omitted from the build and hence calls to -** [sqlite3_config()] with the SQLITE_CONFIG_MUTEX configuration option will -** return [SQLITE_ERROR].</dd> -** -** [[SQLITE_CONFIG_GETMUTEX]] <dt>SQLITE_CONFIG_GETMUTEX</dt> -** <dd> ^(The SQLITE_CONFIG_GETMUTEX option takes a single argument which -** is a pointer to an instance of the [sqlite3_mutex_methods] structure. The -** [sqlite3_mutex_methods] -** structure is filled with the currently defined mutex routines.)^ -** This option can be used to overload the default mutex allocation -** routines with a wrapper used to track mutex usage for performance -** profiling or testing, for example. ^If SQLite is compiled with -** the [SQLITE_THREADSAFE | SQLITE_THREADSAFE=0] compile-time option then -** the entire mutexing subsystem is omitted from the build and hence calls to -** [sqlite3_config()] with the SQLITE_CONFIG_GETMUTEX configuration option will -** return [SQLITE_ERROR].</dd> -** -** [[SQLITE_CONFIG_LOOKASIDE]] <dt>SQLITE_CONFIG_LOOKASIDE</dt> -** <dd> ^(The SQLITE_CONFIG_LOOKASIDE option takes two arguments that determine -** the default size of lookaside memory on each [database connection]. -** The first argument is the -** size of each lookaside buffer slot and the second is the number of -** slots allocated to each database connection.)^ ^(SQLITE_CONFIG_LOOKASIDE -** sets the <i>default</i> lookaside size. The [SQLITE_DBCONFIG_LOOKASIDE] -** option to [sqlite3_db_config()] can be used to change the lookaside -** configuration on individual connections.)^ </dd> -** -** [[SQLITE_CONFIG_PCACHE2]] <dt>SQLITE_CONFIG_PCACHE2</dt> -** <dd> ^(The SQLITE_CONFIG_PCACHE2 option takes a single argument which is -** a pointer to an [sqlite3_pcache_methods2] object. This object specifies -** the interface to a custom page cache implementation.)^ -** ^SQLite makes a copy of the [sqlite3_pcache_methods2] object.</dd> -** -** [[SQLITE_CONFIG_GETPCACHE2]] <dt>SQLITE_CONFIG_GETPCACHE2</dt> -** <dd> ^(The SQLITE_CONFIG_GETPCACHE2 option takes a single argument which -** is a pointer to an [sqlite3_pcache_methods2] object. SQLite copies of -** the current page cache implementation into that object.)^ </dd> -** -** [[SQLITE_CONFIG_LOG]] <dt>SQLITE_CONFIG_LOG</dt> -** <dd> The SQLITE_CONFIG_LOG option is used to configure the SQLite -** global [error log]. -** (^The SQLITE_CONFIG_LOG option takes two arguments: a pointer to a -** function with a call signature of void(*)(void*,int,const char*), -** and a pointer to void. ^If the function pointer is not NULL, it is -** invoked by [sqlite3_log()] to process each logging event. ^If the -** function pointer is NULL, the [sqlite3_log()] interface becomes a no-op. -** ^The void pointer that is the second argument to SQLITE_CONFIG_LOG is -** passed through as the first parameter to the application-defined logger -** function whenever that function is invoked. ^The second parameter to -** the logger function is a copy of the first parameter to the corresponding -** [sqlite3_log()] call and is intended to be a [result code] or an -** [extended result code]. ^The third parameter passed to the logger is -** log message after formatting via [sqlite3_snprintf()]. -** The SQLite logging interface is not reentrant; the logger function -** supplied by the application must not invoke any SQLite interface. -** In a multi-threaded application, the application-defined logger -** function must be threadsafe. </dd> -** -** [[SQLITE_CONFIG_URI]] <dt>SQLITE_CONFIG_URI -** <dd>^(The SQLITE_CONFIG_URI option takes a single argument of type int. -** If non-zero, then URI handling is globally enabled. If the parameter is zero, -** then URI handling is globally disabled.)^ ^If URI handling is globally -** enabled, all filenames passed to [sqlite3_open()], [sqlite3_open_v2()], -** [sqlite3_open16()] or -** specified as part of [ATTACH] commands are interpreted as URIs, regardless -** of whether or not the [SQLITE_OPEN_URI] flag is set when the database -** connection is opened. ^If it is globally disabled, filenames are -** only interpreted as URIs if the SQLITE_OPEN_URI flag is set when the -** database connection is opened. ^(By default, URI handling is globally -** disabled. The default value may be changed by compiling with the -** [SQLITE_USE_URI] symbol defined.)^ -** -** [[SQLITE_CONFIG_COVERING_INDEX_SCAN]] <dt>SQLITE_CONFIG_COVERING_INDEX_SCAN -** <dd>^The SQLITE_CONFIG_COVERING_INDEX_SCAN option takes a single integer -** argument which is interpreted as a boolean in order to enable or disable -** the use of covering indices for full table scans in the query optimizer. -** ^The default setting is determined -** by the [SQLITE_ALLOW_COVERING_INDEX_SCAN] compile-time option, or is "on" -** if that compile-time option is omitted. -** The ability to disable the use of covering indices for full table scans -** is because some incorrectly coded legacy applications might malfunction -** when the optimization is enabled. Providing the ability to -** disable the optimization allows the older, buggy application code to work -** without change even with newer versions of SQLite. -** -** [[SQLITE_CONFIG_PCACHE]] [[SQLITE_CONFIG_GETPCACHE]] -** <dt>SQLITE_CONFIG_PCACHE and SQLITE_CONFIG_GETPCACHE -** <dd> These options are obsolete and should not be used by new code. -** They are retained for backwards compatibility but are now no-ops. -** </dd> -** -** [[SQLITE_CONFIG_SQLLOG]] -** <dt>SQLITE_CONFIG_SQLLOG -** <dd>This option is only available if sqlite is compiled with the -** [SQLITE_ENABLE_SQLLOG] pre-processor macro defined. The first argument should -** be a pointer to a function of type void(*)(void*,sqlite3*,const char*, int). -** The second should be of type (void*). The callback is invoked by the library -** in three separate circumstances, identified by the value passed as the -** fourth parameter. If the fourth parameter is 0, then the database connection -** passed as the second argument has just been opened. The third argument -** points to a buffer containing the name of the main database file. If the -** fourth parameter is 1, then the SQL statement that the third parameter -** points to has just been executed. Or, if the fourth parameter is 2, then -** the connection being passed as the second parameter is being closed. The -** third parameter is passed NULL In this case. An example of using this -** configuration option can be seen in the "test_sqllog.c" source file in -** the canonical SQLite source tree.</dd> -** -** [[SQLITE_CONFIG_MMAP_SIZE]] -** <dt>SQLITE_CONFIG_MMAP_SIZE -** <dd>^SQLITE_CONFIG_MMAP_SIZE takes two 64-bit integer (sqlite3_int64) values -** that are the default mmap size limit (the default setting for -** [PRAGMA mmap_size]) and the maximum allowed mmap size limit. -** ^The default setting can be overridden by each database connection using -** either the [PRAGMA mmap_size] command, or by using the -** [SQLITE_FCNTL_MMAP_SIZE] file control. ^(The maximum allowed mmap size -** will be silently truncated if necessary so that it does not exceed the -** compile-time maximum mmap size set by the -** [SQLITE_MAX_MMAP_SIZE] compile-time option.)^ -** ^If either argument to this option is negative, then that argument is -** changed to its compile-time default. -** -** [[SQLITE_CONFIG_WIN32_HEAPSIZE]] -** <dt>SQLITE_CONFIG_WIN32_HEAPSIZE -** <dd>^The SQLITE_CONFIG_WIN32_HEAPSIZE option is only available if SQLite is -** compiled for Windows with the [SQLITE_WIN32_MALLOC] pre-processor macro -** defined. ^SQLITE_CONFIG_WIN32_HEAPSIZE takes a 32-bit unsigned integer value -** that specifies the maximum size of the created heap. -** </dl> -** -** [[SQLITE_CONFIG_PCACHE_HDRSZ]] -** <dt>SQLITE_CONFIG_PCACHE_HDRSZ -** <dd>^The SQLITE_CONFIG_PCACHE_HDRSZ option takes a single parameter which -** is a pointer to an integer and writes into that integer the number of extra -** bytes per page required for each page in [SQLITE_CONFIG_PAGECACHE]. -** The amount of extra space required can change depending on the compiler, -** target platform, and SQLite version. -** -** [[SQLITE_CONFIG_PMASZ]] -** <dt>SQLITE_CONFIG_PMASZ -** <dd>^The SQLITE_CONFIG_PMASZ option takes a single parameter which -** is an unsigned integer and sets the "Minimum PMA Size" for the multithreaded -** sorter to that integer. The default minimum PMA Size is set by the -** [SQLITE_SORTER_PMASZ] compile-time option. New threads are launched -** to help with sort operations when multithreaded sorting -** is enabled (using the [PRAGMA threads] command) and the amount of content -** to be sorted exceeds the page size times the minimum of the -** [PRAGMA cache_size] setting and this value. -** </dl> -*/ -#define SQLITE_CONFIG_SINGLETHREAD 1 /* nil */ -#define SQLITE_CONFIG_MULTITHREAD 2 /* nil */ -#define SQLITE_CONFIG_SERIALIZED 3 /* nil */ -#define SQLITE_CONFIG_MALLOC 4 /* sqlite3_mem_methods* */ -#define SQLITE_CONFIG_GETMALLOC 5 /* sqlite3_mem_methods* */ -#define SQLITE_CONFIG_SCRATCH 6 /* void*, int sz, int N */ -#define SQLITE_CONFIG_PAGECACHE 7 /* void*, int sz, int N */ -#define SQLITE_CONFIG_HEAP 8 /* void*, int nByte, int min */ -#define SQLITE_CONFIG_MEMSTATUS 9 /* boolean */ -#define SQLITE_CONFIG_MUTEX 10 /* sqlite3_mutex_methods* */ -#define SQLITE_CONFIG_GETMUTEX 11 /* sqlite3_mutex_methods* */ -/* previously SQLITE_CONFIG_CHUNKALLOC 12 which is now unused. */ -#define SQLITE_CONFIG_LOOKASIDE 13 /* int int */ -#define SQLITE_CONFIG_PCACHE 14 /* no-op */ -#define SQLITE_CONFIG_GETPCACHE 15 /* no-op */ -#define SQLITE_CONFIG_LOG 16 /* xFunc, void* */ -#define SQLITE_CONFIG_URI 17 /* int */ -#define SQLITE_CONFIG_PCACHE2 18 /* sqlite3_pcache_methods2* */ -#define SQLITE_CONFIG_GETPCACHE2 19 /* sqlite3_pcache_methods2* */ -#define SQLITE_CONFIG_COVERING_INDEX_SCAN 20 /* int */ -#define SQLITE_CONFIG_SQLLOG 21 /* xSqllog, void* */ -#define SQLITE_CONFIG_MMAP_SIZE 22 /* sqlite3_int64, sqlite3_int64 */ -#define SQLITE_CONFIG_WIN32_HEAPSIZE 23 /* int nByte */ -#define SQLITE_CONFIG_PCACHE_HDRSZ 24 /* int *psz */ -#define SQLITE_CONFIG_PMASZ 25 /* unsigned int szPma */ - -/* -** CAPI3REF: Database Connection Configuration Options -** -** These constants are the available integer configuration options that -** can be passed as the second argument to the [sqlite3_db_config()] interface. -** -** New configuration options may be added in future releases of SQLite. -** Existing configuration options might be discontinued. Applications -** should check the return code from [sqlite3_db_config()] to make sure that -** the call worked. ^The [sqlite3_db_config()] interface will return a -** non-zero [error code] if a discontinued or unsupported configuration option -** is invoked. -** -** <dl> -** <dt>SQLITE_DBCONFIG_LOOKASIDE</dt> -** <dd> ^This option takes three additional arguments that determine the -** [lookaside memory allocator] configuration for the [database connection]. -** ^The first argument (the third parameter to [sqlite3_db_config()] is a -** pointer to a memory buffer to use for lookaside memory. -** ^The first argument after the SQLITE_DBCONFIG_LOOKASIDE verb -** may be NULL in which case SQLite will allocate the -** lookaside buffer itself using [sqlite3_malloc()]. ^The second argument is the -** size of each lookaside buffer slot. ^The third argument is the number of -** slots. The size of the buffer in the first argument must be greater than -** or equal to the product of the second and third arguments. The buffer -** must be aligned to an 8-byte boundary. ^If the second argument to -** SQLITE_DBCONFIG_LOOKASIDE is not a multiple of 8, it is internally -** rounded down to the next smaller multiple of 8. ^(The lookaside memory -** configuration for a database connection can only be changed when that -** connection is not currently using lookaside memory, or in other words -** when the "current value" returned by -** [sqlite3_db_status](D,[SQLITE_CONFIG_LOOKASIDE],...) is zero. -** Any attempt to change the lookaside memory configuration when lookaside -** memory is in use leaves the configuration unchanged and returns -** [SQLITE_BUSY].)^</dd> -** -** <dt>SQLITE_DBCONFIG_ENABLE_FKEY</dt> -** <dd> ^This option is used to enable or disable the enforcement of -** [foreign key constraints]. There should be two additional arguments. -** The first argument is an integer which is 0 to disable FK enforcement, -** positive to enable FK enforcement or negative to leave FK enforcement -** unchanged. The second parameter is a pointer to an integer into which -** is written 0 or 1 to indicate whether FK enforcement is off or on -** following this call. The second parameter may be a NULL pointer, in -** which case the FK enforcement setting is not reported back. </dd> -** -** <dt>SQLITE_DBCONFIG_ENABLE_TRIGGER</dt> -** <dd> ^This option is used to enable or disable [CREATE TRIGGER | triggers]. -** There should be two additional arguments. -** The first argument is an integer which is 0 to disable triggers, -** positive to enable triggers or negative to leave the setting unchanged. -** The second parameter is a pointer to an integer into which -** is written 0 or 1 to indicate whether triggers are disabled or enabled -** following this call. The second parameter may be a NULL pointer, in -** which case the trigger setting is not reported back. </dd> -** -** </dl> -*/ -#define SQLITE_DBCONFIG_LOOKASIDE 1001 /* void* int int */ -#define SQLITE_DBCONFIG_ENABLE_FKEY 1002 /* int int* */ -#define SQLITE_DBCONFIG_ENABLE_TRIGGER 1003 /* int int* */ - - -/* -** CAPI3REF: Enable Or Disable Extended Result Codes -** -** ^The sqlite3_extended_result_codes() routine enables or disables the -** [extended result codes] feature of SQLite. ^The extended result -** codes are disabled by default for historical compatibility. -*/ -SQLITE_API int sqlite3_extended_result_codes(sqlite3*, int onoff); - -/* -** CAPI3REF: Last Insert Rowid -** -** ^Each entry in most SQLite tables (except for [WITHOUT ROWID] tables) -** has a unique 64-bit signed -** integer key called the [ROWID | "rowid"]. ^The rowid is always available -** as an undeclared column named ROWID, OID, or _ROWID_ as long as those -** names are not also used by explicitly declared columns. ^If -** the table has a column of type [INTEGER PRIMARY KEY] then that column -** is another alias for the rowid. -** -** ^The sqlite3_last_insert_rowid(D) interface returns the [rowid] of the -** most recent successful [INSERT] into a rowid table or [virtual table] -** on database connection D. -** ^Inserts into [WITHOUT ROWID] tables are not recorded. -** ^If no successful [INSERT]s into rowid tables -** have ever occurred on the database connection D, -** then sqlite3_last_insert_rowid(D) returns zero. -** -** ^(If an [INSERT] occurs within a trigger or within a [virtual table] -** method, then this routine will return the [rowid] of the inserted -** row as long as the trigger or virtual table method is running. -** But once the trigger or virtual table method ends, the value returned -** by this routine reverts to what it was before the trigger or virtual -** table method began.)^ -** -** ^An [INSERT] that fails due to a constraint violation is not a -** successful [INSERT] and does not change the value returned by this -** routine. ^Thus INSERT OR FAIL, INSERT OR IGNORE, INSERT OR ROLLBACK, -** and INSERT OR ABORT make no changes to the return value of this -** routine when their insertion fails. ^(When INSERT OR REPLACE -** encounters a constraint violation, it does not fail. The -** INSERT continues to completion after deleting rows that caused -** the constraint problem so INSERT OR REPLACE will always change -** the return value of this interface.)^ -** -** ^For the purposes of this routine, an [INSERT] is considered to -** be successful even if it is subsequently rolled back. -** -** This function is accessible to SQL statements via the -** [last_insert_rowid() SQL function]. -** -** If a separate thread performs a new [INSERT] on the same -** database connection while the [sqlite3_last_insert_rowid()] -** function is running and thus changes the last insert [rowid], -** then the value returned by [sqlite3_last_insert_rowid()] is -** unpredictable and might not equal either the old or the new -** last insert [rowid]. -*/ -SQLITE_API sqlite3_int64 sqlite3_last_insert_rowid(sqlite3*); - -/* -** CAPI3REF: Count The Number Of Rows Modified -** -** ^This function returns the number of rows modified, inserted or -** deleted by the most recently completed INSERT, UPDATE or DELETE -** statement on the database connection specified by the only parameter. -** ^Executing any other type of SQL statement does not modify the value -** returned by this function. -** -** ^Only changes made directly by the INSERT, UPDATE or DELETE statement are -** considered - auxiliary changes caused by [CREATE TRIGGER | triggers], -** [foreign key actions] or [REPLACE] constraint resolution are not counted. -** -** Changes to a view that are intercepted by -** [INSTEAD OF trigger | INSTEAD OF triggers] are not counted. ^The value -** returned by sqlite3_changes() immediately after an INSERT, UPDATE or -** DELETE statement run on a view is always zero. Only changes made to real -** tables are counted. -** -** Things are more complicated if the sqlite3_changes() function is -** executed while a trigger program is running. This may happen if the -** program uses the [changes() SQL function], or if some other callback -** function invokes sqlite3_changes() directly. Essentially: -** -** <ul> -** <li> ^(Before entering a trigger program the value returned by -** sqlite3_changes() function is saved. After the trigger program -** has finished, the original value is restored.)^ -** -** <li> ^(Within a trigger program each INSERT, UPDATE and DELETE -** statement sets the value returned by sqlite3_changes() -** upon completion as normal. Of course, this value will not include -** any changes performed by sub-triggers, as the sqlite3_changes() -** value will be saved and restored after each sub-trigger has run.)^ -** </ul> -** -** ^This means that if the changes() SQL function (or similar) is used -** by the first INSERT, UPDATE or DELETE statement within a trigger, it -** returns the value as set when the calling statement began executing. -** ^If it is used by the second or subsequent such statement within a trigger -** program, the value returned reflects the number of rows modified by the -** previous INSERT, UPDATE or DELETE statement within the same trigger. -** -** See also the [sqlite3_total_changes()] interface, the -** [count_changes pragma], and the [changes() SQL function]. -** -** If a separate thread makes changes on the same database connection -** while [sqlite3_changes()] is running then the value returned -** is unpredictable and not meaningful. -*/ -SQLITE_API int sqlite3_changes(sqlite3*); - -/* -** CAPI3REF: Total Number Of Rows Modified -** -** ^This function returns the total number of rows inserted, modified or -** deleted by all [INSERT], [UPDATE] or [DELETE] statements completed -** since the database connection was opened, including those executed as -** part of trigger programs. ^Executing any other type of SQL statement -** does not affect the value returned by sqlite3_total_changes(). -** -** ^Changes made as part of [foreign key actions] are included in the -** count, but those made as part of REPLACE constraint resolution are -** not. ^Changes to a view that are intercepted by INSTEAD OF triggers -** are not counted. -** -** See also the [sqlite3_changes()] interface, the -** [count_changes pragma], and the [total_changes() SQL function]. -** -** If a separate thread makes changes on the same database connection -** while [sqlite3_total_changes()] is running then the value -** returned is unpredictable and not meaningful. -*/ -SQLITE_API int sqlite3_total_changes(sqlite3*); - -/* -** CAPI3REF: Interrupt A Long-Running Query -** -** ^This function causes any pending database operation to abort and -** return at its earliest opportunity. This routine is typically -** called in response to a user action such as pressing "Cancel" -** or Ctrl-C where the user wants a long query operation to halt -** immediately. -** -** ^It is safe to call this routine from a thread different from the -** thread that is currently running the database operation. But it -** is not safe to call this routine with a [database connection] that -** is closed or might close before sqlite3_interrupt() returns. -** -** ^If an SQL operation is very nearly finished at the time when -** sqlite3_interrupt() is called, then it might not have an opportunity -** to be interrupted and might continue to completion. -** -** ^An SQL operation that is interrupted will return [SQLITE_INTERRUPT]. -** ^If the interrupted SQL operation is an INSERT, UPDATE, or DELETE -** that is inside an explicit transaction, then the entire transaction -** will be rolled back automatically. -** -** ^The sqlite3_interrupt(D) call is in effect until all currently running -** SQL statements on [database connection] D complete. ^Any new SQL statements -** that are started after the sqlite3_interrupt() call and before the -** running statements reaches zero are interrupted as if they had been -** running prior to the sqlite3_interrupt() call. ^New SQL statements -** that are started after the running statement count reaches zero are -** not effected by the sqlite3_interrupt(). -** ^A call to sqlite3_interrupt(D) that occurs when there are no running -** SQL statements is a no-op and has no effect on SQL statements -** that are started after the sqlite3_interrupt() call returns. -** -** If the database connection closes while [sqlite3_interrupt()] -** is running then bad things will likely happen. -*/ -SQLITE_API void sqlite3_interrupt(sqlite3*); - -/* -** CAPI3REF: Determine If An SQL Statement Is Complete -** -** These routines are useful during command-line input to determine if the -** currently entered text seems to form a complete SQL statement or -** if additional input is needed before sending the text into -** SQLite for parsing. ^These routines return 1 if the input string -** appears to be a complete SQL statement. ^A statement is judged to be -** complete if it ends with a semicolon token and is not a prefix of a -** well-formed CREATE TRIGGER statement. ^Semicolons that are embedded within -** string literals or quoted identifier names or comments are not -** independent tokens (they are part of the token in which they are -** embedded) and thus do not count as a statement terminator. ^Whitespace -** and comments that follow the final semicolon are ignored. -** -** ^These routines return 0 if the statement is incomplete. ^If a -** memory allocation fails, then SQLITE_NOMEM is returned. -** -** ^These routines do not parse the SQL statements thus -** will not detect syntactically incorrect SQL. -** -** ^(If SQLite has not been initialized using [sqlite3_initialize()] prior -** to invoking sqlite3_complete16() then sqlite3_initialize() is invoked -** automatically by sqlite3_complete16(). If that initialization fails, -** then the return value from sqlite3_complete16() will be non-zero -** regardless of whether or not the input SQL is complete.)^ -** -** The input to [sqlite3_complete()] must be a zero-terminated -** UTF-8 string. -** -** The input to [sqlite3_complete16()] must be a zero-terminated -** UTF-16 string in native byte order. -*/ -SQLITE_API int sqlite3_complete(const char *sql); -SQLITE_API int sqlite3_complete16(const void *sql); - -/* -** CAPI3REF: Register A Callback To Handle SQLITE_BUSY Errors -** KEYWORDS: {busy-handler callback} {busy handler} -** -** ^The sqlite3_busy_handler(D,X,P) routine sets a callback function X -** that might be invoked with argument P whenever -** an attempt is made to access a database table associated with -** [database connection] D when another thread -** or process has the table locked. -** The sqlite3_busy_handler() interface is used to implement -** [sqlite3_busy_timeout()] and [PRAGMA busy_timeout]. -** -** ^If the busy callback is NULL, then [SQLITE_BUSY] -** is returned immediately upon encountering the lock. ^If the busy callback -** is not NULL, then the callback might be invoked with two arguments. -** -** ^The first argument to the busy handler is a copy of the void* pointer which -** is the third argument to sqlite3_busy_handler(). ^The second argument to -** the busy handler callback is the number of times that the busy handler has -** been invoked previously for the same locking event. ^If the -** busy callback returns 0, then no additional attempts are made to -** access the database and [SQLITE_BUSY] is returned -** to the application. -** ^If the callback returns non-zero, then another attempt -** is made to access the database and the cycle repeats. -** -** The presence of a busy handler does not guarantee that it will be invoked -** when there is lock contention. ^If SQLite determines that invoking the busy -** handler could result in a deadlock, it will go ahead and return [SQLITE_BUSY] -** to the application instead of invoking the -** busy handler. -** Consider a scenario where one process is holding a read lock that -** it is trying to promote to a reserved lock and -** a second process is holding a reserved lock that it is trying -** to promote to an exclusive lock. The first process cannot proceed -** because it is blocked by the second and the second process cannot -** proceed because it is blocked by the first. If both processes -** invoke the busy handlers, neither will make any progress. Therefore, -** SQLite returns [SQLITE_BUSY] for the first process, hoping that this -** will induce the first process to release its read lock and allow -** the second process to proceed. -** -** ^The default busy callback is NULL. -** -** ^(There can only be a single busy handler defined for each -** [database connection]. Setting a new busy handler clears any -** previously set handler.)^ ^Note that calling [sqlite3_busy_timeout()] -** or evaluating [PRAGMA busy_timeout=N] will change the -** busy handler and thus clear any previously set busy handler. -** -** The busy callback should not take any actions which modify the -** database connection that invoked the busy handler. In other words, -** the busy handler is not reentrant. Any such actions -** result in undefined behavior. -** -** A busy handler must not close the database connection -** or [prepared statement] that invoked the busy handler. -*/ -SQLITE_API int sqlite3_busy_handler(sqlite3*, int(*)(void*,int), void*); - -/* -** CAPI3REF: Set A Busy Timeout -** -** ^This routine sets a [sqlite3_busy_handler | busy handler] that sleeps -** for a specified amount of time when a table is locked. ^The handler -** will sleep multiple times until at least "ms" milliseconds of sleeping -** have accumulated. ^After at least "ms" milliseconds of sleeping, -** the handler returns 0 which causes [sqlite3_step()] to return -** [SQLITE_BUSY]. -** -** ^Calling this routine with an argument less than or equal to zero -** turns off all busy handlers. -** -** ^(There can only be a single busy handler for a particular -** [database connection] at any given moment. If another busy handler -** was defined (using [sqlite3_busy_handler()]) prior to calling -** this routine, that other busy handler is cleared.)^ -** -** See also: [PRAGMA busy_timeout] -*/ -SQLITE_API int sqlite3_busy_timeout(sqlite3*, int ms); - -/* -** CAPI3REF: Convenience Routines For Running Queries -** -** This is a legacy interface that is preserved for backwards compatibility. -** Use of this interface is not recommended. -** -** Definition: A <b>result table</b> is memory data structure created by the -** [sqlite3_get_table()] interface. A result table records the -** complete query results from one or more queries. -** -** The table conceptually has a number of rows and columns. But -** these numbers are not part of the result table itself. These -** numbers are obtained separately. Let N be the number of rows -** and M be the number of columns. -** -** A result table is an array of pointers to zero-terminated UTF-8 strings. -** There are (N+1)*M elements in the array. The first M pointers point -** to zero-terminated strings that contain the names of the columns. -** The remaining entries all point to query results. NULL values result -** in NULL pointers. All other values are in their UTF-8 zero-terminated -** string representation as returned by [sqlite3_column_text()]. -** -** A result table might consist of one or more memory allocations. -** It is not safe to pass a result table directly to [sqlite3_free()]. -** A result table should be deallocated using [sqlite3_free_table()]. -** -** ^(As an example of the result table format, suppose a query result -** is as follows: -** -** <blockquote><pre> -** Name | Age -** ----------------------- -** Alice | 43 -** Bob | 28 -** Cindy | 21 -** </pre></blockquote> -** -** There are two column (M==2) and three rows (N==3). Thus the -** result table has 8 entries. Suppose the result table is stored -** in an array names azResult. Then azResult holds this content: -** -** <blockquote><pre> -** azResult[0] = "Name"; -** azResult[1] = "Age"; -** azResult[2] = "Alice"; -** azResult[3] = "43"; -** azResult[4] = "Bob"; -** azResult[5] = "28"; -** azResult[6] = "Cindy"; -** azResult[7] = "21"; -** </pre></blockquote>)^ -** -** ^The sqlite3_get_table() function evaluates one or more -** semicolon-separated SQL statements in the zero-terminated UTF-8 -** string of its 2nd parameter and returns a result table to the -** pointer given in its 3rd parameter. -** -** After the application has finished with the result from sqlite3_get_table(), -** it must pass the result table pointer to sqlite3_free_table() in order to -** release the memory that was malloced. Because of the way the -** [sqlite3_malloc()] happens within sqlite3_get_table(), the calling -** function must not try to call [sqlite3_free()] directly. Only -** [sqlite3_free_table()] is able to release the memory properly and safely. -** -** The sqlite3_get_table() interface is implemented as a wrapper around -** [sqlite3_exec()]. The sqlite3_get_table() routine does not have access -** to any internal data structures of SQLite. It uses only the public -** interface defined here. As a consequence, errors that occur in the -** wrapper layer outside of the internal [sqlite3_exec()] call are not -** reflected in subsequent calls to [sqlite3_errcode()] or -** [sqlite3_errmsg()]. -*/ -SQLITE_API int sqlite3_get_table( - sqlite3 *db, /* An open database */ - const char *zSql, /* SQL to be evaluated */ - char ***pazResult, /* Results of the query */ - int *pnRow, /* Number of result rows written here */ - int *pnColumn, /* Number of result columns written here */ - char **pzErrmsg /* Error msg written here */ -); -SQLITE_API void sqlite3_free_table(char **result); - -/* -** CAPI3REF: Formatted String Printing Functions -** -** These routines are work-alikes of the "printf()" family of functions -** from the standard C library. -** -** ^The sqlite3_mprintf() and sqlite3_vmprintf() routines write their -** results into memory obtained from [sqlite3_malloc()]. -** The strings returned by these two routines should be -** released by [sqlite3_free()]. ^Both routines return a -** NULL pointer if [sqlite3_malloc()] is unable to allocate enough -** memory to hold the resulting string. -** -** ^(The sqlite3_snprintf() routine is similar to "snprintf()" from -** the standard C library. The result is written into the -** buffer supplied as the second parameter whose size is given by -** the first parameter. Note that the order of the -** first two parameters is reversed from snprintf().)^ This is an -** historical accident that cannot be fixed without breaking -** backwards compatibility. ^(Note also that sqlite3_snprintf() -** returns a pointer to its buffer instead of the number of -** characters actually written into the buffer.)^ We admit that -** the number of characters written would be a more useful return -** value but we cannot change the implementation of sqlite3_snprintf() -** now without breaking compatibility. -** -** ^As long as the buffer size is greater than zero, sqlite3_snprintf() -** guarantees that the buffer is always zero-terminated. ^The first -** parameter "n" is the total size of the buffer, including space for -** the zero terminator. So the longest string that can be completely -** written will be n-1 characters. -** -** ^The sqlite3_vsnprintf() routine is a varargs version of sqlite3_snprintf(). -** -** These routines all implement some additional formatting -** options that are useful for constructing SQL statements. -** All of the usual printf() formatting options apply. In addition, there -** is are "%q", "%Q", and "%z" options. -** -** ^(The %q option works like %s in that it substitutes a nul-terminated -** string from the argument list. But %q also doubles every '\'' character. -** %q is designed for use inside a string literal.)^ By doubling each '\'' -** character it escapes that character and allows it to be inserted into -** the string. -** -** For example, assume the string variable zText contains text as follows: -** -** <blockquote><pre> -** char *zText = "It's a happy day!"; -** </pre></blockquote> -** -** One can use this text in an SQL statement as follows: -** -** <blockquote><pre> -** char *zSQL = sqlite3_mprintf("INSERT INTO table VALUES('%q')", zText); -** sqlite3_exec(db, zSQL, 0, 0, 0); -** sqlite3_free(zSQL); -** </pre></blockquote> -** -** Because the %q format string is used, the '\'' character in zText -** is escaped and the SQL generated is as follows: -** -** <blockquote><pre> -** INSERT INTO table1 VALUES('It''s a happy day!') -** </pre></blockquote> -** -** This is correct. Had we used %s instead of %q, the generated SQL -** would have looked like this: -** -** <blockquote><pre> -** INSERT INTO table1 VALUES('It's a happy day!'); -** </pre></blockquote> -** -** This second example is an SQL syntax error. As a general rule you should -** always use %q instead of %s when inserting text into a string literal. -** -** ^(The %Q option works like %q except it also adds single quotes around -** the outside of the total string. Additionally, if the parameter in the -** argument list is a NULL pointer, %Q substitutes the text "NULL" (without -** single quotes).)^ So, for example, one could say: -** -** <blockquote><pre> -** char *zSQL = sqlite3_mprintf("INSERT INTO table VALUES(%Q)", zText); -** sqlite3_exec(db, zSQL, 0, 0, 0); -** sqlite3_free(zSQL); -** </pre></blockquote> -** -** The code above will render a correct SQL statement in the zSQL -** variable even if the zText variable is a NULL pointer. -** -** ^(The "%z" formatting option works like "%s" but with the -** addition that after the string has been read and copied into -** the result, [sqlite3_free()] is called on the input string.)^ -*/ -SQLITE_API char *sqlite3_mprintf(const char*,...); -SQLITE_API char *sqlite3_vmprintf(const char*, va_list); -SQLITE_API char *sqlite3_snprintf(int,char*,const char*, ...); -SQLITE_API char *sqlite3_vsnprintf(int,char*,const char*, va_list); - -/* -** CAPI3REF: Memory Allocation Subsystem -** -** The SQLite core uses these three routines for all of its own -** internal memory allocation needs. "Core" in the previous sentence -** does not include operating-system specific VFS implementation. The -** Windows VFS uses native malloc() and free() for some operations. -** -** ^The sqlite3_malloc() routine returns a pointer to a block -** of memory at least N bytes in length, where N is the parameter. -** ^If sqlite3_malloc() is unable to obtain sufficient free -** memory, it returns a NULL pointer. ^If the parameter N to -** sqlite3_malloc() is zero or negative then sqlite3_malloc() returns -** a NULL pointer. -** -** ^The sqlite3_malloc64(N) routine works just like -** sqlite3_malloc(N) except that N is an unsigned 64-bit integer instead -** of a signed 32-bit integer. -** -** ^Calling sqlite3_free() with a pointer previously returned -** by sqlite3_malloc() or sqlite3_realloc() releases that memory so -** that it might be reused. ^The sqlite3_free() routine is -** a no-op if is called with a NULL pointer. Passing a NULL pointer -** to sqlite3_free() is harmless. After being freed, memory -** should neither be read nor written. Even reading previously freed -** memory might result in a segmentation fault or other severe error. -** Memory corruption, a segmentation fault, or other severe error -** might result if sqlite3_free() is called with a non-NULL pointer that -** was not obtained from sqlite3_malloc() or sqlite3_realloc(). -** -** ^The sqlite3_realloc(X,N) interface attempts to resize a -** prior memory allocation X to be at least N bytes. -** ^If the X parameter to sqlite3_realloc(X,N) -** is a NULL pointer then its behavior is identical to calling -** sqlite3_malloc(N). -** ^If the N parameter to sqlite3_realloc(X,N) is zero or -** negative then the behavior is exactly the same as calling -** sqlite3_free(X). -** ^sqlite3_realloc(X,N) returns a pointer to a memory allocation -** of at least N bytes in size or NULL if insufficient memory is available. -** ^If M is the size of the prior allocation, then min(N,M) bytes -** of the prior allocation are copied into the beginning of buffer returned -** by sqlite3_realloc(X,N) and the prior allocation is freed. -** ^If sqlite3_realloc(X,N) returns NULL and N is positive, then the -** prior allocation is not freed. -** -** ^The sqlite3_realloc64(X,N) interfaces works the same as -** sqlite3_realloc(X,N) except that N is a 64-bit unsigned integer instead -** of a 32-bit signed integer. -** -** ^If X is a memory allocation previously obtained from sqlite3_malloc(), -** sqlite3_malloc64(), sqlite3_realloc(), or sqlite3_realloc64(), then -** sqlite3_msize(X) returns the size of that memory allocation in bytes. -** ^The value returned by sqlite3_msize(X) might be larger than the number -** of bytes requested when X was allocated. ^If X is a NULL pointer then -** sqlite3_msize(X) returns zero. If X points to something that is not -** the beginning of memory allocation, or if it points to a formerly -** valid memory allocation that has now been freed, then the behavior -** of sqlite3_msize(X) is undefined and possibly harmful. -** -** ^The memory returned by sqlite3_malloc(), sqlite3_realloc(), -** sqlite3_malloc64(), and sqlite3_realloc64() -** is always aligned to at least an 8 byte boundary, or to a -** 4 byte boundary if the [SQLITE_4_BYTE_ALIGNED_MALLOC] compile-time -** option is used. -** -** In SQLite version 3.5.0 and 3.5.1, it was possible to define -** the SQLITE_OMIT_MEMORY_ALLOCATION which would cause the built-in -** implementation of these routines to be omitted. That capability -** is no longer provided. Only built-in memory allocators can be used. -** -** Prior to SQLite version 3.7.10, the Windows OS interface layer called -** the system malloc() and free() directly when converting -** filenames between the UTF-8 encoding used by SQLite -** and whatever filename encoding is used by the particular Windows -** installation. Memory allocation errors were detected, but -** they were reported back as [SQLITE_CANTOPEN] or -** [SQLITE_IOERR] rather than [SQLITE_NOMEM]. -** -** The pointer arguments to [sqlite3_free()] and [sqlite3_realloc()] -** must be either NULL or else pointers obtained from a prior -** invocation of [sqlite3_malloc()] or [sqlite3_realloc()] that have -** not yet been released. -** -** The application must not read or write any part of -** a block of memory after it has been released using -** [sqlite3_free()] or [sqlite3_realloc()]. -*/ -SQLITE_API void *sqlite3_malloc(int); -SQLITE_API void *sqlite3_malloc64(sqlite3_uint64); -SQLITE_API void *sqlite3_realloc(void*, int); -SQLITE_API void *sqlite3_realloc64(void*, sqlite3_uint64); -SQLITE_API void sqlite3_free(void*); -SQLITE_API sqlite3_uint64 sqlite3_msize(void*); - -/* -** CAPI3REF: Memory Allocator Statistics -** -** SQLite provides these two interfaces for reporting on the status -** of the [sqlite3_malloc()], [sqlite3_free()], and [sqlite3_realloc()] -** routines, which form the built-in memory allocation subsystem. -** -** ^The [sqlite3_memory_used()] routine returns the number of bytes -** of memory currently outstanding (malloced but not freed). -** ^The [sqlite3_memory_highwater()] routine returns the maximum -** value of [sqlite3_memory_used()] since the high-water mark -** was last reset. ^The values returned by [sqlite3_memory_used()] and -** [sqlite3_memory_highwater()] include any overhead -** added by SQLite in its implementation of [sqlite3_malloc()], -** but not overhead added by the any underlying system library -** routines that [sqlite3_malloc()] may call. -** -** ^The memory high-water mark is reset to the current value of -** [sqlite3_memory_used()] if and only if the parameter to -** [sqlite3_memory_highwater()] is true. ^The value returned -** by [sqlite3_memory_highwater(1)] is the high-water mark -** prior to the reset. -*/ -SQLITE_API sqlite3_int64 sqlite3_memory_used(void); -SQLITE_API sqlite3_int64 sqlite3_memory_highwater(int resetFlag); - -/* -** CAPI3REF: Pseudo-Random Number Generator -** -** SQLite contains a high-quality pseudo-random number generator (PRNG) used to -** select random [ROWID | ROWIDs] when inserting new records into a table that -** already uses the largest possible [ROWID]. The PRNG is also used for -** the build-in random() and randomblob() SQL functions. This interface allows -** applications to access the same PRNG for other purposes. -** -** ^A call to this routine stores N bytes of randomness into buffer P. -** ^The P parameter can be a NULL pointer. -** -** ^If this routine has not been previously called or if the previous -** call had N less than one or a NULL pointer for P, then the PRNG is -** seeded using randomness obtained from the xRandomness method of -** the default [sqlite3_vfs] object. -** ^If the previous call to this routine had an N of 1 or more and a -** non-NULL P then the pseudo-randomness is generated -** internally and without recourse to the [sqlite3_vfs] xRandomness -** method. -*/ -SQLITE_API void sqlite3_randomness(int N, void *P); - -/* -** CAPI3REF: Compile-Time Authorization Callbacks -** -** ^This routine registers an authorizer callback with a particular -** [database connection], supplied in the first argument. -** ^The authorizer callback is invoked as SQL statements are being compiled -** by [sqlite3_prepare()] or its variants [sqlite3_prepare_v2()], -** [sqlite3_prepare16()] and [sqlite3_prepare16_v2()]. ^At various -** points during the compilation process, as logic is being created -** to perform various actions, the authorizer callback is invoked to -** see if those actions are allowed. ^The authorizer callback should -** return [SQLITE_OK] to allow the action, [SQLITE_IGNORE] to disallow the -** specific action but allow the SQL statement to continue to be -** compiled, or [SQLITE_DENY] to cause the entire SQL statement to be -** rejected with an error. ^If the authorizer callback returns -** any value other than [SQLITE_IGNORE], [SQLITE_OK], or [SQLITE_DENY] -** then the [sqlite3_prepare_v2()] or equivalent call that triggered -** the authorizer will fail with an error message. -** -** When the callback returns [SQLITE_OK], that means the operation -** requested is ok. ^When the callback returns [SQLITE_DENY], the -** [sqlite3_prepare_v2()] or equivalent call that triggered the -** authorizer will fail with an error message explaining that -** access is denied. -** -** ^The first parameter to the authorizer callback is a copy of the third -** parameter to the sqlite3_set_authorizer() interface. ^The second parameter -** to the callback is an integer [SQLITE_COPY | action code] that specifies -** the particular action to be authorized. ^The third through sixth parameters -** to the callback are zero-terminated strings that contain additional -** details about the action to be authorized. -** -** ^If the action code is [SQLITE_READ] -** and the callback returns [SQLITE_IGNORE] then the -** [prepared statement] statement is constructed to substitute -** a NULL value in place of the table column that would have -** been read if [SQLITE_OK] had been returned. The [SQLITE_IGNORE] -** return can be used to deny an untrusted user access to individual -** columns of a table. -** ^If the action code is [SQLITE_DELETE] and the callback returns -** [SQLITE_IGNORE] then the [DELETE] operation proceeds but the -** [truncate optimization] is disabled and all rows are deleted individually. -** -** An authorizer is used when [sqlite3_prepare | preparing] -** SQL statements from an untrusted source, to ensure that the SQL statements -** do not try to access data they are not allowed to see, or that they do not -** try to execute malicious statements that damage the database. For -** example, an application may allow a user to enter arbitrary -** SQL queries for evaluation by a database. But the application does -** not want the user to be able to make arbitrary changes to the -** database. An authorizer could then be put in place while the -** user-entered SQL is being [sqlite3_prepare | prepared] that -** disallows everything except [SELECT] statements. -** -** Applications that need to process SQL from untrusted sources -** might also consider lowering resource limits using [sqlite3_limit()] -** and limiting database size using the [max_page_count] [PRAGMA] -** in addition to using an authorizer. -** -** ^(Only a single authorizer can be in place on a database connection -** at a time. Each call to sqlite3_set_authorizer overrides the -** previous call.)^ ^Disable the authorizer by installing a NULL callback. -** The authorizer is disabled by default. -** -** The authorizer callback must not do anything that will modify -** the database connection that invoked the authorizer callback. -** Note that [sqlite3_prepare_v2()] and [sqlite3_step()] both modify their -** database connections for the meaning of "modify" in this paragraph. -** -** ^When [sqlite3_prepare_v2()] is used to prepare a statement, the -** statement might be re-prepared during [sqlite3_step()] due to a -** schema change. Hence, the application should ensure that the -** correct authorizer callback remains in place during the [sqlite3_step()]. -** -** ^Note that the authorizer callback is invoked only during -** [sqlite3_prepare()] or its variants. Authorization is not -** performed during statement evaluation in [sqlite3_step()], unless -** as stated in the previous paragraph, sqlite3_step() invokes -** sqlite3_prepare_v2() to reprepare a statement after a schema change. -*/ -SQLITE_API int sqlite3_set_authorizer( - sqlite3*, - int (*xAuth)(void*,int,const char*,const char*,const char*,const char*), - void *pUserData -); - -/* -** CAPI3REF: Authorizer Return Codes -** -** The [sqlite3_set_authorizer | authorizer callback function] must -** return either [SQLITE_OK] or one of these two constants in order -** to signal SQLite whether or not the action is permitted. See the -** [sqlite3_set_authorizer | authorizer documentation] for additional -** information. -** -** Note that SQLITE_IGNORE is also used as a [conflict resolution mode] -** returned from the [sqlite3_vtab_on_conflict()] interface. -*/ -#define SQLITE_DENY 1 /* Abort the SQL statement with an error */ -#define SQLITE_IGNORE 2 /* Don't allow access, but don't generate an error */ - -/* -** CAPI3REF: Authorizer Action Codes -** -** The [sqlite3_set_authorizer()] interface registers a callback function -** that is invoked to authorize certain SQL statement actions. The -** second parameter to the callback is an integer code that specifies -** what action is being authorized. These are the integer action codes that -** the authorizer callback may be passed. -** -** These action code values signify what kind of operation is to be -** authorized. The 3rd and 4th parameters to the authorization -** callback function will be parameters or NULL depending on which of these -** codes is used as the second parameter. ^(The 5th parameter to the -** authorizer callback is the name of the database ("main", "temp", -** etc.) if applicable.)^ ^The 6th parameter to the authorizer callback -** is the name of the inner-most trigger or view that is responsible for -** the access attempt or NULL if this access attempt is directly from -** top-level SQL code. -*/ -/******************************************* 3rd ************ 4th ***********/ -#define SQLITE_CREATE_INDEX 1 /* Index Name Table Name */ -#define SQLITE_CREATE_TABLE 2 /* Table Name NULL */ -#define SQLITE_CREATE_TEMP_INDEX 3 /* Index Name Table Name */ -#define SQLITE_CREATE_TEMP_TABLE 4 /* Table Name NULL */ -#define SQLITE_CREATE_TEMP_TRIGGER 5 /* Trigger Name Table Name */ -#define SQLITE_CREATE_TEMP_VIEW 6 /* View Name NULL */ -#define SQLITE_CREATE_TRIGGER 7 /* Trigger Name Table Name */ -#define SQLITE_CREATE_VIEW 8 /* View Name NULL */ -#define SQLITE_DELETE 9 /* Table Name NULL */ -#define SQLITE_DROP_INDEX 10 /* Index Name Table Name */ -#define SQLITE_DROP_TABLE 11 /* Table Name NULL */ -#define SQLITE_DROP_TEMP_INDEX 12 /* Index Name Table Name */ -#define SQLITE_DROP_TEMP_TABLE 13 /* Table Name NULL */ -#define SQLITE_DROP_TEMP_TRIGGER 14 /* Trigger Name Table Name */ -#define SQLITE_DROP_TEMP_VIEW 15 /* View Name NULL */ -#define SQLITE_DROP_TRIGGER 16 /* Trigger Name Table Name */ -#define SQLITE_DROP_VIEW 17 /* View Name NULL */ -#define SQLITE_INSERT 18 /* Table Name NULL */ -#define SQLITE_PRAGMA 19 /* Pragma Name 1st arg or NULL */ -#define SQLITE_READ 20 /* Table Name Column Name */ -#define SQLITE_SELECT 21 /* NULL NULL */ -#define SQLITE_TRANSACTION 22 /* Operation NULL */ -#define SQLITE_UPDATE 23 /* Table Name Column Name */ -#define SQLITE_ATTACH 24 /* Filename NULL */ -#define SQLITE_DETACH 25 /* Database Name NULL */ -#define SQLITE_ALTER_TABLE 26 /* Database Name Table Name */ -#define SQLITE_REINDEX 27 /* Index Name NULL */ -#define SQLITE_ANALYZE 28 /* Table Name NULL */ -#define SQLITE_CREATE_VTABLE 29 /* Table Name Module Name */ -#define SQLITE_DROP_VTABLE 30 /* Table Name Module Name */ -#define SQLITE_FUNCTION 31 /* NULL Function Name */ -#define SQLITE_SAVEPOINT 32 /* Operation Savepoint Name */ -#define SQLITE_COPY 0 /* No longer used */ -#define SQLITE_RECURSIVE 33 /* NULL NULL */ - -/* -** CAPI3REF: Tracing And Profiling Functions -** -** These routines register callback functions that can be used for -** tracing and profiling the execution of SQL statements. -** -** ^The callback function registered by sqlite3_trace() is invoked at -** various times when an SQL statement is being run by [sqlite3_step()]. -** ^The sqlite3_trace() callback is invoked with a UTF-8 rendering of the -** SQL statement text as the statement first begins executing. -** ^(Additional sqlite3_trace() callbacks might occur -** as each triggered subprogram is entered. The callbacks for triggers -** contain a UTF-8 SQL comment that identifies the trigger.)^ -** -** The [SQLITE_TRACE_SIZE_LIMIT] compile-time option can be used to limit -** the length of [bound parameter] expansion in the output of sqlite3_trace(). -** -** ^The callback function registered by sqlite3_profile() is invoked -** as each SQL statement finishes. ^The profile callback contains -** the original statement text and an estimate of wall-clock time -** of how long that statement took to run. ^The profile callback -** time is in units of nanoseconds, however the current implementation -** is only capable of millisecond resolution so the six least significant -** digits in the time are meaningless. Future versions of SQLite -** might provide greater resolution on the profiler callback. The -** sqlite3_profile() function is considered experimental and is -** subject to change in future versions of SQLite. -*/ -SQLITE_API void *sqlite3_trace(sqlite3*, void(*xTrace)(void*,const char*), void*); -SQLITE_API SQLITE_EXPERIMENTAL void *sqlite3_profile(sqlite3*, - void(*xProfile)(void*,const char*,sqlite3_uint64), void*); - -/* -** CAPI3REF: Query Progress Callbacks -** -** ^The sqlite3_progress_handler(D,N,X,P) interface causes the callback -** function X to be invoked periodically during long running calls to -** [sqlite3_exec()], [sqlite3_step()] and [sqlite3_get_table()] for -** database connection D. An example use for this -** interface is to keep a GUI updated during a large query. -** -** ^The parameter P is passed through as the only parameter to the -** callback function X. ^The parameter N is the approximate number of -** [virtual machine instructions] that are evaluated between successive -** invocations of the callback X. ^If N is less than one then the progress -** handler is disabled. -** -** ^Only a single progress handler may be defined at one time per -** [database connection]; setting a new progress handler cancels the -** old one. ^Setting parameter X to NULL disables the progress handler. -** ^The progress handler is also disabled by setting N to a value less -** than 1. -** -** ^If the progress callback returns non-zero, the operation is -** interrupted. This feature can be used to implement a -** "Cancel" button on a GUI progress dialog box. -** -** The progress handler callback must not do anything that will modify -** the database connection that invoked the progress handler. -** Note that [sqlite3_prepare_v2()] and [sqlite3_step()] both modify their -** database connections for the meaning of "modify" in this paragraph. -** -*/ -SQLITE_API void sqlite3_progress_handler(sqlite3*, int, int(*)(void*), void*); - -/* -** CAPI3REF: Opening A New Database Connection -** -** ^These routines open an SQLite database file as specified by the -** filename argument. ^The filename argument is interpreted as UTF-8 for -** sqlite3_open() and sqlite3_open_v2() and as UTF-16 in the native byte -** order for sqlite3_open16(). ^(A [database connection] handle is usually -** returned in *ppDb, even if an error occurs. The only exception is that -** if SQLite is unable to allocate memory to hold the [sqlite3] object, -** a NULL will be written into *ppDb instead of a pointer to the [sqlite3] -** object.)^ ^(If the database is opened (and/or created) successfully, then -** [SQLITE_OK] is returned. Otherwise an [error code] is returned.)^ ^The -** [sqlite3_errmsg()] or [sqlite3_errmsg16()] routines can be used to obtain -** an English language description of the error following a failure of any -** of the sqlite3_open() routines. -** -** ^The default encoding will be UTF-8 for databases created using -** sqlite3_open() or sqlite3_open_v2(). ^The default encoding for databases -** created using sqlite3_open16() will be UTF-16 in the native byte order. -** -** Whether or not an error occurs when it is opened, resources -** associated with the [database connection] handle should be released by -** passing it to [sqlite3_close()] when it is no longer required. -** -** The sqlite3_open_v2() interface works like sqlite3_open() -** except that it accepts two additional parameters for additional control -** over the new database connection. ^(The flags parameter to -** sqlite3_open_v2() can take one of -** the following three values, optionally combined with the -** [SQLITE_OPEN_NOMUTEX], [SQLITE_OPEN_FULLMUTEX], [SQLITE_OPEN_SHAREDCACHE], -** [SQLITE_OPEN_PRIVATECACHE], and/or [SQLITE_OPEN_URI] flags:)^ -** -** <dl> -** ^(<dt>[SQLITE_OPEN_READONLY]</dt> -** <dd>The database is opened in read-only mode. If the database does not -** already exist, an error is returned.</dd>)^ -** -** ^(<dt>[SQLITE_OPEN_READWRITE]</dt> -** <dd>The database is opened for reading and writing if possible, or reading -** only if the file is write protected by the operating system. In either -** case the database must already exist, otherwise an error is returned.</dd>)^ -** -** ^(<dt>[SQLITE_OPEN_READWRITE] | [SQLITE_OPEN_CREATE]</dt> -** <dd>The database is opened for reading and writing, and is created if -** it does not already exist. This is the behavior that is always used for -** sqlite3_open() and sqlite3_open16().</dd>)^ -** </dl> -** -** If the 3rd parameter to sqlite3_open_v2() is not one of the -** combinations shown above optionally combined with other -** [SQLITE_OPEN_READONLY | SQLITE_OPEN_* bits] -** then the behavior is undefined. -** -** ^If the [SQLITE_OPEN_NOMUTEX] flag is set, then the database connection -** opens in the multi-thread [threading mode] as long as the single-thread -** mode has not been set at compile-time or start-time. ^If the -** [SQLITE_OPEN_FULLMUTEX] flag is set then the database connection opens -** in the serialized [threading mode] unless single-thread was -** previously selected at compile-time or start-time. -** ^The [SQLITE_OPEN_SHAREDCACHE] flag causes the database connection to be -** eligible to use [shared cache mode], regardless of whether or not shared -** cache is enabled using [sqlite3_enable_shared_cache()]. ^The -** [SQLITE_OPEN_PRIVATECACHE] flag causes the database connection to not -** participate in [shared cache mode] even if it is enabled. -** -** ^The fourth parameter to sqlite3_open_v2() is the name of the -** [sqlite3_vfs] object that defines the operating system interface that -** the new database connection should use. ^If the fourth parameter is -** a NULL pointer then the default [sqlite3_vfs] object is used. -** -** ^If the filename is ":memory:", then a private, temporary in-memory database -** is created for the connection. ^This in-memory database will vanish when -** the database connection is closed. Future versions of SQLite might -** make use of additional special filenames that begin with the ":" character. -** It is recommended that when a database filename actually does begin with -** a ":" character you should prefix the filename with a pathname such as -** "./" to avoid ambiguity. -** -** ^If the filename is an empty string, then a private, temporary -** on-disk database will be created. ^This private database will be -** automatically deleted as soon as the database connection is closed. -** -** [[URI filenames in sqlite3_open()]] <h3>URI Filenames</h3> -** -** ^If [URI filename] interpretation is enabled, and the filename argument -** begins with "file:", then the filename is interpreted as a URI. ^URI -** filename interpretation is enabled if the [SQLITE_OPEN_URI] flag is -** set in the fourth argument to sqlite3_open_v2(), or if it has -** been enabled globally using the [SQLITE_CONFIG_URI] option with the -** [sqlite3_config()] method or by the [SQLITE_USE_URI] compile-time option. -** As of SQLite version 3.7.7, URI filename interpretation is turned off -** by default, but future releases of SQLite might enable URI filename -** interpretation by default. See "[URI filenames]" for additional -** information. -** -** URI filenames are parsed according to RFC 3986. ^If the URI contains an -** authority, then it must be either an empty string or the string -** "localhost". ^If the authority is not an empty string or "localhost", an -** error is returned to the caller. ^The fragment component of a URI, if -** present, is ignored. -** -** ^SQLite uses the path component of the URI as the name of the disk file -** which contains the database. ^If the path begins with a '/' character, -** then it is interpreted as an absolute path. ^If the path does not begin -** with a '/' (meaning that the authority section is omitted from the URI) -** then the path is interpreted as a relative path. -** ^(On windows, the first component of an absolute path -** is a drive specification (e.g. "C:").)^ -** -** [[core URI query parameters]] -** The query component of a URI may contain parameters that are interpreted -** either by SQLite itself, or by a [VFS | custom VFS implementation]. -** SQLite and its built-in [VFSes] interpret the -** following query parameters: -** -** <ul> -** <li> <b>vfs</b>: ^The "vfs" parameter may be used to specify the name of -** a VFS object that provides the operating system interface that should -** be used to access the database file on disk. ^If this option is set to -** an empty string the default VFS object is used. ^Specifying an unknown -** VFS is an error. ^If sqlite3_open_v2() is used and the vfs option is -** present, then the VFS specified by the option takes precedence over -** the value passed as the fourth parameter to sqlite3_open_v2(). -** -** <li> <b>mode</b>: ^(The mode parameter may be set to either "ro", "rw", -** "rwc", or "memory". Attempting to set it to any other value is -** an error)^. -** ^If "ro" is specified, then the database is opened for read-only -** access, just as if the [SQLITE_OPEN_READONLY] flag had been set in the -** third argument to sqlite3_open_v2(). ^If the mode option is set to -** "rw", then the database is opened for read-write (but not create) -** access, as if SQLITE_OPEN_READWRITE (but not SQLITE_OPEN_CREATE) had -** been set. ^Value "rwc" is equivalent to setting both -** SQLITE_OPEN_READWRITE and SQLITE_OPEN_CREATE. ^If the mode option is -** set to "memory" then a pure [in-memory database] that never reads -** or writes from disk is used. ^It is an error to specify a value for -** the mode parameter that is less restrictive than that specified by -** the flags passed in the third parameter to sqlite3_open_v2(). -** -** <li> <b>cache</b>: ^The cache parameter may be set to either "shared" or -** "private". ^Setting it to "shared" is equivalent to setting the -** SQLITE_OPEN_SHAREDCACHE bit in the flags argument passed to -** sqlite3_open_v2(). ^Setting the cache parameter to "private" is -** equivalent to setting the SQLITE_OPEN_PRIVATECACHE bit. -** ^If sqlite3_open_v2() is used and the "cache" parameter is present in -** a URI filename, its value overrides any behavior requested by setting -** SQLITE_OPEN_PRIVATECACHE or SQLITE_OPEN_SHAREDCACHE flag. -** -** <li> <b>psow</b>: ^The psow parameter indicates whether or not the -** [powersafe overwrite] property does or does not apply to the -** storage media on which the database file resides. -** -** <li> <b>nolock</b>: ^The nolock parameter is a boolean query parameter -** which if set disables file locking in rollback journal modes. This -** is useful for accessing a database on a filesystem that does not -** support locking. Caution: Database corruption might result if two -** or more processes write to the same database and any one of those -** processes uses nolock=1. -** -** <li> <b>immutable</b>: ^The immutable parameter is a boolean query -** parameter that indicates that the database file is stored on -** read-only media. ^When immutable is set, SQLite assumes that the -** database file cannot be changed, even by a process with higher -** privilege, and so the database is opened read-only and all locking -** and change detection is disabled. Caution: Setting the immutable -** property on a database file that does in fact change can result -** in incorrect query results and/or [SQLITE_CORRUPT] errors. -** See also: [SQLITE_IOCAP_IMMUTABLE]. -** -** </ul> -** -** ^Specifying an unknown parameter in the query component of a URI is not an -** error. Future versions of SQLite might understand additional query -** parameters. See "[query parameters with special meaning to SQLite]" for -** additional information. -** -** [[URI filename examples]] <h3>URI filename examples</h3> -** -** <table border="1" align=center cellpadding=5> -** <tr><th> URI filenames <th> Results -** <tr><td> file:data.db <td> -** Open the file "data.db" in the current directory. -** <tr><td> file:/home/fred/data.db<br> -** file:///home/fred/data.db <br> -** file://localhost/home/fred/data.db <br> <td> -** Open the database file "/home/fred/data.db". -** <tr><td> file://darkstar/home/fred/data.db <td> -** An error. "darkstar" is not a recognized authority. -** <tr><td style="white-space:nowrap"> -** file:///C:/Documents%20and%20Settings/fred/Desktop/data.db -** <td> Windows only: Open the file "data.db" on fred's desktop on drive -** C:. Note that the %20 escaping in this example is not strictly -** necessary - space characters can be used literally -** in URI filenames. -** <tr><td> file:data.db?mode=ro&cache=private <td> -** Open file "data.db" in the current directory for read-only access. -** Regardless of whether or not shared-cache mode is enabled by -** default, use a private cache. -** <tr><td> file:/home/fred/data.db?vfs=unix-dotfile <td> -** Open file "/home/fred/data.db". Use the special VFS "unix-dotfile" -** that uses dot-files in place of posix advisory locking. -** <tr><td> file:data.db?mode=readonly <td> -** An error. "readonly" is not a valid option for the "mode" parameter. -** </table> -** -** ^URI hexadecimal escape sequences (%HH) are supported within the path and -** query components of a URI. A hexadecimal escape sequence consists of a -** percent sign - "%" - followed by exactly two hexadecimal digits -** specifying an octet value. ^Before the path or query components of a -** URI filename are interpreted, they are encoded using UTF-8 and all -** hexadecimal escape sequences replaced by a single byte containing the -** corresponding octet. If this process generates an invalid UTF-8 encoding, -** the results are undefined. -** -** <b>Note to Windows users:</b> The encoding used for the filename argument -** of sqlite3_open() and sqlite3_open_v2() must be UTF-8, not whatever -** codepage is currently defined. Filenames containing international -** characters must be converted to UTF-8 prior to passing them into -** sqlite3_open() or sqlite3_open_v2(). -** -** <b>Note to Windows Runtime users:</b> The temporary directory must be set -** prior to calling sqlite3_open() or sqlite3_open_v2(). Otherwise, various -** features that require the use of temporary files may fail. -** -** See also: [sqlite3_temp_directory] -*/ -SQLITE_API int sqlite3_open( - const char *filename, /* Database filename (UTF-8) */ - sqlite3 **ppDb /* OUT: SQLite db handle */ -); -SQLITE_API int sqlite3_open16( - const void *filename, /* Database filename (UTF-16) */ - sqlite3 **ppDb /* OUT: SQLite db handle */ -); -SQLITE_API int sqlite3_open_v2( - const char *filename, /* Database filename (UTF-8) */ - sqlite3 **ppDb, /* OUT: SQLite db handle */ - int flags, /* Flags */ - const char *zVfs /* Name of VFS module to use */ -); - -/* -** CAPI3REF: Obtain Values For URI Parameters -** -** These are utility routines, useful to VFS implementations, that check -** to see if a database file was a URI that contained a specific query -** parameter, and if so obtains the value of that query parameter. -** -** If F is the database filename pointer passed into the xOpen() method of -** a VFS implementation when the flags parameter to xOpen() has one or -** more of the [SQLITE_OPEN_URI] or [SQLITE_OPEN_MAIN_DB] bits set and -** P is the name of the query parameter, then -** sqlite3_uri_parameter(F,P) returns the value of the P -** parameter if it exists or a NULL pointer if P does not appear as a -** query parameter on F. If P is a query parameter of F -** has no explicit value, then sqlite3_uri_parameter(F,P) returns -** a pointer to an empty string. -** -** The sqlite3_uri_boolean(F,P,B) routine assumes that P is a boolean -** parameter and returns true (1) or false (0) according to the value -** of P. The sqlite3_uri_boolean(F,P,B) routine returns true (1) if the -** value of query parameter P is one of "yes", "true", or "on" in any -** case or if the value begins with a non-zero number. The -** sqlite3_uri_boolean(F,P,B) routines returns false (0) if the value of -** query parameter P is one of "no", "false", or "off" in any case or -** if the value begins with a numeric zero. If P is not a query -** parameter on F or if the value of P is does not match any of the -** above, then sqlite3_uri_boolean(F,P,B) returns (B!=0). -** -** The sqlite3_uri_int64(F,P,D) routine converts the value of P into a -** 64-bit signed integer and returns that integer, or D if P does not -** exist. If the value of P is something other than an integer, then -** zero is returned. -** -** If F is a NULL pointer, then sqlite3_uri_parameter(F,P) returns NULL and -** sqlite3_uri_boolean(F,P,B) returns B. If F is not a NULL pointer and -** is not a database file pathname pointer that SQLite passed into the xOpen -** VFS method, then the behavior of this routine is undefined and probably -** undesirable. -*/ -SQLITE_API const char *sqlite3_uri_parameter(const char *zFilename, const char *zParam); -SQLITE_API int sqlite3_uri_boolean(const char *zFile, const char *zParam, int bDefault); -SQLITE_API sqlite3_int64 sqlite3_uri_int64(const char*, const char*, sqlite3_int64); - - -/* -** CAPI3REF: Error Codes And Messages -** -** ^The sqlite3_errcode() interface returns the numeric [result code] or -** [extended result code] for the most recent failed sqlite3_* API call -** associated with a [database connection]. If a prior API call failed -** but the most recent API call succeeded, the return value from -** sqlite3_errcode() is undefined. ^The sqlite3_extended_errcode() -** interface is the same except that it always returns the -** [extended result code] even when extended result codes are -** disabled. -** -** ^The sqlite3_errmsg() and sqlite3_errmsg16() return English-language -** text that describes the error, as either UTF-8 or UTF-16 respectively. -** ^(Memory to hold the error message string is managed internally. -** The application does not need to worry about freeing the result. -** However, the error string might be overwritten or deallocated by -** subsequent calls to other SQLite interface functions.)^ -** -** ^The sqlite3_errstr() interface returns the English-language text -** that describes the [result code], as UTF-8. -** ^(Memory to hold the error message string is managed internally -** and must not be freed by the application)^. -** -** When the serialized [threading mode] is in use, it might be the -** case that a second error occurs on a separate thread in between -** the time of the first error and the call to these interfaces. -** When that happens, the second error will be reported since these -** interfaces always report the most recent result. To avoid -** this, each thread can obtain exclusive use of the [database connection] D -** by invoking [sqlite3_mutex_enter]([sqlite3_db_mutex](D)) before beginning -** to use D and invoking [sqlite3_mutex_leave]([sqlite3_db_mutex](D)) after -** all calls to the interfaces listed here are completed. -** -** If an interface fails with SQLITE_MISUSE, that means the interface -** was invoked incorrectly by the application. In that case, the -** error code and message may or may not be set. -*/ -SQLITE_API int sqlite3_errcode(sqlite3 *db); -SQLITE_API int sqlite3_extended_errcode(sqlite3 *db); -SQLITE_API const char *sqlite3_errmsg(sqlite3*); -SQLITE_API const void *sqlite3_errmsg16(sqlite3*); -SQLITE_API const char *sqlite3_errstr(int); - -/* -** CAPI3REF: SQL Statement Object -** KEYWORDS: {prepared statement} {prepared statements} -** -** An instance of this object represents a single SQL statement. -** This object is variously known as a "prepared statement" or a -** "compiled SQL statement" or simply as a "statement". -** -** The life of a statement object goes something like this: -** -** <ol> -** <li> Create the object using [sqlite3_prepare_v2()] or a related -** function. -** <li> Bind values to [host parameters] using the sqlite3_bind_*() -** interfaces. -** <li> Run the SQL by calling [sqlite3_step()] one or more times. -** <li> Reset the statement using [sqlite3_reset()] then go back -** to step 2. Do this zero or more times. -** <li> Destroy the object using [sqlite3_finalize()]. -** </ol> -** -** Refer to documentation on individual methods above for additional -** information. -*/ -typedef struct sqlite3_stmt sqlite3_stmt; - -/* -** CAPI3REF: Run-time Limits -** -** ^(This interface allows the size of various constructs to be limited -** on a connection by connection basis. The first parameter is the -** [database connection] whose limit is to be set or queried. The -** second parameter is one of the [limit categories] that define a -** class of constructs to be size limited. The third parameter is the -** new limit for that construct.)^ -** -** ^If the new limit is a negative number, the limit is unchanged. -** ^(For each limit category SQLITE_LIMIT_<i>NAME</i> there is a -** [limits | hard upper bound] -** set at compile-time by a C preprocessor macro called -** [limits | SQLITE_MAX_<i>NAME</i>]. -** (The "_LIMIT_" in the name is changed to "_MAX_".))^ -** ^Attempts to increase a limit above its hard upper bound are -** silently truncated to the hard upper bound. -** -** ^Regardless of whether or not the limit was changed, the -** [sqlite3_limit()] interface returns the prior value of the limit. -** ^Hence, to find the current value of a limit without changing it, -** simply invoke this interface with the third parameter set to -1. -** -** Run-time limits are intended for use in applications that manage -** both their own internal database and also databases that are controlled -** by untrusted external sources. An example application might be a -** web browser that has its own databases for storing history and -** separate databases controlled by JavaScript applications downloaded -** off the Internet. The internal databases can be given the -** large, default limits. Databases managed by external sources can -** be given much smaller limits designed to prevent a denial of service -** attack. Developers might also want to use the [sqlite3_set_authorizer()] -** interface to further control untrusted SQL. The size of the database -** created by an untrusted script can be contained using the -** [max_page_count] [PRAGMA]. -** -** New run-time limit categories may be added in future releases. -*/ -SQLITE_API int sqlite3_limit(sqlite3*, int id, int newVal); - -/* -** CAPI3REF: Run-Time Limit Categories -** KEYWORDS: {limit category} {*limit categories} -** -** These constants define various performance limits -** that can be lowered at run-time using [sqlite3_limit()]. -** The synopsis of the meanings of the various limits is shown below. -** Additional information is available at [limits | Limits in SQLite]. -** -** <dl> -** [[SQLITE_LIMIT_LENGTH]] ^(<dt>SQLITE_LIMIT_LENGTH</dt> -** <dd>The maximum size of any string or BLOB or table row, in bytes.<dd>)^ -** -** [[SQLITE_LIMIT_SQL_LENGTH]] ^(<dt>SQLITE_LIMIT_SQL_LENGTH</dt> -** <dd>The maximum length of an SQL statement, in bytes.</dd>)^ -** -** [[SQLITE_LIMIT_COLUMN]] ^(<dt>SQLITE_LIMIT_COLUMN</dt> -** <dd>The maximum number of columns in a table definition or in the -** result set of a [SELECT] or the maximum number of columns in an index -** or in an ORDER BY or GROUP BY clause.</dd>)^ -** -** [[SQLITE_LIMIT_EXPR_DEPTH]] ^(<dt>SQLITE_LIMIT_EXPR_DEPTH</dt> -** <dd>The maximum depth of the parse tree on any expression.</dd>)^ -** -** [[SQLITE_LIMIT_COMPOUND_SELECT]] ^(<dt>SQLITE_LIMIT_COMPOUND_SELECT</dt> -** <dd>The maximum number of terms in a compound SELECT statement.</dd>)^ -** -** [[SQLITE_LIMIT_VDBE_OP]] ^(<dt>SQLITE_LIMIT_VDBE_OP</dt> -** <dd>The maximum number of instructions in a virtual machine program -** used to implement an SQL statement. This limit is not currently -** enforced, though that might be added in some future release of -** SQLite.</dd>)^ -** -** [[SQLITE_LIMIT_FUNCTION_ARG]] ^(<dt>SQLITE_LIMIT_FUNCTION_ARG</dt> -** <dd>The maximum number of arguments on a function.</dd>)^ -** -** [[SQLITE_LIMIT_ATTACHED]] ^(<dt>SQLITE_LIMIT_ATTACHED</dt> -** <dd>The maximum number of [ATTACH | attached databases].)^</dd> -** -** [[SQLITE_LIMIT_LIKE_PATTERN_LENGTH]] -** ^(<dt>SQLITE_LIMIT_LIKE_PATTERN_LENGTH</dt> -** <dd>The maximum length of the pattern argument to the [LIKE] or -** [GLOB] operators.</dd>)^ -** -** [[SQLITE_LIMIT_VARIABLE_NUMBER]] -** ^(<dt>SQLITE_LIMIT_VARIABLE_NUMBER</dt> -** <dd>The maximum index number of any [parameter] in an SQL statement.)^ -** -** [[SQLITE_LIMIT_TRIGGER_DEPTH]] ^(<dt>SQLITE_LIMIT_TRIGGER_DEPTH</dt> -** <dd>The maximum depth of recursion for triggers.</dd>)^ -** -** [[SQLITE_LIMIT_WORKER_THREADS]] ^(<dt>SQLITE_LIMIT_WORKER_THREADS</dt> -** <dd>The maximum number of auxiliary worker threads that a single -** [prepared statement] may start.</dd>)^ -** </dl> -*/ -#define SQLITE_LIMIT_LENGTH 0 -#define SQLITE_LIMIT_SQL_LENGTH 1 -#define SQLITE_LIMIT_COLUMN 2 -#define SQLITE_LIMIT_EXPR_DEPTH 3 -#define SQLITE_LIMIT_COMPOUND_SELECT 4 -#define SQLITE_LIMIT_VDBE_OP 5 -#define SQLITE_LIMIT_FUNCTION_ARG 6 -#define SQLITE_LIMIT_ATTACHED 7 -#define SQLITE_LIMIT_LIKE_PATTERN_LENGTH 8 -#define SQLITE_LIMIT_VARIABLE_NUMBER 9 -#define SQLITE_LIMIT_TRIGGER_DEPTH 10 -#define SQLITE_LIMIT_WORKER_THREADS 11 - -/* -** CAPI3REF: Compiling An SQL Statement -** KEYWORDS: {SQL statement compiler} -** -** To execute an SQL query, it must first be compiled into a byte-code -** program using one of these routines. -** -** The first argument, "db", is a [database connection] obtained from a -** prior successful call to [sqlite3_open()], [sqlite3_open_v2()] or -** [sqlite3_open16()]. The database connection must not have been closed. -** -** The second argument, "zSql", is the statement to be compiled, encoded -** as either UTF-8 or UTF-16. The sqlite3_prepare() and sqlite3_prepare_v2() -** interfaces use UTF-8, and sqlite3_prepare16() and sqlite3_prepare16_v2() -** use UTF-16. -** -** ^If the nByte argument is less than zero, then zSql is read up to the -** first zero terminator. ^If nByte is non-negative, then it is the maximum -** number of bytes read from zSql. ^When nByte is non-negative, the -** zSql string ends at either the first '\000' or '\u0000' character or -** the nByte-th byte, whichever comes first. If the caller knows -** that the supplied string is nul-terminated, then there is a small -** performance advantage to be gained by passing an nByte parameter that -** is equal to the number of bytes in the input string <i>including</i> -** the nul-terminator bytes as this saves SQLite from having to -** make a copy of the input string. -** -** ^If pzTail is not NULL then *pzTail is made to point to the first byte -** past the end of the first SQL statement in zSql. These routines only -** compile the first statement in zSql, so *pzTail is left pointing to -** what remains uncompiled. -** -** ^*ppStmt is left pointing to a compiled [prepared statement] that can be -** executed using [sqlite3_step()]. ^If there is an error, *ppStmt is set -** to NULL. ^If the input text contains no SQL (if the input is an empty -** string or a comment) then *ppStmt is set to NULL. -** The calling procedure is responsible for deleting the compiled -** SQL statement using [sqlite3_finalize()] after it has finished with it. -** ppStmt may not be NULL. -** -** ^On success, the sqlite3_prepare() family of routines return [SQLITE_OK]; -** otherwise an [error code] is returned. -** -** The sqlite3_prepare_v2() and sqlite3_prepare16_v2() interfaces are -** recommended for all new programs. The two older interfaces are retained -** for backwards compatibility, but their use is discouraged. -** ^In the "v2" interfaces, the prepared statement -** that is returned (the [sqlite3_stmt] object) contains a copy of the -** original SQL text. This causes the [sqlite3_step()] interface to -** behave differently in three ways: -** -** <ol> -** <li> -** ^If the database schema changes, instead of returning [SQLITE_SCHEMA] as it -** always used to do, [sqlite3_step()] will automatically recompile the SQL -** statement and try to run it again. As many as [SQLITE_MAX_SCHEMA_RETRY] -** retries will occur before sqlite3_step() gives up and returns an error. -** </li> -** -** <li> -** ^When an error occurs, [sqlite3_step()] will return one of the detailed -** [error codes] or [extended error codes]. ^The legacy behavior was that -** [sqlite3_step()] would only return a generic [SQLITE_ERROR] result code -** and the application would have to make a second call to [sqlite3_reset()] -** in order to find the underlying cause of the problem. With the "v2" prepare -** interfaces, the underlying reason for the error is returned immediately. -** </li> -** -** <li> -** ^If the specific value bound to [parameter | host parameter] in the -** WHERE clause might influence the choice of query plan for a statement, -** then the statement will be automatically recompiled, as if there had been -** a schema change, on the first [sqlite3_step()] call following any change -** to the [sqlite3_bind_text | bindings] of that [parameter]. -** ^The specific value of WHERE-clause [parameter] might influence the -** choice of query plan if the parameter is the left-hand side of a [LIKE] -** or [GLOB] operator or if the parameter is compared to an indexed column -** and the [SQLITE_ENABLE_STAT3] compile-time option is enabled. -** </li> -** </ol> -*/ -SQLITE_API int sqlite3_prepare( - sqlite3 *db, /* Database handle */ - const char *zSql, /* SQL statement, UTF-8 encoded */ - int nByte, /* Maximum length of zSql in bytes. */ - sqlite3_stmt **ppStmt, /* OUT: Statement handle */ - const char **pzTail /* OUT: Pointer to unused portion of zSql */ -); -SQLITE_API int sqlite3_prepare_v2( - sqlite3 *db, /* Database handle */ - const char *zSql, /* SQL statement, UTF-8 encoded */ - int nByte, /* Maximum length of zSql in bytes. */ - sqlite3_stmt **ppStmt, /* OUT: Statement handle */ - const char **pzTail /* OUT: Pointer to unused portion of zSql */ -); -SQLITE_API int sqlite3_prepare16( - sqlite3 *db, /* Database handle */ - const void *zSql, /* SQL statement, UTF-16 encoded */ - int nByte, /* Maximum length of zSql in bytes. */ - sqlite3_stmt **ppStmt, /* OUT: Statement handle */ - const void **pzTail /* OUT: Pointer to unused portion of zSql */ -); -SQLITE_API int sqlite3_prepare16_v2( - sqlite3 *db, /* Database handle */ - const void *zSql, /* SQL statement, UTF-16 encoded */ - int nByte, /* Maximum length of zSql in bytes. */ - sqlite3_stmt **ppStmt, /* OUT: Statement handle */ - const void **pzTail /* OUT: Pointer to unused portion of zSql */ -); - -/* -** CAPI3REF: Retrieving Statement SQL -** -** ^This interface can be used to retrieve a saved copy of the original -** SQL text used to create a [prepared statement] if that statement was -** compiled using either [sqlite3_prepare_v2()] or [sqlite3_prepare16_v2()]. -*/ -SQLITE_API const char *sqlite3_sql(sqlite3_stmt *pStmt); - -/* -** CAPI3REF: Determine If An SQL Statement Writes The Database -** -** ^The sqlite3_stmt_readonly(X) interface returns true (non-zero) if -** and only if the [prepared statement] X makes no direct changes to -** the content of the database file. -** -** Note that [application-defined SQL functions] or -** [virtual tables] might change the database indirectly as a side effect. -** ^(For example, if an application defines a function "eval()" that -** calls [sqlite3_exec()], then the following SQL statement would -** change the database file through side-effects: -** -** <blockquote><pre> -** SELECT eval('DELETE FROM t1') FROM t2; -** </pre></blockquote> -** -** But because the [SELECT] statement does not change the database file -** directly, sqlite3_stmt_readonly() would still return true.)^ -** -** ^Transaction control statements such as [BEGIN], [COMMIT], [ROLLBACK], -** [SAVEPOINT], and [RELEASE] cause sqlite3_stmt_readonly() to return true, -** since the statements themselves do not actually modify the database but -** rather they control the timing of when other statements modify the -** database. ^The [ATTACH] and [DETACH] statements also cause -** sqlite3_stmt_readonly() to return true since, while those statements -** change the configuration of a database connection, they do not make -** changes to the content of the database files on disk. -*/ -SQLITE_API int sqlite3_stmt_readonly(sqlite3_stmt *pStmt); - -/* -** CAPI3REF: Determine If A Prepared Statement Has Been Reset -** -** ^The sqlite3_stmt_busy(S) interface returns true (non-zero) if the -** [prepared statement] S has been stepped at least once using -** [sqlite3_step(S)] but has not run to completion and/or has not -** been reset using [sqlite3_reset(S)]. ^The sqlite3_stmt_busy(S) -** interface returns false if S is a NULL pointer. If S is not a -** NULL pointer and is not a pointer to a valid [prepared statement] -** object, then the behavior is undefined and probably undesirable. -** -** This interface can be used in combination [sqlite3_next_stmt()] -** to locate all prepared statements associated with a database -** connection that are in need of being reset. This can be used, -** for example, in diagnostic routines to search for prepared -** statements that are holding a transaction open. -*/ -SQLITE_API int sqlite3_stmt_busy(sqlite3_stmt*); - -/* -** CAPI3REF: Dynamically Typed Value Object -** KEYWORDS: {protected sqlite3_value} {unprotected sqlite3_value} -** -** SQLite uses the sqlite3_value object to represent all values -** that can be stored in a database table. SQLite uses dynamic typing -** for the values it stores. ^Values stored in sqlite3_value objects -** can be integers, floating point values, strings, BLOBs, or NULL. -** -** An sqlite3_value object may be either "protected" or "unprotected". -** Some interfaces require a protected sqlite3_value. Other interfaces -** will accept either a protected or an unprotected sqlite3_value. -** Every interface that accepts sqlite3_value arguments specifies -** whether or not it requires a protected sqlite3_value. -** -** The terms "protected" and "unprotected" refer to whether or not -** a mutex is held. An internal mutex is held for a protected -** sqlite3_value object but no mutex is held for an unprotected -** sqlite3_value object. If SQLite is compiled to be single-threaded -** (with [SQLITE_THREADSAFE=0] and with [sqlite3_threadsafe()] returning 0) -** or if SQLite is run in one of reduced mutex modes -** [SQLITE_CONFIG_SINGLETHREAD] or [SQLITE_CONFIG_MULTITHREAD] -** then there is no distinction between protected and unprotected -** sqlite3_value objects and they can be used interchangeably. However, -** for maximum code portability it is recommended that applications -** still make the distinction between protected and unprotected -** sqlite3_value objects even when not strictly required. -** -** ^The sqlite3_value objects that are passed as parameters into the -** implementation of [application-defined SQL functions] are protected. -** ^The sqlite3_value object returned by -** [sqlite3_column_value()] is unprotected. -** Unprotected sqlite3_value objects may only be used with -** [sqlite3_result_value()] and [sqlite3_bind_value()]. -** The [sqlite3_value_blob | sqlite3_value_type()] family of -** interfaces require protected sqlite3_value objects. -*/ -typedef struct Mem sqlite3_value; - -/* -** CAPI3REF: SQL Function Context Object -** -** The context in which an SQL function executes is stored in an -** sqlite3_context object. ^A pointer to an sqlite3_context object -** is always first parameter to [application-defined SQL functions]. -** The application-defined SQL function implementation will pass this -** pointer through into calls to [sqlite3_result_int | sqlite3_result()], -** [sqlite3_aggregate_context()], [sqlite3_user_data()], -** [sqlite3_context_db_handle()], [sqlite3_get_auxdata()], -** and/or [sqlite3_set_auxdata()]. -*/ -typedef struct sqlite3_context sqlite3_context; - -/* -** CAPI3REF: Binding Values To Prepared Statements -** KEYWORDS: {host parameter} {host parameters} {host parameter name} -** KEYWORDS: {SQL parameter} {SQL parameters} {parameter binding} -** -** ^(In the SQL statement text input to [sqlite3_prepare_v2()] and its variants, -** literals may be replaced by a [parameter] that matches one of following -** templates: -** -** <ul> -** <li> ? -** <li> ?NNN -** <li> :VVV -** <li> @VVV -** <li> $VVV -** </ul> -** -** In the templates above, NNN represents an integer literal, -** and VVV represents an alphanumeric identifier.)^ ^The values of these -** parameters (also called "host parameter names" or "SQL parameters") -** can be set using the sqlite3_bind_*() routines defined here. -** -** ^The first argument to the sqlite3_bind_*() routines is always -** a pointer to the [sqlite3_stmt] object returned from -** [sqlite3_prepare_v2()] or its variants. -** -** ^The second argument is the index of the SQL parameter to be set. -** ^The leftmost SQL parameter has an index of 1. ^When the same named -** SQL parameter is used more than once, second and subsequent -** occurrences have the same index as the first occurrence. -** ^The index for named parameters can be looked up using the -** [sqlite3_bind_parameter_index()] API if desired. ^The index -** for "?NNN" parameters is the value of NNN. -** ^The NNN value must be between 1 and the [sqlite3_limit()] -** parameter [SQLITE_LIMIT_VARIABLE_NUMBER] (default value: 999). -** -** ^The third argument is the value to bind to the parameter. -** ^If the third parameter to sqlite3_bind_text() or sqlite3_bind_text16() -** or sqlite3_bind_blob() is a NULL pointer then the fourth parameter -** is ignored and the end result is the same as sqlite3_bind_null(). -** -** ^(In those routines that have a fourth argument, its value is the -** number of bytes in the parameter. To be clear: the value is the -** number of <u>bytes</u> in the value, not the number of characters.)^ -** ^If the fourth parameter to sqlite3_bind_text() or sqlite3_bind_text16() -** is negative, then the length of the string is -** the number of bytes up to the first zero terminator. -** If the fourth parameter to sqlite3_bind_blob() is negative, then -** the behavior is undefined. -** If a non-negative fourth parameter is provided to sqlite3_bind_text() -** or sqlite3_bind_text16() or sqlite3_bind_text64() then -** that parameter must be the byte offset -** where the NUL terminator would occur assuming the string were NUL -** terminated. If any NUL characters occur at byte offsets less than -** the value of the fourth parameter then the resulting string value will -** contain embedded NULs. The result of expressions involving strings -** with embedded NULs is undefined. -** -** ^The fifth argument to the BLOB and string binding interfaces -** is a destructor used to dispose of the BLOB or -** string after SQLite has finished with it. ^The destructor is called -** to dispose of the BLOB or string even if the call to bind API fails. -** ^If the fifth argument is -** the special value [SQLITE_STATIC], then SQLite assumes that the -** information is in static, unmanaged space and does not need to be freed. -** ^If the fifth argument has the value [SQLITE_TRANSIENT], then -** SQLite makes its own private copy of the data immediately, before -** the sqlite3_bind_*() routine returns. -** -** ^The sixth argument to sqlite3_bind_text64() must be one of -** [SQLITE_UTF8], [SQLITE_UTF16], [SQLITE_UTF16BE], or [SQLITE_UTF16LE] -** to specify the encoding of the text in the third parameter. If -** the sixth argument to sqlite3_bind_text64() is not one of the -** allowed values shown above, or if the text encoding is different -** from the encoding specified by the sixth parameter, then the behavior -** is undefined. -** -** ^The sqlite3_bind_zeroblob() routine binds a BLOB of length N that -** is filled with zeroes. ^A zeroblob uses a fixed amount of memory -** (just an integer to hold its size) while it is being processed. -** Zeroblobs are intended to serve as placeholders for BLOBs whose -** content is later written using -** [sqlite3_blob_open | incremental BLOB I/O] routines. -** ^A negative value for the zeroblob results in a zero-length BLOB. -** -** ^If any of the sqlite3_bind_*() routines are called with a NULL pointer -** for the [prepared statement] or with a prepared statement for which -** [sqlite3_step()] has been called more recently than [sqlite3_reset()], -** then the call will return [SQLITE_MISUSE]. If any sqlite3_bind_() -** routine is passed a [prepared statement] that has been finalized, the -** result is undefined and probably harmful. -** -** ^Bindings are not cleared by the [sqlite3_reset()] routine. -** ^Unbound parameters are interpreted as NULL. -** -** ^The sqlite3_bind_* routines return [SQLITE_OK] on success or an -** [error code] if anything goes wrong. -** ^[SQLITE_TOOBIG] might be returned if the size of a string or BLOB -** exceeds limits imposed by [sqlite3_limit]([SQLITE_LIMIT_LENGTH]) or -** [SQLITE_MAX_LENGTH]. -** ^[SQLITE_RANGE] is returned if the parameter -** index is out of range. ^[SQLITE_NOMEM] is returned if malloc() fails. -** -** See also: [sqlite3_bind_parameter_count()], -** [sqlite3_bind_parameter_name()], and [sqlite3_bind_parameter_index()]. -*/ -SQLITE_API int sqlite3_bind_blob(sqlite3_stmt*, int, const void*, int n, void(*)(void*)); -SQLITE_API int sqlite3_bind_blob64(sqlite3_stmt*, int, const void*, sqlite3_uint64, - void(*)(void*)); -SQLITE_API int sqlite3_bind_double(sqlite3_stmt*, int, double); -SQLITE_API int sqlite3_bind_int(sqlite3_stmt*, int, int); -SQLITE_API int sqlite3_bind_int64(sqlite3_stmt*, int, sqlite3_int64); -SQLITE_API int sqlite3_bind_null(sqlite3_stmt*, int); -SQLITE_API int sqlite3_bind_text(sqlite3_stmt*,int,const char*,int,void(*)(void*)); -SQLITE_API int sqlite3_bind_text16(sqlite3_stmt*, int, const void*, int, void(*)(void*)); -SQLITE_API int sqlite3_bind_text64(sqlite3_stmt*, int, const char*, sqlite3_uint64, - void(*)(void*), unsigned char encoding); -SQLITE_API int sqlite3_bind_value(sqlite3_stmt*, int, const sqlite3_value*); -SQLITE_API int sqlite3_bind_zeroblob(sqlite3_stmt*, int, int n); - -/* -** CAPI3REF: Number Of SQL Parameters -** -** ^This routine can be used to find the number of [SQL parameters] -** in a [prepared statement]. SQL parameters are tokens of the -** form "?", "?NNN", ":AAA", "$AAA", or "@AAA" that serve as -** placeholders for values that are [sqlite3_bind_blob | bound] -** to the parameters at a later time. -** -** ^(This routine actually returns the index of the largest (rightmost) -** parameter. For all forms except ?NNN, this will correspond to the -** number of unique parameters. If parameters of the ?NNN form are used, -** there may be gaps in the list.)^ -** -** See also: [sqlite3_bind_blob|sqlite3_bind()], -** [sqlite3_bind_parameter_name()], and -** [sqlite3_bind_parameter_index()]. -*/ -SQLITE_API int sqlite3_bind_parameter_count(sqlite3_stmt*); - -/* -** CAPI3REF: Name Of A Host Parameter -** -** ^The sqlite3_bind_parameter_name(P,N) interface returns -** the name of the N-th [SQL parameter] in the [prepared statement] P. -** ^(SQL parameters of the form "?NNN" or ":AAA" or "@AAA" or "$AAA" -** have a name which is the string "?NNN" or ":AAA" or "@AAA" or "$AAA" -** respectively. -** In other words, the initial ":" or "$" or "@" or "?" -** is included as part of the name.)^ -** ^Parameters of the form "?" without a following integer have no name -** and are referred to as "nameless" or "anonymous parameters". -** -** ^The first host parameter has an index of 1, not 0. -** -** ^If the value N is out of range or if the N-th parameter is -** nameless, then NULL is returned. ^The returned string is -** always in UTF-8 encoding even if the named parameter was -** originally specified as UTF-16 in [sqlite3_prepare16()] or -** [sqlite3_prepare16_v2()]. -** -** See also: [sqlite3_bind_blob|sqlite3_bind()], -** [sqlite3_bind_parameter_count()], and -** [sqlite3_bind_parameter_index()]. -*/ -SQLITE_API const char *sqlite3_bind_parameter_name(sqlite3_stmt*, int); - -/* -** CAPI3REF: Index Of A Parameter With A Given Name -** -** ^Return the index of an SQL parameter given its name. ^The -** index value returned is suitable for use as the second -** parameter to [sqlite3_bind_blob|sqlite3_bind()]. ^A zero -** is returned if no matching parameter is found. ^The parameter -** name must be given in UTF-8 even if the original statement -** was prepared from UTF-16 text using [sqlite3_prepare16_v2()]. -** -** See also: [sqlite3_bind_blob|sqlite3_bind()], -** [sqlite3_bind_parameter_count()], and -** [sqlite3_bind_parameter_index()]. -*/ -SQLITE_API int sqlite3_bind_parameter_index(sqlite3_stmt*, const char *zName); - -/* -** CAPI3REF: Reset All Bindings On A Prepared Statement -** -** ^Contrary to the intuition of many, [sqlite3_reset()] does not reset -** the [sqlite3_bind_blob | bindings] on a [prepared statement]. -** ^Use this routine to reset all host parameters to NULL. -*/ -SQLITE_API int sqlite3_clear_bindings(sqlite3_stmt*); - -/* -** CAPI3REF: Number Of Columns In A Result Set -** -** ^Return the number of columns in the result set returned by the -** [prepared statement]. ^This routine returns 0 if pStmt is an SQL -** statement that does not return data (for example an [UPDATE]). -** -** See also: [sqlite3_data_count()] -*/ -SQLITE_API int sqlite3_column_count(sqlite3_stmt *pStmt); - -/* -** CAPI3REF: Column Names In A Result Set -** -** ^These routines return the name assigned to a particular column -** in the result set of a [SELECT] statement. ^The sqlite3_column_name() -** interface returns a pointer to a zero-terminated UTF-8 string -** and sqlite3_column_name16() returns a pointer to a zero-terminated -** UTF-16 string. ^The first parameter is the [prepared statement] -** that implements the [SELECT] statement. ^The second parameter is the -** column number. ^The leftmost column is number 0. -** -** ^The returned string pointer is valid until either the [prepared statement] -** is destroyed by [sqlite3_finalize()] or until the statement is automatically -** reprepared by the first call to [sqlite3_step()] for a particular run -** or until the next call to -** sqlite3_column_name() or sqlite3_column_name16() on the same column. -** -** ^If sqlite3_malloc() fails during the processing of either routine -** (for example during a conversion from UTF-8 to UTF-16) then a -** NULL pointer is returned. -** -** ^The name of a result column is the value of the "AS" clause for -** that column, if there is an AS clause. If there is no AS clause -** then the name of the column is unspecified and may change from -** one release of SQLite to the next. -*/ -SQLITE_API const char *sqlite3_column_name(sqlite3_stmt*, int N); -SQLITE_API const void *sqlite3_column_name16(sqlite3_stmt*, int N); - -/* -** CAPI3REF: Source Of Data In A Query Result -** -** ^These routines provide a means to determine the database, table, and -** table column that is the origin of a particular result column in -** [SELECT] statement. -** ^The name of the database or table or column can be returned as -** either a UTF-8 or UTF-16 string. ^The _database_ routines return -** the database name, the _table_ routines return the table name, and -** the origin_ routines return the column name. -** ^The returned string is valid until the [prepared statement] is destroyed -** using [sqlite3_finalize()] or until the statement is automatically -** reprepared by the first call to [sqlite3_step()] for a particular run -** or until the same information is requested -** again in a different encoding. -** -** ^The names returned are the original un-aliased names of the -** database, table, and column. -** -** ^The first argument to these interfaces is a [prepared statement]. -** ^These functions return information about the Nth result column returned by -** the statement, where N is the second function argument. -** ^The left-most column is column 0 for these routines. -** -** ^If the Nth column returned by the statement is an expression or -** subquery and is not a column value, then all of these functions return -** NULL. ^These routine might also return NULL if a memory allocation error -** occurs. ^Otherwise, they return the name of the attached database, table, -** or column that query result column was extracted from. -** -** ^As with all other SQLite APIs, those whose names end with "16" return -** UTF-16 encoded strings and the other functions return UTF-8. -** -** ^These APIs are only available if the library was compiled with the -** [SQLITE_ENABLE_COLUMN_METADATA] C-preprocessor symbol. -** -** If two or more threads call one or more of these routines against the same -** prepared statement and column at the same time then the results are -** undefined. -** -** If two or more threads call one or more -** [sqlite3_column_database_name | column metadata interfaces] -** for the same [prepared statement] and result column -** at the same time then the results are undefined. -*/ -SQLITE_API const char *sqlite3_column_database_name(sqlite3_stmt*,int); -SQLITE_API const void *sqlite3_column_database_name16(sqlite3_stmt*,int); -SQLITE_API const char *sqlite3_column_table_name(sqlite3_stmt*,int); -SQLITE_API const void *sqlite3_column_table_name16(sqlite3_stmt*,int); -SQLITE_API const char *sqlite3_column_origin_name(sqlite3_stmt*,int); -SQLITE_API const void *sqlite3_column_origin_name16(sqlite3_stmt*,int); - -/* -** CAPI3REF: Declared Datatype Of A Query Result -** -** ^(The first parameter is a [prepared statement]. -** If this statement is a [SELECT] statement and the Nth column of the -** returned result set of that [SELECT] is a table column (not an -** expression or subquery) then the declared type of the table -** column is returned.)^ ^If the Nth column of the result set is an -** expression or subquery, then a NULL pointer is returned. -** ^The returned string is always UTF-8 encoded. -** -** ^(For example, given the database schema: -** -** CREATE TABLE t1(c1 VARIANT); -** -** and the following statement to be compiled: -** -** SELECT c1 + 1, c1 FROM t1; -** -** this routine would return the string "VARIANT" for the second result -** column (i==1), and a NULL pointer for the first result column (i==0).)^ -** -** ^SQLite uses dynamic run-time typing. ^So just because a column -** is declared to contain a particular type does not mean that the -** data stored in that column is of the declared type. SQLite is -** strongly typed, but the typing is dynamic not static. ^Type -** is associated with individual values, not with the containers -** used to hold those values. -*/ -SQLITE_API const char *sqlite3_column_decltype(sqlite3_stmt*,int); -SQLITE_API const void *sqlite3_column_decltype16(sqlite3_stmt*,int); - -/* -** CAPI3REF: Evaluate An SQL Statement -** -** After a [prepared statement] has been prepared using either -** [sqlite3_prepare_v2()] or [sqlite3_prepare16_v2()] or one of the legacy -** interfaces [sqlite3_prepare()] or [sqlite3_prepare16()], this function -** must be called one or more times to evaluate the statement. -** -** The details of the behavior of the sqlite3_step() interface depend -** on whether the statement was prepared using the newer "v2" interface -** [sqlite3_prepare_v2()] and [sqlite3_prepare16_v2()] or the older legacy -** interface [sqlite3_prepare()] and [sqlite3_prepare16()]. The use of the -** new "v2" interface is recommended for new applications but the legacy -** interface will continue to be supported. -** -** ^In the legacy interface, the return value will be either [SQLITE_BUSY], -** [SQLITE_DONE], [SQLITE_ROW], [SQLITE_ERROR], or [SQLITE_MISUSE]. -** ^With the "v2" interface, any of the other [result codes] or -** [extended result codes] might be returned as well. -** -** ^[SQLITE_BUSY] means that the database engine was unable to acquire the -** database locks it needs to do its job. ^If the statement is a [COMMIT] -** or occurs outside of an explicit transaction, then you can retry the -** statement. If the statement is not a [COMMIT] and occurs within an -** explicit transaction then you should rollback the transaction before -** continuing. -** -** ^[SQLITE_DONE] means that the statement has finished executing -** successfully. sqlite3_step() should not be called again on this virtual -** machine without first calling [sqlite3_reset()] to reset the virtual -** machine back to its initial state. -** -** ^If the SQL statement being executed returns any data, then [SQLITE_ROW] -** is returned each time a new row of data is ready for processing by the -** caller. The values may be accessed using the [column access functions]. -** sqlite3_step() is called again to retrieve the next row of data. -** -** ^[SQLITE_ERROR] means that a run-time error (such as a constraint -** violation) has occurred. sqlite3_step() should not be called again on -** the VM. More information may be found by calling [sqlite3_errmsg()]. -** ^With the legacy interface, a more specific error code (for example, -** [SQLITE_INTERRUPT], [SQLITE_SCHEMA], [SQLITE_CORRUPT], and so forth) -** can be obtained by calling [sqlite3_reset()] on the -** [prepared statement]. ^In the "v2" interface, -** the more specific error code is returned directly by sqlite3_step(). -** -** [SQLITE_MISUSE] means that the this routine was called inappropriately. -** Perhaps it was called on a [prepared statement] that has -** already been [sqlite3_finalize | finalized] or on one that had -** previously returned [SQLITE_ERROR] or [SQLITE_DONE]. Or it could -** be the case that the same database connection is being used by two or -** more threads at the same moment in time. -** -** For all versions of SQLite up to and including 3.6.23.1, a call to -** [sqlite3_reset()] was required after sqlite3_step() returned anything -** other than [SQLITE_ROW] before any subsequent invocation of -** sqlite3_step(). Failure to reset the prepared statement using -** [sqlite3_reset()] would result in an [SQLITE_MISUSE] return from -** sqlite3_step(). But after version 3.6.23.1, sqlite3_step() began -** calling [sqlite3_reset()] automatically in this circumstance rather -** than returning [SQLITE_MISUSE]. This is not considered a compatibility -** break because any application that ever receives an SQLITE_MISUSE error -** is broken by definition. The [SQLITE_OMIT_AUTORESET] compile-time option -** can be used to restore the legacy behavior. -** -** <b>Goofy Interface Alert:</b> In the legacy interface, the sqlite3_step() -** API always returns a generic error code, [SQLITE_ERROR], following any -** error other than [SQLITE_BUSY] and [SQLITE_MISUSE]. You must call -** [sqlite3_reset()] or [sqlite3_finalize()] in order to find one of the -** specific [error codes] that better describes the error. -** We admit that this is a goofy design. The problem has been fixed -** with the "v2" interface. If you prepare all of your SQL statements -** using either [sqlite3_prepare_v2()] or [sqlite3_prepare16_v2()] instead -** of the legacy [sqlite3_prepare()] and [sqlite3_prepare16()] interfaces, -** then the more specific [error codes] are returned directly -** by sqlite3_step(). The use of the "v2" interface is recommended. -*/ -SQLITE_API int sqlite3_step(sqlite3_stmt*); - -/* -** CAPI3REF: Number of columns in a result set -** -** ^The sqlite3_data_count(P) interface returns the number of columns in the -** current row of the result set of [prepared statement] P. -** ^If prepared statement P does not have results ready to return -** (via calls to the [sqlite3_column_int | sqlite3_column_*()] of -** interfaces) then sqlite3_data_count(P) returns 0. -** ^The sqlite3_data_count(P) routine also returns 0 if P is a NULL pointer. -** ^The sqlite3_data_count(P) routine returns 0 if the previous call to -** [sqlite3_step](P) returned [SQLITE_DONE]. ^The sqlite3_data_count(P) -** will return non-zero if previous call to [sqlite3_step](P) returned -** [SQLITE_ROW], except in the case of the [PRAGMA incremental_vacuum] -** where it always returns zero since each step of that multi-step -** pragma returns 0 columns of data. -** -** See also: [sqlite3_column_count()] -*/ -SQLITE_API int sqlite3_data_count(sqlite3_stmt *pStmt); - -/* -** CAPI3REF: Fundamental Datatypes -** KEYWORDS: SQLITE_TEXT -** -** ^(Every value in SQLite has one of five fundamental datatypes: -** -** <ul> -** <li> 64-bit signed integer -** <li> 64-bit IEEE floating point number -** <li> string -** <li> BLOB -** <li> NULL -** </ul>)^ -** -** These constants are codes for each of those types. -** -** Note that the SQLITE_TEXT constant was also used in SQLite version 2 -** for a completely different meaning. Software that links against both -** SQLite version 2 and SQLite version 3 should use SQLITE3_TEXT, not -** SQLITE_TEXT. -*/ -#define SQLITE_INTEGER 1 -#define SQLITE_FLOAT 2 -#define SQLITE_BLOB 4 -#define SQLITE_NULL 5 -#ifdef SQLITE_TEXT -# undef SQLITE_TEXT -#else -# define SQLITE_TEXT 3 -#endif -#define SQLITE3_TEXT 3 - -/* -** CAPI3REF: Result Values From A Query -** KEYWORDS: {column access functions} -** -** These routines form the "result set" interface. -** -** ^These routines return information about a single column of the current -** result row of a query. ^In every case the first argument is a pointer -** to the [prepared statement] that is being evaluated (the [sqlite3_stmt*] -** that was returned from [sqlite3_prepare_v2()] or one of its variants) -** and the second argument is the index of the column for which information -** should be returned. ^The leftmost column of the result set has the index 0. -** ^The number of columns in the result can be determined using -** [sqlite3_column_count()]. -** -** If the SQL statement does not currently point to a valid row, or if the -** column index is out of range, the result is undefined. -** These routines may only be called when the most recent call to -** [sqlite3_step()] has returned [SQLITE_ROW] and neither -** [sqlite3_reset()] nor [sqlite3_finalize()] have been called subsequently. -** If any of these routines are called after [sqlite3_reset()] or -** [sqlite3_finalize()] or after [sqlite3_step()] has returned -** something other than [SQLITE_ROW], the results are undefined. -** If [sqlite3_step()] or [sqlite3_reset()] or [sqlite3_finalize()] -** are called from a different thread while any of these routines -** are pending, then the results are undefined. -** -** ^The sqlite3_column_type() routine returns the -** [SQLITE_INTEGER | datatype code] for the initial data type -** of the result column. ^The returned value is one of [SQLITE_INTEGER], -** [SQLITE_FLOAT], [SQLITE_TEXT], [SQLITE_BLOB], or [SQLITE_NULL]. The value -** returned by sqlite3_column_type() is only meaningful if no type -** conversions have occurred as described below. After a type conversion, -** the value returned by sqlite3_column_type() is undefined. Future -** versions of SQLite may change the behavior of sqlite3_column_type() -** following a type conversion. -** -** ^If the result is a BLOB or UTF-8 string then the sqlite3_column_bytes() -** routine returns the number of bytes in that BLOB or string. -** ^If the result is a UTF-16 string, then sqlite3_column_bytes() converts -** the string to UTF-8 and then returns the number of bytes. -** ^If the result is a numeric value then sqlite3_column_bytes() uses -** [sqlite3_snprintf()] to convert that value to a UTF-8 string and returns -** the number of bytes in that string. -** ^If the result is NULL, then sqlite3_column_bytes() returns zero. -** -** ^If the result is a BLOB or UTF-16 string then the sqlite3_column_bytes16() -** routine returns the number of bytes in that BLOB or string. -** ^If the result is a UTF-8 string, then sqlite3_column_bytes16() converts -** the string to UTF-16 and then returns the number of bytes. -** ^If the result is a numeric value then sqlite3_column_bytes16() uses -** [sqlite3_snprintf()] to convert that value to a UTF-16 string and returns -** the number of bytes in that string. -** ^If the result is NULL, then sqlite3_column_bytes16() returns zero. -** -** ^The values returned by [sqlite3_column_bytes()] and -** [sqlite3_column_bytes16()] do not include the zero terminators at the end -** of the string. ^For clarity: the values returned by -** [sqlite3_column_bytes()] and [sqlite3_column_bytes16()] are the number of -** bytes in the string, not the number of characters. -** -** ^Strings returned by sqlite3_column_text() and sqlite3_column_text16(), -** even empty strings, are always zero-terminated. ^The return -** value from sqlite3_column_blob() for a zero-length BLOB is a NULL pointer. -** -** ^The object returned by [sqlite3_column_value()] is an -** [unprotected sqlite3_value] object. An unprotected sqlite3_value object -** may only be used with [sqlite3_bind_value()] and [sqlite3_result_value()]. -** If the [unprotected sqlite3_value] object returned by -** [sqlite3_column_value()] is used in any other way, including calls -** to routines like [sqlite3_value_int()], [sqlite3_value_text()], -** or [sqlite3_value_bytes()], then the behavior is undefined. -** -** These routines attempt to convert the value where appropriate. ^For -** example, if the internal representation is FLOAT and a text result -** is requested, [sqlite3_snprintf()] is used internally to perform the -** conversion automatically. ^(The following table details the conversions -** that are applied: -** -** <blockquote> -** <table border="1"> -** <tr><th> Internal<br>Type <th> Requested<br>Type <th> Conversion -** -** <tr><td> NULL <td> INTEGER <td> Result is 0 -** <tr><td> NULL <td> FLOAT <td> Result is 0.0 -** <tr><td> NULL <td> TEXT <td> Result is a NULL pointer -** <tr><td> NULL <td> BLOB <td> Result is a NULL pointer -** <tr><td> INTEGER <td> FLOAT <td> Convert from integer to float -** <tr><td> INTEGER <td> TEXT <td> ASCII rendering of the integer -** <tr><td> INTEGER <td> BLOB <td> Same as INTEGER->TEXT -** <tr><td> FLOAT <td> INTEGER <td> [CAST] to INTEGER -** <tr><td> FLOAT <td> TEXT <td> ASCII rendering of the float -** <tr><td> FLOAT <td> BLOB <td> [CAST] to BLOB -** <tr><td> TEXT <td> INTEGER <td> [CAST] to INTEGER -** <tr><td> TEXT <td> FLOAT <td> [CAST] to REAL -** <tr><td> TEXT <td> BLOB <td> No change -** <tr><td> BLOB <td> INTEGER <td> [CAST] to INTEGER -** <tr><td> BLOB <td> FLOAT <td> [CAST] to REAL -** <tr><td> BLOB <td> TEXT <td> Add a zero terminator if needed -** </table> -** </blockquote>)^ -** -** The table above makes reference to standard C library functions atoi() -** and atof(). SQLite does not really use these functions. It has its -** own equivalent internal routines. The atoi() and atof() names are -** used in the table for brevity and because they are familiar to most -** C programmers. -** -** Note that when type conversions occur, pointers returned by prior -** calls to sqlite3_column_blob(), sqlite3_column_text(), and/or -** sqlite3_column_text16() may be invalidated. -** Type conversions and pointer invalidations might occur -** in the following cases: -** -** <ul> -** <li> The initial content is a BLOB and sqlite3_column_text() or -** sqlite3_column_text16() is called. A zero-terminator might -** need to be added to the string.</li> -** <li> The initial content is UTF-8 text and sqlite3_column_bytes16() or -** sqlite3_column_text16() is called. The content must be converted -** to UTF-16.</li> -** <li> The initial content is UTF-16 text and sqlite3_column_bytes() or -** sqlite3_column_text() is called. The content must be converted -** to UTF-8.</li> -** </ul> -** -** ^Conversions between UTF-16be and UTF-16le are always done in place and do -** not invalidate a prior pointer, though of course the content of the buffer -** that the prior pointer references will have been modified. Other kinds -** of conversion are done in place when it is possible, but sometimes they -** are not possible and in those cases prior pointers are invalidated. -** -** The safest and easiest to remember policy is to invoke these routines -** in one of the following ways: -** -** <ul> -** <li>sqlite3_column_text() followed by sqlite3_column_bytes()</li> -** <li>sqlite3_column_blob() followed by sqlite3_column_bytes()</li> -** <li>sqlite3_column_text16() followed by sqlite3_column_bytes16()</li> -** </ul> -** -** In other words, you should call sqlite3_column_text(), -** sqlite3_column_blob(), or sqlite3_column_text16() first to force the result -** into the desired format, then invoke sqlite3_column_bytes() or -** sqlite3_column_bytes16() to find the size of the result. Do not mix calls -** to sqlite3_column_text() or sqlite3_column_blob() with calls to -** sqlite3_column_bytes16(), and do not mix calls to sqlite3_column_text16() -** with calls to sqlite3_column_bytes(). -** -** ^The pointers returned are valid until a type conversion occurs as -** described above, or until [sqlite3_step()] or [sqlite3_reset()] or -** [sqlite3_finalize()] is called. ^The memory space used to hold strings -** and BLOBs is freed automatically. Do <b>not</b> pass the pointers returned -** from [sqlite3_column_blob()], [sqlite3_column_text()], etc. into -** [sqlite3_free()]. -** -** ^(If a memory allocation error occurs during the evaluation of any -** of these routines, a default value is returned. The default value -** is either the integer 0, the floating point number 0.0, or a NULL -** pointer. Subsequent calls to [sqlite3_errcode()] will return -** [SQLITE_NOMEM].)^ -*/ -SQLITE_API const void *sqlite3_column_blob(sqlite3_stmt*, int iCol); -SQLITE_API int sqlite3_column_bytes(sqlite3_stmt*, int iCol); -SQLITE_API int sqlite3_column_bytes16(sqlite3_stmt*, int iCol); -SQLITE_API double sqlite3_column_double(sqlite3_stmt*, int iCol); -SQLITE_API int sqlite3_column_int(sqlite3_stmt*, int iCol); -SQLITE_API sqlite3_int64 sqlite3_column_int64(sqlite3_stmt*, int iCol); -SQLITE_API const unsigned char *sqlite3_column_text(sqlite3_stmt*, int iCol); -SQLITE_API const void *sqlite3_column_text16(sqlite3_stmt*, int iCol); -SQLITE_API int sqlite3_column_type(sqlite3_stmt*, int iCol); -SQLITE_API sqlite3_value *sqlite3_column_value(sqlite3_stmt*, int iCol); - -/* -** CAPI3REF: Destroy A Prepared Statement Object -** -** ^The sqlite3_finalize() function is called to delete a [prepared statement]. -** ^If the most recent evaluation of the statement encountered no errors -** or if the statement is never been evaluated, then sqlite3_finalize() returns -** SQLITE_OK. ^If the most recent evaluation of statement S failed, then -** sqlite3_finalize(S) returns the appropriate [error code] or -** [extended error code]. -** -** ^The sqlite3_finalize(S) routine can be called at any point during -** the life cycle of [prepared statement] S: -** before statement S is ever evaluated, after -** one or more calls to [sqlite3_reset()], or after any call -** to [sqlite3_step()] regardless of whether or not the statement has -** completed execution. -** -** ^Invoking sqlite3_finalize() on a NULL pointer is a harmless no-op. -** -** The application must finalize every [prepared statement] in order to avoid -** resource leaks. It is a grievous error for the application to try to use -** a prepared statement after it has been finalized. Any use of a prepared -** statement after it has been finalized can result in undefined and -** undesirable behavior such as segfaults and heap corruption. -*/ -SQLITE_API int sqlite3_finalize(sqlite3_stmt *pStmt); - -/* -** CAPI3REF: Reset A Prepared Statement Object -** -** The sqlite3_reset() function is called to reset a [prepared statement] -** object back to its initial state, ready to be re-executed. -** ^Any SQL statement variables that had values bound to them using -** the [sqlite3_bind_blob | sqlite3_bind_*() API] retain their values. -** Use [sqlite3_clear_bindings()] to reset the bindings. -** -** ^The [sqlite3_reset(S)] interface resets the [prepared statement] S -** back to the beginning of its program. -** -** ^If the most recent call to [sqlite3_step(S)] for the -** [prepared statement] S returned [SQLITE_ROW] or [SQLITE_DONE], -** or if [sqlite3_step(S)] has never before been called on S, -** then [sqlite3_reset(S)] returns [SQLITE_OK]. -** -** ^If the most recent call to [sqlite3_step(S)] for the -** [prepared statement] S indicated an error, then -** [sqlite3_reset(S)] returns an appropriate [error code]. -** -** ^The [sqlite3_reset(S)] interface does not change the values -** of any [sqlite3_bind_blob|bindings] on the [prepared statement] S. -*/ -SQLITE_API int sqlite3_reset(sqlite3_stmt *pStmt); - -/* -** CAPI3REF: Create Or Redefine SQL Functions -** KEYWORDS: {function creation routines} -** KEYWORDS: {application-defined SQL function} -** KEYWORDS: {application-defined SQL functions} -** -** ^These functions (collectively known as "function creation routines") -** are used to add SQL functions or aggregates or to redefine the behavior -** of existing SQL functions or aggregates. The only differences between -** these routines are the text encoding expected for -** the second parameter (the name of the function being created) -** and the presence or absence of a destructor callback for -** the application data pointer. -** -** ^The first parameter is the [database connection] to which the SQL -** function is to be added. ^If an application uses more than one database -** connection then application-defined SQL functions must be added -** to each database connection separately. -** -** ^The second parameter is the name of the SQL function to be created or -** redefined. ^The length of the name is limited to 255 bytes in a UTF-8 -** representation, exclusive of the zero-terminator. ^Note that the name -** length limit is in UTF-8 bytes, not characters nor UTF-16 bytes. -** ^Any attempt to create a function with a longer name -** will result in [SQLITE_MISUSE] being returned. -** -** ^The third parameter (nArg) -** is the number of arguments that the SQL function or -** aggregate takes. ^If this parameter is -1, then the SQL function or -** aggregate may take any number of arguments between 0 and the limit -** set by [sqlite3_limit]([SQLITE_LIMIT_FUNCTION_ARG]). If the third -** parameter is less than -1 or greater than 127 then the behavior is -** undefined. -** -** ^The fourth parameter, eTextRep, specifies what -** [SQLITE_UTF8 | text encoding] this SQL function prefers for -** its parameters. The application should set this parameter to -** [SQLITE_UTF16LE] if the function implementation invokes -** [sqlite3_value_text16le()] on an input, or [SQLITE_UTF16BE] if the -** implementation invokes [sqlite3_value_text16be()] on an input, or -** [SQLITE_UTF16] if [sqlite3_value_text16()] is used, or [SQLITE_UTF8] -** otherwise. ^The same SQL function may be registered multiple times using -** different preferred text encodings, with different implementations for -** each encoding. -** ^When multiple implementations of the same function are available, SQLite -** will pick the one that involves the least amount of data conversion. -** -** ^The fourth parameter may optionally be ORed with [SQLITE_DETERMINISTIC] -** to signal that the function will always return the same result given -** the same inputs within a single SQL statement. Most SQL functions are -** deterministic. The built-in [random()] SQL function is an example of a -** function that is not deterministic. The SQLite query planner is able to -** perform additional optimizations on deterministic functions, so use -** of the [SQLITE_DETERMINISTIC] flag is recommended where possible. -** -** ^(The fifth parameter is an arbitrary pointer. The implementation of the -** function can gain access to this pointer using [sqlite3_user_data()].)^ -** -** ^The sixth, seventh and eighth parameters, xFunc, xStep and xFinal, are -** pointers to C-language functions that implement the SQL function or -** aggregate. ^A scalar SQL function requires an implementation of the xFunc -** callback only; NULL pointers must be passed as the xStep and xFinal -** parameters. ^An aggregate SQL function requires an implementation of xStep -** and xFinal and NULL pointer must be passed for xFunc. ^To delete an existing -** SQL function or aggregate, pass NULL pointers for all three function -** callbacks. -** -** ^(If the ninth parameter to sqlite3_create_function_v2() is not NULL, -** then it is destructor for the application data pointer. -** The destructor is invoked when the function is deleted, either by being -** overloaded or when the database connection closes.)^ -** ^The destructor is also invoked if the call to -** sqlite3_create_function_v2() fails. -** ^When the destructor callback of the tenth parameter is invoked, it -** is passed a single argument which is a copy of the application data -** pointer which was the fifth parameter to sqlite3_create_function_v2(). -** -** ^It is permitted to register multiple implementations of the same -** functions with the same name but with either differing numbers of -** arguments or differing preferred text encodings. ^SQLite will use -** the implementation that most closely matches the way in which the -** SQL function is used. ^A function implementation with a non-negative -** nArg parameter is a better match than a function implementation with -** a negative nArg. ^A function where the preferred text encoding -** matches the database encoding is a better -** match than a function where the encoding is different. -** ^A function where the encoding difference is between UTF16le and UTF16be -** is a closer match than a function where the encoding difference is -** between UTF8 and UTF16. -** -** ^Built-in functions may be overloaded by new application-defined functions. -** -** ^An application-defined function is permitted to call other -** SQLite interfaces. However, such calls must not -** close the database connection nor finalize or reset the prepared -** statement in which the function is running. -*/ -SQLITE_API int sqlite3_create_function( - sqlite3 *db, - const char *zFunctionName, - int nArg, - int eTextRep, - void *pApp, - void (*xFunc)(sqlite3_context*,int,sqlite3_value**), - void (*xStep)(sqlite3_context*,int,sqlite3_value**), - void (*xFinal)(sqlite3_context*) -); -SQLITE_API int sqlite3_create_function16( - sqlite3 *db, - const void *zFunctionName, - int nArg, - int eTextRep, - void *pApp, - void (*xFunc)(sqlite3_context*,int,sqlite3_value**), - void (*xStep)(sqlite3_context*,int,sqlite3_value**), - void (*xFinal)(sqlite3_context*) -); -SQLITE_API int sqlite3_create_function_v2( - sqlite3 *db, - const char *zFunctionName, - int nArg, - int eTextRep, - void *pApp, - void (*xFunc)(sqlite3_context*,int,sqlite3_value**), - void (*xStep)(sqlite3_context*,int,sqlite3_value**), - void (*xFinal)(sqlite3_context*), - void(*xDestroy)(void*) -); - -/* -** CAPI3REF: Text Encodings -** -** These constant define integer codes that represent the various -** text encodings supported by SQLite. -*/ -#define SQLITE_UTF8 1 /* IMP: R-37514-35566 */ -#define SQLITE_UTF16LE 2 /* IMP: R-03371-37637 */ -#define SQLITE_UTF16BE 3 /* IMP: R-51971-34154 */ -#define SQLITE_UTF16 4 /* Use native byte order */ -#define SQLITE_ANY 5 /* Deprecated */ -#define SQLITE_UTF16_ALIGNED 8 /* sqlite3_create_collation only */ - -/* -** CAPI3REF: Function Flags -** -** These constants may be ORed together with the -** [SQLITE_UTF8 | preferred text encoding] as the fourth argument -** to [sqlite3_create_function()], [sqlite3_create_function16()], or -** [sqlite3_create_function_v2()]. -*/ -#define SQLITE_DETERMINISTIC 0x800 - -/* -** CAPI3REF: Deprecated Functions -** DEPRECATED -** -** These functions are [deprecated]. In order to maintain -** backwards compatibility with older code, these functions continue -** to be supported. However, new applications should avoid -** the use of these functions. To help encourage people to avoid -** using these functions, we are not going to tell you what they do. -*/ -#ifndef SQLITE_OMIT_DEPRECATED -SQLITE_API SQLITE_DEPRECATED int sqlite3_aggregate_count(sqlite3_context*); -SQLITE_API SQLITE_DEPRECATED int sqlite3_expired(sqlite3_stmt*); -SQLITE_API SQLITE_DEPRECATED int sqlite3_transfer_bindings(sqlite3_stmt*, sqlite3_stmt*); -SQLITE_API SQLITE_DEPRECATED int sqlite3_global_recover(void); -SQLITE_API SQLITE_DEPRECATED void sqlite3_thread_cleanup(void); -SQLITE_API SQLITE_DEPRECATED int sqlite3_memory_alarm(void(*)(void*,sqlite3_int64,int), - void*,sqlite3_int64); -#endif - -/* -** CAPI3REF: Obtaining SQL Function Parameter Values -** -** The C-language implementation of SQL functions and aggregates uses -** this set of interface routines to access the parameter values on -** the function or aggregate. -** -** The xFunc (for scalar functions) or xStep (for aggregates) parameters -** to [sqlite3_create_function()] and [sqlite3_create_function16()] -** define callbacks that implement the SQL functions and aggregates. -** The 3rd parameter to these callbacks is an array of pointers to -** [protected sqlite3_value] objects. There is one [sqlite3_value] object for -** each parameter to the SQL function. These routines are used to -** extract values from the [sqlite3_value] objects. -** -** These routines work only with [protected sqlite3_value] objects. -** Any attempt to use these routines on an [unprotected sqlite3_value] -** object results in undefined behavior. -** -** ^These routines work just like the corresponding [column access functions] -** except that these routines take a single [protected sqlite3_value] object -** pointer instead of a [sqlite3_stmt*] pointer and an integer column number. -** -** ^The sqlite3_value_text16() interface extracts a UTF-16 string -** in the native byte-order of the host machine. ^The -** sqlite3_value_text16be() and sqlite3_value_text16le() interfaces -** extract UTF-16 strings as big-endian and little-endian respectively. -** -** ^(The sqlite3_value_numeric_type() interface attempts to apply -** numeric affinity to the value. This means that an attempt is -** made to convert the value to an integer or floating point. If -** such a conversion is possible without loss of information (in other -** words, if the value is a string that looks like a number) -** then the conversion is performed. Otherwise no conversion occurs. -** The [SQLITE_INTEGER | datatype] after conversion is returned.)^ -** -** Please pay particular attention to the fact that the pointer returned -** from [sqlite3_value_blob()], [sqlite3_value_text()], or -** [sqlite3_value_text16()] can be invalidated by a subsequent call to -** [sqlite3_value_bytes()], [sqlite3_value_bytes16()], [sqlite3_value_text()], -** or [sqlite3_value_text16()]. -** -** These routines must be called from the same thread as -** the SQL function that supplied the [sqlite3_value*] parameters. -*/ -SQLITE_API const void *sqlite3_value_blob(sqlite3_value*); -SQLITE_API int sqlite3_value_bytes(sqlite3_value*); -SQLITE_API int sqlite3_value_bytes16(sqlite3_value*); -SQLITE_API double sqlite3_value_double(sqlite3_value*); -SQLITE_API int sqlite3_value_int(sqlite3_value*); -SQLITE_API sqlite3_int64 sqlite3_value_int64(sqlite3_value*); -SQLITE_API const unsigned char *sqlite3_value_text(sqlite3_value*); -SQLITE_API const void *sqlite3_value_text16(sqlite3_value*); -SQLITE_API const void *sqlite3_value_text16le(sqlite3_value*); -SQLITE_API const void *sqlite3_value_text16be(sqlite3_value*); -SQLITE_API int sqlite3_value_type(sqlite3_value*); -SQLITE_API int sqlite3_value_numeric_type(sqlite3_value*); - -/* -** CAPI3REF: Obtain Aggregate Function Context -** -** Implementations of aggregate SQL functions use this -** routine to allocate memory for storing their state. -** -** ^The first time the sqlite3_aggregate_context(C,N) routine is called -** for a particular aggregate function, SQLite -** allocates N of memory, zeroes out that memory, and returns a pointer -** to the new memory. ^On second and subsequent calls to -** sqlite3_aggregate_context() for the same aggregate function instance, -** the same buffer is returned. Sqlite3_aggregate_context() is normally -** called once for each invocation of the xStep callback and then one -** last time when the xFinal callback is invoked. ^(When no rows match -** an aggregate query, the xStep() callback of the aggregate function -** implementation is never called and xFinal() is called exactly once. -** In those cases, sqlite3_aggregate_context() might be called for the -** first time from within xFinal().)^ -** -** ^The sqlite3_aggregate_context(C,N) routine returns a NULL pointer -** when first called if N is less than or equal to zero or if a memory -** allocate error occurs. -** -** ^(The amount of space allocated by sqlite3_aggregate_context(C,N) is -** determined by the N parameter on first successful call. Changing the -** value of N in subsequent call to sqlite3_aggregate_context() within -** the same aggregate function instance will not resize the memory -** allocation.)^ Within the xFinal callback, it is customary to set -** N=0 in calls to sqlite3_aggregate_context(C,N) so that no -** pointless memory allocations occur. -** -** ^SQLite automatically frees the memory allocated by -** sqlite3_aggregate_context() when the aggregate query concludes. -** -** The first parameter must be a copy of the -** [sqlite3_context | SQL function context] that is the first parameter -** to the xStep or xFinal callback routine that implements the aggregate -** function. -** -** This routine must be called from the same thread in which -** the aggregate SQL function is running. -*/ -SQLITE_API void *sqlite3_aggregate_context(sqlite3_context*, int nBytes); - -/* -** CAPI3REF: User Data For Functions -** -** ^The sqlite3_user_data() interface returns a copy of -** the pointer that was the pUserData parameter (the 5th parameter) -** of the [sqlite3_create_function()] -** and [sqlite3_create_function16()] routines that originally -** registered the application defined function. -** -** This routine must be called from the same thread in which -** the application-defined function is running. -*/ -SQLITE_API void *sqlite3_user_data(sqlite3_context*); - -/* -** CAPI3REF: Database Connection For Functions -** -** ^The sqlite3_context_db_handle() interface returns a copy of -** the pointer to the [database connection] (the 1st parameter) -** of the [sqlite3_create_function()] -** and [sqlite3_create_function16()] routines that originally -** registered the application defined function. -*/ -SQLITE_API sqlite3 *sqlite3_context_db_handle(sqlite3_context*); - -/* -** CAPI3REF: Function Auxiliary Data -** -** These functions may be used by (non-aggregate) SQL functions to -** associate metadata with argument values. If the same value is passed to -** multiple invocations of the same SQL function during query execution, under -** some circumstances the associated metadata may be preserved. An example -** of where this might be useful is in a regular-expression matching -** function. The compiled version of the regular expression can be stored as -** metadata associated with the pattern string. -** Then as long as the pattern string remains the same, -** the compiled regular expression can be reused on multiple -** invocations of the same function. -** -** ^The sqlite3_get_auxdata() interface returns a pointer to the metadata -** associated by the sqlite3_set_auxdata() function with the Nth argument -** value to the application-defined function. ^If there is no metadata -** associated with the function argument, this sqlite3_get_auxdata() interface -** returns a NULL pointer. -** -** ^The sqlite3_set_auxdata(C,N,P,X) interface saves P as metadata for the N-th -** argument of the application-defined function. ^Subsequent -** calls to sqlite3_get_auxdata(C,N) return P from the most recent -** sqlite3_set_auxdata(C,N,P,X) call if the metadata is still valid or -** NULL if the metadata has been discarded. -** ^After each call to sqlite3_set_auxdata(C,N,P,X) where X is not NULL, -** SQLite will invoke the destructor function X with parameter P exactly -** once, when the metadata is discarded. -** SQLite is free to discard the metadata at any time, including: <ul> -** <li> when the corresponding function parameter changes, or -** <li> when [sqlite3_reset()] or [sqlite3_finalize()] is called for the -** SQL statement, or -** <li> when sqlite3_set_auxdata() is invoked again on the same parameter, or -** <li> during the original sqlite3_set_auxdata() call when a memory -** allocation error occurs. </ul>)^ -** -** Note the last bullet in particular. The destructor X in -** sqlite3_set_auxdata(C,N,P,X) might be called immediately, before the -** sqlite3_set_auxdata() interface even returns. Hence sqlite3_set_auxdata() -** should be called near the end of the function implementation and the -** function implementation should not make any use of P after -** sqlite3_set_auxdata() has been called. -** -** ^(In practice, metadata is preserved between function calls for -** function parameters that are compile-time constants, including literal -** values and [parameters] and expressions composed from the same.)^ -** -** These routines must be called from the same thread in which -** the SQL function is running. -*/ -SQLITE_API void *sqlite3_get_auxdata(sqlite3_context*, int N); -SQLITE_API void sqlite3_set_auxdata(sqlite3_context*, int N, void*, void (*)(void*)); - - -/* -** CAPI3REF: Constants Defining Special Destructor Behavior -** -** These are special values for the destructor that is passed in as the -** final argument to routines like [sqlite3_result_blob()]. ^If the destructor -** argument is SQLITE_STATIC, it means that the content pointer is constant -** and will never change. It does not need to be destroyed. ^The -** SQLITE_TRANSIENT value means that the content will likely change in -** the near future and that SQLite should make its own private copy of -** the content before returning. -** -** The typedef is necessary to work around problems in certain -** C++ compilers. -*/ -typedef void (*sqlite3_destructor_type)(void*); -#define SQLITE_STATIC ((sqlite3_destructor_type)0) -#define SQLITE_TRANSIENT ((sqlite3_destructor_type)-1) - -/* -** CAPI3REF: Setting The Result Of An SQL Function -** -** These routines are used by the xFunc or xFinal callbacks that -** implement SQL functions and aggregates. See -** [sqlite3_create_function()] and [sqlite3_create_function16()] -** for additional information. -** -** These functions work very much like the [parameter binding] family of -** functions used to bind values to host parameters in prepared statements. -** Refer to the [SQL parameter] documentation for additional information. -** -** ^The sqlite3_result_blob() interface sets the result from -** an application-defined function to be the BLOB whose content is pointed -** to by the second parameter and which is N bytes long where N is the -** third parameter. -** -** ^The sqlite3_result_zeroblob() interfaces set the result of -** the application-defined function to be a BLOB containing all zero -** bytes and N bytes in size, where N is the value of the 2nd parameter. -** -** ^The sqlite3_result_double() interface sets the result from -** an application-defined function to be a floating point value specified -** by its 2nd argument. -** -** ^The sqlite3_result_error() and sqlite3_result_error16() functions -** cause the implemented SQL function to throw an exception. -** ^SQLite uses the string pointed to by the -** 2nd parameter of sqlite3_result_error() or sqlite3_result_error16() -** as the text of an error message. ^SQLite interprets the error -** message string from sqlite3_result_error() as UTF-8. ^SQLite -** interprets the string from sqlite3_result_error16() as UTF-16 in native -** byte order. ^If the third parameter to sqlite3_result_error() -** or sqlite3_result_error16() is negative then SQLite takes as the error -** message all text up through the first zero character. -** ^If the third parameter to sqlite3_result_error() or -** sqlite3_result_error16() is non-negative then SQLite takes that many -** bytes (not characters) from the 2nd parameter as the error message. -** ^The sqlite3_result_error() and sqlite3_result_error16() -** routines make a private copy of the error message text before -** they return. Hence, the calling function can deallocate or -** modify the text after they return without harm. -** ^The sqlite3_result_error_code() function changes the error code -** returned by SQLite as a result of an error in a function. ^By default, -** the error code is SQLITE_ERROR. ^A subsequent call to sqlite3_result_error() -** or sqlite3_result_error16() resets the error code to SQLITE_ERROR. -** -** ^The sqlite3_result_error_toobig() interface causes SQLite to throw an -** error indicating that a string or BLOB is too long to represent. -** -** ^The sqlite3_result_error_nomem() interface causes SQLite to throw an -** error indicating that a memory allocation failed. -** -** ^The sqlite3_result_int() interface sets the return value -** of the application-defined function to be the 32-bit signed integer -** value given in the 2nd argument. -** ^The sqlite3_result_int64() interface sets the return value -** of the application-defined function to be the 64-bit signed integer -** value given in the 2nd argument. -** -** ^The sqlite3_result_null() interface sets the return value -** of the application-defined function to be NULL. -** -** ^The sqlite3_result_text(), sqlite3_result_text16(), -** sqlite3_result_text16le(), and sqlite3_result_text16be() interfaces -** set the return value of the application-defined function to be -** a text string which is represented as UTF-8, UTF-16 native byte order, -** UTF-16 little endian, or UTF-16 big endian, respectively. -** ^The sqlite3_result_text64() interface sets the return value of an -** application-defined function to be a text string in an encoding -** specified by the fifth (and last) parameter, which must be one -** of [SQLITE_UTF8], [SQLITE_UTF16], [SQLITE_UTF16BE], or [SQLITE_UTF16LE]. -** ^SQLite takes the text result from the application from -** the 2nd parameter of the sqlite3_result_text* interfaces. -** ^If the 3rd parameter to the sqlite3_result_text* interfaces -** is negative, then SQLite takes result text from the 2nd parameter -** through the first zero character. -** ^If the 3rd parameter to the sqlite3_result_text* interfaces -** is non-negative, then as many bytes (not characters) of the text -** pointed to by the 2nd parameter are taken as the application-defined -** function result. If the 3rd parameter is non-negative, then it -** must be the byte offset into the string where the NUL terminator would -** appear if the string where NUL terminated. If any NUL characters occur -** in the string at a byte offset that is less than the value of the 3rd -** parameter, then the resulting string will contain embedded NULs and the -** result of expressions operating on strings with embedded NULs is undefined. -** ^If the 4th parameter to the sqlite3_result_text* interfaces -** or sqlite3_result_blob is a non-NULL pointer, then SQLite calls that -** function as the destructor on the text or BLOB result when it has -** finished using that result. -** ^If the 4th parameter to the sqlite3_result_text* interfaces or to -** sqlite3_result_blob is the special constant SQLITE_STATIC, then SQLite -** assumes that the text or BLOB result is in constant space and does not -** copy the content of the parameter nor call a destructor on the content -** when it has finished using that result. -** ^If the 4th parameter to the sqlite3_result_text* interfaces -** or sqlite3_result_blob is the special constant SQLITE_TRANSIENT -** then SQLite makes a copy of the result into space obtained from -** from [sqlite3_malloc()] before it returns. -** -** ^The sqlite3_result_value() interface sets the result of -** the application-defined function to be a copy the -** [unprotected sqlite3_value] object specified by the 2nd parameter. ^The -** sqlite3_result_value() interface makes a copy of the [sqlite3_value] -** so that the [sqlite3_value] specified in the parameter may change or -** be deallocated after sqlite3_result_value() returns without harm. -** ^A [protected sqlite3_value] object may always be used where an -** [unprotected sqlite3_value] object is required, so either -** kind of [sqlite3_value] object can be used with this interface. -** -** If these routines are called from within the different thread -** than the one containing the application-defined function that received -** the [sqlite3_context] pointer, the results are undefined. -*/ -SQLITE_API void sqlite3_result_blob(sqlite3_context*, const void*, int, void(*)(void*)); -SQLITE_API void sqlite3_result_blob64(sqlite3_context*,const void*, - sqlite3_uint64,void(*)(void*)); -SQLITE_API void sqlite3_result_double(sqlite3_context*, double); -SQLITE_API void sqlite3_result_error(sqlite3_context*, const char*, int); -SQLITE_API void sqlite3_result_error16(sqlite3_context*, const void*, int); -SQLITE_API void sqlite3_result_error_toobig(sqlite3_context*); -SQLITE_API void sqlite3_result_error_nomem(sqlite3_context*); -SQLITE_API void sqlite3_result_error_code(sqlite3_context*, int); -SQLITE_API void sqlite3_result_int(sqlite3_context*, int); -SQLITE_API void sqlite3_result_int64(sqlite3_context*, sqlite3_int64); -SQLITE_API void sqlite3_result_null(sqlite3_context*); -SQLITE_API void sqlite3_result_text(sqlite3_context*, const char*, int, void(*)(void*)); -SQLITE_API void sqlite3_result_text64(sqlite3_context*, const char*,sqlite3_uint64, - void(*)(void*), unsigned char encoding); -SQLITE_API void sqlite3_result_text16(sqlite3_context*, const void*, int, void(*)(void*)); -SQLITE_API void sqlite3_result_text16le(sqlite3_context*, const void*, int,void(*)(void*)); -SQLITE_API void sqlite3_result_text16be(sqlite3_context*, const void*, int,void(*)(void*)); -SQLITE_API void sqlite3_result_value(sqlite3_context*, sqlite3_value*); -SQLITE_API void sqlite3_result_zeroblob(sqlite3_context*, int n); - -/* -** CAPI3REF: Define New Collating Sequences -** -** ^These functions add, remove, or modify a [collation] associated -** with the [database connection] specified as the first argument. -** -** ^The name of the collation is a UTF-8 string -** for sqlite3_create_collation() and sqlite3_create_collation_v2() -** and a UTF-16 string in native byte order for sqlite3_create_collation16(). -** ^Collation names that compare equal according to [sqlite3_strnicmp()] are -** considered to be the same name. -** -** ^(The third argument (eTextRep) must be one of the constants: -** <ul> -** <li> [SQLITE_UTF8], -** <li> [SQLITE_UTF16LE], -** <li> [SQLITE_UTF16BE], -** <li> [SQLITE_UTF16], or -** <li> [SQLITE_UTF16_ALIGNED]. -** </ul>)^ -** ^The eTextRep argument determines the encoding of strings passed -** to the collating function callback, xCallback. -** ^The [SQLITE_UTF16] and [SQLITE_UTF16_ALIGNED] values for eTextRep -** force strings to be UTF16 with native byte order. -** ^The [SQLITE_UTF16_ALIGNED] value for eTextRep forces strings to begin -** on an even byte address. -** -** ^The fourth argument, pArg, is an application data pointer that is passed -** through as the first argument to the collating function callback. -** -** ^The fifth argument, xCallback, is a pointer to the collating function. -** ^Multiple collating functions can be registered using the same name but -** with different eTextRep parameters and SQLite will use whichever -** function requires the least amount of data transformation. -** ^If the xCallback argument is NULL then the collating function is -** deleted. ^When all collating functions having the same name are deleted, -** that collation is no longer usable. -** -** ^The collating function callback is invoked with a copy of the pArg -** application data pointer and with two strings in the encoding specified -** by the eTextRep argument. The collating function must return an -** integer that is negative, zero, or positive -** if the first string is less than, equal to, or greater than the second, -** respectively. A collating function must always return the same answer -** given the same inputs. If two or more collating functions are registered -** to the same collation name (using different eTextRep values) then all -** must give an equivalent answer when invoked with equivalent strings. -** The collating function must obey the following properties for all -** strings A, B, and C: -** -** <ol> -** <li> If A==B then B==A. -** <li> If A==B and B==C then A==C. -** <li> If A<B THEN B>A. -** <li> If A<B and B<C then A<C. -** </ol> -** -** If a collating function fails any of the above constraints and that -** collating function is registered and used, then the behavior of SQLite -** is undefined. -** -** ^The sqlite3_create_collation_v2() works like sqlite3_create_collation() -** with the addition that the xDestroy callback is invoked on pArg when -** the collating function is deleted. -** ^Collating functions are deleted when they are overridden by later -** calls to the collation creation functions or when the -** [database connection] is closed using [sqlite3_close()]. -** -** ^The xDestroy callback is <u>not</u> called if the -** sqlite3_create_collation_v2() function fails. Applications that invoke -** sqlite3_create_collation_v2() with a non-NULL xDestroy argument should -** check the return code and dispose of the application data pointer -** themselves rather than expecting SQLite to deal with it for them. -** This is different from every other SQLite interface. The inconsistency -** is unfortunate but cannot be changed without breaking backwards -** compatibility. -** -** See also: [sqlite3_collation_needed()] and [sqlite3_collation_needed16()]. -*/ -SQLITE_API int sqlite3_create_collation( - sqlite3*, - const char *zName, - int eTextRep, - void *pArg, - int(*xCompare)(void*,int,const void*,int,const void*) -); -SQLITE_API int sqlite3_create_collation_v2( - sqlite3*, - const char *zName, - int eTextRep, - void *pArg, - int(*xCompare)(void*,int,const void*,int,const void*), - void(*xDestroy)(void*) -); -SQLITE_API int sqlite3_create_collation16( - sqlite3*, - const void *zName, - int eTextRep, - void *pArg, - int(*xCompare)(void*,int,const void*,int,const void*) -); - -/* -** CAPI3REF: Collation Needed Callbacks -** -** ^To avoid having to register all collation sequences before a database -** can be used, a single callback function may be registered with the -** [database connection] to be invoked whenever an undefined collation -** sequence is required. -** -** ^If the function is registered using the sqlite3_collation_needed() API, -** then it is passed the names of undefined collation sequences as strings -** encoded in UTF-8. ^If sqlite3_collation_needed16() is used, -** the names are passed as UTF-16 in machine native byte order. -** ^A call to either function replaces the existing collation-needed callback. -** -** ^(When the callback is invoked, the first argument passed is a copy -** of the second argument to sqlite3_collation_needed() or -** sqlite3_collation_needed16(). The second argument is the database -** connection. The third argument is one of [SQLITE_UTF8], [SQLITE_UTF16BE], -** or [SQLITE_UTF16LE], indicating the most desirable form of the collation -** sequence function required. The fourth parameter is the name of the -** required collation sequence.)^ -** -** The callback function should register the desired collation using -** [sqlite3_create_collation()], [sqlite3_create_collation16()], or -** [sqlite3_create_collation_v2()]. -*/ -SQLITE_API int sqlite3_collation_needed( - sqlite3*, - void*, - void(*)(void*,sqlite3*,int eTextRep,const char*) -); -SQLITE_API int sqlite3_collation_needed16( - sqlite3*, - void*, - void(*)(void*,sqlite3*,int eTextRep,const void*) -); - -#ifdef SQLITE_HAS_CODEC -/* -** Specify the key for an encrypted database. This routine should be -** called right after sqlite3_open(). -** -** The code to implement this API is not available in the public release -** of SQLite. -*/ -SQLITE_API int sqlite3_key( - sqlite3 *db, /* Database to be rekeyed */ - const void *pKey, int nKey /* The key */ -); -SQLITE_API int sqlite3_key_v2( - sqlite3 *db, /* Database to be rekeyed */ - const char *zDbName, /* Name of the database */ - const void *pKey, int nKey /* The key */ -); - -/* -** Change the key on an open database. If the current database is not -** encrypted, this routine will encrypt it. If pNew==0 or nNew==0, the -** database is decrypted. -** -** The code to implement this API is not available in the public release -** of SQLite. -*/ -SQLITE_API int sqlite3_rekey( - sqlite3 *db, /* Database to be rekeyed */ - const void *pKey, int nKey /* The new key */ -); -SQLITE_API int sqlite3_rekey_v2( - sqlite3 *db, /* Database to be rekeyed */ - const char *zDbName, /* Name of the database */ - const void *pKey, int nKey /* The new key */ -); - -/* -** Specify the activation key for a SEE database. Unless -** activated, none of the SEE routines will work. -*/ -SQLITE_API void sqlite3_activate_see( - const char *zPassPhrase /* Activation phrase */ -); -#endif - -#ifdef SQLITE_ENABLE_CEROD -/* -** Specify the activation key for a CEROD database. Unless -** activated, none of the CEROD routines will work. -*/ -SQLITE_API void sqlite3_activate_cerod( - const char *zPassPhrase /* Activation phrase */ -); -#endif - -/* -** CAPI3REF: Suspend Execution For A Short Time -** -** The sqlite3_sleep() function causes the current thread to suspend execution -** for at least a number of milliseconds specified in its parameter. -** -** If the operating system does not support sleep requests with -** millisecond time resolution, then the time will be rounded up to -** the nearest second. The number of milliseconds of sleep actually -** requested from the operating system is returned. -** -** ^SQLite implements this interface by calling the xSleep() -** method of the default [sqlite3_vfs] object. If the xSleep() method -** of the default VFS is not implemented correctly, or not implemented at -** all, then the behavior of sqlite3_sleep() may deviate from the description -** in the previous paragraphs. -*/ -SQLITE_API int sqlite3_sleep(int); - -/* -** CAPI3REF: Name Of The Folder Holding Temporary Files -** -** ^(If this global variable is made to point to a string which is -** the name of a folder (a.k.a. directory), then all temporary files -** created by SQLite when using a built-in [sqlite3_vfs | VFS] -** will be placed in that directory.)^ ^If this variable -** is a NULL pointer, then SQLite performs a search for an appropriate -** temporary file directory. -** -** Applications are strongly discouraged from using this global variable. -** It is required to set a temporary folder on Windows Runtime (WinRT). -** But for all other platforms, it is highly recommended that applications -** neither read nor write this variable. This global variable is a relic -** that exists for backwards compatibility of legacy applications and should -** be avoided in new projects. -** -** It is not safe to read or modify this variable in more than one -** thread at a time. It is not safe to read or modify this variable -** if a [database connection] is being used at the same time in a separate -** thread. -** It is intended that this variable be set once -** as part of process initialization and before any SQLite interface -** routines have been called and that this variable remain unchanged -** thereafter. -** -** ^The [temp_store_directory pragma] may modify this variable and cause -** it to point to memory obtained from [sqlite3_malloc]. ^Furthermore, -** the [temp_store_directory pragma] always assumes that any string -** that this variable points to is held in memory obtained from -** [sqlite3_malloc] and the pragma may attempt to free that memory -** using [sqlite3_free]. -** Hence, if this variable is modified directly, either it should be -** made NULL or made to point to memory obtained from [sqlite3_malloc] -** or else the use of the [temp_store_directory pragma] should be avoided. -** Except when requested by the [temp_store_directory pragma], SQLite -** does not free the memory that sqlite3_temp_directory points to. If -** the application wants that memory to be freed, it must do -** so itself, taking care to only do so after all [database connection] -** objects have been destroyed. -** -** <b>Note to Windows Runtime users:</b> The temporary directory must be set -** prior to calling [sqlite3_open] or [sqlite3_open_v2]. Otherwise, various -** features that require the use of temporary files may fail. Here is an -** example of how to do this using C++ with the Windows Runtime: -** -** <blockquote><pre> -** LPCWSTR zPath = Windows::Storage::ApplicationData::Current-> -** TemporaryFolder->Path->Data(); -** char zPathBuf[MAX_PATH + 1]; -** memset(zPathBuf, 0, sizeof(zPathBuf)); -** WideCharToMultiByte(CP_UTF8, 0, zPath, -1, zPathBuf, sizeof(zPathBuf), -** NULL, NULL); -** sqlite3_temp_directory = sqlite3_mprintf("%s", zPathBuf); -** </pre></blockquote> -*/ -SQLITE_API SQLITE_EXTERN char *sqlite3_temp_directory; - -/* -** CAPI3REF: Name Of The Folder Holding Database Files -** -** ^(If this global variable is made to point to a string which is -** the name of a folder (a.k.a. directory), then all database files -** specified with a relative pathname and created or accessed by -** SQLite when using a built-in windows [sqlite3_vfs | VFS] will be assumed -** to be relative to that directory.)^ ^If this variable is a NULL -** pointer, then SQLite assumes that all database files specified -** with a relative pathname are relative to the current directory -** for the process. Only the windows VFS makes use of this global -** variable; it is ignored by the unix VFS. -** -** Changing the value of this variable while a database connection is -** open can result in a corrupt database. -** -** It is not safe to read or modify this variable in more than one -** thread at a time. It is not safe to read or modify this variable -** if a [database connection] is being used at the same time in a separate -** thread. -** It is intended that this variable be set once -** as part of process initialization and before any SQLite interface -** routines have been called and that this variable remain unchanged -** thereafter. -** -** ^The [data_store_directory pragma] may modify this variable and cause -** it to point to memory obtained from [sqlite3_malloc]. ^Furthermore, -** the [data_store_directory pragma] always assumes that any string -** that this variable points to is held in memory obtained from -** [sqlite3_malloc] and the pragma may attempt to free that memory -** using [sqlite3_free]. -** Hence, if this variable is modified directly, either it should be -** made NULL or made to point to memory obtained from [sqlite3_malloc] -** or else the use of the [data_store_directory pragma] should be avoided. -*/ -SQLITE_API SQLITE_EXTERN char *sqlite3_data_directory; - -/* -** CAPI3REF: Test For Auto-Commit Mode -** KEYWORDS: {autocommit mode} -** -** ^The sqlite3_get_autocommit() interface returns non-zero or -** zero if the given database connection is or is not in autocommit mode, -** respectively. ^Autocommit mode is on by default. -** ^Autocommit mode is disabled by a [BEGIN] statement. -** ^Autocommit mode is re-enabled by a [COMMIT] or [ROLLBACK]. -** -** If certain kinds of errors occur on a statement within a multi-statement -** transaction (errors including [SQLITE_FULL], [SQLITE_IOERR], -** [SQLITE_NOMEM], [SQLITE_BUSY], and [SQLITE_INTERRUPT]) then the -** transaction might be rolled back automatically. The only way to -** find out whether SQLite automatically rolled back the transaction after -** an error is to use this function. -** -** If another thread changes the autocommit status of the database -** connection while this routine is running, then the return value -** is undefined. -*/ -SQLITE_API int sqlite3_get_autocommit(sqlite3*); - -/* -** CAPI3REF: Find The Database Handle Of A Prepared Statement -** -** ^The sqlite3_db_handle interface returns the [database connection] handle -** to which a [prepared statement] belongs. ^The [database connection] -** returned by sqlite3_db_handle is the same [database connection] -** that was the first argument -** to the [sqlite3_prepare_v2()] call (or its variants) that was used to -** create the statement in the first place. -*/ -SQLITE_API sqlite3 *sqlite3_db_handle(sqlite3_stmt*); - -/* -** CAPI3REF: Return The Filename For A Database Connection -** -** ^The sqlite3_db_filename(D,N) interface returns a pointer to a filename -** associated with database N of connection D. ^The main database file -** has the name "main". If there is no attached database N on the database -** connection D, or if database N is a temporary or in-memory database, then -** a NULL pointer is returned. -** -** ^The filename returned by this function is the output of the -** xFullPathname method of the [VFS]. ^In other words, the filename -** will be an absolute pathname, even if the filename used -** to open the database originally was a URI or relative pathname. -*/ -SQLITE_API const char *sqlite3_db_filename(sqlite3 *db, const char *zDbName); - -/* -** CAPI3REF: Determine if a database is read-only -** -** ^The sqlite3_db_readonly(D,N) interface returns 1 if the database N -** of connection D is read-only, 0 if it is read/write, or -1 if N is not -** the name of a database on connection D. -*/ -SQLITE_API int sqlite3_db_readonly(sqlite3 *db, const char *zDbName); - -/* -** CAPI3REF: Find the next prepared statement -** -** ^This interface returns a pointer to the next [prepared statement] after -** pStmt associated with the [database connection] pDb. ^If pStmt is NULL -** then this interface returns a pointer to the first prepared statement -** associated with the database connection pDb. ^If no prepared statement -** satisfies the conditions of this routine, it returns NULL. -** -** The [database connection] pointer D in a call to -** [sqlite3_next_stmt(D,S)] must refer to an open database -** connection and in particular must not be a NULL pointer. -*/ -SQLITE_API sqlite3_stmt *sqlite3_next_stmt(sqlite3 *pDb, sqlite3_stmt *pStmt); - -/* -** CAPI3REF: Commit And Rollback Notification Callbacks -** -** ^The sqlite3_commit_hook() interface registers a callback -** function to be invoked whenever a transaction is [COMMIT | committed]. -** ^Any callback set by a previous call to sqlite3_commit_hook() -** for the same database connection is overridden. -** ^The sqlite3_rollback_hook() interface registers a callback -** function to be invoked whenever a transaction is [ROLLBACK | rolled back]. -** ^Any callback set by a previous call to sqlite3_rollback_hook() -** for the same database connection is overridden. -** ^The pArg argument is passed through to the callback. -** ^If the callback on a commit hook function returns non-zero, -** then the commit is converted into a rollback. -** -** ^The sqlite3_commit_hook(D,C,P) and sqlite3_rollback_hook(D,C,P) functions -** return the P argument from the previous call of the same function -** on the same [database connection] D, or NULL for -** the first call for each function on D. -** -** The commit and rollback hook callbacks are not reentrant. -** The callback implementation must not do anything that will modify -** the database connection that invoked the callback. Any actions -** to modify the database connection must be deferred until after the -** completion of the [sqlite3_step()] call that triggered the commit -** or rollback hook in the first place. -** Note that running any other SQL statements, including SELECT statements, -** or merely calling [sqlite3_prepare_v2()] and [sqlite3_step()] will modify -** the database connections for the meaning of "modify" in this paragraph. -** -** ^Registering a NULL function disables the callback. -** -** ^When the commit hook callback routine returns zero, the [COMMIT] -** operation is allowed to continue normally. ^If the commit hook -** returns non-zero, then the [COMMIT] is converted into a [ROLLBACK]. -** ^The rollback hook is invoked on a rollback that results from a commit -** hook returning non-zero, just as it would be with any other rollback. -** -** ^For the purposes of this API, a transaction is said to have been -** rolled back if an explicit "ROLLBACK" statement is executed, or -** an error or constraint causes an implicit rollback to occur. -** ^The rollback callback is not invoked if a transaction is -** automatically rolled back because the database connection is closed. -** -** See also the [sqlite3_update_hook()] interface. -*/ -SQLITE_API void *sqlite3_commit_hook(sqlite3*, int(*)(void*), void*); -SQLITE_API void *sqlite3_rollback_hook(sqlite3*, void(*)(void *), void*); - -/* -** CAPI3REF: Data Change Notification Callbacks -** -** ^The sqlite3_update_hook() interface registers a callback function -** with the [database connection] identified by the first argument -** to be invoked whenever a row is updated, inserted or deleted in -** a rowid table. -** ^Any callback set by a previous call to this function -** for the same database connection is overridden. -** -** ^The second argument is a pointer to the function to invoke when a -** row is updated, inserted or deleted in a rowid table. -** ^The first argument to the callback is a copy of the third argument -** to sqlite3_update_hook(). -** ^The second callback argument is one of [SQLITE_INSERT], [SQLITE_DELETE], -** or [SQLITE_UPDATE], depending on the operation that caused the callback -** to be invoked. -** ^The third and fourth arguments to the callback contain pointers to the -** database and table name containing the affected row. -** ^The final callback parameter is the [rowid] of the row. -** ^In the case of an update, this is the [rowid] after the update takes place. -** -** ^(The update hook is not invoked when internal system tables are -** modified (i.e. sqlite_master and sqlite_sequence).)^ -** ^The update hook is not invoked when [WITHOUT ROWID] tables are modified. -** -** ^In the current implementation, the update hook -** is not invoked when duplication rows are deleted because of an -** [ON CONFLICT | ON CONFLICT REPLACE] clause. ^Nor is the update hook -** invoked when rows are deleted using the [truncate optimization]. -** The exceptions defined in this paragraph might change in a future -** release of SQLite. -** -** The update hook implementation must not do anything that will modify -** the database connection that invoked the update hook. Any actions -** to modify the database connection must be deferred until after the -** completion of the [sqlite3_step()] call that triggered the update hook. -** Note that [sqlite3_prepare_v2()] and [sqlite3_step()] both modify their -** database connections for the meaning of "modify" in this paragraph. -** -** ^The sqlite3_update_hook(D,C,P) function -** returns the P argument from the previous call -** on the same [database connection] D, or NULL for -** the first call on D. -** -** See also the [sqlite3_commit_hook()] and [sqlite3_rollback_hook()] -** interfaces. -*/ -SQLITE_API void *sqlite3_update_hook( - sqlite3*, - void(*)(void *,int ,char const *,char const *,sqlite3_int64), - void* -); - -/* -** CAPI3REF: Enable Or Disable Shared Pager Cache -** -** ^(This routine enables or disables the sharing of the database cache -** and schema data structures between [database connection | connections] -** to the same database. Sharing is enabled if the argument is true -** and disabled if the argument is false.)^ -** -** ^Cache sharing is enabled and disabled for an entire process. -** This is a change as of SQLite version 3.5.0. In prior versions of SQLite, -** sharing was enabled or disabled for each thread separately. -** -** ^(The cache sharing mode set by this interface effects all subsequent -** calls to [sqlite3_open()], [sqlite3_open_v2()], and [sqlite3_open16()]. -** Existing database connections continue use the sharing mode -** that was in effect at the time they were opened.)^ -** -** ^(This routine returns [SQLITE_OK] if shared cache was enabled or disabled -** successfully. An [error code] is returned otherwise.)^ -** -** ^Shared cache is disabled by default. But this might change in -** future releases of SQLite. Applications that care about shared -** cache setting should set it explicitly. -** -** This interface is threadsafe on processors where writing a -** 32-bit integer is atomic. -** -** See Also: [SQLite Shared-Cache Mode] -*/ -SQLITE_API int sqlite3_enable_shared_cache(int); - -/* -** CAPI3REF: Attempt To Free Heap Memory -** -** ^The sqlite3_release_memory() interface attempts to free N bytes -** of heap memory by deallocating non-essential memory allocations -** held by the database library. Memory used to cache database -** pages to improve performance is an example of non-essential memory. -** ^sqlite3_release_memory() returns the number of bytes actually freed, -** which might be more or less than the amount requested. -** ^The sqlite3_release_memory() routine is a no-op returning zero -** if SQLite is not compiled with [SQLITE_ENABLE_MEMORY_MANAGEMENT]. -** -** See also: [sqlite3_db_release_memory()] -*/ -SQLITE_API int sqlite3_release_memory(int); - -/* -** CAPI3REF: Free Memory Used By A Database Connection -** -** ^The sqlite3_db_release_memory(D) interface attempts to free as much heap -** memory as possible from database connection D. Unlike the -** [sqlite3_release_memory()] interface, this interface is in effect even -** when the [SQLITE_ENABLE_MEMORY_MANAGEMENT] compile-time option is -** omitted. -** -** See also: [sqlite3_release_memory()] -*/ -SQLITE_API int sqlite3_db_release_memory(sqlite3*); - -/* -** CAPI3REF: Impose A Limit On Heap Size -** -** ^The sqlite3_soft_heap_limit64() interface sets and/or queries the -** soft limit on the amount of heap memory that may be allocated by SQLite. -** ^SQLite strives to keep heap memory utilization below the soft heap -** limit by reducing the number of pages held in the page cache -** as heap memory usages approaches the limit. -** ^The soft heap limit is "soft" because even though SQLite strives to stay -** below the limit, it will exceed the limit rather than generate -** an [SQLITE_NOMEM] error. In other words, the soft heap limit -** is advisory only. -** -** ^The return value from sqlite3_soft_heap_limit64() is the size of -** the soft heap limit prior to the call, or negative in the case of an -** error. ^If the argument N is negative -** then no change is made to the soft heap limit. Hence, the current -** size of the soft heap limit can be determined by invoking -** sqlite3_soft_heap_limit64() with a negative argument. -** -** ^If the argument N is zero then the soft heap limit is disabled. -** -** ^(The soft heap limit is not enforced in the current implementation -** if one or more of following conditions are true: -** -** <ul> -** <li> The soft heap limit is set to zero. -** <li> Memory accounting is disabled using a combination of the -** [sqlite3_config]([SQLITE_CONFIG_MEMSTATUS],...) start-time option and -** the [SQLITE_DEFAULT_MEMSTATUS] compile-time option. -** <li> An alternative page cache implementation is specified using -** [sqlite3_config]([SQLITE_CONFIG_PCACHE2],...). -** <li> The page cache allocates from its own memory pool supplied -** by [sqlite3_config]([SQLITE_CONFIG_PAGECACHE],...) rather than -** from the heap. -** </ul>)^ -** -** Beginning with SQLite version 3.7.3, the soft heap limit is enforced -** regardless of whether or not the [SQLITE_ENABLE_MEMORY_MANAGEMENT] -** compile-time option is invoked. With [SQLITE_ENABLE_MEMORY_MANAGEMENT], -** the soft heap limit is enforced on every memory allocation. Without -** [SQLITE_ENABLE_MEMORY_MANAGEMENT], the soft heap limit is only enforced -** when memory is allocated by the page cache. Testing suggests that because -** the page cache is the predominate memory user in SQLite, most -** applications will achieve adequate soft heap limit enforcement without -** the use of [SQLITE_ENABLE_MEMORY_MANAGEMENT]. -** -** The circumstances under which SQLite will enforce the soft heap limit may -** changes in future releases of SQLite. -*/ -SQLITE_API sqlite3_int64 sqlite3_soft_heap_limit64(sqlite3_int64 N); - -/* -** CAPI3REF: Deprecated Soft Heap Limit Interface -** DEPRECATED -** -** This is a deprecated version of the [sqlite3_soft_heap_limit64()] -** interface. This routine is provided for historical compatibility -** only. All new applications should use the -** [sqlite3_soft_heap_limit64()] interface rather than this one. -*/ -SQLITE_API SQLITE_DEPRECATED void sqlite3_soft_heap_limit(int N); - - -/* -** CAPI3REF: Extract Metadata About A Column Of A Table -** -** ^(The sqlite3_table_column_metadata(X,D,T,C,....) routine returns -** information about column C of table T in database D -** on [database connection] X.)^ ^The sqlite3_table_column_metadata() -** interface returns SQLITE_OK and fills in the non-NULL pointers in -** the final five arguments with appropriate values if the specified -** column exists. ^The sqlite3_table_column_metadata() interface returns -** SQLITE_ERROR and if the specified column does not exist. -** ^If the column-name parameter to sqlite3_table_column_metadata() is a -** NULL pointer, then this routine simply checks for the existance of the -** table and returns SQLITE_OK if the table exists and SQLITE_ERROR if it -** does not. -** -** ^The column is identified by the second, third and fourth parameters to -** this function. ^(The second parameter is either the name of the database -** (i.e. "main", "temp", or an attached database) containing the specified -** table or NULL.)^ ^If it is NULL, then all attached databases are searched -** for the table using the same algorithm used by the database engine to -** resolve unqualified table references. -** -** ^The third and fourth parameters to this function are the table and column -** name of the desired column, respectively. -** -** ^Metadata is returned by writing to the memory locations passed as the 5th -** and subsequent parameters to this function. ^Any of these arguments may be -** NULL, in which case the corresponding element of metadata is omitted. -** -** ^(<blockquote> -** <table border="1"> -** <tr><th> Parameter <th> Output<br>Type <th> Description -** -** <tr><td> 5th <td> const char* <td> Data type -** <tr><td> 6th <td> const char* <td> Name of default collation sequence -** <tr><td> 7th <td> int <td> True if column has a NOT NULL constraint -** <tr><td> 8th <td> int <td> True if column is part of the PRIMARY KEY -** <tr><td> 9th <td> int <td> True if column is [AUTOINCREMENT] -** </table> -** </blockquote>)^ -** -** ^The memory pointed to by the character pointers returned for the -** declaration type and collation sequence is valid until the next -** call to any SQLite API function. -** -** ^If the specified table is actually a view, an [error code] is returned. -** -** ^If the specified column is "rowid", "oid" or "_rowid_" and the table -** is not a [WITHOUT ROWID] table and an -** [INTEGER PRIMARY KEY] column has been explicitly declared, then the output -** parameters are set for the explicitly declared column. ^(If there is no -** [INTEGER PRIMARY KEY] column, then the outputs -** for the [rowid] are set as follows: -** -** <pre> -** data type: "INTEGER" -** collation sequence: "BINARY" -** not null: 0 -** primary key: 1 -** auto increment: 0 -** </pre>)^ -** -** ^This function causes all database schemas to be read from disk and -** parsed, if that has not already been done, and returns an error if -** any errors are encountered while loading the schema. -*/ -SQLITE_API int sqlite3_table_column_metadata( - sqlite3 *db, /* Connection handle */ - const char *zDbName, /* Database name or NULL */ - const char *zTableName, /* Table name */ - const char *zColumnName, /* Column name */ - char const **pzDataType, /* OUTPUT: Declared data type */ - char const **pzCollSeq, /* OUTPUT: Collation sequence name */ - int *pNotNull, /* OUTPUT: True if NOT NULL constraint exists */ - int *pPrimaryKey, /* OUTPUT: True if column part of PK */ - int *pAutoinc /* OUTPUT: True if column is auto-increment */ -); - -/* -** CAPI3REF: Load An Extension -** -** ^This interface loads an SQLite extension library from the named file. -** -** ^The sqlite3_load_extension() interface attempts to load an -** [SQLite extension] library contained in the file zFile. If -** the file cannot be loaded directly, attempts are made to load -** with various operating-system specific extensions added. -** So for example, if "samplelib" cannot be loaded, then names like -** "samplelib.so" or "samplelib.dylib" or "samplelib.dll" might -** be tried also. -** -** ^The entry point is zProc. -** ^(zProc may be 0, in which case SQLite will try to come up with an -** entry point name on its own. It first tries "sqlite3_extension_init". -** If that does not work, it constructs a name "sqlite3_X_init" where the -** X is consists of the lower-case equivalent of all ASCII alphabetic -** characters in the filename from the last "/" to the first following -** "." and omitting any initial "lib".)^ -** ^The sqlite3_load_extension() interface returns -** [SQLITE_OK] on success and [SQLITE_ERROR] if something goes wrong. -** ^If an error occurs and pzErrMsg is not 0, then the -** [sqlite3_load_extension()] interface shall attempt to -** fill *pzErrMsg with error message text stored in memory -** obtained from [sqlite3_malloc()]. The calling function -** should free this memory by calling [sqlite3_free()]. -** -** ^Extension loading must be enabled using -** [sqlite3_enable_load_extension()] prior to calling this API, -** otherwise an error will be returned. -** -** See also the [load_extension() SQL function]. -*/ -SQLITE_API int sqlite3_load_extension( - sqlite3 *db, /* Load the extension into this database connection */ - const char *zFile, /* Name of the shared library containing extension */ - const char *zProc, /* Entry point. Derived from zFile if 0 */ - char **pzErrMsg /* Put error message here if not 0 */ -); - -/* -** CAPI3REF: Enable Or Disable Extension Loading -** -** ^So as not to open security holes in older applications that are -** unprepared to deal with [extension loading], and as a means of disabling -** [extension loading] while evaluating user-entered SQL, the following API -** is provided to turn the [sqlite3_load_extension()] mechanism on and off. -** -** ^Extension loading is off by default. -** ^Call the sqlite3_enable_load_extension() routine with onoff==1 -** to turn extension loading on and call it with onoff==0 to turn -** it back off again. -*/ -SQLITE_API int sqlite3_enable_load_extension(sqlite3 *db, int onoff); - -/* -** CAPI3REF: Automatically Load Statically Linked Extensions -** -** ^This interface causes the xEntryPoint() function to be invoked for -** each new [database connection] that is created. The idea here is that -** xEntryPoint() is the entry point for a statically linked [SQLite extension] -** that is to be automatically loaded into all new database connections. -** -** ^(Even though the function prototype shows that xEntryPoint() takes -** no arguments and returns void, SQLite invokes xEntryPoint() with three -** arguments and expects and integer result as if the signature of the -** entry point where as follows: -** -** <blockquote><pre> -** int xEntryPoint( -** sqlite3 *db, -** const char **pzErrMsg, -** const struct sqlite3_api_routines *pThunk -** ); -** </pre></blockquote>)^ -** -** If the xEntryPoint routine encounters an error, it should make *pzErrMsg -** point to an appropriate error message (obtained from [sqlite3_mprintf()]) -** and return an appropriate [error code]. ^SQLite ensures that *pzErrMsg -** is NULL before calling the xEntryPoint(). ^SQLite will invoke -** [sqlite3_free()] on *pzErrMsg after xEntryPoint() returns. ^If any -** xEntryPoint() returns an error, the [sqlite3_open()], [sqlite3_open16()], -** or [sqlite3_open_v2()] call that provoked the xEntryPoint() will fail. -** -** ^Calling sqlite3_auto_extension(X) with an entry point X that is already -** on the list of automatic extensions is a harmless no-op. ^No entry point -** will be called more than once for each database connection that is opened. -** -** See also: [sqlite3_reset_auto_extension()] -** and [sqlite3_cancel_auto_extension()] -*/ -SQLITE_API int sqlite3_auto_extension(void (*xEntryPoint)(void)); - -/* -** CAPI3REF: Cancel Automatic Extension Loading -** -** ^The [sqlite3_cancel_auto_extension(X)] interface unregisters the -** initialization routine X that was registered using a prior call to -** [sqlite3_auto_extension(X)]. ^The [sqlite3_cancel_auto_extension(X)] -** routine returns 1 if initialization routine X was successfully -** unregistered and it returns 0 if X was not on the list of initialization -** routines. -*/ -SQLITE_API int sqlite3_cancel_auto_extension(void (*xEntryPoint)(void)); - -/* -** CAPI3REF: Reset Automatic Extension Loading -** -** ^This interface disables all automatic extensions previously -** registered using [sqlite3_auto_extension()]. -*/ -SQLITE_API void sqlite3_reset_auto_extension(void); - -/* -** The interface to the virtual-table mechanism is currently considered -** to be experimental. The interface might change in incompatible ways. -** If this is a problem for you, do not use the interface at this time. -** -** When the virtual-table mechanism stabilizes, we will declare the -** interface fixed, support it indefinitely, and remove this comment. -*/ - -/* -** Structures used by the virtual table interface -*/ -typedef struct sqlite3_vtab sqlite3_vtab; -typedef struct sqlite3_index_info sqlite3_index_info; -typedef struct sqlite3_vtab_cursor sqlite3_vtab_cursor; -typedef struct sqlite3_module sqlite3_module; - -/* -** CAPI3REF: Virtual Table Object -** KEYWORDS: sqlite3_module {virtual table module} -** -** This structure, sometimes called a "virtual table module", -** defines the implementation of a [virtual tables]. -** This structure consists mostly of methods for the module. -** -** ^A virtual table module is created by filling in a persistent -** instance of this structure and passing a pointer to that instance -** to [sqlite3_create_module()] or [sqlite3_create_module_v2()]. -** ^The registration remains valid until it is replaced by a different -** module or until the [database connection] closes. The content -** of this structure must not change while it is registered with -** any database connection. -*/ -struct sqlite3_module { - int iVersion; - int (*xCreate)(sqlite3*, void *pAux, - int argc, const char *const*argv, - sqlite3_vtab **ppVTab, char**); - int (*xConnect)(sqlite3*, void *pAux, - int argc, const char *const*argv, - sqlite3_vtab **ppVTab, char**); - int (*xBestIndex)(sqlite3_vtab *pVTab, sqlite3_index_info*); - int (*xDisconnect)(sqlite3_vtab *pVTab); - int (*xDestroy)(sqlite3_vtab *pVTab); - int (*xOpen)(sqlite3_vtab *pVTab, sqlite3_vtab_cursor **ppCursor); - int (*xClose)(sqlite3_vtab_cursor*); - int (*xFilter)(sqlite3_vtab_cursor*, int idxNum, const char *idxStr, - int argc, sqlite3_value **argv); - int (*xNext)(sqlite3_vtab_cursor*); - int (*xEof)(sqlite3_vtab_cursor*); - int (*xColumn)(sqlite3_vtab_cursor*, sqlite3_context*, int); - int (*xRowid)(sqlite3_vtab_cursor*, sqlite3_int64 *pRowid); - int (*xUpdate)(sqlite3_vtab *, int, sqlite3_value **, sqlite3_int64 *); - int (*xBegin)(sqlite3_vtab *pVTab); - int (*xSync)(sqlite3_vtab *pVTab); - int (*xCommit)(sqlite3_vtab *pVTab); - int (*xRollback)(sqlite3_vtab *pVTab); - int (*xFindFunction)(sqlite3_vtab *pVtab, int nArg, const char *zName, - void (**pxFunc)(sqlite3_context*,int,sqlite3_value**), - void **ppArg); - int (*xRename)(sqlite3_vtab *pVtab, const char *zNew); - /* The methods above are in version 1 of the sqlite_module object. Those - ** below are for version 2 and greater. */ - int (*xSavepoint)(sqlite3_vtab *pVTab, int); - int (*xRelease)(sqlite3_vtab *pVTab, int); - int (*xRollbackTo)(sqlite3_vtab *pVTab, int); -}; - -/* -** CAPI3REF: Virtual Table Indexing Information -** KEYWORDS: sqlite3_index_info -** -** The sqlite3_index_info structure and its substructures is used as part -** of the [virtual table] interface to -** pass information into and receive the reply from the [xBestIndex] -** method of a [virtual table module]. The fields under **Inputs** are the -** inputs to xBestIndex and are read-only. xBestIndex inserts its -** results into the **Outputs** fields. -** -** ^(The aConstraint[] array records WHERE clause constraints of the form: -** -** <blockquote>column OP expr</blockquote> -** -** where OP is =, <, <=, >, or >=.)^ ^(The particular operator is -** stored in aConstraint[].op using one of the -** [SQLITE_INDEX_CONSTRAINT_EQ | SQLITE_INDEX_CONSTRAINT_ values].)^ -** ^(The index of the column is stored in -** aConstraint[].iColumn.)^ ^(aConstraint[].usable is TRUE if the -** expr on the right-hand side can be evaluated (and thus the constraint -** is usable) and false if it cannot.)^ -** -** ^The optimizer automatically inverts terms of the form "expr OP column" -** and makes other simplifications to the WHERE clause in an attempt to -** get as many WHERE clause terms into the form shown above as possible. -** ^The aConstraint[] array only reports WHERE clause terms that are -** relevant to the particular virtual table being queried. -** -** ^Information about the ORDER BY clause is stored in aOrderBy[]. -** ^Each term of aOrderBy records a column of the ORDER BY clause. -** -** The [xBestIndex] method must fill aConstraintUsage[] with information -** about what parameters to pass to xFilter. ^If argvIndex>0 then -** the right-hand side of the corresponding aConstraint[] is evaluated -** and becomes the argvIndex-th entry in argv. ^(If aConstraintUsage[].omit -** is true, then the constraint is assumed to be fully handled by the -** virtual table and is not checked again by SQLite.)^ -** -** ^The idxNum and idxPtr values are recorded and passed into the -** [xFilter] method. -** ^[sqlite3_free()] is used to free idxPtr if and only if -** needToFreeIdxPtr is true. -** -** ^The orderByConsumed means that output from [xFilter]/[xNext] will occur in -** the correct order to satisfy the ORDER BY clause so that no separate -** sorting step is required. -** -** ^The estimatedCost value is an estimate of the cost of a particular -** strategy. A cost of N indicates that the cost of the strategy is similar -** to a linear scan of an SQLite table with N rows. A cost of log(N) -** indicates that the expense of the operation is similar to that of a -** binary search on a unique indexed field of an SQLite table with N rows. -** -** ^The estimatedRows value is an estimate of the number of rows that -** will be returned by the strategy. -** -** IMPORTANT: The estimatedRows field was added to the sqlite3_index_info -** structure for SQLite version 3.8.2. If a virtual table extension is -** used with an SQLite version earlier than 3.8.2, the results of attempting -** to read or write the estimatedRows field are undefined (but are likely -** to included crashing the application). The estimatedRows field should -** therefore only be used if [sqlite3_libversion_number()] returns a -** value greater than or equal to 3008002. -*/ -struct sqlite3_index_info { - /* Inputs */ - int nConstraint; /* Number of entries in aConstraint */ - struct sqlite3_index_constraint { - int iColumn; /* Column on left-hand side of constraint */ - unsigned char op; /* Constraint operator */ - unsigned char usable; /* True if this constraint is usable */ - int iTermOffset; /* Used internally - xBestIndex should ignore */ - } *aConstraint; /* Table of WHERE clause constraints */ - int nOrderBy; /* Number of terms in the ORDER BY clause */ - struct sqlite3_index_orderby { - int iColumn; /* Column number */ - unsigned char desc; /* True for DESC. False for ASC. */ - } *aOrderBy; /* The ORDER BY clause */ - /* Outputs */ - struct sqlite3_index_constraint_usage { - int argvIndex; /* if >0, constraint is part of argv to xFilter */ - unsigned char omit; /* Do not code a test for this constraint */ - } *aConstraintUsage; - int idxNum; /* Number used to identify the index */ - char *idxStr; /* String, possibly obtained from sqlite3_malloc */ - int needToFreeIdxStr; /* Free idxStr using sqlite3_free() if true */ - int orderByConsumed; /* True if output is already ordered */ - double estimatedCost; /* Estimated cost of using this index */ - /* Fields below are only available in SQLite 3.8.2 and later */ - sqlite3_int64 estimatedRows; /* Estimated number of rows returned */ -}; - -/* -** CAPI3REF: Virtual Table Constraint Operator Codes -** -** These macros defined the allowed values for the -** [sqlite3_index_info].aConstraint[].op field. Each value represents -** an operator that is part of a constraint term in the wHERE clause of -** a query that uses a [virtual table]. -*/ -#define SQLITE_INDEX_CONSTRAINT_EQ 2 -#define SQLITE_INDEX_CONSTRAINT_GT 4 -#define SQLITE_INDEX_CONSTRAINT_LE 8 -#define SQLITE_INDEX_CONSTRAINT_LT 16 -#define SQLITE_INDEX_CONSTRAINT_GE 32 -#define SQLITE_INDEX_CONSTRAINT_MATCH 64 - -/* -** CAPI3REF: Register A Virtual Table Implementation -** -** ^These routines are used to register a new [virtual table module] name. -** ^Module names must be registered before -** creating a new [virtual table] using the module and before using a -** preexisting [virtual table] for the module. -** -** ^The module name is registered on the [database connection] specified -** by the first parameter. ^The name of the module is given by the -** second parameter. ^The third parameter is a pointer to -** the implementation of the [virtual table module]. ^The fourth -** parameter is an arbitrary client data pointer that is passed through -** into the [xCreate] and [xConnect] methods of the virtual table module -** when a new virtual table is be being created or reinitialized. -** -** ^The sqlite3_create_module_v2() interface has a fifth parameter which -** is a pointer to a destructor for the pClientData. ^SQLite will -** invoke the destructor function (if it is not NULL) when SQLite -** no longer needs the pClientData pointer. ^The destructor will also -** be invoked if the call to sqlite3_create_module_v2() fails. -** ^The sqlite3_create_module() -** interface is equivalent to sqlite3_create_module_v2() with a NULL -** destructor. -*/ -SQLITE_API int sqlite3_create_module( - sqlite3 *db, /* SQLite connection to register module with */ - const char *zName, /* Name of the module */ - const sqlite3_module *p, /* Methods for the module */ - void *pClientData /* Client data for xCreate/xConnect */ -); -SQLITE_API int sqlite3_create_module_v2( - sqlite3 *db, /* SQLite connection to register module with */ - const char *zName, /* Name of the module */ - const sqlite3_module *p, /* Methods for the module */ - void *pClientData, /* Client data for xCreate/xConnect */ - void(*xDestroy)(void*) /* Module destructor function */ -); - -/* -** CAPI3REF: Virtual Table Instance Object -** KEYWORDS: sqlite3_vtab -** -** Every [virtual table module] implementation uses a subclass -** of this object to describe a particular instance -** of the [virtual table]. Each subclass will -** be tailored to the specific needs of the module implementation. -** The purpose of this superclass is to define certain fields that are -** common to all module implementations. -** -** ^Virtual tables methods can set an error message by assigning a -** string obtained from [sqlite3_mprintf()] to zErrMsg. The method should -** take care that any prior string is freed by a call to [sqlite3_free()] -** prior to assigning a new string to zErrMsg. ^After the error message -** is delivered up to the client application, the string will be automatically -** freed by sqlite3_free() and the zErrMsg field will be zeroed. -*/ -struct sqlite3_vtab { - const sqlite3_module *pModule; /* The module for this virtual table */ - int nRef; /* NO LONGER USED */ - char *zErrMsg; /* Error message from sqlite3_mprintf() */ - /* Virtual table implementations will typically add additional fields */ -}; - -/* -** CAPI3REF: Virtual Table Cursor Object -** KEYWORDS: sqlite3_vtab_cursor {virtual table cursor} -** -** Every [virtual table module] implementation uses a subclass of the -** following structure to describe cursors that point into the -** [virtual table] and are used -** to loop through the virtual table. Cursors are created using the -** [sqlite3_module.xOpen | xOpen] method of the module and are destroyed -** by the [sqlite3_module.xClose | xClose] method. Cursors are used -** by the [xFilter], [xNext], [xEof], [xColumn], and [xRowid] methods -** of the module. Each module implementation will define -** the content of a cursor structure to suit its own needs. -** -** This superclass exists in order to define fields of the cursor that -** are common to all implementations. -*/ -struct sqlite3_vtab_cursor { - sqlite3_vtab *pVtab; /* Virtual table of this cursor */ - /* Virtual table implementations will typically add additional fields */ -}; - -/* -** CAPI3REF: Declare The Schema Of A Virtual Table -** -** ^The [xCreate] and [xConnect] methods of a -** [virtual table module] call this interface -** to declare the format (the names and datatypes of the columns) of -** the virtual tables they implement. -*/ -SQLITE_API int sqlite3_declare_vtab(sqlite3*, const char *zSQL); - -/* -** CAPI3REF: Overload A Function For A Virtual Table -** -** ^(Virtual tables can provide alternative implementations of functions -** using the [xFindFunction] method of the [virtual table module]. -** But global versions of those functions -** must exist in order to be overloaded.)^ -** -** ^(This API makes sure a global version of a function with a particular -** name and number of parameters exists. If no such function exists -** before this API is called, a new function is created.)^ ^The implementation -** of the new function always causes an exception to be thrown. So -** the new function is not good for anything by itself. Its only -** purpose is to be a placeholder function that can be overloaded -** by a [virtual table]. -*/ -SQLITE_API int sqlite3_overload_function(sqlite3*, const char *zFuncName, int nArg); - -/* -** The interface to the virtual-table mechanism defined above (back up -** to a comment remarkably similar to this one) is currently considered -** to be experimental. The interface might change in incompatible ways. -** If this is a problem for you, do not use the interface at this time. -** -** When the virtual-table mechanism stabilizes, we will declare the -** interface fixed, support it indefinitely, and remove this comment. -*/ - -/* -** CAPI3REF: A Handle To An Open BLOB -** KEYWORDS: {BLOB handle} {BLOB handles} -** -** An instance of this object represents an open BLOB on which -** [sqlite3_blob_open | incremental BLOB I/O] can be performed. -** ^Objects of this type are created by [sqlite3_blob_open()] -** and destroyed by [sqlite3_blob_close()]. -** ^The [sqlite3_blob_read()] and [sqlite3_blob_write()] interfaces -** can be used to read or write small subsections of the BLOB. -** ^The [sqlite3_blob_bytes()] interface returns the size of the BLOB in bytes. -*/ -typedef struct sqlite3_blob sqlite3_blob; - -/* -** CAPI3REF: Open A BLOB For Incremental I/O -** -** ^(This interfaces opens a [BLOB handle | handle] to the BLOB located -** in row iRow, column zColumn, table zTable in database zDb; -** in other words, the same BLOB that would be selected by: -** -** <pre> -** SELECT zColumn FROM zDb.zTable WHERE [rowid] = iRow; -** </pre>)^ -** -** ^(Parameter zDb is not the filename that contains the database, but -** rather the symbolic name of the database. For attached databases, this is -** the name that appears after the AS keyword in the [ATTACH] statement. -** For the main database file, the database name is "main". For TEMP -** tables, the database name is "temp".)^ -** -** ^If the flags parameter is non-zero, then the BLOB is opened for read -** and write access. ^If the flags parameter is zero, the BLOB is opened for -** read-only access. -** -** ^(On success, [SQLITE_OK] is returned and the new [BLOB handle] is stored -** in *ppBlob. Otherwise an [error code] is returned and, unless the error -** code is SQLITE_MISUSE, *ppBlob is set to NULL.)^ ^This means that, provided -** the API is not misused, it is always safe to call [sqlite3_blob_close()] -** on *ppBlob after this function it returns. -** -** This function fails with SQLITE_ERROR if any of the following are true: -** <ul> -** <li> ^(Database zDb does not exist)^, -** <li> ^(Table zTable does not exist within database zDb)^, -** <li> ^(Table zTable is a WITHOUT ROWID table)^, -** <li> ^(Column zColumn does not exist)^, -** <li> ^(Row iRow is not present in the table)^, -** <li> ^(The specified column of row iRow contains a value that is not -** a TEXT or BLOB value)^, -** <li> ^(Column zColumn is part of an index, PRIMARY KEY or UNIQUE -** constraint and the blob is being opened for read/write access)^, -** <li> ^([foreign key constraints | Foreign key constraints] are enabled, -** column zColumn is part of a [child key] definition and the blob is -** being opened for read/write access)^. -** </ul> -** -** ^Unless it returns SQLITE_MISUSE, this function sets the -** [database connection] error code and message accessible via -** [sqlite3_errcode()] and [sqlite3_errmsg()] and related functions. -** -** -** ^(If the row that a BLOB handle points to is modified by an -** [UPDATE], [DELETE], or by [ON CONFLICT] side-effects -** then the BLOB handle is marked as "expired". -** This is true if any column of the row is changed, even a column -** other than the one the BLOB handle is open on.)^ -** ^Calls to [sqlite3_blob_read()] and [sqlite3_blob_write()] for -** an expired BLOB handle fail with a return code of [SQLITE_ABORT]. -** ^(Changes written into a BLOB prior to the BLOB expiring are not -** rolled back by the expiration of the BLOB. Such changes will eventually -** commit if the transaction continues to completion.)^ -** -** ^Use the [sqlite3_blob_bytes()] interface to determine the size of -** the opened blob. ^The size of a blob may not be changed by this -** interface. Use the [UPDATE] SQL command to change the size of a -** blob. -** -** ^The [sqlite3_bind_zeroblob()] and [sqlite3_result_zeroblob()] interfaces -** and the built-in [zeroblob] SQL function may be used to create a -** zero-filled blob to read or write using the incremental-blob interface. -** -** To avoid a resource leak, every open [BLOB handle] should eventually -** be released by a call to [sqlite3_blob_close()]. -*/ -SQLITE_API int sqlite3_blob_open( - sqlite3*, - const char *zDb, - const char *zTable, - const char *zColumn, - sqlite3_int64 iRow, - int flags, - sqlite3_blob **ppBlob -); - -/* -** CAPI3REF: Move a BLOB Handle to a New Row -** -** ^This function is used to move an existing blob handle so that it points -** to a different row of the same database table. ^The new row is identified -** by the rowid value passed as the second argument. Only the row can be -** changed. ^The database, table and column on which the blob handle is open -** remain the same. Moving an existing blob handle to a new row can be -** faster than closing the existing handle and opening a new one. -** -** ^(The new row must meet the same criteria as for [sqlite3_blob_open()] - -** it must exist and there must be either a blob or text value stored in -** the nominated column.)^ ^If the new row is not present in the table, or if -** it does not contain a blob or text value, or if another error occurs, an -** SQLite error code is returned and the blob handle is considered aborted. -** ^All subsequent calls to [sqlite3_blob_read()], [sqlite3_blob_write()] or -** [sqlite3_blob_reopen()] on an aborted blob handle immediately return -** SQLITE_ABORT. ^Calling [sqlite3_blob_bytes()] on an aborted blob handle -** always returns zero. -** -** ^This function sets the database handle error code and message. -*/ -SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_blob_reopen(sqlite3_blob *, sqlite3_int64); - -/* -** CAPI3REF: Close A BLOB Handle -** -** ^This function closes an open [BLOB handle]. ^(The BLOB handle is closed -** unconditionally. Even if this routine returns an error code, the -** handle is still closed.)^ -** -** ^If the blob handle being closed was opened for read-write access, and if -** the database is in auto-commit mode and there are no other open read-write -** blob handles or active write statements, the current transaction is -** committed. ^If an error occurs while committing the transaction, an error -** code is returned and the transaction rolled back. -** -** Calling this function with an argument that is not a NULL pointer or an -** open blob handle results in undefined behaviour. ^Calling this routine -** with a null pointer (such as would be returned by a failed call to -** [sqlite3_blob_open()]) is a harmless no-op. ^Otherwise, if this function -** is passed a valid open blob handle, the values returned by the -** sqlite3_errcode() and sqlite3_errmsg() functions are set before returning. -*/ -SQLITE_API int sqlite3_blob_close(sqlite3_blob *); - -/* -** CAPI3REF: Return The Size Of An Open BLOB -** -** ^Returns the size in bytes of the BLOB accessible via the -** successfully opened [BLOB handle] in its only argument. ^The -** incremental blob I/O routines can only read or overwriting existing -** blob content; they cannot change the size of a blob. -** -** This routine only works on a [BLOB handle] which has been created -** by a prior successful call to [sqlite3_blob_open()] and which has not -** been closed by [sqlite3_blob_close()]. Passing any other pointer in -** to this routine results in undefined and probably undesirable behavior. -*/ -SQLITE_API int sqlite3_blob_bytes(sqlite3_blob *); - -/* -** CAPI3REF: Read Data From A BLOB Incrementally -** -** ^(This function is used to read data from an open [BLOB handle] into a -** caller-supplied buffer. N bytes of data are copied into buffer Z -** from the open BLOB, starting at offset iOffset.)^ -** -** ^If offset iOffset is less than N bytes from the end of the BLOB, -** [SQLITE_ERROR] is returned and no data is read. ^If N or iOffset is -** less than zero, [SQLITE_ERROR] is returned and no data is read. -** ^The size of the blob (and hence the maximum value of N+iOffset) -** can be determined using the [sqlite3_blob_bytes()] interface. -** -** ^An attempt to read from an expired [BLOB handle] fails with an -** error code of [SQLITE_ABORT]. -** -** ^(On success, sqlite3_blob_read() returns SQLITE_OK. -** Otherwise, an [error code] or an [extended error code] is returned.)^ -** -** This routine only works on a [BLOB handle] which has been created -** by a prior successful call to [sqlite3_blob_open()] and which has not -** been closed by [sqlite3_blob_close()]. Passing any other pointer in -** to this routine results in undefined and probably undesirable behavior. -** -** See also: [sqlite3_blob_write()]. -*/ -SQLITE_API int sqlite3_blob_read(sqlite3_blob *, void *Z, int N, int iOffset); - -/* -** CAPI3REF: Write Data Into A BLOB Incrementally -** -** ^(This function is used to write data into an open [BLOB handle] from a -** caller-supplied buffer. N bytes of data are copied from the buffer Z -** into the open BLOB, starting at offset iOffset.)^ -** -** ^(On success, sqlite3_blob_write() returns SQLITE_OK. -** Otherwise, an [error code] or an [extended error code] is returned.)^ -** ^Unless SQLITE_MISUSE is returned, this function sets the -** [database connection] error code and message accessible via -** [sqlite3_errcode()] and [sqlite3_errmsg()] and related functions. -** -** ^If the [BLOB handle] passed as the first argument was not opened for -** writing (the flags parameter to [sqlite3_blob_open()] was zero), -** this function returns [SQLITE_READONLY]. -** -** This function may only modify the contents of the BLOB; it is -** not possible to increase the size of a BLOB using this API. -** ^If offset iOffset is less than N bytes from the end of the BLOB, -** [SQLITE_ERROR] is returned and no data is written. The size of the -** BLOB (and hence the maximum value of N+iOffset) can be determined -** using the [sqlite3_blob_bytes()] interface. ^If N or iOffset are less -** than zero [SQLITE_ERROR] is returned and no data is written. -** -** ^An attempt to write to an expired [BLOB handle] fails with an -** error code of [SQLITE_ABORT]. ^Writes to the BLOB that occurred -** before the [BLOB handle] expired are not rolled back by the -** expiration of the handle, though of course those changes might -** have been overwritten by the statement that expired the BLOB handle -** or by other independent statements. -** -** This routine only works on a [BLOB handle] which has been created -** by a prior successful call to [sqlite3_blob_open()] and which has not -** been closed by [sqlite3_blob_close()]. Passing any other pointer in -** to this routine results in undefined and probably undesirable behavior. -** -** See also: [sqlite3_blob_read()]. -*/ -SQLITE_API int sqlite3_blob_write(sqlite3_blob *, const void *z, int n, int iOffset); - -/* -** CAPI3REF: Virtual File System Objects -** -** A virtual filesystem (VFS) is an [sqlite3_vfs] object -** that SQLite uses to interact -** with the underlying operating system. Most SQLite builds come with a -** single default VFS that is appropriate for the host computer. -** New VFSes can be registered and existing VFSes can be unregistered. -** The following interfaces are provided. -** -** ^The sqlite3_vfs_find() interface returns a pointer to a VFS given its name. -** ^Names are case sensitive. -** ^Names are zero-terminated UTF-8 strings. -** ^If there is no match, a NULL pointer is returned. -** ^If zVfsName is NULL then the default VFS is returned. -** -** ^New VFSes are registered with sqlite3_vfs_register(). -** ^Each new VFS becomes the default VFS if the makeDflt flag is set. -** ^The same VFS can be registered multiple times without injury. -** ^To make an existing VFS into the default VFS, register it again -** with the makeDflt flag set. If two different VFSes with the -** same name are registered, the behavior is undefined. If a -** VFS is registered with a name that is NULL or an empty string, -** then the behavior is undefined. -** -** ^Unregister a VFS with the sqlite3_vfs_unregister() interface. -** ^(If the default VFS is unregistered, another VFS is chosen as -** the default. The choice for the new VFS is arbitrary.)^ -*/ -SQLITE_API sqlite3_vfs *sqlite3_vfs_find(const char *zVfsName); -SQLITE_API int sqlite3_vfs_register(sqlite3_vfs*, int makeDflt); -SQLITE_API int sqlite3_vfs_unregister(sqlite3_vfs*); - -/* -** CAPI3REF: Mutexes -** -** The SQLite core uses these routines for thread -** synchronization. Though they are intended for internal -** use by SQLite, code that links against SQLite is -** permitted to use any of these routines. -** -** The SQLite source code contains multiple implementations -** of these mutex routines. An appropriate implementation -** is selected automatically at compile-time. The following -** implementations are available in the SQLite core: -** -** <ul> -** <li> SQLITE_MUTEX_PTHREADS -** <li> SQLITE_MUTEX_W32 -** <li> SQLITE_MUTEX_NOOP -** </ul> -** -** The SQLITE_MUTEX_NOOP implementation is a set of routines -** that does no real locking and is appropriate for use in -** a single-threaded application. The SQLITE_MUTEX_PTHREADS and -** SQLITE_MUTEX_W32 implementations are appropriate for use on Unix -** and Windows. -** -** If SQLite is compiled with the SQLITE_MUTEX_APPDEF preprocessor -** macro defined (with "-DSQLITE_MUTEX_APPDEF=1"), then no mutex -** implementation is included with the library. In this case the -** application must supply a custom mutex implementation using the -** [SQLITE_CONFIG_MUTEX] option of the sqlite3_config() function -** before calling sqlite3_initialize() or any other public sqlite3_ -** function that calls sqlite3_initialize(). -** -** ^The sqlite3_mutex_alloc() routine allocates a new -** mutex and returns a pointer to it. ^The sqlite3_mutex_alloc() -** routine returns NULL if it is unable to allocate the requested -** mutex. The argument to sqlite3_mutex_alloc() must one of these -** integer constants: -** -** <ul> -** <li> SQLITE_MUTEX_FAST -** <li> SQLITE_MUTEX_RECURSIVE -** <li> SQLITE_MUTEX_STATIC_MASTER -** <li> SQLITE_MUTEX_STATIC_MEM -** <li> SQLITE_MUTEX_STATIC_OPEN -** <li> SQLITE_MUTEX_STATIC_PRNG -** <li> SQLITE_MUTEX_STATIC_LRU -** <li> SQLITE_MUTEX_STATIC_PMEM -** <li> SQLITE_MUTEX_STATIC_APP1 -** <li> SQLITE_MUTEX_STATIC_APP2 -** <li> SQLITE_MUTEX_STATIC_APP3 -** </ul> -** -** ^The first two constants (SQLITE_MUTEX_FAST and SQLITE_MUTEX_RECURSIVE) -** cause sqlite3_mutex_alloc() to create -** a new mutex. ^The new mutex is recursive when SQLITE_MUTEX_RECURSIVE -** is used but not necessarily so when SQLITE_MUTEX_FAST is used. -** The mutex implementation does not need to make a distinction -** between SQLITE_MUTEX_RECURSIVE and SQLITE_MUTEX_FAST if it does -** not want to. SQLite will only request a recursive mutex in -** cases where it really needs one. If a faster non-recursive mutex -** implementation is available on the host platform, the mutex subsystem -** might return such a mutex in response to SQLITE_MUTEX_FAST. -** -** ^The other allowed parameters to sqlite3_mutex_alloc() (anything other -** than SQLITE_MUTEX_FAST and SQLITE_MUTEX_RECURSIVE) each return -** a pointer to a static preexisting mutex. ^Nine static mutexes are -** used by the current version of SQLite. Future versions of SQLite -** may add additional static mutexes. Static mutexes are for internal -** use by SQLite only. Applications that use SQLite mutexes should -** use only the dynamic mutexes returned by SQLITE_MUTEX_FAST or -** SQLITE_MUTEX_RECURSIVE. -** -** ^Note that if one of the dynamic mutex parameters (SQLITE_MUTEX_FAST -** or SQLITE_MUTEX_RECURSIVE) is used then sqlite3_mutex_alloc() -** returns a different mutex on every call. ^For the static -** mutex types, the same mutex is returned on every call that has -** the same type number. -** -** ^The sqlite3_mutex_free() routine deallocates a previously -** allocated dynamic mutex. Attempting to deallocate a static -** mutex results in undefined behavior. -** -** ^The sqlite3_mutex_enter() and sqlite3_mutex_try() routines attempt -** to enter a mutex. ^If another thread is already within the mutex, -** sqlite3_mutex_enter() will block and sqlite3_mutex_try() will return -** SQLITE_BUSY. ^The sqlite3_mutex_try() interface returns [SQLITE_OK] -** upon successful entry. ^(Mutexes created using -** SQLITE_MUTEX_RECURSIVE can be entered multiple times by the same thread. -** In such cases, the -** mutex must be exited an equal number of times before another thread -** can enter.)^ If the same thread tries to enter any mutex other -** than an SQLITE_MUTEX_RECURSIVE more than once, the behavior is undefined. -** -** ^(Some systems (for example, Windows 95) do not support the operation -** implemented by sqlite3_mutex_try(). On those systems, sqlite3_mutex_try() -** will always return SQLITE_BUSY. The SQLite core only ever uses -** sqlite3_mutex_try() as an optimization so this is acceptable -** behavior.)^ -** -** ^The sqlite3_mutex_leave() routine exits a mutex that was -** previously entered by the same thread. The behavior -** is undefined if the mutex is not currently entered by the -** calling thread or is not currently allocated. -** -** ^If the argument to sqlite3_mutex_enter(), sqlite3_mutex_try(), or -** sqlite3_mutex_leave() is a NULL pointer, then all three routines -** behave as no-ops. -** -** See also: [sqlite3_mutex_held()] and [sqlite3_mutex_notheld()]. -*/ -SQLITE_API sqlite3_mutex *sqlite3_mutex_alloc(int); -SQLITE_API void sqlite3_mutex_free(sqlite3_mutex*); -SQLITE_API void sqlite3_mutex_enter(sqlite3_mutex*); -SQLITE_API int sqlite3_mutex_try(sqlite3_mutex*); -SQLITE_API void sqlite3_mutex_leave(sqlite3_mutex*); - -/* -** CAPI3REF: Mutex Methods Object -** -** An instance of this structure defines the low-level routines -** used to allocate and use mutexes. -** -** Usually, the default mutex implementations provided by SQLite are -** sufficient, however the application has the option of substituting a custom -** implementation for specialized deployments or systems for which SQLite -** does not provide a suitable implementation. In this case, the application -** creates and populates an instance of this structure to pass -** to sqlite3_config() along with the [SQLITE_CONFIG_MUTEX] option. -** Additionally, an instance of this structure can be used as an -** output variable when querying the system for the current mutex -** implementation, using the [SQLITE_CONFIG_GETMUTEX] option. -** -** ^The xMutexInit method defined by this structure is invoked as -** part of system initialization by the sqlite3_initialize() function. -** ^The xMutexInit routine is called by SQLite exactly once for each -** effective call to [sqlite3_initialize()]. -** -** ^The xMutexEnd method defined by this structure is invoked as -** part of system shutdown by the sqlite3_shutdown() function. The -** implementation of this method is expected to release all outstanding -** resources obtained by the mutex methods implementation, especially -** those obtained by the xMutexInit method. ^The xMutexEnd() -** interface is invoked exactly once for each call to [sqlite3_shutdown()]. -** -** ^(The remaining seven methods defined by this structure (xMutexAlloc, -** xMutexFree, xMutexEnter, xMutexTry, xMutexLeave, xMutexHeld and -** xMutexNotheld) implement the following interfaces (respectively): -** -** <ul> -** <li> [sqlite3_mutex_alloc()] </li> -** <li> [sqlite3_mutex_free()] </li> -** <li> [sqlite3_mutex_enter()] </li> -** <li> [sqlite3_mutex_try()] </li> -** <li> [sqlite3_mutex_leave()] </li> -** <li> [sqlite3_mutex_held()] </li> -** <li> [sqlite3_mutex_notheld()] </li> -** </ul>)^ -** -** The only difference is that the public sqlite3_XXX functions enumerated -** above silently ignore any invocations that pass a NULL pointer instead -** of a valid mutex handle. The implementations of the methods defined -** by this structure are not required to handle this case, the results -** of passing a NULL pointer instead of a valid mutex handle are undefined -** (i.e. it is acceptable to provide an implementation that segfaults if -** it is passed a NULL pointer). -** -** The xMutexInit() method must be threadsafe. It must be harmless to -** invoke xMutexInit() multiple times within the same process and without -** intervening calls to xMutexEnd(). Second and subsequent calls to -** xMutexInit() must be no-ops. -** -** xMutexInit() must not use SQLite memory allocation ([sqlite3_malloc()] -** and its associates). Similarly, xMutexAlloc() must not use SQLite memory -** allocation for a static mutex. ^However xMutexAlloc() may use SQLite -** memory allocation for a fast or recursive mutex. -** -** ^SQLite will invoke the xMutexEnd() method when [sqlite3_shutdown()] is -** called, but only if the prior call to xMutexInit returned SQLITE_OK. -** If xMutexInit fails in any way, it is expected to clean up after itself -** prior to returning. -*/ -typedef struct sqlite3_mutex_methods sqlite3_mutex_methods; -struct sqlite3_mutex_methods { - int (*xMutexInit)(void); - int (*xMutexEnd)(void); - sqlite3_mutex *(*xMutexAlloc)(int); - void (*xMutexFree)(sqlite3_mutex *); - void (*xMutexEnter)(sqlite3_mutex *); - int (*xMutexTry)(sqlite3_mutex *); - void (*xMutexLeave)(sqlite3_mutex *); - int (*xMutexHeld)(sqlite3_mutex *); - int (*xMutexNotheld)(sqlite3_mutex *); -}; - -/* -** CAPI3REF: Mutex Verification Routines -** -** The sqlite3_mutex_held() and sqlite3_mutex_notheld() routines -** are intended for use inside assert() statements. The SQLite core -** never uses these routines except inside an assert() and applications -** are advised to follow the lead of the core. The SQLite core only -** provides implementations for these routines when it is compiled -** with the SQLITE_DEBUG flag. External mutex implementations -** are only required to provide these routines if SQLITE_DEBUG is -** defined and if NDEBUG is not defined. -** -** These routines should return true if the mutex in their argument -** is held or not held, respectively, by the calling thread. -** -** The implementation is not required to provide versions of these -** routines that actually work. If the implementation does not provide working -** versions of these routines, it should at least provide stubs that always -** return true so that one does not get spurious assertion failures. -** -** If the argument to sqlite3_mutex_held() is a NULL pointer then -** the routine should return 1. This seems counter-intuitive since -** clearly the mutex cannot be held if it does not exist. But -** the reason the mutex does not exist is because the build is not -** using mutexes. And we do not want the assert() containing the -** call to sqlite3_mutex_held() to fail, so a non-zero return is -** the appropriate thing to do. The sqlite3_mutex_notheld() -** interface should also return 1 when given a NULL pointer. -*/ -#ifndef NDEBUG -SQLITE_API int sqlite3_mutex_held(sqlite3_mutex*); -SQLITE_API int sqlite3_mutex_notheld(sqlite3_mutex*); -#endif - -/* -** CAPI3REF: Mutex Types -** -** The [sqlite3_mutex_alloc()] interface takes a single argument -** which is one of these integer constants. -** -** The set of static mutexes may change from one SQLite release to the -** next. Applications that override the built-in mutex logic must be -** prepared to accommodate additional static mutexes. -*/ -#define SQLITE_MUTEX_FAST 0 -#define SQLITE_MUTEX_RECURSIVE 1 -#define SQLITE_MUTEX_STATIC_MASTER 2 -#define SQLITE_MUTEX_STATIC_MEM 3 /* sqlite3_malloc() */ -#define SQLITE_MUTEX_STATIC_MEM2 4 /* NOT USED */ -#define SQLITE_MUTEX_STATIC_OPEN 4 /* sqlite3BtreeOpen() */ -#define SQLITE_MUTEX_STATIC_PRNG 5 /* sqlite3_random() */ -#define SQLITE_MUTEX_STATIC_LRU 6 /* lru page list */ -#define SQLITE_MUTEX_STATIC_LRU2 7 /* NOT USED */ -#define SQLITE_MUTEX_STATIC_PMEM 7 /* sqlite3PageMalloc() */ -#define SQLITE_MUTEX_STATIC_APP1 8 /* For use by application */ -#define SQLITE_MUTEX_STATIC_APP2 9 /* For use by application */ -#define SQLITE_MUTEX_STATIC_APP3 10 /* For use by application */ - -/* -** CAPI3REF: Retrieve the mutex for a database connection -** -** ^This interface returns a pointer the [sqlite3_mutex] object that -** serializes access to the [database connection] given in the argument -** when the [threading mode] is Serialized. -** ^If the [threading mode] is Single-thread or Multi-thread then this -** routine returns a NULL pointer. -*/ -SQLITE_API sqlite3_mutex *sqlite3_db_mutex(sqlite3*); - -/* -** CAPI3REF: Low-Level Control Of Database Files -** -** ^The [sqlite3_file_control()] interface makes a direct call to the -** xFileControl method for the [sqlite3_io_methods] object associated -** with a particular database identified by the second argument. ^The -** name of the database is "main" for the main database or "temp" for the -** TEMP database, or the name that appears after the AS keyword for -** databases that are added using the [ATTACH] SQL command. -** ^A NULL pointer can be used in place of "main" to refer to the -** main database file. -** ^The third and fourth parameters to this routine -** are passed directly through to the second and third parameters of -** the xFileControl method. ^The return value of the xFileControl -** method becomes the return value of this routine. -** -** ^The SQLITE_FCNTL_FILE_POINTER value for the op parameter causes -** a pointer to the underlying [sqlite3_file] object to be written into -** the space pointed to by the 4th parameter. ^The SQLITE_FCNTL_FILE_POINTER -** case is a short-circuit path which does not actually invoke the -** underlying sqlite3_io_methods.xFileControl method. -** -** ^If the second parameter (zDbName) does not match the name of any -** open database file, then SQLITE_ERROR is returned. ^This error -** code is not remembered and will not be recalled by [sqlite3_errcode()] -** or [sqlite3_errmsg()]. The underlying xFileControl method might -** also return SQLITE_ERROR. There is no way to distinguish between -** an incorrect zDbName and an SQLITE_ERROR return from the underlying -** xFileControl method. -** -** See also: [SQLITE_FCNTL_LOCKSTATE] -*/ -SQLITE_API int sqlite3_file_control(sqlite3*, const char *zDbName, int op, void*); - -/* -** CAPI3REF: Testing Interface -** -** ^The sqlite3_test_control() interface is used to read out internal -** state of SQLite and to inject faults into SQLite for testing -** purposes. ^The first parameter is an operation code that determines -** the number, meaning, and operation of all subsequent parameters. -** -** This interface is not for use by applications. It exists solely -** for verifying the correct operation of the SQLite library. Depending -** on how the SQLite library is compiled, this interface might not exist. -** -** The details of the operation codes, their meanings, the parameters -** they take, and what they do are all subject to change without notice. -** Unlike most of the SQLite API, this function is not guaranteed to -** operate consistently from one release to the next. -*/ -SQLITE_API int sqlite3_test_control(int op, ...); - -/* -** CAPI3REF: Testing Interface Operation Codes -** -** These constants are the valid operation code parameters used -** as the first argument to [sqlite3_test_control()]. -** -** These parameters and their meanings are subject to change -** without notice. These values are for testing purposes only. -** Applications should not use any of these parameters or the -** [sqlite3_test_control()] interface. -*/ -#define SQLITE_TESTCTRL_FIRST 5 -#define SQLITE_TESTCTRL_PRNG_SAVE 5 -#define SQLITE_TESTCTRL_PRNG_RESTORE 6 -#define SQLITE_TESTCTRL_PRNG_RESET 7 -#define SQLITE_TESTCTRL_BITVEC_TEST 8 -#define SQLITE_TESTCTRL_FAULT_INSTALL 9 -#define SQLITE_TESTCTRL_BENIGN_MALLOC_HOOKS 10 -#define SQLITE_TESTCTRL_PENDING_BYTE 11 -#define SQLITE_TESTCTRL_ASSERT 12 -#define SQLITE_TESTCTRL_ALWAYS 13 -#define SQLITE_TESTCTRL_RESERVE 14 -#define SQLITE_TESTCTRL_OPTIMIZATIONS 15 -#define SQLITE_TESTCTRL_ISKEYWORD 16 -#define SQLITE_TESTCTRL_SCRATCHMALLOC 17 -#define SQLITE_TESTCTRL_LOCALTIME_FAULT 18 -#define SQLITE_TESTCTRL_EXPLAIN_STMT 19 /* NOT USED */ -#define SQLITE_TESTCTRL_NEVER_CORRUPT 20 -#define SQLITE_TESTCTRL_VDBE_COVERAGE 21 -#define SQLITE_TESTCTRL_BYTEORDER 22 -#define SQLITE_TESTCTRL_ISINIT 23 -#define SQLITE_TESTCTRL_SORTER_MMAP 24 -#define SQLITE_TESTCTRL_LAST 24 - -/* -** CAPI3REF: SQLite Runtime Status -** -** ^This interface is used to retrieve runtime status information -** about the performance of SQLite, and optionally to reset various -** highwater marks. ^The first argument is an integer code for -** the specific parameter to measure. ^(Recognized integer codes -** are of the form [status parameters | SQLITE_STATUS_...].)^ -** ^The current value of the parameter is returned into *pCurrent. -** ^The highest recorded value is returned in *pHighwater. ^If the -** resetFlag is true, then the highest record value is reset after -** *pHighwater is written. ^(Some parameters do not record the highest -** value. For those parameters -** nothing is written into *pHighwater and the resetFlag is ignored.)^ -** ^(Other parameters record only the highwater mark and not the current -** value. For these latter parameters nothing is written into *pCurrent.)^ -** -** ^The sqlite3_status() routine returns SQLITE_OK on success and a -** non-zero [error code] on failure. -** -** This routine is threadsafe but is not atomic. This routine can be -** called while other threads are running the same or different SQLite -** interfaces. However the values returned in *pCurrent and -** *pHighwater reflect the status of SQLite at different points in time -** and it is possible that another thread might change the parameter -** in between the times when *pCurrent and *pHighwater are written. -** -** See also: [sqlite3_db_status()] -*/ -SQLITE_API int sqlite3_status(int op, int *pCurrent, int *pHighwater, int resetFlag); - - -/* -** CAPI3REF: Status Parameters -** KEYWORDS: {status parameters} -** -** These integer constants designate various run-time status parameters -** that can be returned by [sqlite3_status()]. -** -** <dl> -** [[SQLITE_STATUS_MEMORY_USED]] ^(<dt>SQLITE_STATUS_MEMORY_USED</dt> -** <dd>This parameter is the current amount of memory checked out -** using [sqlite3_malloc()], either directly or indirectly. The -** figure includes calls made to [sqlite3_malloc()] by the application -** and internal memory usage by the SQLite library. Scratch memory -** controlled by [SQLITE_CONFIG_SCRATCH] and auxiliary page-cache -** memory controlled by [SQLITE_CONFIG_PAGECACHE] is not included in -** this parameter. The amount returned is the sum of the allocation -** sizes as reported by the xSize method in [sqlite3_mem_methods].</dd>)^ -** -** [[SQLITE_STATUS_MALLOC_SIZE]] ^(<dt>SQLITE_STATUS_MALLOC_SIZE</dt> -** <dd>This parameter records the largest memory allocation request -** handed to [sqlite3_malloc()] or [sqlite3_realloc()] (or their -** internal equivalents). Only the value returned in the -** *pHighwater parameter to [sqlite3_status()] is of interest. -** The value written into the *pCurrent parameter is undefined.</dd>)^ -** -** [[SQLITE_STATUS_MALLOC_COUNT]] ^(<dt>SQLITE_STATUS_MALLOC_COUNT</dt> -** <dd>This parameter records the number of separate memory allocations -** currently checked out.</dd>)^ -** -** [[SQLITE_STATUS_PAGECACHE_USED]] ^(<dt>SQLITE_STATUS_PAGECACHE_USED</dt> -** <dd>This parameter returns the number of pages used out of the -** [pagecache memory allocator] that was configured using -** [SQLITE_CONFIG_PAGECACHE]. The -** value returned is in pages, not in bytes.</dd>)^ -** -** [[SQLITE_STATUS_PAGECACHE_OVERFLOW]] -** ^(<dt>SQLITE_STATUS_PAGECACHE_OVERFLOW</dt> -** <dd>This parameter returns the number of bytes of page cache -** allocation which could not be satisfied by the [SQLITE_CONFIG_PAGECACHE] -** buffer and where forced to overflow to [sqlite3_malloc()]. The -** returned value includes allocations that overflowed because they -** where too large (they were larger than the "sz" parameter to -** [SQLITE_CONFIG_PAGECACHE]) and allocations that overflowed because -** no space was left in the page cache.</dd>)^ -** -** [[SQLITE_STATUS_PAGECACHE_SIZE]] ^(<dt>SQLITE_STATUS_PAGECACHE_SIZE</dt> -** <dd>This parameter records the largest memory allocation request -** handed to [pagecache memory allocator]. Only the value returned in the -** *pHighwater parameter to [sqlite3_status()] is of interest. -** The value written into the *pCurrent parameter is undefined.</dd>)^ -** -** [[SQLITE_STATUS_SCRATCH_USED]] ^(<dt>SQLITE_STATUS_SCRATCH_USED</dt> -** <dd>This parameter returns the number of allocations used out of the -** [scratch memory allocator] configured using -** [SQLITE_CONFIG_SCRATCH]. The value returned is in allocations, not -** in bytes. Since a single thread may only have one scratch allocation -** outstanding at time, this parameter also reports the number of threads -** using scratch memory at the same time.</dd>)^ -** -** [[SQLITE_STATUS_SCRATCH_OVERFLOW]] ^(<dt>SQLITE_STATUS_SCRATCH_OVERFLOW</dt> -** <dd>This parameter returns the number of bytes of scratch memory -** allocation which could not be satisfied by the [SQLITE_CONFIG_SCRATCH] -** buffer and where forced to overflow to [sqlite3_malloc()]. The values -** returned include overflows because the requested allocation was too -** larger (that is, because the requested allocation was larger than the -** "sz" parameter to [SQLITE_CONFIG_SCRATCH]) and because no scratch buffer -** slots were available. -** </dd>)^ -** -** [[SQLITE_STATUS_SCRATCH_SIZE]] ^(<dt>SQLITE_STATUS_SCRATCH_SIZE</dt> -** <dd>This parameter records the largest memory allocation request -** handed to [scratch memory allocator]. Only the value returned in the -** *pHighwater parameter to [sqlite3_status()] is of interest. -** The value written into the *pCurrent parameter is undefined.</dd>)^ -** -** [[SQLITE_STATUS_PARSER_STACK]] ^(<dt>SQLITE_STATUS_PARSER_STACK</dt> -** <dd>This parameter records the deepest parser stack. It is only -** meaningful if SQLite is compiled with [YYTRACKMAXSTACKDEPTH].</dd>)^ -** </dl> -** -** New status parameters may be added from time to time. -*/ -#define SQLITE_STATUS_MEMORY_USED 0 -#define SQLITE_STATUS_PAGECACHE_USED 1 -#define SQLITE_STATUS_PAGECACHE_OVERFLOW 2 -#define SQLITE_STATUS_SCRATCH_USED 3 -#define SQLITE_STATUS_SCRATCH_OVERFLOW 4 -#define SQLITE_STATUS_MALLOC_SIZE 5 -#define SQLITE_STATUS_PARSER_STACK 6 -#define SQLITE_STATUS_PAGECACHE_SIZE 7 -#define SQLITE_STATUS_SCRATCH_SIZE 8 -#define SQLITE_STATUS_MALLOC_COUNT 9 - -/* -** CAPI3REF: Database Connection Status -** -** ^This interface is used to retrieve runtime status information -** about a single [database connection]. ^The first argument is the -** database connection object to be interrogated. ^The second argument -** is an integer constant, taken from the set of -** [SQLITE_DBSTATUS options], that -** determines the parameter to interrogate. The set of -** [SQLITE_DBSTATUS options] is likely -** to grow in future releases of SQLite. -** -** ^The current value of the requested parameter is written into *pCur -** and the highest instantaneous value is written into *pHiwtr. ^If -** the resetFlg is true, then the highest instantaneous value is -** reset back down to the current value. -** -** ^The sqlite3_db_status() routine returns SQLITE_OK on success and a -** non-zero [error code] on failure. -** -** See also: [sqlite3_status()] and [sqlite3_stmt_status()]. -*/ -SQLITE_API int sqlite3_db_status(sqlite3*, int op, int *pCur, int *pHiwtr, int resetFlg); - -/* -** CAPI3REF: Status Parameters for database connections -** KEYWORDS: {SQLITE_DBSTATUS options} -** -** These constants are the available integer "verbs" that can be passed as -** the second argument to the [sqlite3_db_status()] interface. -** -** New verbs may be added in future releases of SQLite. Existing verbs -** might be discontinued. Applications should check the return code from -** [sqlite3_db_status()] to make sure that the call worked. -** The [sqlite3_db_status()] interface will return a non-zero error code -** if a discontinued or unsupported verb is invoked. -** -** <dl> -** [[SQLITE_DBSTATUS_LOOKASIDE_USED]] ^(<dt>SQLITE_DBSTATUS_LOOKASIDE_USED</dt> -** <dd>This parameter returns the number of lookaside memory slots currently -** checked out.</dd>)^ -** -** [[SQLITE_DBSTATUS_LOOKASIDE_HIT]] ^(<dt>SQLITE_DBSTATUS_LOOKASIDE_HIT</dt> -** <dd>This parameter returns the number malloc attempts that were -** satisfied using lookaside memory. Only the high-water value is meaningful; -** the current value is always zero.)^ -** -** [[SQLITE_DBSTATUS_LOOKASIDE_MISS_SIZE]] -** ^(<dt>SQLITE_DBSTATUS_LOOKASIDE_MISS_SIZE</dt> -** <dd>This parameter returns the number malloc attempts that might have -** been satisfied using lookaside memory but failed due to the amount of -** memory requested being larger than the lookaside slot size. -** Only the high-water value is meaningful; -** the current value is always zero.)^ -** -** [[SQLITE_DBSTATUS_LOOKASIDE_MISS_FULL]] -** ^(<dt>SQLITE_DBSTATUS_LOOKASIDE_MISS_FULL</dt> -** <dd>This parameter returns the number malloc attempts that might have -** been satisfied using lookaside memory but failed due to all lookaside -** memory already being in use. -** Only the high-water value is meaningful; -** the current value is always zero.)^ -** -** [[SQLITE_DBSTATUS_CACHE_USED]] ^(<dt>SQLITE_DBSTATUS_CACHE_USED</dt> -** <dd>This parameter returns the approximate number of bytes of heap -** memory used by all pager caches associated with the database connection.)^ -** ^The highwater mark associated with SQLITE_DBSTATUS_CACHE_USED is always 0. -** -** [[SQLITE_DBSTATUS_SCHEMA_USED]] ^(<dt>SQLITE_DBSTATUS_SCHEMA_USED</dt> -** <dd>This parameter returns the approximate number of bytes of heap -** memory used to store the schema for all databases associated -** with the connection - main, temp, and any [ATTACH]-ed databases.)^ -** ^The full amount of memory used by the schemas is reported, even if the -** schema memory is shared with other database connections due to -** [shared cache mode] being enabled. -** ^The highwater mark associated with SQLITE_DBSTATUS_SCHEMA_USED is always 0. -** -** [[SQLITE_DBSTATUS_STMT_USED]] ^(<dt>SQLITE_DBSTATUS_STMT_USED</dt> -** <dd>This parameter returns the approximate number of bytes of heap -** and lookaside memory used by all prepared statements associated with -** the database connection.)^ -** ^The highwater mark associated with SQLITE_DBSTATUS_STMT_USED is always 0. -** </dd> -** -** [[SQLITE_DBSTATUS_CACHE_HIT]] ^(<dt>SQLITE_DBSTATUS_CACHE_HIT</dt> -** <dd>This parameter returns the number of pager cache hits that have -** occurred.)^ ^The highwater mark associated with SQLITE_DBSTATUS_CACHE_HIT -** is always 0. -** </dd> -** -** [[SQLITE_DBSTATUS_CACHE_MISS]] ^(<dt>SQLITE_DBSTATUS_CACHE_MISS</dt> -** <dd>This parameter returns the number of pager cache misses that have -** occurred.)^ ^The highwater mark associated with SQLITE_DBSTATUS_CACHE_MISS -** is always 0. -** </dd> -** -** [[SQLITE_DBSTATUS_CACHE_WRITE]] ^(<dt>SQLITE_DBSTATUS_CACHE_WRITE</dt> -** <dd>This parameter returns the number of dirty cache entries that have -** been written to disk. Specifically, the number of pages written to the -** wal file in wal mode databases, or the number of pages written to the -** database file in rollback mode databases. Any pages written as part of -** transaction rollback or database recovery operations are not included. -** If an IO or other error occurs while writing a page to disk, the effect -** on subsequent SQLITE_DBSTATUS_CACHE_WRITE requests is undefined.)^ ^The -** highwater mark associated with SQLITE_DBSTATUS_CACHE_WRITE is always 0. -** </dd> -** -** [[SQLITE_DBSTATUS_DEFERRED_FKS]] ^(<dt>SQLITE_DBSTATUS_DEFERRED_FKS</dt> -** <dd>This parameter returns zero for the current value if and only if -** all foreign key constraints (deferred or immediate) have been -** resolved.)^ ^The highwater mark is always 0. -** </dd> -** </dl> -*/ -#define SQLITE_DBSTATUS_LOOKASIDE_USED 0 -#define SQLITE_DBSTATUS_CACHE_USED 1 -#define SQLITE_DBSTATUS_SCHEMA_USED 2 -#define SQLITE_DBSTATUS_STMT_USED 3 -#define SQLITE_DBSTATUS_LOOKASIDE_HIT 4 -#define SQLITE_DBSTATUS_LOOKASIDE_MISS_SIZE 5 -#define SQLITE_DBSTATUS_LOOKASIDE_MISS_FULL 6 -#define SQLITE_DBSTATUS_CACHE_HIT 7 -#define SQLITE_DBSTATUS_CACHE_MISS 8 -#define SQLITE_DBSTATUS_CACHE_WRITE 9 -#define SQLITE_DBSTATUS_DEFERRED_FKS 10 -#define SQLITE_DBSTATUS_MAX 10 /* Largest defined DBSTATUS */ - - -/* -** CAPI3REF: Prepared Statement Status -** -** ^(Each prepared statement maintains various -** [SQLITE_STMTSTATUS counters] that measure the number -** of times it has performed specific operations.)^ These counters can -** be used to monitor the performance characteristics of the prepared -** statements. For example, if the number of table steps greatly exceeds -** the number of table searches or result rows, that would tend to indicate -** that the prepared statement is using a full table scan rather than -** an index. -** -** ^(This interface is used to retrieve and reset counter values from -** a [prepared statement]. The first argument is the prepared statement -** object to be interrogated. The second argument -** is an integer code for a specific [SQLITE_STMTSTATUS counter] -** to be interrogated.)^ -** ^The current value of the requested counter is returned. -** ^If the resetFlg is true, then the counter is reset to zero after this -** interface call returns. -** -** See also: [sqlite3_status()] and [sqlite3_db_status()]. -*/ -SQLITE_API int sqlite3_stmt_status(sqlite3_stmt*, int op,int resetFlg); - -/* -** CAPI3REF: Status Parameters for prepared statements -** KEYWORDS: {SQLITE_STMTSTATUS counter} {SQLITE_STMTSTATUS counters} -** -** These preprocessor macros define integer codes that name counter -** values associated with the [sqlite3_stmt_status()] interface. -** The meanings of the various counters are as follows: -** -** <dl> -** [[SQLITE_STMTSTATUS_FULLSCAN_STEP]] <dt>SQLITE_STMTSTATUS_FULLSCAN_STEP</dt> -** <dd>^This is the number of times that SQLite has stepped forward in -** a table as part of a full table scan. Large numbers for this counter -** may indicate opportunities for performance improvement through -** careful use of indices.</dd> -** -** [[SQLITE_STMTSTATUS_SORT]] <dt>SQLITE_STMTSTATUS_SORT</dt> -** <dd>^This is the number of sort operations that have occurred. -** A non-zero value in this counter may indicate an opportunity to -** improvement performance through careful use of indices.</dd> -** -** [[SQLITE_STMTSTATUS_AUTOINDEX]] <dt>SQLITE_STMTSTATUS_AUTOINDEX</dt> -** <dd>^This is the number of rows inserted into transient indices that -** were created automatically in order to help joins run faster. -** A non-zero value in this counter may indicate an opportunity to -** improvement performance by adding permanent indices that do not -** need to be reinitialized each time the statement is run.</dd> -** -** [[SQLITE_STMTSTATUS_VM_STEP]] <dt>SQLITE_STMTSTATUS_VM_STEP</dt> -** <dd>^This is the number of virtual machine operations executed -** by the prepared statement if that number is less than or equal -** to 2147483647. The number of virtual machine operations can be -** used as a proxy for the total work done by the prepared statement. -** If the number of virtual machine operations exceeds 2147483647 -** then the value returned by this statement status code is undefined. -** </dd> -** </dl> -*/ -#define SQLITE_STMTSTATUS_FULLSCAN_STEP 1 -#define SQLITE_STMTSTATUS_SORT 2 -#define SQLITE_STMTSTATUS_AUTOINDEX 3 -#define SQLITE_STMTSTATUS_VM_STEP 4 - -/* -** CAPI3REF: Custom Page Cache Object -** -** The sqlite3_pcache type is opaque. It is implemented by -** the pluggable module. The SQLite core has no knowledge of -** its size or internal structure and never deals with the -** sqlite3_pcache object except by holding and passing pointers -** to the object. -** -** See [sqlite3_pcache_methods2] for additional information. -*/ -typedef struct sqlite3_pcache sqlite3_pcache; - -/* -** CAPI3REF: Custom Page Cache Object -** -** The sqlite3_pcache_page object represents a single page in the -** page cache. The page cache will allocate instances of this -** object. Various methods of the page cache use pointers to instances -** of this object as parameters or as their return value. -** -** See [sqlite3_pcache_methods2] for additional information. -*/ -typedef struct sqlite3_pcache_page sqlite3_pcache_page; -struct sqlite3_pcache_page { - void *pBuf; /* The content of the page */ - void *pExtra; /* Extra information associated with the page */ -}; - -/* -** CAPI3REF: Application Defined Page Cache. -** KEYWORDS: {page cache} -** -** ^(The [sqlite3_config]([SQLITE_CONFIG_PCACHE2], ...) interface can -** register an alternative page cache implementation by passing in an -** instance of the sqlite3_pcache_methods2 structure.)^ -** In many applications, most of the heap memory allocated by -** SQLite is used for the page cache. -** By implementing a -** custom page cache using this API, an application can better control -** the amount of memory consumed by SQLite, the way in which -** that memory is allocated and released, and the policies used to -** determine exactly which parts of a database file are cached and for -** how long. -** -** The alternative page cache mechanism is an -** extreme measure that is only needed by the most demanding applications. -** The built-in page cache is recommended for most uses. -** -** ^(The contents of the sqlite3_pcache_methods2 structure are copied to an -** internal buffer by SQLite within the call to [sqlite3_config]. Hence -** the application may discard the parameter after the call to -** [sqlite3_config()] returns.)^ -** -** [[the xInit() page cache method]] -** ^(The xInit() method is called once for each effective -** call to [sqlite3_initialize()])^ -** (usually only once during the lifetime of the process). ^(The xInit() -** method is passed a copy of the sqlite3_pcache_methods2.pArg value.)^ -** The intent of the xInit() method is to set up global data structures -** required by the custom page cache implementation. -** ^(If the xInit() method is NULL, then the -** built-in default page cache is used instead of the application defined -** page cache.)^ -** -** [[the xShutdown() page cache method]] -** ^The xShutdown() method is called by [sqlite3_shutdown()]. -** It can be used to clean up -** any outstanding resources before process shutdown, if required. -** ^The xShutdown() method may be NULL. -** -** ^SQLite automatically serializes calls to the xInit method, -** so the xInit method need not be threadsafe. ^The -** xShutdown method is only called from [sqlite3_shutdown()] so it does -** not need to be threadsafe either. All other methods must be threadsafe -** in multithreaded applications. -** -** ^SQLite will never invoke xInit() more than once without an intervening -** call to xShutdown(). -** -** [[the xCreate() page cache methods]] -** ^SQLite invokes the xCreate() method to construct a new cache instance. -** SQLite will typically create one cache instance for each open database file, -** though this is not guaranteed. ^The -** first parameter, szPage, is the size in bytes of the pages that must -** be allocated by the cache. ^szPage will always a power of two. ^The -** second parameter szExtra is a number of bytes of extra storage -** associated with each page cache entry. ^The szExtra parameter will -** a number less than 250. SQLite will use the -** extra szExtra bytes on each page to store metadata about the underlying -** database page on disk. The value passed into szExtra depends -** on the SQLite version, the target platform, and how SQLite was compiled. -** ^The third argument to xCreate(), bPurgeable, is true if the cache being -** created will be used to cache database pages of a file stored on disk, or -** false if it is used for an in-memory database. The cache implementation -** does not have to do anything special based with the value of bPurgeable; -** it is purely advisory. ^On a cache where bPurgeable is false, SQLite will -** never invoke xUnpin() except to deliberately delete a page. -** ^In other words, calls to xUnpin() on a cache with bPurgeable set to -** false will always have the "discard" flag set to true. -** ^Hence, a cache created with bPurgeable false will -** never contain any unpinned pages. -** -** [[the xCachesize() page cache method]] -** ^(The xCachesize() method may be called at any time by SQLite to set the -** suggested maximum cache-size (number of pages stored by) the cache -** instance passed as the first argument. This is the value configured using -** the SQLite "[PRAGMA cache_size]" command.)^ As with the bPurgeable -** parameter, the implementation is not required to do anything with this -** value; it is advisory only. -** -** [[the xPagecount() page cache methods]] -** The xPagecount() method must return the number of pages currently -** stored in the cache, both pinned and unpinned. -** -** [[the xFetch() page cache methods]] -** The xFetch() method locates a page in the cache and returns a pointer to -** an sqlite3_pcache_page object associated with that page, or a NULL pointer. -** The pBuf element of the returned sqlite3_pcache_page object will be a -** pointer to a buffer of szPage bytes used to store the content of a -** single database page. The pExtra element of sqlite3_pcache_page will be -** a pointer to the szExtra bytes of extra storage that SQLite has requested -** for each entry in the page cache. -** -** The page to be fetched is determined by the key. ^The minimum key value -** is 1. After it has been retrieved using xFetch, the page is considered -** to be "pinned". -** -** If the requested page is already in the page cache, then the page cache -** implementation must return a pointer to the page buffer with its content -** intact. If the requested page is not already in the cache, then the -** cache implementation should use the value of the createFlag -** parameter to help it determined what action to take: -** -** <table border=1 width=85% align=center> -** <tr><th> createFlag <th> Behavior when page is not already in cache -** <tr><td> 0 <td> Do not allocate a new page. Return NULL. -** <tr><td> 1 <td> Allocate a new page if it easy and convenient to do so. -** Otherwise return NULL. -** <tr><td> 2 <td> Make every effort to allocate a new page. Only return -** NULL if allocating a new page is effectively impossible. -** </table> -** -** ^(SQLite will normally invoke xFetch() with a createFlag of 0 or 1. SQLite -** will only use a createFlag of 2 after a prior call with a createFlag of 1 -** failed.)^ In between the to xFetch() calls, SQLite may -** attempt to unpin one or more cache pages by spilling the content of -** pinned pages to disk and synching the operating system disk cache. -** -** [[the xUnpin() page cache method]] -** ^xUnpin() is called by SQLite with a pointer to a currently pinned page -** as its second argument. If the third parameter, discard, is non-zero, -** then the page must be evicted from the cache. -** ^If the discard parameter is -** zero, then the page may be discarded or retained at the discretion of -** page cache implementation. ^The page cache implementation -** may choose to evict unpinned pages at any time. -** -** The cache must not perform any reference counting. A single -** call to xUnpin() unpins the page regardless of the number of prior calls -** to xFetch(). -** -** [[the xRekey() page cache methods]] -** The xRekey() method is used to change the key value associated with the -** page passed as the second argument. If the cache -** previously contains an entry associated with newKey, it must be -** discarded. ^Any prior cache entry associated with newKey is guaranteed not -** to be pinned. -** -** When SQLite calls the xTruncate() method, the cache must discard all -** existing cache entries with page numbers (keys) greater than or equal -** to the value of the iLimit parameter passed to xTruncate(). If any -** of these pages are pinned, they are implicitly unpinned, meaning that -** they can be safely discarded. -** -** [[the xDestroy() page cache method]] -** ^The xDestroy() method is used to delete a cache allocated by xCreate(). -** All resources associated with the specified cache should be freed. ^After -** calling the xDestroy() method, SQLite considers the [sqlite3_pcache*] -** handle invalid, and will not use it with any other sqlite3_pcache_methods2 -** functions. -** -** [[the xShrink() page cache method]] -** ^SQLite invokes the xShrink() method when it wants the page cache to -** free up as much of heap memory as possible. The page cache implementation -** is not obligated to free any memory, but well-behaved implementations should -** do their best. -*/ -typedef struct sqlite3_pcache_methods2 sqlite3_pcache_methods2; -struct sqlite3_pcache_methods2 { - int iVersion; - void *pArg; - int (*xInit)(void*); - void (*xShutdown)(void*); - sqlite3_pcache *(*xCreate)(int szPage, int szExtra, int bPurgeable); - void (*xCachesize)(sqlite3_pcache*, int nCachesize); - int (*xPagecount)(sqlite3_pcache*); - sqlite3_pcache_page *(*xFetch)(sqlite3_pcache*, unsigned key, int createFlag); - void (*xUnpin)(sqlite3_pcache*, sqlite3_pcache_page*, int discard); - void (*xRekey)(sqlite3_pcache*, sqlite3_pcache_page*, - unsigned oldKey, unsigned newKey); - void (*xTruncate)(sqlite3_pcache*, unsigned iLimit); - void (*xDestroy)(sqlite3_pcache*); - void (*xShrink)(sqlite3_pcache*); -}; - -/* -** This is the obsolete pcache_methods object that has now been replaced -** by sqlite3_pcache_methods2. This object is not used by SQLite. It is -** retained in the header file for backwards compatibility only. -*/ -typedef struct sqlite3_pcache_methods sqlite3_pcache_methods; -struct sqlite3_pcache_methods { - void *pArg; - int (*xInit)(void*); - void (*xShutdown)(void*); - sqlite3_pcache *(*xCreate)(int szPage, int bPurgeable); - void (*xCachesize)(sqlite3_pcache*, int nCachesize); - int (*xPagecount)(sqlite3_pcache*); - void *(*xFetch)(sqlite3_pcache*, unsigned key, int createFlag); - void (*xUnpin)(sqlite3_pcache*, void*, int discard); - void (*xRekey)(sqlite3_pcache*, void*, unsigned oldKey, unsigned newKey); - void (*xTruncate)(sqlite3_pcache*, unsigned iLimit); - void (*xDestroy)(sqlite3_pcache*); -}; - - -/* -** CAPI3REF: Online Backup Object -** -** The sqlite3_backup object records state information about an ongoing -** online backup operation. ^The sqlite3_backup object is created by -** a call to [sqlite3_backup_init()] and is destroyed by a call to -** [sqlite3_backup_finish()]. -** -** See Also: [Using the SQLite Online Backup API] -*/ -typedef struct sqlite3_backup sqlite3_backup; - -/* -** CAPI3REF: Online Backup API. -** -** The backup API copies the content of one database into another. -** It is useful either for creating backups of databases or -** for copying in-memory databases to or from persistent files. -** -** See Also: [Using the SQLite Online Backup API] -** -** ^SQLite holds a write transaction open on the destination database file -** for the duration of the backup operation. -** ^The source database is read-locked only while it is being read; -** it is not locked continuously for the entire backup operation. -** ^Thus, the backup may be performed on a live source database without -** preventing other database connections from -** reading or writing to the source database while the backup is underway. -** -** ^(To perform a backup operation: -** <ol> -** <li><b>sqlite3_backup_init()</b> is called once to initialize the -** backup, -** <li><b>sqlite3_backup_step()</b> is called one or more times to transfer -** the data between the two databases, and finally -** <li><b>sqlite3_backup_finish()</b> is called to release all resources -** associated with the backup operation. -** </ol>)^ -** There should be exactly one call to sqlite3_backup_finish() for each -** successful call to sqlite3_backup_init(). -** -** [[sqlite3_backup_init()]] <b>sqlite3_backup_init()</b> -** -** ^The D and N arguments to sqlite3_backup_init(D,N,S,M) are the -** [database connection] associated with the destination database -** and the database name, respectively. -** ^The database name is "main" for the main database, "temp" for the -** temporary database, or the name specified after the AS keyword in -** an [ATTACH] statement for an attached database. -** ^The S and M arguments passed to -** sqlite3_backup_init(D,N,S,M) identify the [database connection] -** and database name of the source database, respectively. -** ^The source and destination [database connections] (parameters S and D) -** must be different or else sqlite3_backup_init(D,N,S,M) will fail with -** an error. -** -** ^A call to sqlite3_backup_init() will fail, returning SQLITE_ERROR, if -** there is already a read or read-write transaction open on the -** destination database. -** -** ^If an error occurs within sqlite3_backup_init(D,N,S,M), then NULL is -** returned and an error code and error message are stored in the -** destination [database connection] D. -** ^The error code and message for the failed call to sqlite3_backup_init() -** can be retrieved using the [sqlite3_errcode()], [sqlite3_errmsg()], and/or -** [sqlite3_errmsg16()] functions. -** ^A successful call to sqlite3_backup_init() returns a pointer to an -** [sqlite3_backup] object. -** ^The [sqlite3_backup] object may be used with the sqlite3_backup_step() and -** sqlite3_backup_finish() functions to perform the specified backup -** operation. -** -** [[sqlite3_backup_step()]] <b>sqlite3_backup_step()</b> -** -** ^Function sqlite3_backup_step(B,N) will copy up to N pages between -** the source and destination databases specified by [sqlite3_backup] object B. -** ^If N is negative, all remaining source pages are copied. -** ^If sqlite3_backup_step(B,N) successfully copies N pages and there -** are still more pages to be copied, then the function returns [SQLITE_OK]. -** ^If sqlite3_backup_step(B,N) successfully finishes copying all pages -** from source to destination, then it returns [SQLITE_DONE]. -** ^If an error occurs while running sqlite3_backup_step(B,N), -** then an [error code] is returned. ^As well as [SQLITE_OK] and -** [SQLITE_DONE], a call to sqlite3_backup_step() may return [SQLITE_READONLY], -** [SQLITE_NOMEM], [SQLITE_BUSY], [SQLITE_LOCKED], or an -** [SQLITE_IOERR_ACCESS | SQLITE_IOERR_XXX] extended error code. -** -** ^(The sqlite3_backup_step() might return [SQLITE_READONLY] if -** <ol> -** <li> the destination database was opened read-only, or -** <li> the destination database is using write-ahead-log journaling -** and the destination and source page sizes differ, or -** <li> the destination database is an in-memory database and the -** destination and source page sizes differ. -** </ol>)^ -** -** ^If sqlite3_backup_step() cannot obtain a required file-system lock, then -** the [sqlite3_busy_handler | busy-handler function] -** is invoked (if one is specified). ^If the -** busy-handler returns non-zero before the lock is available, then -** [SQLITE_BUSY] is returned to the caller. ^In this case the call to -** sqlite3_backup_step() can be retried later. ^If the source -** [database connection] -** is being used to write to the source database when sqlite3_backup_step() -** is called, then [SQLITE_LOCKED] is returned immediately. ^Again, in this -** case the call to sqlite3_backup_step() can be retried later on. ^(If -** [SQLITE_IOERR_ACCESS | SQLITE_IOERR_XXX], [SQLITE_NOMEM], or -** [SQLITE_READONLY] is returned, then -** there is no point in retrying the call to sqlite3_backup_step(). These -** errors are considered fatal.)^ The application must accept -** that the backup operation has failed and pass the backup operation handle -** to the sqlite3_backup_finish() to release associated resources. -** -** ^The first call to sqlite3_backup_step() obtains an exclusive lock -** on the destination file. ^The exclusive lock is not released until either -** sqlite3_backup_finish() is called or the backup operation is complete -** and sqlite3_backup_step() returns [SQLITE_DONE]. ^Every call to -** sqlite3_backup_step() obtains a [shared lock] on the source database that -** lasts for the duration of the sqlite3_backup_step() call. -** ^Because the source database is not locked between calls to -** sqlite3_backup_step(), the source database may be modified mid-way -** through the backup process. ^If the source database is modified by an -** external process or via a database connection other than the one being -** used by the backup operation, then the backup will be automatically -** restarted by the next call to sqlite3_backup_step(). ^If the source -** database is modified by the using the same database connection as is used -** by the backup operation, then the backup database is automatically -** updated at the same time. -** -** [[sqlite3_backup_finish()]] <b>sqlite3_backup_finish()</b> -** -** When sqlite3_backup_step() has returned [SQLITE_DONE], or when the -** application wishes to abandon the backup operation, the application -** should destroy the [sqlite3_backup] by passing it to sqlite3_backup_finish(). -** ^The sqlite3_backup_finish() interfaces releases all -** resources associated with the [sqlite3_backup] object. -** ^If sqlite3_backup_step() has not yet returned [SQLITE_DONE], then any -** active write-transaction on the destination database is rolled back. -** The [sqlite3_backup] object is invalid -** and may not be used following a call to sqlite3_backup_finish(). -** -** ^The value returned by sqlite3_backup_finish is [SQLITE_OK] if no -** sqlite3_backup_step() errors occurred, regardless or whether or not -** sqlite3_backup_step() completed. -** ^If an out-of-memory condition or IO error occurred during any prior -** sqlite3_backup_step() call on the same [sqlite3_backup] object, then -** sqlite3_backup_finish() returns the corresponding [error code]. -** -** ^A return of [SQLITE_BUSY] or [SQLITE_LOCKED] from sqlite3_backup_step() -** is not a permanent error and does not affect the return value of -** sqlite3_backup_finish(). -** -** [[sqlite3_backup__remaining()]] [[sqlite3_backup_pagecount()]] -** <b>sqlite3_backup_remaining() and sqlite3_backup_pagecount()</b> -** -** ^Each call to sqlite3_backup_step() sets two values inside -** the [sqlite3_backup] object: the number of pages still to be backed -** up and the total number of pages in the source database file. -** The sqlite3_backup_remaining() and sqlite3_backup_pagecount() interfaces -** retrieve these two values, respectively. -** -** ^The values returned by these functions are only updated by -** sqlite3_backup_step(). ^If the source database is modified during a backup -** operation, then the values are not updated to account for any extra -** pages that need to be updated or the size of the source database file -** changing. -** -** <b>Concurrent Usage of Database Handles</b> -** -** ^The source [database connection] may be used by the application for other -** purposes while a backup operation is underway or being initialized. -** ^If SQLite is compiled and configured to support threadsafe database -** connections, then the source database connection may be used concurrently -** from within other threads. -** -** However, the application must guarantee that the destination -** [database connection] is not passed to any other API (by any thread) after -** sqlite3_backup_init() is called and before the corresponding call to -** sqlite3_backup_finish(). SQLite does not currently check to see -** if the application incorrectly accesses the destination [database connection] -** and so no error code is reported, but the operations may malfunction -** nevertheless. Use of the destination database connection while a -** backup is in progress might also also cause a mutex deadlock. -** -** If running in [shared cache mode], the application must -** guarantee that the shared cache used by the destination database -** is not accessed while the backup is running. In practice this means -** that the application must guarantee that the disk file being -** backed up to is not accessed by any connection within the process, -** not just the specific connection that was passed to sqlite3_backup_init(). -** -** The [sqlite3_backup] object itself is partially threadsafe. Multiple -** threads may safely make multiple concurrent calls to sqlite3_backup_step(). -** However, the sqlite3_backup_remaining() and sqlite3_backup_pagecount() -** APIs are not strictly speaking threadsafe. If they are invoked at the -** same time as another thread is invoking sqlite3_backup_step() it is -** possible that they return invalid values. -*/ -SQLITE_API sqlite3_backup *sqlite3_backup_init( - sqlite3 *pDest, /* Destination database handle */ - const char *zDestName, /* Destination database name */ - sqlite3 *pSource, /* Source database handle */ - const char *zSourceName /* Source database name */ -); -SQLITE_API int sqlite3_backup_step(sqlite3_backup *p, int nPage); -SQLITE_API int sqlite3_backup_finish(sqlite3_backup *p); -SQLITE_API int sqlite3_backup_remaining(sqlite3_backup *p); -SQLITE_API int sqlite3_backup_pagecount(sqlite3_backup *p); - -/* -** CAPI3REF: Unlock Notification -** -** ^When running in shared-cache mode, a database operation may fail with -** an [SQLITE_LOCKED] error if the required locks on the shared-cache or -** individual tables within the shared-cache cannot be obtained. See -** [SQLite Shared-Cache Mode] for a description of shared-cache locking. -** ^This API may be used to register a callback that SQLite will invoke -** when the connection currently holding the required lock relinquishes it. -** ^This API is only available if the library was compiled with the -** [SQLITE_ENABLE_UNLOCK_NOTIFY] C-preprocessor symbol defined. -** -** See Also: [Using the SQLite Unlock Notification Feature]. -** -** ^Shared-cache locks are released when a database connection concludes -** its current transaction, either by committing it or rolling it back. -** -** ^When a connection (known as the blocked connection) fails to obtain a -** shared-cache lock and SQLITE_LOCKED is returned to the caller, the -** identity of the database connection (the blocking connection) that -** has locked the required resource is stored internally. ^After an -** application receives an SQLITE_LOCKED error, it may call the -** sqlite3_unlock_notify() method with the blocked connection handle as -** the first argument to register for a callback that will be invoked -** when the blocking connections current transaction is concluded. ^The -** callback is invoked from within the [sqlite3_step] or [sqlite3_close] -** call that concludes the blocking connections transaction. -** -** ^(If sqlite3_unlock_notify() is called in a multi-threaded application, -** there is a chance that the blocking connection will have already -** concluded its transaction by the time sqlite3_unlock_notify() is invoked. -** If this happens, then the specified callback is invoked immediately, -** from within the call to sqlite3_unlock_notify().)^ -** -** ^If the blocked connection is attempting to obtain a write-lock on a -** shared-cache table, and more than one other connection currently holds -** a read-lock on the same table, then SQLite arbitrarily selects one of -** the other connections to use as the blocking connection. -** -** ^(There may be at most one unlock-notify callback registered by a -** blocked connection. If sqlite3_unlock_notify() is called when the -** blocked connection already has a registered unlock-notify callback, -** then the new callback replaces the old.)^ ^If sqlite3_unlock_notify() is -** called with a NULL pointer as its second argument, then any existing -** unlock-notify callback is canceled. ^The blocked connections -** unlock-notify callback may also be canceled by closing the blocked -** connection using [sqlite3_close()]. -** -** The unlock-notify callback is not reentrant. If an application invokes -** any sqlite3_xxx API functions from within an unlock-notify callback, a -** crash or deadlock may be the result. -** -** ^Unless deadlock is detected (see below), sqlite3_unlock_notify() always -** returns SQLITE_OK. -** -** <b>Callback Invocation Details</b> -** -** When an unlock-notify callback is registered, the application provides a -** single void* pointer that is passed to the callback when it is invoked. -** However, the signature of the callback function allows SQLite to pass -** it an array of void* context pointers. The first argument passed to -** an unlock-notify callback is a pointer to an array of void* pointers, -** and the second is the number of entries in the array. -** -** When a blocking connections transaction is concluded, there may be -** more than one blocked connection that has registered for an unlock-notify -** callback. ^If two or more such blocked connections have specified the -** same callback function, then instead of invoking the callback function -** multiple times, it is invoked once with the set of void* context pointers -** specified by the blocked connections bundled together into an array. -** This gives the application an opportunity to prioritize any actions -** related to the set of unblocked database connections. -** -** <b>Deadlock Detection</b> -** -** Assuming that after registering for an unlock-notify callback a -** database waits for the callback to be issued before taking any further -** action (a reasonable assumption), then using this API may cause the -** application to deadlock. For example, if connection X is waiting for -** connection Y's transaction to be concluded, and similarly connection -** Y is waiting on connection X's transaction, then neither connection -** will proceed and the system may remain deadlocked indefinitely. -** -** To avoid this scenario, the sqlite3_unlock_notify() performs deadlock -** detection. ^If a given call to sqlite3_unlock_notify() would put the -** system in a deadlocked state, then SQLITE_LOCKED is returned and no -** unlock-notify callback is registered. The system is said to be in -** a deadlocked state if connection A has registered for an unlock-notify -** callback on the conclusion of connection B's transaction, and connection -** B has itself registered for an unlock-notify callback when connection -** A's transaction is concluded. ^Indirect deadlock is also detected, so -** the system is also considered to be deadlocked if connection B has -** registered for an unlock-notify callback on the conclusion of connection -** C's transaction, where connection C is waiting on connection A. ^Any -** number of levels of indirection are allowed. -** -** <b>The "DROP TABLE" Exception</b> -** -** When a call to [sqlite3_step()] returns SQLITE_LOCKED, it is almost -** always appropriate to call sqlite3_unlock_notify(). There is however, -** one exception. When executing a "DROP TABLE" or "DROP INDEX" statement, -** SQLite checks if there are any currently executing SELECT statements -** that belong to the same connection. If there are, SQLITE_LOCKED is -** returned. In this case there is no "blocking connection", so invoking -** sqlite3_unlock_notify() results in the unlock-notify callback being -** invoked immediately. If the application then re-attempts the "DROP TABLE" -** or "DROP INDEX" query, an infinite loop might be the result. -** -** One way around this problem is to check the extended error code returned -** by an sqlite3_step() call. ^(If there is a blocking connection, then the -** extended error code is set to SQLITE_LOCKED_SHAREDCACHE. Otherwise, in -** the special "DROP TABLE/INDEX" case, the extended error code is just -** SQLITE_LOCKED.)^ -*/ -SQLITE_API int sqlite3_unlock_notify( - sqlite3 *pBlocked, /* Waiting connection */ - void (*xNotify)(void **apArg, int nArg), /* Callback function to invoke */ - void *pNotifyArg /* Argument to pass to xNotify */ -); - - -/* -** CAPI3REF: String Comparison -** -** ^The [sqlite3_stricmp()] and [sqlite3_strnicmp()] APIs allow applications -** and extensions to compare the contents of two buffers containing UTF-8 -** strings in a case-independent fashion, using the same definition of "case -** independence" that SQLite uses internally when comparing identifiers. -*/ -SQLITE_API int sqlite3_stricmp(const char *, const char *); -SQLITE_API int sqlite3_strnicmp(const char *, const char *, int); - -/* -** CAPI3REF: String Globbing -* -** ^The [sqlite3_strglob(P,X)] interface returns zero if string X matches -** the glob pattern P, and it returns non-zero if string X does not match -** the glob pattern P. ^The definition of glob pattern matching used in -** [sqlite3_strglob(P,X)] is the same as for the "X GLOB P" operator in the -** SQL dialect used by SQLite. ^The sqlite3_strglob(P,X) function is case -** sensitive. -** -** Note that this routine returns zero on a match and non-zero if the strings -** do not match, the same as [sqlite3_stricmp()] and [sqlite3_strnicmp()]. -*/ -SQLITE_API int sqlite3_strglob(const char *zGlob, const char *zStr); - -/* -** CAPI3REF: Error Logging Interface -** -** ^The [sqlite3_log()] interface writes a message into the [error log] -** established by the [SQLITE_CONFIG_LOG] option to [sqlite3_config()]. -** ^If logging is enabled, the zFormat string and subsequent arguments are -** used with [sqlite3_snprintf()] to generate the final output string. -** -** The sqlite3_log() interface is intended for use by extensions such as -** virtual tables, collating functions, and SQL functions. While there is -** nothing to prevent an application from calling sqlite3_log(), doing so -** is considered bad form. -** -** The zFormat string must not be NULL. -** -** To avoid deadlocks and other threading problems, the sqlite3_log() routine -** will not use dynamically allocated memory. The log message is stored in -** a fixed-length buffer on the stack. If the log message is longer than -** a few hundred characters, it will be truncated to the length of the -** buffer. -*/ -SQLITE_API void sqlite3_log(int iErrCode, const char *zFormat, ...); - -/* -** CAPI3REF: Write-Ahead Log Commit Hook -** -** ^The [sqlite3_wal_hook()] function is used to register a callback that -** is invoked each time data is committed to a database in wal mode. -** -** ^(The callback is invoked by SQLite after the commit has taken place and -** the associated write-lock on the database released)^, so the implementation -** may read, write or [checkpoint] the database as required. -** -** ^The first parameter passed to the callback function when it is invoked -** is a copy of the third parameter passed to sqlite3_wal_hook() when -** registering the callback. ^The second is a copy of the database handle. -** ^The third parameter is the name of the database that was written to - -** either "main" or the name of an [ATTACH]-ed database. ^The fourth parameter -** is the number of pages currently in the write-ahead log file, -** including those that were just committed. -** -** The callback function should normally return [SQLITE_OK]. ^If an error -** code is returned, that error will propagate back up through the -** SQLite code base to cause the statement that provoked the callback -** to report an error, though the commit will have still occurred. If the -** callback returns [SQLITE_ROW] or [SQLITE_DONE], or if it returns a value -** that does not correspond to any valid SQLite error code, the results -** are undefined. -** -** A single database handle may have at most a single write-ahead log callback -** registered at one time. ^Calling [sqlite3_wal_hook()] replaces any -** previously registered write-ahead log callback. ^Note that the -** [sqlite3_wal_autocheckpoint()] interface and the -** [wal_autocheckpoint pragma] both invoke [sqlite3_wal_hook()] and will -** those overwrite any prior [sqlite3_wal_hook()] settings. -*/ -SQLITE_API void *sqlite3_wal_hook( - sqlite3*, - int(*)(void *,sqlite3*,const char*,int), - void* -); - -/* -** CAPI3REF: Configure an auto-checkpoint -** -** ^The [sqlite3_wal_autocheckpoint(D,N)] is a wrapper around -** [sqlite3_wal_hook()] that causes any database on [database connection] D -** to automatically [checkpoint] -** after committing a transaction if there are N or -** more frames in the [write-ahead log] file. ^Passing zero or -** a negative value as the nFrame parameter disables automatic -** checkpoints entirely. -** -** ^The callback registered by this function replaces any existing callback -** registered using [sqlite3_wal_hook()]. ^Likewise, registering a callback -** using [sqlite3_wal_hook()] disables the automatic checkpoint mechanism -** configured by this function. -** -** ^The [wal_autocheckpoint pragma] can be used to invoke this interface -** from SQL. -** -** ^Checkpoints initiated by this mechanism are -** [sqlite3_wal_checkpoint_v2|PASSIVE]. -** -** ^Every new [database connection] defaults to having the auto-checkpoint -** enabled with a threshold of 1000 or [SQLITE_DEFAULT_WAL_AUTOCHECKPOINT] -** pages. The use of this interface -** is only necessary if the default setting is found to be suboptimal -** for a particular application. -*/ -SQLITE_API int sqlite3_wal_autocheckpoint(sqlite3 *db, int N); - -/* -** CAPI3REF: Checkpoint a database -** -** ^(The sqlite3_wal_checkpoint(D,X) is equivalent to -** [sqlite3_wal_checkpoint_v2](D,X,[SQLITE_CHECKPOINT_PASSIVE],0,0).)^ -** -** In brief, sqlite3_wal_checkpoint(D,X) causes the content in the -** [write-ahead log] for database X on [database connection] D to be -** transferred into the database file and for the write-ahead log to -** be reset. See the [checkpointing] documentation for addition -** information. -** -** This interface used to be the only way to cause a checkpoint to -** occur. But then the newer and more powerful [sqlite3_wal_checkpoint_v2()] -** interface was added. This interface is retained for backwards -** compatibility and as a convenience for applications that need to manually -** start a callback but which do not need the full power (and corresponding -** complication) of [sqlite3_wal_checkpoint_v2()]. -*/ -SQLITE_API int sqlite3_wal_checkpoint(sqlite3 *db, const char *zDb); - -/* -** CAPI3REF: Checkpoint a database -** -** ^(The sqlite3_wal_checkpoint_v2(D,X,M,L,C) interface runs a checkpoint -** operation on database X of [database connection] D in mode M. Status -** information is written back into integers pointed to by L and C.)^ -** ^(The M parameter must be a valid [checkpoint mode]:)^ -** -** <dl> -** <dt>SQLITE_CHECKPOINT_PASSIVE<dd> -** ^Checkpoint as many frames as possible without waiting for any database -** readers or writers to finish, then sync the database file if all frames -** in the log were checkpointed. ^The [busy-handler callback] -** is never invoked in the SQLITE_CHECKPOINT_PASSIVE mode. -** ^On the other hand, passive mode might leave the checkpoint unfinished -** if there are concurrent readers or writers. -** -** <dt>SQLITE_CHECKPOINT_FULL<dd> -** ^This mode blocks (it invokes the -** [sqlite3_busy_handler|busy-handler callback]) until there is no -** database writer and all readers are reading from the most recent database -** snapshot. ^It then checkpoints all frames in the log file and syncs the -** database file. ^This mode blocks new database writers while it is pending, -** but new database readers are allowed to continue unimpeded. -** -** <dt>SQLITE_CHECKPOINT_RESTART<dd> -** ^This mode works the same way as SQLITE_CHECKPOINT_FULL with the addition -** that after checkpointing the log file it blocks (calls the -** [busy-handler callback]) -** until all readers are reading from the database file only. ^This ensures -** that the next writer will restart the log file from the beginning. -** ^Like SQLITE_CHECKPOINT_FULL, this mode blocks new -** database writer attempts while it is pending, but does not impede readers. -** -** <dt>SQLITE_CHECKPOINT_TRUNCATE<dd> -** ^This mode works the same way as SQLITE_CHECKPOINT_RESTART with the -** addition that it also truncates the log file to zero bytes just prior -** to a successful return. -** </dl> -** -** ^If pnLog is not NULL, then *pnLog is set to the total number of frames in -** the log file or to -1 if the checkpoint could not run because -** of an error or because the database is not in [WAL mode]. ^If pnCkpt is not -** NULL,then *pnCkpt is set to the total number of checkpointed frames in the -** log file (including any that were already checkpointed before the function -** was called) or to -1 if the checkpoint could not run due to an error or -** because the database is not in WAL mode. ^Note that upon successful -** completion of an SQLITE_CHECKPOINT_TRUNCATE, the log file will have been -** truncated to zero bytes and so both *pnLog and *pnCkpt will be set to zero. -** -** ^All calls obtain an exclusive "checkpoint" lock on the database file. ^If -** any other process is running a checkpoint operation at the same time, the -** lock cannot be obtained and SQLITE_BUSY is returned. ^Even if there is a -** busy-handler configured, it will not be invoked in this case. -** -** ^The SQLITE_CHECKPOINT_FULL, RESTART and TRUNCATE modes also obtain the -** exclusive "writer" lock on the database file. ^If the writer lock cannot be -** obtained immediately, and a busy-handler is configured, it is invoked and -** the writer lock retried until either the busy-handler returns 0 or the lock -** is successfully obtained. ^The busy-handler is also invoked while waiting for -** database readers as described above. ^If the busy-handler returns 0 before -** the writer lock is obtained or while waiting for database readers, the -** checkpoint operation proceeds from that point in the same way as -** SQLITE_CHECKPOINT_PASSIVE - checkpointing as many frames as possible -** without blocking any further. ^SQLITE_BUSY is returned in this case. -** -** ^If parameter zDb is NULL or points to a zero length string, then the -** specified operation is attempted on all WAL databases [attached] to -** [database connection] db. In this case the -** values written to output parameters *pnLog and *pnCkpt are undefined. ^If -** an SQLITE_BUSY error is encountered when processing one or more of the -** attached WAL databases, the operation is still attempted on any remaining -** attached databases and SQLITE_BUSY is returned at the end. ^If any other -** error occurs while processing an attached database, processing is abandoned -** and the error code is returned to the caller immediately. ^If no error -** (SQLITE_BUSY or otherwise) is encountered while processing the attached -** databases, SQLITE_OK is returned. -** -** ^If database zDb is the name of an attached database that is not in WAL -** mode, SQLITE_OK is returned and both *pnLog and *pnCkpt set to -1. ^If -** zDb is not NULL (or a zero length string) and is not the name of any -** attached database, SQLITE_ERROR is returned to the caller. -** -** ^Unless it returns SQLITE_MISUSE, -** the sqlite3_wal_checkpoint_v2() interface -** sets the error information that is queried by -** [sqlite3_errcode()] and [sqlite3_errmsg()]. -** -** ^The [PRAGMA wal_checkpoint] command can be used to invoke this interface -** from SQL. -*/ -SQLITE_API int sqlite3_wal_checkpoint_v2( - sqlite3 *db, /* Database handle */ - const char *zDb, /* Name of attached database (or NULL) */ - int eMode, /* SQLITE_CHECKPOINT_* value */ - int *pnLog, /* OUT: Size of WAL log in frames */ - int *pnCkpt /* OUT: Total number of frames checkpointed */ -); - -/* -** CAPI3REF: Checkpoint Mode Values -** KEYWORDS: {checkpoint mode} -** -** These constants define all valid values for the "checkpoint mode" passed -** as the third parameter to the [sqlite3_wal_checkpoint_v2()] interface. -** See the [sqlite3_wal_checkpoint_v2()] documentation for details on the -** meaning of each of these checkpoint modes. -*/ -#define SQLITE_CHECKPOINT_PASSIVE 0 /* Do as much as possible w/o blocking */ -#define SQLITE_CHECKPOINT_FULL 1 /* Wait for writers, then checkpoint */ -#define SQLITE_CHECKPOINT_RESTART 2 /* Like FULL but wait for for readers */ -#define SQLITE_CHECKPOINT_TRUNCATE 3 /* Like RESTART but also truncate WAL */ - -/* -** CAPI3REF: Virtual Table Interface Configuration -** -** This function may be called by either the [xConnect] or [xCreate] method -** of a [virtual table] implementation to configure -** various facets of the virtual table interface. -** -** If this interface is invoked outside the context of an xConnect or -** xCreate virtual table method then the behavior is undefined. -** -** At present, there is only one option that may be configured using -** this function. (See [SQLITE_VTAB_CONSTRAINT_SUPPORT].) Further options -** may be added in the future. -*/ -SQLITE_API int sqlite3_vtab_config(sqlite3*, int op, ...); - -/* -** CAPI3REF: Virtual Table Configuration Options -** -** These macros define the various options to the -** [sqlite3_vtab_config()] interface that [virtual table] implementations -** can use to customize and optimize their behavior. -** -** <dl> -** <dt>SQLITE_VTAB_CONSTRAINT_SUPPORT -** <dd>Calls of the form -** [sqlite3_vtab_config](db,SQLITE_VTAB_CONSTRAINT_SUPPORT,X) are supported, -** where X is an integer. If X is zero, then the [virtual table] whose -** [xCreate] or [xConnect] method invoked [sqlite3_vtab_config()] does not -** support constraints. In this configuration (which is the default) if -** a call to the [xUpdate] method returns [SQLITE_CONSTRAINT], then the entire -** statement is rolled back as if [ON CONFLICT | OR ABORT] had been -** specified as part of the users SQL statement, regardless of the actual -** ON CONFLICT mode specified. -** -** If X is non-zero, then the virtual table implementation guarantees -** that if [xUpdate] returns [SQLITE_CONSTRAINT], it will do so before -** any modifications to internal or persistent data structures have been made. -** If the [ON CONFLICT] mode is ABORT, FAIL, IGNORE or ROLLBACK, SQLite -** is able to roll back a statement or database transaction, and abandon -** or continue processing the current SQL statement as appropriate. -** If the ON CONFLICT mode is REPLACE and the [xUpdate] method returns -** [SQLITE_CONSTRAINT], SQLite handles this as if the ON CONFLICT mode -** had been ABORT. -** -** Virtual table implementations that are required to handle OR REPLACE -** must do so within the [xUpdate] method. If a call to the -** [sqlite3_vtab_on_conflict()] function indicates that the current ON -** CONFLICT policy is REPLACE, the virtual table implementation should -** silently replace the appropriate rows within the xUpdate callback and -** return SQLITE_OK. Or, if this is not possible, it may return -** SQLITE_CONSTRAINT, in which case SQLite falls back to OR ABORT -** constraint handling. -** </dl> -*/ -#define SQLITE_VTAB_CONSTRAINT_SUPPORT 1 - -/* -** CAPI3REF: Determine The Virtual Table Conflict Policy -** -** This function may only be called from within a call to the [xUpdate] method -** of a [virtual table] implementation for an INSERT or UPDATE operation. ^The -** value returned is one of [SQLITE_ROLLBACK], [SQLITE_IGNORE], [SQLITE_FAIL], -** [SQLITE_ABORT], or [SQLITE_REPLACE], according to the [ON CONFLICT] mode -** of the SQL statement that triggered the call to the [xUpdate] method of the -** [virtual table]. -*/ -SQLITE_API int sqlite3_vtab_on_conflict(sqlite3 *); - -/* -** CAPI3REF: Conflict resolution modes -** KEYWORDS: {conflict resolution mode} -** -** These constants are returned by [sqlite3_vtab_on_conflict()] to -** inform a [virtual table] implementation what the [ON CONFLICT] mode -** is for the SQL statement being evaluated. -** -** Note that the [SQLITE_IGNORE] constant is also used as a potential -** return value from the [sqlite3_set_authorizer()] callback and that -** [SQLITE_ABORT] is also a [result code]. -*/ -#define SQLITE_ROLLBACK 1 -/* #define SQLITE_IGNORE 2 // Also used by sqlite3_authorizer() callback */ -#define SQLITE_FAIL 3 -/* #define SQLITE_ABORT 4 // Also an error code */ -#define SQLITE_REPLACE 5 - -/* -** CAPI3REF: Prepared Statement Scan Status Opcodes -** KEYWORDS: {scanstatus options} -** -** The following constants can be used for the T parameter to the -** [sqlite3_stmt_scanstatus(S,X,T,V)] interface. Each constant designates a -** different metric for sqlite3_stmt_scanstatus() to return. -** -** When the value returned to V is a string, space to hold that string is -** managed by the prepared statement S and will be automatically freed when -** S is finalized. -** -** <dl> -** [[SQLITE_SCANSTAT_NLOOP]] <dt>SQLITE_SCANSTAT_NLOOP</dt> -** <dd>^The [sqlite3_int64] variable pointed to by the T parameter will be -** set to the total number of times that the X-th loop has run.</dd> -** -** [[SQLITE_SCANSTAT_NVISIT]] <dt>SQLITE_SCANSTAT_NVISIT</dt> -** <dd>^The [sqlite3_int64] variable pointed to by the T parameter will be set -** to the total number of rows examined by all iterations of the X-th loop.</dd> -** -** [[SQLITE_SCANSTAT_EST]] <dt>SQLITE_SCANSTAT_EST</dt> -** <dd>^The "double" variable pointed to by the T parameter will be set to the -** query planner's estimate for the average number of rows output from each -** iteration of the X-th loop. If the query planner's estimates was accurate, -** then this value will approximate the quotient NVISIT/NLOOP and the -** product of this value for all prior loops with the same SELECTID will -** be the NLOOP value for the current loop. -** -** [[SQLITE_SCANSTAT_NAME]] <dt>SQLITE_SCANSTAT_NAME</dt> -** <dd>^The "const char *" variable pointed to by the T parameter will be set -** to a zero-terminated UTF-8 string containing the name of the index or table -** used for the X-th loop. -** -** [[SQLITE_SCANSTAT_EXPLAIN]] <dt>SQLITE_SCANSTAT_EXPLAIN</dt> -** <dd>^The "const char *" variable pointed to by the T parameter will be set -** to a zero-terminated UTF-8 string containing the [EXPLAIN QUERY PLAN] -** description for the X-th loop. -** -** [[SQLITE_SCANSTAT_SELECTID]] <dt>SQLITE_SCANSTAT_SELECT</dt> -** <dd>^The "int" variable pointed to by the T parameter will be set to the -** "select-id" for the X-th loop. The select-id identifies which query or -** subquery the loop is part of. The main query has a select-id of zero. -** The select-id is the same value as is output in the first column -** of an [EXPLAIN QUERY PLAN] query. -** </dl> -*/ -#define SQLITE_SCANSTAT_NLOOP 0 -#define SQLITE_SCANSTAT_NVISIT 1 -#define SQLITE_SCANSTAT_EST 2 -#define SQLITE_SCANSTAT_NAME 3 -#define SQLITE_SCANSTAT_EXPLAIN 4 -#define SQLITE_SCANSTAT_SELECTID 5 - -/* -** CAPI3REF: Prepared Statement Scan Status -** -** This interface returns information about the predicted and measured -** performance for pStmt. Advanced applications can use this -** interface to compare the predicted and the measured performance and -** issue warnings and/or rerun [ANALYZE] if discrepancies are found. -** -** Since this interface is expected to be rarely used, it is only -** available if SQLite is compiled using the [SQLITE_ENABLE_STMT_SCANSTATUS] -** compile-time option. -** -** The "iScanStatusOp" parameter determines which status information to return. -** The "iScanStatusOp" must be one of the [scanstatus options] or the behavior -** of this interface is undefined. -** ^The requested measurement is written into a variable pointed to by -** the "pOut" parameter. -** Parameter "idx" identifies the specific loop to retrieve statistics for. -** Loops are numbered starting from zero. ^If idx is out of range - less than -** zero or greater than or equal to the total number of loops used to implement -** the statement - a non-zero value is returned and the variable that pOut -** points to is unchanged. -** -** ^Statistics might not be available for all loops in all statements. ^In cases -** where there exist loops with no available statistics, this function behaves -** as if the loop did not exist - it returns non-zero and leave the variable -** that pOut points to unchanged. -** -** See also: [sqlite3_stmt_scanstatus_reset()] -*/ -SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_stmt_scanstatus( - sqlite3_stmt *pStmt, /* Prepared statement for which info desired */ - int idx, /* Index of loop to report on */ - int iScanStatusOp, /* Information desired. SQLITE_SCANSTAT_* */ - void *pOut /* Result written here */ -); - -/* -** CAPI3REF: Zero Scan-Status Counters -** -** ^Zero all [sqlite3_stmt_scanstatus()] related event counters. -** -** This API is only available if the library is built with pre-processor -** symbol [SQLITE_ENABLE_STMT_SCANSTATUS] defined. -*/ -SQLITE_API SQLITE_EXPERIMENTAL void sqlite3_stmt_scanstatus_reset(sqlite3_stmt*); - - -/* -** Undo the hack that converts floating point types to integer for -** builds on processors without floating point support. -*/ -#ifdef SQLITE_OMIT_FLOATING_POINT -# undef double -#endif - -#ifdef __cplusplus -} /* End of the 'extern "C"' block */ -#endif -#endif /* _SQLITE3_H_ */ - -/* -** 2010 August 30 -** -** The author disclaims copyright to this source code. In place of -** a legal notice, here is a blessing: -** -** May you do good and not evil. -** May you find forgiveness for yourself and forgive others. -** May you share freely, never taking more than you give. -** -************************************************************************* -*/ - -#ifndef _SQLITE3RTREE_H_ -#define _SQLITE3RTREE_H_ - - -#ifdef __cplusplus -extern "C" { -#endif - -typedef struct sqlite3_rtree_geometry sqlite3_rtree_geometry; -typedef struct sqlite3_rtree_query_info sqlite3_rtree_query_info; - -/* The double-precision datatype used by RTree depends on the -** SQLITE_RTREE_INT_ONLY compile-time option. -*/ -#ifdef SQLITE_RTREE_INT_ONLY - typedef sqlite3_int64 sqlite3_rtree_dbl; -#else - typedef double sqlite3_rtree_dbl; -#endif - -/* -** Register a geometry callback named zGeom that can be used as part of an -** R-Tree geometry query as follows: -** -** SELECT ... FROM <rtree> WHERE <rtree col> MATCH $zGeom(... params ...) -*/ -SQLITE_API int sqlite3_rtree_geometry_callback( - sqlite3 *db, - const char *zGeom, - int (*xGeom)(sqlite3_rtree_geometry*, int, sqlite3_rtree_dbl*,int*), - void *pContext -); - - -/* -** A pointer to a structure of the following type is passed as the first -** argument to callbacks registered using rtree_geometry_callback(). -*/ -struct sqlite3_rtree_geometry { - void *pContext; /* Copy of pContext passed to s_r_g_c() */ - int nParam; /* Size of array aParam[] */ - sqlite3_rtree_dbl *aParam; /* Parameters passed to SQL geom function */ - void *pUser; /* Callback implementation user data */ - void (*xDelUser)(void *); /* Called by SQLite to clean up pUser */ -}; - -/* -** Register a 2nd-generation geometry callback named zScore that can be -** used as part of an R-Tree geometry query as follows: -** -** SELECT ... FROM <rtree> WHERE <rtree col> MATCH $zQueryFunc(... params ...) -*/ -SQLITE_API int sqlite3_rtree_query_callback( - sqlite3 *db, - const char *zQueryFunc, - int (*xQueryFunc)(sqlite3_rtree_query_info*), - void *pContext, - void (*xDestructor)(void*) -); - - -/* -** A pointer to a structure of the following type is passed as the -** argument to scored geometry callback registered using -** sqlite3_rtree_query_callback(). -** -** Note that the first 5 fields of this structure are identical to -** sqlite3_rtree_geometry. This structure is a subclass of -** sqlite3_rtree_geometry. -*/ -struct sqlite3_rtree_query_info { - void *pContext; /* pContext from when function registered */ - int nParam; /* Number of function parameters */ - sqlite3_rtree_dbl *aParam; /* value of function parameters */ - void *pUser; /* callback can use this, if desired */ - void (*xDelUser)(void*); /* function to free pUser */ - sqlite3_rtree_dbl *aCoord; /* Coordinates of node or entry to check */ - unsigned int *anQueue; /* Number of pending entries in the queue */ - int nCoord; /* Number of coordinates */ - int iLevel; /* Level of current node or entry */ - int mxLevel; /* The largest iLevel value in the tree */ - sqlite3_int64 iRowid; /* Rowid for current entry */ - sqlite3_rtree_dbl rParentScore; /* Score of parent node */ - int eParentWithin; /* Visibility of parent node */ - int eWithin; /* OUT: Visiblity */ - sqlite3_rtree_dbl rScore; /* OUT: Write the score here */ -}; - -/* -** Allowed values for sqlite3_rtree_query.eWithin and .eParentWithin. -*/ -#define NOT_WITHIN 0 /* Object completely outside of query region */ -#define PARTLY_WITHIN 1 /* Object partially overlaps query region */ -#define FULLY_WITHIN 2 /* Object fully contained within query region */ - - -#ifdef __cplusplus -} /* end of the 'extern "C"' block */ -#endif - -#endif /* ifndef _SQLITE3RTREE_H_ */ - |