mariadb/sql/sql_repl.cc
unknown 79479ee975 After-merge fixes for 5.5 merge.
Fix typo causing too low timeout value for wait_for_slave_param.inc.
Fix binlog checksums following 5.5 merge.
Make sure the rpl suite can run with --mysqld=--binlog-checksum=CRC32
Fix a number of problems in the code when checksums are enabled.
2011-12-14 12:02:03 +01:00

2245 lines
69 KiB
C++

/* Copyright (c) 2000, 2011, Oracle and/or its affiliates.
Copyright (c) 2009-2011, Monty Program Ab
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; version 2 of the License.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */
#include "sql_priv.h"
#include "unireg.h"
#include "sql_parse.h" // check_access
#ifdef HAVE_REPLICATION
#include "rpl_mi.h"
#include "sql_repl.h"
#include "sql_acl.h" // SUPER_ACL
#include "log_event.h"
#include "rpl_filter.h"
#include <my_dir.h>
#include "rpl_handler.h"
#include "debug_sync.h"
int max_binlog_dump_events = 0; // unlimited
my_bool opt_sporadic_binlog_dump_fail = 0;
#ifndef DBUG_OFF
static int binlog_dump_count = 0;
#endif
/**
a copy of active_mi->rli->slave_skip_counter, for showing in SHOW VARIABLES,
INFORMATION_SCHEMA.GLOBAL_VARIABLES and @@sql_slave_skip_counter without
taking all the mutexes needed to access active_mi->rli->slave_skip_counter
properly.
*/
uint sql_slave_skip_counter;
extern TYPELIB binlog_checksum_typelib;
/*
fake_rotate_event() builds a fake (=which does not exist physically in any
binlog) Rotate event, which contains the name of the binlog we are going to
send to the slave (because the slave may not know it if it just asked for
MASTER_LOG_FILE='', MASTER_LOG_POS=4).
< 4.0.14, fake_rotate_event() was called only if the requested pos was 4.
After this version we always call it, so that a 3.23.58 slave can rely on
it to detect if the master is 4.0 (and stop) (the _fake_ Rotate event has
zeros in the good positions which, by chance, make it possible for the 3.23
slave to detect that this event is unexpected) (this is luck which happens
because the master and slave disagree on the size of the header of
Log_event).
Relying on the event length of the Rotate event instead of these
well-placed zeros was not possible as Rotate events have a variable-length
part.
*/
static int fake_rotate_event(NET* net, String* packet, char* log_file_name,
ulonglong position, const char** errmsg,
uint8 checksum_alg_arg)
{
DBUG_ENTER("fake_rotate_event");
char header[LOG_EVENT_HEADER_LEN], buf[ROTATE_HEADER_LEN+100];
/*
this Rotate is to be sent with checksum if and only if
slave's get_master_version_and_clock time handshake value
of master's @@global.binlog_checksum was TRUE
*/
my_bool do_checksum= checksum_alg_arg != BINLOG_CHECKSUM_ALG_OFF &&
checksum_alg_arg != BINLOG_CHECKSUM_ALG_UNDEF;
/*
'when' (the timestamp) is set to 0 so that slave could distinguish between
real and fake Rotate events (if necessary)
*/
memset(header, 0, 4);
header[EVENT_TYPE_OFFSET] = ROTATE_EVENT;
char* p = log_file_name+dirname_length(log_file_name);
uint ident_len = (uint) strlen(p);
ulong event_len = ident_len + LOG_EVENT_HEADER_LEN + ROTATE_HEADER_LEN +
(do_checksum ? BINLOG_CHECKSUM_LEN : 0);
int4store(header + SERVER_ID_OFFSET, server_id);
int4store(header + EVENT_LEN_OFFSET, event_len);
int2store(header + FLAGS_OFFSET, LOG_EVENT_ARTIFICIAL_F);
// TODO: check what problems this may cause and fix them
int4store(header + LOG_POS_OFFSET, 0);
packet->append(header, sizeof(header));
int8store(buf+R_POS_OFFSET,position);
packet->append(buf, ROTATE_HEADER_LEN);
packet->append(p, ident_len);
if (do_checksum)
{
char b[BINLOG_CHECKSUM_LEN];
ha_checksum crc= my_checksum(0L, NULL, 0);
crc= my_checksum(crc, (uchar*)header, sizeof(header));
crc= my_checksum(crc, (uchar*)buf, ROTATE_HEADER_LEN);
crc= my_checksum(crc, (uchar*)p, ident_len);
int4store(b, crc);
packet->append(b, sizeof(b));
}
if (my_net_write(net, (uchar*) packet->ptr(), packet->length()))
{
*errmsg = "failed on my_net_write()";
DBUG_RETURN(-1);
}
DBUG_RETURN(0);
}
/*
Reset thread transmit packet buffer for event sending
This function allocates header bytes for event transmission, and
should be called before store the event data to the packet buffer.
*/
static int reset_transmit_packet(THD *thd, ushort flags,
ulong *ev_offset, const char **errmsg)
{
int ret= 0;
String *packet= &thd->packet;
/* reserve and set default header */
packet->length(0);
packet->set("\0", 1, &my_charset_bin);
if (RUN_HOOK(binlog_transmit, reserve_header, (thd, flags, packet)))
{
*errmsg= "Failed to run hook 'reserve_header'";
my_errno= ER_UNKNOWN_ERROR;
ret= 1;
}
*ev_offset= packet->length();
return ret;
}
static int send_file(THD *thd)
{
NET* net = &thd->net;
int fd = -1, error = 1;
size_t bytes;
char fname[FN_REFLEN+1];
const char *errmsg = 0;
int old_timeout;
unsigned long packet_len;
uchar buf[IO_SIZE]; // It's safe to alloc this
DBUG_ENTER("send_file");
/*
The client might be slow loading the data, give him wait_timeout to do
the job
*/
old_timeout= net->read_timeout;
my_net_set_read_timeout(net, thd->variables.net_wait_timeout);
/*
We need net_flush here because the client will not know it needs to send
us the file name until it has processed the load event entry
*/
if (net_flush(net) || (packet_len = my_net_read(net)) == packet_error)
{
errmsg = "while reading file name";
goto err;
}
// terminate with \0 for fn_format
*((char*)net->read_pos + packet_len) = 0;
fn_format(fname, (char*) net->read_pos + 1, "", "", 4);
// this is needed to make replicate-ignore-db
if (!strcmp(fname,"/dev/null"))
goto end;
if ((fd= mysql_file_open(key_file_send_file,
fname, O_RDONLY, MYF(0))) < 0)
{
errmsg = "on open of file";
goto err;
}
while ((long) (bytes= mysql_file_read(fd, buf, IO_SIZE, MYF(0))) > 0)
{
if (my_net_write(net, buf, bytes))
{
errmsg = "while writing data to client";
goto err;
}
}
end:
if (my_net_write(net, (uchar*) "", 0) || net_flush(net) ||
(my_net_read(net) == packet_error))
{
errmsg = "while negotiating file transfer close";
goto err;
}
error = 0;
err:
my_net_set_read_timeout(net, old_timeout);
if (fd >= 0)
mysql_file_close(fd, MYF(0));
if (errmsg)
{
sql_print_error("Failed in send_file() %s", errmsg);
DBUG_PRINT("error", ("%s", errmsg));
}
DBUG_RETURN(error);
}
/**
Internal to mysql_binlog_send() routine that recalculates checksum for
a FD event (asserted) that needs additional arranment prior sending to slave.
*/
inline void fix_checksum(String *packet, ulong ev_offset)
{
/* recalculate the crc for this event */
uint data_len = uint4korr(packet->ptr() + ev_offset + EVENT_LEN_OFFSET);
ha_checksum crc= my_checksum(0L, NULL, 0);
DBUG_ASSERT(data_len ==
LOG_EVENT_MINIMAL_HEADER_LEN + FORMAT_DESCRIPTION_HEADER_LEN +
BINLOG_CHECKSUM_ALG_DESC_LEN + BINLOG_CHECKSUM_LEN);
crc= my_checksum(crc, (uchar *)packet->ptr() + ev_offset, data_len -
BINLOG_CHECKSUM_LEN);
int4store(packet->ptr() + ev_offset + data_len - BINLOG_CHECKSUM_LEN, crc);
}
static user_var_entry * get_binlog_checksum_uservar(THD * thd)
{
LEX_STRING name= { C_STRING_WITH_LEN("master_binlog_checksum")};
user_var_entry *entry=
(user_var_entry*) my_hash_search(&thd->user_vars, (uchar*) name.str,
name.length);
return entry;
}
/**
Function for calling in mysql_binlog_send
to check if slave initiated checksum-handshake.
@param[in] thd THD to access a user variable
@return TRUE if handshake took place, FALSE otherwise
*/
static bool is_slave_checksum_aware(THD * thd)
{
DBUG_ENTER("is_slave_checksum_aware");
user_var_entry *entry= get_binlog_checksum_uservar(thd);
DBUG_RETURN(entry? true : false);
}
/**
Function for calling in mysql_binlog_send
to get the value of @@binlog_checksum of the master at
time of checksum-handshake.
The value tells the master whether to compute or not, and the slave
to verify or not the first artificial Rotate event's checksum.
@param[in] thd THD to access a user variable
@return value of @@binlog_checksum alg according to
@c enum enum_binlog_checksum_alg
*/
static uint8 get_binlog_checksum_value_at_connect(THD * thd)
{
uint8 ret;
DBUG_ENTER("get_binlog_checksum_value_at_connect");
user_var_entry *entry= get_binlog_checksum_uservar(thd);
if (!entry)
{
ret= BINLOG_CHECKSUM_ALG_UNDEF;
}
else
{
DBUG_ASSERT(entry->type == STRING_RESULT);
String str;
uint dummy_errors;
str.copy(entry->value, entry->length, &my_charset_bin, &my_charset_bin,
&dummy_errors);
ret= (uint8) find_type ((char*) str.ptr(), &binlog_checksum_typelib, 1) - 1;
DBUG_ASSERT(ret <= BINLOG_CHECKSUM_ALG_CRC32); // while it's just on CRC32 alg
}
DBUG_RETURN(ret);
}
/*
Adjust the position pointer in the binary log file for all running slaves
SYNOPSIS
adjust_linfo_offsets()
purge_offset Number of bytes removed from start of log index file
NOTES
- This is called when doing a PURGE when we delete lines from the
index log file
REQUIREMENTS
- Before calling this function, we have to ensure that no threads are
using any binary log file before purge_offset.a
TODO
- Inform the slave threads that they should sync the position
in the binary log file with flush_relay_log_info.
Now they sync is done for next read.
*/
void adjust_linfo_offsets(my_off_t purge_offset)
{
THD *tmp;
mysql_mutex_lock(&LOCK_thread_count);
I_List_iterator<THD> it(threads);
while ((tmp=it++))
{
LOG_INFO* linfo;
if ((linfo = tmp->current_linfo))
{
mysql_mutex_lock(&linfo->lock);
/*
Index file offset can be less that purge offset only if
we just started reading the index file. In that case
we have nothing to adjust
*/
if (linfo->index_file_offset < purge_offset)
linfo->fatal = (linfo->index_file_offset != 0);
else
linfo->index_file_offset -= purge_offset;
mysql_mutex_unlock(&linfo->lock);
}
}
mysql_mutex_unlock(&LOCK_thread_count);
}
bool log_in_use(const char* log_name)
{
size_t log_name_len = strlen(log_name) + 1;
THD *tmp;
bool result = 0;
mysql_mutex_lock(&LOCK_thread_count);
I_List_iterator<THD> it(threads);
while ((tmp=it++))
{
LOG_INFO* linfo;
if ((linfo = tmp->current_linfo))
{
mysql_mutex_lock(&linfo->lock);
result = !memcmp(log_name, linfo->log_file_name, log_name_len);
mysql_mutex_unlock(&linfo->lock);
if (result)
break;
}
}
mysql_mutex_unlock(&LOCK_thread_count);
return result;
}
bool purge_error_message(THD* thd, int res)
{
uint errcode;
if ((errcode= purge_log_get_error_code(res)) != 0)
{
my_message(errcode, ER(errcode), MYF(0));
return TRUE;
}
my_ok(thd);
return FALSE;
}
/**
Execute a PURGE BINARY LOGS TO <log> command.
@param thd Pointer to THD object for the client thread executing the
statement.
@param to_log Name of the last log to purge.
@retval FALSE success
@retval TRUE failure
*/
bool purge_master_logs(THD* thd, const char* to_log)
{
char search_file_name[FN_REFLEN];
if (!mysql_bin_log.is_open())
{
my_ok(thd);
return FALSE;
}
mysql_bin_log.make_log_name(search_file_name, to_log);
return purge_error_message(thd,
mysql_bin_log.purge_logs(search_file_name, 0, 1,
1, NULL));
}
/**
Execute a PURGE BINARY LOGS BEFORE <date> command.
@param thd Pointer to THD object for the client thread executing the
statement.
@param purge_time Date before which logs should be purged.
@retval FALSE success
@retval TRUE failure
*/
bool purge_master_logs_before_date(THD* thd, time_t purge_time)
{
if (!mysql_bin_log.is_open())
{
my_ok(thd);
return 0;
}
return purge_error_message(thd,
mysql_bin_log.purge_logs_before_date(purge_time));
}
int test_for_non_eof_log_read_errors(int error, const char **errmsg)
{
if (error == LOG_READ_EOF)
return 0;
my_errno= ER_MASTER_FATAL_ERROR_READING_BINLOG;
switch (error) {
case LOG_READ_BOGUS:
*errmsg = "bogus data in log event";
break;
case LOG_READ_TOO_LARGE:
*errmsg = "log event entry exceeded max_allowed_packet; \
Increase max_allowed_packet on master";
break;
case LOG_READ_IO:
*errmsg = "I/O error reading log event";
break;
case LOG_READ_MEM:
*errmsg = "memory allocation failed reading log event";
break;
case LOG_READ_TRUNC:
*errmsg = "binlog truncated in the middle of event; consider out of disk space on master";
break;
case LOG_READ_CHECKSUM_FAILURE:
*errmsg = "event read from binlog did not pass crc check";
break;
default:
*errmsg = "unknown error reading log event on the master";
break;
}
return error;
}
/**
An auxiliary function for calling in mysql_binlog_send
to initialize the heartbeat timeout in waiting for a binlogged event.
@param[in] thd THD to access a user variable
@return heartbeat period an ulonglong of nanoseconds
or zero if heartbeat was not demanded by slave
*/
static ulonglong get_heartbeat_period(THD * thd)
{
bool null_value;
LEX_STRING name= { C_STRING_WITH_LEN("master_heartbeat_period")};
user_var_entry *entry=
(user_var_entry*) my_hash_search(&thd->user_vars, (uchar*) name.str,
name.length);
return entry? entry->val_int(&null_value) : 0;
}
/*
Function prepares and sends repliation heartbeat event.
@param net net object of THD
@param packet buffer to store the heartbeat instance
@param event_coordinates binlog file name and position of the last
real event master sent from binlog
@note
Among three essential pieces of heartbeat data Log_event::when
is computed locally.
The error to send is serious and should force terminating
the dump thread.
*/
static int send_heartbeat_event(NET* net, String* packet,
const struct event_coordinates *coord,
uint8 checksum_alg_arg)
{
DBUG_ENTER("send_heartbeat_event");
char header[LOG_EVENT_HEADER_LEN];
my_bool do_checksum= checksum_alg_arg != BINLOG_CHECKSUM_ALG_OFF &&
checksum_alg_arg != BINLOG_CHECKSUM_ALG_UNDEF;
/*
'when' (the timestamp) is set to 0 so that slave could distinguish between
real and fake Rotate events (if necessary)
*/
memset(header, 0, 4); // when
header[EVENT_TYPE_OFFSET] = HEARTBEAT_LOG_EVENT;
char* p= coord->file_name + dirname_length(coord->file_name);
uint ident_len = strlen(p);
ulong event_len = ident_len + LOG_EVENT_HEADER_LEN +
(do_checksum ? BINLOG_CHECKSUM_LEN : 0);
int4store(header + SERVER_ID_OFFSET, server_id);
int4store(header + EVENT_LEN_OFFSET, event_len);
int2store(header + FLAGS_OFFSET, 0);
int4store(header + LOG_POS_OFFSET, coord->pos); // log_pos
packet->append(header, sizeof(header));
packet->append(p, ident_len); // log_file_name
if (do_checksum)
{
char b[BINLOG_CHECKSUM_LEN];
ha_checksum crc= my_checksum(0L, NULL, 0);
crc= my_checksum(crc, (uchar*) header, sizeof(header));
crc= my_checksum(crc, (uchar*) p, ident_len);
int4store(b, crc);
packet->append(b, sizeof(b));
}
if (my_net_write(net, (uchar*) packet->ptr(), packet->length()) ||
net_flush(net))
{
DBUG_RETURN(-1);
}
DBUG_RETURN(0);
}
/*
TODO: Clean up loop to only have one call to send_file()
*/
void mysql_binlog_send(THD* thd, char* log_ident, my_off_t pos,
ushort flags)
{
LOG_INFO linfo;
char *log_file_name = linfo.log_file_name;
char search_file_name[FN_REFLEN], *name;
ulong ev_offset;
IO_CACHE log;
File file = -1;
String* packet = &thd->packet;
int error;
const char *errmsg = "Unknown error";
const char *fmt= "%s; the last event was read from '%s' at %s, the last byte read was read from '%s' at %s.";
char llbuff1[22], llbuff2[22];
char error_text[MAX_SLAVE_ERRMSG]; // to be send to slave via my_message()
NET* net = &thd->net;
mysql_mutex_t *log_lock;
mysql_cond_t *log_cond;
bool binlog_can_be_corrupted= FALSE;
uint8 current_checksum_alg= BINLOG_CHECKSUM_ALG_UNDEF;
int old_max_allowed_packet= thd->variables.max_allowed_packet;
#ifndef DBUG_OFF
int left_events = max_binlog_dump_events;
#endif
DBUG_ENTER("mysql_binlog_send");
DBUG_PRINT("enter",("log_ident: '%s' pos: %ld", log_ident, (long) pos));
bzero((char*) &log,sizeof(log));
/*
heartbeat_period from @master_heartbeat_period user variable
*/
ulonglong heartbeat_period= get_heartbeat_period(thd);
struct timespec heartbeat_buf;
struct event_coordinates coord_buf;
struct timespec *heartbeat_ts= NULL;
struct event_coordinates *coord= NULL;
if (heartbeat_period != LL(0))
{
heartbeat_ts= &heartbeat_buf;
set_timespec_nsec(*heartbeat_ts, 0);
coord= &coord_buf;
coord->file_name= log_file_name; // initialization basing on what slave remembers
coord->pos= pos;
}
sql_print_information("Start binlog_dump to slave_server(%d), pos(%s, %lu)",
thd->server_id, log_ident, (ulong)pos);
if (RUN_HOOK(binlog_transmit, transmit_start, (thd, flags, log_ident, pos)))
{
errmsg= "Failed to run hook 'transmit_start'";
my_errno= ER_UNKNOWN_ERROR;
goto err;
}
#ifndef DBUG_OFF
if (opt_sporadic_binlog_dump_fail && (binlog_dump_count++ % 2))
{
errmsg = "Master failed COM_BINLOG_DUMP to test if slave can recover";
my_errno= ER_UNKNOWN_ERROR;
goto err;
}
#endif
if (!mysql_bin_log.is_open())
{
errmsg = "Binary log is not open";
my_errno= ER_MASTER_FATAL_ERROR_READING_BINLOG;
goto err;
}
if (!server_id_supplied)
{
errmsg = "Misconfigured master - server id was not set";
my_errno= ER_MASTER_FATAL_ERROR_READING_BINLOG;
goto err;
}
name=search_file_name;
if (log_ident[0])
mysql_bin_log.make_log_name(search_file_name, log_ident);
else
name=0; // Find first log
linfo.index_file_offset = 0;
if (mysql_bin_log.find_log_pos(&linfo, name, 1))
{
errmsg = "Could not find first log file name in binary log index file";
my_errno= ER_MASTER_FATAL_ERROR_READING_BINLOG;
goto err;
}
mysql_mutex_lock(&LOCK_thread_count);
thd->current_linfo = &linfo;
mysql_mutex_unlock(&LOCK_thread_count);
if ((file=open_binlog(&log, log_file_name, &errmsg)) < 0)
{
my_errno= ER_MASTER_FATAL_ERROR_READING_BINLOG;
goto err;
}
if (pos < BIN_LOG_HEADER_SIZE || pos > my_b_filelength(&log))
{
errmsg= "Client requested master to start replication from \
impossible position";
my_errno= ER_MASTER_FATAL_ERROR_READING_BINLOG;
goto err;
}
/* reset transmit packet for the fake rotate event below */
if (reset_transmit_packet(thd, flags, &ev_offset, &errmsg))
goto err;
/*
Tell the client about the log name with a fake Rotate event;
this is needed even if we also send a Format_description_log_event
just after, because that event does not contain the binlog's name.
Note that as this Rotate event is sent before
Format_description_log_event, the slave cannot have any info to
understand this event's format, so the header len of
Rotate_log_event is FROZEN (so in 5.0 it will have a header shorter
than other events except FORMAT_DESCRIPTION_EVENT).
Before 4.0.14 we called fake_rotate_event below only if (pos ==
BIN_LOG_HEADER_SIZE), because if this is false then the slave
already knows the binlog's name.
Since, we always call fake_rotate_event; if the slave already knew
the log's name (ex: CHANGE MASTER TO MASTER_LOG_FILE=...) this is
useless but does not harm much. It is nice for 3.23 (>=.58) slaves
which test Rotate events to see if the master is 4.0 (then they
choose to stop because they can't replicate 4.0); by always calling
fake_rotate_event we are sure that 3.23.58 and newer will detect the
problem as soon as replication starts (BUG#198).
Always calling fake_rotate_event makes sending of normal
(=from-binlog) Rotate events a priori unneeded, but it is not so
simple: the 2 Rotate events are not equivalent, the normal one is
before the Stop event, the fake one is after. If we don't send the
normal one, then the Stop event will be interpreted (by existing 4.0
slaves) as "the master stopped", which is wrong. So for safety,
given that we want minimum modification of 4.0, we send the normal
and fake Rotates.
*/
if (fake_rotate_event(net, packet, log_file_name, pos, &errmsg,
get_binlog_checksum_value_at_connect(thd)))
{
/*
This error code is not perfect, as fake_rotate_event() does not
read anything from the binlog; if it fails it's because of an
error in my_net_write(), fortunately it will say so in errmsg.
*/
my_errno= ER_MASTER_FATAL_ERROR_READING_BINLOG;
goto err;
}
/*
Adding MAX_LOG_EVENT_HEADER_LEN, since a binlog event can become
this larger than the corresponding packet (query) sent
from client to master.
*/
thd->variables.max_allowed_packet+= MAX_LOG_EVENT_HEADER;
/*
We can set log_lock now, it does not move (it's a member of
mysql_bin_log, and it's already inited, and it will be destroyed
only at shutdown).
*/
log_lock= mysql_bin_log.get_log_lock();
log_cond= mysql_bin_log.get_log_cond();
if (pos > BIN_LOG_HEADER_SIZE)
{
/* reset transmit packet for the event read from binary log
file */
if (reset_transmit_packet(thd, flags, &ev_offset, &errmsg))
goto err;
/*
Try to find a Format_description_log_event at the beginning of
the binlog
*/
if (!(error = Log_event::read_log_event(&log, packet, log_lock, 0)))
{
/*
The packet has offsets equal to the normal offsets in a
binlog event + ev_offset (the first ev_offset characters are
the header (default \0)).
*/
DBUG_PRINT("info",
("Looked for a Format_description_log_event, found event type %d",
(*packet)[EVENT_TYPE_OFFSET+ev_offset]));
if ((*packet)[EVENT_TYPE_OFFSET+ev_offset] == FORMAT_DESCRIPTION_EVENT)
{
current_checksum_alg= get_checksum_alg(packet->ptr() + ev_offset,
packet->length() - ev_offset);
DBUG_ASSERT(current_checksum_alg == BINLOG_CHECKSUM_ALG_OFF ||
current_checksum_alg == BINLOG_CHECKSUM_ALG_UNDEF ||
current_checksum_alg == BINLOG_CHECKSUM_ALG_CRC32);
if (!is_slave_checksum_aware(thd) &&
current_checksum_alg != BINLOG_CHECKSUM_ALG_OFF &&
current_checksum_alg != BINLOG_CHECKSUM_ALG_UNDEF)
{
my_errno= ER_MASTER_FATAL_ERROR_READING_BINLOG;
errmsg= "Slave can not handle replication events with the checksum "
"that master is configured to log";
sql_print_warning("Master is configured to log replication events "
"with checksum, but will not send such events to "
"slaves that cannot process them");
goto err;
}
binlog_can_be_corrupted= test((*packet)[FLAGS_OFFSET+ev_offset] &
LOG_EVENT_BINLOG_IN_USE_F);
(*packet)[FLAGS_OFFSET+ev_offset] &= ~LOG_EVENT_BINLOG_IN_USE_F;
/*
mark that this event with "log_pos=0", so the slave
should not increment master's binlog position
(rli->group_master_log_pos)
*/
int4store((char*) packet->ptr()+LOG_POS_OFFSET+ev_offset, 0);
/*
if reconnect master sends FD event with `created' as 0
to avoid destroying temp tables.
*/
int4store((char*) packet->ptr()+LOG_EVENT_MINIMAL_HEADER_LEN+
ST_CREATED_OFFSET+ev_offset, (ulong) 0);
/* fix the checksum due to latest changes in header */
if (current_checksum_alg != BINLOG_CHECKSUM_ALG_OFF &&
current_checksum_alg != BINLOG_CHECKSUM_ALG_UNDEF)
fix_checksum(packet, ev_offset);
/* send it */
if (my_net_write(net, (uchar*) packet->ptr(), packet->length()))
{
errmsg = "Failed on my_net_write()";
my_errno= ER_UNKNOWN_ERROR;
goto err;
}
/*
No need to save this event. We are only doing simple reads
(no real parsing of the events) so we don't need it. And so
we don't need the artificial Format_description_log_event of
3.23&4.x.
*/
}
}
else
{
if (test_for_non_eof_log_read_errors(error, &errmsg))
goto err;
/*
It's EOF, nothing to do, go on reading next events, the
Format_description_log_event will be found naturally if it is written.
*/
}
} /* end of if (pos > BIN_LOG_HEADER_SIZE); */
else
{
/* The Format_description_log_event event will be found naturally. */
}
/* seek to the requested position, to start the requested dump */
my_b_seek(&log, pos); // Seek will done on next read
while (!net->error && net->vio != 0 && !thd->killed)
{
Log_event_type event_type= UNKNOWN_EVENT;
/* reset the transmit packet for the event read from binary log
file */
if (reset_transmit_packet(thd, flags, &ev_offset, &errmsg))
goto err;
while (!(error = Log_event::read_log_event(&log, packet, log_lock,
current_checksum_alg)))
{
#ifndef DBUG_OFF
if (max_binlog_dump_events && !left_events--)
{
net_flush(net);
errmsg = "Debugging binlog dump abort";
my_errno= ER_UNKNOWN_ERROR;
goto err;
}
#endif
/*
log's filename does not change while it's active
*/
if (coord)
coord->pos= uint4korr(packet->ptr() + ev_offset + LOG_POS_OFFSET);
event_type=
(Log_event_type)((uchar)(*packet)[LOG_EVENT_OFFSET+ev_offset]);
DBUG_EXECUTE_IF("dump_thread_wait_before_send_xid",
{
if (event_type == XID_EVENT)
{
net_flush(net);
const char act[]=
"now "
"wait_for signal.continue";
DBUG_ASSERT(opt_debug_sync_timeout > 0);
DBUG_ASSERT(!debug_sync_set_action(thd,
STRING_WITH_LEN(act)));
const char act2[]=
"now "
"signal signal.continued";
DBUG_ASSERT(!debug_sync_set_action(current_thd,
STRING_WITH_LEN(act2)));
}
});
if (event_type == FORMAT_DESCRIPTION_EVENT)
{
current_checksum_alg= get_checksum_alg(packet->ptr() + ev_offset,
packet->length() - ev_offset);
DBUG_ASSERT(current_checksum_alg == BINLOG_CHECKSUM_ALG_OFF ||
current_checksum_alg == BINLOG_CHECKSUM_ALG_UNDEF ||
current_checksum_alg == BINLOG_CHECKSUM_ALG_CRC32);
if (!is_slave_checksum_aware(thd) &&
current_checksum_alg != BINLOG_CHECKSUM_ALG_OFF &&
current_checksum_alg != BINLOG_CHECKSUM_ALG_UNDEF)
{
my_errno= ER_MASTER_FATAL_ERROR_READING_BINLOG;
errmsg= "Slave can not handle replication events with the checksum "
"that master is configured to log";
sql_print_warning("Master is configured to log replication events "
"with checksum, but will not send such events to "
"slaves that cannot process them");
goto err;
}
binlog_can_be_corrupted= test((*packet)[FLAGS_OFFSET+ev_offset] &
LOG_EVENT_BINLOG_IN_USE_F);
(*packet)[FLAGS_OFFSET+ev_offset] &= ~LOG_EVENT_BINLOG_IN_USE_F;
}
else if (event_type == STOP_EVENT)
binlog_can_be_corrupted= FALSE;
if (event_type != ANNOTATE_ROWS_EVENT ||
(flags & BINLOG_SEND_ANNOTATE_ROWS_EVENT))
{
pos = my_b_tell(&log);
if (RUN_HOOK(binlog_transmit, before_send_event,
(thd, flags, packet, log_file_name, pos)))
{
my_errno= ER_UNKNOWN_ERROR;
errmsg= "run 'before_send_event' hook failed";
goto err;
}
if (my_net_write(net, (uchar*) packet->ptr(), packet->length()))
{
errmsg = "Failed on my_net_write()";
my_errno= ER_UNKNOWN_ERROR;
goto err;
}
DBUG_EXECUTE_IF("dump_thread_wait_before_send_xid",
{
if (event_type == XID_EVENT)
{
net_flush(net);
}
});
DBUG_PRINT("info", ("log event code %d", event_type));
if (event_type == LOAD_EVENT)
{
if (send_file(thd))
{
errmsg = "failed in send_file()";
my_errno= ER_UNKNOWN_ERROR;
goto err;
}
}
if (RUN_HOOK(binlog_transmit, after_send_event, (thd, flags, packet)))
{
errmsg= "Failed to run hook 'after_send_event'";
my_errno= ER_UNKNOWN_ERROR;
goto err;
}
}
/* reset transmit packet for next loop */
if (reset_transmit_packet(thd, flags, &ev_offset, &errmsg))
goto err;
}
/*
TODO: now that we are logging the offset, check to make sure
the recorded offset and the actual match.
Guilhem 2003-06: this is not true if this master is a slave
<4.0.15 running with --log-slave-updates, because then log_pos may
be the offset in the-master-of-this-master's binlog.
*/
if (test_for_non_eof_log_read_errors(error, &errmsg))
goto err;
if (!(flags & BINLOG_DUMP_NON_BLOCK) &&
mysql_bin_log.is_active(log_file_name))
{
/*
Block until there is more data in the log
*/
if (net_flush(net))
{
errmsg = "failed on net_flush()";
my_errno= ER_UNKNOWN_ERROR;
goto err;
}
/*
We may have missed the update broadcast from the log
that has just happened, let's try to catch it if it did.
If we did not miss anything, we just wait for other threads
to signal us.
*/
{
log.error=0;
bool read_packet = 0;
#ifndef DBUG_OFF
if (max_binlog_dump_events && !left_events--)
{
errmsg = "Debugging binlog dump abort";
my_errno= ER_UNKNOWN_ERROR;
goto err;
}
#endif
/* reset the transmit packet for the event read from binary log
file */
if (reset_transmit_packet(thd, flags, &ev_offset, &errmsg))
goto err;
/*
No one will update the log while we are reading
now, but we'll be quick and just read one record
TODO:
Add an counter that is incremented for each time we update the
binary log. We can avoid the following read if the counter
has not been updated since last read.
*/
mysql_mutex_lock(log_lock);
switch (error= Log_event::read_log_event(&log, packet, (mysql_mutex_t*) 0,
current_checksum_alg)) {
case 0:
/* we read successfully, so we'll need to send it to the slave */
mysql_mutex_unlock(log_lock);
read_packet = 1;
if (coord)
coord->pos= uint4korr(packet->ptr() + ev_offset + LOG_POS_OFFSET);
event_type=
(Log_event_type)((uchar)(*packet)[LOG_EVENT_OFFSET+ev_offset]);
break;
case LOG_READ_EOF:
{
int ret;
ulong signal_cnt;
DBUG_PRINT("wait",("waiting for data in binary log"));
if (thd->server_id==0) // for mysqlbinlog (mysqlbinlog.server_id==0)
{
mysql_mutex_unlock(log_lock);
goto end;
}
#ifndef DBUG_OFF
ulong hb_info_counter= 0;
#endif
const char* old_msg= thd->proc_info;
signal_cnt= mysql_bin_log.signal_cnt;
do
{
if (coord)
{
DBUG_ASSERT(heartbeat_ts && heartbeat_period != 0);
set_timespec_nsec(*heartbeat_ts, heartbeat_period);
}
thd->enter_cond(log_cond, log_lock,
"Master has sent all binlog to slave; "
"waiting for binlog to be updated");
ret= mysql_bin_log.wait_for_update_bin_log(thd, heartbeat_ts);
DBUG_ASSERT(ret == 0 || (heartbeat_period != 0 && coord != NULL));
if (ret == ETIMEDOUT || ret == ETIME)
{
#ifndef DBUG_OFF
if (hb_info_counter < 3)
{
sql_print_information("master sends heartbeat message");
hb_info_counter++;
if (hb_info_counter == 3)
sql_print_information("the rest of heartbeat info skipped ...");
}
#endif
/* reset transmit packet for the heartbeat event */
if (reset_transmit_packet(thd, flags, &ev_offset, &errmsg))
{
thd->exit_cond(old_msg);
goto err;
}
if (send_heartbeat_event(net, packet, coord, current_checksum_alg))
{
errmsg = "Failed on my_net_write()";
my_errno= ER_UNKNOWN_ERROR;
thd->exit_cond(old_msg);
goto err;
}
}
else
{
DBUG_PRINT("wait",("binary log received update or a broadcast signal caught"));
}
} while (signal_cnt == mysql_bin_log.signal_cnt && !thd->killed);
thd->exit_cond(old_msg);
}
break;
default:
mysql_mutex_unlock(log_lock);
test_for_non_eof_log_read_errors(error, &errmsg);
goto err;
}
if (read_packet &&
(event_type != ANNOTATE_ROWS_EVENT ||
(flags & BINLOG_SEND_ANNOTATE_ROWS_EVENT)))
{
thd_proc_info(thd, "Sending binlog event to slave");
pos = my_b_tell(&log);
if (RUN_HOOK(binlog_transmit, before_send_event,
(thd, flags, packet, log_file_name, pos)))
{
my_errno= ER_UNKNOWN_ERROR;
errmsg= "run 'before_send_event' hook failed";
goto err;
}
if (my_net_write(net, (uchar*) packet->ptr(), packet->length()) )
{
errmsg = "Failed on my_net_write()";
my_errno= ER_UNKNOWN_ERROR;
goto err;
}
if (event_type == LOAD_EVENT)
{
if (send_file(thd))
{
errmsg = "failed in send_file()";
my_errno= ER_UNKNOWN_ERROR;
goto err;
}
}
if (RUN_HOOK(binlog_transmit, after_send_event, (thd, flags, packet)))
{
my_errno= ER_UNKNOWN_ERROR;
errmsg= "Failed to run hook 'after_send_event'";
goto err;
}
}
log.error=0;
}
}
else
{
bool loop_breaker = 0;
/* need this to break out of the for loop from switch */
thd_proc_info(thd, "Finished reading one binlog; switching to next binlog");
switch (mysql_bin_log.find_next_log(&linfo, 1)) {
case 0:
break;
case LOG_INFO_EOF:
if (mysql_bin_log.is_active(log_file_name))
{
loop_breaker = (flags & BINLOG_DUMP_NON_BLOCK);
break;
}
default:
errmsg = "could not find next log";
my_errno= ER_MASTER_FATAL_ERROR_READING_BINLOG;
goto err;
}
if (loop_breaker)
break;
end_io_cache(&log);
mysql_file_close(file, MYF(MY_WME));
/* reset transmit packet for the possible fake rotate event */
if (reset_transmit_packet(thd, flags, &ev_offset, &errmsg))
goto err;
/*
Call fake_rotate_event() in case the previous log (the one which
we have just finished reading) did not contain a Rotate event
(for example (I don't know any other example) the previous log
was the last one before the master was shutdown & restarted).
This way we tell the slave about the new log's name and
position. If the binlog is 5.0, the next event we are going to
read and send is Format_description_log_event.
*/
if ((file=open_binlog(&log, log_file_name, &errmsg)) < 0 ||
fake_rotate_event(net, packet, log_file_name, BIN_LOG_HEADER_SIZE,
&errmsg, current_checksum_alg))
{
my_errno= ER_MASTER_FATAL_ERROR_READING_BINLOG;
goto err;
}
if (coord)
coord->file_name= log_file_name; // reset to the next
}
}
end:
end_io_cache(&log);
mysql_file_close(file, MYF(MY_WME));
RUN_HOOK(binlog_transmit, transmit_stop, (thd, flags));
my_eof(thd);
thd_proc_info(thd, "Waiting to finalize termination");
mysql_mutex_lock(&LOCK_thread_count);
thd->current_linfo = 0;
mysql_mutex_unlock(&LOCK_thread_count);
thd->variables.max_allowed_packet= old_max_allowed_packet;
DBUG_VOID_RETURN;
err:
thd_proc_info(thd, "Waiting to finalize termination");
if (my_errno == ER_MASTER_FATAL_ERROR_READING_BINLOG && my_b_inited(&log))
{
/*
detailing the fatal error message with coordinates
of the last position read.
*/
char b_start[FN_REFLEN], b_end[FN_REFLEN];
fn_format(b_start, coord->file_name, "", "", MY_REPLACE_DIR);
fn_format(b_end, log_file_name, "", "", MY_REPLACE_DIR);
my_snprintf(error_text, sizeof(error_text), fmt, errmsg,
b_start, (llstr(coord->pos, llbuff1), llbuff1),
b_end, (llstr(my_b_tell(&log), llbuff2), llbuff2));
}
else
strcpy(error_text, errmsg);
end_io_cache(&log);
RUN_HOOK(binlog_transmit, transmit_stop, (thd, flags));
/*
Exclude iteration through thread list
this is needed for purge_logs() - it will iterate through
thread list and update thd->current_linfo->index_file_offset
this mutex will make sure that it never tried to update our linfo
after we return from this stack frame
*/
mysql_mutex_lock(&LOCK_thread_count);
thd->current_linfo = 0;
mysql_mutex_unlock(&LOCK_thread_count);
if (file >= 0)
mysql_file_close(file, MYF(MY_WME));
thd->variables.max_allowed_packet= old_max_allowed_packet;
my_message(my_errno, error_text, MYF(0));
DBUG_VOID_RETURN;
}
/**
Execute a START SLAVE statement.
@param thd Pointer to THD object for the client thread executing the
statement.
@param mi Pointer to Master_info object for the slave's IO thread.
@param net_report If true, saves the exit status into thd->stmt_da.
@retval 0 success
@retval 1 error
*/
int start_slave(THD* thd , Master_info* mi, bool net_report)
{
int slave_errno= 0;
int thread_mask;
DBUG_ENTER("start_slave");
if (check_access(thd, SUPER_ACL, any_db, NULL, NULL, 0, 0))
DBUG_RETURN(1);
lock_slave_threads(mi); // this allows us to cleanly read slave_running
// Get a mask of _stopped_ threads
init_thread_mask(&thread_mask,mi,1 /* inverse */);
/*
Below we will start all stopped threads. But if the user wants to
start only one thread, do as if the other thread was running (as we
don't wan't to touch the other thread), so set the bit to 0 for the
other thread
*/
if (thd->lex->slave_thd_opt)
thread_mask&= thd->lex->slave_thd_opt;
if (thread_mask) //some threads are stopped, start them
{
if (init_master_info(mi,master_info_file,relay_log_info_file, 0,
thread_mask))
slave_errno=ER_MASTER_INFO;
else if (server_id_supplied && *mi->host)
{
/*
If we will start SQL thread we will care about UNTIL options If
not and they are specified we will ignore them and warn user
about this fact.
*/
if (thread_mask & SLAVE_SQL)
{
mysql_mutex_lock(&mi->rli.data_lock);
if (thd->lex->mi.pos)
{
mi->rli.until_condition= Relay_log_info::UNTIL_MASTER_POS;
mi->rli.until_log_pos= thd->lex->mi.pos;
/*
We don't check thd->lex->mi.log_file_name for NULL here
since it is checked in sql_yacc.yy
*/
strmake(mi->rli.until_log_name, thd->lex->mi.log_file_name,
sizeof(mi->rli.until_log_name)-1);
}
else if (thd->lex->mi.relay_log_pos)
{
mi->rli.until_condition= Relay_log_info::UNTIL_RELAY_POS;
mi->rli.until_log_pos= thd->lex->mi.relay_log_pos;
strmake(mi->rli.until_log_name, thd->lex->mi.relay_log_name,
sizeof(mi->rli.until_log_name)-1);
}
else
mi->rli.clear_until_condition();
if (mi->rli.until_condition != Relay_log_info::UNTIL_NONE)
{
/* Preparing members for effective until condition checking */
const char *p= fn_ext(mi->rli.until_log_name);
char *p_end;
if (*p)
{
//p points to '.'
mi->rli.until_log_name_extension= strtoul(++p,&p_end, 10);
/*
p_end points to the first invalid character. If it equals
to p, no digits were found, error. If it contains '\0' it
means conversion went ok.
*/
if (p_end==p || *p_end)
slave_errno=ER_BAD_SLAVE_UNTIL_COND;
}
else
slave_errno=ER_BAD_SLAVE_UNTIL_COND;
/* mark the cached result of the UNTIL comparison as "undefined" */
mi->rli.until_log_names_cmp_result=
Relay_log_info::UNTIL_LOG_NAMES_CMP_UNKNOWN;
/* Issuing warning then started without --skip-slave-start */
if (!opt_skip_slave_start)
push_warning(thd, MYSQL_ERROR::WARN_LEVEL_NOTE,
ER_MISSING_SKIP_SLAVE,
ER(ER_MISSING_SKIP_SLAVE));
}
mysql_mutex_unlock(&mi->rli.data_lock);
}
else if (thd->lex->mi.pos || thd->lex->mi.relay_log_pos)
push_warning(thd, MYSQL_ERROR::WARN_LEVEL_NOTE, ER_UNTIL_COND_IGNORED,
ER(ER_UNTIL_COND_IGNORED));
if (!slave_errno)
slave_errno = start_slave_threads(0 /*no mutex */,
1 /* wait for start */,
mi,
master_info_file,relay_log_info_file,
thread_mask);
}
else
slave_errno = ER_BAD_SLAVE;
}
else
{
/* no error if all threads are already started, only a warning */
push_warning(thd, MYSQL_ERROR::WARN_LEVEL_NOTE, ER_SLAVE_WAS_RUNNING,
ER(ER_SLAVE_WAS_RUNNING));
}
unlock_slave_threads(mi);
if (slave_errno)
{
if (net_report)
my_message(slave_errno, ER(slave_errno), MYF(0));
DBUG_RETURN(1);
}
else if (net_report)
my_ok(thd);
DBUG_RETURN(0);
}
/**
Execute a STOP SLAVE statement.
@param thd Pointer to THD object for the client thread executing the
statement.
@param mi Pointer to Master_info object for the slave's IO thread.
@param net_report If true, saves the exit status into thd->stmt_da.
@retval 0 success
@retval 1 error
*/
int stop_slave(THD* thd, Master_info* mi, bool net_report )
{
DBUG_ENTER("stop_slave");
int slave_errno;
if (!thd)
thd = current_thd;
if (check_access(thd, SUPER_ACL, any_db, NULL, NULL, 0, 0))
DBUG_RETURN(1);
thd_proc_info(thd, "Killing slave");
int thread_mask;
lock_slave_threads(mi);
// Get a mask of _running_ threads
init_thread_mask(&thread_mask,mi,0 /* not inverse*/);
/*
Below we will stop all running threads.
But if the user wants to stop only one thread, do as if the other thread
was stopped (as we don't wan't to touch the other thread), so set the
bit to 0 for the other thread
*/
if (thd->lex->slave_thd_opt)
thread_mask &= thd->lex->slave_thd_opt;
if (thread_mask)
{
slave_errno= terminate_slave_threads(mi,thread_mask,
1 /*skip lock */);
}
else
{
//no error if both threads are already stopped, only a warning
slave_errno= 0;
push_warning(thd, MYSQL_ERROR::WARN_LEVEL_NOTE, ER_SLAVE_WAS_NOT_RUNNING,
ER(ER_SLAVE_WAS_NOT_RUNNING));
}
unlock_slave_threads(mi);
thd_proc_info(thd, 0);
if (slave_errno)
{
if (net_report)
my_message(slave_errno, ER(slave_errno), MYF(0));
DBUG_RETURN(1);
}
else if (net_report)
my_ok(thd);
DBUG_RETURN(0);
}
/**
Execute a RESET SLAVE statement.
@param thd Pointer to THD object of the client thread executing the
statement.
@param mi Pointer to Master_info object for the slave.
@retval 0 success
@retval 1 error
*/
int reset_slave(THD *thd, Master_info* mi)
{
MY_STAT stat_area;
char fname[FN_REFLEN];
int thread_mask= 0, error= 0;
uint sql_errno=ER_UNKNOWN_ERROR;
const char* errmsg= "Unknown error occured while reseting slave";
DBUG_ENTER("reset_slave");
lock_slave_threads(mi);
init_thread_mask(&thread_mask,mi,0 /* not inverse */);
if (thread_mask) // We refuse if any slave thread is running
{
sql_errno= ER_SLAVE_MUST_STOP;
error=1;
goto err;
}
ha_reset_slave(thd);
// delete relay logs, clear relay log coordinates
if ((error= purge_relay_logs(&mi->rli, thd,
1 /* just reset */,
&errmsg)))
{
sql_errno= ER_RELAY_LOG_FAIL;
goto err;
}
/* Clear master's log coordinates and associated information */
mi->clear_in_memory_info(thd->lex->reset_slave_info.all);
/*
Reset errors (the idea is that we forget about the
old master).
*/
mi->clear_error();
mi->rli.clear_error();
mi->rli.clear_until_condition();
// close master_info_file, relay_log_info_file, set mi->inited=rli->inited=0
end_master_info(mi);
// and delete these two files
fn_format(fname, master_info_file, mysql_data_home, "", 4+32);
if (mysql_file_stat(key_file_master_info, fname, &stat_area, MYF(0)) &&
mysql_file_delete(key_file_master_info, fname, MYF(MY_WME)))
{
error=1;
goto err;
}
// delete relay_log_info_file
fn_format(fname, relay_log_info_file, mysql_data_home, "", 4+32);
if (mysql_file_stat(key_file_relay_log_info, fname, &stat_area, MYF(0)) &&
mysql_file_delete(key_file_relay_log_info, fname, MYF(MY_WME)))
{
error=1;
goto err;
}
RUN_HOOK(binlog_relay_io, after_reset_slave, (thd, mi));
err:
unlock_slave_threads(mi);
if (error)
my_error(sql_errno, MYF(0), errmsg);
DBUG_RETURN(error);
}
/*
Kill all Binlog_dump threads which previously talked to the same slave
("same" means with the same server id). Indeed, if the slave stops, if the
Binlog_dump thread is waiting (mysql_cond_wait) for binlog update, then it
will keep existing until a query is written to the binlog. If the master is
idle, then this could last long, and if the slave reconnects, we could have 2
Binlog_dump threads in SHOW PROCESSLIST, until a query is written to the
binlog. To avoid this, when the slave reconnects and sends COM_BINLOG_DUMP,
the master kills any existing thread with the slave's server id (if this id
is not zero; it will be true for real slaves, but false for mysqlbinlog when
it sends COM_BINLOG_DUMP to get a remote binlog dump).
SYNOPSIS
kill_zombie_dump_threads()
slave_server_id the slave's server id
*/
void kill_zombie_dump_threads(uint32 slave_server_id)
{
mysql_mutex_lock(&LOCK_thread_count);
I_List_iterator<THD> it(threads);
THD *tmp;
while ((tmp=it++))
{
if (tmp->command == COM_BINLOG_DUMP &&
tmp->server_id == slave_server_id)
{
mysql_mutex_lock(&tmp->LOCK_thd_data); // Lock from delete
break;
}
}
mysql_mutex_unlock(&LOCK_thread_count);
if (tmp)
{
/*
Here we do not call kill_one_thread() as
it will be slow because it will iterate through the list
again. We just to do kill the thread ourselves.
*/
tmp->awake(KILL_QUERY);
mysql_mutex_unlock(&tmp->LOCK_thd_data);
}
}
/**
Execute a CHANGE MASTER statement.
@param thd Pointer to THD object for the client thread executing the
statement.
@param mi Pointer to Master_info object belonging to the slave's IO
thread.
@retval FALSE success
@retval TRUE error
*/
bool change_master(THD* thd, Master_info* mi)
{
int thread_mask;
const char* errmsg= 0;
bool need_relay_log_purge= 1;
bool ret= FALSE;
char saved_host[HOSTNAME_LENGTH + 1];
uint saved_port;
char saved_log_name[FN_REFLEN];
my_off_t saved_log_pos;
DBUG_ENTER("change_master");
lock_slave_threads(mi);
init_thread_mask(&thread_mask,mi,0 /*not inverse*/);
LEX_MASTER_INFO* lex_mi= &thd->lex->mi;
if (thread_mask) // We refuse if any slave thread is running
{
my_message(ER_SLAVE_MUST_STOP, ER(ER_SLAVE_MUST_STOP), MYF(0));
ret= TRUE;
goto err;
}
thd_proc_info(thd, "Changing master");
/*
We need to check if there is an empty master_host. Otherwise
change master succeeds, a master.info file is created containing
empty master_host string and when issuing: start slave; an error
is thrown stating that the server is not configured as slave.
(See BUG#28796).
*/
if(lex_mi->host && !*lex_mi->host)
{
my_error(ER_WRONG_ARGUMENTS, MYF(0), "MASTER_HOST");
unlock_slave_threads(mi);
DBUG_RETURN(TRUE);
}
// TODO: see if needs re-write
if (init_master_info(mi, master_info_file, relay_log_info_file, 0,
thread_mask))
{
my_message(ER_MASTER_INFO, ER(ER_MASTER_INFO), MYF(0));
ret= TRUE;
goto err;
}
/*
Data lock not needed since we have already stopped the running threads,
and we have the hold on the run locks which will keep all threads that
could possibly modify the data structures from running
*/
/*
Before processing the command, save the previous state.
*/
strmake(saved_host, mi->host, HOSTNAME_LENGTH);
saved_port= mi->port;
strmake(saved_log_name, mi->master_log_name, FN_REFLEN - 1);
saved_log_pos= mi->master_log_pos;
/*
If the user specified host or port without binlog or position,
reset binlog's name to FIRST and position to 4.
*/
if ((lex_mi->host || lex_mi->port) && !lex_mi->log_file_name && !lex_mi->pos)
{
mi->master_log_name[0] = 0;
mi->master_log_pos= BIN_LOG_HEADER_SIZE;
}
if (lex_mi->log_file_name)
strmake(mi->master_log_name, lex_mi->log_file_name,
sizeof(mi->master_log_name)-1);
if (lex_mi->pos)
{
mi->master_log_pos= lex_mi->pos;
}
DBUG_PRINT("info", ("master_log_pos: %lu", (ulong) mi->master_log_pos));
if (lex_mi->host)
strmake(mi->host, lex_mi->host, sizeof(mi->host)-1);
if (lex_mi->user)
strmake(mi->user, lex_mi->user, sizeof(mi->user)-1);
if (lex_mi->password)
strmake(mi->password, lex_mi->password, sizeof(mi->password)-1);
if (lex_mi->port)
mi->port = lex_mi->port;
if (lex_mi->connect_retry)
mi->connect_retry = lex_mi->connect_retry;
if (lex_mi->heartbeat_opt != LEX_MASTER_INFO::LEX_MI_UNCHANGED)
mi->heartbeat_period = lex_mi->heartbeat_period;
else
mi->heartbeat_period= (float) min(SLAVE_MAX_HEARTBEAT_PERIOD,
(slave_net_timeout/2.0));
mi->received_heartbeats= LL(0); // counter lives until master is CHANGEd
/*
reset the last time server_id list if the current CHANGE MASTER
is mentioning IGNORE_SERVER_IDS= (...)
*/
if (lex_mi->repl_ignore_server_ids_opt == LEX_MASTER_INFO::LEX_MI_ENABLE)
reset_dynamic(&mi->ignore_server_ids);
for (uint i= 0; i < lex_mi->repl_ignore_server_ids.elements; i++)
{
ulong s_id;
get_dynamic(&lex_mi->repl_ignore_server_ids, (uchar*) &s_id, i);
if (s_id == ::server_id && replicate_same_server_id)
{
my_error(ER_SLAVE_IGNORE_SERVER_IDS, MYF(0), static_cast<int>(s_id));
ret= TRUE;
goto err;
}
else
{
if (bsearch((const ulong *) &s_id,
mi->ignore_server_ids.buffer,
mi->ignore_server_ids.elements, sizeof(ulong),
(int (*) (const void*, const void*))
change_master_server_id_cmp) == NULL)
insert_dynamic(&mi->ignore_server_ids, (uchar*) &s_id);
}
}
sort_dynamic(&mi->ignore_server_ids, (qsort_cmp) change_master_server_id_cmp);
if (lex_mi->ssl != LEX_MASTER_INFO::LEX_MI_UNCHANGED)
mi->ssl= (lex_mi->ssl == LEX_MASTER_INFO::LEX_MI_ENABLE);
if (lex_mi->ssl_verify_server_cert != LEX_MASTER_INFO::LEX_MI_UNCHANGED)
mi->ssl_verify_server_cert=
(lex_mi->ssl_verify_server_cert == LEX_MASTER_INFO::LEX_MI_ENABLE);
if (lex_mi->ssl_ca)
strmake(mi->ssl_ca, lex_mi->ssl_ca, sizeof(mi->ssl_ca)-1);
if (lex_mi->ssl_capath)
strmake(mi->ssl_capath, lex_mi->ssl_capath, sizeof(mi->ssl_capath)-1);
if (lex_mi->ssl_cert)
strmake(mi->ssl_cert, lex_mi->ssl_cert, sizeof(mi->ssl_cert)-1);
if (lex_mi->ssl_cipher)
strmake(mi->ssl_cipher, lex_mi->ssl_cipher, sizeof(mi->ssl_cipher)-1);
if (lex_mi->ssl_key)
strmake(mi->ssl_key, lex_mi->ssl_key, sizeof(mi->ssl_key)-1);
#ifndef HAVE_OPENSSL
if (lex_mi->ssl || lex_mi->ssl_ca || lex_mi->ssl_capath ||
lex_mi->ssl_cert || lex_mi->ssl_cipher || lex_mi->ssl_key ||
lex_mi->ssl_verify_server_cert )
push_warning(thd, MYSQL_ERROR::WARN_LEVEL_NOTE,
ER_SLAVE_IGNORED_SSL_PARAMS, ER(ER_SLAVE_IGNORED_SSL_PARAMS));
#endif
if (lex_mi->relay_log_name)
{
need_relay_log_purge= 0;
char relay_log_name[FN_REFLEN];
mi->rli.relay_log.make_log_name(relay_log_name, lex_mi->relay_log_name);
strmake(mi->rli.group_relay_log_name, relay_log_name,
sizeof(mi->rli.group_relay_log_name)-1);
strmake(mi->rli.event_relay_log_name, relay_log_name,
sizeof(mi->rli.event_relay_log_name)-1);
}
if (lex_mi->relay_log_pos)
{
need_relay_log_purge= 0;
mi->rli.group_relay_log_pos= mi->rli.event_relay_log_pos= lex_mi->relay_log_pos;
}
/*
If user did specify neither host nor port nor any log name nor any log
pos, i.e. he specified only user/password/master_connect_retry, he probably
wants replication to resume from where it had left, i.e. from the
coordinates of the **SQL** thread (imagine the case where the I/O is ahead
of the SQL; restarting from the coordinates of the I/O would lose some
events which is probably unwanted when you are just doing minor changes
like changing master_connect_retry).
A side-effect is that if only the I/O thread was started, this thread may
restart from ''/4 after the CHANGE MASTER. That's a minor problem (it is a
much more unlikely situation than the one we are fixing here).
Note: coordinates of the SQL thread must be read here, before the
'if (need_relay_log_purge)' block which resets them.
*/
if (!lex_mi->host && !lex_mi->port &&
!lex_mi->log_file_name && !lex_mi->pos &&
need_relay_log_purge)
{
/*
Sometimes mi->rli.master_log_pos == 0 (it happens when the SQL thread is
not initialized), so we use a max().
What happens to mi->rli.master_log_pos during the initialization stages
of replication is not 100% clear, so we guard against problems using
max().
*/
mi->master_log_pos = max(BIN_LOG_HEADER_SIZE,
mi->rli.group_master_log_pos);
strmake(mi->master_log_name, mi->rli.group_master_log_name,
sizeof(mi->master_log_name)-1);
}
/*
Relay log's IO_CACHE may not be inited, if rli->inited==0 (server was never
a slave before).
*/
if (flush_master_info(mi, FALSE, FALSE))
{
my_error(ER_RELAY_LOG_INIT, MYF(0), "Failed to flush master info file");
ret= TRUE;
goto err;
}
if (need_relay_log_purge)
{
relay_log_purge= 1;
thd_proc_info(thd, "Purging old relay logs");
if (purge_relay_logs(&mi->rli, thd,
0 /* not only reset, but also reinit */,
&errmsg))
{
my_error(ER_RELAY_LOG_FAIL, MYF(0), errmsg);
ret= TRUE;
goto err;
}
}
else
{
const char* msg;
relay_log_purge= 0;
/* Relay log is already initialized */
if (init_relay_log_pos(&mi->rli,
mi->rli.group_relay_log_name,
mi->rli.group_relay_log_pos,
0 /*no data lock*/,
&msg, 0))
{
my_error(ER_RELAY_LOG_INIT, MYF(0), msg);
ret= TRUE;
goto err;
}
}
/*
Coordinates in rli were spoilt by the 'if (need_relay_log_purge)' block,
so restore them to good values. If we left them to ''/0, that would work;
but that would fail in the case of 2 successive CHANGE MASTER (without a
START SLAVE in between): because first one would set the coords in mi to
the good values of those in rli, the set those in rli to ''/0, then
second CHANGE MASTER would set the coords in mi to those of rli, i.e. to
''/0: we have lost all copies of the original good coordinates.
That's why we always save good coords in rli.
*/
mi->rli.group_master_log_pos= mi->master_log_pos;
DBUG_PRINT("info", ("master_log_pos: %lu", (ulong) mi->master_log_pos));
strmake(mi->rli.group_master_log_name,mi->master_log_name,
sizeof(mi->rli.group_master_log_name)-1);
if (!mi->rli.group_master_log_name[0]) // uninitialized case
mi->rli.group_master_log_pos=0;
mysql_mutex_lock(&mi->rli.data_lock);
mi->rli.abort_pos_wait++; /* for MASTER_POS_WAIT() to abort */
/* Clear the errors, for a clean start */
mi->rli.clear_error();
mi->rli.clear_until_condition();
sql_print_information("'CHANGE MASTER TO executed'. "
"Previous state master_host='%s', master_port='%u', master_log_file='%s', "
"master_log_pos='%ld'. "
"New state master_host='%s', master_port='%u', master_log_file='%s', "
"master_log_pos='%ld'.", saved_host, saved_port, saved_log_name,
(ulong) saved_log_pos, mi->host, mi->port, mi->master_log_name,
(ulong) mi->master_log_pos);
/*
If we don't write new coordinates to disk now, then old will remain in
relay-log.info until START SLAVE is issued; but if mysqld is shutdown
before START SLAVE, then old will remain in relay-log.info, and will be the
in-memory value at restart (thus causing errors, as the old relay log does
not exist anymore).
*/
flush_relay_log_info(&mi->rli);
mysql_cond_broadcast(&mi->data_cond);
mysql_mutex_unlock(&mi->rli.data_lock);
err:
unlock_slave_threads(mi);
thd_proc_info(thd, 0);
if (ret == FALSE)
my_ok(thd);
DBUG_RETURN(ret);
}
/**
Execute a RESET MASTER statement.
@param thd Pointer to THD object of the client thread executing the
statement.
@retval 0 success
@retval 1 error
*/
int reset_master(THD* thd)
{
if (!mysql_bin_log.is_open())
{
my_message(ER_FLUSH_MASTER_BINLOG_CLOSED,
ER(ER_FLUSH_MASTER_BINLOG_CLOSED), MYF(ME_BELL+ME_WAITTANG));
return 1;
}
if (mysql_bin_log.reset_logs(thd))
return 1;
RUN_HOOK(binlog_transmit, after_reset_master, (thd, 0 /* flags */));
return 0;
}
/**
Execute a SHOW BINLOG EVENTS statement.
@param thd Pointer to THD object for the client thread executing the
statement.
@retval FALSE success
@retval TRUE failure
*/
bool mysql_show_binlog_events(THD* thd)
{
Protocol *protocol= thd->protocol;
List<Item> field_list;
const char *errmsg = 0;
bool ret = TRUE;
IO_CACHE log;
File file = -1;
MYSQL_BIN_LOG *binary_log= NULL;
int old_max_allowed_packet= thd->variables.max_allowed_packet;
DBUG_ENTER("mysql_show_binlog_events");
Log_event::init_show_field_list(&field_list);
if (protocol->send_result_set_metadata(&field_list,
Protocol::SEND_NUM_ROWS | Protocol::SEND_EOF))
DBUG_RETURN(TRUE);
Format_description_log_event *description_event= new
Format_description_log_event(3); /* MySQL 4.0 by default */
DBUG_ASSERT(thd->lex->sql_command == SQLCOM_SHOW_BINLOG_EVENTS ||
thd->lex->sql_command == SQLCOM_SHOW_RELAYLOG_EVENTS);
/* select wich binary log to use: binlog or relay */
if ( thd->lex->sql_command == SQLCOM_SHOW_BINLOG_EVENTS )
{
/*
Wait for handlers to insert any pending information
into the binlog. For e.g. ndb which updates the binlog asynchronously
this is needed so that the uses sees all its own commands in the binlog
*/
ha_binlog_wait(thd);
binary_log= &mysql_bin_log;
}
else /* showing relay log contents */
{
if (!active_mi)
DBUG_RETURN(TRUE);
binary_log= &(active_mi->rli.relay_log);
}
if (binary_log->is_open())
{
LEX_MASTER_INFO *lex_mi= &thd->lex->mi;
SELECT_LEX_UNIT *unit= &thd->lex->unit;
ha_rows event_count, limit_start, limit_end;
my_off_t pos = max(BIN_LOG_HEADER_SIZE, lex_mi->pos); // user-friendly
char search_file_name[FN_REFLEN], *name;
const char *log_file_name = lex_mi->log_file_name;
mysql_mutex_t *log_lock = binary_log->get_log_lock();
LOG_INFO linfo;
Log_event* ev;
unit->set_limit(thd->lex->current_select);
limit_start= unit->offset_limit_cnt;
limit_end= unit->select_limit_cnt;
name= search_file_name;
if (log_file_name)
binary_log->make_log_name(search_file_name, log_file_name);
else
name=0; // Find first log
linfo.index_file_offset = 0;
if (binary_log->find_log_pos(&linfo, name, 1))
{
errmsg = "Could not find target log";
goto err;
}
mysql_mutex_lock(&LOCK_thread_count);
thd->current_linfo = &linfo;
mysql_mutex_unlock(&LOCK_thread_count);
if ((file=open_binlog(&log, linfo.log_file_name, &errmsg)) < 0)
goto err;
/*
to account binlog event header size
*/
thd->variables.max_allowed_packet += MAX_LOG_EVENT_HEADER;
mysql_mutex_lock(log_lock);
/*
open_binlog() sought to position 4.
Read the first event in case it's a Format_description_log_event, to
know the format. If there's no such event, we are 3.23 or 4.x. This
code, like before, can't read 3.23 binlogs.
This code will fail on a mixed relay log (one which has Format_desc then
Rotate then Format_desc).
*/
ev= Log_event::read_log_event(&log, (mysql_mutex_t*)0, description_event,
opt_master_verify_checksum);
if (ev)
{
if (ev->get_type_code() == FORMAT_DESCRIPTION_EVENT)
{
delete description_event;
description_event= (Format_description_log_event*) ev;
}
else
delete ev;
}
my_b_seek(&log, pos);
if (!description_event->is_valid())
{
errmsg="Invalid Format_description event; could be out of memory";
goto err;
}
for (event_count = 0;
(ev = Log_event::read_log_event(&log, (mysql_mutex_t*) 0,
description_event,
opt_master_verify_checksum)); )
{
if (ev->get_type_code() == FORMAT_DESCRIPTION_EVENT)
description_event->checksum_alg= ev->checksum_alg;
if (event_count >= limit_start &&
ev->net_send(protocol, linfo.log_file_name, pos))
{
errmsg = "Net error";
delete ev;
mysql_mutex_unlock(log_lock);
goto err;
}
pos = my_b_tell(&log);
delete ev;
if (++event_count >= limit_end)
break;
}
if (event_count < limit_end && log.error)
{
errmsg = "Wrong offset or I/O error";
mysql_mutex_unlock(log_lock);
goto err;
}
mysql_mutex_unlock(log_lock);
}
ret= FALSE;
err:
delete description_event;
if (file >= 0)
{
end_io_cache(&log);
mysql_file_close(file, MYF(MY_WME));
}
if (errmsg)
my_error(ER_ERROR_WHEN_EXECUTING_COMMAND, MYF(0),
"SHOW BINLOG EVENTS", errmsg);
else
my_eof(thd);
mysql_mutex_lock(&LOCK_thread_count);
thd->current_linfo = 0;
mysql_mutex_unlock(&LOCK_thread_count);
thd->variables.max_allowed_packet= old_max_allowed_packet;
DBUG_RETURN(ret);
}
/**
Execute a SHOW MASTER STATUS statement.
@param thd Pointer to THD object for the client thread executing the
statement.
@retval FALSE success
@retval TRUE failure
*/
bool show_binlog_info(THD* thd)
{
Protocol *protocol= thd->protocol;
DBUG_ENTER("show_binlog_info");
List<Item> field_list;
field_list.push_back(new Item_empty_string("File", FN_REFLEN));
field_list.push_back(new Item_return_int("Position",20,
MYSQL_TYPE_LONGLONG));
field_list.push_back(new Item_empty_string("Binlog_Do_DB",255));
field_list.push_back(new Item_empty_string("Binlog_Ignore_DB",255));
if (protocol->send_result_set_metadata(&field_list,
Protocol::SEND_NUM_ROWS | Protocol::SEND_EOF))
DBUG_RETURN(TRUE);
protocol->prepare_for_resend();
if (mysql_bin_log.is_open())
{
LOG_INFO li;
mysql_bin_log.get_current_log(&li);
int dir_len = dirname_length(li.log_file_name);
protocol->store(li.log_file_name + dir_len, &my_charset_bin);
protocol->store((ulonglong) li.pos);
protocol->store(binlog_filter->get_do_db());
protocol->store(binlog_filter->get_ignore_db());
if (protocol->write())
DBUG_RETURN(TRUE);
}
my_eof(thd);
DBUG_RETURN(FALSE);
}
/**
Execute a SHOW BINARY LOGS statement.
@param thd Pointer to THD object for the client thread executing the
statement.
@retval FALSE success
@retval TRUE failure
*/
bool show_binlogs(THD* thd)
{
IO_CACHE *index_file;
LOG_INFO cur;
File file;
char fname[FN_REFLEN];
List<Item> field_list;
uint length;
int cur_dir_len;
Protocol *protocol= thd->protocol;
DBUG_ENTER("show_binlogs");
if (!mysql_bin_log.is_open())
{
my_error(ER_NO_BINARY_LOGGING, MYF(0));
DBUG_RETURN(TRUE);
}
field_list.push_back(new Item_empty_string("Log_name", 255));
field_list.push_back(new Item_return_int("File_size", 20,
MYSQL_TYPE_LONGLONG));
if (protocol->send_result_set_metadata(&field_list,
Protocol::SEND_NUM_ROWS | Protocol::SEND_EOF))
DBUG_RETURN(TRUE);
mysql_mutex_lock(mysql_bin_log.get_log_lock());
mysql_bin_log.lock_index();
index_file=mysql_bin_log.get_index_file();
mysql_bin_log.raw_get_current_log(&cur); // dont take mutex
mysql_mutex_unlock(mysql_bin_log.get_log_lock()); // lockdep, OK
cur_dir_len= dirname_length(cur.log_file_name);
reinit_io_cache(index_file, READ_CACHE, (my_off_t) 0, 0, 0);
/* The file ends with EOF or empty line */
while ((length=my_b_gets(index_file, fname, sizeof(fname))) > 1)
{
int dir_len;
ulonglong file_length= 0; // Length if open fails
fname[--length] = '\0'; // remove the newline
protocol->prepare_for_resend();
dir_len= dirname_length(fname);
length-= dir_len;
protocol->store(fname + dir_len, length, &my_charset_bin);
if (!(strncmp(fname+dir_len, cur.log_file_name+cur_dir_len, length)))
file_length= cur.pos; /* The active log, use the active position */
else
{
/* this is an old log, open it and find the size */
if ((file= mysql_file_open(key_file_binlog,
fname, O_RDONLY | O_SHARE | O_BINARY,
MYF(0))) >= 0)
{
file_length= (ulonglong) mysql_file_seek(file, 0L, MY_SEEK_END, MYF(0));
mysql_file_close(file, MYF(0));
}
}
protocol->store(file_length);
if (protocol->write())
goto err;
}
mysql_bin_log.unlock_index();
my_eof(thd);
DBUG_RETURN(FALSE);
err:
mysql_bin_log.unlock_index();
DBUG_RETURN(TRUE);
}
/**
Load data's io cache specific hook to be executed
before a chunk of data is being read into the cache's buffer
The fuction instantianates and writes into the binlog
replication events along LOAD DATA processing.
@param file pointer to io-cache
@retval 0 success
@retval 1 failure
*/
int log_loaded_block(IO_CACHE* file)
{
DBUG_ENTER("log_loaded_block");
LOAD_FILE_INFO *lf_info;
uint block_len;
/* buffer contains position where we started last read */
uchar* buffer= (uchar*) my_b_get_buffer_start(file);
uint max_event_size= current_thd->variables.max_allowed_packet;
lf_info= (LOAD_FILE_INFO*) file->arg;
if (lf_info->thd->is_current_stmt_binlog_format_row())
DBUG_RETURN(0);
if (lf_info->last_pos_in_file != HA_POS_ERROR &&
lf_info->last_pos_in_file >= my_b_get_pos_in_file(file))
DBUG_RETURN(0);
for (block_len= (uint) (my_b_get_bytes_in_buffer(file)); block_len > 0;
buffer += min(block_len, max_event_size),
block_len -= min(block_len, max_event_size))
{
lf_info->last_pos_in_file= my_b_get_pos_in_file(file);
if (lf_info->wrote_create_file)
{
Append_block_log_event a(lf_info->thd, lf_info->thd->db, buffer,
min(block_len, max_event_size),
lf_info->log_delayed);
if (mysql_bin_log.write(&a))
DBUG_RETURN(1);
}
else
{
Begin_load_query_log_event b(lf_info->thd, lf_info->thd->db,
buffer,
min(block_len, max_event_size),
lf_info->log_delayed);
if (mysql_bin_log.write(&b))
DBUG_RETURN(1);
lf_info->wrote_create_file= 1;
}
}
DBUG_RETURN(0);
}
#endif /* HAVE_REPLICATION */