mirror/mariadb
1
0
Fork 0
mirror of https://github.com/MariaDB/server.git synced 2025-01-16 12:02:42 +01:00
Code Issues Projects Releases Packages Wiki Activity Actions
mariadb/mysql-test/main/show_explain.test
Vicențiu Ciorbaru 71ed8c136f Test cases require debug_sync enabled
2021-07-19 17:05:51 +03:00

1217 lines
34 KiB
Text
Raw Blame History

#
# Tests for SHOW EXPLAIN FOR functionality
#
--source include/have_debug.inc
--source include/have_debug_sync.inc
--source include/have_innodb.inc
# Using valgrind can cause 'reap' to fail. See comment below
--source include/not_valgrind.inc
--disable_warnings
drop table if exists t0, t1, t2, t3, t4;
drop view if exists v1;
--enable_warnings
SET @old_debug= @@session.debug;
#
# Testcases in this file do not work with embedded server. The reason for this
# is that we use the following commands for synchronization:
#
# set @show_explain_probe_select_id=1;
# SET debug_dbug='d,show_explain_probe_join_exec_start';
# send select count(*) from t1 where a < 100000;
#
# When ran with mysqltest_embedded, this translates into:
#
# Thread1> DBUG_PUSH("d,show_explain_probe_join_exec_start");
# Thread1> create another thread for doing "send ... reap"
# Thread2> mysql_parse("select count(*) from t1 where a < 100000");
#
# That is, "select count(*) ..." is ran in a thread for which DBUG_PUSH(...)
# has not been called. As a result, show_explain_probe_join_exec_start does not fire, and
# "select count(*) ..." does not wait till its SHOW EXPLAIN command, and the
# test fails.
#
-- source include/not_embedded.inc
set debug_sync='RESET';
create table t0 (a int);
insert into t0 values (0),(1),(2),(3),(4),(5),(6),(7),(8),(9);
create table t1 (a int);
insert into t1 select A.a + 10*B.a + 100*C.a from t0 A, t0 B, t0 C;
alter table t1 add b int, add c int, add filler char(32);
update t1 set b=a, c=a, filler='fooo';
alter table t1 add key(a), add key(b);
#
# Try killing a non-existent thread
#
--error ER_NO_SUCH_THREAD
show explain for 2000000000;
--error ER_SET_CONSTANTS_ONLY
show explain for (select max(a) from t0);
#
# Setup two threads and their ids
#
let $thr1=`select connection_id()`;
connect (con1, localhost, root,,);
connection con1;
let $thr2=`select connection_id()`;
SET @old_debug= @@session.debug;
connection default;
# SHOW EXPLAIN FOR <idle thread>
--error ER_TARGET_NOT_EXPLAINABLE
evalp show explain for $thr2;
# SHOW EXPLAIN FOR <ourselves>
--error ER_TARGET_NOT_EXPLAINABLE
evalp show explain for $thr1;
let $wait_condition= select State='show_explain_trap' from information_schema.processlist where id=$thr2;
#
# Test SHOW EXPLAIN for simple queries
#
connection con1;
set @show_explain_probe_select_id=1;
SET debug_dbug='+d,show_explain_probe_join_exec_start';
send select count(*) from t1 where a < 100000;
connection default;
--source include/wait_condition.inc
evalp show explain for $thr2;
connection con1;
reap;
send select max(c) from t1 where a < 10;
connection default;
--source include/wait_condition.inc
evalp show explain for $thr2;
connection con1;
reap;
--echo # We can catch EXPLAIN, too.
set @show_expl_tmp= @@optimizer_switch;
set optimizer_switch='index_condition_pushdown=on,mrr=on,mrr_sort_keys=on';
send explain select max(c) from t1 where a < 10;
connection default;
--source include/wait_condition.inc
evalp show explain for $thr2;
connection con1;
reap;
set optimizer_switch= @show_expl_tmp;
SET debug_dbug=@old_debug;
--echo # UNION, first branch
set @show_explain_probe_select_id=1;
SET debug_dbug='+d,show_explain_probe_join_exec_start';
send explain select a from t0 A union select a+1 from t0 B;
connection default;
--source include/wait_condition.inc
evalp show explain for $thr2;
connection con1;
reap;
SET debug_dbug=@old_debug;
--echo # UNION, second branch
set @show_explain_probe_select_id=1;
SET debug_dbug='+d,show_explain_probe_join_exec_start';
send explain select a from t0 A union select a+1 from t0 B;
connection default;
--source include/wait_condition.inc
evalp show explain for $thr2;
connection con1;
reap;
SET debug_dbug=@old_debug;
--echo # Uncorrelated subquery, select
set @show_explain_probe_select_id=1;
SET debug_dbug='+d,show_explain_probe_join_exec_start';
send select a, (select max(a) from t0 B) from t0 A where a<1;
connection default;
--source include/wait_condition.inc
evalp show explain for $thr2;
connection con1;
reap;
SET debug_dbug=@old_debug;
--echo # Uncorrelated subquery, explain
set @show_explain_probe_select_id=1;
SET debug_dbug='+d,show_explain_probe_join_exec_start';
send explain select a, (select max(a) from t0 B) from t0 A where a<1;
connection default;
--source include/wait_condition.inc
evalp show explain for $thr2;
connection con1;
reap;
SET debug_dbug=@old_debug;
--echo # correlated subquery, select
set @show_explain_probe_select_id=1;
SET debug_dbug='+d,show_explain_probe_join_exec_start';
send select a, (select max(a) from t0 b where b.a+a.a<10) from t0 a where a<1;
connection default;
--source include/wait_condition.inc
evalp show explain for $thr2;
connection con1;
reap;
SET debug_dbug=@old_debug;
--echo # correlated subquery, explain
set @show_explain_probe_select_id=1;
SET debug_dbug='+d,show_explain_probe_join_exec_start';
send select a, (select max(a) from t0 b where b.a+a.a<10) from t0 a where a<1;
connection default;
--source include/wait_condition.inc
evalp show explain for $thr2;
connection con1;
reap;
SET debug_dbug=@old_debug;
--echo # correlated subquery, select, while inside the subquery
set @show_explain_probe_select_id=2; # <---
SET debug_dbug='+d,show_explain_probe_join_exec_start';
send select a, (select max(a) from t0 b where b.a+a.a<10) from t0 a where a<1;
connection default;
--source include/wait_condition.inc
evalp show explain for $thr2;
connection con1;
reap;
SET debug_dbug=@old_debug;
--echo # correlated subquery, explain, while inside the subquery
set @show_explain_probe_select_id=2;
SET debug_dbug='+d,show_explain_probe_join_exec_start';
send select a, (select max(a) from t0 b where b.a+a.a<10) from t0 a where a<1;
connection default;
--source include/wait_condition.inc
evalp show explain for $thr2;
connection con1;
reap;
SET debug_dbug=@old_debug;
--echo # correlated subquery, explain, while inside the subquery
set @show_explain_probe_select_id=1;
SET debug_dbug='+d,show_explain_probe_join_exec_end';
send select a, (select max(a) from t0 b where b.a+a.a<10) from t0 a where a<1;
connection default;
--source include/wait_condition.inc
evalp show explain for $thr2;
connection con1;
reap;
SET debug_dbug=@old_debug;
# TODO: explain in the parent subuqery when the un-correlated child has been
# run (and have done irreversible cleanups)
# ^^ Is this at all possible after 5.3?
# Maybe, for 5.3 try this:
# - run before/after the parent has invoked child's optimization
# - run after materialization
--echo # Try to do SHOW EXPLAIN for a query that runs a SET command:
--echo # I've found experimentally that select_id==2 here...
--echo #
set @show_explain_probe_select_id=2;
SET debug_dbug='+d,show_explain_probe_join_exec_start';
send set @foo= (select max(a) from t0 where sin(a) >0);
connection default;
--source include/wait_condition.inc
--error ER_TARGET_NOT_EXPLAINABLE
evalp show explain for $thr2;
evalp kill query $thr2;
connection con1;
--error ER_QUERY_INTERRUPTED
reap;
SET debug_dbug=@old_debug;
--echo #
--echo # Attempt SHOW EXPLAIN for an UPDATE
--echo #
create table t2 as select a as a, a as dummy from t0 limit 2;
set @show_explain_probe_select_id=2;
SET debug_dbug='+d,show_explain_probe_join_exec_start';
send update t2 set dummy=0 where (select max(a) from t0 where t2.a + t0.a <3) >3 ;
connection default;
--source include/wait_condition.inc
#--error ER_TARGET_NOT_EXPLAINABLE
evalp show explain for $thr2;
--source include/wait_condition.inc
#--error ER_TARGET_NOT_EXPLAINABLE
evalp show explain for $thr2;
connection con1;
reap;
drop table t2;
SET debug_dbug=@old_debug;
--echo #
--echo # Attempt SHOW EXPLAIN for a DELETE (UPD: now works)
--echo #
create table t2 as select a as a, a as dummy from t0 limit 2;
set @show_explain_probe_select_id=2;
SET debug_dbug='+d,show_explain_probe_join_exec_start';
send delete from t2 where (select max(a) from t0 where t2.a + t0.a <3) >3 ;
connection default;
--source include/wait_condition.inc
#--error ER_TARGET_NOT_EXPLAINABLE
evalp show explain for $thr2;
--source include/wait_condition.inc
#--error ER_TARGET_NOT_EXPLAINABLE
evalp show explain for $thr2;
connection con1;
reap;
drop table t2;
SET debug_dbug=@old_debug;
--echo #
--echo # Multiple SHOW EXPLAIN calls for one select
--echo #
create table t2 as select a as a, a as dummy from t0 limit 3;
set @show_explain_probe_select_id=2;
SET debug_dbug='+d,show_explain_probe_join_exec_start';
send select t2.a, ((select max(a) from t0 where t2.a + t0.a <3) >3) as SUBQ from t2;
connection default;
--source include/wait_condition.inc
evalp show explain for $thr2;
--source include/wait_condition.inc
evalp show explain for $thr2;
--source include/wait_condition.inc
evalp show explain for $thr2;
connection con1;
reap;
drop table t2;
SET debug_dbug=@old_debug;
--echo #
--echo # SHOW EXPLAIN for SELECT ... ORDER BY with "Using filesort"
--echo #
explain select * from t0 order by a;
SET debug_dbug='+d,show_explain_probe_join_exec_start';
set @show_explain_probe_select_id=1;
send select * from t0 order by a;
connection default;
--source include/wait_condition.inc
evalp show explain for $thr2;
connection con1;
reap;
SET debug_dbug=@old_debug;
--echo #
--echo # SHOW EXPLAIN for SELECT ... with "Using temporary"
--echo #
connection default;
explain select distinct a from t0;
connection con1;
SET debug_dbug='+d,show_explain_probe_join_exec_start';
set @show_explain_probe_select_id=1;
send select distinct a from t0;
connection default;
--source include/wait_condition.inc
evalp show explain for $thr2;
connection con1;
reap;
SET debug_dbug=@old_debug;
--echo #
--echo # SHOW EXPLAIN for SELECT ... with "Using temporary; Using filesort"
--echo #
connection default;
explain select distinct a from t0;
connection con1;
SET debug_dbug='+d,show_explain_probe_join_exec_start';
set @show_explain_probe_select_id=1;
send select distinct a from t0;
connection default;
--source include/wait_condition.inc
evalp show explain for $thr2;
connection con1;
reap;
SET debug_dbug=@old_debug;
--echo #
--echo # MDEV-238: SHOW EXPLAIN: Server crashes in JOIN::print_explain with FROM subquery and GROUP BY
--echo #
CREATE TABLE t2 ( a INT );
INSERT INTO t2 VALUES (1),(2),(1),(4),(2);
explain SELECT alias.a FROM t2, ( SELECT * FROM t2 ) AS alias GROUP BY alias.a;
SET debug_dbug='+d,show_explain_in_find_all_keys';
send SELECT alias.a FROM t2, ( SELECT * FROM t2 ) AS alias GROUP BY alias.a;
connection default;
--source include/wait_condition.inc
--echo # FIXED by "conservative assumptions about when QEP is available" fix:
--echo # NOTE: current code will not show "Using join buffer":
#--error ER_TARGET_NOT_EXPLAINABLE
evalp show explain for $thr2;
connection con1;
reap;
SET debug_dbug=@old_debug;
DROP TABLE t2;
--echo #
--echo # MDEV-239: Assertion `field_types == 0 ... ' failed in Protocol_text::store(double, uint32, String*) with
--echo # SHOW EXPLAIN over EXPLAIN EXTENDED
--echo #
CREATE TABLE t2 (a INT);
INSERT INTO t2 VALUES (1),(2),(1),(4),(2);
EXPLAIN EXTENDED SELECT alias.a FROM t2, ( SELECT * FROM t2 ) AS alias GROUP BY alias.a ;
set @show_explain_probe_select_id=1;
SET debug_dbug='+d,show_explain_probe_join_exec_end';
send EXPLAIN EXTENDED SELECT alias.a FROM t2, ( SELECT * FROM t2 ) AS alias GROUP BY alias.a ;
connection default;
--source include/wait_condition.inc
evalp show explain for $thr2;
connection con1;
reap;
SET debug_dbug=@old_debug;
DROP TABLE t2;
--echo #
--echo # MDEV-240: SHOW EXPLAIN: Assertion `this->optimized == 2' failed in
--echo # JOIN::print_explain on query with a JOIN, TEMPTABLE view,
--echo #
CREATE TABLE t3 (a INT);
CREATE ALGORITHM=TEMPTABLE VIEW v1 AS SELECT * FROM t3;
INSERT INTO t3 VALUES (8);
CREATE TABLE t2 (b INT);
INSERT INTO t2 VALUES (4),(5),(6),(7),(8),(9);
explain SELECT * FROM v1, t2;
set @show_explain_probe_select_id=2;
SET debug_dbug='+d,show_explain_probe_join_exec_end';
send SELECT * FROM v1, t2;
connection default;
--source include/wait_condition.inc
--error ER_TARGET_NOT_EXPLAINABLE
evalp show explain for $thr2;
evalp kill query $thr2;
connection con1;
--error ER_QUERY_INTERRUPTED
reap;
SET debug_dbug=@old_debug;
DROP VIEW v1;
DROP TABLE t2, t3;
--echo #
--echo # MDEV-267: SHOW EXPLAIN: Server crashes in JOIN::print_explain on most of queries
--echo #
set @show_explain_probe_select_id=1;
SET debug_dbug='+d,show_explain_probe_join_exec_end';
send select sleep(1);
connection default;
--source include/wait_condition.inc
evalp show explain for $thr2;
connection con1;
reap;
SET debug_dbug=@old_debug;
--echo #
--echo # Same as above, but try another reason for JOIN to be degenerate
--echo #
set @show_explain_probe_select_id=1;
SET debug_dbug='+d,show_explain_probe_join_exec_end';
send select * from t0 where 1>10;
connection default;
--source include/wait_condition.inc
#--error ER_TARGET_NOT_EXPLAINABLE
evalp show explain for $thr2;
connection con1;
reap;
SET debug_dbug=@old_debug;
--echo #
--echo # Same as above, but try another reason for JOIN to be degenerate (2)
--echo #
create table t3(a int primary key);
insert into t3 select a from t0;
set @show_explain_probe_select_id=1;
SET debug_dbug='+d,show_explain_probe_join_exec_end';
send select * from t0,t3 where t3.a=112233;
connection default;
--source include/wait_condition.inc
# --error ER_TARGET_NOT_EXPLAINABLE
evalp show explain for $thr2;
connection con1;
reap;
SET debug_dbug=@old_debug;
drop table t3;
--echo #
--echo # MDEV-270: SHOW EXPLAIN: server crashes in JOIN::print_explain on a query with
--echo # select tables optimized away
--echo #
CREATE TABLE t2 (pk INT PRIMARY KEY, a INT ) ENGINE=MyISAM;
INSERT INTO t2 VALUES
(1,4),(2,62),(3,7),(4,1),(5,0),(6,7),(7,7),(8,1),(9,7),(10,1),
(11,5),(12,2),(13,0),(14,1),(15,8),(16,1),(17,1),(18,9),(19,1),(20,5) ;
explain SELECT * FROM t2 WHERE a =
(SELECT MAX(a) FROM t2
WHERE pk= (SELECT MAX(pk) FROM t2 WHERE pk = 3)
);
set @show_explain_probe_select_id=1;
SET debug_dbug='+d,show_explain_probe_do_select';
send SELECT * FROM t2 WHERE a =
(SELECT MAX(a) FROM t2
WHERE pk= (SELECT MAX(pk) FROM t2 WHERE pk = 3)
);
connection default;
--source include/wait_condition.inc
evalp show explain for $thr2;
connection con1;
reap;
SET debug_dbug=@old_debug;
drop table t2;
--echo #
--echo # MDEV-273: SHOW EXPLAIN: server crashes in JOIN::print_explain on a query with impossible WHERE
--echo #
CREATE TABLE t2 (a1 INT, KEY(a1)) ENGINE=MyISAM;
INSERT INTO t2 VALUES
(4),(6),(7),(1),(0),(7),(7),(1),(7),(1),
(5),(2),(0),(1),(8),(1),(1),(9),(1),(5);
CREATE TABLE t3 (b1 INT) ENGINE=MyISAM;
INSERT INTO t3 VALUES
(4),(5),(8),(4),(8),(2),(9),(6),(4),(8),
(3),(5),(9),(6),(8),(3),(2),(6),(3),(1),
(4),(3),(1),(7),(0),(0),(9),(5),(9),(0),
(2),(2),(5),(9),(1),(4),(8),(6),(5),(5),
(1),(7),(2),(8),(9),(3),(2),(6),(6),(5),
(4),(3),(2),(7),(4),(6),(0),(8),(5),(8),
(2),(9),(7),(5),(7),(0),(4),(3),(1),(0),
(6),(2),(8),(3),(7),(3),(5),(5),(1),(2),
(1),(7),(1),(9),(9),(8),(3);
CREATE TABLE t4 (c1 INT) ENGINE=MyISAM;
EXPLAIN
SELECT count(*) FROM t2, t3
WHERE a1 < ALL (
SELECT a1 FROM t2
WHERE a1 IN ( SELECT a1 FROM t2, t4 )
);
set @show_explain_probe_select_id=1;
SET debug_dbug='+d,show_explain_probe_do_select';
send
SELECT count(*) FROM t2, t3
WHERE a1 < ALL (
SELECT a1 FROM t2
WHERE a1 IN ( SELECT a1 FROM t2, t4 )
);
connection default;
--source include/wait_condition.inc
evalp show explain for $thr2;
connection con1;
reap;
SET debug_dbug=@old_debug;
drop table t2, t3, t4;
--echo #
--echo # MDEV-275: SHOW EXPLAIN: server crashes in JOIN::print_explain with IN subquery and aggregate function
--echo #
CREATE TABLE t2 ( `pk` INT NOT NULL PRIMARY KEY, `a1` INT NOT NULL, KEY(`a1`)) ENGINE=MyISAM;
INSERT INTO t2 VALUES
(1,5),(2,4),(3,6),(4,9),(5,2),(6,8),(7,4),(8,8),(9,0),(10,43),
(11,23),(12,3),(13,45),(14,16),(15,2),(16,33),(17,2),(18,5),(19,9),(20,2);
set @show_explain_probe_select_id=1;
SET debug_dbug='+d,show_explain_probe_join_exec_end';
send
SELECT * FROM t2 WHERE (5, 78) IN (SELECT `a1`, MAX(`a1`) FROM t2 GROUP BY `a1`);
connection default;
--source include/wait_condition.inc
# --error ER_TARGET_NOT_EXPLAINABLE
evalp show explain for $thr2;
connection con1;
reap;
SET debug_dbug=@old_debug;
DROP TABLE t2;
DROP TABLE t1;
--echo #
--echo # MDEV-305: SHOW EXPLAIN: ref returned by SHOW EXPLAIN is different from the normal EXPLAIN ('const' vs empty string)
--echo #
CREATE TABLE t1(a INT, KEY(a));
INSERT INTO t1 VALUES (3),(1),(5),(1);
set @show_explain_probe_select_id=1;
SET debug_dbug='+d,show_explain_probe_join_exec_start';
send SELECT 'test' FROM t1 WHERE a=1;
connection default;
--source include/wait_condition.inc
evalp show explain for $thr2;
connection con1;
reap;
SET debug_dbug=@old_debug;
DROP TABLE t1;
--echo #
--echo # MDEV-299: SHOW EXPLAIN: Plan produced by SHOW EXPLAIN changes back and forth during query execution
--echo #
create table t1 (key1 int, col1 int, col2 int, filler char(100), key(key1));
insert into t1 select A.a+ 10 * B.a, 10, 10, 'filler-data' from t0 A, t0 B;
# Make matches 3 records
update t1 set col1=3, col2=10 where key1=1; # small range
update t1 set col1=3, col2=1000 where key1=2; # big range
update t1 set col1=3, col2=10 where key1=3; # small range again
update t1 set col1=3, col2=1000 where key1=4; # big range
set @tmp_mdev299_jcl= @@join_cache_level;
set join_cache_level=0;
explain select count(*) from t1 A, t1 B where B.key1 < A.col2 and A.col1=3 AND B.col2 + 1 < 100;
set @show_explain_probe_select_id=1;
SET debug_dbug='+d,show_explain_probe_test_if_quick_select';
send
select count(*) from t1 A, t1 B where B.key1 < A.col2 and A.col1=3 AND B.col2 + 1 < 100;
connection default;
--source include/wait_condition.inc
evalp show explain for $thr2;
--source include/wait_condition.inc
evalp show explain for $thr2;
--source include/wait_condition.inc
evalp show explain for $thr2;
--source include/wait_condition.inc
evalp show explain for $thr2;
connection con1;
reap;
SET debug_dbug=@old_debug;
drop table t1;
--echo #
--echo # MDEV-297: SHOW EXPLAIN: Server gets stuck until timeout occurs while
--echo # executing SHOW INDEX and SHOW EXPLAIN in parallel
--echo #
CREATE TABLE t1(a INT, b INT, c INT, KEY(a), KEY(b), KEY(c));
INSERT INTO t1 (a) VALUES (3),(1),(5),(1);
set @show_explain_probe_select_id=1;
SET debug_dbug='+d,show_explain_probe_join_exec_start';
send SHOW INDEX FROM t1;
connection default;
--source include/wait_condition.inc
evalp show explain for $thr2;
connection con1;
reap;
SET debug_dbug=@old_debug;
DROP TABLE t1;
--echo #
--echo # MDEV-324: SHOW EXPLAIN: Plan produced by SHOW EXPLAIN for a query with TEMPTABLE view
--echo # loses 'DERIVED' line on the way without saying that the plan was already deleted
--echo #
CREATE TABLE t1 (a INT);
INSERT INTO t1 VALUES (1),(2);
CREATE ALGORITHM=TEMPTABLE VIEW v1 AS SELECT * FROM t1;
EXPLAIN SELECT a + 1 FROM v1;
SET debug_dbug='+d,show_explain_probe_join_tab_preread';
set @show_explain_probe_select_id=1;
send
SELECT a + 1 FROM v1;
connection default;
--source include/wait_condition.inc
evalp show explain for $thr2;
connection con1;
reap;
SET debug_dbug=@old_debug;
DROP VIEW v1;
DROP TABLE t1;
--echo #
--echo # MDEV-323: SHOW EXPLAIN: Plan produced by SHOW EXPLAIN loses
--echo # 'UNION RESULT' line on the way without saying that the plan was already deleted
--echo #
CREATE TABLE t1 (a INT);
INSERT INTO t1 VALUES (4),(6);
EXPLAIN
SELECT a FROM t1 WHERE a IN ( SELECT 1+SLEEP(0.01) UNION SELECT 2 );
SET debug_dbug='+d,show_explain_probe_union_read';
send
SELECT a FROM t1 WHERE a IN ( SELECT 1+SLEEP(0.01) UNION SELECT 2 );
connection default;
--source include/wait_condition.inc
evalp show explain for $thr2;
--source include/wait_condition.inc
evalp show explain for $thr2;
connection con1;
reap;
SET debug_dbug=@old_debug;
DROP TABLE t1;
--echo #
--echo # MDEV-327: SHOW EXPLAIN: Different select_type in plans produced by SHOW EXPLAIN
--echo # and standard EXPLAIN: 'SUBQUERY' vs 'DEPENDENT SUBQUERY'
--echo #
CREATE TABLE t1 (a INT) ENGINE=Aria;
INSERT INTO t1 VALUES
(4),(6),(3),(5),(3),(246),(2),(9),(3),(8),
(1),(8),(8),(5),(7),(5),(1),(6),(2),(9);
CREATE TABLE t2 (b INT) ENGINE=Aria;
INSERT INTO t2 VALUES
(1),(7),(4),(7),(0),(2),(9),(4),(0),(9),
(1),(3),(8),(8),(18),(84),(6),(3),(6),(6);
EXPLAIN
SELECT * FROM t1, ( SELECT * FROM t2 ) AS alias
WHERE a < ALL ( SELECT b FROM t1, t2 WHERE a = b );
set @show_explain_probe_select_id=1;
SET debug_dbug='+d,show_explain_probe_join_exec_start';
--send
SELECT * FROM t1, ( SELECT * FROM t2 ) AS alias
WHERE a < ALL ( SELECT b FROM t1, t2 WHERE a = b );
connection default;
--source include/wait_condition.inc
evalp show explain for $thr2;
connection con1;
reap;
SET debug_dbug=@old_debug;
DROP TABLE t1, t2;
--echo #
--echo # Test that SHOW EXPLAIN will print 'Distinct'.
--echo #
CREATE TABLE t1 (a int(10) unsigned not null primary key,b int(10) unsigned);
INSERT INTO t1 VALUES (1,1),(2,1),(3,1),(4,1);
CREATE TABLE t3 (a int(10) unsigned, key(A), b text);
INSERT INTO t3 VALUES (1,'1'),(2,'2');
create temporary table t4 select * from t3;
insert into t3 select * from t4;
insert into t4 select * from t3;
insert into t3 select * from t4;
insert into t4 select * from t3;
insert into t3 select * from t4;
insert into t4 select * from t3;
insert into t3 select * from t4;
explain select distinct t1.a from t1,t3 where t1.a=t3.a;
set @show_explain_probe_select_id=1;
SET debug_dbug='+d,show_explain_probe_join_exec_start';
--send
select distinct t1.a from t1,t3 where t1.a=t3.a;
connection default;
--source include/wait_condition.inc
evalp show explain for $thr2;
connection con1;
reap;
SET debug_dbug=@old_debug;
drop table t1,t3,t4;
--echo #
--echo # ---------- SHOW EXPLAIN and permissions -----------------
--echo #
create user test2@localhost;
grant ALL on test.* to test2@localhost;
# Give the user SUPER privilege so it can SET debug_dbug variable.
grant super on *.* to test2@localhost;
connect (con2, localhost, test2,,);
connection con1;
--echo #
--echo # First, make sure that user 'test2' cannot do SHOW EXPLAIN on us
--echo #
set @show_explain_probe_select_id=1;
SET debug_dbug='+d,show_explain_probe_join_exec_start';
send
select * from t0 where a < 3;
connection default;
--source include/wait_condition.inc
connection con2;
--error ER_SPECIFIC_ACCESS_DENIED_ERROR
evalp show explain for $thr2;
connection default;
evalp show explain for $thr2;
connection con1;
reap;
SET debug_dbug=@old_debug;
--echo #
--echo # Check that user test2 can do SHOW EXPLAIN on its own queries
--echo #
connect (con3, localhost, test2,,);
connection con2;
let $thr_con2=`select connection_id()`;
set @show_explain_probe_select_id=1;
SET debug_dbug='+d,show_explain_probe_join_exec_start';
send
select * from t0 where a < 3;
connection con1;
let $save_wait_condition= $wait_condition;
let $wait_condition= select State='show_explain_trap' from information_schema.processlist where id=$thr_con2;
--source include/wait_condition.inc
connection con3;
evalp show explain for $thr_con2;
connection con2;
reap;
connection con1;
disconnect con3;
let $wait_condition= $save_wait_condition;
--echo #
--echo # Now, grant test2 a PROCESSLIST permission, and see that he's able to observe us
--echo #
disconnect con2;
grant process on *.* to test2@localhost;
connect (con2, localhost, test2,,);
connection con1;
SET debug_dbug=@old_debug;
set @show_explain_probe_select_id=1;
SET debug_dbug='+d,show_explain_probe_join_exec_start';
send
select * from t0 where a < 3;
connection default;
--source include/wait_condition.inc
connection con2;
evalp show explain for $thr2;
connection con1;
reap;
SET debug_dbug=@old_debug;
revoke all privileges on test.* from test2@localhost;
drop user test2@localhost;
disconnect con2;
--echo #
--echo # Test that it is possible to KILL a SHOW EXPLAIN command that's waiting
--echo # on its target thread
--echo #
connect (con2, localhost, root,,);
connect (con3, localhost, root,,);
connection con2;
create table t1 (pk int primary key, data char(64)) engine=innodb;
insert into t1 select A.a + 10 * B.a + 100 * C.a, 'data1' from t0 A, t0 B, t0 C;
--echo # Lock two threads
set autocommit=0;
select * from t1 where pk between 10 and 20 for update;
connection con1;
set autocommit=0;
# This will freeze
send
select * from t1 where pk between 10 and 20 for update;
# run SHOW EXPLAIN on a frozen thread
connection default;
let $save_wait_condition= $wait_condition;
let $wait_condition=
select 1
from information_schema.INNODB_LOCK_WAITS
where
requesting_trx_id=(select trx_id
from information_schema.INNODB_TRX
where trx_mysql_thread_id=$thr2);
let $thr_default=`select connection_id()`;
--source include/wait_condition.inc
--echo # do: send_eval show explain for thr2;
--disable_query_log
send_eval show explain for $thr2;
--enable_query_log
# kill the SHOW EXPLAIN command
connection con3;
let $wait_condition= select State='show explain' from information_schema.processlist where id=$thr_default;
--source include/wait_condition.inc
evalp kill query $thr_default;
connection default;
# This may fail when using valgrind
--error ER_QUERY_INTERRUPTED
reap;
connection con2;
rollback;
connection con1;
reap;
drop table t1;
disconnect con3;
disconnect con2;
let $wait_condition= $save_wait_condition;
--echo #
--echo # Check that the I_S table is invisible
--echo #
select table_name from information_schema.tables where table_schema='information_schema' and table_name like '%explain%';
--echo #
--echo # MDEV-325: SHOW EXPLAIN: Plan produced by SHOW EXPLAIN is different from standard EXPLAIN: type ALL vs 'index_merge'..
--echo #
CREATE TABLE t1 (a INT, b INT, KEY(a), KEY(b)) ENGINE=MyISAM;
INSERT INTO t1 VALUES
(8,0),(128,5050),(5372,8),(234,7596),(2,0),(2907,8930),(1,0),
(0,5224),(8,7638),(960,5),(9872,1534),(0,2295),(3408,9809),
(7,0),(1168,0),(2089,5570),(0,205),(88,1018),(0,26528),
(0,0),(4,5567),(1444,145),(6,0),(1,7535),(7793,534),(70,9),
(178,1),(44,5),(189,0),(3,0);
EXPLAIN
SELECT a+SLEEP(0.01) FROM t1
WHERE a IN ( 255, 0 ) OR b BETWEEN 6 AND 129
ORDER BY b;
set @show_explain_probe_select_id=1;
SET debug_dbug='+d,show_explain_probe_join_exec_start';
--send
SELECT a+SLEEP(0.01) FROM t1
WHERE a IN ( 255, 0 ) OR b BETWEEN 6 AND 129
ORDER BY b;
connection default;
--source include/wait_condition.inc
evalp show explain for $thr2;
connection con1;
reap;
SET debug_dbug=@old_debug;
set @show_explain_probe_select_id=1;
SET debug_dbug='+d,show_explain_probe_do_select';
--send
SELECT a+SLEEP(0.01) FROM t1
WHERE a IN ( 255, 0 ) OR b BETWEEN 6 AND 129
ORDER BY b;
connection default;
--source include/wait_condition.inc
evalp show explain for $thr2;
connection con1;
reap;
SET debug_dbug=@old_debug;
drop table t1;
--echo #
--echo # MDEV-298: SHOW EXPLAIN: Plan returned by SHOW EXPLAIN only contains
--echo # 'Using temporary' while the standard EXPLAIN says 'Using temporary; Using filesort'
--echo #
CREATE TABLE t1 (a INT);
INSERT INTO t1 VALUES (1),(2),(3),(4),(5),(6),(7),(8),(9),
(10),(11),(12),(13),(14),(15),(16);
INSERT INTO t1 SELECT t11.a FROM t1 t11, t1 t12, t1 t13;
EXPLAIN SELECT a FROM t1 GROUP BY a;
set @show_explain_probe_select_id=1;
SET debug_dbug='+d,show_explain_probe_join_exec_start';
--send
SELECT a FROM t1 GROUP BY a;
connection default;
--source include/wait_condition.inc
evalp show explain for $thr2;
connection con1;
reap;
SET debug_dbug=@old_debug;
drop table t1;
--echo #
--echo # MDEV-408: SHOW EXPLAIN: Some values are chopped off in SHOW EXPLAIN output
--echo #
CREATE TABLE t1 (a INT, b VARCHAR(35)) ENGINE=InnoDB;
INSERT INTO t1 VALUES (3989,'Abilene'),(3873,'Akron');
CREATE TABLE t2 (c INT, d VARCHAR(52) PRIMARY KEY, KEY(c)) ENGINE=InnoDB;
INSERT INTO t2 VALUES (86,'English'),(87,'Russian');
explain SELECT SUM(a + SLEEP(0.1)) FROM t1 WHERE a IN ( SELECT c FROM t2 WHERE d < b ) OR b < 's';
set @show_explain_probe_select_id=1;
SET debug_dbug='+d,show_explain_probe_join_exec_start';
--send
SELECT SUM(a + SLEEP(0.1)) FROM t1 WHERE a IN ( SELECT c FROM t2 WHERE d < b ) OR b < 's';
connection default;
--source include/wait_condition.inc
evalp show explain for $thr2;
connection con1;
reap;
SET debug_dbug=@old_debug;
drop table t1, t2;
--echo #
--echo # MDEV-412: SHOW EXPLAIN: Server crashes in JOIN::print_explain on a query with inner join and ORDER BY the same column twice
--echo #
CREATE TABLE t1 (a INT PRIMARY KEY, b VARCHAR(3), KEY(b)) ENGINE=MyISAM;
INSERT INTO t1 VALUES
(3795,'USA'),(3913,'USA'),(3846,'ITA'),(4021,'USA'),(4005,'RUS'),(4038,'USA'),
(3825,'USA'),(3840,'USA'),(3987,'USA'),(3807,'USA'),(3896,'USA'),(4052,'USA'),
(3973,'USA'),(3982,'ITA'),(3965,'USA'),(3852,'RUS'),(4006,'USA'),(3800,'USA'),
(4020,'USA'),(4040,'USA'),(3916,'USA'),(3817,'USA'),(3885,'USA'),(3802,'USA'),
(4009,'ITA'),(3895,'USA'),(3963,'RUS'),(4045,'USA'),(3988,'USA'),(3815,'USA'),
(4063,'USA'),(3978,'USA'),(4019,'USA'),(3954,'USA'),(3950,'USA'),(3974,'ITA'),
(4054,'USA'),(4061,'RUS'),(3976,'USA'),(3966,'USA'),(3957,'USA'),(3981,'USA'),
(3923,'USA'),(3876,'USA'),(3819,'USA'),(3877,'USA'),(3829,'ITA'),(3964,'USA'),
(4053,'RUS'),(3917,'USA'),(3874,'USA'),(4023,'USA'),(4001,'USA'),(3872,'USA'),
(3890,'USA'),(3962,'USA'),(3886,'USA'),(4026,'ITA'),(3869,'USA'),(3937,'RUS'),
(3975,'USA'),(3944,'USA'),(3908,'USA'),(3867,'USA'),(3947,'USA'),(3838,'USA'),
(3796,'USA'),(3893,'USA'),(3920,'ITA'),(3994,'USA'),(3875,'RUS'),(4011,'USA'),
(4013,'USA'),(3810,'USA'),(3834,'USA'),(3968,'USA'),(3931,'USA'),(3839,'USA'),
(4042,'USA'),(4039,'ITA'),(3811,'USA'),(3837,'RUS'),(4041,'USA'),(3884,'USA'),
(3894,'USA'),(3879,'USA'),(3942,'USA'),(3959,'USA'),(3814,'USA'),(4044,'USA'),
(3971,'ITA'),(3823,'USA'),(3793,'RUS'),(3855,'USA'),(3905,'USA'),(3865,'USA'),
(4046,'USA'),(3990,'USA'),(4022,'USA'),(3833,'USA'),(3918,'USA'),(4064,'ITA'),
(3821,'USA'),(3836,'RUS'),(3921,'USA'),(3914,'USA'),(3888,'USA');
CREATE TABLE t2 (c VARCHAR(3) PRIMARY KEY) ENGINE=MyISAM;
INSERT INTO t2 VALUES ('USA');
CREATE TABLE t3 (d VARCHAR(3), e VARCHAR(52), PRIMARY KEY (d,e)) ENGINE=MyISAM;
INSERT INTO t3 VALUES
('JPN','Japanese'),('KOR','Korean'),('POL','Polish'),('PRT','Portuguese'),
('ESP','Spanish'),('FRA','French'),('VNM','Vietnamese');
explain
SELECT b AS field1, b AS field2 FROM t1, t2, t3 WHERE d = b ORDER BY field1, field2;
set @show_explain_probe_select_id=1;
SET debug_dbug='+d,show_explain_probe_do_select';
send
SELECT b AS field1, b AS field2 FROM t1, t2, t3 WHERE d = b ORDER BY field1, field2;
connection default;
--source include/wait_condition.inc
evalp show explain for $thr2;
connection con1;
reap;
SET debug_dbug=@old_debug;
DROP TABLE t1,t2,t3;
--echo #
--echo # MDEV-423: SHOW EXPLAIN: 'Using where' for a subquery is shown in EXPLAIN, but not in SHOW EXPLAIN output
--echo #
CREATE TABLE t1 (a INT) ENGINE=MyISAM;
INSERT INTO t1 VALUES (7),(0),(9),(3),(4),(2),(5),(7),(0),(9),(3),(4),(2),(5);
CREATE TABLE t2 (b INT, c INT) ENGINE=MyISAM;
INSERT INTO t2 VALUES
(0,4),(8,6),(1,3),(8,5),(9,3),(24,246),(6,2),(1,9),(6,3),(2,8),
(4,1),(8,8),(4,8),(4,5),(7,7),(4,5),(1,1),(9,6),(4,2),(8,9);
create table t3 like t2;
insert into t3 select * from t2;
explain
SELECT max(a+b+c) FROM t1 AS alias1, ( SELECT * FROM t2 ) AS alias
WHERE EXISTS ( SELECT * FROM t3 WHERE b = c ) OR a <= 10;
set @show_explain_probe_select_id=1;
SET debug_dbug='+d,show_explain_probe_join_exec_start';
send
SELECT max(a+b+c) FROM t1 AS alias1, ( SELECT * FROM t2 ) AS alias
WHERE EXISTS ( SELECT * FROM t3 WHERE b = c ) OR a <= 10;
connection default;
--source include/wait_condition.inc
evalp show explain for $thr2;
connection con1;
reap;
SET debug_dbug=@old_debug;
DROP TABLE t1,t2,t3;
--echo #
--echo # MDEV-416: Server crashes in SQL_SELECT::cleanup on EXPLAIN with SUM ( DISTINCT ) in a non-correlated subquery (5.5-show-explain tree)
--echo #
CREATE TABLE t1 (a INT);
INSERT INTO t1 VALUES (1),(2);
CREATE TABLE t2 (b INT);
INSERT INTO t2 VALUES (8),(9);
EXPLAIN SELECT * FROM t1
WHERE ( 8, 89 ) IN ( SELECT b, SUM( DISTINCT b ) FROM t2 GROUP BY b );
DROP TABLE t1,t2;
--echo #
--echo # Check if queries in non-default charsets work.
--echo #
set names cp1251;
# The below are two Russian letters with codes E3FB in cp1251 encoding.
select charset('<27><>');
select hex('<27><>');
set @show_explain_probe_select_id=1;
SET debug_dbug='+d,show_explain_probe_join_exec_start';
send
select * from t0 where length('<27><>') = a;
connection default;
set names utf8;
--source include/wait_condition.inc
evalp show explain for $thr2;
set names default;
connection con1;
# The constant should be two letters, the last looking like 'bl'
reap;
SET debug_dbug=@old_debug;
set names default;
--echo #
--echo # MDEV-462: SHOW EXPLAIN: Assertion `table_list->table' fails in find_field_in_table_ref if FOR contains a non-numeric value
--echo #
--error ER_SET_CONSTANTS_ONLY
show explain for foo;
--echo #
--echo # MDEV-411: SHOW EXPLAIN: For dependent subquery EXPLAIN produces type=index, key, 'Using where; Using index',
--echo # while SHOW EXPLAIN says type=ALL, no key, 'Range checked for each record'
--echo #
CREATE TABLE t1 (a INT NOT NULL, KEY(a)) ENGINE=MyISAM;
INSERT INTO t1 VALUES (7),(0);
CREATE TABLE t2 (b INT NOT NULL) ENGINE=MyISAM;
INSERT INTO t2 VALUES (0),(8);
explain
SELECT SUM(b) FROM ( SELECT * FROM t1 ) AS alias1, t2
WHERE b <= ANY (
SELECT a FROM t1
WHERE a = b + SLEEP(0.2) OR a >= ( SELECT SUM(b) FROM t2 ));
set @show_explain_probe_select_id=1;
SET debug_dbug='+d,show_explain_probe_join_exec_start';
send
SELECT SUM(b) FROM ( SELECT * FROM t1 ) AS alias1, t2
WHERE b <= ANY (
SELECT a FROM t1
WHERE a = b + SLEEP(0.2) OR a >= ( SELECT SUM(b) FROM t2 ));
connection default;
--source include/wait_condition.inc
evalp show explain for $thr2;
connection con1;
reap;
SET debug_dbug=@old_debug;
DROP TABLE t1,t2;
drop table t0;
--echo #
--echo # MDEV-5148: Server crashes in print_explain on killing EXPLAIN EXTENDED
--echo #
create table t0 (a int not null);
insert into t0 values (0),(1),(2),(3),(4),(5),(6),(7),(8),(9);
create table t1 (a int, b int);
insert into t1 select a,a from t0;
create table t2 as select * from t1;
set @show_explain_probe_select_id=2;
SET debug_dbug='+d,show_explain_probe_best_ext_lim_search';
send
explain
select * from t0
where not exists ( select 1 from t1, t2 where t1.b=t2.b and t2.a=t0.a) and a is null;
connection default;
--source include/wait_condition.inc
evalp kill query $thr2;
connection con1;
--error ER_QUERY_INTERRUPTED
reap;
drop table t0,t1,t2;
--echo # End
connection default;
disconnect con1;
set debug_sync='RESET';
Reference in a new issue View git blame Copy permalink