when there are no up-to-date system tables to support it:
- initialize the scheduler before reporting "Ready for connections".
This ensures that warnings, if any, are printed before "Ready for
connections", and this message is not mangled.
- do not abort the scheduler if there are no system tables
- check the tables once at start up, remember the status and disable
the scheduler if the tables are not up to date.
If one attempts to use the scheduler with bad tables,
issue an error message.
- clean up the behaviour of the module under LOCK TABLES and pre-locking
mode
- make sure implicit commit of Events DDL works as expected.
- add more tests
Collateral clean ups in the events code.
This patch fixes Bug#23631 Events: SHOW VARIABLES doesn't work
when mysql.event is damaged
This patch corrects errors that occurred in a local manual merge as a result
of updating the local repository and includes changes necessary to correct
problems found during the recalculation of next execution of events in RBR.
Bug#27047[partial]: INFORMATION_SCHEMA table cannot have BIGINT \
fields
No Information_schema table has ever needed floating-point data
before. Transforming all floating point to a string and back to a
number causes a real data problem on Windows, where the libc may
pad the exponent with more leading zeroes than we expect and the
significant digits are truncated away.
This also makes interpreting an unimplemented type as a string into
a fatal error in debug builds. Thus, we will catch problems when we
try to use those types in new I_S tables.
BUG#26429: SHOW CREATE EVENT is incorrect for an event that
STARTS NOW()
BUG#26431: Impossible to re-create an event from backup if its
STARTS clause is in the past
WL#3698: Events: execution in local time zone
The problem was that local times specified by the user in AT, STARTS
and ENDS of CREATE EVENT/ALTER EVENT statement were converted to UTC,
and the original time zone was forgotten. This way, event scheduler
couldn't honor Daylight Saving Time shifts, and times shown to the
user were also in UTC. Additionally, CREATE EVENT didn't allow times
in the past, thus preventing straightforward event restoration from
old backups.
This patch reworks event scheduler time computations, performing them
in the time zone associated with the event. Also it allows times to
be in the past.
The patch adds time_zone column to mysql.event table.
NOTE: The patch is almost final, but the bug#9953 should be pushed
first.
This changeset adds replication of events and user-defined functions.
There are several bug reports involved in this change:
BUG#16421, BUG#17857, BUG#20384:
This patch modifies the mysql.events table to permit the addition of
another enum value for the status column. The column now has values
of ('DISABLED','SLAVESIDE_DISABLED','ENABLED'). A status of
SLAVESIDE_DISABLED is set on the slave during replication of events.
This enables users to determine which events werereplicated from the
master and to later enable them if they promote the slave to a master.
The CREATE, ALTER, and DROP statements are binlogged.
A new test was added for replication of events (rpl_events).
BUG#17671:
This patch modifies the code to permit logging of user-defined functions.
Note: this is the CREATE FUNCTION ... SONAME variety. A more friendly error
message to be displayed should a replicated user-defined function not be
found in the loadable library or if the library is missing from the
slave.The CREATE andDROP statements are binlogged. A new test was added
for replication of user-defined functions (rpl_udf).
The patch also adds a new column to the mysql.event table named
'originator' that is used to store the server_id of the server that
the event originated on. This enables users to promote a slave to a
master and later return the promoted slave to a slave and disable the
replicated events.
Different set of conditions is used to verify
the validity of index definitions over a GEOMETRY
column in ALTER TABLE and CREATE TABLE.
The difference was on how sub-keys notion validity
is checked.
Fixed by extending the CREATE TABLE condition to
support the cases allowed in ALTER TABLE.
Made the SHOW CREATE TABLE not to display spatial
indexes using the sub-key notion.
Different set of conditions is used to verify
the validity of index definitions over a GEOMETRY
column in ALTER TABLE and CREATE TABLE.
The difference was on how sub-keys notion validity
is checked.
Fixed by extending the CREATE TABLE condition to
support the cases allowed in ALTER TABLE.
Made the SHOW CREATE TABLE not to display spatial
indexes using the sub-key notion.
The problem was that some facilities (like CONVERT_TZ() function or
server HELP statement) may require implicit access to some tables in
'mysql' database. This access was done by ordinary means of adding
such tables to the list of tables the query is going to open.
However, if we issued LOCK TABLES before that, we would get "table
was not locked" error trying to open such implicit tables.
The solution is to treat certain tables as MySQL system tables, like
we already do for mysql.proc. Such tables may be opened for reading
at any moment regardless of any locks in effect. The cost of this is
that system table may be locked for writing only together with other
system tables, it is disallowed to lock system tables for writing and
have any other lock on any other table.
After this patch the following tables are treated as MySQL system
tables:
mysql.help_category
mysql.help_keyword
mysql.help_relation
mysql.help_topic
mysql.proc (it already was)
mysql.time_zone
mysql.time_zone_leap_second
mysql.time_zone_name
mysql.time_zone_transition
mysql.time_zone_transition_type
These tables are now opened with open_system_tables_for_read() and
closed with close_system_tables(), or one table may be opened with
open_system_table_for_update() and closed with close_thread_tables()
(the latter is used for mysql.proc table, which is updated as part of
normal MySQL server operation). These functions may be used when
some tables were opened and locked already.
NOTE: online update of time zone tables is not possible during
replication, because there's no time zone cache flush neither on LOCK
TABLES, nor on FLUSH TABLES, so the master may serve stale time zone
data from cache, while on slave updated data will be loaded from the
time zone tables.
can be specified
Currently MySQL allows one to specify what indexes to ignore during
join optimization. The scope of the current USE/FORCE/IGNORE INDEX
statement is only the FROM clause, while all other clauses are not
affected.
However, in certain cases, the optimizer
may incorrectly choose an index for sorting and/or grouping, and
produce an inefficient query plan.
This task provides the means to specify what indexes are
ignored/used for what operation in a more fine-grained manner, thus
making it possible to manually force a better plan. We do this
by extending the current IGNORE/USE/FORCE INDEX syntax to:
IGNORE/USE/FORCE INDEX [FOR {JOIN | ORDER | GROUP BY}]
so that:
- if no FOR is specified, the index hint will apply everywhere.
- if MySQL is started with the compatibility option --old_mode then
an index hint without a FOR clause works as in 5.0 (i.e, the
index will only be ignored for JOINs, but can still be used to
compute ORDER BY).
See the WL#3527 for further details.
Fixed compile-pentium64 scripts
Fixed wrong estimate of update_with_key_prefix in sql-bench
Merge bk-internal.mysql.com:/home/bk/mysql-5.1 into mysql.com:/home/my/mysql-5.1
Fixed unsafe define of uint4korr()
Fixed that --extern works with mysql-test-run.pl
Small trivial cleanups
This also fixes a bug in counting number of rows that are updated when we have many simultanous queries
Move all connection handling and command exectuion main loop from sql_parse.cc to sql_connection.cc
Split handle_one_connection() into reusable sub functions.
Split create_new_thread() into reusable sub functions.
Added thread_scheduler; Preliminary interface code for future thread_handling code.
Use 'my_thread_id' for internal thread id's
Make thr_alarm_kill() to depend on thread_id instead of thread
Make thr_abort_locks_for_thread() depend on thread_id instead of thread
In store_globals(), set my_thread_var->id to be thd->thread_id.
Use my_thread_var->id as basis for my_thread_name()
The above changes makes the connection we have between THD and threads more soft.
Added a lot of DBUG_PRINT() and DBUG_ASSERT() functions
Fixed compiler warnings
Fixed core dumps when running with --debug
Removed setting of signal masks (was never used)
Made event code call pthread_exit() (portability fix)
Fixed that event code doesn't call DBUG_xxx functions before my_thread_init() is called.
Made handling of thread_id and thd->variables.pseudo_thread_id uniform.
Removed one common 'not freed memory' warning from mysqltest
Fixed a couple of usage of not initialized warnings (unlikely cases)
Suppress compiler warnings from bdb and (for the moment) warnings from ndb
The crash happens because second filling of the same I_S table happens in
case of subselect with order by. table->sort.io_cache previously allocated
in create_sort_index() is deleted during second filling
(function get_schema_tables_result). There are two places where
I_S table can be filled: JOIN::exec and create_sort_index().
To fix the bug we should check if the table was already filled
in one of these places and skip processing of the table in second.
Removed a lot of compiler warnings
Removed not used variables, functions and labels
Initialize some variables that could be used unitialized (fatal bugs)
%ll -> %l
1) Two small windows cleanups for Archive.
2) Patch from Calvin for Falcon to be able to have its own I_S loaded. One example added for this, does hello world.
Problem: The Table_type column of "SHOW FULL TABLES" displayed
"ERROR" instead of "BASE TABLE" for tables having non-ascii
characters in their names.
Reason: tablename to filename encoding was missing, so
mysql_frm_type() tried to open a wrong file name.
Fix: adding tablename to filename encoding
