Add OPTION_GTID_BEGIN to applying side thread. This is needed to avoid
intermediate commits when CREATE TABLE AS SELECT is applied, causing
one more GTID to be consumed with respect to executing node.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
This change is to get rid of randomly failing tests, especially those
that reads random position of the binary log. From looking at the logs
it's clear that some failures is because of a read char (with value >= 128)
is converted to a big long value. Using uchar everywhere makes this much
less likely to happen.
Another benefit is that a lot of cast of char to uchar could be removed.
Other things:
- Removed some extra space before '=' and '+=' in assignments
- Fixed indentations and lines > 80 characters
- Replace '16' with 'element_size' (from class definition) in
Gtid_list_log_event()
All changes (except one) is of type
thd->transaction. -> thd->transaction->
thd->transaction points by default to 'thd->default_transaction'
This allows us to 'easily' have multiple active transactions for a
THD object, like when reading data from the mysql.proc table
Support for galera GTID consistency thru cluster. All nodes in cluster
should have same GTID for replicated events which are originating from cluster.
Cluster originating commands need to contain sequential WSREP GTID seqno
Ignore manual setting of gtid_seq_no=X.
In master-slave scenario where master is non galera node replicated GTID is
replicated and is preserved in all nodes.
To have this - domain_id, server_id and seqnos should be same on all nodes.
Node which bootstraps the cluster, to achieve this, sends domain_id and
server_id to other nodes and this combination is used to write GTID for events
that are replicated inside cluster.
Cluster nodes that are executing non replicated events are going to have different
GTID than replicated ones, difference will be visible in domain part of gtid.
With wsrep_gtid_domain_id you can set domain_id for WSREP cluster.
Functions WSREP_LAST_WRITTEN_GTID, WSREP_LAST_SEEN_GTID and
WSREP_SYNC_WAIT_UPTO_GTID now works with "native" GTID format.
Fixed galera tests to reflect this chances.
Add variable to manually update WSREP GTID seqno in cluster
Add variable to manipulate and change WSREP GTID seqno. Next command
originating from cluster and on same thread will have set seqno and
cluster should change their internal counter to it's value.
Behavior is same as using @@gtid_seq_no for non WSREP transaction.
* Collect and pass apply error data to provider
* Rollback failed transaction and continue operation if provider returns
SUCCESS
* MTR tests for inconsistency voting
Patch fixes two bugs:
1) BEGIN_TIMESTAMP of MYSQL.TRANSACTION_REGISTY is '0-0-0' on replication record insertion
2) BEGIN_TIMESTAMP equals COMMMIT_TIMESTAMP in MYSQL.TRANSACTION_REGISTRY
Fixed by calling THD::set_time() at appropriate places
These test can sporadically show mutex deadlock warnings between LOCK_wsrep_thd
and LOCK_thd_data mutexes. This means that these mutexes can be locked in opposite
order by different threads, and thus result in deadlock situation.
To fix such issue, the locking policy of these mutexes should be revised and
enforced to be uniform. However, a quick code review shows that the number of
lock/unlock operations for these mutexes combined is between 100-200, and all these
mutex invocations should be checked/fixed.
On the other hand, it turns out that LOCK_wsrep_thd is used for protecting access to
wsrep variables of THD (wsrep_conflict_state, wsrep_query_state), whereas LOCK_thd_data
protects query, db and mysys_var variables in THD. Extending LOCK_thd_data to protect
also wsrep variables looks like a viable solution, as there should not be a use case
where separate threads need simultaneous access to wsrep variables and THD data variables.
In this commit LOCK_wsrep_thd mutex is refactored to be replaced by LOCK_thd_data.
By bluntly replacing LOCK_wsrep_thd by LOCK_thd_data, will result in double locking
of LOCK_thd_data, and some adjustements have been performed to fix such situations.
This was done to get more information about where time is spent.
Now we can get proper timing for time spent in commit, rollback,
binlog write etc.
Following stages was added:
- Commit
- Commit_implicit
- Rollback
- Rollback implicit
- Binlog write
- Init for update
- This is used instead of "Init" for insert, update and delete.
- Staring cleanup
Following stages where changed:
- "Unlocking tables" stage reset stage to previous stage at end
- "binlog write" stage resets stage to previous stage at end
- "end" -> "end of update loop"
- "cleaning up" -> "Reset for next command"
- Added stage_searching_rows_for_update when searching for rows
to be deleted.
Other things:
- Renamed all stages to start with big letter (before there was no
consitency)
- Increased performance_schema_max_stage_classes from 150 to 160.
- Most of the test changes in performance schema comes from renaming of
stages.
- Removed duplicate output of variables and inital state in a lot of
performance schema tests.
This was done to make it easier to change a default value for a
performance variable without affecting all tests.
- Added start_server_variables.test to check configuration
- Removed some duplicate "closing tables" stages
- Updated position for "stage_init_update" and "stage_updating" for
delete, insert and update to be just before update loop (for more
exact timing).
- Don't set "Checking permissions" twice in a row.
- Remove stage_end stage from creating views (not done for create table
either).
- Updated default performance history size from 10 to 20 because of new
stages
- Ensure that ps_enabled is correct (to be used in a later patch)
For running the Galera tests, the variable my_disable_leak_check
was set to true in order to avoid assertions due to memory leaks
at shutdown.
Some adjustments due to MDEV-13625 (merge InnoDB tests from MySQL 5.6)
were performed. The most notable behaviour changes from 10.0 and 10.1
are the following:
* innodb.innodb-table-online: adjustments for the DROP COLUMN
behaviour change (MDEV-11114, MDEV-13613)
* innodb.innodb-index-online-fk: the removal of a (1,NULL) record
from the result; originally removed in MySQL 5.7 in the
Oracle Bug #16244691 fix
377774689b
* innodb.create-index-debug: disabled due to MDEV-13680
(the MySQL Bug #77497 fix was not merged from 5.6 to 5.7.10)
* innodb.innodb-alter-autoinc: MariaDB 10.2 behaves like MySQL 5.6/5.7,
while MariaDB 10.0 and 10.1 assign different values when
auto_increment_increment or auto_increment_offset are used.
Also MySQL 5.6/5.7 exhibit different behaviour between
LGORITHM=INPLACE and ALGORITHM=COPY, so something needs to be tested
and fixed in both MariaDB 10.0 and 10.2.
* innodb.innodb-wl5980-alter: disabled because it would trigger an
InnoDB assertion failure (MDEV-13668 may need additional effort in 10.2)
- Added sql/mariadb.h file that should be included first by files in sql
directory, if sql_plugin.h is not used (sql_plugin.h adds SHOW variables
that must be done before my_global.h is included)
- Removed a lot of include my_global.h from include files
- Removed include's of some files that my_global.h automatically includes
- Removed duplicated include's of my_sys.h
- Replaced include my_config.h with my_global.h
Merged from mysql-wsrep-bugs following:
GCF-1058 MTR test galera.MW-86 fails on repeated runs
Wait for the sync point sync.wsrep_apply_cb to be reached before
executing the test and clearing the debug flag sync.wsrep_apply_cb.
The race scenario:
Intended behavior:
node2: set sync.wsrep_apply_cb in order to start waiting in the background INSERT
node1: INSERT start
node2 (background): INSERT start
node1: INSERT end
node2: send signal to background INSERT: "stop waiting and continue executing"
node2: clear sync.wsrep_apply_cb as no longer needed
node2 (background): consume the signal
node2 (background): INSERT end
node2: DROP TABLE
node2: check no pending signals are left - ok
What happens occasionally (unexpected):
node2: set sync.wsrep_apply_cb in order to start waiting in the background INSERT
node1: INSERT start
node2 (background): INSERT start
node1: INSERT end
// The background INSERT still has _not_ reached the place where it starts
// waiting for the signal:
// DBUG_EXECUTE_IF("sync.wsrep_apply_cb", "now wait_for...");
node2: send signal to background INSERT: "stop waiting and continue executing"
node2: clear sync.wsrep_apply_cb as no longer needed
// The background INSERT reaches DBUG_EXECUTE_IF("sync.wsrep_apply_cb", ...)
// but sync.wsrep_apply_cb has already been cleared and the "wait" code is not
// executed. The signal remains unconsumed.
node2 (background): INSERT end
node2: DROP TABLE
node2: check no pending signals are left - failure, signal.wsrep_apply_cb is
pending (not consumed)
Remove MW-360 test case as it is not intended for MariaDB (uses
MySQL GTID).
Applier does not reset thd->wsrep_apply_toi if applier thread decides
to exit by setting 'exit= true'. The problem is that galera side may
decide not to kill the applier thread: for instance if we try to
SET wsrep_slave_threads = 0; then galera refuses to kill the last
applier thread. If this happens we are left with a thd which has not
been reset to the initial state.
This patch ensures that the thd is reset regardless of the applier
thread exiting or not.
... causes MariaDB to crash
On error, the wsrep replication buffer (binlog) is dumped to a file
to aid investigations. In order to also include the binlog header,
FDLE object is also needed. This object is only available for wsrep-
threads.
Fix: Instantiate an FDLE object for non-wsrep threads.
This changes variable wsrep_max_ws_size so that its value
is linked to the value of provider option repl.max_ws_size.
That is, changing the value of variable wsrep_max_ws_size
will change the value of provider option repl.max_ws_size,
and viceversa.
The writeset size limit is always enforced in the provider,
regardless of which option is used.
MDEV-10134 Add full support for DEFAULT
- Added support for using tables with MySQL 5.7 virtual fields,
including MySQL 5.7 syntax
- Better error messages also for old cases
- CREATE ... SELECT now also updates timestamp columns
- Blob can now have default values
- Added new system variable "check_constraint_checks", to turn of
CHECK constraint checking if needed.
- Removed some engine independent tests in suite vcol to only test myisam
- Moved some tests from 'include' to 't'. Should some day be done for all tests.
- FRM version increased to 11 if one uses virtual fields or constraints
- Changed to use a bitmap to check if a field has got a value, instead of
setting HAS_EXPLICIT_VALUE bit in field flags
- Expressions can now be up to 65K in total
- Ensure we are not refering to uninitialized fields when handling virtual fields or defaults
- Changed check_vcol_func_processor() to return a bitmap of used types
- Had to change some functions that calculated cached value in fix_fields to do
this in val() or getdate() instead.
- store_now_in_TIME() now takes a THD argument
- fill_record() now updates default values
- Add a lookahead for NOT NULL, to be able to handle DEFAULT 1+1 NOT NULL
- Automatically generate a name for constraints that doesn't have a name
- Added support for ALTER TABLE DROP CONSTRAINT
- Ensure that partition functions register virtual fields used. This fixes
some bugs when using virtual fields in a partitioning function
mysqld maintains a list of TABLE objects for all temporary
tables created within a session in THD. Here each table is
represented by a TABLE object.
A query referencing a particular temporary table for more
than once, however, failed with ER_CANT_REOPEN_TABLE error
because a TABLE_SHARE was allocate together with the TABLE,
so temporary tables always had only one TABLE per TABLE_SHARE.
This patch lift this restriction by separating TABLE and
TABLE_SHARE objects and storing TABLE_SHAREs for temporary
tables in a list in THD, and TABLEs in a list within their
respective TABLE_SHAREs.
- Removes useless call to wsrep_xid_init() in wsrep_apply_events().
Transaction's xid is already initialized at that point.
- Adds call to wsrep_set_SE_checkpoint() for committing TOI events
in the applier side.
- Includes test case that reproduced the issue.
1. factored XID-related functions to a separate wsrep_xid.cc unit.
2. refactored them to take refrences instead of pointers where appropriate
3. implemented wsrep_get/set_SE_position to take wsrep_uuid_t and wsrep_seqno_t instead of XID
4. call wsrep_set_SE_position() in wsrep_sst_received() to reinitialize SE checkpoint after SST was received, avoid assert() in setting code by first checking current position.
Annotate_rows event needs to be preserved until the last Rows event has
been applied because after it has been applied thd->query points to the
query stored inside this event.
