update statements
Only SELECT statements report any examined rows in the slow
log. Slow UPDATE, DELETE and INSERT statements report 0 rows
examined, unless the statement has a condition including a
SELECT substatement.
This patch adds counting of examined rows for the UPDATE and
DELETE statements. An INSERT ... VALUES statement will still
not report any rows as examined.
to cleanup open connections
It was possible to UNINSTALL storage engine plugin when binding
between THD object and storage engine is still active (e.g. in
the middle of transaction).
To avoid unclean deactivation (uninstall) of storage engine plugin
in the middle of transaction, additional storage engine plugin
lock is acquired by thd_set_ha_data().
If ha_data is not null and storage engine plugin was not locked
by thd_set_ha_data() in this connection before, storage engine
plugin gets locked.
If ha_data is null and storage engine plugin was locked by
thd_set_ha_data() in this connection before, storage engine
plugin lock gets released.
If handlerton::close_connection() didn't reset ha_data, server does
it immediately after calling handlerton::close_connection().
Note that this is just a framework fix, storage engines must switch
to thd_set_ha_data() from thd_ha_data() if they want to see fit.
CHECK_FIELD_IGNORE was treated as CHECK_FIELD_ERROR_FOR_NULL;
UPDATE...SET...NULL on NOT NULL fields behaved differently after
a trigger.
Now distinguishes between IGNORE and ERROR_FOR_NULL and save/restores
check-field options.
CHECK_FIELD_IGNORE was treated as CHECK_FIELD_ERROR_FOR_NULL;
UPDATE...SET...NULL on NOT NULL fields behaved differently after
a trigger.
Now distinguishes between IGNORE and ERROR_FOR_NULL and save/restores
check-field options.
error causes debug assertion
The IGNORE option of the multiple-table UPDATE command was
not intended to suppress errors caused by the
sql_safe_updates mode. This flag will raise an error if the
execution of UPDATE does not use a key for row retrieval,
and should continue do so regardless of the IGNORE option.
However the implementation of IGNORE does not support
exceptions to the rule; it always converts errors to
warnings and cannot be extended. The Internal_error_handler
interface offers the infrastructure to handle individual
errors, making sure that the error raised by
sql_safe_updates is not silenced.
Fixed by implementing an Internal_error_handler and using it
for UPDATE IGNORE commands.
It is well-known that due to concurrency issues, a slave can become
inconsistent when a transaction contains updates to both transaction and
non-transactional tables in statement and mixed modes.
In a nutshell, the current code-base tries to preserve causality among the
statements by writing non-transactional statements to the txn-cache which
is flushed upon commit. However, modifications done to non-transactional
tables on behalf of a transaction become immediately visible to other
connections but may not immediately get into the binary log and therefore
consistency may be broken.
In general, it is impossible to automatically detect causality/dependency
among statements by just analyzing the statements sent to the server. This
happen because dependency may be hidden in the application code and it is
necessary to know a priori all the statements processed in the context of
a transaction such as in a procedure. Moreover, even for the few cases that
we could automatically address in the server, the computation effort
required could make the approach infeasible.
So, in this patch we introduce the option
- "--binlog-direct-non-transactional-updates" that can be used to bypass
the current behavior in order to write directly to binary log statements
that change non-transactional tables.
Actually there is two different bugs.
The first one caused crash on queries with WHERE condition over views
containing WHERE condition. A wrong check for prepared statement phase led
to items for view fields being allocated in the execution memory and freed
at the end of execution. Thus the optimized WHERE condition refers to
unallocated memory on the second execution and server crashed.
The second one caused by the Item_cond::compile function not saving changes
it made to the item tree. Thus on the next execution changes weren't
reverted and server crashed on dereferencing of unallocated space.
The new helper function called is_stmt_prepare_or_first_stmt_execute
is added to the Query_arena class.
The find_field_in_view function now uses
is_stmt_prepare_or_first_stmt_execute() to check whether
newly created view items should be freed at the end of the query execution.
The Item_cond::compile function now saves changes it makes to item tree.
If a thread is killed in the server, we throw "shutdown" only if one is actually in
progress; otherwise, we throw "query interrupted".
Control-C in the mysql command-line client is "incremental" now.
First Control-C sends KILL QUERY (when connected to 5.0+ server, otherwise, see next)
Next Control-C sends KILL CONNECTION
Next Control-C aborts client.
As the first two steps only pertain to an existing query,
Control-C will abort the client right away if no query is running.
client will give more detailed/consistent feedback on Control-C now.
Implemented the server infrastructure for the fix:
1. Added a function LEX_STRING *thd_query_string(THD) to return
a LEX_STRING structure instead of char *.
This is the function that must be called in innodb instead of
thd_query()
2. Did some encapsulation in THD : aggregated thd_query and
thd_query_length into a LEX_STRING and made accessor and mutator
methods for easy code updating.
3. Updated the server code to use the new methods where applicable.
columns without where/group
Simple SELECT with implicit grouping used to return many rows if
the query was ordered by the aggregated column in the SELECT
list. This was incorrect because queries with implicit grouping
should only return a single record.
The problem was that when JOIN:exec() decided if execution needed
to handle grouping, it was assumed that sum_func_count==0 meant
that there were no aggregate functions in the query. This
assumption was not correct in JOIN::exec() because the aggregate
functions might have been optimized away during JOIN::optimize().
The reason why queries without ordering behaved correctly was
that sum_func_count is only recalculated if the optimizer chooses
to use temporary tables (which it does in the ordered case).
Hence, non-ordered queries were correctly treated as grouped.
The fix for this bug was to remove the assumption that
sum_func_count==0 means that there is no need for grouping. This
was done by introducing variable "bool implicit_grouping" in the
JOIN object.
Backport from 6.0 to 5.1.
Only those sync points are included, which are used in debug_sync.test.
The Debug Sync Facility allows to place synchronization points
in the code:
open_tables(...)
DEBUG_SYNC(thd, "after_open_tables");
lock_tables(...)
When activated, a sync point can
- Send a signal and/or
- Wait for a signal
Nomenclature:
- signal: A value of a global variable that persists
until overwritten by a new signal. The global
variable can also be seen as a "signal post"
or "flag mast". Then the signal is what is
attached to the "signal post" or "flag mast".
- send a signal: Assign the value (the signal) to the global
variable ("set a flag") and broadcast a
global condition to wake those waiting for
a signal.
- wait for a signal: Loop over waiting for the global condition until
the global value matches the wait-for signal.
Please find more information in the top comment in debug_sync.cc
or in the worklog entry.
trigger, merge table
The problem with break statements is that they have very
local effects. Hence a break statement within the inner loop
of a nested-loops join caused execution to proceed to the
next table even though a serious error occurred. The problem
was fixed by breaking out the inner loop into its own
method. The change empowers all errors to terminate the
execution.
The errors that will now halt multi-DELETE execution
altogether are
- triggers returning errors
- handler errors
- server being killed
procedures causes crashes!
The problem of that bugreport was mostly fixed by the
patch for bug 38691.
However, attached test case focused on another crash or
valgrind warning problem: SHOW PROCESSLIST query accesses
freed memory of SP instruction that run in a parallel
connection.
Changes of thd->query/thd->query_length in dangerous
places have been guarded with the per-thread
LOCK_thd_data mutex (the THD::LOCK_delete mutex has been
renamed to THD::LOCK_thd_data).
when used with --tab
1) New syntax: added CHARACTER SET clause to the
SELECT ... INTO OUTFILE (to complement the same clause in
LOAD DATA INFILE).
mysqldump is updated to use this in --tab mode.
2) ESCAPED BY/ENCLOSED BY field parameters are documented as
accepting CHAR argument, however SELECT .. INTO OUTFILE
silently ignored rests of multisymbol arguments.
For the symmetrical behavior with LOAD DATA INFILE the
server has been modified to fail with the same error:
ERROR 42000: Field separator argument is not what is
expected; check the manual
3) Current LOAD DATA INFILE recognizes field/line separators
"as is" without converting from client charset to data
file charset. So, it is supposed, that input file of
LOAD DATA INFILE consists of data in one charset and
separators in other charset. For the compatibility with
that [buggy] behaviour SELECT INTO OUTFILE implementation
has been saved "as is" too, but the new warning message
has been added:
Non-ASCII separator arguments are not fully supported
This message warns on field/line separators that contain
non-ASCII symbols.
variable. The problem was that THD::connect_utime could be
used without being initialized when the main thread is used
to handle connections (--thread-handling=no-threads).
The problem is that when a optimization of read-only transactions
(bypass 2-phase commit) was implemented, it removed the code that
reseted the XID once a transaction wasn't active anymore:
sql/sql_parse.cc:
- bzero(&thd->transaction.stmt, sizeof(thd->transaction.stmt));
- if (!thd->active_transaction())
- thd->transaction.xid_state.xid.null();
+ thd->transaction.stmt.reset();
This mostly worked fine as the transaction commit and rollback
functions (in handler.cc) reset the XID once the transaction is
ended. But those functions wouldn't reset the XID in case of
a empty transaction, leading to a assertion when a new starting
a new XA transaction.
The solution is to ensure that the XID state is reset when empty
transactions are ended (by either commit or rollback). This is
achieved by reorganizing the code so that the transaction cleanup
routine is invoked whenever a transaction is ended.
Make the caller of Query_log_event, Execute_load_log_event
constructors and THD::binlog_query to provide the error code
instead of having the constructors to figure out the error code.
MySQL crashes if a user without proper privileges attempts to create a procedure.
The crash happens because more than one error state is pushed onto the Diagnostic
area. In this particular case the user is denied to implicitly create a new user
account with the implicitly granted privileges ALTER- and EXECUTE ROUTINE.
The new account is needed if the original user account contained a host mask.
A user account with a host mask is a distinct user account in this context.
An alternative would be to first get the most permissive user account which
include the current user connection and then assign privileges to that
account. This behavior change is considered out of scope for this bug patch.
The implicit assignment of privileges when a user creates a stored routine is a
considered to be a feature for user convenience and as such it is not
a critical operation. Any failure to complete this operation is thus considered
non-fatal (an error becomes a warning).
The patch back ports a stack implementation of the internal error handler interface.
This enables the use of multiple error handlers so that it is possible to intercept
and cancel errors thrown by lower layers. This is needed as a error handler already
is used in the call stack emitting the errors which needs to be converted.
due to name_const substitution
Problem:
"In general, statements executed within a stored procedure
are written to the binary log using the same rules that
would apply were the statements to be executed in standalone
fashion. Some special care is taken when logging procedure
statements because statement execution within procedures
is not quite the same as in non-procedure context".
For example, each reference to a local variable in SP's
statements is replaced by NAME_CONST(var_name, var_value).
Queries like
"CREATE TABLE ... SELECT FUNC(local_var ..."
are logged as
"CREATE TABLE ... SELECT FUNC(NAME_CONST("local_var", var_value) ..."
that leads to differrent field names and
might result in "Incorrect column name" if var_value is long enough.
Fix: in 5.x we'll issue a warning in such a case.
In 6.0 we should get rid of NAME_CONST().
Note: this issue and change should be described in the documentation
("Binary Logging of Stored Programs").
Fine-tuning. Broke out comparison into method by
suggestion of Davi. Clarified comments. Reverting
test-case which I find too brittle; proper test
case in 5.1+.
When binlog_format is STATEMENT and the statement is unsafe before,
the unsafe warning/error message was issued without checking
whether the SQL_LOG_BIN was turned on or not.
Fixed with adding a sql_log_bin_toplevel flag in THD to check
whether SQL_LOG_BIN is ON in current session whatever the current is in sp or not.
- Add support for setting it as a server commandline argument
- Add support for those switches:
= no_index_merge
= no_index_merge_union
= no_index_merge_sort_union
= no_index_merge_intersection
- Remove bothersome warning messages. This change focuses on the warnings
that are covered by the ignore file: support-files/compiler_warnings.supp.
- Strings are guaranteed to be max uint in length
conflicts:
Text conflict in client/mysqltest.cc
Text conflict in mysql-test/include/wait_until_connected_again.inc
Text conflict in mysql-test/lib/mtr_report.pm
Text conflict in mysql-test/mysql-test-run.pl
Text conflict in mysql-test/r/events_bugs.result
Text conflict in mysql-test/r/log_state.result
Text conflict in mysql-test/r/myisam_data_pointer_size_func.result
Text conflict in mysql-test/r/mysqlcheck.result
Text conflict in mysql-test/r/query_cache.result
Text conflict in mysql-test/r/status.result
Text conflict in mysql-test/suite/binlog/r/binlog_index.result
Text conflict in mysql-test/suite/binlog/r/binlog_innodb.result
Text conflict in mysql-test/suite/rpl/r/rpl_packet.result
Text conflict in mysql-test/suite/rpl/t/rpl_packet.test
Text conflict in mysql-test/t/disabled.def
Text conflict in mysql-test/t/events_bugs.test
Text conflict in mysql-test/t/log_state.test
Text conflict in mysql-test/t/myisam_data_pointer_size_func.test
Text conflict in mysql-test/t/mysqlcheck.test
Text conflict in mysql-test/t/query_cache.test
Text conflict in mysql-test/t/rpl_init_slave_func.test
Text conflict in mysql-test/t/status.test
BUG#39325 Server crash inside MYSQL_LOG::purge_first_log halts replicaiton
The patch reverses the order of the purging and updating events for log and relay-log.info/index files respectively.
This solves the problem of having holes caused by crashes happening between updating info/index files and purging logs.
NOTE: This is a combined patch for BUG#38826 and BUG#39325. This patch is based on bugteam tree and takes into account reviewers suggestions.
