Commit 536215e32f in MariaDB Server 10.3.1
introduced the compiler flag (not cmake option) DBUG_ASSERT_AS_PRINTF
that converts DBUG_ASSERT in non-debug builds into printouts.
For debug builds, it could be useful to be able to convert DBUG_ASSERT
into a warning or error printout, to allow execution to continue.
This would allow debug builds to be used for reproducing hard failures
that occur with release builds.
my_assert: A Boolean flag (set by default), tied to the new option
debug_assert that is available on debug builds only.
When set, DBUG_ASSERT() will invoke assert(), like it did until now.
When unset, DBUG_ASSERT() will invoke fprintf(stderr, ...)
with the file name, line number and assertion expression.
- Added mariadb-# to load_default_groups to all mariadb-# scripts and
mariadb-binaries.
- Added mariadbd and mariadbd-"version" to load_default_groups for the
mysqld/mariadb server
- Added mariadb-client to load_default_groups for the mysql/mariadb client
Other things
- Ignored mysql-test/lib/My/SafeProcess/wsrep_check_version
- mysql_install_db will now automatically detect if run from srcdir
MDEV-19486 and one more similar bug appeared because handler::write_row() interface
welcomes to modify buffer by storage engine. But callers are not ready for that
thus bugs are possible in future.
handler::write_row():
handler::ha_write_row(): make argument const
On clang, use __builtin_readcyclecounter() when available.
Hinted by Sergey Vojtovich. (This may lead to runtime failure
on ARM systems. The hardware should be available on ARMv8 (AArch64),
but access to it may require special privileges.)
We remove support for the proprietary Sun Microsystems compiler,
and rely on clang or the __GNUC__ assembler syntax instead.
For now, we retain support for IA-64 (Itanium) and 32-bit SPARC,
even though those platforms are likely no longer widely used.
We remove support for clock_gettime(CLOCK_SGI_CYCLE),
because Silicon Graphics ceased supporting IRIX in December 2013.
This was the only cycle timer interface available for MIPS.
On PowerPC, we rely on the GCC 4.8 __builtin_ppc_get_timebase()
(or clang __builtin_readcyclecounter()), which should be equivalent
to the old assembler code on both 64-bit and 32-bit targets.
Starting with the Intel Skylake microarchitecture, the PAUSE
instruction latency is about 140 clock cycles instead of earlier 10.
On AMD processors, the latency could be 10 or 50 clock cycles,
depending on microarchitecture.
Because of this big range of latency, let us scale the loops around
the PAUSE instruction based on timing results at server startup.
my_cpu_relax_multiplier: New variable: How many times to invoke PAUSE
in a loop. Only defined for IA-32 and AMD64.
my_cpu_init(): Determine with RDTSC the time to run 16 PAUSE instructions
in two unrolled loops according, and based on the quicker of the two
runs, initialize my_cpu_relax_multiplier. This form of calibration was
suggested by Mikhail Sinyavin from Intel.
LF_BACKOFF(), ut_delay(): Use my_cpu_relax_multiplier when available.
ut_delay(): Define inline in my_cpu.h.
UT_COMPILER_BARRIER(): Remove. This does not seem to have any effect,
because in our ut_delay() implementation, no computations are being
performed inside the loop. The purpose of UT_COMPILER_BARRIER() was to
prohibit the compiler from reordering computations. It was not
emitting any code.
cmake -DCMAKE_C_COMPILER=clang -DCMAKE_CXX_COMPILER=clang++ -DCMAKE_BUILD_TYPE=Debug
Maintainer mode makes all warnings errors. This patch fix warnings. Mostly about
deprecated `register` keyword.
Too much warnings came from Mroonga and I gave up on it.
Restore the detection of default charset in command line utilities.
It worked up to 10.1, but was broken by Connector/C.
Moved code for detection of default charset from sql-common/client.c
to mysys, and make command line utilities to use this code if charset
was not specified on the command line.
Server and command line tools now support option --tls_version to specify the
TLS version between client and server. Valid values are TLSv1.0, TLSv1.1, TLSv1.2, TLSv1.3
or a combination of them. E.g.
--tls_version=TLSv1.3
--tls_version=TLSv1.2,TLSv1.3
In case there is a gap between versions, the lowest version will be used:
--tls_version=TLSv1.1,TLSv1.3 -> Only TLSv1.1 will be available.
If the used TLS library doesn't support the specified TLS version, it will use
the default configuration.
Limitations:
SSLv3 is not supported. The default configuration doesn't support TLSv1.0 anymore.
TLSv1.3 protocol currently is only supported by OpenSSL 1.1.0 (client and server) and
GnuTLS 3.6.5 (client only).
Overview of TLS implementations and protocols
Server:
+-----------+-----------------------------------------+
| Library | Supported TLS versions |
+-----------+-----------------------------------------+
| WolfSSL | TLSv1.1, TLSv1,2 |
+-----------+-----------------------------------------+
| OpenSSL | (TLSv1.0), TLSv1.1, TLSv1,2, TLSv1.3 |
+-----------+-----------------------------------------+
| LibreSSL | (TLSv1.0), TLSv1.1, TLSv1,2, TLSv1.3 |
+-----------+-----------------------------------------+
Client (MariaDB Connector/C)
+-----------+-----------------------------------------+
| Library | Supported TLS versions |
+-----------+-----------------------------------------+
| GnuTLS | (TLSv1.0), TLSv1.1, TLSv1.2, TLSv1.3 |
+-----------+-----------------------------------------+
| Schannel | (TLSv1.0), TLSv1.1, TLSv1.2 |
+-----------+-----------------------------------------+
| OpenSSL | (TLSv1.0), TLSv1.1, TLSv1,2, TLSv1.3 |
+-----------+-----------------------------------------+
| LibreSSL | (TLSv1.0), TLSv1.1, TLSv1,2, TLSv1.3 |
+-----------+-----------------------------------------+
Using different recommended speedup options for WolfSSL.
- Enable x64 assembly code on Intel.
- in my_crypt.cc, align EVP_CIPHER_CTX buffer, since some members need
alignment of 16 (for AESNI instructions), when assembler is enabled.
- Adjust MY_AES_CTX_SIZE
- Enable fastmath in wolfssl (large integer math).
This patch complements the patch that fixes bug MDEV-18479.
This patch takes care of possible overflow when calculating the
estimated number of rows in a materialized derived table / view.
- Add new submodule for WolfSSL
- Build and use wolfssl and wolfcrypt instead of yassl/taocrypt
- Use HAVE_WOLFSSL instead of HAVE_YASSL
- Increase MY_AES_CTX_SIZE, to avoid compile time asserts in my_crypt.cc
(sizeof(EVP_CIPHER_CTX) is larger on WolfSSL)
This patch is for MEM_ROOT only.
In debug mode add 8 byte of poisoned memory before every allocated chunk.
On the right of every chunk there will be either 1-7 trailing poisoned bytes, or
next chunk's redzone, or poisoned non allocated memory or redzone of a
malloc()ed buffer.
Some places didn't match the previous rules, making the Floor
address wrong.
Additional sed rules:
sed -i -e 's/Place.*Suite .*, Boston/Street, Fifth Floor, Boston/g'
sed -i -e 's/Suite .*, Boston/Fifth Floor, Boston/g'
This commit is based on the work of Michal Schorm, rebased on the
earliest MariaDB version.
Th command line used to generate this diff was:
find ./ -type f \
-exec sed -i -e 's/Foundation, Inc., 59 Temple Place, Suite 330, Boston, /Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, /g' {} \; \
-exec sed -i -e 's/Foundation, Inc. 59 Temple Place.* Suite 330, Boston, /Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, /g' {} \; \
-exec sed -i -e 's/MA.*.....-1307.*USA/MA 02110-1335 USA/g' {} \; \
-exec sed -i -e 's/Foundation, Inc., 59 Temple/Foundation, Inc., 51 Franklin/g' {} \; \
-exec sed -i -e 's/Place, Suite 330, Boston, MA.*02111-1307.*USA/Street, Fifth Floor, Boston, MA 02110-1335 USA/g' {} \; \
-exec sed -i -e 's/MA.*.....-1307/MA 02110-1335/g' {} \;
With MAX_INDEXIES=64(default), key_map=Bitmap<64> is just a wrapper around
ulonglong and thus "trivial" (can be bzero-ed, or memcpy-ed, and stays
valid still)
With MAX_INDEXES=128, key_map = Bitmap<128> is not a "trivial" type
anymore. The implementation uses MY_BITMAP, and MY_BITMAP contains pointers
which make Bitmap invalid, when it is memcpy-ed/bzero-ed.
The problem in 10.4 is that there are many new key_map members, inside TABLE
or KEY, and those are often memcopied and bzeroed
The fix makes Bitmap "trivial", by inlining most of MY_BITMAP functionality.
pointers/heap allocations are not used anymore.
