Problem: If INSERT is immediately followed by SELECT in another thread,
the newly inserted rows may not be returned by the SELECT statement, if
ENGINE=myisam and @@concurrent_insert=1. This caused sporadic errors in
rpl_insert_id.
Fix: The test now uses ENGINE=$engine_type when creating tables (so that
innodb is used). It also turns off @@concurrent_insert around the critical
place, so that it works if someone in the future writes a test that sets
$engine_type=myisam before sourcing extra/rpl_tests/rpl_insert_id.test.
It also adds ORDER BY to all SELECTs so that the result is deterministic.
The bug allow multiple executing transactions working with non-transactional
to interfere with each others by interleaving the events of different trans-
actions.
Bug is fixed by writing non-transactional events to the transaction cache and
flushing the cache to the binary log at statement commit. To mimic the behavior
of normal statement-based replication, we flush the transaction cache in row-
based mode when there is no committed statements in the transaction cache,
which means we are committing the first one. This means that it will be written
to the binary log as a "mini-transaction" with just the rows for the statement.
Note that the changes here does not take effect when building the server with
HAVE_TRANSACTIONS set to false, but it is not clear if this was possible before
this patch either.
For row-based logging, we also have that when AUTOCOMMIT=1, the code now always
generates a BEGIN/COMMIT pair for single statements, or BEGIN/ROLLBACK pair in the
case of non-transactional changes in a statement that was rolled back. Note that
for the case where changes to a non-transactional table causes a rollback due
to error, the statement will now be logged with a BEGIN/ROLLBACK pair, even
though some changes has been committed to the non-transactional table.
There was a failure in that show slave status displayed a wrong message
when slave stopped at processing a row event inserting to a default-less
column.
The problem seem to have ceased after recent fixes in rbr code.
However, the test was not updated to carry testing of the case commented-out.
Uncommenting and editing the test.
Notice, Bug#23907 is most probably a duplicate of this one.
irrelevant to execute since the charset information does not
affect replication for row-based replication. The row-based
versions of the tests were removed, and the statement-based
version of the test was made executable by all three modes.
This involves removing any lines that causes the test to be
dependent on the contents of the binary log, and instead we
just check that the replication works as it should.
rpl_ndb_rep_ignore
Reason: previous test, rpl_ndb_2multi_eng, does not sync slave with master
after cleanup, so tables are sometimes left on slave
Fix: sync_slave_with_master
The error message due to lack of the default value for an extra field
was not as informative as it should be.
Fixed with improving the scheme of gathering, propagating and reporting
errors in applying rows events.
The scheme is in the following.
Any kind of error of processing of a row event incidents are to be
registered with my_error().
In the end Rows_log_event::do_apply_event() invokes rli->report() with the
message to display consisting of all the errors.
This mimics `show warnings' displaying.
A simple test checks three errors in processing an event.
Two hunks - a user level error and pushing it into the list -
have been devoted to already fixed Bug@31702.
Some open issues relating to this artifact listed on BUG@21842 page and
on WL@3679.
Todo: to synchronize the statement in the tests comments on Update and Delete
events may not stop when an extra field does not have a default with wl@3228 spec.
columns (default datatype value is assigned).
The mysql_update function has been modified to generate
an error when trying to set a NOT NULL field to NULL rather than a warning
in the set_field_to_null_with_conversions function.
without PK
Bug#31609 Not all RBR slave errors reported as errors
bug#32468 delete rows event on a table with foreign key constraint fails
The first two bugs comprise idempotency issues.
First, there was no error code reported under conditions of the bug
description although the slave sql thread halted.
Second, executions were different with and without presence of prim key in
the table.
Third, there was no way to instruct the slave whether to ignore an error
and skip to the following event or to halt.
Fourth, there are handler errors which might happen due to idempotent
applying of binlog but those were not listed among the "idempotent" error
list.
All the named issues are addressed.
Wrt to the 3rd, there is the new global system variable, changeble at run
time, which controls the slave sql thread behaviour.
The new variable allows further extensions to mimic the sql_mode
session/global variable.
To address the 4th, the new bug#32468 had to be fixed as it was staying
in the way.
DROP DATABASE statement writes changes to mysql.proc table under RBR
When replicating a DROP DATABASE statement with a database holding
stored procedures, the changes to the mysql.proc table was recorded
in the binary log under row-based replication.
With this patch, the thread uses statement-logging format for the
duration of the DROP DATABASE statement. The logging format is
(already) reset at the end of the statement, so no additional code
for resetting the logging format is necessary.
corrupts a MERGE table
Bug 26867 - LOCK TABLES + REPAIR + merge table result in
memory/cpu hogging
Bug 26377 - Deadlock with MERGE and FLUSH TABLE
Bug 25038 - Waiting TRUNCATE
Bug 25700 - merge base tables get corrupted by
optimize/analyze/repair table
Bug 30275 - Merge tables: flush tables or unlock tables
causes server to crash
Bug 19627 - temporary merge table locking
Bug 27660 - Falcon: merge table possible
Bug 30273 - merge tables: Can't lock file (errno: 155)
The problems were:
Bug 26379 - Combination of FLUSH TABLE and REPAIR TABLE
corrupts a MERGE table
1. A thread trying to lock a MERGE table performs busy waiting while
REPAIR TABLE or a similar table administration task is ongoing on
one or more of its MyISAM tables.
2. A thread trying to lock a MERGE table performs busy waiting until all
threads that did REPAIR TABLE or similar table administration tasks
on one or more of its MyISAM tables in LOCK TABLES segments do UNLOCK
TABLES. The difference against problem #1 is that the busy waiting
takes place *after* the administration task. It is terminated by
UNLOCK TABLES only.
3. Two FLUSH TABLES within a LOCK TABLES segment can invalidate the
lock. This does *not* require a MERGE table. The first FLUSH TABLES
can be replaced by any statement that requires other threads to
reopen the table. In 5.0 and 5.1 a single FLUSH TABLES can provoke
the problem.
Bug 26867 - LOCK TABLES + REPAIR + merge table result in
memory/cpu hogging
Trying DML on a MERGE table, which has a child locked and
repaired by another thread, made an infinite loop in the server.
Bug 26377 - Deadlock with MERGE and FLUSH TABLE
Locking a MERGE table and its children in parent-child order
and flushing the child deadlocked the server.
Bug 25038 - Waiting TRUNCATE
Truncating a MERGE child, while the MERGE table was in use,
let the truncate fail instead of waiting for the table to
become free.
Bug 25700 - merge base tables get corrupted by
optimize/analyze/repair table
Repairing a child of an open MERGE table corrupted the child.
It was necessary to FLUSH the child first.
Bug 30275 - Merge tables: flush tables or unlock tables
causes server to crash
Flushing and optimizing locked MERGE children crashed the server.
Bug 19627 - temporary merge table locking
Use of a temporary MERGE table with non-temporary children
could corrupt the children.
Temporary tables are never locked. So we do now prohibit
non-temporary chidlren of a temporary MERGE table.
Bug 27660 - Falcon: merge table possible
It was possible to create a MERGE table with non-MyISAM children.
Bug 30273 - merge tables: Can't lock file (errno: 155)
This was a Windows-only bug. Table administration statements
sometimes failed with "Can't lock file (errno: 155)".
These bugs are fixed by a new implementation of MERGE table open.
When opening a MERGE table in open_tables() we do now add the
child tables to the list of tables to be opened by open_tables()
(the "query_list"). The children are not opened in the handler at
this stage.
After opening the parent, open_tables() opens each child from the
now extended query_list. When the last child is opened, we remove
the children from the query_list again and attach the children to
the parent. This behaves similar to the old open. However it does
not open the MyISAM tables directly, but grabs them from the already
open children.
When closing a MERGE table in close_thread_table() we detach the
children only. Closing of the children is done implicitly because
they are in thd->open_tables.
For more detail see the comment at the top of ha_myisammrg.cc.
Changed from open_ltable() to open_and_lock_tables() in all places
that can be relevant for MERGE tables. The latter can handle tables
added to the list on the fly. When open_ltable() was used in a loop
over a list of tables, the list must be temporarily terminated
after every table for open_and_lock_tables().
table_list->required_type is set to FRMTYPE_TABLE to avoid open of
special tables. Handling of derived tables is suppressed.
These details are handled by the new function
open_n_lock_single_table(), which has nearly the same signature as
open_ltable() and can replace it in most cases.
In reopen_tables() some of the tables open by a thread can be
closed and reopened. When a MERGE child is affected, the parent
must be closed and reopened too. Closing of the parent is forced
before the first child is closed. Reopen happens in the order of
thd->open_tables. MERGE parents do not attach their children
automatically at open. This is done after all tables are reopened.
So all children are open when attaching them.
Special lock handling like mysql_lock_abort() or mysql_lock_remove()
needs to be suppressed for MERGE children or forwarded to the parent.
This depends on the situation. In loops over all open tables one
suppresses child lock handling. When a single table is touched,
forwarding is done.
Behavioral changes:
===================
This patch changes the behavior of temporary MERGE tables.
Temporary MERGE must have temporary children.
The old behavior was wrong. A temporary table is not locked. Hence
even non-temporary children were not locked. See
Bug 19627 - temporary merge table locking.
You cannot change the union list of a non-temporary MERGE table
when LOCK TABLES is in effect. The following does *not* work:
CREATE TABLE m1 ... ENGINE=MRG_MYISAM ...;
LOCK TABLES t1 WRITE, t2 WRITE, m1 WRITE;
ALTER TABLE m1 ... UNION=(t1,t2) ...;
However, you can do this with a temporary MERGE table.
You cannot create a MERGE table with CREATE ... SELECT, neither
as a temporary MERGE table, nor as a non-temporary MERGE table.
CREATE TABLE m1 ... ENGINE=MRG_MYISAM ... SELECT ...;
Gives error message: table is not BASE TABLE.
