buf_block_dbg_add_level(block, level): Define as an empty macro when
UNIV_SYNC_DEBUG is not defined. Remove #ifdef UNIV_SYNC_DEBUG around
all invocations.
cache, especially buf_pool->LRU_old and bpage->old.
buf_LRU_old_adjust_len(), buf_LRU_remove_block(): Check that blocks in
buf_pool->LRU_old have the "old" flag set and the blocks preceding
buf_pool->LRU_old have the "old" flag clear.
buf_LRU_add_block_low(), buf_relocate(): Check that buf_pool->LRU_old
is the first block in the LRU list whose "old" flag is set.
buf_LRU_free_block(): When replacing a control block in the LRU list
with a control block for a compressed page, assert that the "old"
flags in the neighboring LRU list entries grow monotonically.
buf_page_set_old(): Assert that the "old" flags in the neighboring LRU
list entries grow monotonically.
(r2478 was skipped for the obvious reason)
------------------------------------------------------------------------
r2464 | vasil | 2008-05-19 17:59:42 +0300 (Mon, 19 May 2008) | 9 lines
branches/5.1:
Fix Bug#36600 SHOW STATUS takes a lot of CPU in buf_get_latched_pages_number
by removing the Innodb_buffer_pool_pages_latched variable from
SHOW STATUS output in non-UNIV_DEBUG compilation.
Approved by: Heikki
------------------------------------------------------------------------
r2466 | calvin | 2008-05-20 01:37:14 +0300 (Tue, 20 May 2008) | 12 lines
branches/5.1:
Fix Bug#11894 innodb_file_per_table crashes w/ Windows .sym symbolic
link hack
The crash was due to un-handled error 3 (path not found). In the case
of file per table, change the call to os_file_handle_error_no_exit()
from os_file_handle_error(). Also, checks for full path pattern during
table create (Windows only), which is used in symbolic link and temp
table creation.
Approved by: Heikki
------------------------------------------------------------------------
r2478 | sunny | 2008-05-23 08:29:08 +0300 (Fri, 23 May 2008) | 3 lines
branches/5.1: Fix for bug# 36793. This is a back port from branches/zip. This
code has been tested on a big-endian machine too.
------------------------------------------------------------------------
r2480 | vasil | 2008-05-27 11:40:07 +0300 (Tue, 27 May 2008) | 11 lines
branches/5.1:
Fix Bug#36819 ut_usectime does not handle errors from gettimeofday
by retrying gettimeofday() several times if it fails in ut_usectime().
If it fails on all calls then return error to the caller to be handled
at higher level.
Update the variable innodb_row_lock_time_max in SHOW STATUS output only
if ut_usectime() was successful.
------------------------------------------------------------------------
r2482 | sunny | 2008-05-28 12:18:35 +0300 (Wed, 28 May 2008) | 5 lines
branches/5.1: Fix for Bug#35602, "Failed to read auto-increment value from
storage engine". The test for REPLACE was an error of ommission since it's
classified as a simple INSERT. For REPLACE statements we don't acquire
the special AUTOINC lock for AUTOINC_NEW_STYLE_LOCKING with this fix.
------------------------------------------------------------------------
r2485 | vasil | 2008-05-28 16:01:14 +0300 (Wed, 28 May 2008) | 9 lines
branches/5.1:
Fix Bug#36149 Read buffer overflow in srv0start.c found during "make test"
Use strncmp(3) instead of memcmp(3) to avoid reading past end of the string
if it is empty (*str == '\0'). This bug is _not_ a buffer overflow.
Discussed with: Sunny (via IM)
------------------------------------------------------------------------
that in the fix but the earlier check fails because it tries to be too
strict and assumes that if the block is on the clean list then it can
only be in state io fix NONE.
blocks that contains uncompressed and compressed frames. This patch was
designed by Heikki and Inaam, implemented by Inaam, and refined and reviewed
by Marko and Sunny.
buf_buddy_n_frames, buf_buddy_min_n_frames, buf_buddy_max_n_frames: Remove.
buf_page_belongs_to_unzip_LRU(): New predicate:
bpage->zip.data && buf_page_get_state(bpage) == BUF_BLOCK_FILE_PAGE.
buf_pool_t, buf_block_t: Add the linked list unzip_LRU. A block in the
regular LRU list is in unzip_LRU iff buf_page_belongs_to_unzip_LRU() holds.
buf_LRU_free_block(): Add a third return value to refine the case
"cannot free the block".
buf_LRU_search_and_free_block(): Update the documentation to reflect the
implementation.
buf_LRU_stat_t, buf_LRU_stat_cur, buf_LRU_stat_sum, buf_LRU_stat_arr[]:
Statistics for the unzip_LRU algorithm.
buf_LRU_stat_update(): New function: Update the statistics. Called once
per second by srv_error_monitor_thread().
buf_LRU_validate(): Validate the unzip_LRU list as well.
buf_LRU_evict_from_unzip_LRU(): New predicate: Use the unzip_LRU before
falling back to the regular LRU?
buf_LRU_free_from_unzip_LRU_list(), buf_LRU_free_from_common_LRU_list():
Subfunctions of buf_LRU_search_and_free_block().
buf_LRU_search_and_free_block(): Reimplement. Try to evict an uncompressed
page from the unzip_LRU list before falling back to evicting an entire block
from the common LRU list.
buf_unzip_LRU_remove_block_if_needed(): New function.
buf_unzip_LRU_add_block(): New function: Add a block to the unzip_LRU list.
symbols. Use it for all definitions of non-static variables and functions.
lexyy.c, make_flex.sh: Declare yylex as UNIV_INTERN, not static. It is
referenced from pars0grm.c.
Actually, according to
nm .libs/ha_innodb.so|grep -w '[ABCE-TVXYZ]'
the following symbols are still global:
* The vtable for class ha_innodb
* pars0grm.c: The function yyparse() and the variables yychar, yylval, yynerrs
The required changes to the Bison-generated file pars0grm.c will be addressed
in a separate commit, which will add a script similar to make_flex.sh.
The class ha_innodb is renamed from class ha_innobase by a #define. Thus,
there will be no clash with the builtin InnoDB. However, there will be some
overhead for invoking virtual methods of class ha_innodb. Ideas for making
the vtable hidden are welcome. -fvisibility=hidden is not available in GCC 3.
stored columns (BLOBs).
btr_copy_blob_prefix(), btr_copy_zblob_prefix(),
btr_copy_externally_stored_field_prefix_low(),
btr_copy_externally_stored_field_prefix(),
btr_copy_externally_stored_field(),
btr_rec_copy_externally_stored_field():
Note that the page containing the clustered index record that points to
the BLOB must be latched.
btr_copy_zblob_prefix(): Note that there is no latch on the page, and thus
all accesses to a given page via this function must be covered by the same
set of locks or latches.
btr_copy_zblob_prefix(): Note that the block acquired by
buf_page_get_zip() is protected by an exclusive table lock or
or by a latch on the clustered index record.
the buffer pool mutex. The instrumentation can be activated by
defining UNIV_DEBUG or UNIV_BUF_DEBUG at compilation time.
buf_pool_mutex_exit_forbidden: New variable. When this is nonzero,
an assertion will fail in buf_pool_mutex_exit().
buf_pool_mutex_exit_forbid(): Macro for declaring that the buffer pool
mutex must not be released. Calls may be nested.
buf_pool_mutex_exit_allow(): Macro for declaring that the buffer pool
mutex may be released. Calls may be nested.
buf_LRU_search_and_free_block(): Prohibit buf_pool_mutex_exit() in the
scope of the function.
buf_LRU_free_block(): Prohibit buf_pool_mutex_exit() in buf_buddy_alloc()
and buf_buddy_free().
buf_LRU_block_remove_hashed_page(): Prohibit buf_pool_mutex_exit()
in buf_buddy_free().
buf_pool->mutex: Rename to buf_pool_mutex, so that the wrappers will have
to be used when changes are merged from other source trees.
buf_pool->zip_mutex: Rename to buf_pool_zip_mutex.
buf_pool_mutex_own(), buf_pool_mutex_enter(), buf_pool_mutex_exit():
Wrappers for buf_pool_mutex.
allocating compressed page frames or their control blocks. Also note
that if buf_buddy_alloc() is used for allocating a control block,
it must be initialized before releasing buf_pool->mutex.
buf_page_init_for_read(): When the page hash check fails after
buf_buddy_alloc(), free the uninitialized control block before freeing
the compressed page frame. This fixes a potential error in
buf_buddy_relocate_block().
mutex is temporarily released.
buf_LRU_free_block(), buf_buddy_alloc_clean(): Add an output parameter that
will be assigned TRUE when the buffer pool mutex is released.
This bug was spotted by and fix provided by Sunny.
buf_block_is_uncompressed(): Check that the pointer is aligned. Use the
C modulus operator % instead of ut_align_offset(), because sizeof(buf_block_t)
is not guaranteed to be a power of 2.
point to a buffer pool chunk that has been released when resizing the
buffer pool.
buf_block_is_uncompressed(): Check that the pointer is aligned. Thanks
to this check, it is safe to pass an arbitrary pointer as a guess
to buf_page_get_gen().
buf_LRU_free_block(): Check that the block descriptor contains valid data.
buf_buddy_relocate(): Check that the source block contains valid data.
buf_page_get_gen(): Do not dereference bpage after calling buf_relocate().
This avoids a bogus Valgrind warning; the memory itself was valid.
buf_page_hash_get(): Check that the returned block descriptor contains
valid data.
buf_block_hash_get(): New function, similar to buf_page_hash_get().
buf_page_get_block(): Remove the const qualifiers. This is a low-level
function, and the operations on block->mutex are non-const.
buf_page_try_get_func(): Implement with lower-level predicates, somewhat
similar to buf_page_get_known_nowait().
lock_rec_print(): Remove the unused variable zip_size and the
call to fil_space_get_zip_size(). Adapt to buf_page_try_get() returning
a const pointer.
Move part of the code from lock_rec_print() in a separate function
buf_page_try_get() because the same functionality is needed in
INFORMATION SCHEMA code.
Approved by: Heikki
only after the buffer_cache has warmed up. During the initial warmup
phase these values are set to zero. We should recommend to move the
block to the start of the LRU in this case.
Also added some comments to buf0buf.c about the LRU logic.
reviewed by: Sunny
mtr_commit(): Do not acquire the log mutex if no log records are to be written.
ibuf_set_free_bits_func(): Do not clear mtr.modifications, because that would
prevent the dirty insert buffer bitmap block from being moved to the flush
list. Instead, assume that mtr_commit() will not acquire log_sys->mutex
because redo logging is disabled.
buf_page_init_for_read(): I/O-fix the block before buf_buddy_alloc(), because
the newly allocated block could otherwise be reused by the compressed page.
page_zip_max_ins_size(): New function.
btr_cur_optimistic_insert(), btr_cur_optimistic_delete(),
btr_page_split_and_insert(), btr_compress(): Do not update the
ibuf free bits for non-leaf pages or pages belonging to a clustered index.
The insert buffer only covers operations on leaf pages of secondary indexes.
For pages covered by the insert buffer, limit the max_ins_size to
page_zip_max_ins_size().
buf_page_get_gen(): Merge the insert buffer after decompressing the page.
buf_page_io_complete(): Relax the assertion about ibuf_count. For
compressed-only pages, the insert buffer merge takes place
in buf_page_get_gen().
ibuf_index_page_calc_free_bits(), ibuf_index_page_calc_free_from_bits(),
ibuf_index_page_calc_free(), ibuf_update_free_bits_if_full(),
ibuf_update_free_bits_low(), ibuf_update_free_bits_for_two_pages_low(),
ibuf_set_free_bits_low(): Add the parameter zip_size. Limit the maximum
insert size to page_zip_max_ins_size().
buf_buddy_alloc() until after the block has been found not to exist
in the buffer pool.
buf_buddy_alloc(), buf_buddy_alloc_low(): Make lru an output parameter.
Improve documentation.
buf_page_init_for_read(): Simplify the code. Check buf_page_hash_get()
again if buf_buddy_alloc() released buf_pool->mutex.
frame when reading compressed pages, unless crash recovery is in progress.
buf_page_read_low(): Adapt for buf_page_init_for_read() returning
buf_page_t* instead of buf_block_t*.
but in buf_page_get_gen(). Adjust comments. This prevents
unnecessary decompression in read-ahead when the compressed block
exists in the buffer pool.
If the block does not exist in the buffer pool, read-ahead will still
allocate an uncompressed page and decompress the block.
Move buf_block_init_low() and buf_zip_decompress() earlier in the file,
because some compilers are unable to inline functions that are defined
after the invocation.
buf_page_get_gen(): Decompress the block if needed.
buf_page_init_for_read(): Do not decompress.
