Logging slow stored procedures caused the slow log to write
very large lock times. The lock times was a result of a
negative number being cast to an unsigned integer.
The reason the lock time appeard negative was because
one of the measurements points was reset after execution
causing it to change order with the start time of the
statement.
This bug is related to bug 47905 which in turn was
introduced because of a joint fix for 12480,12481,12482 and 11587.
The fix is to only reset the start_time before any statement
execution in a SP while not resetting start_utime or
utime_after_lock which are used for measuring the
performance of the SP. Start_time is used to set the
timestamp on the replication event which controlls how
the slave interprets time functions like NOW().
Conflicts:
Text conflict in mysql-test/r/explain.result
Text conflict in mysql-test/t/explain.test
Text conflict in sql/net_serv.cc
Text conflict in sql/sp_head.cc
Text conflict in sql/sql_priv.h
Fix for bug #46947 "Embedded SELECT without FOR UPDATE is
causing a lock", with after-review fixes.
SELECT statements with subqueries referencing InnoDB tables
were acquiring shared locks on rows in these tables when they
were executed in REPEATABLE-READ mode and with statement or
mixed mode binary logging turned on.
This was a regression which were introduced when fixing
bug 39843.
The problem was that for tables belonging to subqueries
parser set TL_READ_DEFAULT as a lock type. In cases when
statement/mixed binary logging at open_tables() time this
type of lock was converted to TL_READ_NO_INSERT lock at
open_tables() time and caused InnoDB engine to acquire
shared locks on reads from these tables. Although in some
cases such behavior was correct (e.g. for subqueries in
DELETE) in case of SELECT it has caused unnecessary locking.
This patch tries to solve this problem by rethinking our
approach to how we handle locking for SELECT and subqueries.
Now we always set TL_READ_DEFAULT lock type for all cases
when we read data. When at open_tables() time this lock
is interpreted as TL_READ_NO_INSERT or TL_READ depending
on whether this statement as a whole or call to function
which uses particular table should be written to the
binary log or not (if yes then statement should be properly
serialized with concurrent statements and stronger lock
should be acquired).
Test coverage is added for both InnoDB and MyISAM.
This patch introduces an "incompatible" change in locking
scheme for subqueries used in SELECT ... FOR UPDATE and
SELECT .. IN SHARE MODE.
In 4.1 the server would use a snapshot InnoDB read for
subqueries in SELECT FOR UPDATE and SELECT .. IN SHARE MODE
statements, regardless of whether the binary log is on or off.
If the user required a different type of read (i.e. locking read),
he/she could request so explicitly by providing FOR UPDATE/IN SHARE MODE
clause for each individual subquery.
On of the patches for 5.0 broke this behaviour (which was not documented
or tested), and started to use locking reads fora all subqueries in SELECT ...
FOR UPDATE/IN SHARE MODE. This patch restored 4.1 behaviour.
mysql-test/include/check_concurrent_insert.inc:
Added auxiliary script which allows to check if statement
reading table allows concurrent inserts in it.
mysql-test/include/check_no_concurrent_insert.inc:
Added auxiliary script which allows to check that statement
reading table doesn't allow concurrent inserts in it.
mysql-test/include/check_no_row_lock.inc:
Added auxiliary script which allows to check if statement
reading table doesn't take locks on its rows.
mysql-test/include/check_shared_row_lock.inc:
Added auxiliary script which allows to check if statement
reading table takes shared locks on some of its rows.
mysql-test/r/bug39022.result:
After bug #46947 'Embedded SELECT without FOR UPDATE is
causing a lock' was fixed test case for bug 39022 has to
be adjusted in order to trigger execution path on which
original problem was encountered.
mysql-test/r/innodb_mysql_lock2.result:
Added coverage for handling of locking in various cases when
we read data from InnoDB tables (includes test case for
bug #46947 'Embedded SELECT without FOR UPDATE is causing a
lock').
mysql-test/r/lock_sync.result:
Added coverage for handling of locking in various cases when
we read data from MyISAM tables.
mysql-test/t/bug39022.test:
After bug #46947 'Embedded SELECT without FOR UPDATE is
causing a lock' was fixed test case for bug 39022 has to
be adjusted in order to trigger execution path on which
original problem was encountered.
mysql-test/t/innodb_mysql_lock2.test:
Added coverage for handling of locking in various cases when
we read data from InnoDB tables (includes test case for
bug #46947 'Embedded SELECT without FOR UPDATE is causing a
lock').
mysql-test/t/lock_sync.test:
Added coverage for handling of locking in various cases when
we read data from MyISAM tables.
sql/log_event.cc:
Since LEX::lock_option member was removed we no longer can
rely on its value in Load_log_event::print_query() to
determine that log event correponds to LOAD DATA CONCURRENT
statement (this was not correct in all situations anyway).
A new Load_log_event's member was introduced as a replacement.
It is initialized at event object construction time and
explicitly indicates whether LOAD DATA was concurrent.
sql/log_event.h:
Since LEX::lock_option member was removed we no longer can
rely on its value in Load_log_event::print_query() to
determine that log event correponds to LOAD DATA CONCURRENT
statement (this was not correct in all situations anyway).
A new Load_log_event's member was introduced as a replacement.
It is initialized at event object construction time and
explicitly indicates whether LOAD DATA was concurrent.
sql/sp_head.cc:
sp_head::reset_lex():
Before parsing substatement reset part of parser state
which needs this (e.g. set Yacc_state::m_lock_type to
default value).
sql/sql_acl.cc:
Since LEX::reset_n_backup_query_tables_list() now also
resets LEX::sql_command member (as it became part of
Query_tables_list class) we have to restore it in cases
when while working with proxy Query_table_list we assume
that LEX::sql_command still corresponds to original SQL
command being executed (for example, when we are logging
statement to the binary log while having Query_tables_list
reset and backed up).
sql/sql_base.cc:
Changed read_lock_type_for_table() to return a weak TL_READ
type of lock in cases when we are executing statement which
won't update tables directly and table doesn't belong to
statement's prelocking list and thus can't be used by a
stored function. It is OK to do so since in this case table
won't be used by statement or function call which will be
written to the binary log, so serializability requirements
for it can be relaxed.
One of results from this change is that SELECTs on InnoDB
tables no longer takes shared row locks for tables which
are used in subqueries (i.e. bug #46947 is fixed).
Another result is that for similar SELECTs on MyISAM tables
concurrent inserts are allowed.
In order to implement this change signature of
read_lock_type_for_table() function was changed to take
pointers to Query_tables_list and TABLE_LIST objects.
sql/sql_base.h:
- Function read_lock_type_for_table() now takes pointers
to Query_tables_list and TABLE_LIST elements as its
arguments since to correctly determine lock type it needs
to know what statement is being performed and whether table
element for which lock type to be determined belongs to
prelocking list.
sql/sql_lex.cc:
- Removed LEX::lock_option and st_select_lex::lock_option
members. Places in parser that were using them now use
Yacc_state::m_lock_type instead.
- To emphasize that LEX::sql_command member is used during
process of opening and locking of tables it was moved to
Query_tables_list class. It is now reset by
Query_tables_list::reset_query_tables_list() method.
sql/sql_lex.h:
- Removed st_select_lex::lock_option member as there is no
real need for per-SELECT lock type (HIGH_PRIORITY option
should apply to the whole statement. FOR UPDATE/LOCK IN
SHARE MODE clauses can be handled without this member).
The main effect which was achieved by introduction of this
member, i.e. using TL_READ_DEFAULT lock type for
subqueries, is now achieved by setting LEX::lock_option
(or rather its replacement - Yacc_state::m_lock_type) to
TL_READ_DEFAULT in almost all cases.
- To emphasize that LEX::sql_command member is used during
process of opening and locking of tables it was moved to
Query_tables_list class.
- Replaced LEX::lock_option with Yacc_state::m_lock_type
in order to emphasize that this value is relevant only
during parsing. Unlike for LEX::lock_option the default
value for Yacc_state::m_lock_type is TL_READ_DEFAULT.
Note that for cases when it is OK to take a "weak" read
lock (e.g. simple SELECT) this lock type will be converted
to TL_READ at open_tables() time. So this change won't
cause negative change in behavior for such statements.
OTOH this change ensures that, for example, for SELECTs
which are used in stored functions TL_READ_NO_INSERT lock
is taken when necessary and as result calls to such stored
functions can be written to the binary log with correct
serialization.
sql/sql_load.cc:
Load_log_event constructor now requires a parameter that
indicates whether LOAD DATA is concurrent.
sql/sql_parse.cc:
LEX::lock_option was replaced with Yacc_state::m_lock_type.
And instead of resetting the latter implicitly in
mysql_init_multi_delete() we do it explicitly in the
places in parser which call this function.
sql/sql_priv.h:
- To be able more easily distinguish high-priority SELECTs
in st_select_lex::print() method added flag for
HIGH_PRIORITY option.
sql/sql_select.cc:
Changed code not to rely on LEX::lock_option to determine
that it is high-priority SELECT. It was replaced with
Yacc_state::m_lock_type which is accessible only at
parse time. So instead of LEX::lock_option we now rely
on a newly introduced flag for st_select_lex::options -
SELECT_HIGH_PRIORITY.
sql/sql_show.cc:
Since LEX::reset_n_backup_query_tables_list() now also
resets LEX::sql_command member (as it became part of
Query_tables_list class) we have to restore it in cases
when while working with proxy Query_table_list we assume
that LEX::sql_command still corresponds to original SQL
command being executed.
sql/sql_table.cc:
Since LEX::reset_query_tables_list() now also resets
LEX::sql_command member (as it became part of
Query_tables_list class) we have to restore value of this
member when this method is called by mysql_admin_table(),
to make this code safe for re-execution.
sql/sql_trigger.cc:
Since LEX::reset_n_backup_query_tables_list() now also
resets LEX::sql_command member (as it became part of
Query_tables_list class) we have to restore it in cases
when while working with proxy Query_table_list we assume
that LEX::sql_command still corresponds to original SQL
command being executed (for example, when we are logging
statement to the binary log while having Query_tables_list
reset and backed up).
sql/sql_update.cc:
Function read_lock_type_for_table() now takes pointers
to Query_tables_list and TABLE_LIST elements as its
arguments since to correctly determine lock type it needs
to know what statement is being performed and whether table
element for which lock type to be determined belongs to
prelocking list.
sql/sql_yacc.yy:
- Removed st_select_lex::lock_option member as there is no
real need for per-SELECT lock type (HIGH_PRIORITY option
should apply to the whole statement. FOR UPDATE/LOCK IN
SHARE MODE clauses can be handled without this member).
The main effect which was achieved by introduction of this
member, i.e. using TL_READ_DEFAULT lock type for
subqueries, is now achieved by setting LEX::lock_option
(or rather its replacement - Yacc_state::m_lock_type) to
TL_READ_DEFAULT in almost all cases.
- Replaced LEX::lock_option with Yacc_state::m_lock_type
in order to emphasize that this value is relevant only
during parsing. Unlike for LEX::lock_option the default
value for Yacc_state::m_lock_type is TL_READ_DEFAULT.
Note that for cases when it is OK to take a "weak" read
lock (e.g. simple SELECT) this lock type will be converted
to TL_READ at open_tables() time. So this change won't
cause negative change in behavior for such statements.
OTOH this change ensures that, for example, for SELECTs
which are used in stored functions TL_READ_NO_INSERT lock
is taken when necessary and as result calls to such stored
functions can be written to the binary log with correct
serialization.
- To be able more easily distinguish high-priority SELECTs
in st_select_lex::print() method we now use new flag
in st_select_lex::options bit-field.
Allow stored procedure variables in LIMIT clause.
Only allow variables of INTEGER types.
Handle negative values by means of an implicit cast to UNSIGNED
(similarly to prepared statement placeholders).
Add tests.
Make sure replication works by not doing NAME_CONST substitution
for variables in LIMIT clause.
Add replication tests.
mysql-test/r/sp.result:
Update results (Bug#11918).
mysql-test/suite/rpl/r/rpl_sp.result:
Update results (Bug#11918).
mysql-test/suite/rpl/t/rpl_sp.test:
Add a test case for Bug#11918.
mysql-test/t/sp.test:
Add a test case for Bug#11918.
sql/item.cc:
Mark sp variables in LIMIT clause (a hack for replication).
sql/item.h:
Mark sp variables in LIMIT clause (a hack for replication).
sql/share/errmsg-utf8.txt:
Add a new error message (a type mismatch for LIMIT
clause parameter).
sql/sp_head.cc:
Binlog rewrite sp variables in LIMIT clause without NAME_CONST
substitution.
sql/sql_string.cc:
Implement append_ulonglong method.
sql/sql_string.h:
Declare append_ulonglong().
sql/sql_yacc.yy:
Support stored procedure variables in LIMIT.
Adding my_global.h first in all files using
NO_EMBEDDED_ACCESS_CHECKS.
Correcting a merge problem resulting from a changed definition
of check_some_access compared to the original patches.
Conflicts:
Text conflict in mysql-test/suite/binlog/r/binlog_row_mix_innodb_myisam.result
Text conflict in sql/log.cc
Text conflict in sql/set_var.cc
Text conflict in sql/sql_class.cc
The problem was that a syntactically invalid trigger could cause
the server to crash when trying to list triggers. The crash would
happen due to a mishap in the backup/restore procedure that should
protect parser items which are not associated with the trigger. The
backup/restore is used to isolate the parse tree (and context) of
a statement from the load (and parsing) of a trigger. In this case,
a error during the parsing of a trigger could cause the improper
backup/restore sequence.
The solution is to properly restore the original statement context
before the parser is exited due to syntax errors in the trigger body.
mysql-test/r/trigger.result:
Add test case result for Bug#50755
mysql-test/t/trigger.test:
Add test case for Bug#50755
sql/sp_head.cc:
Merge sp_head::destroy() and sp_head destructor. Retrieve THD
from the LEX so that m_thd is not necessary.
sql/sql_lex.cc:
Explicitly restore the original environment.
This patch:
- Moves all definitions from the mysql_priv.h file into
header files for the component where the variable is
defined
- Creates header files if the component lacks one
- Eliminates all include directives from mysql_priv.h
- Eliminates all circular include cycles
- Rename time.cc to sql_time.cc
- Rename mysql_priv.h to sql_priv.h
CHECK_FIELD_IGNORE was treated as CHECK_FIELD_ERROR_FOR_NULL;
UPDATE...SET...NULL on NOT NULL fields behaved differently after
a trigger.
Now distinguishes between IGNORE and ERROR_FOR_NULL and save/restores
check-field options.
mysql-test/r/trigger.result:
Show that UPDATE...SET...NULL on NOT NULL columns doesn't behave differently
when run after a trigger.
mysql-test/t/trigger.test:
Show that UPDATE...SET...NULL on NOT NULL columns doesn't behave differently
when run after a trigger.
sql/field_conv.cc:
CHECK_FIELD_IGNORE was treated as CHECK_FIELD_ERROR_FOR_NULL.
Distinguish between the two.
sql/sp_head.cc:
Raise error as needed.
sql/sql_class.cc:
Save and restore check-fields options.
sql/sql_class.h:
Make room so we can save check-fields options.
sql/sql_insert.cc:
Raise error as needed.
This patch prevents system threads and system table accesses from
using user-specified values for "lock_wait_timeout". Instead all
such accesses are done using the default value (1 year).
This prevents background tasks (such as replication, events,
accessing stored function definitions, logging, reading time-zone
information, etc.) from failing in cases where the global value
of "lock_wait_timeout" is set very low.
The patch also simplifies the open tables API. Rather than adding
another convenience function for opening and locking system tables,
this patch removes most of the existing convenience functions for
open_and_lock_tables_derived(). Before, open_and_lock_tables() was
a convenience function that enforced derived tables handling, while
open_and_lock_tables_derived() was the main function where derived
tables handling was optional. Now, this convencience function is
gone and the main function is renamed to open_and_lock_tables().
No test case added as it would have required the use of --sleep to
check that system threads and system tables have a different timeout
value from the user-specified "lock_wait_timeout" system variable.
CHECK_FIELD_IGNORE was treated as CHECK_FIELD_ERROR_FOR_NULL;
UPDATE...SET...NULL on NOT NULL fields behaved differently after
a trigger.
Now distinguishes between IGNORE and ERROR_FOR_NULL and save/restores
check-field options.
mysql-test/r/trigger.result:
Show that UPDATE...SET...NULL on NOT NULL columns doesn't behave differently
when run after a trigger.
mysql-test/t/trigger.test:
Show that UPDATE...SET...NULL on NOT NULL columns doesn't behave differently
when run after a trigger.
sql/field_conv.cc:
CHECK_FIELD_IGNORE was treated as CHECK_FIELD_ERROR_FOR_NULL.
Distinguish between the two.
sql/sp_head.cc:
raise error as needed
sql/sql_class.cc:
Save and restore check-fields options.
sql/sql_class.h:
Make room so we can save check-fields options.
sql/sql_insert.cc:
raise error as needed
mysql-test/t/disabled.def:
Restore disabled ssl tests: SSL certificates were updated.
Disable sp_sync.test, the test case can't work in next-4284.
mysql-test/t/partition_innodb.test:
Disable parsing of the test case for Bug#47343,
the test can not work in next-4284.
mysql-test/t/ps_ddl.test:
Update results (CREATE TABLE IF NOT EXISTS takes
into account existence of the temporary table).
Cherry-pick a fix Bug#37148 from next-mr, to preserve
file ids of the added files, and ensure that all the necessary
changes have been pulled.
Since initially Bug#37148 was null-merged into 6.0,
the changeset that is now being cherry-picked was likewise
null merged into next-4284.
Now that Bug#37148 has been reapplied to 6.0, try to make
it work with next-4284. This is also necessary to be able
to pull other changes from 5.1-rep into next-4284.
To resolve the merge issues use this changeset applied
to 6.0:
revid:jperkin@sun.com-20091216103628-ylhqf7s6yegui2t9
revno: 3776.1.1
committer: He Zhenxing <zhenxing.he@sun.com>
branch nick: 6.0-codebase-bugfixing
timestamp: Thu 2009-12-17 17:02:50 +0800
message:
Fix merge problem with Bug#37148
Add a wait-for graph based deadlock detector to the
MDL subsystem.
Fixes bug #46272 "MySQL 5.4.4, new MDL: unnecessary deadlock" and
bug #37346 "innodb does not detect deadlock between update and
alter table".
The first bug manifested itself as an unwarranted abort of a
transaction with ER_LOCK_DEADLOCK error by a concurrent ALTER
statement, when this transaction tried to repeat use of a
table, which it has already used in a similar fashion before
ALTER started.
The second bug showed up as a deadlock between table-level
locks and InnoDB row locks, which was "detected" only after
innodb_lock_wait_timeout timeout.
A transaction would start using the table and modify a few
rows.
Then ALTER TABLE would come in, and start copying rows
into a temporary table. Eventually it would stumble on
the modified records and get blocked on a row lock.
The first transaction would try to do more updates, and get
blocked on thr_lock.c lock.
This situation of circular wait would only get resolved
by a timeout.
Both these bugs stemmed from inadequate solutions to the
problem of deadlocks occurring between different
locking subsystems.
In the first case we tried to avoid deadlocks between metadata
locking and table-level locking subsystems, when upgrading shared
metadata lock to exclusive one.
Transactions holding the shared lock on the table and waiting for
some table-level lock used to be aborted too aggressively.
We also allowed ALTER TABLE to start in presence of transactions
that modify the subject table. ALTER TABLE acquires
TL_WRITE_ALLOW_READ lock at start, and that block all writes
against the table (naturally, we don't want any writes to be lost
when switching the old and the new table). TL_WRITE_ALLOW_READ
lock, in turn, would block the started transaction on thr_lock.c
lock, should they do more updates. This, again, lead to the need
to abort such transactions.
The second bug occurred simply because we didn't have any
mechanism to detect deadlocks between the table-level locks
in thr_lock.c and row-level locks in InnoDB, other than
innodb_lock_wait_timeout.
This patch solves both these problems by moving lock conflicts
which are causing these deadlocks into the metadata locking
subsystem, thus making it possible to avoid or detect such
deadlocks inside MDL.
To do this we introduce new type-of-operation-aware metadata
locks, which allow MDL subsystem to know not only the fact that
transaction has used or is going to use some object but also what
kind of operation it has carried out or going to carry out on the
object.
This, along with the addition of a special kind of upgradable
metadata lock, allows ALTER TABLE to wait until all
transactions which has updated the table to go away.
This solves the second issue.
Another special type of upgradable metadata lock is acquired
by LOCK TABLE WRITE. This second lock type allows to solve the
first issue, since abortion of table-level locks in event of
DDL under LOCK TABLES becomes also unnecessary.
Below follows the list of incompatible changes introduced by
this patch:
- From now on, ALTER TABLE and CREATE/DROP TRIGGER SQL (i.e. those
statements that acquire TL_WRITE_ALLOW_READ lock)
wait for all transactions which has *updated* the table to
complete.
- From now on, LOCK TABLES ... WRITE, REPAIR/OPTIMIZE TABLE
(i.e. all statements which acquire TL_WRITE table-level lock) wait
for all transaction which *updated or read* from the table
to complete.
As a consequence, innodb_table_locks=0 option no longer applies
to LOCK TABLES ... WRITE.
- DROP DATABASE, DROP TABLE, RENAME TABLE no longer abort
statements or transactions which use tables being dropped or
renamed, and instead wait for these transactions to complete.
- Since LOCK TABLES WRITE now takes a special metadata lock,
not compatible with with reads or writes against the subject table
and transaction-wide, thr_lock.c deadlock avoidance algorithm
that used to ensure absence of deadlocks between LOCK TABLES
WRITE and other statements is no longer sufficient, even for
MyISAM. The wait-for graph based deadlock detector of MDL
subsystem may sometimes be necessary and is involved. This may
lead to ER_LOCK_DEADLOCK error produced for multi-statement
transactions even if these only use MyISAM:
session 1: session 2:
begin;
update t1 ... lock table t2 write, t1 write;
-- gets a lock on t2, blocks on t1
update t2 ...
(ER_LOCK_DEADLOCK)
- Finally, support of LOW_PRIORITY option for LOCK TABLES ... WRITE
was abandoned.
LOCK TABLE ... LOW_PRIORITY WRITE from now on has the same
priority as the usual LOCK TABLE ... WRITE.
SELECT HIGH PRIORITY no longer trumps LOCK TABLE ... WRITE in
the wait queue.
- We do not take upgradable metadata locks on implicitly
locked tables. So if one has, say, a view v1 that uses
table t1, and issues:
LOCK TABLE v1 WRITE;
FLUSH TABLE t1; -- (or just 'FLUSH TABLES'),
an error is produced.
In order to be able to perform DDL on a table under LOCK TABLES,
the table must be locked explicitly in the LOCK TABLES list.
mysql-test/include/handler.inc:
Adjusted test case to trigger an execution path on which bug 41110
"crash with handler command when used concurrently with alter
table" and bug 41112 "crash in mysql_ha_close_table/get_lock_data
with alter table" were originally discovered. Left old test case
which no longer triggers this execution path for the sake of
coverage.
Added test coverage for HANDLER SQL statements and type-aware
metadata locks.
Added a test for the global shared lock and HANDLER SQL.
Updated tests to take into account that the old simple deadlock
detection heuristics was replaced with a graph-based deadlock
detector.
mysql-test/r/debug_sync.result:
Updated results (see debug_sync.test).
mysql-test/r/handler_innodb.result:
Updated results (see handler.inc test).
mysql-test/r/handler_myisam.result:
Updated results (see handler.inc test).
mysql-test/r/innodb-lock.result:
Updated results (see innodb-lock.test).
mysql-test/r/innodb_mysql_lock.result:
Updated results (see innodb_mysql_lock.test).
mysql-test/r/lock.result:
Updated results (see lock.test).
mysql-test/r/lock_multi.result:
Updated results (see lock_multi.test).
mysql-test/r/lock_sync.result:
Updated results (see lock_sync.test).
mysql-test/r/mdl_sync.result:
Updated results (see mdl_sync.test).
mysql-test/r/sp-threads.result:
SHOW PROCESSLIST output has changed due to the fact that waiting
for LOCK TABLES WRITE now happens within metadata locking
subsystem.
mysql-test/r/truncate_coverage.result:
Updated results (see truncate_coverage.test).
mysql-test/suite/funcs_1/datadict/processlist_val.inc:
SELECT FROM I_S.PROCESSLIST output has changed due to fact that
waiting for LOCK TABLES WRITE now happens within metadata locking
subsystem.
mysql-test/suite/funcs_1/r/processlist_val_no_prot.result:
SELECT FROM I_S.PROCESSLIST output has changed due to fact that
waiting for LOCK TABLES WRITE now happens within metadata locking
subsystem.
mysql-test/suite/rpl/t/rpl_sp.test:
Updated to a new SHOW PROCESSLIST state name.
mysql-test/t/debug_sync.test:
Use LOCK TABLES READ instead of LOCK TABLES WRITE as the latter
no longer allows to trigger execution path involving waiting on
thr_lock.c lock and therefore reaching debug sync-point covered
by this test.
mysql-test/t/innodb-lock.test:
Adjusted test case to the fact that innodb_table_locks=0 option is
no longer supported, since LOCK TABLES WRITE handles all its
conflicts within MDL subsystem.
mysql-test/t/innodb_mysql_lock.test:
Added test for bug #37346 "innodb does not detect deadlock between
update and alter table".
mysql-test/t/lock.test:
Added test coverage which checks the fact that we no longer support
DDL under LOCK TABLES on tables which were locked implicitly.
Adjusted existing test cases accordingly.
mysql-test/t/lock_multi.test:
Added test for bug #46272 "MySQL 5.4.4, new MDL: unnecessary
deadlock". Adjusted other test cases to take into account the
fact that waiting for LOCK TABLES ... WRITE now happens within MDL
subsystem.
mysql-test/t/lock_sync.test:
Since LOCK TABLES ... WRITE now takes SNRW metadata lock for
tables locked explicitly we have to implicitly lock InnoDB tables
(through view) to trigger the table-level lock conflict between
TL_WRITE and TL_WRITE_ALLOW_WRITE.
mysql-test/t/mdl_sync.test:
Added basic test coverage for type-of-operation-aware metadata
locks. Also covered with tests some use cases involving HANDLER
statements in which a deadlock could arise.
Adjusted existing tests to take type-of-operation-aware MDL into
account.
mysql-test/t/multi_update.test:
Update to a new SHOW PROCESSLIST state name.
mysql-test/t/truncate_coverage.test:
Adjusted test case after making LOCK TABLES WRITE to wait until
transactions that use the table to be locked are completed.
Updated to the changed name of DEBUG_SYNC point.
sql/handler.cc:
Global read lock functionality has been
moved into a class.
sql/lock.cc:
Global read lock functionality has been
moved into a class.
Updated code to use the new MDL API.
sql/mdl.cc:
Introduced new type-of-operation aware metadata locks.
To do this:
- Changed MDL_lock to use one list for waiting requests and one
list for granted requests. For each list, added a bitmap
that holds information what lock types a list contains.
Added a helper class MDL_lock::List to manipulate with granted
and waited lists while keeping the bitmaps in sync
with list contents.
- Changed lock-compatibility functions to use bitmaps that
define compatibility.
- Introduced a graph based deadlock detector inspired by
waiting_threads.c from Maria implementation.
- Now that we have a deadlock detector, and no longer have
a global lock to protect individual lock objects, but rather
use an rw lock per object, removed redundant code for upgrade,
and the global read lock. Changed the MDL API to
no longer require the caller to acquire the global
intention exclusive lock by means of a separate method.
Removed a few more methods that became redundant.
- Removed deadlock detection heuristic, it has been made
obsolete by the deadlock detector.
- With operation-type-aware metadata locks, MDL subsystem has
become aware of potential conflicts between DDL and open
transactions. This made it possible to remove calls to
mysql_abort_transactions_with_shared_lock() from acquisition
paths for exclusive lock and lock upgrade. Now we can simply
wait for these transactions to complete without fear of
deadlock. Function mysql_lock_abort() has also become
unnecessary for all conflicting cases except when a DDL
conflicts with a connection that has an open HANDLER.
sql/mdl.h:
Introduced new type-of-operation aware metadata locks.
Introduced a graph based deadlock detector and supporting
methods.
Added comments.
God rid of redundant API calls.
Renamed m_lt_or_ha_sentinel to m_trans_sentinel,
since now it guards the global read lock as well as
LOCK TABLES and HANDLER locks.
sql/mysql_priv.h:
Moved the global read lock functionality into a
class.
Added MYSQL_OPEN_FORCE_SHARED_MDL flag which forces
open_tables() to take MDL_SHARED on tables instead of
metadata locks specified in the parser. We use this to
allow PREPARE run concurrently in presence of
LOCK TABLES ... WRITE.
Added signature for find_table_for_mdl_ugprade().
sql/set_var.cc:
Global read lock functionality has been
moved into a class.
sql/sp_head.cc:
When creating TABLE_LIST elements for prelocking or
system tables set the type of request for metadata
lock according to the operation that will be performed
on the table.
sql/sql_base.cc:
- Updated code to use the new MDL API.
- In order to avoid locks starvation we take upgradable
locks all at once. As result implicitly locked tables no
longer get an upgradable lock. Consequently DDL and FLUSH
TABLES for such tables is prohibited.
find_write_locked_table() was replaced by
find_table_for_mdl_upgrade() function.
open_table() was adjusted to return TABLE instance with
upgradable ticket when necessary.
- We no longer wait for all locks on OT_WAIT back off
action -- only on the lock that caused the wait
conflict. Moreover, now we distinguish cases when we
have to wait due to conflict in MDL and old version
of table in TDC.
- Upate mysql_notify_threads_having_share_locks()
to only abort thr_lock.c waits of threads that
have open HANDLERs, since lock conflicts with only
these threads now can lead to deadlocks not detectable
by the MDL deadlock detector.
- Remove mysql_abort_transactions_with_shared_locks()
which is no longer needed.
sql/sql_class.cc:
Global read lock functionality has been moved into a class.
Re-arranged code in THD::cleanup() to simplify assert.
sql/sql_class.h:
Introduced class to incapsulate global read lock
functionality.
Now sentinel in MDL subsystem guards the global read lock
as well as LOCK TABLES and HANDLER locks. Adjusted code
accordingly.
sql/sql_db.cc:
Global read lock functionality has been moved into a class.
sql/sql_delete.cc:
We no longer acquire upgradable metadata locks on tables
which are locked by LOCK TABLES implicitly. As result
TRUNCATE TABLE is no longer allowed for such tables.
Updated code to use the new MDL API.
sql/sql_handler.cc:
Inform MDL_context about presence of open HANDLERs.
Since HANLDERs break MDL protocol by acquiring table-level
lock while holding only S metadata lock on a table MDL
subsystem should take special care about such contexts (Now
this is the only case when mysql_lock_abort() is used).
sql/sql_parse.cc:
Global read lock functionality has been moved into a class.
Do not take upgradable metadata locks when opening tables
for CREATE TABLE SELECT as it is not necessary and limits
concurrency.
When initializing TABLE_LIST objects before adding them
to the table list set the type of request for metadata lock
according to the operation that will be performed on the
table.
We no longer acquire upgradable metadata locks on tables
which are locked by LOCK TABLES implicitly. As result FLUSH
TABLES is no longer allowed for such tables.
sql/sql_prepare.cc:
Use MYSQL_OPEN_FORCE_SHARED_MDL flag when opening
tables during PREPARE. This allows PREPARE to run
concurrently in presence of LOCK TABLES ... WRITE.
sql/sql_rename.cc:
Global read lock functionality has been moved into a class.
sql/sql_show.cc:
Updated code to use the new MDL API.
sql/sql_table.cc:
Global read lock functionality has been moved into a class.
We no longer acquire upgradable metadata locks on tables
which are locked by LOCK TABLES implicitly. As result DROP
TABLE is no longer allowed for such tables.
Updated code to use the new MDL API.
sql/sql_trigger.cc:
Global read lock functionality has been moved into a class.
We no longer acquire upgradable metadata locks on tables
which are locked by LOCK TABLES implicitly. As result
CREATE/DROP TRIGGER is no longer allowed for such tables.
Updated code to use the new MDL API.
sql/sql_view.cc:
Global read lock functionality has been moved into a class.
Fixed results of wrong merge that led to misuse of GLR API.
CREATE VIEW statement is not a commit statement.
sql/table.cc:
When resetting TABLE_LIST objects for PS or SP re-execution
set the type of request for metadata lock according to the
operation that will be performed on the table. Do the same
in auxiliary function initializing metadata lock requests
in a table list.
sql/table.h:
When initializing TABLE_LIST objects set the type of request
for metadata lock according to the operation that will be
performed on the table.
sql/transaction.cc:
Global read lock functionality has been moved into a class.
being logged to slow query log
The problem is that the execution time for a multi-statement
stored procedure as a whole may not be accurate, and thus not
be entered into the slow query log even if the total time
exceeds long_query_time. The reason for this is that
THD::utime_after_lock used for time calculation may be reset
at the start of each new statement, possibly leaving the total
SP execution equal to the time spent executing the last
statement in the SP.
This patch stores the utime on start of SP execution, and
restores it on exit of SP execution. A test is added.
mysql-test/suite/sys_vars/r/slow_query_log_func.result:
New test results for #47905.
mysql-test/suite/sys_vars/t/slow_query_log_func.test:
New test case for #47905.
sql/sp_head.cc:
Save and restore the THD::utime_after_lock on entry and
exit of execute_procedure().
Bug#45523 "Objects of class base_ilist should not be copyable".
Suppress the compiler-generated public copy constructor
and assignment operator of class base_ilist; instead, implement
move_elements_to() function which transfers ownership of elements
from one list to another.
Conflicts:
Text conflict in .bzr-mysql/default.conf
Text conflict in mysql-test/extra/rpl_tests/rpl_loaddata.test
Text conflict in mysql-test/r/mysqlbinlog2.result
Text conflict in mysql-test/suite/binlog/r/binlog_stm_mix_innodb_myisam.result
Text conflict in mysql-test/suite/binlog/r/binlog_unsafe.result
Text conflict in mysql-test/suite/rpl/r/rpl_insert_id.result
Text conflict in mysql-test/suite/rpl/r/rpl_loaddata.result
Text conflict in mysql-test/suite/rpl/r/rpl_stm_auto_increment_bug33029.result
Text conflict in mysql-test/suite/rpl/r/rpl_udf.result
Text conflict in mysql-test/suite/rpl/t/rpl_slow_query_log.test
Text conflict in sql/field.h
Text conflict in sql/log.cc
Text conflict in sql/log_event.cc
Text conflict in sql/log_event_old.cc
Text conflict in sql/mysql_priv.h
Text conflict in sql/share/errmsg.txt
Text conflict in sql/sp.cc
Text conflict in sql/sql_acl.cc
Text conflict in sql/sql_base.cc
Text conflict in sql/sql_class.h
Text conflict in sql/sql_db.cc
Text conflict in sql/sql_delete.cc
Text conflict in sql/sql_insert.cc
Text conflict in sql/sql_lex.cc
Text conflict in sql/sql_lex.h
Text conflict in sql/sql_load.cc
Text conflict in sql/sql_table.cc
Text conflict in sql/sql_update.cc
Text conflict in sql/sql_view.cc
Conflict adding files to storage/innobase. Created directory.
Conflict because storage/innobase is not versioned, but has versioned children. Versioned directory.
Conflict adding file storage/innobase. Moved existing file to storage/innobase.moved.
Conflict adding files to storage/innobase/handler. Created directory.
Conflict because storage/innobase/handler is not versioned, but has versioned children. Versioned directory.
Contents conflict in storage/innobase/handler/ha_innodb.cc
3655 Jon Olav Hauglid 2009-10-19
Bug #30977 Concurrent statement using stored function and DROP FUNCTION
breaks SBR
Bug #48246 assert in close_thread_table
Implement a fix for:
Bug #41804 purge stored procedure cache causes mysterious hang for many
minutes
Bug #49972 Crash in prepared statements
The problem was that concurrent execution of DML statements that
use stored functions and DDL statements that drop/modify the same
function might result in incorrect binary log in statement (and
mixed) mode and therefore break replication.
This patch fixes the problem by introducing metadata locking for
stored procedures and functions. This is similar to what is done
in Bug#25144 for views. Procedures and functions now are
locked using metadata locks until the transaction is either
committed or rolled back. This prevents other statements from
modifying the procedure/function while it is being executed. This
provides commit ordering - guaranteeing serializability across
multiple transactions and thus fixes the reported binlog problem.
Note that we do not take locks for top-level CALLs. This means
that procedures called directly are not protected from changes by
simultaneous DDL operations so they are executed at the state they
had at the time of the CALL. By not taking locks for top-level
CALLs, we still allow transactions to be started inside
procedures.
This patch also changes stored procedure cache invalidation.
Upon a change of cache version, we no longer invalidate the entire
cache, but only those routines which we use, only when a statement
is executed that uses them.
This patch also changes the logic of prepared statement validation.
A stored procedure used by a prepared statement is now validated
only once a metadata lock has been acquired. A version mismatch
causes a flush of the obsolete routine from the cache and
statement reprepare.
Incompatible changes:
1) ER_LOCK_DEADLOCK is reported for a transaction trying to access
a procedure/function that is locked by a DDL operation in
another connection.
2) Procedure/function DDL operations are now prohibited in LOCK
TABLES mode as exclusive locks must be taken all at once and
LOCK TABLES provides no way to specifiy procedures/functions to
be locked.
Test cases have been added to sp-lock.test and rpl_sp.test.
Work on this bug has very much been a team effort and this patch
includes and is based on contributions from Davi Arnaut, Dmitry
Lenev, Magne Mæhre and Konstantin Osipov.
mysql-test/r/ps_ddl.result:
Update results (Bug#30977).
mysql-test/r/ps_ddl1.result:
Update results (Bug#30977).
mysql-test/r/sp-error.result:
Update results (Bug#30977).
mysql-test/r/sp-lock.result:
Update results (Bug#30977).
mysql-test/suite/rpl/r/rpl_sp.result:
Update results (Bug#30977).
mysql-test/suite/rpl/t/rpl_sp.test:
Add a test case for Bug#30977.
mysql-test/t/ps_ddl.test:
Update comments. We no longer re-prepare a prepared statement
when a stored procedure used in top-level CALL is changed.
mysql-test/t/ps_ddl1.test:
Modifying stored procedure p1 no longer invalidates prepared
statement "call p1" -- we can re-use the prepared statement
without invalidation.
mysql-test/t/sp-error.test:
Use a constant for an error value.
mysql-test/t/sp-lock.test:
Add test coverage for Bug#30977.
sql/lock.cc:
Implement lock_routine_name() - a way to acquire an
exclusive metadata lock (ex- name-lock) on
stored procedure/function.
sql/sp.cc:
Change semantics of sp_cache_routine() -- now it has an option
to make sure that the routine that is cached is up to date (has
the latest sp cache version).
Add sp_cache_invalidate() to sp_drop_routine(), where it was
missing (a bug!).
Acquire metadata locks for SP DDL (ALTER/CREATE/DROP). This is
the core of the fix for Bug#30977.
Since caching and cache invalidation scheme was changed, make
sure we don't invalidate the SP cache in the middle of a stored
routine execution. At the same time, make sure we don't access
stale data due to lack of invalidation.
For that, change ALTER FUNCTION/PROCEDURE to not use the cache,
and SHOW PROCEDURE CODE/SHOW CREATE PROCEDURE/FUNCTION to always
read an up to date version of the routine from the cache.
sql/sp.h:
Add a helper wrapper around sp_cache_routine().
sql/sp_cache.cc:
Implement new sp_cache_version() and sp_cache_flush_obsolete().
Now we flush stale routines individually, rather than all at once.
sql/sp_cache.h:
Update signatures of sp_cache_version() and sp_cache_flush_obsolete().
sql/sp_head.cc:
Add a default initialization of sp_head::m_sp_cache_version.
Remove a redundant sp_head::create().
sql/sp_head.h:
Add m_sp_cache_version to sp_head class - we now
keep track of every routine in the stored procedure cache, rather than
of the entire cache.
sql/sql_base.cc:
Implement prelocking for stored routines. Validate stored
routines after they were locked.
Flush obsolete routines upon next access, one by one, not all at once
(Bug#41804).
Style fixes.
sql/sql_class.h:
Rename a Open_table_context method.
sql/sql_parse.cc:
Make sure stored procedures DDL commits the active transaction
(issues an implicit commit before and after).
Remove sp_head::create(), a pure redundancy.
Move the semantical check during alter routine inside sp_update_routine() code in order to:
- avoid using SP cache during update, it may be obsolete.
- speed up and simplify the update procedure.
Remove sp_cache_flush_obsolete() calls, we no longer flush the entire
cache, ever, stale routines are flushed before next use, one at a time.
sql/sql_prepare.cc:
Move routine metadata validation to open_and_process_routine().
Fix Bug#49972 (don't swap flags at reprepare).
Reset Sroutine_hash_entries in reinit_stmt_before_use().
Remove SP cache invalidation, it's now done by open_tables().
sql/sql_show.cc:
Fix a warning: remove an unused label.
sql/sql_table.cc:
Reset mdl_request.ticket for tickets acquired for routines inlined
through a view, in CHECK TABLE statement, to satisfy an MDL assert.
sql/sql_update.cc:
Move the cleanup of "translation items" to close_tables_for_reopen(),
since it's needed in all cases when we back off, not just
the back-off in multi-update. This fixes a bug when the server
would crash on attempt to back off when opening tables
for a statement that uses information_schema tables.
Bug#16565 mysqld --help --verbose does not order variablesBug#20413 sql_slave_skip_counter is not shown in show variables
Bug#20415 Output of mysqld --help --verbose is incomplete
Bug#25430 variable not found in SELECT @@global.ft_max_word_len;
Bug#32902 plugin variables don't know their names
Bug#34599 MySQLD Option and Variable Reference need to be consistent in formatting!
Bug#34829 No default value for variable and setting default does not raise error
Bug#34834 ? Is accepted as a valid sql mode
Bug#34878 Few variables have default value according to documentation but error occurs
Bug#34883 ft_boolean_syntax cant be assigned from user variable to global var.
Bug#37187 `INFORMATION_SCHEMA`.`GLOBAL_VARIABLES`: inconsistent status
Bug#40988 log_output_basic.test succeeded though syntactically false.
Bug#41010 enum-style command-line options are not honoured (maria.maria-recover fails)
Bug#42103 Setting key_buffer_size to a negative value may lead to very large allocations
Bug#44691 Some plugins configured as MYSQL_PLUGIN_MANDATORY in can be disabled
Bug#44797 plugins w/o command-line options have no disabling option in --help
Bug#46314 string system variables don't support expressions
Bug#46470 sys_vars.max_binlog_cache_size_basic_32 is broken
Bug#46586 When using the plugin interface the type "set" for options caused a crash.
Bug#47212 Crash in DBUG_PRINT in mysqltest.cc when trying to print octal number
Bug#48758 mysqltest crashes on sys_vars.collation_server_basic in gcov builds
Bug#49417 some complaints about mysqld --help --verbose output
Bug#49540 DEFAULT value of binlog_format isn't the default value
Bug#49640 ambiguous option '--skip-skip-myisam' (double skip prefix)
Bug#49644 init_connect and \0
Bug#49645 init_slave and multi-byte characters
Bug#49646 mysql --show-warnings crashes when server dies
CMakeLists.txt:
Bug#44691 Some plugins configured as MYSQL_PLUGIN_MANDATORY in can be disabled
client/mysql.cc:
don't crash with --show-warnings when mysqld dies
config/ac-macros/plugins.m4:
Bug#44691 Some plugins configured as MYSQL_PLUGIN_MANDATORY in can be disabled
include/my_getopt.h:
comments
include/my_pthread.h:
fix double #define
mysql-test/mysql-test-run.pl:
run sys_vars suite by default
properly recognize envirinment variables (e.g. MTR_MAX_SAVE_CORE) set to 0
escape gdb command line arguments
mysql-test/suite/sys_vars/r/rpl_init_slave_func.result:
init_slave+utf8 bug
mysql-test/suite/sys_vars/t/rpl_init_slave_func.test:
init_slave+utf8 bug
mysys/my_getopt.c:
Bug#34599 MySQLD Option and Variable Reference need to be consistent in formatting!
Bug#46586 When using the plugin interface the type "set" for options caused a crash.
Bug#49640 ambiguous option '--skip-skip-myisam' (double skip prefix)
mysys/typelib.c:
support for flagset
sql/ha_ndbcluster.cc:
backport from telco tree
sql/item_func.cc:
Bug#49644 init_connect and \0
Bug#49645 init_slave and multi-byte characters
sql/sql_builtin.cc.in:
Bug#44691 Some plugins configured as MYSQL_PLUGIN_MANDATORY in can be disabled
sql/sql_plugin.cc:
Bug#44691 Some plugins configured as MYSQL_PLUGIN_MANDATORY in can be disabled
Bug#32902 plugin variables don't know their names
Bug#44797 plugins w/o command-line options have no disabling option in --help
sql/sys_vars.cc:
all server variables are defined here
storage/myisam/ft_parser.c:
remove unnecessary updates of param->quot
storage/myisam/ha_myisam.cc:
myisam_* variables belong here
strings/my_vsnprintf.c:
%o and %llx
unittest/mysys/my_vsnprintf-t.c:
%o and %llx tests
vio/viosocket.c:
bugfix: fix @@wait_timeout to work with socket timeouts (vs. alarm thread)
If first call of the procedure is failed on
the open_table stage stmt_arena->state is set to
EXECUTED state. On second call(if no errors on
open_table stage) it leads to use of worng memory arena
in find_field_in_view() function as
thd->stmt_arena->is_stmt_prepare_or_first_sp_execute()
returns FALSE for EXECUTED state. The item is created
not in its own arena and it leads to crash on further
calls of the procedure.
The fix:
change state of arena only if
no errors on open_table stage happens.
mysql-test/r/sp.result:
test result
mysql-test/t/sp.test:
test case
sql/sp_head.cc:
If first call of the procedure is failed on
the open_table stage stmt_arena->state is set to
EXECUTED state. On second call(if no errors on
open_table stage) it leads to use of worng memory arena
in find_field_in_view() function as
thd->stmt_arena->is_stmt_prepare_or_first_sp_execute()
returns FALSE for EXECUTED state. The item is created
not in its own arena and it leads to crash on further
calls of the procedure.
The fix:
change state of arena only if
no errors on open_table stage happens.
------------------------------------------------------------
revno: 2617.68.25
committer: Dmitry Lenev <dlenev@mysql.com>
branch nick: mysql-next-bg-pre2-2
timestamp: Wed 2009-09-16 18:26:50 +0400
message:
Follow-up for one of pre-requisite patches for fixing bug #30977
"Concurrent statement using stored function and DROP FUNCTION
breaks SBR".
Made enum_mdl_namespace enum part of MDL_key class and removed MDL_
prefix from the names of enum members. In order to do the latter
changed name of PROCEDURE symbol to PROCEDURE_SYM (otherwise macro
which was automatically generated for this symbol conflicted with
MDL_key::PROCEDURE enum member).
------------------------------------------------------------
revno: 2617.68.24
committer: Dmitry Lenev <dlenev@mysql.com>
branch nick: mysql-next-bg-pre2-2
timestamp: Wed 2009-09-16 17:25:29 +0400
message:
Pre-requisite patch for fixing bug #30977 "Concurrent statement
using stored function and DROP FUNCTION breaks SBR".
Added MDL_request for stored routine as member to Sroutine_hash_entry
in order to be able perform metadata locking for stored routines in
future (Sroutine_hash_entry is an equivalent of TABLE_LIST class for
stored routines).
(WL#4284, follow up fixes).
sql/mdl.cc:
Introduced version of MDL_request::init() method which initializes
lock request using pre-built MDL key.
MDL_key::table_name/table_name_length() getters were
renamed to reflect the fact that MDL_key objects are
now created not only for tables.
sql/mdl.h:
Extended enum_mdl_namespace enum with values which correspond
to namespaces for stored functions and triggers.
Renamed MDL_key::table_name/table_name_length() getters
to MDL_key::name() and name_length() correspondingly to
reflect the fact that MDL_key objects are now created
not only for tables.
Added MDL_key::mdl_namespace() getter.
Also added version of MDL_request::init() method which
initializes lock request using pre-built MDL key.
sql/sp.cc:
Added MDL_request for stored routine as member to Sroutine_hash_entry.
Changed code to use MDL_key from this request as a key for LEX::sroutines
set. Removed separate "key" member from Sroutine_hash_entry as it became
unnecessary.
sql/sp.h:
Added MDL_request for stored routine as member to Sroutine_hash_entry
in order to be able perform metadata locking for stored routines in
future (Sroutine_hash_entry is an equivalent of TABLE_LIST class for
stored routines).
Removed Sroutine_hash_entry::key member as now we can use MDL_key from
this request as a key for LEX::sroutines set.
sql/sp_head.cc:
Removed sp_name::m_sroutines_key member and set_routine_type() method.
Since key for routine in LEX::sroutines set has no longer sp_name::m_qname
as suffix we won't save anything by creating it at sp_name construction
time.
Adjusted sp_name constructor used for creating temporary objects for
lookups in SP-cache to accept MDL_key as parameter and to avoid any
memory allocation.
Finally, removed sp_head::m_soutines_key member for reasons similar
to why sp_name::m_sroutines_key was removed
sql/sp_head.h:
Removed sp_name::m_sroutines_key member and set_routine_type() method.
Since key for routine in LEX::sroutines set has no longer sp_name::m_qname
as suffix we won't save anything by creating it at sp_name construction
time.
Adjusted sp_name constructor used for creating temporary objects for
lookups in SP-cache to accept MDL_key as parameter and to avoid any
memory allocation.
Finally, removed sp_head::m_soutines_key member for reasons similar
to why sp_name::m_sroutines_key was removed.
sql/sql_base.cc:
Adjusted code to the fact that we now use MDL_key from
Sroutine_hash_entry::mdl_request as a key for LEX::sroutines set.
MDL_key::table_name/table_name_length() getters were
renamed to reflect the fact that MDL_key objects are
now created not only for tables.
sql/sql_trigger.cc:
sp_add_used_routine() now takes MDL_key as parameter as now we use
instance of this class as a key for LEX::sroutines set.
