Enable unusable key notes for non-equality predicates:
<, <=, =>, >, BETWEEN, IN, LIKE
Note, in some scenarios it displays duplicate notes, e.g.
for queries with ORDER BY:
SELECT * FROM t1
WHERE indexed_string_column >= 10
ORDER BY indexed_string_column
LIMIT 5;
This should be tolarable. Getting rid of the diplicate note
completely would need a much more complex patch, which is
not desiable in 10.6.
Details:
- Changing RANGE_OPT_PARAM::note_unusable_keys from bool
to a new data type Item_func::Bitmap, so the caller can
choose with a better granuality which predicates
should raise unusable key notes inside the range optimizer:
a. all predicates (=, <=>, <, <=, =>, >, BETWEEN, IN, LIKE)
b. all predicates except equality (=, <=>)
c. none of the predicates
"b." is needed because in some scenarios equality predicates (=, <=>)
send unusable key notes at an earlier stage, before the range optimizer,
during update_ref_and_keys(). Calling the range optimizer with
"all predicates" would produce duplicate notes for = and <=> in such cases.
- Fixing get_quick_record_count() to call the range optimizer
with "all predicates except equality" instead of "none of the predicates".
Before this change the range optimizer suppressed all notes for
non-equality predicates: <, <=, =>, >, BETWEEN, IN, LIKE.
This actually fixes the reported problem.
- Fixing JOIN::make_range_rowid_filters() to call the range optimizer
with "all predicates except equality" instead of "all predicates".
Before this change the range optimizer produced duplicate notes
for = and <=> during a rowid_filter optimization.
- Cleanup:
Adding the op_collation argument to Field::raise_note_cannot_use_key_part()
and displaying the operation collation rather than the argument collation
in the unusable key note. This is important for operations with more than
two arguments: BETWEEN and IN, e.g.:
SELECT * FROM t1
WHERE column_utf8mb3_general_ci
BETWEEN 'a' AND 'b' COLLATE utf8mb3_unicode_ci;
SELECT * FROM t1
WHERE column_utf8mb3_general_ci
IN ('a', 'b' COLLATE utf8mb3_unicode_ci);
The note for 'a' now prints utf8mb3_unicode_ci as the collation.
which is the collation of the entire operation:
Cannot use key key1 part[0] for lookup:
"`column_utf8mb3_general_ci`" of collation `utf8mb3_general_ci` >=
"'a'" of collation `utf8mb3_unicode_ci`
Before this change it printed the collation of 'a',
so the note was confusing:
Cannot use key key1 part[0] for lookup:
"`column_utf8mb3_general_ci`" of collation `utf8mb3_general_ci` >=
"'a'" of collation `utf8mb3_general_ci`"
First UPDATE under START TRANSACTION does nothing (nstate= nstate),
but anyway generates history. Since update vector is empty we get into
(!uvect->n_fields) branch which only adds history row, but does not do
update. After that we get current row with wrong (old) row_start value
and because of that second UPDATE tries to insert history row again
because it sees trx->id != row_start which is the guard to avoid
inserting multiple trx_id-based history rows under same transaction
(because we have same trx_id and we get duplicate error and this bug
demostrates that). But this try anyway fails because PK is based on
row_end which is constant under same transaction, so PK didn't change.
The fix moves vers_make_update() to an earlier stage of
calc_row_difference(). Therefore it prepares update vector before
(!uvect->n_fields) check and never gets into that branch, hence no
need to handle versioning inside that condition anymore.
Now trx->id and row_start are equal after first UPDATE and we don't
try to insert second history row.
== Cleanups and improvements ==
ha_innobase::update_row():
vers_set_fields and vers_ins_row are cleaned up into direct condition
check. SQLCOM_ALTER_TABLE check now is not used as this is dead code,
assertion is done instead.
upd_node->is_delete is set in calc_row_difference() just to keep
versioning code as much in one place as possible. vers_make_delete()
is still located in row_update_for_mysql() as this is required for
ha_innodbase::delete_row() as well.
row_ins_duplicate_error_in_clust():
Restrict DB_FOREIGN_DUPLICATE_KEY to the better conditions.
VERSIONED_DELETE is used specifically to help lower stack to
understand what caused current insert. Related to MDEV-29813.
The new statistics is enabled by adding the "engine", "innodb" or "full"
option to --log-slow-verbosity
Example output:
# Pages_accessed: 184 Pages_read: 95 Pages_updated: 0 Old_rows_read: 1
# Pages_read_time: 17.0204 Engine_time: 248.1297
Page_read_time is time doing physical reads inside a storage engine.
(Writes cannot be tracked as these are usually done in the background).
Engine_time is the time spent inside the storage engine for the full
duration of the read/write/update calls. It uses the same code as
'analyze statement' for calculating the time spent.
The engine statistics is done with a generic interface that should be
easy for any engine to use. It can also easily be extended to provide
even more statistics.
Currently only InnoDB has counters for Pages_% and Undo_% status.
Engine_time works for all engines.
Implementation details:
class ha_handler_stats holds all engine stats. This class is included
in handler and THD classes.
While a query is running, all statistics is updated in the handler. In
close_thread_tables() the statistics is added to the THD.
handler::handler_stats is a pointer to where statistics should be
collected. This is set to point to handler::active_handler_stats if
stats are requested. If not, it is set to 0.
handler_stats has also an element, 'active' that is 1 if stats are
requested. This is to allow engines to avoid doing any 'if's while
updating the statistics.
Cloned or partition tables have the pointer set to the base table if
status are requested.
There is a small performance impact when using --log-slow-verbosity=engine:
- All engine calls in 'select' will be timed.
- IO calls for InnoDB reads will be timed.
- Incrementation of counters are done on local variables and accesses
are inline, so these should have very little impact.
- Statistics has to be reset for each statement for the THD and each
used handler. This is only 40 bytes, which should be neglectable.
- For partition tables we have to loop over all partitions to update
the handler_status as part of table_init(). Can be optimized in the
future to only do this is log-slow-verbosity changes. For this to work
we have to update handler_status for all opened partitions and
also for all partitions opened in the future.
Other things:
- Added options 'engine' and 'full' to log-slow-verbosity.
- Some of the new files in the test suite comes from Percona server, which
has similar status information.
- buf_page_optimistic_get(): Do not increment any counter, since we are
only validating a pointer, not performing any buf_pool.page_hash lookup.
- Added THD argument to save_explain_data_intern().
- Switched arguments for save_explain_.*_data() to have
always THD first (generates better code as other functions also have THD
first).
EXPLAIN EXTENDED for an UPDATE/DELETE/INSERT/REPLACE statement did not
produce the warning containing the text representation of the query
obtained after the optimization phase. Such warning was produced for
SELECT statements, but not for DML statements.
The patch fixes this defect of EXPLAIN EXTENDED for DML statements.
1. Store assignment failures on incompatible data types now raise errors if:
- STRICT_ALL_TABLES or STRICT_TRANS_TABLES sql_mode is used, and
- IGNORE is not used
Otherwise, only a warning is raised and the statement continues.
2. Changing the error/warning test as follows:
-ERROR HY000: Illegal parameter data types inet6 and int for operation 'SET'
+ERROR HY000: Cannot cast 'int' as 'inet6' in assignment of `db`.`t`.`col`
so in case of a big table it's easier to see which column has the problem.
The new error text is also applied to SP variables.
Remove table_count from Query_tables_list (not used, moved to MYSQL_LOCK).
Rename table_count from LEX to avoid mixing it with other counters of tables.
Now INSERT, UPDATE, ALTER statements involving incompatible data type pairs, e.g.:
UPDATE TABLE t1 SET col_inet6=col_int;
INSERT INTO t1 (col_inet6) SELECT col_in FROM t2;
ALTER TABLE t1 MODIFY col_inet6 INT;
consistently return an error at the statement preparation time:
ERROR HY000: Illegal parameter data types inet6 and int for operation 'SET'
and abort the statement before starting interating rows.
This error is the same with what is raised for queries like:
SELECT col_inet6 FROM t1 UNION SELECT col_int FROM t2;
SELECT COALESCE(col_inet6, col_int) FROM t1;
Before this change the error was caught only during the execution time,
when a Field_xxx::store_xxx() was called for the very firts row.
The behavior was not consistent between various statements and could do different things:
- abort the statement
- set a column to the data type default value (e.g. '::' for INET6)
- set a column to NULL
A typical old error was:
ERROR 22007: Incorrect inet6 value: '1' for column `test`.`t1`.`a` at row 1
EXCEPTION:
Note, there is an exception: a multi-row INSERT..VALUES, e.g.:
INSERT INTO t1 (col_a,col_b) VALUES (a1,b1),(a2,b2);
checks assignment compability at the preparation time for the very first row only:
(col_a,col_b) vs (a1,b1)
Other rows are still checked at the execution time and return the old warnings
or errors in case of a failure. This is done because catching all rows at the
preparation time would change behavior significantly. So it still works
according to the STRICT_XXX_TABLES sql_mode flags and the table transaction ability.
This is too late to change this behavior in 10.7.
There is no a firm decision yet if a multi-row INSERT..VALUES
behavior will change in later versions.
Cause: a copy of the joined TABLE_LIST is created during multi_update::prepare
and TABLE::pos_in_table_list of the tables are set to point to the new
TABLE_LIST object. This prevents some optimization steps to perform correctly.
Solution: do not update pos_in_table_list during multi_update::prepare
If UPDATE/DELETE does not change data it is skipped from
replication. We now force replication of such events when they trigger
partition auto-creation.
For ROLLBACK it is as simple as set OPTION_KEEP_LOG
flag. trans_cannot_safely_rollback() does the rest.
For UPDATE/DELETE .. LIMIT 0 we make additional binlog_query() calls
at the early points of return.
As a safety measure we also convert row format into statement if it is
needed. The condition is decided by
binlog_need_stmt_format(). Basically if there are some row events in
cache we don't need that: table open of row event will trigger
auto-creation anyway.
Multi-update/delete works via mysql_select(). There is no early points
of return, so binlogging is always checked by
send_eof()/abort_resultset(). But we must comply with the above
measure of converting into statement.
not every index-using plan sets bits in table->quick_keys.
QUICK_ROR_INTERSECT_SELECT, for example, doesn't.
Use the fact that select->quick is set instead.
Also allow EXPLAIN to work.
