opt_kill_long_query_type being an enum could be 0 corresponding
to ALL. When ALL is specified, the CONNECTION ADMIN is still
required.
Also check REPLICA MONITOR privilege and make the tests
find the results by recording stderr.
Noticed thanks to bug report by Tim van Dijen.
Fixes: 79b58f1ca8
Problem:
The file backup-my.cnf from the backup directory was loaded by
"mariabackup --prepare" only in case of the explicit --target-dir given.
It was not loaded from the default directory ./xtrabackup_backupfiles/
in case if the explicit --target-dir was missing.
In other words, it worked as follows:
1. When started as "mariabackup --prepare --target-dir=DIR", mariabackup:
a. loads defaults from "DIR/backup-my.cnf"
b. processes data files in the specified directory DIR
2. When started as "mariabackup --prepare", mariabackup:
a. does not load defaults from "./xtrabackup_backupfiles/backup-my.cnf"
b. processes data files in the default directory "./xtrabackup_backupfiles/"
This patch fixes the second scenario, so it works as follows:
2. When started as "mariabackup --prepare", mariabackup:
a. loads defaults from "./xtrabackup_backupfiles/backup-my.cnf"
b. processes data files in the default directory "./xtrabackup_backupfiles/"
This change fixes (among others) the problem with the
"Can't open shared library '/file_key_management.so'" error
reported when "mariabackup --prepare" is used without --target-dir
in combinaton with the encryption plugin.
Revert the patch for MDEV-18917, which removed this functionality.
This restores that mariabackup --prepare recovers the transactional
binlog position from the redo log, and writes it to the file
xtrabackup_binlog_pos_innodb.
This position is updated only on every InnoDB commit. This means that
if the last event in the binlog at the time of backup is a DDL or
non-transactional update, the recovered position from --no-lock will
be behind the state of the backup.
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
The motivation of introducing the parameter
innodb_purge_rseg_truncate_frequency in
mysql/mysql-server@28bbd66ea5 and
mysql/mysql-server@8fc2120fed
seems to have been to avoid stalls due to freeing undo log pages
or truncating undo log tablespaces. In MariaDB Server,
innodb_undo_log_truncate=ON should be a much lighter operation
than in MySQL, because it will not involve any log checkpoint.
Another source of performance stalls should be
trx_purge_truncate_rseg_history(), which is shrinking the history list
by freeing the undo log pages whose undo records have been purged.
To alleviate that, we will introduce a purge_truncation_task that will
offload this from the purge_coordinator_task. In that way, the next
innodb_purge_batch_size pages may be parsed and purged while the pages
from the previous batch are being freed and the history list being shrunk.
The processing of innodb_undo_log_truncate=ON will still remain the
responsibility of the purge_coordinator_task.
purge_coordinator_state::count: Remove. We will ignore
innodb_purge_rseg_truncate_frequency, and act as if it had been
set to 1 (the maximum shrinking frequency).
purge_coordinator_state::do_purge(): Invoke an asynchronous task
purge_truncation_callback() to free the undo log pages.
purge_sys_t::iterator::free_history(): Free those undo log pages
that have been processed. This used to be a part of
trx_purge_truncate_history().
purge_sys_t::clone_end_view(): Take a new value of purge_sys.head
as a parameter, so that it will be updated while holding exclusive
purge_sys.latch. This is needed for race-free access to the field
in purge_truncation_callback().
Reviewed by: Vladislav Lesin
The MDEV-29693 conflict resolution is from Monty, as well as is
a bug fix where ANALYZE TABLE wrongly built histograms for
single-column PRIMARY KEY.
Also includes a fix for safe_malloc error reporting.
Other things:
- Copied main.log_slow from 10.4 to avoid mtr issue
Disabled test:
- spider/bugfix.mdev_27239 because we started to get
+Error 1429 Unable to connect to foreign data source: localhost
-Error 1158 Got an error reading communication packets
- main.delayed
- Bug#54332 Deadlock with two connections doing LOCK TABLE+INSERT DELAYED
This part is disabled for now as it fails randomly with different
warnings/errors (no corruption).
There are many filesystem related errors that can occur with
MariaBackup. These already outputed to stderr with a good description of
the error. Many of these are permission or resource (file descriptor)
limits where the assertion and resulting core crash doesn't offer
developers anything more than the log message. To the user, assertions
and core crashes come across as poor error handling.
As such we return an error and handle this all the way up the stack.
log_t::create(), log_t::attach(): Return whether the initialisation
succeeded. It may fail if too large an innodb_log_buffer_size is specified.
recv_sys_t::close_files(): Actually close the data files so that the
test mariabackup.huge_lsn,strict_crc32 will not fail on Microsoft Windows
when renaming ib_logfile101 due to a leaked file handle of ib_logfile0.
recv_sys_t::find_checkpoint(): Register recv_sys.files[0] as OS_FILE_CLOSED
because the file handle has already been attached to log_sys.log and
we do not want to close the file twice.
recv_sys_t::read(): Access the first log file via log_sys.log.
This is a port of commit 6e9b421f77
adapted to commit 685d958e38 (MDEV-14425).
The test case is omitted, because it would fail to fail when the log
is stored in persistent memory (or "fake PMEM" on Linux /dev/shm).
There are many filesystem related errors that can occur with
MariaBackup. These already outputed to stderr with a good description of
the error. Many of these are permission or resource (file descriptor)
limits where the assertion and resulting core crash doesn't offer
developers anything more than the log message. To the user, assertions
and core crashes come across as poor error handling.
As such we return an error and handle this all the way up the stack.
The crash happened in filename_to_spacename() when using it on a
filename that is not in the format of "./database/table.ibd".
According to Marko, it is possible the function is called with
the path to an undo file, which would cause a crash.
This patch fixes this by, instead of crashing with unexpected filenames,
returning them 'as such', except for changing all '\' to '/'.
The progress reporting of InnoDB crash recovery was rather intermittent.
Nothing was reported during the single-threaded log record parsing, which
could consume minutes when parsing a large log. During log application,
there only was progress reporting in background threads that would be
invoked on data page read completion.
The progress reporting here will be detailed like this:
InnoDB: Starting crash recovery from checkpoint LSN=503549688
InnoDB: Parsed redo log up to LSN=1990840177; to recover: 124806 pages
InnoDB: Parsed redo log up to LSN=2729777071; to recover: 186123 pages
InnoDB: Parsed redo log up to LSN=3488599173; to recover: 248397 pages
InnoDB: Parsed redo log up to LSN=4177856618; to recover: 306469 pages
InnoDB: Multi-batch recovery needed at LSN 4189599815
InnoDB: End of log at LSN=4483551634
InnoDB: To recover: LSN 4189599815/4483551634; 307490 pages
InnoDB: To recover: LSN 4189599815/4483551634; 197159 pages
InnoDB: To recover: LSN 4189599815/4483551634; 67623 pages
InnoDB: Parsed redo log up to LSN=4353924218; to recover: 102083 pages
...
InnoDB: log sequence number 4483551634 ...
The previous messages "Starting a batch to recover" or
"Starting a final batch to recover" will be replaced by
"To recover: ... pages" messages.
If a batch lasts longer than 15 seconds, then there will be
progress reports every 15 seconds, showing the number of remaining pages.
For the non-final batch, the "To recover:" message includes two end LSN:
that of the batch, and of the recovered log. This is the primary measure
of progress. The batch will end once the number of pages to recover
reaches 0.
If recovery is possible in a single batch, the output will look like this,
with a shorter "To recover:" message that counts only the remaining pages:
InnoDB: Starting crash recovery from checkpoint LSN=503549688
InnoDB: Parsed redo log up to LSN=1998701027; to recover: 125560 pages
InnoDB: Parsed redo log up to LSN=2734136874; to recover: 186446 pages
InnoDB: Parsed redo log up to LSN=3499505504; to recover: 249378 pages
InnoDB: Parsed redo log up to LSN=4183247844; to recover: 306964 pages
InnoDB: End of log at LSN=4483551634
...
InnoDB: To recover: 331797 pages
...
InnoDB: log sequence number 4483551634 ...
We will also speed up recovery by improving the memory management and
implementing multi-threaded recovery of data pages that will not need
to be read into the buffer pool ("fake read"). Log application in the
"fake read" threads will be protected by an atomic being_recovered field
and exclusive buf_page_t::latch.
Recovery will reserve for data pages two thirds of the buffer pool,
or 256 pages, whichever is smaller. Previously, we could only use at most
one third of the buffer pool for buffered log records. This would typically
mean that with large buffer pools, recovery unnecessary consisted of
multiple batches.
If recovery runs out of memory, it will "roll back" or "rewind" the current
mini-transaction. The recv_sys.lsn and recv_sys.pages will correspond
to the "out of memory LSN", at the end of the previous complete
mini-transaction.
If recovery runs out of memory while executing the final recovery batch,
we can simply invoke recv_sys.apply(false) to make room, and resume
parsing.
If recovery runs out of memory before the final batch, we will scan
the redo log to the end (recv_sys.scanned_lsn) and check for any missing
or inconsistent files. If recv_init_crash_recovery_spaces() does not
report any potentially missing tablespaces, we can make use of the
already stored recv_sys.pages and only rewind to the "out of memory LSN".
Else, we must keep parsing and invoking recv_validate_tablespace()
until an error has been found or everything has been resolved, and
ultimatily rewind to to the checkpoint LSN.
recv_sys_t::pages_it: A cached iterator to recv_sys.pages
recv_sys_t::parse_mtr(): Remove an ATTRIBUTE_NOINLINE that would
prevent tail call optimization in recv_sys_t::parse_pmem().
recv_sys_t::parse(), recv_sys_t::parse_mtr(), recv_sys_t::parse_pmem():
Add template<bool store> parameter. Redo log record parsing
(store=false) is better specialized from store=true
(with bool if_exists) so that we can avoid some conditional branches
in frequently invoked low-level code.
recv_sys_t::is_memory_exhausted(): Remove. The special parse() status
GOT_OOM will report out-of-memory situation at the low level.
recv_sys_t::rewind(), page_recv_t::recs_t::rewind():
Remove all log starting with a specific LSN.
recv_scan_log(): Separate some code for only parsing, not storing log.
In rewound_lsn, remember the LSN at which last_phase=false recovery
ran out of memory. This is where the next call to recv_scan_log()
will resume storing the log. This replaces recv_sys.last_stored_lsn.
recv_sys_t::parse(): Evaluate the template parameter store in a few more
cases, to allow dead code to be eliminated at compile time.
recv_sys_t::scanned_lsn: The end of the log found by recv_scan_log().
The special value 1 means that recv_sys has been initialized but
no log has been parsed.
IORequest::write_complete(), IORequest::read_complete():
Replaces fil_aio_callback().
read_io_callback(), write_io_callback(): Replaces io_callback().
IORequest::fake_read_complete(), fake_io_callback(), os_fake_read():
Process a "fake read" request for concurrent recovery.
recv_sys_t::apply_batch(): Choose a number of successive pages
for a recovery batch.
recv_sys_t::erase(recv_sys_t::map::iterator): Remove log records for a
page whose recovery is not in progress. Log application threads
will not invoke this; they will only set being_recovered=-1 to indicate
that the entry is no longer needed.
recv_sys_t::garbage_collect(): Remove all being_recovered=-1 entries.
recv_sys_t::wait_for_pool(): Wait for some space to become available
in the buffer pool.
mlog_init_t::mark_ibuf_exist(): Avoid calls to
recv_sys::recover_low() via ibuf_page_exists() and buf_page_get_low().
Such calls would lead to double locking of recv_sys.mutex, which
depending on implementation could cause a deadlock. We will use
lower-level calls to look up index pages.
buf_LRU_block_remove_hashed(): Disable consistency checks for freed
ROW_FORMAT=COMPRESSED pages. Their contents could be uninitialized garbage.
This fixes an occasional failure of the test
innodb.innodb_bulk_create_index_debug.
Tested by: Matthias Leich
- `mariadb-backup --backup` was fixed to fetch the value of the
@@aria_log_dir_path server variable and copy aria_log* files
from @@aria_log_dir_path directory to the backup directory.
Absolute and relative (to --datadir) paths are supported.
Before this change aria_log* files were copied to the backup
only if they were in the default location in @@datadir.
- `mariadb-backup --copy-back` now understands a new my.cnf and command line
parameter --aria-log-dir-path.
`mariadb-backup --copy-back` in the main loop in copy_back()
(when copying back from the backup directory to --datadir)
was fixed to ignore all aria_log* files.
A new function copy_back_aria_logs() was added.
It consists of a separate loop copying back aria_log* files from
the backup directory to the directory specified in --aria-log-dir-path.
Absolute and relative (to --datadir) paths are supported.
If --aria-log-dir-path is not specified,
aria_log* files are copied to --datadir by default.
- The function is_absolute_path() was fixed to understand MTR style
paths on Windows with forward slashes, e.g.
--aria-log-dir-path=D:/Buildbot/amd64-windows/build/mysql-test/var/...
fil_space_t::create(), fil_space_t::add(): Expect the caller to
acquire and release fil_system.mutex. In this way, creating a tablespace
and adding the first (usually only) data file will be atomic.
recv_sys_t::recover_deferred(): Correctly protect some changes by
holding fil_system.mutex.
Tested by: Matthias Leich
This is a non-functional change.
simplifying the code logic:
- removing global variables ds_data and ds_meta
- passing these variables as parameters to functions instead
- adding helper classes: Datasink_free_list and Backup_datasinks
- moving some function accepting a ds_ctxt parameter
as methods to ds_ctxt.
server has systemd support and calls sd_notify() to communicate
the status to systemd.
mariabackup links the whole server in, but it should not notify
systemd, because it's not started or managed by systemd.
The solution is to suppress error messages for missing tablespaces if
mariabackup is launched with "--prepare --export" options.
"mariabackup --prepare --export" invokes itself with --mysqld parameter.
If the parameter is set, then it starts server to feed "FLUSH TABLES ...
FOR EXPORT;" queries for exported tablespaces. This is "normal" server
start, that's why new srv_operation value is introduced.
Reviewed by Marko Makela.
fil_node_open_file_low() tries to close files from the top of
fil_system.space_list if the number of opened files is exceeded.
It invokes fil_space_t::try_to_close(), which iterates the list searching
for the first opened space. Then it just closes the space, leaving it in
the same position in fil_system.space_list.
On heavy files opening, like during 'SHOW TABLE STATUS ...' execution,
if the number of opened files limit is reached,
fil_space_t::try_to_close() iterates more and more closed spaces before
reaching any opened space for each fil_node_open_file_low() call. What
causes performance regression if the number of spaces is big enough.
The fix is to keep opened spaces at the top of fil_system.space_list,
and move closed files at the end of the list.
For this purpose fil_space_t::space_list_last_opened pointer is
introduced. It points to the last inserted opened space in
fil_space_t::space_list. When space is opened, it's inserted to the
position just after the pointer points to in fil_space_t::space_list to
preserve the logic, inroduced in MDEV-23855. Any closed space is added
to the end of fil_space_t::space_list.
As opened spaces are located at the top of fil_space_t::space_list,
fil_space_t::try_to_close() finds opened space faster.
There can be the case when opened and closed spaces are mixed in
fil_space_t::space_list if fil_system.freeze_space_list was set during
fil_node_open_file_low() execution. But this should not cause any error,
as fil_space_t::try_to_close() still iterates spaces in the list.
There is no need in any test case for the fix, as it does not change any
functionality, but just fixes performance regression.
