buf_read_page_low(): Use 64-bit arithmetics when computing the
file byte offset. In other calls to fil_space_t::io() the offset
was being computed correctly, for example by
buf_page_t::physical_offset().
buf_read_page_low(): Remove an error message and a debug assertion
that can be triggered when using innodb_page_size=4k and
innodb_file_per_table=0. In that case, buf_read_ahead_linear()
may be invoked on page 255, which is one less than the first
page of the doublewrite buffer (256).
fil_space_t::flush_freed(): Renamed from buf_flush_freed_pages();
this is a backport of aa45850687 from 10.6.
Invoke log_write_up_to() on last_freed_lsn, instead of avoiding
the operation when the log has not yet been written.
A more costly alternative would be that log_checkpoint() would invoke
this function on every affected tablespace.
buf_read_ahead_linear(): Correct some calculations that were broken
in commit b1ab211dee (MDEV-15053).
Thanks to Daniel Black for providing a test case and initial debugging.
Tested by: Matthias Leich
As btrfs showed, a partial read of data in AIO /O_DIRECT circumstances can
really confuse MariaDB.
Filipe Manana (SuSE)[1] showed how database programmers can assume
O_DIRECT is all or nothing.
While a fix was done in the kernel side, we can do better in our code by
requesting that the rest of the block be read/written synchronously if
we do only get a partial read/write.
Per the APIs, a partial read/write can occur before an error, so
reattempting the request will leave the caller with a concrete error to
handle.
[1] https://lore.kernel.org/linux-btrfs/CABVffENfbsC6HjGbskRZGR2NvxbnQi17gAuW65eOM+QRzsr8Bg@mail.gmail.com/T/#mb2738e675e48e0e0778a2e8d1537dec5ec0d3d3a
Also spell synchronously correctly in other files.
Any modification of buf_pool.page_hash is supposed to be protected
by buf_pool.mutex and page_hash_latch::write_lock(). The buffer pool
watch mechanism of the InnoDB change buffer was violating that
ever since commit b1ab211dee (MDEV-15053).
buf_pool_t::watch_set(): Extend the critical section of buf_pool.mutex.
buf_pool_t::watch_unset(): Define non-inline, because
calls are infrequent and this function became larger.
If we have to detach a sentinel from page_hash,
do it while holding both the mutex and the exclusive hash latch.
buf_pool_t::watch_remove(): Assert that the mutex is being held.
buf_page_init_for_read(): Remove some work-arounds for
previously encountered race conditions related to buf_pool.watch.
buf_read_page_background(): Remove the parameter "bool sync"
and always actually initiate a page read in the background.
buf_load(): Always submit asynchronous reads. This allows
page checksums to be verified in concurrent threads as
soon as the reads are completed.
buf_read_ibuf_merge_pages(): If space->size is 0, invoke
fil_space_get_size() to determine the size of the tablespace
by reading the header page. Only after that proceed to delete
any entries that are beyond the end of the tablespace.
Otherwise, we could be deleting valid entries that actually
need to be applied.
This fixes a regression that had been introduced in
commit b80df9eba2 (MDEV-21069),
which aimed to avoid crashes during DROP TABLE of corrupted tables.
buf_read_ahead_random(): Do not leak a tablespace reference.
The reference was already acquired in fil_space_t::get(),
and we must only check that operations were not stopped.
This error was introduced when
commit 118e258aaa
merged n_pending_ios, n_pending_ops into a single n_pending.
This was not noticed earlier, because innodb_random_read_ahead
is OFF by default and our regression tests did not vary that
parameter at all.
Merge n_pending_ios, n_pending_ops to std::atomic<uint32_t> n_pending.
Change some more fil_space_t members to uint32_t to reduce
the memory footprint.
fil_space_t::add(), fil_ibd_create(): Attach the already opened
handle to the tablespace, and enforce the fil_system.n_open limit.
dict_boot(): Initialize fil_system.max_assigned_id.
srv_boot(): Call srv_thread_pool_init() before anything else,
so that files should be opened in the correct mode on Windows.
fil_ibd_create(): Create the file in OS_FILE_AIO mode, just like
fil_node_open_file_low() does it.
dict_table_t::is_accessible(): Replaces fil_table_accessible().
Reviewed by: Vladislav Vaintroub
Also fixes MDEV-23929: innodb_flush_neighbors is not being ignored
for system tablespace on SSD
When the maximum configured number of file is exceeded, InnoDB will
close data files. We used to maintain a fil_system.LRU list and
a counter fil_node_t::n_pending to achieve this, at the huge cost
of multiple fil_system.mutex operations per I/O operation.
fil_node_open_file_low(): Implement a FIFO replacement policy:
The last opened file will be moved to the end of fil_system.space_list,
and files will be closed from the start of the list. However, we will
not move tablespaces in fil_system.space_list while
i_s_tablespaces_encryption_fill_table() is executing
(producing output for INFORMATION_SCHEMA.INNODB_TABLESPACES_ENCRYPTION)
because it may cause information of some tablespaces to go missing.
We also avoid this in mariabackup --backup because datafiles_iter_next()
assumes that the ordering is not changed.
IORequest: Fold more parameters to IORequest::type.
fil_space_t::io(): Replaces fil_io().
fil_space_t::flush(): Replaces fil_flush().
OS_AIO_IBUF: Remove. We will always issue synchronous reads of the
change buffer pages in buf_read_page_low().
We will always ignore some errors for background reads.
This should reduce fil_system.mutex contention a little.
fil_node_t::complete_write(): Replaces fil_node_t::complete_io().
On both read and write completion, fil_space_t::release_for_io()
will have to be called.
fil_space_t::io(): Do not acquire fil_system.mutex in the normal
code path.
xb_delta_open_matching_space(): Do not try to open the system tablespace
which was already opened. This fixes a file sharing violation in
mariabackup --prepare --incremental.
Reviewed by: Vladislav Vaintroub
After MDEV-15053, MDEV-22871, MDEV-23399 shifted the scalability
bottleneck, log checkpoints became a new bottleneck.
If innodb_io_capacity is set low or innodb_max_dirty_pct_lwm is
set high and the workload fits in the buffer pool, the page cleaner
thread will perform very little flushing. When we reach the capacity
of the circular redo log file ib_logfile0 and must initiate a checkpoint,
some 'furious flushing' will be necessary. (If innodb_flush_sync=OFF,
then flushing would continue at the innodb_io_capacity rate, and
writers would be throttled.)
We have the best chance of advancing the checkpoint LSN immediately
after a page flush batch has been completed. Hence, it is best to
perform checkpoints after every batch in the page cleaner thread,
attempting to run once per second.
By initiating high-priority flushing in the page cleaner as early
as possible, we aim to make the throughput more stable.
The function buf_flush_wait_flushed() used to sleep for 10ms, hoping
that the page cleaner thread would do something during that time.
The observed end result was that a large number of threads that call
log_free_check() would end up sleeping while nothing useful is happening.
We will revise the design so that in the default innodb_flush_sync=ON
mode, buf_flush_wait_flushed() will wake up the page cleaner thread
to perform the necessary flushing, and it will wait for a signal from
the page cleaner thread.
If innodb_io_capacity is set to a low value (causing the page cleaner to
throttle its work), a write workload would initially perform well, until
the capacity of the circular ib_logfile0 is reached and log_free_check()
will trigger checkpoints. At that point, the extra waiting in
buf_flush_wait_flushed() will start reducing throughput.
The page cleaner thread will also initiate log checkpoints after each
buf_flush_lists() call, because that is the best point of time for
the checkpoint LSN to advance by the maximum amount.
Even in 'furious flushing' mode we invoke buf_flush_lists() with
innodb_io_capacity_max pages at a time, and at the start of each
batch (in the log_flush() callback function that runs in a separate
task) we will invoke os_aio_wait_until_no_pending_writes(). This
tweak allows the checkpoint to advance in smaller steps and
significantly reduces the maximum latency. On an Intel Optane 960
NVMe SSD on Linux, it reduced from 4.6 seconds to 74 milliseconds.
On Microsoft Windows with a slower SSD, it reduced from more than
180 seconds to 0.6 seconds.
We will make innodb_adaptive_flushing=OFF simply flush innodb_io_capacity
per second whenever the dirty proportion of buffer pool pages exceeds
innodb_max_dirty_pages_pct_lwm. For innodb_adaptive_flushing=ON we try
to make page_cleaner_flush_pages_recommendation() more consistent and
predictable: if we are below innodb_adaptive_flushing_lwm, let us flush
pages according to the return value of af_get_pct_for_dirty().
innodb_max_dirty_pages_pct_lwm: Revert the change of the default value
that was made in MDEV-23399. The value innodb_max_dirty_pages_pct_lwm=0
guarantees that a shutdown of an idle server will be fast. Users might
be surprised if normal shutdown suddenly became slower when upgrading
within a GA release series.
innodb_checkpoint_usec: Remove. The master task will no longer perform
periodic log checkpoints. It is the duty of the page cleaner thread.
log_sys.max_modified_age: Remove. The current span of the
buf_pool.flush_list expressed in LSN only matters for adaptive
flushing (outside the 'furious flushing' condition).
For the correctness of checkpoints, the only thing that matters is
the checkpoint age (log_sys.lsn - log_sys.last_checkpoint_lsn).
This run-time constant was also reported as log_max_modified_age_sync.
log_sys.max_checkpoint_age_async: Remove. This does not serve any
purpose, because the checkpoints will now be triggered by the page
cleaner thread. We will retain the log_sys.max_checkpoint_age limit
for engaging 'furious flushing'.
page_cleaner.slot: Remove. It turns out that
page_cleaner_slot.flush_list_time was duplicating
page_cleaner.slot.flush_time and page_cleaner.slot.flush_list_pass
was duplicating page_cleaner.flush_pass.
Likewise, there were some redundant monitor counters, because the
page cleaner thread no longer performs any buf_pool.LRU flushing, and
because there only is one buf_flush_page_cleaner thread.
buf_flush_sync_lsn: Protect writes by buf_pool.flush_list_mutex.
buf_pool_t::get_oldest_modification(): Add a parameter to specify the
return value when no persistent data pages are dirty. Require the
caller to hold buf_pool.flush_list_mutex.
log_buf_pool_get_oldest_modification(): Take the fall-back LSN
as a parameter. All callers will also invoke log_sys.get_lsn().
log_preflush_pool_modified_pages(): Replaced with buf_flush_wait_flushed().
buf_flush_wait_flushed(): Implement two limits. If not enough buffer pool
has been flushed, signal the page cleaner (unless innodb_flush_sync=OFF)
and wait for the page cleaner to complete. If the page cleaner
thread is not running (which can be the case durign shutdown),
initiate the flush and wait for it directly.
buf_flush_ahead(): If innodb_flush_sync=ON (the default),
submit a new buf_flush_sync_lsn target for the page cleaner
but do not wait for the flushing to finish.
log_get_capacity(), log_get_max_modified_age_async(): Remove, to make
it easier to see that af_get_pct_for_lsn() is not acquiring any mutexes.
page_cleaner_flush_pages_recommendation(): Protect all access to
buf_pool.flush_list with buf_pool.flush_list_mutex. Previously there
were some race conditions in the calculation.
buf_flush_sync_for_checkpoint(): New function to process
buf_flush_sync_lsn in the page cleaner thread. At the end of
each batch, we try to wake up any blocked buf_flush_wait_flushed().
If everything up to buf_flush_sync_lsn has been flushed, we will
reset buf_flush_sync_lsn=0. The page cleaner thread will keep
'furious flushing' until the limit is reached. Any threads that
are waiting in buf_flush_wait_flushed() will be able to resume
as soon as their own limit has been satisfied.
buf_flush_page_cleaner: Prioritize buf_flush_sync_lsn and do not
sleep as long as it is set. Do not update any page_cleaner statistics
for this special mode of operation. In the normal mode
(buf_flush_sync_lsn is not set for innodb_flush_sync=ON),
try to wake up once per second. No longer check whether
srv_inc_activity_count() has been called. After each batch,
try to perform a log checkpoint, because the best chances for
the checkpoint LSN to advance by the maximum amount are upon
completing a flushing batch.
log_t: Move buf_free, max_buf_free possibly to the same cache line
with log_sys.mutex.
log_margin_checkpoint_age(): Simplify the logic, and replace
a 0.1-second sleep with a call to buf_flush_wait_flushed() to
initiate flushing. Moved to the same compilation unit
with the only caller.
log_close(): Clean up the calculations. (Should be no functional
change.) Return whether flush-ahead is needed. Moved to the same
compilation unit with the only caller.
mtr_t::finish_write(): Return whether flush-ahead is needed.
mtr_t::commit(): Invoke buf_flush_ahead() when needed. Let us avoid
external calls in mtr_t::commit() and make the logic easier to follow
by having related code in a single compilation unit. Also, we will
invoke srv_stats.log_write_requests.inc() only once per
mini-transaction commit, while not holding mutexes.
log_checkpoint_margin(): Only care about log_sys.max_checkpoint_age.
Upon reaching log_sys.max_checkpoint_age where we must wait to prevent
the log from getting corrupted, let us wait for at most 1MiB of LSN
at a time, before rechecking the condition. This should allow writers
to proceed even if the redo log capacity has been reached and
'furious flushing' is in progress. We no longer care about
log_sys.max_modified_age_sync or log_sys.max_modified_age_async.
The log_sys.max_modified_age_sync could be a relic from the time when
there was a srv_master_thread that wrote dirty pages to data files.
Also, we no longer have any log_sys.max_checkpoint_age_async limit,
because log checkpoints will now be triggered by the page cleaner
thread upon completing buf_flush_lists().
log_set_capacity(): Simplify the calculations of the limit
(no functional change).
log_checkpoint_low(): Split from log_checkpoint(). Moved to the
same compilation unit with the caller.
log_make_checkpoint(): Only wait for everything to be flushed until
the current LSN.
create_log_file(): After checkpoint, invoke log_write_up_to()
to ensure that the FILE_CHECKPOINT record has been written.
This avoids ut_ad(!srv_log_file_created) in create_log_file_rename().
srv_start(): Do not call recv_recovery_from_checkpoint_start()
if the log has just been created. Set fil_system.space_id_reuse_warned
before dict_boot() has been executed, and clear it after recovery
has finished.
dict_boot(): Initialize fil_system.max_assigned_id.
srv_check_activity(): Remove. The activity count is counting transaction
commits and therefore mostly interesting for the purge of history.
BtrBulk::insert(): Do not explicitly wake up the page cleaner,
but do invoke srv_inc_activity_count(), because that counter is
still being used in buf_load_throttle_if_needed() for some
heuristics. (It might be cleaner to execute buf_load() in the
page cleaner thread!)
Reviewed by: Vladislav Vaintroub
InnoDB stores a 32-bit page number in page headers and in some
data structures, such as FIL_ADDR (consisting of a 32-bit page number
and a 16-bit byte offset within a page). For better compile-time
error detection and to reduce the memory footprint in some data
structures, let us use a uint32_t for the page number, instead
of ulint (size_t) which can be 64 bits.
The buffer pool refactoring in MDEV-15053 and MDEV-22871 shifted
the performance bottleneck to the page flushing.
The configuration parameters will be changed as follows:
innodb_lru_flush_size=32 (new: how many pages to flush on LRU eviction)
innodb_lru_scan_depth=1536 (old: 1024)
innodb_max_dirty_pages_pct=90 (old: 75)
innodb_max_dirty_pages_pct_lwm=75 (old: 0)
Note: The parameter innodb_lru_scan_depth will only affect LRU
eviction of buffer pool pages when a new page is being allocated. The
page cleaner thread will no longer evict any pages. It used to
guarantee that some pages will remain free in the buffer pool. Now, we
perform that eviction 'on demand' in buf_LRU_get_free_block().
The parameter innodb_lru_scan_depth(srv_LRU_scan_depth) is used as follows:
* When the buffer pool is being shrunk in buf_pool_t::withdraw_blocks()
* As a buf_pool.free limit in buf_LRU_list_batch() for terminating
the flushing that is initiated e.g., by buf_LRU_get_free_block()
The parameter also used to serve as an initial limit for unzip_LRU
eviction (evicting uncompressed page frames while retaining
ROW_FORMAT=COMPRESSED pages), but now we will use a hard-coded limit
of 100 or unlimited for invoking buf_LRU_scan_and_free_block().
The status variables will be changed as follows:
innodb_buffer_pool_pages_flushed: This includes also the count of
innodb_buffer_pool_pages_LRU_flushed and should work reliably,
updated one by one in buf_flush_page() to give more real-time
statistics. The function buf_flush_stats(), which we are removing,
was not called in every code path. For both counters, we will use
regular variables that are incremented in a critical section of
buf_pool.mutex. Note that show_innodb_vars() directly links to the
variables, and reads of the counters will *not* be protected by
buf_pool.mutex, so you cannot get a consistent snapshot of both variables.
The following INFORMATION_SCHEMA.INNODB_METRICS counters will be
removed, because the page cleaner no longer deals with writing or
evicting least recently used pages, and because the single-page writes
have been removed:
* buffer_LRU_batch_flush_avg_time_slot
* buffer_LRU_batch_flush_avg_time_thread
* buffer_LRU_batch_flush_avg_time_est
* buffer_LRU_batch_flush_avg_pass
* buffer_LRU_single_flush_scanned
* buffer_LRU_single_flush_num_scan
* buffer_LRU_single_flush_scanned_per_call
When moving to a single buffer pool instance in MDEV-15058, we missed
some opportunity to simplify the buf_flush_page_cleaner thread. It was
unnecessarily using a mutex and some complex data structures, even
though we always have a single page cleaner thread.
Furthermore, the buf_flush_page_cleaner thread had separate 'recovery'
and 'shutdown' modes where it was waiting to be triggered by some
other thread, adding unnecessary latency and potential for hangs in
relatively rarely executed startup or shutdown code.
The page cleaner was also running two kinds of batches in an
interleaved fashion: "LRU flush" (writing out some least recently used
pages and evicting them on write completion) and the normal batches
that aim to increase the MIN(oldest_modification) in the buffer pool,
to help the log checkpoint advance.
The buf_pool.flush_list flushing was being blocked by
buf_block_t::lock for no good reason. Furthermore, if the FIL_PAGE_LSN
of a page is ahead of log_sys.get_flushed_lsn(), that is, what has
been persistently written to the redo log, we would trigger a log
flush and then resume the page flushing. This would unnecessarily
limit the performance of the page cleaner thread and trigger the
infamous messages "InnoDB: page_cleaner: 1000ms intended loop took 4450ms.
The settings might not be optimal" that were suppressed in
commit d1ab89037a unless log_warnings>2.
Our revised algorithm will make log_sys.get_flushed_lsn() advance at
the start of buf_flush_lists(), and then execute a 'best effort' to
write out all pages. The flush batches will skip pages that were modified
since the log was written, or are are currently exclusively locked.
The MDEV-13670 message "page_cleaner: 1000ms intended loop took" message
will be removed, because by design, the buf_flush_page_cleaner() should
not be blocked during a batch for extended periods of time.
We will remove the single-page flushing altogether. Related to this,
the debug parameter innodb_doublewrite_batch_size will be removed,
because all of the doublewrite buffer will be used for flushing
batches. If a page needs to be evicted from the buffer pool and all
100 least recently used pages in the buffer pool have unflushed
changes, buf_LRU_get_free_block() will execute buf_flush_lists() to
write out and evict innodb_lru_flush_size pages. At most one thread
will execute buf_flush_lists() in buf_LRU_get_free_block(); other
threads will wait for that LRU flushing batch to finish.
To improve concurrency, we will replace the InnoDB ib_mutex_t and
os_event_t native mutexes and condition variables in this area of code.
Most notably, this means that the buffer pool mutex (buf_pool.mutex)
is no longer instrumented via any InnoDB interfaces. It will continue
to be instrumented via PERFORMANCE_SCHEMA.
For now, both buf_pool.flush_list_mutex and buf_pool.mutex will be
declared with MY_MUTEX_INIT_FAST (PTHREAD_MUTEX_ADAPTIVE_NP). The critical
sections of buf_pool.flush_list_mutex should be shorter than those for
buf_pool.mutex, because in the worst case, they cover a linear scan of
buf_pool.flush_list, while the worst case of a critical section of
buf_pool.mutex covers a linear scan of the potentially much longer
buf_pool.LRU list.
mysql_mutex_is_owner(), safe_mutex_is_owner(): New predicate, usable
with SAFE_MUTEX. Some InnoDB debug assertions need this predicate
instead of mysql_mutex_assert_owner() or mysql_mutex_assert_not_owner().
buf_pool_t::n_flush_LRU, buf_pool_t::n_flush_list:
Replaces buf_pool_t::init_flush[] and buf_pool_t::n_flush[].
The number of active flush operations.
buf_pool_t::mutex, buf_pool_t::flush_list_mutex: Use mysql_mutex_t
instead of ib_mutex_t, to have native mutexes with PERFORMANCE_SCHEMA
and SAFE_MUTEX instrumentation.
buf_pool_t::done_flush_LRU: Condition variable for !n_flush_LRU.
buf_pool_t::done_flush_list: Condition variable for !n_flush_list.
buf_pool_t::do_flush_list: Condition variable to wake up the
buf_flush_page_cleaner when a log checkpoint needs to be written
or the server is being shut down. Replaces buf_flush_event.
We will keep using timed waits (the page cleaner thread will wake
_at least_ once per second), because the calculations for
innodb_adaptive_flushing depend on fixed time intervals.
buf_dblwr: Allocate statically, and move all code to member functions.
Use a native mutex and condition variable. Remove code to deal with
single-page flushing.
buf_dblwr_check_block(): Make the check debug-only. We were spending
a significant amount of execution time in page_simple_validate_new().
flush_counters_t::unzip_LRU_evicted: Remove.
IORequest: Make more members const. FIXME: m_fil_node should be removed.
buf_flush_sync_lsn: Protect by std::atomic, not page_cleaner.mutex
(which we are removing).
page_cleaner_slot_t, page_cleaner_t: Remove many redundant members.
pc_request_flush_slot(): Replaces pc_request() and pc_flush_slot().
recv_writer_thread: Remove. Recovery works just fine without it, if we
simply invoke buf_flush_sync() at the end of each batch in
recv_sys_t::apply().
recv_recovery_from_checkpoint_finish(): Remove. We can simply call
recv_sys.debug_free() directly.
srv_started_redo: Replaces srv_start_state.
SRV_SHUTDOWN_FLUSH_PHASE: Remove. logs_empty_and_mark_files_at_shutdown()
can communicate with the normal page cleaner loop via the new function
flush_buffer_pool().
buf_flush_remove(): Assert that the calling thread is holding
buf_pool.flush_list_mutex. This removes unnecessary mutex operations
from buf_flush_remove_pages() and buf_flush_dirty_pages(),
which replace buf_LRU_flush_or_remove_pages().
buf_flush_lists(): Renamed from buf_flush_batch(), with simplified
interface. Return the number of flushed pages. Clarified comments and
renamed min_n to max_n. Identify LRU batch by lsn=0. Merge all the functions
buf_flush_start(), buf_flush_batch(), buf_flush_end() directly to this
function, which was their only caller, and remove 2 unnecessary
buf_pool.mutex release/re-acquisition that we used to perform around
the buf_flush_batch() call. At the start, if not all log has been
durably written, wait for a background task to do it, or start a new
task to do it. This allows the log write to run concurrently with our
page flushing batch. Any pages that were skipped due to too recent
FIL_PAGE_LSN or due to them being latched by a writer should be flushed
during the next batch, unless there are further modifications to those
pages. It is possible that a page that we must flush due to small
oldest_modification also carries a recent FIL_PAGE_LSN or is being
constantly modified. In the worst case, all writers would then end up
waiting in log_free_check() to allow the flushing and the checkpoint
to complete.
buf_do_flush_list_batch(): Clarify comments, and rename min_n to max_n.
Cache the last looked up tablespace. If neighbor flushing is not applicable,
invoke buf_flush_page() directly, avoiding a page lookup in between.
buf_flush_space(): Auxiliary function to look up a tablespace for
page flushing.
buf_flush_page(): Defer the computation of space->full_crc32(). Never
call log_write_up_to(), but instead skip persistent pages whose latest
modification (FIL_PAGE_LSN) is newer than the redo log. Also skip
pages on which we cannot acquire a shared latch without waiting.
buf_flush_try_neighbors(): Do not bother checking buf_fix_count
because buf_flush_page() will no longer wait for the page latch.
Take the tablespace as a parameter, and only execute this function
when innodb_flush_neighbors>0. Avoid repeated calls of page_id_t::fold().
buf_flush_relocate_on_flush_list(): Declare as cold, and push down
a condition from the callers.
buf_flush_check_neighbor(): Take id.fold() as a parameter.
buf_flush_sync(): Ensure that the buf_pool.flush_list is empty,
because the flushing batch will skip pages whose modifications have
not yet been written to the log or were latched for modification.
buf_free_from_unzip_LRU_list_batch(): Remove redundant local variables.
buf_flush_LRU_list_batch(): Let the caller buf_do_LRU_batch() initialize
the counters, and report n->evicted.
Cache the last looked up tablespace. If neighbor flushing is not applicable,
invoke buf_flush_page() directly, avoiding a page lookup in between.
buf_do_LRU_batch(): Return the number of pages flushed.
buf_LRU_free_page(): Only release and re-acquire buf_pool.mutex if
adaptive hash index entries are pointing to the block.
buf_LRU_get_free_block(): Do not wake up the page cleaner, because it
will no longer perform any useful work for us, and we do not want it
to compete for I/O while buf_flush_lists(innodb_lru_flush_size, 0)
writes out and evicts at most innodb_lru_flush_size pages. (The
function buf_do_LRU_batch() may complete after writing fewer pages if
more than innodb_lru_scan_depth pages end up in buf_pool.free list.)
Eliminate some mutex release-acquire cycles, and wait for the LRU
flush batch to complete before rescanning.
buf_LRU_check_size_of_non_data_objects(): Simplify the code.
buf_page_write_complete(): Remove the parameter evict, and always
evict pages that were part of an LRU flush.
buf_page_create(): Take a pre-allocated page as a parameter.
buf_pool_t::free_block(): Free a pre-allocated block.
recv_sys_t::recover_low(), recv_sys_t::apply(): Preallocate the block
while not holding recv_sys.mutex. During page allocation, we may
initiate a page flush, which in turn may initiate a log flush, which
would require acquiring log_sys.mutex, which should always be acquired
before recv_sys.mutex in order to avoid deadlocks. Therefore, we must
not be holding recv_sys.mutex while allocating a buffer pool block.
BtrBulk::logFreeCheck(): Skip a redundant condition.
row_undo_step(): Do not invoke srv_inc_activity_count() for every row
that is being rolled back. It should suffice to invoke the function in
trx_flush_log_if_needed() during trx_t::commit_in_memory() when the
rollback completes.
sync_check_enable(): Remove. We will enable innodb_sync_debug from the
very beginning.
Reviewed by: Vladislav Vaintroub
The debug assertion is bogus, and we had removed it in
commit b1ab211dee (MDEV-15053)
in the MariaDB Server 10.5 branch.
For a small data file, fil_space_extend_must_retry() would always
allocate a minimum size of 4*innodb_page_size.
It is possible that random read-ahead will be triggered for
a smaller file than this. In the observed case, the read-ahead
was triggered for a 6-page file that used ROW_FORMAT=COMPRESSED
with 8KiB page size. So, the desired file size was 49152 bytes,
but the actual size was 65536 bytes.
when scrubbing is enabled
buf_read_recv_pages(): Ignore the page to read if it is already
present in the freed ranges.
store_freed_or_init_rec(): Store the ranges only if scrubbing
is enabled or page compressed tablespace.
recv_init_crash_recovery_space(): Add the freed range only when
scrubbing or page compressed tablespace.
range_set::contains(): Search the value is present in ranges.
range_set::remove_if_exists(): Remove the value if exist in ranges.
mtr_t::init(): Handles the scenario that mini-transaction may allocate
a page that had just been freed.
recv_sys_t::parse(): Note down the FREE and INIT redo log irrespective
of STORE value.
Removed innodb_tablespaces_scrubbing from test case
When InnoDB is extending a data file, it is updating the FSP_SIZE
field in the first page of the data file.
In commit 8451e09073 (MDEV-11556)
we removed a work-around for this bug and made recovery stricter,
by making it track changes to FSP_SIZE via redo log records, and
extend the data files before any changes are being applied to them.
It turns out that the function fsp_fill_free_list() is not crash-safe
with respect to this when it is initializing the change buffer bitmap
page (page 1, or generally, N*innodb_page_size+1). It uses a separate
mini-transaction that is committed (and will be written to the redo
log file) before the mini-transaction that actually extended the data
file. Hence, recovery can observe a reference to a page that is
beyond the current end of the data file.
fsp_fill_free_list(): Initialize the change buffer bitmap page in
the same mini-transaction.
The rest of the changes are fixing a bug that the use of the separate
mini-transaction was attempting to work around. Namely, we must ensure
that no other thread will access the change buffer bitmap page before
our mini-transaction has been committed and all page latches have been
released.
That is, for read-ahead as well as neighbour flushing, we must avoid
accessing pages that might not yet be durably part of the tablespace.
fil_space_t::committed_size: The size of the tablespace
as persisted by mtr_commit().
fil_space_t::max_page_number_for_io(): Limit the highest page
number for I/O batches to committed_size.
MTR_MEMO_SPACE_X_LOCK: Replaces MTR_MEMO_X_LOCK for fil_space_t::latch.
mtr_x_space_lock(): Replaces mtr_x_lock() for fil_space_t::latch.
mtr_memo_slot_release_func(): When releasing MTR_MEMO_SPACE_X_LOCK,
copy space->size to space->committed_size. In this way, read-ahead
or flushing will never be invoked on pages that do not yet exist
according to FSP_SIZE.
The rw_lock_s_lock() calls for the buf_pool.page_hash became a
clear bottleneck after MDEV-15053 reduced the contention on
buf_pool.mutex. We will replace that use of rw_lock_t with a
special implementation that is optimized for memory bus traffic.
The hash_table_locks instrumentation will be removed.
buf_pool_t::page_hash: Use a special implementation whose API is
compatible with hash_table_t, and store the custom rw-locks
directly in buf_pool.page_hash.array, intentionally sharing
cache lines with the hash table pointers.
rw_lock: A low-level rw-lock implementation based on std::atomic<uint32_t>
where read_trylock() becomes a simple fetch_add(1).
buf_pool_t::page_hash_latch: The special of rw_lock for the page_hash.
buf_pool_t::page_hash_latch::read_lock(): Assert that buf_pool.mutex
is not being held by the caller.
buf_pool_t::page_hash_latch::write_lock() may be called while not holding
buf_pool.mutex. buf_pool_t::watch_set() is such a caller.
buf_pool_t::page_hash_latch::read_lock_wait(),
page_hash_latch::write_lock_wait(): The spin loops.
These will obey the global parameters innodb_sync_spin_loops and
innodb_sync_spin_wait_delay.
buf_pool_t::freed_page_hash: A singly linked list of copies of
buf_pool.page_hash that ever existed. The fact that we never
free any buf_pool.page_hash.array guarantees that all
page_hash_latch that ever existed will remain valid until shutdown.
buf_pool_t::resize_hash(): Replaces buf_pool_resize_hash().
Prepend a shallow copy of the old page_hash to freed_page_hash.
buf_pool_t::page_hash_table::n_cells: Declare as Atomic_relaxed.
buf_pool_t::page_hash_table::lock(): Explain what prevents a
race condition with buf_pool_t::resize_hash().
MDEV-15053 did not remove all unnecessary buf_pool.page_hash S-latch
acquisition. There are code paths where we are holding buf_pool.mutex
(which will sufficiently protect buf_pool.page_hash against changes)
and unnecessarily acquire the latch. Many invocations of
buf_page_hash_get_locked() can be replaced with the much simpler
buf_pool.page_hash_get_low().
In the worst case the thread that is holding buf_pool.mutex will become
a victim of MDEV-22871, suffering from a spurious reader-reader conflict
with another thread that genuinely needs to acquire a buf_pool.page_hash
S-latch.
In many places, we were also evaluating page_id_t::fold() while holding
buf_pool.mutex. Low-level functions such as buf_pool.page_hash_get_low()
must get the page_id_t::fold() as a parameter.
buf_buddy_relocate(): Defer the hash_lock acquisition to the critical
section that starts by calling buf_page_t::can_relocate().
For reads, the buf_pool.page_hash is protected by buf_pool.mutex or
by the hash_lock. There is no need to compute or acquire hash_lock
if we are not modifying the buf_pool.page_hash.
However, the buf_pool.page_hash latch must be held exclusively
when changing buf_page_t::in_file(), or if we desire to prevent
buf_page_t::can_relocate() or buf_page_t::buf_fix_count()
from changing.
rw_lock_lock_word_decr(): Add a comment that explains the polling logic.
buf_page_t::set_state(): When in_file() is to be changed, assert that
an exclusive buf_pool.page_hash latch is being held. Unfortunately
we cannot assert this for set_state(BUF_BLOCK_REMOVE_HASH) because
set_corrupt_id() may already have been called.
buf_LRU_free_page(): Check buf_page_t::can_relocate() before
aqcuiring the hash_lock.
buf_block_t::initialise(): Initialize also page.buf_fix_count().
buf_page_create(): Initialize buf_fix_count while not holding
any mutex or hash_lock. Acquire the hash_lock only for the
duration of inserting the block to the buf_pool.page_hash.
buf_LRU_old_init(), buf_LRU_add_block(),
buf_page_t::belongs_to_unzip_LRU(): Do not assert buf_page_t::in_file(),
because buf_page_create() will invoke buf_LRU_add_block()
before acquiring hash_lock and buf_page_t::set_state().
buf_pool_t::validate(): Rely on the buf_pool.mutex and do not
unnecessarily acquire any buf_pool.page_hash latches.
buf_page_init_for_read(): Clarify that we must acquire the hash_lock
upfront in order to prevent a race with buf_pool_t::watch_remove().
User-visible changes: The INFORMATION_SCHEMA views INNODB_BUFFER_PAGE
and INNODB_BUFFER_PAGE_LRU will report a dummy value FLUSH_TYPE=0
and will no longer report the PAGE_STATE value READY_FOR_USE.
We will remove some fields from buf_page_t and move much code to
member functions of buf_pool_t and buf_page_t, so that the access
rules of data members can be enforced consistently.
Evicting or adding pages in buf_pool.LRU will remain covered by
buf_pool.mutex.
Evicting or adding pages in buf_pool.page_hash will remain
covered by both buf_pool.mutex and the buf_pool.page_hash X-latch.
After this fix, buf_pool.page_hash lookups can entirely
avoid acquiring buf_pool.mutex, only relying on
buf_pool.hash_lock_get() S-latch.
Similarly, buf_flush_check_neighbors() can will rely solely on
buf_pool.mutex, no buf_pool.page_hash latch at all.
The buf_pool.mutex is rather contended in I/O heavy benchmarks,
especially when the workload does not fit in the buffer pool.
The first attempt to alleviate the contention was the
buf_pool_t::mutex split in
commit 4ed7082eef
which introduced buf_block_t::mutex, which we are now removing.
Later, multiple instances of buf_pool_t were introduced
in commit c18084f71b
and recently removed by us in
commit 1a6f708ec5 (MDEV-15058).
UNIV_BUF_DEBUG: Remove. This option to enable some buffer pool
related debugging in otherwise non-debug builds has not been used
for years. Instead, we have been using UNIV_DEBUG, which is enabled
in CMAKE_BUILD_TYPE=Debug.
buf_block_t::mutex, buf_pool_t::zip_mutex: Remove. We can mainly rely on
std::atomic and the buf_pool.page_hash latches, and in some cases
depend on buf_pool.mutex or buf_pool.flush_list_mutex just like before.
We must always release buf_block_t::lock before invoking
unfix() or io_unfix(), to prevent a glitch where a block that was
added to the buf_pool.free list would apper X-latched. See
commit c5883debd6 how this glitch
was finally caught in a debug environment.
We move some buf_pool_t::page_hash specific code from the
ha and hash modules to buf_pool, for improved readability.
buf_pool_t::close(): Assert that all blocks are clean, except
on aborted startup or crash-like shutdown.
buf_pool_t::validate(): No longer attempt to validate
n_flush[] against the number of BUF_IO_WRITE fixed blocks,
because buf_page_t::flush_type no longer exists.
buf_pool_t::watch_set(): Replaces buf_pool_watch_set().
Reduce mutex contention by separating the buf_pool.watch[]
allocation and the insert into buf_pool.page_hash.
buf_pool_t::page_hash_lock<bool exclusive>(): Acquire a
buf_pool.page_hash latch.
Replaces and extends buf_page_hash_lock_s_confirm()
and buf_page_hash_lock_x_confirm().
buf_pool_t::READ_AHEAD_PAGES: Renamed from BUF_READ_AHEAD_PAGES.
buf_pool_t::curr_size, old_size, read_ahead_area, n_pend_reads:
Use Atomic_counter.
buf_pool_t::running_out(): Replaces buf_LRU_buf_pool_running_out().
buf_pool_t::LRU_remove(): Remove a block from the LRU list
and return its predecessor. Incorporates buf_LRU_adjust_hp(),
which was removed.
buf_page_get_gen(): Remove a redundant call of fsp_is_system_temporary(),
for mode == BUF_GET_IF_IN_POOL_OR_WATCH, which is only used by
BTR_DELETE_OP (purge), which is never invoked on temporary tables.
buf_free_from_unzip_LRU_list_batch(): Avoid redundant assignments.
buf_LRU_free_from_unzip_LRU_list(): Simplify the loop condition.
buf_LRU_free_page(): Clarify the function comment.
buf_flush_check_neighbor(), buf_flush_check_neighbors():
Rewrite the construction of the page hash range. We will hold
the buf_pool.mutex for up to buf_pool.read_ahead_area (at most 64)
consecutive lookups of buf_pool.page_hash.
buf_flush_page_and_try_neighbors(): Remove.
Merge to its only callers, and remove redundant operations in
buf_flush_LRU_list_batch().
buf_read_ahead_random(), buf_read_ahead_linear(): Rewrite.
Do not acquire buf_pool.mutex, and iterate directly with page_id_t.
ut_2_power_up(): Remove. my_round_up_to_next_power() is inlined
and avoids any loops.
fil_page_get_prev(), fil_page_get_next(), fil_addr_is_null(): Remove.
buf_flush_page(): Add a fil_space_t* parameter. Minimize the
buf_pool.mutex hold time. buf_pool.n_flush[] is no longer updated
atomically with the io_fix, and we will protect most buf_block_t
fields with buf_block_t::lock. The function
buf_flush_write_block_low() is removed and merged here.
buf_page_init_for_read(): Use static linkage. Initialize the newly
allocated block and acquire the exclusive buf_block_t::lock while not
holding any mutex.
IORequest::IORequest(): Remove the body. We only need to invoke
set_punch_hole() in buf_flush_page() and nowhere else.
buf_page_t::flush_type: Remove. Replaced by IORequest::flush_type.
This field is only used during a fil_io() call.
That function already takes IORequest as a parameter, so we had
better introduce for the rarely changing field.
buf_block_t::init(): Replaces buf_page_init().
buf_page_t::init(): Replaces buf_page_init_low().
buf_block_t::initialise(): Initialise many fields, but
keep the buf_page_t::state(). Both buf_pool_t::validate() and
buf_page_optimistic_get() requires that buf_page_t::in_file()
be protected atomically with buf_page_t::in_page_hash
and buf_page_t::in_LRU_list.
buf_page_optimistic_get(): Now that buf_block_t::mutex
no longer exists, we must check buf_page_t::io_fix()
after acquiring the buf_pool.page_hash lock, to detect
whether buf_page_init_for_read() has been initiated.
We will also check the io_fix() before acquiring hash_lock
in order to avoid unnecessary computation.
The field buf_block_t::modify_clock (protected by buf_block_t::lock)
allows buf_page_optimistic_get() to validate the block.
buf_page_t::real_size: Remove. It was only used while flushing
pages of page_compressed tables.
buf_page_encrypt(): Add an output parameter that allows us ot eliminate
buf_page_t::real_size. Replace a condition with debug assertion.
buf_page_should_punch_hole(): Remove.
buf_dblwr_t::add_to_batch(): Replaces buf_dblwr_add_to_batch().
Add the parameter size (to replace buf_page_t::real_size).
buf_dblwr_t::write_single_page(): Replaces buf_dblwr_write_single_page().
Add the parameter size (to replace buf_page_t::real_size).
fil_system_t::detach(): Replaces fil_space_detach().
Ensure that fil_validate() will not be violated even if
fil_system.mutex is released and reacquired.
fil_node_t::complete_io(): Renamed from fil_node_complete_io().
fil_node_t::close_to_free(): Replaces fil_node_close_to_free().
Avoid invoking fil_node_t::close() because fil_system.n_open
has already been decremented in fil_space_t::detach().
BUF_BLOCK_READY_FOR_USE: Remove. Directly use BUF_BLOCK_MEMORY.
BUF_BLOCK_ZIP_DIRTY: Remove. Directly use BUF_BLOCK_ZIP_PAGE,
and distinguish dirty pages by buf_page_t::oldest_modification().
BUF_BLOCK_POOL_WATCH: Remove. Use BUF_BLOCK_NOT_USED instead.
This state was only being used for buf_page_t that are in
buf_pool.watch.
buf_pool_t::watch[]: Remove pointer indirection.
buf_page_t::in_flush_list: Remove. It was set if and only if
buf_page_t::oldest_modification() is nonzero.
buf_page_decrypt_after_read(), buf_corrupt_page_release(),
buf_page_check_corrupt(): Change the const fil_space_t* parameter
to const fil_node_t& so that we can report the correct file name.
buf_page_monitor(): Declare as an ATTRIBUTE_COLD global function.
buf_page_io_complete(): Split to buf_page_read_complete() and
buf_page_write_complete().
buf_dblwr_t::in_use: Remove.
buf_dblwr_t::buf_block_array: Add IORequest::flush_t.
buf_dblwr_sync_datafiles(): Remove. It was a useless wrapper of
os_aio_wait_until_no_pending_writes().
buf_flush_write_complete(): Declare static, not global.
Add the parameter IORequest::flush_t.
buf_flush_freed_page(): Simplify the code.
recv_sys_t::flush_lru: Renamed from flush_type and changed to bool.
fil_read(), fil_write(): Replaced with direct use of fil_io().
fil_buffering_disabled(): Remove. Check srv_file_flush_method directly.
fil_mutex_enter_and_prepare_for_io(): Return the resolved
fil_space_t* to avoid a duplicated lookup in the caller.
fil_report_invalid_page_access(): Clean up the parameters.
fil_io(): Return fil_io_t, which comprises fil_node_t and error code.
Always invoke fil_space_t::acquire_for_io() and let either the
sync=true caller or fil_aio_callback() invoke
fil_space_t::release_for_io().
fil_aio_callback(): Rewrite to replace buf_page_io_complete().
fil_check_pending_operations(): Remove a parameter, and remove some
redundant lookups.
fil_node_close_to_free(): Wait for n_pending==0. Because we no longer
do an extra lookup of the tablespace between fil_io() and the
completion of the operation, we must give fil_node_t::complete_io() a
chance to decrement the counter.
fil_close_tablespace(): Remove unused parameter trx, and document
that this is only invoked during the error handling of IMPORT TABLESPACE.
row_import_discard_changes(): Merged with the only caller,
row_import_cleanup(). Do not lock up the data dictionary while
invoking fil_close_tablespace().
logs_empty_and_mark_files_at_shutdown(): Do not invoke
fil_close_all_files(), to avoid a !needs_flush assertion failure
on fil_node_t::close().
innodb_shutdown(): Invoke os_aio_free() before fil_close_all_files().
fil_close_all_files(): Invoke fil_flush_file_spaces()
to ensure proper durability.
thread_pool::unbind(): Fix a crash that would occur on Windows
after srv_thread_pool->disable_aio() and os_file_close().
This fix was submitted by Vladislav Vaintroub.
Thanks to Matthias Leich and Axel Schwenke for extensive testing,
Vladislav Vaintroub for helpful comments, and Eugene Kosov for a review.
Thanks to MDEV-15058, there is only one InnoDB buffer pool.
Allocating buf_pool statically removes one level of pointer indirection
and makes code more readable, and removes the awkward initialization of
some buf_pool members.
While doing this, we will also declare some buf_pool_t data members
private and replace some functions with member functions. This is
mostly affecting buffer pool resizing.
This is not aiming to be a complete rewrite of buf_pool_t to
a proper class. Most of the buffer pool interface, such as
buf_page_get_gen(), will remain in the C programming style
for now.
buf_pool_t::withdrawing: Replaces buf_pool_withdrawing.
buf_pool_t::withdraw_clock_: Replaces buf_withdraw_clock.
buf_pool_t::create(): Repalces buf_pool_init().
buf_pool_t::close(): Replaces buf_pool_free().
buf_bool_t::will_be_withdrawn(): Replaces buf_block_will_be_withdrawn(),
buf_frame_will_be_withdrawn().
buf_pool_t::clear_hash_index(): Replaces buf_pool_clear_hash_index().
buf_pool_t::get_n_pages(): Replaces buf_pool_get_n_pages().
buf_pool_t::validate(): Replaces buf_validate().
buf_pool_t::print(): Replaces buf_print().
buf_pool_t::block_from_ahi(): Replaces buf_block_from_ahi().
buf_pool_t::is_block_field(): Replaces buf_pointer_is_block_field().
buf_pool_t::is_block_mutex(): Replaces buf_pool_is_block_mutex().
buf_pool_t::is_block_lock(): Replaces buf_pool_is_block_lock().
buf_pool_t::is_obsolete(): Replaces buf_pool_is_obsolete().
buf_pool_t::io_buf: Make default-constructible.
buf_pool_t::io_buf::create(): Delayed 'constructor'
buf_pool_t::io_buf::close(): Early 'destructor'
HazardPointer: Make default-constructible. Define all member functions
inline, also for derived classes.
- This issue is caused by MDEV-19176
(bba59abb03).
- Problem is that there is miscalculation of available memory during
recovery if innodb_buffer_pool_instances > 1.
- Ignore the buffer pool instance while calculating available_memory
- Removed recv_n_pool_free_frames variable and use buf_pool_get_n_pages()
instead.
Our benchmarking efforts indicate that the reasons for splitting the
buf_pool in commit c18084f71b
have mostly gone away, possibly as a result of
mysql/mysql-server@ce6109ebfd
or similar work.
Only in one write-heavy benchmark where the working set size is
ten times the buffer pool size, the buf_pool->mutex would be
less contended with 4 buffer pool instances than with 1 instance,
in buf_page_io_complete(). That contention could be alleviated
further by making more use of std::atomic and by splitting
buf_pool_t::mutex further (MDEV-15053).
We will deprecate and ignore the following parameters:
innodb_buffer_pool_instances
innodb_page_cleaners
There will be only one buffer pool and one page cleaner task.
In a number of INFORMATION_SCHEMA views, columns that indicated
the buffer pool instance will be removed:
information_schema.innodb_buffer_page.pool_id
information_schema.innodb_buffer_page_lru.pool_id
information_schema.innodb_buffer_pool_stats.pool_id
information_schema.innodb_cmpmem.buffer_pool_instance
information_schema.innodb_cmpmem_reset.buffer_pool_instance
InnoDB crash recovery used a special type of mem_heap_t that
allocates backing store from the buffer pool. That incurred
a significant overhead, leading to underutilization of memory,
and limiting the maximum contiguous allocated size of a log record.
recv_sys_t::blocks: A linked list of buf_block_t that are allocated
by buf_block_alloc() for redo log records. Replaces recv_sys_t::heap.
We repurpose buf_block_t::unzip_LRU for linking the elements.
recv_sys_t::max_log_blocks: Renamed from recv_n_pool_free_frames.
recv_sys_t::max_blocks(): Accessor for max_log_blocks.
recv_sys_t::alloc(): Allocate memory from the current recv_sys_t::blocks
element, or allocate another block. In debug builds, various free()
member functions must be invoked, because we repurpose
buf_page_t::buf_fix_count for tracking allocations.
recv_sys_t::free_corrupted_page(): Renamed from recv_recover_corrupt_page()
recv_sys_t::is_memory_exhausted(): Renamed from recv_sys_heap_check()
recv_sys_t::pages and its elements are allocated directly by the
system memory allocator.
recv_parse_log_recs(): Remove the parameter available_memory.
We rename some variables 'store_to_hash' to 'store', because
recv_sys.pages is not actually a hash table.
This is joint work with Thirunarayanan Balathandayuthapani.
