- Don't apply redo log for the corrupted page when innodb_force_recovery > 0.
- Allow the table to be dropped when index root page is
corrupted when innodb_force_recovery > 0.
log_checkpoint(), log_make_checkpoint_at(): Remove the parameter
write_always. It seems that the primary purpose of this parameter
was to ensure in the function recv_reset_logs() that both checkpoint
header pages will be overwritten, when the function is called from
the never-enabled function recv_recovery_from_archive_start().
create_log_files(): Merge recv_reset_logs() to its only caller.
Debug instrumentation: Prefer to flush the redo log, instead of
triggering a redo log checkpoint.
page_header_set_field(): Disable a debug assertion that will
always fail due to MDEV-19344, now that we no longer initiate
a redo log checkpoint before an injected crash.
In recv_reset_logs() there used to be two calls to
log_make_checkpoint_at(). The apparent purpose of this was
to ensure that both InnoDB redo log checkpoint header pages
will be initialized or overwritten.
The second call was removed (without any explanation) in MySQL 5.6.3:
mysql/mysql-server@4ca37968da
In MySQL 5.6.8 WL#6494, starting with
mysql/mysql-server@00a0ba8ad9
the function recv_reset_logs() was not only invoked during
InnoDB data file initialization, but also during a regular
startup when the redo log is being resized.
mysql/mysql-server@45e9167983
in MySQL 5.7.2 removed the UNIV_LOG_ARCHIVE code, but still
did not remove the parameter write_always.
The recv_sys data structures are accessed not only from the thread
that executes InnoDB plugin initialization, but also from the
InnoDB I/O threads, which can invoke recv_recover_page().
Assert that sufficient concurrency control is in place.
Some code was accessing recv_sys data structures without
holding recv_sys->mutex.
recv_recover_page(bpage): Refactor the call from buf_page_io_complete()
into a separate function that performs necessary steps. The
main thread was unnecessarily releasing and reacquiring recv_sys->mutex.
recv_recover_page(block,mtr,recv_addr): Pass more parameters from
the caller. Avoid redundant lookups and computations. Eliminate some
redundant variables.
recv_get_fil_addr_struct(): Assert that recv_sys->mutex is being held.
That was not always the case!
recv_scan_log_recs(): Acquire recv_sys->mutex for the whole duration
of the function. (While we are scanning and buffering redo log records,
no pages can be read in.)
recv_read_in_area(): Properly protect access with recv_sys->mutex.
recv_apply_hashed_log_recs(): Check recv_addr->state only once,
and continuously hold recv_sys->mutex. The mutex will be released
and reacquired inside recv_recover_page() and recv_read_in_area(),
allowing concurrent processing by buf_page_io_complete() in I/O threads.
Normally, InnoDB is not in the process of executing crash recovery.
Provide a hint to the compiler that the recovery-related code paths
are rarely executed.
Implement undo tablespace truncation via normal redo logging.
Implement TRUNCATE TABLE as a combination of RENAME to #sql-ib name,
CREATE, and DROP.
Note: Orphan #sql-ib*.ibd may be left behind if MariaDB Server 10.2
is killed before the DROP operation is committed. If MariaDB Server 10.2
is killed during TRUNCATE, it is also possible that the old table
was renamed to #sql-ib*.ibd but the data dictionary will refer to the
table using the original name.
In MariaDB Server 10.3, RENAME inside InnoDB is transactional,
and #sql-* tables will be dropped on startup. So, this new TRUNCATE
will be fully crash-safe in 10.3.
ha_mroonga::wrapper_truncate(): Pass table options to the underlying
storage engine, now that ha_innobase::truncate() will need them.
rpl_slave_state::truncate_state_table(): Before truncating
mysql.gtid_slave_pos, evict any cached table handles from
the table definition cache, so that there will be no stale
references to the old table after truncating.
== TRUNCATE TABLE ==
WL#6501 in MySQL 5.7 introduced separate log files for implementing
atomic and crash-safe TRUNCATE TABLE, instead of using the InnoDB
undo and redo log. Some convoluted logic was added to the InnoDB
crash recovery, and some extra synchronization (including a redo log
checkpoint) was introduced to make this work. This synchronization
has caused performance problems and race conditions, and the extra
log files cannot be copied or applied by external backup programs.
In order to support crash-upgrade from MariaDB 10.2, we will keep
the logic for parsing and applying the extra log files, but we will
no longer generate those files in TRUNCATE TABLE.
A prerequisite for crash-safe TRUNCATE is a crash-safe RENAME TABLE
(with full redo and undo logging and proper rollback). This will
be implemented in MDEV-14717.
ha_innobase::truncate(): Invoke RENAME, create(), delete_table().
Because RENAME cannot be fully rolled back before MariaDB 10.3
due to missing undo logging, add some explicit rename-back in
case the operation fails.
ha_innobase::delete(): Introduce a variant that takes sqlcom as
a parameter. In TRUNCATE TABLE, we do not want to touch any
FOREIGN KEY constraints.
ha_innobase::create(): Add the parameters file_per_table, trx.
In TRUNCATE, the new table must be created in the same transaction
that renames the old table.
create_table_info_t::create_table_info_t(): Add the parameters
file_per_table, trx.
row_drop_table_for_mysql(): Replace a bool parameter with sqlcom.
row_drop_table_after_create_fail(): New function, wrapping
row_drop_table_for_mysql().
dict_truncate_index_tree_in_mem(), fil_truncate_tablespace(),
fil_prepare_for_truncate(), fil_reinit_space_header_for_table(),
row_truncate_table_for_mysql(), TruncateLogger,
row_truncate_prepare(), row_truncate_rollback(),
row_truncate_complete(), row_truncate_fts(),
row_truncate_update_system_tables(),
row_truncate_foreign_key_checks(), row_truncate_sanity_checks():
Remove.
row_upd_check_references_constraints(): Remove a check for
TRUNCATE, now that the table is no longer truncated in place.
The new test innodb.truncate_foreign uses DEBUG_SYNC to cover some
race-condition like scenarios. The test innodb-innodb.truncate does
not use any synchronization.
We add a redo log subformat to indicate backup-friendly format.
MariaDB 10.4 will remove support for the old TRUNCATE logging,
so crash-upgrade from old 10.2 or 10.3 to 10.4 will involve
limitations.
== Undo tablespace truncation ==
MySQL 5.7 implements undo tablespace truncation. It is only
possible when innodb_undo_tablespaces is set to at least 2.
The logging is implemented similar to the WL#6501 TRUNCATE,
that is, using separate log files and a redo log checkpoint.
We can simply implement undo tablespace truncation within
a single mini-transaction that reinitializes the undo log
tablespace file. Unfortunately, due to the redo log format
of some operations, currently, the total redo log written by
undo tablespace truncation will be more than the combined size
of the truncated undo tablespace. It should be acceptable
to have a little more than 1 megabyte of log in a single
mini-transaction. This will be fixed in MDEV-17138 in
MariaDB Server 10.4.
recv_sys_t: Add truncated_undo_spaces[] to remember for which undo
tablespaces a MLOG_FILE_CREATE2 record was seen.
namespace undo: Remove some unnecessary declarations.
fil_space_t::is_being_truncated: Document that this flag now
only applies to undo tablespaces. Remove some references.
fil_space_t::is_stopping(): Do not refer to is_being_truncated.
This check is for tablespaces of tables. Potentially used
tablespaces are never truncated any more.
buf_dblwr_process(): Suppress the out-of-bounds warning
for undo tablespaces.
fil_truncate_log(): Write a MLOG_FILE_CREATE2 with a nonzero
page number (new size of the tablespace in pages) to inform
crash recovery that the undo tablespace size has been reduced.
fil_op_write_log(): Relax assertions, so that MLOG_FILE_CREATE2
can be written for undo tablespaces (without .ibd file suffix)
for a nonzero page number.
os_file_truncate(): Add the parameter allow_shrink=false
so that undo tablespaces can actually be shrunk using this function.
fil_name_parse(): For undo tablespace truncation,
buffer MLOG_FILE_CREATE2 in truncated_undo_spaces[].
recv_read_in_area(): Avoid reading pages for which no redo log
records remain buffered, after recv_addr_trim() removed them.
trx_rseg_header_create(): Add a FIXME comment that we could write
much less redo log.
trx_undo_truncate_tablespace(): Reinitialize the undo tablespace
in a single mini-transaction, which will be flushed to the redo log
before the file size is trimmed.
recv_addr_trim(): Discard any redo logs for pages that were
logged after the new end of a file, before the truncation LSN.
If the rec_list becomes empty, reduce n_addrs. After removing
any affected records, actually truncate the file.
recv_apply_hashed_log_recs(): Invoke recv_addr_trim() right before
applying any log records. The undo tablespace files must be open
at this point.
buf_flush_or_remove_pages(), buf_flush_dirty_pages(),
buf_LRU_flush_or_remove_pages(): Add a parameter for specifying
the number of the first page to flush or remove (default 0).
trx_purge_initiate_truncate(): Remove the log checkpoints, the
extra logging, and some unnecessary crash points. Merge the code
from trx_undo_truncate_tablespace(). First, flush all to-be-discarded
pages (beyond the new end of the file), then trim the space->size
to make the page allocation deterministic. At the only remaining
crash injection point, flush the redo log, so that the recovery
can be tested.
The MySQL 5.7 TRUNCATE TABLE is inherently incompatible
with hot backup, because it is creating and deleting a separate
log file, and it is not writing redo log for all changes of the
InnoDB data dictionary tables. Refuse to create a corrupted backup
if the unsafe form of TRUNCATE was executed.
Note: Undo log tablespace truncation cannot be detected easily.
Also it is incompatible with backup, for similar reasons.
xtrabackup_backup_func(): "Subscribe to" the log events before
the first invocation of xtrabackup_copy_logfile().
recv_parse_or_apply_log_rec_body(): If the function pointer
log_truncate is set, invoke it to report MLOG_TRUNCATE.
Problem:
=======
During validation of missing tablespace, missing tablespace id is
being compared with hash table of redo logs (recv_sys->addr_hash). But if the
hash table ran out of memory then there is a possibility that it will not contain
the redo logs of all tablespace. In that case, Server will load the InnoDB
even though there is a missing tablespace.
Solution:
========
If the recv_sys->addr_hash hash table ran out of memory then InnoDB needs
to scan the remaining redo log again to validate the missing tablespace.
Problem:
=======
Mariabackup exits during prepare phase if it encounters
MLOG_INDEX_LOAD redo log record. MLOG_INDEX_LOAD record
informs Mariabackup that the backup cannot be completed based
on the redo log scan, because some information is purposely
omitted due to bulk index creation in ALTER TABLE.
Solution:
========
Detect the MLOG_INDEX_LOAD redo record during backup phase and
exit the mariabackup with the proper error message.
buf_flush_page_cleaner_coordinator: In the first loop, use an
appropriate termination condition, waiting for !recv_writer_thread_active.
logs_empty_and_mark_files_at_shutdown(): Signal recv_sys->flush_start
in case the recv_writer_thread was never started, or
buf_flush_page_cleaner_coordinator failed to notice its termination.
innobase_start_or_create_for_mysql(): Remove a redundant, unreachable
condition, and properly release resources when aborting startup due to
recv_sys->found_corrupt_log.
InnoDB I/O and buffer pool interfaces and the redo log format
have been changed between MariaDB 10.1 and 10.2, and the backup
code has to be adjusted accordingly.
The code has been simplified, and many memory leaks have been fixed.
Instead of the file name xtrabackup_logfile, the file name ib_logfile0
is being used for the copy of the redo log. Unnecessary InnoDB startup and
shutdown and some unnecessary threads have been removed.
Some help was provided by Vladislav Vaintroub.
Parameters have been cleaned up and aligned with those of MariaDB 10.2.
The --dbug option has been added, so that in debug builds,
--dbug=d,ib_log can be specified to enable diagnostic messages
for processing redo log entries.
By default, innodb_doublewrite=OFF, so that --prepare works faster.
If more crash-safety for --prepare is needed, double buffering
can be enabled.
The parameter innodb_log_checksums=OFF can be used to ignore redo log
checksums in --backup.
Some messages have been cleaned up.
Unless --export is specified, Mariabackup will not deal with undo log.
The InnoDB mini-transaction redo log is not only about user-level
transactions; it is actually about mini-transactions. To avoid confusion,
call it the redo log, not transaction log.
We disable any undo log processing in --prepare.
Because MariaDB 10.2 supports indexed virtual columns, the
undo log processing would need to be able to evaluate virtual column
expressions. To reduce the amount of code dependencies, we will not
process any undo log in prepare.
This means that the --export option must be disabled for now.
This also means that the following options are redundant
and have been removed:
xtrabackup --apply-log-only
innobackupex --redo-only
In addition to disabling any undo log processing, we will disable any
further changes to data pages during --prepare, including the change
buffer merge. This means that restoring incremental backups should
reliably work even when change buffering is being used on the server.
Because of this, preparing a backup will not generate any further
redo log, and the redo log file can be safely deleted. (If the
--export option is enabled in the future, it must generate redo log
when processing undo logs and buffered changes.)
In --prepare, we cannot easily know if a partial backup was used,
especially when restoring a series of incremental backups. So, we
simply warn about any missing files, and ignore the redo log for them.
FIXME: Enable the --export option.
FIXME: Improve the handling of the MLOG_INDEX_LOAD record, and write
a test that initiates a backup while an ALGORITHM=INPLACE operation
is creating indexes or rebuilding a table. An error should be detected
when preparing the backup.
FIXME: In --incremental --prepare, xtrabackup_apply_delta() should
ensure that if FSP_SIZE is modified, the file size will be adjusted
accordingly.
recv_sys_init(): Remove the parameter.
recv_sys_create(): Merge to recv_sys_init().
recv_sys_mem_free(): Merge to recv_sys_close().
log_mem_free(): Merge to log_shutdown().
InnoDB never supported more than one copy of a redo log.
There were provisions to do that. For Mariabackup, let us clean up
this code.
log_sys_init(): Renamed from log_init().
log_set_capacity(): Renamed from log_calc_max_ages().
log_init(): Renamed from log_group_init(). Remove the parameters
id, space_id. Let the caller invoke log_set_capacity() when needed.
log_group_t: Remove id, space_id, log_groups.
log_t: Replace log_groups with a single log.
recv_find_max_checkpoint(): Declare globally. Remove the first parameter.
xtrabackup_choose_lsn_offset(): Remove (dead code).
Problem was that FIL_PAGE_FLUSH_LSN_OR_KEY_VERSION field that for
encrypted pages even in system datafiles should contain key_version
except very first page (0:0) is after encryption overwritten with
flush lsn.
Ported WL#7990 Repurpose FIL_PAGE_FLUSH_LSN to 10.1
The field FIL_PAGE_FLUSH_LSN_OR_KEY_VERSION is consulted during
InnoDB startup.
At startup, InnoDB reads the FIL_PAGE_FLUSH_LSN_OR_KEY_VERSION
from the first page of each file in the InnoDB system tablespace.
If there are multiple files, the minimum and maximum LSN can differ.
These numbers are passed to InnoDB startup.
Having the number in other files than the first file of the InnoDB
system tablespace is not providing much additional value. It is
conflicting with other use of the field, such as on InnoDB R-tree
index pages and encryption key_version.
This worklog will stop writing FIL_PAGE_FLUSH_LSN_OR_KEY_VERSION to
other files than the first file of the InnoDB system tablespace
(page number 0:0) when system tablespace is encrypted. If tablespace
is not encrypted we continue writing FIL_PAGE_FLUSH_LSN_OR_KEY_VERSION
to all first pages of system tablespace to avoid unnecessary
warnings on downgrade.
open_or_create_data_files(): pass only one flushed_lsn parameter
xb_load_tablespaces(): pass only one flushed_lsn parameter.
buf_page_create(): Improve comment about where
FIL_PAGE_FIL_FLUSH_LSN_OR_KEY_VERSION is set.
fil_write_flushed_lsn(): A new function, merged from
fil_write_lsn_and_arch_no_to_file() and
fil_write_flushed_lsn_to_data_files().
Only write to the first page of the system tablespace (page 0:0)
if tablespace is encrypted, or write all first pages of system
tablespace and invoke fil_flush_file_spaces(FIL_TYPE_TABLESPACE)
afterwards.
fil_read_first_page(): read flush_lsn and crypt_data only from
first datafile.
fil_open_single_table_tablespace(): Remove output of LSN, because it
was only valid for the system tablespace and the undo tablespaces, not
user tablespaces.
fil_validate_single_table_tablespace(): Remove output of LSN.
checkpoint_now_set(): Use fil_write_flushed_lsn and output
a error if operation fails.
Remove lsn variable from fsp_open_info.
recv_recovery_from_checkpoint_start(): Remove unnecessary second
flush_lsn parameter.
log_empty_and_mark_files_at_shutdown(): Use fil_writte_flushed_lsn
and output error if it fails.
open_or_create_data_files(): Pass only one flushed_lsn variable.
Also, implement MDEV-11027 a little differently from 5.5 and 10.0:
recv_apply_hashed_log_recs(): Change the return type back to void
(DB_SUCCESS was always returned).
Report progress also via systemd using sd_notifyf().
Provide more useful progress reporting of crash recovery.
recv_sys_t::progress_time: The time of the last report.
recv_sys_t::report(ib_time_t): Determine whether progress should
be reported.
recv_scan_print_counter: Remove.
log_group_read_log_seg(): After after each I/O request, invoke
recv_sys_t::report() and report progress if needed.
recv_apply_hashed_log_recs(): Change the return type back to void
(DB_SUCCESS was always returned), and rename the parameter to last_batch.
At the start of each batch, if there are pages to be recovered,
issue a message.
Also, implement MDEV-11027 a little differently from 5.5:
recv_sys_t::report(ib_time_t): Determine whether progress should
be reported.
recv_apply_hashed_log_recs(): Rename the parameter to last_batch.
Provide more useful progress reporting of crash recovery.
recv_sys_t::progress_time: The time of the last report.
recv_scan_print_counter: Remove.
log_group_read_log_seg(): After after each I/O request,
report progress if needed.
recv_apply_hashed_log_recs(): At the start of each batch,
if there are pages to be recovered, issue a message.
Write only one encryption key to the checkpoint page.
Use 4 bytes of nonce. Encrypt more of each redo log block,
only skipping the 4-byte field LOG_BLOCK_HDR_NO which the
initialization vector is derived from.
Issue notes, not warning messages for rewriting the redo log files.
recv_recovery_from_checkpoint_finish(): Do not generate any redo log,
because we must avoid that before rewriting the redo log files, or
otherwise a crash during a redo log rewrite (removing or adding
encryption) may end up making the database unrecoverable.
Instead, do these tasks in innobase_start_or_create_for_mysql().
Issue a firm "Missing MLOG_CHECKPOINT" error message. Remove some
unreachable code and duplicated error messages for log corruption.
LOG_HEADER_FORMAT_ENCRYPTED: A flag for identifying an encrypted redo
log format.
log_group_t::is_encrypted(), log_t::is_encrypted(): Determine
if the redo log is in encrypted format.
recv_find_max_checkpoint(): Interpret LOG_HEADER_FORMAT_ENCRYPTED.
srv_prepare_to_delete_redo_log_files(): Display NOTE messages about
adding or removing encryption. Do not issue warnings for redo log
resizing any more.
innobase_start_or_create_for_mysql(): Rebuild the redo logs also when
the encryption changes.
innodb_log_checksums_func_update(): Always use the CRC-32C checksum
if innodb_encrypt_log. If needed, issue a warning
that innodb_encrypt_log implies innodb_log_checksums.
log_group_write_buf(): Compute the checksum on the encrypted
block contents, so that transmission errors or incomplete blocks can be
detected without decrypting.
Rewrite most of the redo log encryption code. Only remember one
encryption key at a time (but remember up to 5 when upgrading from the
MariaDB 10.1 format.)
recv_writer_thread(): Do not assign recv_writer_thread_active=true
in order to avoid a race condition with
recv_recovery_from_checkpoint_finish().
recv_init_crash_recovery_spaces(): Assign recv_writer_thread_active=true
before creating recv_writer_thread.
Most notably, this includes MDEV-11623, which includes a fix and
an upgrade procedure for the InnoDB file format incompatibility
that is present in MariaDB Server 10.1.0 through 10.1.20.
In other words, this merge should address
MDEV-11202 InnoDB 10.1 -> 10.2 migration does not work
MariaDB will likely never support MySQL-style encryption for
InnoDB, because we cannot link with the Oracle encryption plugin.
This is preparation for merging MDEV-11623.
The InnoDB source code contains quite a few references to a closed-source
hot backup tool which was originally called InnoDB Hot Backup (ibbackup)
and later incorporated in MySQL Enterprise Backup.
The open source backup tool XtraBackup uses the full database for recovery.
So, the references to UNIV_HOTBACKUP are only cluttering the source code.
Contains also:
MDEV-10549 mysqld: sql/handler.cc:2692: int handler::ha_index_first(uchar*): Assertion `table_share->tmp_table != NO_TMP_TABLE || m_lock_type != 2' failed. (branch bb-10.2-jan)
Unlike MySQL, InnoDB still uses THR_LOCK in MariaDB
MDEV-10548 Some of the debug sync waits do not work with InnoDB 5.7 (branch bb-10.2-jan)
enable tests that were fixed in MDEV-10549
MDEV-10548 Some of the debug sync waits do not work with InnoDB 5.7 (branch bb-10.2-jan)
fix main.innodb_mysql_sync - re-enable online alter for partitioned innodb tables
Contains also
MDEV-10547: Test multi_update_innodb fails with InnoDB 5.7
The failure happened because 5.7 has changed the signature of
the bool handler::primary_key_is_clustered() const
virtual function ("const" was added). InnoDB was using the old
signature which caused the function not to be used.
MDEV-10550: Parallel replication lock waits/deadlock handling does not work with InnoDB 5.7
Fixed mutexing problem on lock_trx_handle_wait. Note that
rpl_parallel and rpl_optimistic_parallel tests still
fail.
MDEV-10156 : Group commit tests fail on 10.2 InnoDB (branch bb-10.2-jan)
Reason: incorrect merge
MDEV-10550: Parallel replication can't sync with master in InnoDB 5.7 (branch bb-10.2-jan)
Reason: incorrect merge
Analysis:
-- InnoDB has n (>0) redo-log files.
-- In the first page of redo-log there is 2 checkpoint records on fixed location (checkpoint is not encrypted)
-- On every checkpoint record there is up to 5 crypt_keys containing the keys used for encryption/decryption
-- On crash recovery we read all checkpoints on every file
-- Recovery starts by reading from the latest checkpoint forward
-- Problem is that latest checkpoint might not always contain the key we need to decrypt all the
redo-log blocks (see MDEV-9422 for one example)
-- Furthermore, there is no way to identify is the log block corrupted or encrypted
For example checkpoint can contain following keys :
write chk: 4 [ chk key ]: [ 5 1 ] [ 4 1 ] [ 3 1 ] [ 2 1 ] [ 1 1 ]
so over time we could have a checkpoint
write chk: 13 [ chk key ]: [ 14 1 ] [ 13 1 ] [ 12 1 ] [ 11 1 ] [ 10 1 ]
killall -9 mysqld causes crash recovery and on crash recovery we read as
many checkpoints as there is log files, e.g.
read [ chk key ]: [ 13 1 ] [ 12 1 ] [ 11 1 ] [ 10 1 ] [ 9 1 ]
read [ chk key ]: [ 14 1 ] [ 13 1 ] [ 12 1 ] [ 11 1 ] [ 10 1 ] [ 9 1 ]
This is problematic, as we could still scan log blocks e.g. from checkpoint 4 and we do
not know anymore the correct key.
CRYPT INFO: for checkpoint 14 search 4
CRYPT INFO: for checkpoint 13 search 4
CRYPT INFO: for checkpoint 12 search 4
CRYPT INFO: for checkpoint 11 search 4
CRYPT INFO: for checkpoint 10 search 4
CRYPT INFO: for checkpoint 9 search 4 (NOTE: NOT FOUND)
For every checkpoint, code generated a new encrypted key based on key
from encryption plugin and random numbers. Only random numbers are
stored on checkpoint.
Fix: Generate only one key for every log file. If checkpoint contains only
one key, use that key to encrypt/decrypt all log blocks. If checkpoint
contains more than one key (this is case for databases created
using MariaDB server version 10.1.0 - 10.1.12 if log encryption was
used). If looked checkpoint_no is found from keys on checkpoint we use
that key to decrypt the log block. For encryption we use always the
first key. If the looked checkpoint_no is not found from keys on checkpoint
we use the first key.
Modified code also so that if log is not encrypted, we do not generate
any empty keys. If we have a log block and no keys is found from
checkpoint we assume that log block is unencrypted. Log corruption or
missing keys is found by comparing log block checksums. If we have
a keys but current log block checksum is correct we again assume
log block to be unencrypted. This is because current implementation
stores checksum only before encryption and new checksum after
encryption but before disk write is not stored anywhere.
