Dump thread may encounter an error when reading events from the active binlog
file. However the errors may be temporary, so dump thread will try to read
the event again. But dump thread seeked to an wrong position, it caused some
events was sent twice.
To fix the bug, prev_pos is defined out the while loop and is set the correct
position after reading every event correctly.
This patch also make binlog_can_be_corrupted more accurate, only the binlogs
not closed normally are marked binlog_can_be_corrupted.
Finally, two warnings are added when dump threads encounter the temporary
errors.
DO WHAT YOU EXPECT"
Fix info:
--------
Backport of the deprecation bug fix (WL#5265) for global variable
'THREAD_CONCURRENCY' from mysql-5.6 to mysql-5.5
Note: With this backport, certain additional deprecation warnings
would be reported under error conditions while setting the
global/session variables.
CONTAINING NULL
Problem:-
In MySQL, We can obtain the number of distinct expression
combinations that do not contain NULL by giving a list of
expressions in COUNT(DISTINCT).
However rows with NULL values are
incorrectly included in the count when loose index scan is
used.
Analysis:-
In case of loose index scan, we check whether the field is null or
not and increase the count in Item_sum_count::add().
But there we are checking for the first field in COUNT(DISTINCT),
not for every field. This is causing an incorrect result.
Solution:-
Check all field in Item_sum_count::add(), whether there values
are null or not. Then only increment the count.
******
Bug#17222452 - SELECT COUNT(DISTINCT A,B) INCORRECTLY COUNTS ROWS
CONTAINING NULL
Problem:-
In MySQL, We can obtain the number of distinct expression
combinations that do not contain NULL by giving a list of
expressions in COUNT(DISTINCT).
However rows with NULL values are
incorrectly included in the count when loose index scan is
used.
Analysis:-
In case of loose index scan, we check whether the field is null or
not and increase the count in Item_sum_count::add().
But there we are checking for the first field in COUNT(DISTINCT),
not for every field. This is causing an incorrect result.
Solution:-
Check all field in Item_sum_count::add(), whether there values
are null or not. Then only increment the count.
SPECIFIED WITH THE BASEDIR OPTION
Description: The mysql_plugin client attempts to remove any
filename specified to the --basedir option. The problem is
that if the filename does not end with a slash, it will
attempt to unlink it, which succeeds for files, but not for
directories.
Analysis: When we are starting mysql_plugin with basedir
option and if we are giving path of a file as basedir, it
deletes that file. It was because it uses a function
my_delete which unlinks the file path given.
Fix: As a fix we replace that line using another function
my_free, which will only free the pointer which is having
that file path.
Memory Leak in mysql_options() was caused by missing call
to my_free() in MYSQL_SET_CLIENT_IP branch. Fixed by adding
my_free() to cleanup mysql->options.client_ip value before
assigning new value.
Memory Leak in mysql_options() was caused by missing call
to my_free() in MYSQL_SET_CLIENT_IP branch. Fixed by adding
my_free() to cleanup mysql->options.client_ip value before
assigning new value.
ERROR HANDLING CODE
BACKGROUND:
There can be a potential crash due to buffer overrun in
SSL error handling code due to missing comma in
ssl_error_string[] array in viosslfactories.c.
ANALYSIS:
Found by code Inspection.
FIX:
Added the missing comma in SSL error handling code
in ssl_error_string[] array in viosslfactories.c.
ERROR HANDLING CODE
BACKGROUND:
There can be a potential crash due to buffer overrun in
SSL error handling code due to missing comma in
ssl_error_string[] array in viosslfactories.c.
ANALYSIS:
Found by code Inspection.
FIX:
Added the missing comma in SSL error handling code
in ssl_error_string[] array in viosslfactories.c.
Problem:-
Second execution of prepared statement for query with
parameter in limit clause, causes an assert when using
connectors (e.g., Connector C).
Analysis:-
In prepared statement, LIMIT parameters can be
specified using '?' markers. Value for the parameter can
be supplied while executing the prepared statement.
Passing string, float or double values for LIMIT clause
works well from command-line client. That's because, while
setting the LIMIT parameter value from a user-variable,
the value is converted to integer value.
However, when prepared statement is executed from other
interfaces as J connectors, or C applications etc,
the value for the parameters are sent to the server
with execute command. Each item in command has value and
the data TYPE. So, while setting parameter values
from this log, value is set to all the parameters
with the same data type as passed.
Here, we have the logic to convert the value to change the
state and item_type if it is part of LIMIT parameter and
its item_type is not INT.
But when we reset this parameter we save the item_type but change
state. So on second execution we have old item_type but our state
has been changed, which make us to use string type variable
in Item_param::query_str_val(). This cause an assert.
Fix:
Instead of checking the item_type of the parameter, check for
the state of the parameter. As state value are reset everytime
we execute the statement.
ER_LOCK_WAIT_TIMEOUT".
The problem was that after changes caused by fix bug 14188793 "DEADLOCK
CAUSED BY ALTER TABLE DOEN'T CLEAR STATUS OF ROLLBACKED TRANSACTION"/
bug 17054007 "TRANSACTION IS NOT FULLY ROLLED BACK IN CASE OF INNODB
DEADLOCK implicit rollback of transaction which occurred on ER_LOCK_DEADLOCK
(and ER_LOCK_WAIT_TIMEOUT if innodb_rollback_on_timeout option was set)
didn't start new transaction in @@autocommit=1 mode.
Such behavior although consistent with behavior of explicit ROLLBACK has
broken expectations of users and backward compatibility assumptions.
This patch fixes problem by reverting to starting new transaction
in 5.5/5.6.
The plan is to keep new behavior in trunk so the code change from this
patch is to be null-merged there.
Problem:-
In a Procedure, when we are comparing value of select query
with IN clause and they both have different collation, cause
error on first time execution and assert second time.
procedure will have query like
set @x = ((select a from t1) in (select d from t2));<---proc1
sel1 sel2
Analysis:-
When we execute this proc1(first time)
While resolving the fields of user variable, we will call
Item_in_subselect::fix_fields while will resolve sel2. There
in Item_in_subselect::select_transformer, we evaluate the
left expression(sel1) and store it in Item_cache_* object
(to avoid re-evaluating it many times during subquery execution)
by making Item_in_optimizer class.
While evaluating left expression we will prepare sel1.
After that, we will put a new condition in sel2
in Item_in_subselect::select_transformer() which will compare
t2.d and sel1(which is cached in Item_in_optimizer).
Later while checking the collation in agg_item_collations()
we get error and we cleanup the item. While cleaning up we cleaned
the cached value in Item_in_optimizer object.
When we execute the procedure second time, we have condition for
sel2 and while setup_cond(), we can't able to find reference item
as it is cleanup while item cleanup.So it assert.
Solution:-
We should not cleanup the cached value for Item_in_optimizer object,
if we have put the condition to subselect.
Problem:-
In a Procedure, when we are comparing value of select query
with IN clause and they both have different collation, cause
error on first time execution and assert second time.
procedure will have query like
set @x = ((select a from t1) in (select d from t2));<---proc1
sel1 sel2
Analysis:-
When we execute this proc1(first time)
While resolving the fields of user variable, we will call
Item_in_subselect::fix_fields while will resolve sel2. There
in Item_in_subselect::select_transformer, we evaluate the
left expression(sel1) and store it in Item_cache_* object
(to avoid re-evaluating it many times during subquery execution)
by making Item_in_optimizer class.
While evaluating left expression we will prepare sel1.
After that, we will put a new condition in sel2
in Item_in_subselect::select_transformer() which will compare
t2.d and sel1(which is cached in Item_in_optimizer).
Later while checking the collation in agg_item_collations()
we get error and we cleanup the item. While cleaning up we cleaned
the cached value in Item_in_optimizer object.
When we execute the procedure second time, we have condition for
sel2 and while setup_cond(), we can't able to find reference item
as it is cleanup while item cleanup.So it assert.
Solution:-
We should not cleanup the cached value for Item_in_optimizer object,
if we have put the condition to subselect.
THAN LOCALHOST
This is a test bug and the explanation for the behaviour can be found
on the bug page.Modifying the select to select user where user!=root for the line where
failure is encountered on machines with no hostname other than the localhost.
compressed pages
After loading a compressed-only page in buf_page_get_gen() we allocate a new
block for decompression. The problem is that the compressed page is neither
buffer-fixed nor I/O-fixed by the time we call buf_LRU_get_free_block(),
so it may end up being evicted and returned back as a new block.
buf_page_get_gen(): Temporarily buffer-fix the compressed-only block
while allocating memory for an uncompressed page frame.
This should prevent this form of the infinite loop, which is more likely
with a small innodb_buffer_pool_size.
rb#2511 approved by Jimmy Yang, Sunny Bains
