file .\item_subselect.cc, line 836
IN quantified predicates are never executed directly. They are rather wrapped
inside nodes called IN Optimizers (Item_in_optimizer) which take care of the
execution. However, this is not done during query preparation. Unfortunately
the LIKE predicate pre-evaluates constant right-hand side arguments even
during name resolution. Likely this is meant as an optimization.
Fixed by not pre-evaluating LIKE arguments in view prepare mode.
The enum system variables were handled inconsistently
as ints, unsigned int and unsigned long on various places.
This caused problems on platforms on which
sizeof(int) != sizeof(long).
Fixed by homogenizing the type of the enum variables
to unsigned int, since it's size compatible with the C enum
type.
Removed the test from the experimental list.
With statement- or mixed-mode logging, "LOAD DATA INFILE" queries
are written to the binlog using special types of log events.
When mysqlbinlog reads such events, it re-creates the file in a
temporary directory with a generated filename and outputs a
"LOAD DATA INFILE" query where the filename is replaced by the
generated file. The temporary file is not deleted by mysqlbinlog
after termination.
To fix the problem, in mixed mode we go to row-based. In SBR, we
document it to remind user the tmpfile is left in a temporary
directory.
In order to be able to check if the set of the grouping fields in a
GROUP BY has changed (and thus to start a new group) the optimizer
caches the current values of these fields in a set of Cached_item
derived objects.
The Cached_item_str, used for caching varchar and TEXT columns,
is limited in length by the max_sort_length variable.
A String buffer to store the value with an alloced length of either
the max length of the string or the value of max_sort_length
(whichever is smaller) in Cached_item_str's constructor.
Then, at compare time the value of the string to compare to was
truncated to the alloced length of the string buffer inside
Cached_item_str.
This is all fine and valid, but only if you're not assigning
values near or equal to the alloced length of this buffer.
Because when assigning values like this the alloced length is
rounded up and as a result the next set of data will not match the
group buffer, thus leading to wrong results because of the changed
alloced_length.
Fixed by preserving the original maximum length in the
Cached_item_str's constructor and using this instead of the
alloced_length to limit the string to compare to.
Test case added.
Fix a regression (due to a typo) which caused spurious incorrect
argument errors for long data stream parameters if all forms of
logging were disabled (binary, general and slow logs).
With statement- or mixed-mode logging, "LOAD DATA INFILE" queries
are written to the binlog using special types of log events.
When mysqlbinlog reads such events, it re-creates the file in a
temporary directory with a generated filename and outputs a
"LOAD DATA INFILE" query where the filename is replaced by the
generated file. The temporary file is not deleted by mysqlbinlog
after termination.
To fix the problem, in mixed mode we go to row-based. In SBR, we
document it to remind user the tmpfile is left in a temporary
directory.
The problem is that the fix Bug#29784 was mistakenly
reverted when updating YaSSL to a newer version.
The solution is to re-apply the fix and this time
actually add a meaningful test case so that possible
regressions are caught.
/*![:version:] Query Code */, where [:version:] is a sequence of 5
digits representing the mysql server version(e.g /*!50200 ... */),
is a special comment that the query in it can be executed on those
servers whose versions are larger than the version appearing in the
comment. It leads to a security issue when slave's version is larger
than master's. A malicious user can improve his privileges on slaves.
Because slave SQL thread is running with SUPER privileges, so it can
execute queries that he/she does not have privileges on master.
This bug is fixed with the logic below:
- To replace '!' with ' ' in the magic comments which are not applied on
master. So they become common comments and will not be applied on slave.
- Example:
'INSERT INTO t1 VALUES (1) /*!10000, (2)*/ /*!99999 ,(3)*/
will be binlogged as
'INSERT INTO t1 VALUES (1) /*!10000, (2)*/ /* 99999 ,(3)*/
SHOW DATABASES LIKE ... was not converting to lowercase on comparison as the
documentation is suggesting.
Fixed it to behave similarly to SHOW TABLES LIKE ... and updated the failing
on MacOSX lowercase_table2 test case.
table with active trx
Essentially, the problem is that InnoDB does a implicit commit
when a cursor (table handler) is unlocked/closed, creating
a dissonance between the transaction state within the server
layer and the storage engine layer. Theoretically, a statement
transaction can encompass several table instances in a similar
manner to a multiple statement transaction, hence it does not
make sense to limit a statement transaction to the lifetime of
the table instances (cursors) used within it.
Since this particular instance of the problem is only triggerable
on 5.1 and is masked on 5.5 due 2PC being skipped (assertion is in
the prepare phase of a 2PC), the solution (which is less risky) is
to explicitly end the transaction before the cached table is unlock
on rename table.
The patch is to be null merged into trunk.
Problem: when SHOW BINLOG EVENTS was issued, it increased the value of
@@session.max_allowed_packet. This allowed a non-root user to increase
the amount of memory used by her thread arbitrarily. Thus, it removes
the bound on the amount of system resources used by a client, so it
presents a security risk (DoS attack).
Fix: it is correct to increase the value of @@session.max_allowed_packet
while executing SHOW BINLOG EVENTS (see BUG 30435). However, the
increase should only be temporary. Thus, the fix is to restore the value
when SHOW BINLOG EVENTS ends.
The value of @@session.max_allowed_packet is also increased in
mysql_binlog_send (i.e., the binlog dump thread). It is not clear if this
can cause any trouble, since normally the client that issues
COM_BINLOG_DUMP will not issue any other commands that would be affected
by the increased value of @@session.max_allowed_packet. However, we
restore the value just in case.
This assert checks that the server does not try to send OK to the
client if there has been some error during processing. This is done
to make sure that the error is in fact sent to the client.
The problem was that view errors during processing of WHERE conditions
in UPDATE statements where not detected by the update code. It therefore
tried to send OK to the client, triggering the assert.
The bug was only noticeable in debug builds.
This patch fixes the problem by making sure that the update code
checks for errors during condition processing and acts accordingly.
Merge up to sunny.bains@oracle.com-20100625081841-ppulnkjk1qlazh82 .
There are 8 more changesets in mysql-5.1-innodb, but PB2 shows a
failure for a test added in one of them. If that is resolved quickly
then those 8 more changesets will be merged too.
The problem is that QUICK_SELECT_DESC behaviour depends
on used_key_parts value which can be bigger than selected
best_key_parts value if an engine supports clustered key.
But used_key_parts is overwritten with best_key_parts
value that prevents from correct selection of index
access method. The fix is to preserve used_key_parts
value for further use in QUICK_SELECT_DESC.
DROP USER
RENAME USER CURRENT_USER() ...
GRANT ... TO CURRENT_USER()
REVOKE ... FROM CURRENT_USER()
ALTER DEFINER = CURRENT_USER() EVENTbut, When these statements are binlogged, CURRENT_USER() just is binlogged
as 'CURRENT_USER()', it is not expanded to the real user name. When slave
executes the log event, 'CURRENT_USER()' is expand to the user of slave
SQL thread, but SQL thread's user name always NULL. This breaks the replication.
After this patch, session's user will be written into query log events
if these statements call CURREN_USER() or 'ALTER EVENT' does not assign a definer.
This deadlock happened if DROP DATABASE was blocked due to an open
HANDLER table from a different connection. While DROP DATABASE
is blocked, it holds the LOCK_mysql_create_db mutex. This results
in a deadlock if the connection with the open HANDLER table tries
to execute a CREATE/ALTER/DROP DATABASE statement as they all
try to acquire LOCK_mysql_create_db.
This patch makes this deadlock scenario very unlikely by closing and
marking for re-open all HANDLER tables for which there are pending
conflicing locks, before LOCK_mysql_create_db is acquired.
However, there is still a very slight possibility that a connection
could access one of these HANDLER tables between closing/marking for
re-open and the acquisition of LOCK_mysql_create_db.
This patch is for 5.1 only, a separate and complete fix will be
made for 5.5+.
Test case added to schema.test.
During creation of the table list of
processed tables hidden I_S table 'VARIABLES'
is erroneously added into the table list.
it leads to ER_UNKNOWN_TABLE error in
TABLE_LIST::add_table_to_list() function.
The fix is to skip addition of hidden I_S
tables into the table list.
require O(#scans) memory
When an index merge operation was restarted, it would
re-allocate the Unique object controlling the duplicate row
ID elimination. Fixed by making the Unique object a member
of QUICK_INDEX_MERGE_SELECT and thus reusing it throughout
the lifetime of this object.
ha_innobase::create(): Add the local variable row_type = form->s->row_type.
Adjust it to ROW_TYPE_COMPRESSED when ROW_FORMAT is not specified or inherited
but KEY_BLOCK_SIZE is. Observe the inherited ROW_FORMAT even when it is not
explicitly specified.
innodb_bug54679.test: New test, to test the bug and to ensure that there are
no regressions. (The only difference in the test result without the patch
applied is that the first ALTER TABLE changes ROW_FORMAT to Compact.)
file .\filesort.cc, line 149 (part II)
Problem: the server didn't disregard sort order
for some zero length tuples.
Fix: skip sort order in such a case
(zero length NOT NULL string functions).
and reverse() function
3 problems fixed :
1. The reported problem : caused by incorrect parsing of
the file as ucs data resulting in wrong length of the parsed
string. Fixed by truncating the invalid trailing bytes
(non-complete multibyte characters) when reading from the file
2. LOAD DATA when reading from a proper UCS2 file wasn't
recognizing the new line characters. Fixed by first looking
if a byte is a new line (or any other special) character before
reading it as a part of a multibyte character.
3. When using user variables to hold the column data in LOAD
DATA the character set of the user variable was set incorrectly
to the database charset. Fixed by setting it to the charset
specified by LOAD DATA (if any).
The problem there is that HAVING condition evaluates const
parts of condition despite the condition has references
on aggregate functions. Table t1 became const tables
after make_join_statistics and table1.pk = 1, HAVING is
transformed into MAX(1) < 7 and taken away from HAVING.
The fix is to skip evaluation of HAVING conts parts if
HAVING condition has references on aggregate functions.
Fixed an incomplete historical ALTER TABLE MODIFY trimming the trigger
privilege bit from mysql.tables_priv.Table_priv column.
Removed the duplicate ALTER TABLE MODIFY.
Test suite added.
