TABLES <list> WITH READ LOCK are incompatible".
The problem was that FLUSH TABLES <list> WITH READ LOCK
which was issued when other connection has acquired global
read lock using FLUSH TABLES WITH READ LOCK was blocked
and has to wait until global read lock is released.
This issue stemmed from the fact that FLUSH TABLES <list>
WITH READ LOCK implementation has acquired X metadata locks
on tables to be flushed. Since these locks required acquiring
of global IX lock this statement was incompatible with global
read lock.
This patch addresses problem by using SNW metadata type of
lock for tables to be flushed by FLUSH TABLES <list> WITH
READ LOCK. It is OK to acquire them without global IX lock
as long as we won't try to upgrade those locks. Since SNW
locks allow concurrent statements using same table FLUSH
TABLE <list> WITH READ LOCK now has to wait until old
versions of tables to be flushed go away after acquiring
metadata locks. Since such waiting can lead to deadlock
MDL deadlock detector was extended to take into account
waits for flush and resolve such deadlocks.
As a bonus code in open_tables() which was responsible for
waiting old versions of tables to go away was refactored.
Now when we encounter old version of table in open_table()
we don't back-off and wait for all old version to go away,
but instead wait for this particular table to be flushed.
Such approach supported by deadlock detection should reduce
number of scenarios in which FLUSH TABLES aborts concurrent
multi-statement transactions.
Note that active FLUSH TABLES <list> WITH READ LOCK still
blocks concurrent FLUSH TABLES WITH READ LOCK statement
as the former keeps tables open and thus prevents the
latter statement from doing flush.
mysql-test/include/handler.inc:
Adjusted test case after changing status which is set
when FLUSH TABLES waits for tables to be flushed from
"Flushing tables" to "Waiting for table".
mysql-test/r/flush.result:
Added test which checks that "flush tables <list> with
read lock" is compatible with active "flush tables with
read lock" but not vice-versa. This test also covers
bug #52044 "FLUSH TABLES WITH READ LOCK and FLUSH TABLES
<list> WITH READ LOCK are incompatible".
mysql-test/r/mdl_sync.result:
Added scenarios in which wait for table to be flushed
causes deadlocks to the coverage of MDL deadlock detector.
mysql-test/suite/perfschema/r/dml_setup_instruments.result:
Adjusted test results after removal of COND_refresh
condition variable.
mysql-test/suite/perfschema/r/server_init.result:
Adjusted test and its results after removal of COND_refresh
condition variable.
mysql-test/suite/perfschema/t/server_init.test:
Adjusted test and its results after removal of COND_refresh
condition variable.
mysql-test/t/flush.test:
Added test which checks that "flush tables <list> with
read lock" is compatible with active "flush tables with
read lock" but not vice-versa. This test also covers
bug #52044 "FLUSH TABLES WITH READ LOCK and FLUSH TABLES
<list> WITH READ LOCK are incompatible".
mysql-test/t/kill.test:
Adjusted test case after changing status which is set
when FLUSH TABLES waits for tables to be flushed from
"Flushing tables" to "Waiting for table".
mysql-test/t/lock_multi.test:
Adjusted test case after changing status which is set
when FLUSH TABLES waits for tables to be flushed from
"Flushing tables" to "Waiting for table".
mysql-test/t/mdl_sync.test:
Added scenarios in which wait for table to be flushed
causes deadlocks to the coverage of MDL deadlock detector.
sql/ha_ndbcluster.cc:
Adjusted code after adding one more parameter for
close_cached_tables() call - timeout for waiting for
table to be flushed.
sql/ha_ndbcluster_binlog.cc:
Adjusted code after adding one more parameter for
close_cached_tables() call - timeout for waiting for
table to be flushed.
sql/lock.cc:
Removed COND_refresh condition variable. See comment
for sql_base.cc for details.
sql/mdl.cc:
Now MDL deadlock detector takes into account information
about waits for table flushes when searching for deadlock.
To implement this change:
- Declaration of enum_deadlock_weight and
Deadlock_detection_visitor were moved to mdl.h header
to make them available to the code in table.cc which
implements deadlock detector traversal through edges
of waiters graph representing waiting for flush.
- Since now MDL_context may wait not only for metadata
lock but also for table to be flushed an abstract
Wait_for_edge class was introduced. Its descendants
MDL_ticket and Flush_ticket incapsulate specifics
of inspecting waiters graph when following through
edge representing wait of particular type.
We no longer require global IX metadata lock when acquiring
SNW or SNRW locks. Such locks are needed only when metadata
locks of these types are upgraded to X locks. This allows
to use SNW locks in FLUSH TABLES <list> WITH READ LOCK
implementation and keep the latter compatible with global
read lock.
sql/mdl.h:
Now MDL deadlock detector takes into account information
about waits for table flushes when searching for deadlock.
To implement this change:
- Declaration of enum_deadlock_weight and
Deadlock_detection_visitor were moved to mdl.h header
to make them available to the code in table.cc which
implements deadlock detector traversal through edges
of waiters graph representing waiting for flush.
- Since now MDL_context may wait not only for metadata
lock but also for table to be flushed an abstract
Wait_for_edge class was introduced. Its descendants
MDL_ticket and Flush_ticket incapsulate specifics
of inspecting waiters graph when following through
edge representing wait of particular type.
- Deadlock_detection_visitor now has m_table_shares_visited
member which allows to support recursive locking for
LOCK_open. This is required when deadlock detector
inspects waiters graph which contains several edges
representing waits for flushes or needs to come through
the such edge more than once.
sql/mysqld.cc:
Removed COND_refresh condition variable. See comment
for sql_base.cc for details.
sql/mysqld.h:
Removed COND_refresh condition variable. See comment
for sql_base.cc for details.
sql/sql_base.cc:
Changed approach to how threads are waiting for table
to be flushed. Now thread that wants to wait for old
table to go away subscribes for notification by adding
Flush_ticket to table's share and waits using
MDL_context::m_wait object. Once table gets flushed
(i.e. all tables are closed and table share is ready
to be destroyed) all such waiters are notified
individually.
Thanks to this change MDL deadlock detector can take
such waits into account.
To implement this/as result of this change:
- tdc_wait_for_old_versions() was replaced with
tdc_wait_for_old_version() which waits for individual
old share to go away and which is called by open_table()
after finding out that share is outdated. We don't
need to perform back-off before such waiting thanks
to the fact that deadlock detector now sees such waits.
- As result Open_table_ctx::m_mdl_requests became
unnecessary and was removed. We no longer allocate
copies of MDL_request objects on MEM_ROOT when
MYSQL_OPEN_FORCE_SHARED/SHARED_HIGH_PRIO flags are
in effect.
- close_cached_tables() and tdc_wait_for_old_version()
share code which implements waiting for share to be
flushed - the both use TABLE_SHARE::wait_until_flush()
method. Thanks to this close_cached_tables() supports
timeouts and has extra parameter for this.
- Open_table_context::OT_MDL_CONFLICT enum element was
renamed to OT_CONFLICT as it is now also used in cases
when back-off is required to resolve deadlock caused
by waiting for flush and not metadata lock.
- In cases when we discover that current connection tries
to open tables from different generation we now simply
back-off and restart process of opening tables. To
support this Open_table_context::OT_REOPEN_TABLES enum
element was added.
- COND_refresh condition variable became unnecessary and
was removed.
- mysql_notify_thread_having_shared_lock() no longer wakes
up connections waiting for flush as all such connections
can be waken up by deadlock detector if necessary.
sql/sql_base.h:
- close_cached_tables() now has one more parameter -
timeout for waiting for table to be flushed.
- Open_table_context::OT_MDL_CONFLICT enum element was
renamed to OT_CONFLICT as it is now also used in cases
when back-off is required to resolve deadlock caused
by waiting for flush and not metadata lock.
Added new OT_REOPEN_TABLES enum element to be used in
cases when we need to restart open tables process even
in the middle of transaction.
- Open_table_ctx::m_mdl_requests became unnecessary and
was removed.
sql/sql_class.h:
Added assert ensuring that we won't use LOCK_open mutex
with THD::enter_cond(). Otherwise deadlocks can arise in
MDL deadlock detector.
sql/sql_parse.cc:
Changed FLUSH TABLES <list> WITH READ LOCK to take SNW
metadata locks instead of X locks on tables to be flushed.
Since we no longer require global IX lock to be taken
when SNW locks are taken this makes this statement
compatible with FLUSH TABLES WITH READ LOCK statement.
Since SNW locks allow other connections to have table
opened FLUSH TABLES <list> WITH READ LOCK now has to
wait during open_tables() for old version to go away.
Such waits can lead to deadlocks which will be detected
by MDL deadlock detector which now takes waits for table
to be flushed into account.
Also adjusted code after adding one more parameter for
close_cached_tables() call - timeout for waiting for
table to be flushed.
sql/sql_yacc.yy:
FLUSH TABLES <list> WITH READ LOCK now needs only SNW
metadata locks on tables.
sql/sys_vars.cc:
Adjusted code after adding one more parameter for
close_cached_tables() call - timeout for waiting for
table to be flushed.
sql/table.cc:
Implemented new approach to how threads are waiting for
table to be flushed. Now thread that wants to wait for
old table to go away subscribes for notification by
adding Flush_ticket to table's share and waits using
MDL_context::m_wait object. Once table gets flushed
(i.e. all tables are closed and table share is ready
to be destroyed) all such waiters are notified
individually. This change allows to make such waits
visible inside of MDL deadlock detector.
To do it:
- Added list of waiters/Flush_tickets to TABLE_SHARE
class.
- Changed free_table_share() to postpone freeing of
share memory until last waiter goes away and to
wake up subscribed waiters.
- Added TABLE_SHARE::wait_until_flushed() method which
implements subscription to the list of waiters for
table to be flushed and waiting for this event.
Implemented interface which allows to expose waits for
flushes to MDL deadlock detector:
- Introduced Flush_ticket class a descendant of
Wait_for_edge class.
- Added TABLE_SHARE::find_deadlock() method which allows
deadlock detector to find out what contexts are still
using old version of table in question (i.e. to find
out what contexts are waited for by owner of
Flush_ticket).
sql/table.h:
In order to support new strategy of waiting for table flush
(see comment for table.cc for details) added list of
waiters/Flush_tickets to TABLE_SHARE class.
Implemented interface which allows to expose waits for
flushes to MDL deadlock detector:
- Introduced Flush_ticket class a descendant of
Wait_for_edge class.
- Added TABLE_SHARE::find_deadlock() method which allows
deadlock detector to find out what contexts are still
using old version of table in question (i.e. to find
out what contexts are waited for by owner of
Flush_ticket).
DATABASE with open HANDLER"
Remove LOCK_create_db, database name locks, and use metadata locks instead.
This exposes CREATE/DROP/ALTER DATABASE statements to the graph-based
deadlock detector in MDL, and paves the way for a safe, deadlock-free
implementation of RENAME DATABASE.
Database DDL statements will now take exclusive metadata locks on
the database name, while table/view/routine DDL statements take
intention exclusive locks on the database name. This prevents race
conditions between database DDL and table/view/routine DDL.
(e.g. DROP DATABASE with concurrent CREATE/ALTER/DROP TABLE)
By adding database name locks, this patch implements
WL#4450 "DDL locking: CREATE/DROP DATABASE must use database locks" and
WL#4985 "DDL locking: namespace/hierarchical locks".
The patch also changes code to use init_one_table() where appropriate.
The new lock_table_names() function requires TABLE_LIST::db_length to
be set correctly, and this is taken care of by init_one_table().
This patch also adds a simple template to help work with
the mysys HASH data structure.
Most of the patch was written by Konstantin Osipov.
subsystem. Fix a number of caveates that the previous
implementation suffered from, including unprotected
access to shared data and lax resource accounting
(share->ref_count) that could lead to deadlocks.
The new implementation still suffers from a number
of potential deadlocks in some edge cases, and this is
still not enabled by default. Especially since performance
testing has shown that it gives only marginable (not even
exceeding measuring accuracy) improvements.
@todo:
- Remove calls to close_cached_tables() with REFRESH_FAST,
and have_lock, because they break the MDL cache.
- rework FLUSH TABLES <list> to not use close_cached_tables()
- make sure that whenever we set TABLE_SHARE::version to
0 we free MDL cache references to it.
sql/mdl.cc:
We may cache references to TABLE_SHARE objects in
MDL_lock objects for tables. Create a separate
MDL_lock class to represent a table.
sql/mdl.h:
Adjust the MDL caching API to avoid races.
sql/sql_base.cc:
Move all caching functionality close together.
Implement a solution for deadlocks caused by
close_cached_tables() when MDL cache is enabled (incomplete).
sql/sql_yacc.yy:
Adjust FLUSH rule to do the necessary initialization of
TABLE_LIST elements used in for FLUSH TABLES <list>, and thus
work OK with flush_mdl_cache() function.
strict aliasing violations.
One somewhat major source of strict-aliasing violations and
related warnings is the SQL_LIST structure. For example,
consider its member function `link_in_list` which takes
a pointer to pointer of type T (any type) as a pointer to
pointer to unsigned char. Dereferencing this pointer, which
is done to reset the next field, violates strict-aliasing
rules and might cause problems for surrounding code that
uses the next field of the object being added to the list.
The solution is to use templates to parametrize the SQL_LIST
structure in order to deference the pointers with compatible
types. As a side bonus, it becomes possible to remove quite
a few casts related to acessing data members of SQL_LIST.
sql/handler.h:
Use the appropriate template type argument.
sql/item.cc:
Remove now-unnecessary cast.
sql/item_subselect.cc:
Remove now-unnecessary casts.
sql/item_sum.cc:
Use the appropriate template type argument.
Remove now-unnecessary cast.
sql/mysql_priv.h:
Move SQL_LIST structure to sql_list.h
Use the appropriate template type argument.
sql/sp.cc:
Remove now-unnecessary casts.
sql/sql_delete.cc:
Use the appropriate template type argument.
Remove now-unnecessary casts.
sql/sql_derived.cc:
Remove now-unnecessary casts.
sql/sql_lex.cc:
Remove now-unnecessary casts.
sql/sql_lex.h:
SQL_LIST now takes a template type argument which must
match the type of the elements of the list. Use forward
declaration when the type is not available, it is used
in pointers anyway.
sql/sql_list.h:
Rename SQL_LIST to SQL_I_List. The template parameter is
the type of object that is stored in the list.
sql/sql_olap.cc:
Remove now-unnecessary casts.
sql/sql_parse.cc:
Remove now-unnecessary casts.
sql/sql_prepare.cc:
Remove now-unnecessary casts.
sql/sql_select.cc:
Remove now-unnecessary casts.
sql/sql_show.cc:
Remove now-unnecessary casts.
sql/sql_table.cc:
Remove now-unnecessary casts.
sql/sql_trigger.cc:
Remove now-unnecessary casts.
sql/sql_union.cc:
Remove now-unnecessary casts.
sql/sql_update.cc:
Remove now-unnecessary casts.
sql/sql_view.cc:
Remove now-unnecessary casts.
sql/sql_yacc.yy:
Remove now-unnecessary casts.
storage/myisammrg/ha_myisammrg.cc:
Remove now-unnecessary casts.
Bug#46527 COMMIT AND CHAIN RELEASE does not make sense
Bug#53343 completion_type=1, COMMIT/ROLLBACK AND CHAIN don't
preserve the isolation level
Bug#53346 completion_type has strange effect in a stored
procedure/prepared statement
Added test cases to verify the expected behaviour of :
SET SESSION TRANSACTION ISOLATION LEVEL,
SET TRANSACTION ISOLATION LEVEL,
@@completion_type,
COMMIT AND CHAIN,
ROLLBACK AND CHAIN
..and some combinations of the above
This crash happened if a table was listed twice in a DROP TABLE statement,
and the statement was executed while in LOCK TABLES mode. Since the two
elements of table list were identical, they were assigned the same TABLE object.
During processing of the first table element, the TABLE instance was destroyed
and the second table list element was left with a dangling reference.
When this reference was later accessed, the server crashed.
Listing the same table twice in DROP TABLES should give an ER_NONUNIQ_TABLE
error. However, this did not happen as the check for unique table names was
skipped due to the lock type for table list elements being set to TL_IGNORE.
Previously TL_UNLOCK was used and the unique check was performed.
This bug was a regression introduced by a pre-requisite patch for
Bug#51263 "Deadlock between transactional SELECT and ALTER TABLE ...
REBUILD PARTITION". The regression only existed in an internal team
tree and never in any released code.
This patch reverts DROP TABLE (and DROP VIEW) to the old behavior of
using TL_UNLOCK locks. Test case added to drop.test.
Conflicts:
Text conflict in mysql-test/r/archive.result
Contents conflict in mysql-test/r/innodb_bug38231.result
Text conflict in mysql-test/r/mdl_sync.result
Text conflict in mysql-test/suite/binlog/t/disabled.def
Text conflict in mysql-test/suite/rpl_ndb/r/rpl_ndb_binlog_format_errors.result
Text conflict in mysql-test/t/archive.test
Contents conflict in mysql-test/t/innodb_bug38231.test
Text conflict in mysql-test/t/mdl_sync.test
Text conflict in sql/sp_head.cc
Text conflict in sql/sql_show.cc
Text conflict in sql/table.cc
Text conflict in sql/table.h
SELECT and ALTER TABLE ... REBUILD PARTITION".
ALTER TABLE on InnoDB table (including partitioned tables)
acquired exclusive locks on rows of table being altered.
In cases when there was concurrent transaction which did
locking reads from this table this sometimes led to a
deadlock which was not detected by MDL subsystem nor by
InnoDB engine (and was reported only after exceeding
innodb_lock_wait_timeout).
This problem stemmed from the fact that ALTER TABLE acquired
TL_WRITE_ALLOW_READ lock on table being altered. This lock
was interpreted as a write lock and thus for table being
altered handler::external_lock() method was called with
F_WRLCK as an argument. As result InnoDB engine treated
ALTER TABLE as an operation which is going to change data
and acquired LOCK_X locks on rows being read from old
version of table.
In case when there was a transaction which already acquired
SR metadata lock on table and some LOCK_S locks on its rows
(e.g. by using it in subquery of DML statement) concurrent
ALTER TABLE was blocked at the moment when it tried to
acquire LOCK_X lock before reading one of these rows.
The transaction's attempt to acquire SW metadata lock on
table being altered led to deadlock, since it had to wait
for ALTER TABLE to release SNW lock. This deadlock was not
detected and got resolved only after timeout expiring
because waiting were happening in two different subsystems.
Similar deadlocks could have occured in other situations.
This patch tries to solve the problem by changing ALTER TABLE
implementation to use TL_READ_NO_INSERT lock instead of
TL_WRITE_ALLOW_READ. After this step handler::external_lock()
is called with F_RDLCK as an argument and InnoDB engine
correctly interprets ALTER TABLE as operation which only
reads data from original version of table. Thanks to this
ALTER TABLE acquires only LOCK_S locks on rows it reads.
This, in its turn, causes inter-subsystem deadlocks to go
away, as all potential lock conflicts and thus deadlocks will
be limited to metadata locking subsystem:
- When ALTER TABLE reads rows from table being altered it
can't encounter any locks which conflict with LOCK_S row
locks. There should be no concurrent transactions holding
LOCK_X row locks. Such a transaction should have been
acquired SW metadata lock on table first which would have
conflicted with ALTER's SNW lock.
- Vice versa, when DML which runs concurrently with ALTER
TABLE tries to lock row it should be requesting only LOCK_S
lock which is compatible with locks acquired by ALTER,
as otherwise such DML must own an SW metadata lock on table
which would be incompatible with ALTER's SNW lock.
mysql-test/r/innodb_mysql_lock2.result:
Added test for bug #51263 "Deadlock between transactional
SELECT and ALTER TABLE ... REBUILD PARTITION".
mysql-test/suite/rpl_ndb/r/rpl_ndb_binlog_format_errors.result:
Since CREATE TRIGGER no longer acquires write lock on table
it is no longer interpreted as an operation which modifies
table data and therefore no longer fails if invoked for
SBR-only engine in ROW mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_binlog_format_errors.test:
Since CREATE TRIGGER no longer acquires write lock on table
it is no longer interpreted as an operation which modifies
table data and therefore no longer fails if invoked for
SBR-only engine in ROW mode.
mysql-test/t/innodb_mysql_lock2.test:
Added test for bug #51263 "Deadlock between transactional
SELECT and ALTER TABLE ... REBUILD PARTITION".
sql/ha_partition.cc:
When ALTER TABLE creates a new partition to be filled from
other partition lock it in F_WRLCK mode instead of using
mode which was used for locking the whole table (it is
F_RDLCK now).
sql/lock.cc:
Replaced conditions which used TL_WRITE_ALLOW_READ
lock type with equivalent conditions using
TL_WRITE_ALLOW_WRITE. This should allow to get rid
of TL_WRITE_ALLOW_READ lock type eventually.
sql/mdl.cc:
Updated outdated comment to reflect current situation.
sql/sql_base.cc:
Replaced conditions which used TL_WRITE_ALLOW_READ
lock type with equivalent conditions using
TL_WRITE_ALLOW_WRITE. This should allow to get rid
of TL_WRITE_ALLOW_READ lock type eventually.
sql/sql_table.cc:
mysql_admin_table():
Use TL_WRITE_ALLOW_WRITE lock type instead of
TL_WRITE_ALLOW_READ to determine that we need to acquire
upgradable metadata lock. This should allow to completely
get rid of TL_WRITE_ALLOW_READ in long term.
mysql_recreate_table():
ALTER TABLE now requires TL_READ_NO_INSERT thr_lock.c lock
instead of TL_WRITE_ALLOW_READ.
sql/sql_trigger.cc:
Changed CREATE/DROP TRIGGER implementation to use
TL_READ_NO_INSERT lock instead of TL_WRITE_ALLOW_READ lock.
The latter is no longer necessary since:
a) We now can rely on metadata locks to achieve proper
isolation between two DDL statements or DDL and DML
statements.
b) This statement does not change any data in table so there
is no need to inform storage engine about it.
sql/sql_yacc.yy:
Changed implementation of ALTER TABLE (and CREATE/DROP INDEX
as a consequence) to use TL_READ_NO_INSERT lock instead of
TL_WRITE_ALLOW_READ lock. This is possible since:
a) We now can rely on metadata locks to achieve proper
isolation between two DDL statements or DDL and DML
statements.
b) This statement only reads data in table being open.
We write data only to the new version of table and
then replace with it old version of table under
X metadata lock.
Thanks to this change InnoDB will no longer acquire LOCK_X
locks on rows being read by ALTER TABLE (instead LOCK_S
locks will be acquired) and thus cause of bug #51263
"Deadlock between transactional SELECT and ALTER TABLE ...
REBUILD PARTITION" is removed.
Did the similar change for CREATE TRIGGER (see comments
for sql_trigger.cc for details).
The problem was that TRUNCATE TABLE didn't take a exclusive
lock on a table if it resorted to truncating via delete of
all rows in the table. Specifically for InnoDB tables, this
could break proper isolation as InnoDB ends up aborting some
granted locks when truncating a table.
The solution is to take a exclusive metadata lock before
TRUNCATE TABLE can proceed. This guarantees that no other
transaction is using the table.
Incompatible change: Truncate via delete no longer fails
if sql_safe_updates is activated (this was a undocumented
side effect).
libmysqld/CMakeLists.txt:
Add new files to the build list.
libmysqld/Makefile.am:
Add new files to the build list.
mysql-test/extra/binlog_tests/binlog_truncate.test:
Add test case for Bug#42643
mysql-test/include/mix1.inc:
Update test case as TRUNCATE TABLE now grabs a exclusive lock.
Ensure that TRUNCATE waits for granted locks on the table.
mysql-test/suite/binlog/t/binlog_truncate_innodb.test:
As with other data modifying statements, TRUNCATE is still not
possible in a transaction with isolation level READ COMMITTED
or READ UNCOMMITED. It would be possible to implement so, but
it is not worth the effort.
mysql-test/suite/binlog/t/binlog_truncate_myisam.test:
Test under different binlog formats.
mysql-test/suite/binlog/t/disabled.def:
Re-enable test case.
mysql-test/t/innodb_bug38231.test:
Truncate no longer works with row-level locks.
mysql-test/t/mdl_sync.test:
Ensure that a acquired lock is not given up due to a conflict.
mysql-test/t/partition_innodb_semi_consistent.test:
End transaction as to release metadata locks.
mysql-test/t/truncate.test:
A metadata lock is now taken before the object is verified.
sql/CMakeLists.txt:
Add new files to the build list.
sql/Makefile.am:
Add new files to the build list.
sql/datadict.cc:
Introduce a new file specific for data dictionary operations.
sql/datadict.h:
Add header file.
sql/sql_base.cc:
Rename data dictionary function.
sql/sql_bitmap.h:
Include dependency.
sql/sql_delete.cc:
Move away from relying on mysql_delete() to delete all rows of
a table. Thus, move any bits related to truncate to sql_truncate.cc
sql/sql_delete.h:
Remove parameter.
sql/sql_parse.cc:
Add protection against the global read lock -- a intention
exclusive lock can be acquired in the truncate path.
sql/sql_show.cc:
Add sync point for testing scenarios where a pending flush
is ignored.
sql/sql_truncate.cc:
Acquire a shared metadata lock before accessing table metadata.
Upgrade the lock to a exclusive one if the table can be re-created.
Rework binlog rules to better reflect the requirements.
sql/sql_yacc.yy:
Set appropriate lock types for table to be truncated.
sql/table.h:
Move to data dictionary header.
transactional SELECT and ALTER TABLE ... REBUILD PARTITION".
The goal of this patch is to decouple type of metadata
lock acquired for table by open_tables() from type of
table-level lock to be acquired on it.
To achieve this we change approach to how we determine what
type of metadata lock should be acquired on table to be open.
Now instead of inferring it at open_tables() time from flags
and type of table-level lock we rely on that type of metadata
lock is properly set at parsing time and is not changed
further.
sql/ha_ndbcluster.cc:
Now one needs to properly initialize table list element's
MDL_request object before calling mysql_rm_table_part2().
sql/lock.cc:
lock_table_names() no longer initializes table list elements'
MDL_request objects. Now proper initialization of these
requests is a responsibility of the caller.
sql/lock.h:
Removed MYSQL_OPEN_TAKE_UPGRADABLE_MDL flag which became
unnecessary. Thanks to the fact that we don't reset type of
requests for metadata locks between re-executions we now can
figure out that upgradable locks are requested by simply
looking at their type which were set in the parser. As result
this flag became redundant.
sql/mdl.h:
Added version of new operator which simplifies allocation of
MDL_request objects on a MEM_ROOT.
sql/sp_head.cc:
Added comment explaining why it is OK to infer type of
metadata lock to request from type of table-level lock
for prelocking.
Added enum_mdl_type argument to sp_add_to_query_tables()
to simplify its usage in trigger implementation.
sql/sp_head.h:
Added enum_mdl_type argument to sp_add_to_query_tables()
to simplify its usage in trigger implementation.
sql/sql_base.cc:
- open_table_get_mdl_lock():
Preserve type of MDL_request for table list element which
was set in the parser by creating MDL_request objects on
memory root if MYSQL_OPEN_FORCE_SHARED_MDL or
MYSQL_OPEN_FORCE_SHARED_HIGH_PRIO_MDL flag were specified.
Thanks to this and to the fact that we no longer reset
type of requests for metadata locks between re-executions
we no longer need to acquire exclusive metadata lock on
table to be created in a special way. This lock is acquired
by code handling acquiring of upgradable locks.
Also changed signature/calling convention for this function
to simplify its usage.
- Accordingly special lock strategy for table list elements
which was used for such locks became unnecessary and was
removed. Other strategies were renamed.
- Since we no longer have guarantee that MDL_request object
which were not satisfied due to lock conflict belongs to
table list element Open_table_context class and its methods
were extended to remember pointer to MDL_request which has
caused problem at request_backoff_action() time and use it
in recover_from_failed_open(). Similar approach is used
for cases when problem from which we need to recover is
not related to MDL but to the table itself. In this case
we store pointer to the element of table list.
- Changed open_tables()/open_tables_check_upgradable_mdl()/
open_tables_acquire_upgradable_mdl() not to rely on
MYSQL_OPEN_TAKE_UPGRADABLE_MDL flag to understand when
upgradable metadata locks should be acquired and not to
infer type of MDL lock from type of table-level lock.
Instead we assume that type of MDL to be acquired was set
in the parser (we can do this as type of MDL_request is
no longer reset between re-executions).
sql/sql_class.h:
Since we no longer have guarantee that MDL_request object
which were not satisfied due to lock conflict belongs to
table list element Open_table_context class and its methods
were extended to remember pointer to MDL_request which has
caused problem at request_backoff_action() time and use it
in recover_from_failed_open(). Similar approach is used
for cases when problem from which we need to recover is
not related to MDL but to the table itself. In this case
we store pointer to the element of table list.
sql/sql_db.cc:
Now one needs to properly initialize table list element's
MDL_request object before calling mysql_rm_table_part2()
or mysql_rename_tables().
sql/sql_lex.cc:
st_select_lex/st_select_lex_node::add_table_to_list() method
now has argument which allows specify type of metadata lock
to be requested for table list element being added.
sql/sql_lex.h:
- st_select_lex/st_select_lex_node::add_table_to_list()
method now has argument which specifies type of metadata
lock to be requested for table list element being added.
This allows to explicitly set type of MDL lock to be
acquired for a DDL statement in parser. It is also more
future-proof than inferring type of MDL request from type
of table-level lock.
- Added Yacc_state::m_mdl_type member which specifies which
type of metadata lock should be requested for tables to be
added to table list by a grammar rule in cases when the same
rule is used in several statements requiring different kinds
of metadata locks.
sql/sql_parse.cc:
- st_select_lex::add_table_to_list() method now has argument
which specifies type of metadata lock to be requested for
table list element being added. This allows to explicitly
set type of MDL lock to be acquired for a DDL statement in
parser. It is also more future-proof than inferring type of
MDL request from type of table-level lock.
- EXCLUSIVE_DOWNGRADABLE_MDL lock strategy has a new name -
OTLS_DOWNGRADE_IF_EXISTS.
- Adjusted LOCK TABLES implementation to the fact that we no
longer infer type of metadata lock to be acquired from table
level lock and that type of MDL request is set at parsing.
And thus MYSQL_OPEN_TAKE_UPGRADABLE_MDL flag became
unnecessary.
sql/sql_prepare.cc:
TABLE_LIST's lock strategy SHARED_MDL was renamed to OTLS_NONE
as now it means that metadata lock should not be changed during
call to open_table() (if it has been already acquired) and is
also used for exclusive metadata lock.
sql/sql_show.cc:
st_select_lex::add_table_to_list() method now has argument
which specifies type of metadata lock to be requested for
table list element being added.
sql/sql_table.cc:
- Adjusted mysql_admin_table()'s code to the fact that
open_tables() no longer determines what kind of metadata
lock should be obtained basing on type of table-level
lock and flags. Instead type of metadata lock for table
to be open should be set before calling open_tables().
- Changed mysql_alter_table() code to the facts:
a) that now it is responsibility of caller to properly
initalize MDL_request in table list elements before calling
lock_table_names()
b) and that MYSQL_OPEN_TAKE_UPGRADABLE_MDL is no longer
necessary since type of metadata lock to be obtained
at open_tables() time is set during parsing.
- Changed code of mysql_recreate_table() to properly set
type of metadata and table-level lock to be obtained
by mysql_alter_table() which it calls.
sql/sql_trigger.cc:
Instead of relying on MYSQL_OPEN_TAKE_UPGRADABLE_MDL flag to
force open_tables() to take an upgradable lock we now specify
exact type of lock to be taken when constructing table list
element for table to be open for CREATE/DROP TRIGGER.
sql/sql_view.cc:
We no longer use TABLE_LIST::EXCLUSIVE_MDL strategy to force
open_tables() to take an exclusive metadata lock on view to
be created. Instead we rely on parser setting proper type of
metadata lock to request and open_tables() acquiring it.
This became possible thanks to the fact that we no longer
reset type of MDL_request between statement re-executions.
sql/sql_yacc.yy:
Instead of inferring type of MDL_request for table to be
open from type of table-level lock and flags passed to
open_tables() we now explicitly specify them at parsing.
This became possible thanks to the fact that we no longer
reset type of MDL_request between statement re-executions.
In future this should allow to decouple type of metadata
lock from type of table-level lock.
The only exception to this approach is statements implemented
through mysql_admin_table() which re-uses same table list
element several times with different types of table-level
and metadata locks.
We now also properly initialize MDL_request objects for table
list elements which are later passed to lock_table_names()
function.
sql/table.cc:
Do not reset type of MDL_request between statement
re-executions. This became unnecessesary as we no longer
change type of MDL_request residing in table list element.
In its turn this change allows to set type of MDL_request
only once - at parsing time.
sql/table.h:
Got rid of TABLE_LIST::EXCLUSIVE_MDL lock strategy.
Now we can specify that we need to acquire exclusive lock
on table to be processed by open_tables() through setting
an appropriate type of MDL_request at parsing time (this
became possible thanks to the fact that we no longer reset
types of MDL_request's belonging to table list elements
between statement re-execution).
Strategy SHARED_MDL was renamed to OTLS_NONE as now it
means that metadata lock should not be changed during call
to open_table() (if it has been already acquired) and is
also used for exclusive metadata lock.
Strategy EXCLUSIVE_DOWNGRADABLE_MDL was renamed to
OTLS_DOWNGRADE_IF_EXISTS.
Conflicts:
Text conflict in mysql-test/r/grant.result
Text conflict in mysql-test/t/grant.test
Text conflict in mysys/mf_loadpath.c
Text conflict in sql/slave.cc
Text conflict in sql/sql_priv.h
Bug#20837 Apparent change of isolation level during transaction,
Bug#46527 COMMIT AND CHAIN RELEASE does not make sense,
Bug#53343 completion_type=1, COMMIT/ROLLBACK AND CHAIN don't
preserve the isolation level
Bug#53346 completion_type has strange effect in a stored
procedure/prepared statement
Make thd->tx_isolation mean strictly "current transaction
isolation level"
Make thd->variables.tx_isolation mean "current session isolation
level".
The current transaction isolation level is now established
at transaction start. If there was a SET TRANSACTION
ISOLATION LEVEL statement, the value is taken from it.
Otherwise, the session value is used.
A change in a session value, made while a transaction is active,
whereas still allowed, no longer has any effect on the
current transaction isolation level. This is an incompatible
change.
A change in a session isolation level, made while there is
no active transaction, overrides SET TRANSACTION statement,
if there was any.
Changed the impelmentation to not look at @@session.completion_type
in the parser, and thus fixed Bug#53346.
Changed the parser to not allow AND NO CHAIN RELEASE,
and thus fixed Bug#46527.
Changed the transaction API to take the current transaction
isolation level into account:
- BEGIN/COMMIT now do preserve the current transaction
isolation level if chaining is on.
- implicit commit, XA COMMIT or XA ROLLBACK or autocommit don't.
This is the 5.1 merge and extension of the fix.
The server was happily accepting paths in table name in all places a table
name is accepted (e.g. a SELECT). This allowed all users that have some
privilege over some database to read all tables in all databases in all
mysql server instances that the server file system has access to.
Fixed by :
1. making sure no path elements are allowed in quoted table name when
constructing the path (note that the path symbols are still valid in table names
when they're properly escaped by the server).
2. checking the #mysql50# prefixed names the same way they're checked for
path elements in mysql-5.0.
consistency: don't use "index" and "key" interchangeably
=> rename "key" to "index"
consistency: all option types are logical, besides ULL
=> rename ULL to NUMBER
don't accept floats where integers are expected
accept hexadecimal where integers are expected
Fix for bug #46947 "Embedded SELECT without FOR UPDATE is
causing a lock", with after-review fixes.
SELECT statements with subqueries referencing InnoDB tables
were acquiring shared locks on rows in these tables when they
were executed in REPEATABLE-READ mode and with statement or
mixed mode binary logging turned on.
This was a regression which were introduced when fixing
bug 39843.
The problem was that for tables belonging to subqueries
parser set TL_READ_DEFAULT as a lock type. In cases when
statement/mixed binary logging at open_tables() time this
type of lock was converted to TL_READ_NO_INSERT lock at
open_tables() time and caused InnoDB engine to acquire
shared locks on reads from these tables. Although in some
cases such behavior was correct (e.g. for subqueries in
DELETE) in case of SELECT it has caused unnecessary locking.
This patch tries to solve this problem by rethinking our
approach to how we handle locking for SELECT and subqueries.
Now we always set TL_READ_DEFAULT lock type for all cases
when we read data. When at open_tables() time this lock
is interpreted as TL_READ_NO_INSERT or TL_READ depending
on whether this statement as a whole or call to function
which uses particular table should be written to the
binary log or not (if yes then statement should be properly
serialized with concurrent statements and stronger lock
should be acquired).
Test coverage is added for both InnoDB and MyISAM.
This patch introduces an "incompatible" change in locking
scheme for subqueries used in SELECT ... FOR UPDATE and
SELECT .. IN SHARE MODE.
In 4.1 the server would use a snapshot InnoDB read for
subqueries in SELECT FOR UPDATE and SELECT .. IN SHARE MODE
statements, regardless of whether the binary log is on or off.
If the user required a different type of read (i.e. locking read),
he/she could request so explicitly by providing FOR UPDATE/IN SHARE MODE
clause for each individual subquery.
On of the patches for 5.0 broke this behaviour (which was not documented
or tested), and started to use locking reads fora all subqueries in SELECT ...
FOR UPDATE/IN SHARE MODE. This patch restored 4.1 behaviour.
mysql-test/include/check_concurrent_insert.inc:
Added auxiliary script which allows to check if statement
reading table allows concurrent inserts in it.
mysql-test/include/check_no_concurrent_insert.inc:
Added auxiliary script which allows to check that statement
reading table doesn't allow concurrent inserts in it.
mysql-test/include/check_no_row_lock.inc:
Added auxiliary script which allows to check if statement
reading table doesn't take locks on its rows.
mysql-test/include/check_shared_row_lock.inc:
Added auxiliary script which allows to check if statement
reading table takes shared locks on some of its rows.
mysql-test/r/bug39022.result:
After bug #46947 'Embedded SELECT without FOR UPDATE is
causing a lock' was fixed test case for bug 39022 has to
be adjusted in order to trigger execution path on which
original problem was encountered.
mysql-test/r/innodb_mysql_lock2.result:
Added coverage for handling of locking in various cases when
we read data from InnoDB tables (includes test case for
bug #46947 'Embedded SELECT without FOR UPDATE is causing a
lock').
mysql-test/r/lock_sync.result:
Added coverage for handling of locking in various cases when
we read data from MyISAM tables.
mysql-test/t/bug39022.test:
After bug #46947 'Embedded SELECT without FOR UPDATE is
causing a lock' was fixed test case for bug 39022 has to
be adjusted in order to trigger execution path on which
original problem was encountered.
mysql-test/t/innodb_mysql_lock2.test:
Added coverage for handling of locking in various cases when
we read data from InnoDB tables (includes test case for
bug #46947 'Embedded SELECT without FOR UPDATE is causing a
lock').
mysql-test/t/lock_sync.test:
Added coverage for handling of locking in various cases when
we read data from MyISAM tables.
sql/log_event.cc:
Since LEX::lock_option member was removed we no longer can
rely on its value in Load_log_event::print_query() to
determine that log event correponds to LOAD DATA CONCURRENT
statement (this was not correct in all situations anyway).
A new Load_log_event's member was introduced as a replacement.
It is initialized at event object construction time and
explicitly indicates whether LOAD DATA was concurrent.
sql/log_event.h:
Since LEX::lock_option member was removed we no longer can
rely on its value in Load_log_event::print_query() to
determine that log event correponds to LOAD DATA CONCURRENT
statement (this was not correct in all situations anyway).
A new Load_log_event's member was introduced as a replacement.
It is initialized at event object construction time and
explicitly indicates whether LOAD DATA was concurrent.
sql/sp_head.cc:
sp_head::reset_lex():
Before parsing substatement reset part of parser state
which needs this (e.g. set Yacc_state::m_lock_type to
default value).
sql/sql_acl.cc:
Since LEX::reset_n_backup_query_tables_list() now also
resets LEX::sql_command member (as it became part of
Query_tables_list class) we have to restore it in cases
when while working with proxy Query_table_list we assume
that LEX::sql_command still corresponds to original SQL
command being executed (for example, when we are logging
statement to the binary log while having Query_tables_list
reset and backed up).
sql/sql_base.cc:
Changed read_lock_type_for_table() to return a weak TL_READ
type of lock in cases when we are executing statement which
won't update tables directly and table doesn't belong to
statement's prelocking list and thus can't be used by a
stored function. It is OK to do so since in this case table
won't be used by statement or function call which will be
written to the binary log, so serializability requirements
for it can be relaxed.
One of results from this change is that SELECTs on InnoDB
tables no longer takes shared row locks for tables which
are used in subqueries (i.e. bug #46947 is fixed).
Another result is that for similar SELECTs on MyISAM tables
concurrent inserts are allowed.
In order to implement this change signature of
read_lock_type_for_table() function was changed to take
pointers to Query_tables_list and TABLE_LIST objects.
sql/sql_base.h:
- Function read_lock_type_for_table() now takes pointers
to Query_tables_list and TABLE_LIST elements as its
arguments since to correctly determine lock type it needs
to know what statement is being performed and whether table
element for which lock type to be determined belongs to
prelocking list.
sql/sql_lex.cc:
- Removed LEX::lock_option and st_select_lex::lock_option
members. Places in parser that were using them now use
Yacc_state::m_lock_type instead.
- To emphasize that LEX::sql_command member is used during
process of opening and locking of tables it was moved to
Query_tables_list class. It is now reset by
Query_tables_list::reset_query_tables_list() method.
sql/sql_lex.h:
- Removed st_select_lex::lock_option member as there is no
real need for per-SELECT lock type (HIGH_PRIORITY option
should apply to the whole statement. FOR UPDATE/LOCK IN
SHARE MODE clauses can be handled without this member).
The main effect which was achieved by introduction of this
member, i.e. using TL_READ_DEFAULT lock type for
subqueries, is now achieved by setting LEX::lock_option
(or rather its replacement - Yacc_state::m_lock_type) to
TL_READ_DEFAULT in almost all cases.
- To emphasize that LEX::sql_command member is used during
process of opening and locking of tables it was moved to
Query_tables_list class.
- Replaced LEX::lock_option with Yacc_state::m_lock_type
in order to emphasize that this value is relevant only
during parsing. Unlike for LEX::lock_option the default
value for Yacc_state::m_lock_type is TL_READ_DEFAULT.
Note that for cases when it is OK to take a "weak" read
lock (e.g. simple SELECT) this lock type will be converted
to TL_READ at open_tables() time. So this change won't
cause negative change in behavior for such statements.
OTOH this change ensures that, for example, for SELECTs
which are used in stored functions TL_READ_NO_INSERT lock
is taken when necessary and as result calls to such stored
functions can be written to the binary log with correct
serialization.
sql/sql_load.cc:
Load_log_event constructor now requires a parameter that
indicates whether LOAD DATA is concurrent.
sql/sql_parse.cc:
LEX::lock_option was replaced with Yacc_state::m_lock_type.
And instead of resetting the latter implicitly in
mysql_init_multi_delete() we do it explicitly in the
places in parser which call this function.
sql/sql_priv.h:
- To be able more easily distinguish high-priority SELECTs
in st_select_lex::print() method added flag for
HIGH_PRIORITY option.
sql/sql_select.cc:
Changed code not to rely on LEX::lock_option to determine
that it is high-priority SELECT. It was replaced with
Yacc_state::m_lock_type which is accessible only at
parse time. So instead of LEX::lock_option we now rely
on a newly introduced flag for st_select_lex::options -
SELECT_HIGH_PRIORITY.
sql/sql_show.cc:
Since LEX::reset_n_backup_query_tables_list() now also
resets LEX::sql_command member (as it became part of
Query_tables_list class) we have to restore it in cases
when while working with proxy Query_table_list we assume
that LEX::sql_command still corresponds to original SQL
command being executed.
sql/sql_table.cc:
Since LEX::reset_query_tables_list() now also resets
LEX::sql_command member (as it became part of
Query_tables_list class) we have to restore value of this
member when this method is called by mysql_admin_table(),
to make this code safe for re-execution.
sql/sql_trigger.cc:
Since LEX::reset_n_backup_query_tables_list() now also
resets LEX::sql_command member (as it became part of
Query_tables_list class) we have to restore it in cases
when while working with proxy Query_table_list we assume
that LEX::sql_command still corresponds to original SQL
command being executed (for example, when we are logging
statement to the binary log while having Query_tables_list
reset and backed up).
sql/sql_update.cc:
Function read_lock_type_for_table() now takes pointers
to Query_tables_list and TABLE_LIST elements as its
arguments since to correctly determine lock type it needs
to know what statement is being performed and whether table
element for which lock type to be determined belongs to
prelocking list.
sql/sql_yacc.yy:
- Removed st_select_lex::lock_option member as there is no
real need for per-SELECT lock type (HIGH_PRIORITY option
should apply to the whole statement. FOR UPDATE/LOCK IN
SHARE MODE clauses can be handled without this member).
The main effect which was achieved by introduction of this
member, i.e. using TL_READ_DEFAULT lock type for
subqueries, is now achieved by setting LEX::lock_option
(or rather its replacement - Yacc_state::m_lock_type) to
TL_READ_DEFAULT in almost all cases.
- Replaced LEX::lock_option with Yacc_state::m_lock_type
in order to emphasize that this value is relevant only
during parsing. Unlike for LEX::lock_option the default
value for Yacc_state::m_lock_type is TL_READ_DEFAULT.
Note that for cases when it is OK to take a "weak" read
lock (e.g. simple SELECT) this lock type will be converted
to TL_READ at open_tables() time. So this change won't
cause negative change in behavior for such statements.
OTOH this change ensures that, for example, for SELECTs
which are used in stored functions TL_READ_NO_INSERT lock
is taken when necessary and as result calls to such stored
functions can be written to the binary log with correct
serialization.
- To be able more easily distinguish high-priority SELECTs
in st_select_lex::print() method we now use new flag
in st_select_lex::options bit-field.
Allow stored procedure variables in LIMIT clause.
Only allow variables of INTEGER types.
Handle negative values by means of an implicit cast to UNSIGNED
(similarly to prepared statement placeholders).
Add tests.
Make sure replication works by not doing NAME_CONST substitution
for variables in LIMIT clause.
Add replication tests.
mysql-test/r/sp.result:
Update results (Bug#11918).
mysql-test/suite/rpl/r/rpl_sp.result:
Update results (Bug#11918).
mysql-test/suite/rpl/t/rpl_sp.test:
Add a test case for Bug#11918.
mysql-test/t/sp.test:
Add a test case for Bug#11918.
sql/item.cc:
Mark sp variables in LIMIT clause (a hack for replication).
sql/item.h:
Mark sp variables in LIMIT clause (a hack for replication).
sql/share/errmsg-utf8.txt:
Add a new error message (a type mismatch for LIMIT
clause parameter).
sql/sp_head.cc:
Binlog rewrite sp variables in LIMIT clause without NAME_CONST
substitution.
sql/sql_string.cc:
Implement append_ulonglong method.
sql/sql_string.h:
Declare append_ulonglong().
sql/sql_yacc.yy:
Support stored procedure variables in LIMIT.
Docs/sp-imp-spec.txt:
New sql_mode added.
include/my_base.h:
Flag in frm of create options.
libmysqld/CMakeLists.txt:
New files added.
libmysqld/Makefile.am:
New files added.
mysql-test/r/events_bugs.result:
New sql_mode added.
mysql-test/r/information_schema.result:
New sql_mode added.
mysql-test/r/sp.result:
New sql_mode added.
mysql-test/r/system_mysql_db.result:
New sql_mode added.
mysql-test/suite/funcs_1/r/is_columns_mysql.result:
New sql_mode added.
mysql-test/suite/funcs_1/r/is_columns_mysql_embedded.result:
New sql_mode added.
mysql-test/t/events_bugs.test:
New sql_mode added.
mysql-test/t/sp.test:
New sql_mode added.
scripts/mysql_system_tables.sql:
New sql_mode added.
scripts/mysql_system_tables_fix.sql:
New sql_mode added.
sql/CMakeLists.txt:
New files added.
sql/Makefile.am:
New files added.
sql/event_db_repository.cc:
New sql_mode added.
sql/field.cc:
Create options support added.
sql/field.h:
Create options support added.
sql/ha_partition.cc:
Create options support added.
sql/handler.cc:
Create options support added.
sql/handler.h:
Create options support added.
sql/log_event.h:
New sql_mode added.
sql/mysql_priv.h:
New sql_mode added.
sql/mysqld.cc:
New sql_mode added.
sql/share/errmsg.txt:
New error messages added.
sql/sp.cc:
New sql_mode added.
sql/sp_head.cc:
Create options support added.
sql/sql_class.cc:
Create options support added.
Debug added.
sql/sql_class.h:
Create options support added.
sql/sql_insert.cc:
my_safe_a* moved to mysqld_priv.h
sql/sql_lex.h:
Create options support added.
sql/sql_parse.cc:
Create options support added.
sql/sql_show.cc:
Create options support added.
sql/sql_table.cc:
Create options support added.
sql/sql_view.cc:
New sql_mode added.
sql/sql_yacc.yy:
Create options support added.
sql/structs.h:
Create options support added.
sql/table.cc:
Create options support added.
sql/table.h:
Create options support added.
sql/unireg.cc:
Create options support added.
storage/example/ha_example.cc:
Create options example.
storage/example/ha_example.h:
Create options example.
storage/pbxt/src/discover_xt.cc:
Create options support added.
Fixed valgrind warnings found from running main.connect under valgrind
sql/sp_head.cc:
Ensure that vcol_info is reset
sql/sql_acl.cc:
Fixed usage of wrong memroot for password
sql/sql_yacc.yy:
Ensure that vcol_info is reset
This patch:
- Moves all definitions from the mysql_priv.h file into
header files for the component where the variable is
defined
- Creates header files if the component lacks one
- Eliminates all include directives from mysql_priv.h
- Eliminates all circular include cycles
- Rename time.cc to sql_time.cc
- Rename mysql_priv.h to sql_priv.h
Makefile.am:
add new API files to the check_abi rule,
remove duplicates
client/CMakeLists.txt:
now a client can use dlopen too
client/Makefile.am:
be csh-friendly
include/my_global.h:
add dummy plugs for dlopen and co.
for the code that needs them to work in static builds
mysys/Makefile.am:
be csh-friendly
plugin/auth/dialog.c:
typo fixed
mysql-test/extra/rpl_tests/rpl_tmp_table_and_DDL.test:
Added missing sync_slave_with_master; Fixes random failures
mysql-test/include/default_mysqld.cnf:
default-character-set -> character-set-server (removes warning in error files for usage of deprecated options)
mysql-test/lib/My/SafeProcess/safe_process.cc:
Fixed compiler warning
mysql-test/lib/v1/mysql-test-run.pl:
default-character-set -> character-set-server (removes warning in error files for usage of deprecated options)
mysql-test/suite/rpl/r/rpl_do_grant.result:
Updated test results
mysql-test/suite/rpl/t/rpl_do_grant.test:
Added missing sync_slave_with_master; Fixes random failures
Had to explictely do stop slave before DROP USER to avoid failure on slave as the user is already dropped on slave.
mysql-test/suite/rpl/t/rpl_name_const.test:
Added missing sync_slave_with_master; Fixes random failures
mysql-test/suite/rpl/t/rpl_row_basic_11bugs.test:
Added missing sync_slave_with_master; Fixes random failures
mysql-test/t/bug47671-master.opt:
default-character-set -> character-set-server (removes warning in error files for usage of deprecated options)
mysql-test/t/ctype_latin1_de-master.opt:
default-character-set -> character-set-server (removes warning in error files for usage of deprecated options)
mysql-test/t/ctype_ucs2_def-master.opt:
default-character-set -> character-set-server (removes warning in error files for usage of deprecated options)
sql-common/client.c:
Fixed compiler warning
sql/item.cc:
Renamed function to remove compiler warnings (with gcc)
sql/item.h:
Renamed function to remove compiler warnings (with gcc)
sql/item_cmpfunc.cc:
Renamed function to remove compiler warnings (with gcc)
sql/item_create.cc:
Renamed function to remove compiler warnings (with gcc)
sql/item_create.h:
Renamed function to remove compiler warnings (with gcc)
sql/item_sum.cc:
Renamed function to remove compiler warnings (with gcc)
sql/item_sum.h:
Renamed function to remove compiler warnings (with gcc)
sql/set_var.cc:
Don't use bit_do_set() / bot_is_set() / bit_do_clear() as this generates compiler warnings
(They are also of no use as we know the value can hold the bits)
sql/sql_yacc.yy:
Renamed function to remove compiler warnings (with gcc)
storage/example/ha_example.h:
Fixed old read_time() prototype
storage/maria/ma_search.c:
Added extra variables to remove compiler warnings
storage/maria/maria_def.h:
Added extra variables to remove compiler warnings
storage/myisam/ft_stopwords.c:
Added cast to get rid of compiler warning
storage/xtradb/fil/fil0fil.c:
Added cast to get rid of compiler warning
storage/xtradb/include/page0page.h:
Added const to get rid of compiler warning
storage/xtradb/include/page0page.ic:
Added const to get rid of compiler warning
support-files/compiler_warnings.supp:
Added suppression of strict-aliasing
Conflicts:
Text conflict in client/mysqlbinlog.cc
Text conflict in mysql-test/Makefile.am
Text conflict in mysql-test/collections/default.daily
Text conflict in mysql-test/r/mysqlbinlog_row_innodb.result
Text conflict in mysql-test/suite/rpl/r/rpl_typeconv_innodb.result
Text conflict in mysql-test/suite/rpl/t/rpl_get_master_version_and_clock.test
Text conflict in mysql-test/suite/rpl/t/rpl_row_create_table.test
Text conflict in mysql-test/suite/rpl/t/rpl_slave_skip.test
Text conflict in mysql-test/suite/rpl/t/rpl_typeconv_innodb.test
Text conflict in mysys/charset.c
Text conflict in sql/field.cc
Text conflict in sql/field.h
Text conflict in sql/item.h
Text conflict in sql/item_func.cc
Text conflict in sql/log.cc
Text conflict in sql/log_event.cc
Text conflict in sql/log_event_old.cc
Text conflict in sql/mysqld.cc
Text conflict in sql/rpl_utility.cc
Text conflict in sql/rpl_utility.h
Text conflict in sql/set_var.cc
Text conflict in sql/share/Makefile.am
Text conflict in sql/sql_delete.cc
Text conflict in sql/sql_plugin.cc
Text conflict in sql/sql_select.cc
Text conflict in sql/sql_table.cc
Text conflict in storage/example/ha_example.h
Text conflict in storage/federated/ha_federated.cc
Text conflict in storage/myisammrg/ha_myisammrg.cc
Text conflict in storage/myisammrg/myrg_open.c
Conflicts:
Text conflict in mysql-test/r/partition_innodb.result
Text conflict in sql/field.h
Text conflict in sql/item.h
Text conflict in sql/item_cmpfunc.h
Text conflict in sql/item_sum.h
Text conflict in sql/log_event_old.cc
Text conflict in sql/protocol.cc
Text conflict in sql/sql_select.cc
Text conflict in sql/sql_yacc.yy
SunStudio
SunStudio compilers of late warn about methods that might hide
methods in base classes due to the use of overloading combined
with overriding. SunStudio also warns about variables defined
in local socpe or method arguments that have the same name as
a member attribute of the class.
This patch renames methods that might hide base class methods,
to make it easier both for humans and compilers to see what is
actually called. It also renames variables in local scope.
sql/field.cc:
Local scope variable or method argument same as class
attribute.
sql/item_cmpfunc.cc:
Local scope variable or method argument same as class
attribute.
sql/item_create.cc:
Renaming base class create() to create_func().
sql/item_create.h:
Renaming base class create() to create_func().
sql/protocol.cc:
Local scope variable or method argument same as class
attribute.
sql/sql_profile.cc:
Local scope variable or method argument same as class
attribute.
sql/sql_select.cc:
Local scope variable or method argument same as class
attribute.
sql/sql_yacc.yy:
Renaming base class create() to create_func().
storage/federated/ha_federated.cc:
Local scope variable or method argument same as class
attribute.
storage/myisammrg/ha_myisammrg.cc:
Local scope variable or method argument same as class
attribute.
Extend and implement the grammar that allows to FLUSH WITH READ LOCK
a list of tables, rather than all of them.
Incompatible grammar change:
Previously one could perform FLUSH TABLES, HOSTS, PRIVILEGES in a single
statement.
After this change, FLUSH TABLES must always be alone on the list.
Judging by the test suite, however, the old extended syntax
was never or very rarely used.
The new statement requires RELOAD ACL global privilege and
LOCK_TABLES_ACL | SELECT_ACL on individual tables.
In other words, it's an atomic combination of LOCK TALBES <list> READ
and FLUSH TABLES <list>, and requires respective privileges.
For additional information about the semantics, please
see WL#5000 and the comment for flush_tables_with_read_lock()
function in sql_parse.cc
mysql-test/r/flush.result:
Update test results (WL#5000).
mysql-test/t/flush.test:
Add test coverage for WL#5000.
sql/sql_yacc.yy:
Allow FLUSH TABLES <table_list> WITH READ LOCK.
Disallow FLUSH TABLES <table_list>, flush_options.
"TYPE=storage_engine" is deprecated, and will be removed
in the Celosia release of MySQL. Since the option is
present in the Betony release and the version number of
Celosia is still not decided, we need to bump the
deprecation version number back up to "6.0".
The task is to
(a) add a comment on indexes and
(b) increase the maximum length of column, table and the new index comments.
The patch committed on behalf of Yoshinori Matsunobu (Yoshinori.Matsunobu@Sun.COM).
A set of program options and variables was deprecated in
MySQL 5.1, and is hereby removed.
client/mysql.cc:
--no-auto-rehash (-A) is no longer deprecated
--no-named-commands (-g) is now removed
--skip-line-numbers (-L) is no longer deprecated
--set-variable (-O) is now removed
--no-pager is now removed
client/mysqlbinlog.cc:
--position is now removed (use --start-position)
-j is now equivalent with --start-position
client/mysqldump.c:
--first-slave is now removed
--no-set-names (-N) is now removed
--set-variable (-O) is now removed
mysql-test/include/default_mysqld.cnf:
default-character-set is removed as an option
character-set-server is equivalent.
mysql-test/t/bug47671-master.opt:
default-character-set option is removed
character-set-server is equivalent
mysql-test/t/ctype_latin1_de-master.opt:
default-character-set option is removed
character-set-server is equivalent
mysql-test/t/ctype_ucs2_def-master.opt:
default-collation is removed
collation-server is equicalent
scripts/mysqld_multi.sh:
--config-file has been superseded by
--defaults-extra-file
sql/mysql_priv.h:
Removed the version number in the deprecation
warning text, as decided by ServerPT.
sql/mysqld.cc:
--default-character-set (-C) is removed
--default-collation is removed
--log-long-format (-0) is removed
--safe-show-database is removed
--set-variable (-O) is removed
sql/sql_yacc.yy:
The FRAC_SECOND keyword is removed
sql/sys_vars.cc:
The sql_log_update system variable is removed
Fix Bug#50555 "handler commands crash server in my_hash_first()"
as a post-merge fix (the new handler tests are not passing
otherwise).
- in hash.c, don't call calc_hash if ! my_hash_inited().
- add tests and results for the test case for Bug#50555
mysys/hash.c:
Assert that the hash is initialized when it's used.
sql/set_var.cc:
Check that the hash is initalized before using it (Bug#50555)
Original revision:
------------------------------------------------------------
revision-id: li-bing.song@sun.com-20100130124925-o6sfex42b6noyc6x
parent: joro@sun.com-20100129145427-0n79l9hnk0q43ajk
committer: <Li-Bing.Song@sun.com>
branch nick: mysql-5.1-bugteam
timestamp: Sat 2010-01-30 20:49:25 +0800
message:
Bug #48321 CURRENT_USER() incorrectly replicated for DROP/RENAME USER;
REVOKE/GRANT; ALTER EVENT.
The following statements support the CURRENT_USER() where a user is needed.
DROP USER
RENAME USER CURRENT_USER() ...
GRANT ... TO CURRENT_USER()
REVOKE ... FROM CURRENT_USER()
ALTER DEFINER = CURRENT_USER() EVENT
but, When these statements are binlogged, CURRENT_USER() just is binlogged
as 'CURRENT_USER()', it is not expanded to the real user name. When slave
executes the log event, 'CURRENT_USER()' is expand to the user of slave
SQL thread, but SQL thread's user name always NULL. This breaks the replication.
After this patch, All above statements are rewritten when they are binlogged.
The CURRENT_USER() is expanded to the real user's name and host.
------------------------------------------------------------
REVOKE/GRANT; ALTER EVENT.
The following statements support the CURRENT_USER() where a user is needed.
DROP USER
RENAME USER CURRENT_USER() ...
GRANT ... TO CURRENT_USER()
REVOKE ... FROM CURRENT_USER()
ALTER DEFINER = CURRENT_USER() EVENT
but, When these statements are binlogged, CURRENT_USER() just is binlogged
as 'CURRENT_USER()', it is not expanded to the real user name. When slave
executes the log event, 'CURRENT_USER()' is expand to the user of slave
SQL thread, but SQL thread's user name always NULL. This breaks the replication.
After this patch, All above statements are rewritten when they are binlogged.
The CURRENT_USER() is expanded to the real user's name and host.
removed in MySQL 6.0
CREATE TABLE... TYPE= returns the warning "The syntax
'TYPE=storage_engine' is deprecated and will be removed in
MySQL 6.0. Please use 'ENGINE=storage_engine' instead"
This syntax is deprecated already from version 5.4.4, so
the message has been changed.
In addition, the deprecation macro was changed to reflect
the ServerPT decision not to include version number in the
warning message.
A number of test result files have been changed as a
consequence of the change in the deprecation macro.
sql/mysql_priv.h:
see change done in sys_vars.cc
sql/mysqld.cc:
functions were defined all the time but not used if in libmysqld
sql/sql_select.cc:
const_part is unsigned, 1<<etc is signed
sql/sql_yacc.yy:
parenthesis
sql/sys_vars.cc:
offsetof() gives warning for non-POD types, but it's said to be safe if the type only has a constructor (see definition
of my_offsetof() for more info).
Several items said to be deprecated in the 4.1 manual
have never been removed. This worklog adds deprecation
warnings when these items are used, and warns the user
that the items will be removed in MySQL 5.6.
A couple of previously deprecation decision have been
reversed (see single file comments)
client/client_priv.h:
Macro similar to the one in the server (mysql_priv.h)
for printing a deprecation warning message
client/mysql.cc:
no-auto-rehash will not be deprecated
skip-line-numbers will not be deprecated
skip-column-names will not be deprecated
no-pager is deprecated
set-variable is deprecated
no-named-commands is deprecated
client/mysqladmin.cc:
set-variable is deprecated
client/mysqlbinlog.cc:
position is deprecated
client/mysqldump.c:
first-slave is deprecated
no-set-names is deprecated
set-variable is deprecated
mysql-test/r/mysqlbinlog.result:
Adding the [Warning] to the test case, just to show that the
deprecation works.
The test case will be changed in Celosia to use --start-position.
mysys/my_getopt.c:
set-variable (include -O) is deprecated
scripts/mysqld_multi.sh:
Warning for mysqld_multi
sql/mysqld.cc:
default-collation is deprecated
log-bin-trust-routine-creators is deprecated
set-variable is deprecated
default-character-set is deprecated
safe-show-database is deprecated
sql/share/errmsg.txt:
Added version number for sql_log_update deprecation message.
Fixed bug in locking by triggers found by test case when compiling without query cache
configure.in:
Fixed that we use same flags when testing for assembler as by makefiles.
sql/sql_yacc.yy:
Fixed bug in locking by triggers found by test case when compiling without query cache
The idea should be that triggers uses the same lock method (low_priority_locks...) as main tables.
- Marked a couple of tests with --big
- Fixed xtradb/handler/ha_innodb.cc to call explain_filename()
storage/xtradb/handler/ha_innodb.cc:
Call explain_filename() to get proper names for partitioned tables
Conflicts:
Text conflict in .bzr-mysql/default.conf
Text conflict in mysql-test/extra/rpl_tests/rpl_loaddata.test
Text conflict in mysql-test/r/mysqlbinlog2.result
Text conflict in mysql-test/suite/binlog/r/binlog_stm_mix_innodb_myisam.result
Text conflict in mysql-test/suite/binlog/r/binlog_unsafe.result
Text conflict in mysql-test/suite/rpl/r/rpl_insert_id.result
Text conflict in mysql-test/suite/rpl/r/rpl_loaddata.result
Text conflict in mysql-test/suite/rpl/r/rpl_stm_auto_increment_bug33029.result
Text conflict in mysql-test/suite/rpl/r/rpl_udf.result
Text conflict in mysql-test/suite/rpl/t/rpl_slow_query_log.test
Text conflict in sql/field.h
Text conflict in sql/log.cc
Text conflict in sql/log_event.cc
Text conflict in sql/log_event_old.cc
Text conflict in sql/mysql_priv.h
Text conflict in sql/share/errmsg.txt
Text conflict in sql/sp.cc
Text conflict in sql/sql_acl.cc
Text conflict in sql/sql_base.cc
Text conflict in sql/sql_class.h
Text conflict in sql/sql_db.cc
Text conflict in sql/sql_delete.cc
Text conflict in sql/sql_insert.cc
Text conflict in sql/sql_lex.cc
Text conflict in sql/sql_lex.h
Text conflict in sql/sql_load.cc
Text conflict in sql/sql_table.cc
Text conflict in sql/sql_update.cc
Text conflict in sql/sql_view.cc
Conflict adding files to storage/innobase. Created directory.
Conflict because storage/innobase is not versioned, but has versioned children. Versioned directory.
Conflict adding file storage/innobase. Moved existing file to storage/innobase.moved.
Conflict adding files to storage/innobase/handler. Created directory.
Conflict because storage/innobase/handler is not versioned, but has versioned children. Versioned directory.
Contents conflict in storage/innobase/handler/ha_innodb.cc
Bug#16565 mysqld --help --verbose does not order variablesBug#20413 sql_slave_skip_counter is not shown in show variables
Bug#20415 Output of mysqld --help --verbose is incomplete
Bug#25430 variable not found in SELECT @@global.ft_max_word_len;
Bug#32902 plugin variables don't know their names
Bug#34599 MySQLD Option and Variable Reference need to be consistent in formatting!
Bug#34829 No default value for variable and setting default does not raise error
Bug#34834 ? Is accepted as a valid sql mode
Bug#34878 Few variables have default value according to documentation but error occurs
Bug#34883 ft_boolean_syntax cant be assigned from user variable to global var.
Bug#37187 `INFORMATION_SCHEMA`.`GLOBAL_VARIABLES`: inconsistent status
Bug#40988 log_output_basic.test succeeded though syntactically false.
Bug#41010 enum-style command-line options are not honoured (maria.maria-recover fails)
Bug#42103 Setting key_buffer_size to a negative value may lead to very large allocations
Bug#44691 Some plugins configured as MYSQL_PLUGIN_MANDATORY in can be disabled
Bug#44797 plugins w/o command-line options have no disabling option in --help
Bug#46314 string system variables don't support expressions
Bug#46470 sys_vars.max_binlog_cache_size_basic_32 is broken
Bug#46586 When using the plugin interface the type "set" for options caused a crash.
Bug#47212 Crash in DBUG_PRINT in mysqltest.cc when trying to print octal number
Bug#48758 mysqltest crashes on sys_vars.collation_server_basic in gcov builds
Bug#49417 some complaints about mysqld --help --verbose output
Bug#49540 DEFAULT value of binlog_format isn't the default value
Bug#49640 ambiguous option '--skip-skip-myisam' (double skip prefix)
Bug#49644 init_connect and \0
Bug#49645 init_slave and multi-byte characters
Bug#49646 mysql --show-warnings crashes when server dies
CMakeLists.txt:
Bug#44691 Some plugins configured as MYSQL_PLUGIN_MANDATORY in can be disabled
client/mysql.cc:
don't crash with --show-warnings when mysqld dies
config/ac-macros/plugins.m4:
Bug#44691 Some plugins configured as MYSQL_PLUGIN_MANDATORY in can be disabled
include/my_getopt.h:
comments
include/my_pthread.h:
fix double #define
mysql-test/mysql-test-run.pl:
run sys_vars suite by default
properly recognize envirinment variables (e.g. MTR_MAX_SAVE_CORE) set to 0
escape gdb command line arguments
mysql-test/suite/sys_vars/r/rpl_init_slave_func.result:
init_slave+utf8 bug
mysql-test/suite/sys_vars/t/rpl_init_slave_func.test:
init_slave+utf8 bug
mysys/my_getopt.c:
Bug#34599 MySQLD Option and Variable Reference need to be consistent in formatting!
Bug#46586 When using the plugin interface the type "set" for options caused a crash.
Bug#49640 ambiguous option '--skip-skip-myisam' (double skip prefix)
mysys/typelib.c:
support for flagset
sql/ha_ndbcluster.cc:
backport from telco tree
sql/item_func.cc:
Bug#49644 init_connect and \0
Bug#49645 init_slave and multi-byte characters
sql/sql_builtin.cc.in:
Bug#44691 Some plugins configured as MYSQL_PLUGIN_MANDATORY in can be disabled
sql/sql_plugin.cc:
Bug#44691 Some plugins configured as MYSQL_PLUGIN_MANDATORY in can be disabled
Bug#32902 plugin variables don't know their names
Bug#44797 plugins w/o command-line options have no disabling option in --help
sql/sys_vars.cc:
all server variables are defined here
storage/myisam/ft_parser.c:
remove unnecessary updates of param->quot
storage/myisam/ha_myisam.cc:
myisam_* variables belong here
strings/my_vsnprintf.c:
%o and %llx
unittest/mysys/my_vsnprintf-t.c:
%o and %llx tests
vio/viosocket.c:
bugfix: fix @@wait_timeout to work with socket timeouts (vs. alarm thread)
timestamp primary key
Since TIMESTAMP values are adjusted by the current time zone
settings in both numeric and string contexts, using any
expressions involving TIMESTAMP values as a
(sub)partitioning function leads to undeterministic behavior of
partitioned tables. The effect may vary depending on a storage
engine, it can be either incorrect data being retrieved or
stored, or an assertion failure. The root cause of this is the
fact that the calculated partition ID may differ from a
previously calculated ID for the same data due to timezone
adjustments of the partitioning expression value.
Fixed by disabling any expressions involving TIMESTAMP values
to be used in partitioning functions with the follwing two
exceptions:
1. Creating or altering into a partitioned table that violates
the above rule is not allowed, but opening existing such tables
results in a warning rather than an error so that such tables
could be fixed.
2. UNIX_TIMESTAMP() is the only way to get a
timezone-independent value from a TIMESTAMP column, because it
returns the internal representation (a time_t value) of a
TIMESTAMP argument verbatim. So UNIX_TIMESTAMP(timestamp_column)
is allowed and should be used to fix existing tables if one
wants to use TIMESTAMP columns with partitioning.
mysql-test/r/partition_bug18198.result:
Corrected the error.
mysql-test/r/partition_error.result:
Corrected error texts.
Added test cases for bug #42849.
mysql-test/t/partition_bug18198.test:
Corrected error code.
mysql-test/t/partition_error.test:
Corrected error codes.
Added test cases for bug #42849.
sql/item.h:
Added is_timezone_dependent_processor() to Item.
sql/item_func.h:
Added has_timestamp_args() and the implementation of
is_timezone_dependent_processor() for Item_func.
sql/item_timefunc.h:
Added is_timezone_dependent_processor() to
Item_func_unix_timestamp.
sql/share/errmsg.txt:
Renamed ER_CONST_EXPR_IN_PARTITION_FUNC_ERROR to
ER_WRONG_EXPR_IN_PARTITION_FUNC_ERROR to better reflect the
meaning. Adjusted the error message.
sql/sql_partition.cc:
Modified fix_fields_part_func() to walk through partitioning
expression tree with is_timezone_dependent_processor() and issue
a warning/error if it depends on the timezone settings.
Changed fix_fields_part_func() to a static function since it is
not used anywhere except sql_partition.cc
sql/sql_partition.h:
Removed the unneeded declaration of fix_fields_part_func()
since it is now a static function.
sql/sql_yacc.yy:
ER_CONST_EXPR_IN_PARTITION_FUNC_ERROR ->
ER_WRONG_EXPR_IN_PARTITION_FUNC_ERROR.
Bug#42546 Backup: RESTORE fails, thinking it finds an existing table
The problem occured when a MDL locking conflict happened for a non-existent
table between a CREATE and a INSERT statement. The code for CREATE
interpreted this lock conflict to mean that the table existed,
which meant that the statement failed when it should not have.
The problem could occur for CREATE TABLE, CREATE TABLE LIKE and
ALTER TABLE RENAME.
This patch fixes the problem for CREATE TABLE and CREATE TABLE LIKE.
It is based on code backported from the mysql-6.1-fk tree written
by Dmitry Lenev. CREATE now uses normal open_and_lock_tables() code
to acquire exclusive locks. This means that for the test case in the bug
description, CREATE will wait until INSERT completes so that it can
get the exclusive lock. This resolves the reported bug.
The patch also prohibits CREATE TABLE and CREATE TABLE LIKE under
LOCK TABLES. Note that this is an incompatible change and must
be reflected in the documentation. Affected test cases have been
updated.
mdl_sync.test contains tests for CREATE TABLE and CREATE TABLE LIKE.
Fixing the issue for ALTER TABLE RENAME is beyond the scope of this
patch. ALTER TABLE cannot be prohibited from working under LOCK TABLES
as this could seriously impact customers and a proper fix would require
a significant rewrite.
SPATIAL and FULLTEXT indexes don't support algorithm
selection.
Disabled by creating a special grammar rule for these
in the parser.
Added some encasulation of duplicate parser code.
------------------------------------------------------------
revno: 2617.68.25
committer: Dmitry Lenev <dlenev@mysql.com>
branch nick: mysql-next-bg-pre2-2
timestamp: Wed 2009-09-16 18:26:50 +0400
message:
Follow-up for one of pre-requisite patches for fixing bug #30977
"Concurrent statement using stored function and DROP FUNCTION
breaks SBR".
Made enum_mdl_namespace enum part of MDL_key class and removed MDL_
prefix from the names of enum members. In order to do the latter
changed name of PROCEDURE symbol to PROCEDURE_SYM (otherwise macro
which was automatically generated for this symbol conflicted with
MDL_key::PROCEDURE enum member).
----------------------------------------------------------
revno: 2617.69.24
committer: Konstantin Osipov <kostja@sun.com>
branch nick: 5.4-42546
timestamp: Fri 2009-08-14 19:22:05 +0400
message:
A pre-requisite for a fix for Bug#42546 "Backup: RESTORE fails, thinking it
finds an existing table"
Back-port from WL 148 "Foreign keys" feature tree a patch
that introduced Prelocking_strategy class -- a way to parameterize
open_tables() behaviour, implemented by Dmitry Lenev.
(Part of WL#4284).
sql/sql_base.cc:
Implement different prelocking strategies. Use an instance of
prelocking_strategy in open_tables().
sql/sql_class.h:
Add declarations for class Prelocking_strategy.
sql/sql_lex.h:
Add a helper method to access last table of the global table list
(lex->query_tables).
sql/sql_parse.cc:
Use a special prelocking strategy when locking tables for LOCK TABLES.
sql/sql_table.cc:
Use normal open_and_lock_tables_derived() in ALTER TABLE.
sql/sql_yacc.yy:
Modify the grammar to not pollute the global table list with tables
that should not be opened.
Support for flushing individual logs, so that the user can
selectively flush a subset of the server logs.
Flush of individual logs is done according to the
following syntax:
FLUSH <log_category> LOGS;
The syntax is extended so that the user is able to flush a
subset of logs:
FLUSH [log_category LOGS,];
where log_category is one of:
SLOW
ERROR
BINARY
ENGINE
GENERAL
RELAY.
mysql-test/suite/rpl/r/rpl_flush_logs.result:
Test result for WL#5142.
mysql-test/suite/rpl/t/rpl_flush_logs.test:
Added the test file to verify if the 'flush individual log'
statement works fine.
sql/log.cc:
Added the two functions to flush slow and general log.
sql/sql_parse.cc:
Added code to flush specified logs against the option.
sql/sql_yacc.yy:
Added code to parse the 'flush * log' statement syntax and
set its option to Lex->type.
Text conflict in mysql-test/collections/default.experimental
Text conflict in mysql-test/r/show_check.result
Text conflict in mysql-test/r/sp-code.result
Text conflict in mysql-test/suite/binlog/r/binlog_tmp_table.result
Text conflict in mysql-test/suite/rpl/t/disabled.def
Text conflict in mysql-test/t/show_check.test
Text conflict in mysys/my_delete.c
Text conflict in sql/item.h
Text conflict in sql/item_cmpfunc.h
Text conflict in sql/log.cc
Text conflict in sql/mysqld.cc
Text conflict in sql/repl_failsafe.cc
Text conflict in sql/slave.cc
Text conflict in sql/sql_parse.cc
Text conflict in sql/sql_table.cc
Text conflict in sql/sql_yacc.yy
Text conflict in storage/myisam/ha_myisam.cc
Corrected results for
stm_auto_increment_bug33029.reject 2009-12-01
20:01:49.000000000 +0300
<andrei> @@ -42,9 +42,6 @@
<andrei> RETURN i;
<andrei> END//
<andrei> CALL p1();
<andrei> -Warnings:
<andrei> -Note 1592 Statement may not be safe to log in statement
format.
<andrei> -Note 1592 Statement may not be safe to log in statement
format.
There should be indeed no Note present because there is in fact autoincrement
top-level query in sp() that triggers inserting in yet another auto-inc table.
(todo: alert DaoGang to improve the test).
mysql-test/r/log_tables.result:
Bug #35765 ALTER TABLE produces wrong error when non-existent storage engine used
Updated result
mysql-test/r/partition.result:
Bug #35765 ALTER TABLE produces wrong error when non-existent storage engine used
Updated result
mysql-test/r/partition_innodb.result:
Bug #35765 ALTER TABLE produces wrong error when non-existent storage engine used
Updated result
mysql-test/t/log_tables.test:
Bug #35765 ALTER TABLE produces wrong error when non-existent storage engine used
Updated test
mysql-test/t/partition.test:
Bug #35765 ALTER TABLE produces wrong error when non-existent storage engine used
Added test case
mysql-test/t/partition_innodb.test:
Bug #35765 ALTER TABLE produces wrong error when non-existent storage engine used
Updated test
sql/protocol.cc:
Bug #35765 ALTER TABLE produces wrong error when non-existent storage engine used
(fix of bug#48939 to avoid test failures on my test build).
sql/sql_yacc.yy:
Bug #35765 ALTER TABLE produces wrong error when non-existent storage engine used
if no existing engine was given, don't set HA_CREATE_USED_ENGINE
Not all my_hash_insert() calls are checked for return value.
This patch adds appropriate checks and failure responses
where needed.
mysys/hash.c:
* Debug hook for testing failures in my_hash_insert()
Problem: Some system functions that could return different values on
master and slave were not marked unsafe. In particular:
GET_LOCK
IS_FREE_LOCK
IS_USED_LOCK
MASTER_POS_WAIT
RELEASE_LOCK
SLEEP
SYSDATE
VERSION
Fix: Mark these functions unsafe.
mysql-test/extra/rpl_tests/rpl_stm_000001.test:
- The test does not work in mixed mode any more, since it tries to
simulate an error in the sql thread in a query that uses get_lock.
Since get_lock now causes the query to be logged in row format,
the error didn't happen. Hence, we now force statement mode.
- Warnings must be disabled when the unsafe query is issued.
- Replaced some save_master_pos+connection slave+sync_with_master
by sync_slave_with_master.
mysql-test/suite/binlog/r/binlog_stm_mix_innodb_myisam.result:
updated result file
mysql-test/suite/binlog/r/binlog_stm_row.result:
updated result file
mysql-test/suite/binlog/r/binlog_unsafe.result:
updated result file
mysql-test/suite/binlog/t/binlog_killed.test:
binlog_killed only works in statement format now, since
it switches to row mode in mixed mode.
mysql-test/suite/binlog/t/binlog_stm_mix_innodb_myisam.test:
suppress warnings for unsafe statements
mysql-test/suite/binlog/t/binlog_stm_row.test:
- Suppress warnings in test that causes warnings.
- The test sets binlog format explicitly, so no need to execute it
twice.
mysql-test/suite/binlog/t/binlog_unsafe.test:
Added test for all unsafe system functions. This test also includes
system functions that were unsafe prior to BUG#47995.
mysql-test/suite/rpl/r/rpl_err_ignoredtable.result:
updated result file
mysql-test/suite/rpl/r/rpl_get_lock.result:
updated result file
mysql-test/suite/rpl/r/rpl_nondeterministic_functions.result:
new result file
mysql-test/suite/rpl/r/rpl_stm_000001.result:
updated result file
mysql-test/suite/rpl/r/rpl_trigger.result:
updated result file
mysql-test/suite/rpl/t/rpl_err_ignoredtable.test:
- suppress warnings for unsafe statement
- replaced save_master_pos+connection slave+sync_with_master
with sync_slave_with_master
mysql-test/suite/rpl/t/rpl_get_lock.test:
update test case that causes new warnings
mysql-test/suite/rpl/t/rpl_nondeterministic_functions.test:
Added new test case for nondeterministic functions.
mysql-test/suite/rpl/t/rpl_trigger.test:
update test case that causes new warnings
sql/item_create.cc:
Marked some system functions unsafe.
sql/item_strfunc.cc:
Clarified comment related to this bug.
sql/sql_yacc.yy:
Marked sysdate unsafe.
- Moved some code from innodb_plugin to xtradb, to ensure that all tests runs
- Did changes in pbxt and maria storage engines becasue of changes in thd->query
- Reverted wrong code in sql_table.cc for how ROW_FORMAT is used.
This is a re-commit of Monty's merge to eliminate an extra commit from
MySQL-5.1.42 that was accidentally included in the merge.
This is a merge of the MySQL 5.1.41 clone-off (clone-5.1.41-build). In
case there are any extra changes done before final MySQL 5.1.41
release, these will need to be merged later before MariaDB 5.1.41
release.
This patch borrows ideas, text and code from Kristofer
Pettersson's patch.
An assignment of a system variable sharing the same base
name as a declared stored procedure variable in the same
context could lead to a crash.
The reason was that during the parsing of the syntactic
rule 'option_value' an uninitialized set_var object was
pushed to the parameter stack of the SET statement. The
parent rule 'option_type_value' interpreted the existence
of variables on the parameter stack as an assignment and
wrapped it in a sp_instr_set object.
As the procedure later was executed an attempt was made
to run the method 'check()' on an uninitialized member
object (NULL value) belonging to the previously created
but uninitialized object.
This patch refactors the 'internal_variable_name' rule and
copies the semantic analysis part to the depending parent
rule: 'option_value'. This makes it possible to account
for any prefixes affecting the interpretation of the
internal_variable_name.
mysql-test/r/sp.result:
Add test case result.
mysql-test/t/sp.test:
Add test case for bug.
sql/sql_yacc.yy:
- Reduce churn in rule sys_option_value by moving to
specialized functions.
- Comment the the lookup in the rule internel_variable_name
is a best effort operation.
- Lookup for a system variable in the option_value if one was
not found (the variable could have been shadowed)
------------------------------------------------------------
revno: 2476.784.4
revision-id: sp1r-davi@moksha.local-20071008114751-46069
parent: sp1r-davi@moksha.local-20071003002731-48537
committer: davi@moksha.local
timestamp: Mon 2007-10-08 08:47:51 -0300
message:
Bug#27249 table_wild with alias: select t1.* as something
Aliases to table wildcards are silently ignored, but they should
not be allowed as it is non-standard and currently useless. There
is not point in having a alias to a wildcard of column names.
The solution is to rewrite the select_item rule so that aliases
for table wildcards are not accepted.
Contribution by Martin Friebe
mysql-test/r/alias.result:
Add test case result for Bug#27249
mysql-test/t/alias.test:
Add test case for Bug#27249
sql/sql_yacc.yy:
Split up select_item rule so that aliases for table wildcards
are not accepted by the parser.
------------------------------------------------------------
revno: 2572.2.1
revision-id: sp1r-davi@mysql.com/endora.local-20080227225948-16317
parent: sp1r-anozdrin/alik@quad.-20080226165712-10409
committer: davi@mysql.com/endora.local
timestamp: Wed 2008-02-27 19:59:48 -0300
message:
Bug#27525 table not found when using multi-table-deletes with aliases over several databas
Bug#30234 Unexpected behavior using DELETE with AS and USING
The multi-delete statement has a documented limitation that
cross-database multiple-table deletes using aliases are not
supported because it fails to find the tables by alias if it
belongs to a different database. The problem is that when
building the list of tables to delete from, if a database
name is not specified (maybe an alias) it defaults to the
name of the current selected database, making impossible to
to properly resolve tables by alias later. Another problem
is a inconsistency of the multiple table delete syntax that
permits ambiguities in a delete statement (aliases that refer
to multiple different tables or vice-versa).
The first step for a solution and proper implementation of
the cross-databse multiple table delete is to get rid of any
ambiguities in a multiple table statement. Currently, the parser
is accepting multiple table delete statements that have no obvious
meaning, such as:
DELETE a1 FROM db1.t1 AS a1, db2.t2 AS a1;
DELETE a1 AS a1 FROM db1.t1 AS a1, db2.t2 AS a1;
The solution is to resolve the left part of a delete statement
using the right part, if the a table on right has an alias,
it must be referenced in the left using the given alias. Also,
each table on the left side must match unambiguously only one
table in the right side.
mysql-test/r/delete.result:
Add test case result for Bug#27525 and Bug#21148
mysql-test/r/derived.result:
Update error.
mysql-test/suite/rpl/r/rpl_multi_delete2.result:
Update syntax.
mysql-test/suite/rpl/t/rpl_multi_delete2.test:
Update syntax.
mysql-test/t/delete.test:
Add test case for Bug#27525 and Bug#21148
mysql-test/t/derived.test:
Update statement error, alias is properly resolved now.
sql/sql_parse.cc:
Implement new algorithm for the resolution of alias in
a multiple table delete statement.
sql/sql_yacc.yy:
Rework multi-delete parser rules to not accept table alias
for the table source list.
sql/table.h:
Add flag to signal that the table has a alias set or
that fully qualified table name was given.
mysql-next-mr-bugfixing.
Bug no 32858 was fixed in two different ways in what was
then called mysql 5.1 and 6.0. The fix in 6.0 was very
different since bugfix no 33204 was present. Furthermore,
the two fixes were not compatible. Hence in order to
backport Bug#33204 to the 5.1-based mysql-next-mr-bugfixing,
it was necessary to remove the 5.1 fix of 32858 and apply
the 6.0 version of the fix.
mysql-test/r/subselect.result:
Bug#33204-backport: Test result
mysql-test/r/union.result:
Bug#33204-backport:
- Reversal of test result: bugfix no 32858 for 5.1
- Application of test result: bugfix no 32858 for 6.0
mysql-test/t/subselect.test:
Bug#33204-backport:
- Changed tests
- Test case
mysql-test/t/union.test:
Bug#33204-backport:
- Reversal of test: bugfix no 32858 for 5.1
- Application of test: bugfix no 32858 for 6.0
sql/sql_class.cc:
Bug#33204-backport: Reversal of bugfix no 32858 for 5.1
sql/sql_class.h:
Bug#33204-backport: Reversal of bugfix no 32858 for 5.1
sql/sql_yacc.yy:
Bug#33204-backport:
- Reversal of bugfix no 32858 for 5.1
- Application of bugfix no 32858 for 6.0
- Application of bugfix no 33204
# Bug#24690 Stored functions: RETURNing UTF8 strings
# do not return UTF8_UNICODE_CI collation
#
# Bug#17903: cast to char results in binary
# Regression. The character set was not being properly initialized
# for CAST() with a type like CHAR(2) BINARY, which resulted in
# incorrect results or even a server crash.
#
Backporting from mysql-6.0-codebase.
mysql-test/r/sp-ucs2.result:
mysql-test/t/sp-ucs2.test:
Adding tests
sql/mysql_priv.h:
Adding prototype
sql/sp.cc
Remember COLLATE clause for non-default collations
sql/sql_parse.cc
Adding a new helper function
sql/sql_yacc.yy
- Allow "CHARACTER SET cs COLLATE cl" in
SP parameters, RETURNS, DECLARE
- Minor reorganization for "ASCII" and "UNICODE"
related rules, to make the code more readable,
also to allow these aliases:
* "VARCHAR(10) ASCII BINARY" -> CHARACTER SET latin1 COLLATE latin1_bin
* "VARCHAR(10) BINARY ASCII" -> CHARACTER SET latin1 COLLATE latin1_bin
* "VARCHAR(10) UNICODE BINARY" -> CHARACTER SET ucs2 COLLATE ucs2_bin
* "VARCHAR(10) BINARY UNICODE" -> CHARACTER SET ucs2 COLLATE ucs2_bin
Previously these four aliases returned the error
"This version of MySQL does not yet support return value collation".
Note:
This patch allows "VARCHAR(10) CHARACTER SET cs COLLATE cl"
and the above four aliases.
"VARCHAR(10) COLLATE cl" is still not allowed
i.e. when COLLATE is given without CHARACTER SET.
If we want to support this, we need an architecture decision
which character set to use by default.
Backport for 5.5
The root cause of this bug is that the grammar for GROUP BY clauses,
when using WITH CUBE or WITH ROLLUP, cause conflicts with the grammar
for VIEW, when using WITH CHECK OPTION.
The solution is to implement two token look ahead when parsing a WITH token,
to disambiguate the non standard WITH CUBE and WITH ROLLUP syntaxes.
Patch based on code from Marc Alff and Antony Curtis
having clause...
The fix for bug 46184 was not very complete. It was not covering
views using temporary tables and multiple tables in a FROM clause.
Fixed by reverting the fix for 46184 and making a more general
check that is checking at the right execution stage and for all
of the non-supported cases.
Now PROCEDURE ANALYZE on non-top level SELECT is also forbidden.
Updated the analyse.test and subselect.test accordingly.
Backport for 5.5
In non debug builds, the statements:
- SHOW PROCEDURE CODE
- SHOW FUNCTION CODE
used to fail with a "syntax error", which is misleading.
These statements have been changed to return the following error for non
debug builds:
ERROR HY000: The 'SHOW PROCEDURE|FUNCTION CODE' feature is disabled; you
need MySQL built with '--with-debug' to have it working
For debug builds (./configure --with-debug), nothing is changed.
Item_sum::set_aggregator() may be called multiple times during query preparation.
On subsequent calls: verify that the aggregator type is the same,
and re-use the existing Aggregator.
sql/item_sum.cc:
In Item_sum::set_aggregator(): re-use existing Aggregator if already set.
Remove some friend declarations, add some accessor functions.
Cleanup some DBUG_ENTER and DBUG_RETURN code.
sql/item_sum.h:
Make some member fields private, add accessors instead.
Remove some un-necessary friend declarations.
Remove some default arguments from constructors.
sql/opt_sum.cc:
Use accessor functions in Item_sum.
sql/sql_select.cc:
Fix mis-spelled DBUG_ENTER text.
Use accessor functions in Item_sum.
sql/sql_yacc.yy:
Use explicit true/false rather than default arguments when constructing
Item_sum_xxx objects.
Conflicts
=========
Text conflict in .bzr-mysql/default.conf
Text conflict in libmysqld/CMakeLists.txt
Text conflict in libmysqld/Makefile.am
Text conflict in mysql-test/collections/default.experimental
Text conflict in mysql-test/extra/rpl_tests/rpl_row_sp006.test
Text conflict in mysql-test/suite/binlog/r/binlog_tmp_table.result
Text conflict in mysql-test/suite/rpl/r/rpl_loaddata.result
Text conflict in mysql-test/suite/rpl/r/rpl_loaddata_fatal.result
Text conflict in mysql-test/suite/rpl/r/rpl_row_create_table.result
Text conflict in mysql-test/suite/rpl/r/rpl_row_sp006_InnoDB.result
Text conflict in mysql-test/suite/rpl/r/rpl_stm_log.result
Text conflict in mysql-test/suite/rpl_ndb/r/rpl_ndb_circular_simplex.result
Text conflict in mysql-test/suite/rpl_ndb/r/rpl_ndb_sp006.result
Text conflict in mysql-test/t/mysqlbinlog.test
Text conflict in sql/CMakeLists.txt
Text conflict in sql/Makefile.am
Text conflict in sql/log_event_old.cc
Text conflict in sql/rpl_rli.cc
Text conflict in sql/slave.cc
Text conflict in sql/sql_binlog.cc
Text conflict in sql/sql_lex.h
21 conflicts encountered.
NOTE
====
mysql-5.1-rpl-merge has been made a mirror of mysql-next-mr:
- "mysql-5.1-rpl-merge$ bzr pull ../mysql-next-mr"
This is the first cset (merge/...) committed after pulling
from mysql-next-mr.
2630.39.1, 2630.28.29, 2630.34.3, 2630.34.2, 2630.34.1, 2630.29.29,
2630.29.28, 2630.31.1, 2630.28.13, 2630.28.10, 2617.23.14 and
some other minor revisions.
This patch implements:
WL#4264 "Backup: Stabilize Service Interface" -- all the
server prerequisites except si_objects.{h,cc} themselves (they can
be just copied over, when needed).
WL#4435: Support OUT-parameters in prepared statements.
(and all issues in the initial patches for these two
tasks, that were discovered in pushbuild and during testing).
Bug#39519: mysql_stmt_close() should flush all data
associated with the statement.
After execution of a prepared statement, send OUT parameters of the invoked
stored procedure, if any, to the client.
When using the binary protocol, send the parameters in an additional result
set over the wire. When using the text protocol, assign out parameters to
the user variables from the CALL(@var1, @var2, ...) specification.
The following refactoring has been made:
- Protocol::send_fields() was renamed to Protocol::send_result_set_metadata();
- A new Protocol::send_result_set_row() was introduced to incapsulate
common functionality for sending row data.
- Signature of Protocol::prepare_for_send() was changed: this operation
does not need a list of items, the number of items is fully sufficient.
The following backward incompatible changes have been made:
- CLIENT_MULTI_RESULTS is now enabled by default in the client;
- CLIENT_PS_MULTI_RESUTLS is now enabled by default in the client.
include/mysql.h:
Add a new flag to MYSQL_METHODS::flush_use_result
function pointer. This flag determines if all results
should be flushed or only the first one:
- if flush_all_results is TRUE, then cli_flush_use_result()
will read/flush all pending results. I.e. it will read
all packets while server status attribute indicates that
there are more results. This is a new semantic, required
to fix the bug.
- if flush_all_results is FALSE, the old sematic
is preserved -- i.e. cli_flush_use_result() reads data
until first EOF-packet.
include/mysql.h.pp:
Update the ABI with new calls (compatible changes).
include/mysql_com.h:
Add CLIENT_PS_OUT_PARAMS -- a client capability indicating that the client supportsю
libmysql/libmysql.c:
Add mysql_stmt_next_result() -- analogue of mysql_next_result() for binary protocol.
Fix a minor bug in alloc_fields() -- not all members were copied over,
and some only shallow-copied (catalog).
Flush all results in mysql_stmt_close() (Bug#39519).
libmysqld/lib_sql.cc:
Rename send_fields() -> send_result_set_metadata().
Refactoring: change prepare_for_send() so that it accepts only
what it really needs -- a number of elements in the list.
mysql-test/r/ps.result:
Update results: WL#4435.
mysql-test/t/ps.test:
WL#4435: A test case for an SQL-part of the problem.
sql-common/client.c:
Bug#39519.
Implement new functionality in cli_flush_use_result():
if flush_all_delete is TRUE, then it should read/flush
all pending results.
sql/Makefile.am:
Add a new header sql_prepare.h to the list
of build headers.
sql/events.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/handler.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/mysql_priv.h:
Move sql_prepare.cc-specific declarations to a new
header - sql_prepare.h.
sql/procedure.h:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/protocol.cc:
Move the logic responsible for sending of one result
set row to the Protocol class. Define a template
for end-of-statement action.
Refactoring: change prepare_for_send() so that it accepts
only what it really needs -- a number of elements in the list.
Rename send_fields() to send_result_set_metadata().
sql/protocol.h:
Update with new declarations (WL#4435).
Rename send_fields() -> send_result_set_metadata().
prepare_for_send() only needs the number of columns to send,
and doesn't use the item list - update signature to require
only what's needed.
Add a new protocol type -- Protocol_local.
sql/repl_failsafe.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/slave.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_acl.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_base.cc:
Include sql_prepare.h (for Reprepare_observer).
sql/sql_cache.cc:
Extend the query cache flags block to be able
to store a numeric id for the result format,
not just a flag binary/non-binary.
sql/sql_class.cc:
Update to use the rename of Protocol::send_fields()
to Protocol::send_result_set_metadata().
Use Protocol::send_one_result_set_row().
sql/sql_class.h:
Move the declaration of Reprepare_observer to the
new header - sql_prepare.h.
Update to the new signature of class Protocol::send_fields().
sql/sql_connect.cc:
Use a protocol template method instead of
raw NET layer API at the end of a statement.
sql/sql_cursor.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_error.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_handler.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
Use new method Protocol::send_one_result_set_row().
sql/sql_help.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_lex.cc:
Initialize multi_statements variable.
Add a handy constant for empty lex
string.
sql/sql_lex.h:
Add a separate member for a standalone
parsing option - multi-statements support.
sql/sql_list.cc:
sql_list.h is a standalone header now,
no need to include mysql_priv.h.
sql/sql_list.h:
Make sql_list.h a stand-alone header.
sql/sql_parse.cc:
Include sql_prepare.h for prepared
statements- related declarations.
Use a new Protocol template method to end
each statement (send OK, EOF or ERROR to
the client).
sql/sql_prepare.cc:
Implement Execute Direct API (WL#4264),
currently unused. It will be used by the service
interface (Backup).
Use a new header - sql_prepare.h.
Add support for OUT parameters in the
binary and text protocol (prepared statements
only).
sql/sql_prepare.h:
Add a new header to contain (for now)
all prepared statement- external
related declarations.
sql/sql_profile.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_repl.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_select.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_show.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_string.h:
Add a way to convert a String to LEX_STRING.
sql/sql_table.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_update.cc:
Remove an extraneous my_error(). The error
is already reported in update_non_unique_table_error().
sql/sql_yacc.yy:
Support for multi-statements is an independent
property of parsing, not derived from
the protocol type.
tests/mysql_client_test.c:
Add tests for WL#4435 (binary protocol).
The original code comes, as far as I know, from Google (Mark Callaghan's team) with additional work from Percona, Ourdelta and Weldon Whipple.
This code provides the same functionallity, but with a lot of changes to make it faster and better fit the MariaDB infrastucture.
Added new status variables:
- Com_show_client_statistics, Com_show_index_statistics, Com_show_table_statistics, Com_show_user_statistics
- Access_denied_errors, Busy_time (clock time), Binlog_bytes_written, Cpu_time, Empty_queries, Rows_sent, Rows_read
Added new variable / startup option 'userstat' to control if user statistics should be enabled or not
Added my_getcputime(); Returns cpu time used by this thread.
New FLUSH commands:
- FLUSH SLOW QUERY LOG
- FLUSH TABLE_STATISTICS
- FLUSH INDEX_STATISTICS
- FLUSH USER_STATISTICS
- FLUSH CLIENT_STATISTICS
New SHOW commands:
- SHOW CLIENT_STATISTICS
- SHOW USER_STATISTICS
- SHOW TABLE_STATISTICS
- SHOW INDEX_STATISTICS
New Information schemas:
- CLIENT_STATISTICS
- USER_STATISTICS
- INDEX_STATISTICS
- TABLE_STATISTICS
Added support for all new flush commands to mysqladmin
Added handler::ha_... wrappers for all handler read calls to do statistics counting
- Changed all code to use new ha_... calls
- Count number of read rows, changed rows and rows read trough an index
Added counting of number of bytes sent to binary log (status variable Binlog_bytes_written)
Added counting of access denied errors (status variable Access_denied_erors)
Bugs fixed:
- Fixed bug in add_to_status() and add_diff_to_status() where longlong variables where threated as long
- CLOCK_GETTIME was not propely working on Linuxm
client/mysqladmin.cc:
Added support for all new flush commmands and some common combinations:
flush-slow-log
flush-table-statistics
flush-index-statistics
flush-user-statistics
flush-client-statistics
flush-all-status
flush-all-statistics
configure.in:
Added checking if clock_gettime needs the librt.
(Fixes Bug #37639 clock_gettime is never used/enabled in Linux/Unix)
include/my_sys.h:
Added my_getcputime()
include/mysql_com.h:
Added LIST_PROCESS_HOST_LEN & new REFRESH target defines
mysql-test/r/information_schema.result:
New information schema tables added
mysql-test/r/information_schema_all_engines.result:
New information schema tables added
mysql-test/r/information_schema_db.result:
New information schema tables added
mysql-test/r/log_slow.result:
Added testing that flosh slow query logs is accepted
mysql-test/r/status_user.result:
Basic testing of user, client, table and index statistics
mysql-test/t/log_slow.test:
Added testing that flosh slow query logs is accepted
mysql-test/t/status_user-master.opt:
Ensure that we get a fresh restart before running status_user.test
mysql-test/t/status_user.test:
Basic testing of user, client, table and index statistics
mysys/my_getsystime.c:
Added my_getcputime()
Returns cpu time used by this thread.
sql/authors.h:
Updated authors to have core and original MySQL developers first.
sql/event_data_objects.cc:
Updated call to mysql_reset_thd_for_next_command()
sql/event_db_repository.cc:
Changed to use new ha_... calls
sql/filesort.cc:
Changed to use new ha_... calls
sql/ha_partition.cc:
Changed to use new ha_... calls
Fixed comment syntax
sql/handler.cc:
Changed to use new ha_... calls
Reset table statistics
Added code to update global table and index status
Added counting of rows changed
sql/handler.h:
Added table and index statistics variables
Added function reset_statistics()
Added handler::ha_... wrappers for all handler read calls to do statistics counting
Protected all normal read calls to ensure we use the new calls in the server.
Made ha_partition a friend class so that partition code can call the old read functions
sql/item_subselect.cc:
Changed to use new ha_... calls
sql/lex.h:
Added keywords for new information schema tables and flush commands
sql/log.cc:
Added flush_slow_log()
Added counting of number of bytes sent to binary log
Removed not needed test of thd (It's used before, so it's safe to use)
Added THD object to MYSQL_BIN_LOG::write_cache() to simplify statistics counting
sql/log.h:
Added new parameter to write_cache()
Added flush_slow_log() functions.
sql/log_event.cc:
Updated call to mysql_reset_thd_for_next_command()
Changed to use new ha_... calls
sql/log_event_old.cc:
Updated call to mysql_reset_thd_for_next_command()
Changed to use new ha_... calls
sql/mysql_priv.h:
Updated call to mysql_reset_thd_for_next_command()
Added new statistics functions and variables needed by these.
sql/mysqld.cc:
Added new statistics variables and structures to handle these
Added new status variables:
- Com_show_client_statistics, Com_show_index_statistics, Com_show_table_statistics, Com_show_user_statistics
- Access_denied_errors, Busy_time (clock time), Binlog_bytes_written, Cpu_time, Empty_queries, Rows_set, Rows_read
Added new option 'userstat' to control if user statistics should be enabled or not
sql/opt_range.cc:
Changed to use new ha_... calls
sql/opt_range.h:
Changed to use new ha_... calls
sql/opt_sum.cc:
Changed to use new ha_... calls
sql/records.cc:
Changed to use new ha_... calls
sql/set_var.cc:
Added variable 'userstat'
sql/sp.cc:
Changed to use new ha_... calls
sql/sql_acl.cc:
Changed to use new ha_... calls
Added counting of access_denied_errors
sql/sql_base.cc:
Added call to statistics functions
sql/sql_class.cc:
Added usage of org_status_var, to store status variables at start of command
Added functions THD::update_stats(), THD::update_all_stats()
Fixed bug in add_to_status() and add_diff_to_status() where longlong variables where threated as long
sql/sql_class.h:
Added new status variables to status_var
Moved variables that was not ulong in status_var last.
Added variables to THD for storing temporary values during statistics counting
sql/sql_connect.cc:
Variables and functions to calculate user and client statistics
Added counting of access_denied_errors and lost_connections
sql/sql_cursor.cc:
Changed to use new ha_... calls
sql/sql_handler.cc:
Changed to use new ha_... calls
sql/sql_help.cc:
Changed to use new ha_... calls
sql/sql_insert.cc:
Changed to use new ha_... calls
sql/sql_lex.h:
Added SQLCOM_SHOW_USER_STATS, SQLCOM_SHOW_TABLE_STATS, SQLCOM_SHOW_INDEX_STATS, SQLCOM_SHOW_CLIENT_STATS
sql/sql_parse.cc:
Added handling of:
- SHOW CLIENT_STATISTICS
- SHOW USER_STATISTICS
- SHOW TABLE_STATISTICS
- SHOW INDEX_STATISTICS
Added handling of new FLUSH commands:
- FLUSH SLOW QUERY LOGS
- FLUSH TABLE_STATISTICS
- FLUSH INDEX_STATISTICS
- FLUSH USER_STATISTICS
- FLUSH CLIENT_STATISTICS
Added THD parameter to mysql_reset_thd_for_next_command()
Added initialization and calls to user statistics functions
Added increment of statistics variables empty_queries, rows_sent and access_denied_errors.
Added counting of cpu time per query
sql/sql_plugin.cc:
Changed to use new ha_... calls
sql/sql_prepare.cc:
Updated call to mysql_reset_thd_for_next_command()
sql/sql_select.cc:
Changed to use new ha_... calls
Indentation changes
sql/sql_servers.cc:
Changed to use new ha_... calls
sql/sql_show.cc:
Added counting of access denied errors
Added function for new information schema tables:
- CLIENT_STATISTICS
- USER_STATISTICS
- INDEX_STATISTICS
- TABLE_STATISTICS
Changed to use new ha_... calls
sql/sql_table.cc:
Changed to use new ha_... calls
sql/sql_udf.cc:
Changed to use new ha_... calls
sql/sql_update.cc:
Changed to use new ha_... calls
sql/sql_yacc.yy:
Add new show and flush commands
sql/structs.h:
Add name_length to KEY to avoid some strlen
Added cache_name to KEY for fast storage of keyvalue in cache
Added structs USER_STATS, TABLE_STATS, INDEX_STATS
Added function prototypes for statistics functions
sql/table.cc:
Store db+table+index name into keyinfo->cache_name
sql/table.h:
Added new information schema tables
sql/tztime.cc:
Changed to use new ha_... calls
Adding @@session and @@global prefixes to a
declared variable in a stored procedure the server
would lead to a crash.
The reason was that during the parsing of the
syntactic rule 'option_value' an uninitialized
set_var object was pushed to the parameter stack
of the SET statement. The parent rule
'option_type_value' interpreted the existence of
variables on the parameter stack as an assignment
and wrapped it in a sp_instr_set object.
As the procedure later was executed an attempt
was made to run the method 'check()' on an
uninitialized member object (NULL value) belonging
to the previously created but uninitialized object.
sql/sql_yacc.yy:
* Assign the option_type at once since it is needed by the next
parsing rule (internal_variable_name)
* Rearranged the if statement to reduce negations and gain more
clarity of code.
* Added check for option_type to better detect if current
variable is a SP local variable or a system variable.
Implemented the server infrastructure for the fix:
1. Added a function LEX_STRING *thd_query_string(THD) to return
a LEX_STRING structure instead of char *.
This is the function that must be called in innodb instead of
thd_query()
2. Did some encapsulation in THD : aggregated thd_query and
thd_query_length into a LEX_STRING and made accessor and mutator
methods for easy code updating.
3. Updated the server code to use the new methods where applicable.
mysql-test/r/loadxml.result
mysql-test/t/loadxml.test
Fixing non-deterministic test results
sql/sql_yacc.yy
Initializing fname_first using get_tok_end() instead of get_ptr().
The latter is grammar-dependant. The former is not.
----------------------------------------------------------
revno: 2630.22.8
committer: Konstantin Osipov <konstantin@mysql.com>
branch nick: mysql-6.0-runtime
timestamp: Sun 2008-08-10 18:49:52 +0400
message:
Get rid of typedef struct for the most commonly used types:
TABLE, TABLE_SHARE, LEX. This simplifies use of tags
and forward declarations.
Original revision in 6.0:
------------------------------------------------------------
revno: 2630.13.11
committer: Alexander Nozdrin <alik@mysql.com>
branch nick: 6.0-rt-wl4300
timestamp: Thu 2008-07-24 11:44:21 +0400
message:
A patch for WL#4300: Define privileges for tablespaces.
------------------------------------------------------------
per-file messages:
mysql-test/r/grant.result
Update result file: new columm 'Create_tablespace_priv' has been added to mysql.user.
mysql-test/r/ps.result
Update result file: new columm 'Create_tablespace_priv' has been added to mysql.user.
mysql-test/r/system_mysql_db.result
Update result file: new columm 'Create_tablespace_priv' has been added to mysql.user.
mysql-test/suite/falcon/r/falcon_tablespace_priv.result
Test case for WL#4300.
mysql-test/suite/falcon/t/falcon_tablespace_priv.test
Test case for WL#4300.
mysql-test/suite/ndb/r/ndb_dd_ddl.result
Test case for WL#4300.
mysql-test/suite/ndb/t/ndb_dd_ddl.test
Test case for WL#4300.
scripts/mysql_system_tables.sql
New columm 'Create_tablespace_priv' has been added to mysql.user.
scripts/mysql_system_tables_data.sql
'CREATE TABLESPACE' is granted by default to the root user.
scripts/mysql_system_tables_fix.sql
Grant 'CREATE TABLESPACE' privilege during system table upgrade
if a user had SUPER privilege.
sql/sql_acl.cc
Added CREATE TABLESPACE privilege.
sql/sql_acl.h
Added CREATE TABLESPACE privilege.
sql/sql_parse.cc
Check global 'CREATE TABLESPACE' privilege for the following SQL statements:
- CREATE | ALTER | DROP TABLESPACE
- CREATE | ALTER | DROP LOGFILE GROUP
sql/sql_show.cc
Added CREATE TABLESPACE privilege.
sql/sql_yacc.yy
Added CREATE TABLESPACE privilege.
storing and restoring information about foreign keys in the .FRM files and
properly displaying it in SHOW CREATE TABLE output and I_S tables.
The idea of this patch is to change type of Key_part_spec::field_name and
Key::name to LEX_STRING in order to avoid extra strlen() calls during
semantic analysis and statement execution, particularly, in code to be
implemented on the 2nd milestone of WL#148.
Note that since we are not using LEX_STRING everywhere yet (e.g. in
Create_field and KEY) and we want to limit scope of our changes we
have to do strlen() in places where we create Key and Key_part_spec
instances from objects using plain (char*) for strings. These calls
will go away during the process of further (char*) -> LEX_STRING
refactoring.
We have introduced these changes in 6.0 and backported them to 5.5
tree to make people aware of these changes as early as possible and
to simplify merges with mysql-fk and mysql-6.1-fk trees.
No test case is needed since this patch does not introduce any
user visible changes.
sql/sql_class.cc:
Key_part_spec::field_name is now LEX_STRING. Adjusted code accordingly.
sql/sql_class.h:
Changed type of Key_part_spec::field_name and Key::name to LEX_STRING in
order to avoid extra strlen() calls in code responsible for semantic
analysis and statement execution (e.g. in future code responsible for
saving/restoring info about foreign keys).
sql/sql_lex.cc:
Moved null_lex_str from sql_yacc.yy to sql_lex.cc and added its
declaration to sql_lex.h to make it accessible in other SQL-layer
modules (e.g. sql_parse.cc).
sql/sql_lex.h:
Made null_lex_str accessible from outside of sql_lex.cc.
sql/sql_parse.cc:
Key_part_spec::field_name and Key::name are now LEX_STRING. Adjusted
code accordingly.
sql/sql_table.cc:
Adjusted code to accomodate change of type to LEX_STRING for
Key_part_spec::field_name and Key::name.
sql/sql_yacc.yy:
Now Key::name and Key_part_spec::field_name are LEX_STRINGs. Adjusted
grammar to be able properly initialize them. This should allow us to
save on some strlen() calls during later stages of statement execution.
'flush tables' crashes
The server crashes when 'show procedure status' and 'flush tables' are
run concurrently.
This is caused by the way mysql.proc table is added twice to the list
of table to lock although the requirements on the current locking API
assumes differently.
No test case is submitted because of the nature of the crash which is
currently difficult to reproduce in a deterministic way.
This is a backport from 5.1
myisam/mi_dbug.c:
* check_table_is_closed is only used in EXTRA_DEBUG mode but since it is
iterating over myisam shared data it still needs to be protected by an
appropriate mutex.
sql/sql_yacc.yy:
* Since the I_S mechanism is already handling the open and close of
mysql.proc there is no need for the method sp_add_to_query_tables.
replication
MySQL server uses wrong lock type (always TL_READ instead of
TL_READ_NO_INSERT when appropriate) for tables used in
subqueries of UPDATE statement. This leads in some cases to
a broken replication as statements are written in the wrong
order to the binlog.
sql/sql_yacc.yy:
* Set lock_option to either TL_READ_NO_INSERT or
TL_READ for any sub-SELECT following UPDATE.
* Changed line adjusted for parser identation
rules; code begins at column 13.
files
NOTE: this is the backport to next-mr.
SHOW BINLOG EVENTS does not work with relay log files. If issuing
"SHOW BINLOG EVENTS IN 'relay-log.000001'" in a non-empty relay
log file (relay-log.000001), mysql reports empty set.
This patch addresses this issue by extending the SHOW command
with RELAYLOG. Events in relay log files can now be inspected by
issuing SHOW RELAYLOG EVENTS [IN 'log_name'] [FROM pos] [LIMIT
[offset,] row_count].
mysql-test/extra/rpl_tests/rpl_show_relaylog_events.inc:
Shared part of the test case.
mysql-test/include/show_binlog_events.inc:
Added options $binary_log_file, $binary_log_limit_row,
$binary_log_limit_offset so that show_binlog_events can take
same parameters as SHOW BINLOG EVENTS does.
mysql-test/include/show_relaylog_events.inc:
Clone of show_binlog_events for relaylog events.
mysql-test/suite/rpl/t/rpl_row_show_relaylog_events.test:
Test case for row based replication.
mysql-test/suite/rpl/t/rpl_stm_mix_show_relaylog_events.test:
Test case for statement and mixed mode replication.
sql/lex.h:
Added RELAYLOG symbol.
sql/mysqld.cc:
Added "show_relaylog_events" to status_vars.
sql/sp_head.cc:
Set SQLCOM_SHOW_RELAYLOG_EVENTS to return flags=
sp_head::MULTI_RESULTS; in sp_get_flags_for_command as
SQLCOM_SHOW_BINLOG_EVENTS does.
sql/sql_lex.h:
Added sql_command SQLCOM_SHOW_RELAYLOG_EVENTS to lex enum_sql_command.
sql/sql_parse.cc:
Added handling of SQLCOM_SHOW_RELAYLOG_EVENTS.
sql/sql_repl.cc:
mysql_show_binlog_events set to choose the log file to use based on
the command issued (SHOW BINLOG|RELAYLOG EVENTS).
sql/sql_yacc.yy:
Added RELAYLOG to the grammar.
"load data" statements were written to the binlog as a mix of the original statement
and bits recreated from parse-info. This relied on implementation details and broke
with IGNORE_SPACES and versioned comments.
We now completely resynthesize the query for LOAD DATA for binlog (which among other
things normalizes them somewhat with regard to case, spaces, etc.).
We have already parsed the query properly, so we make use of that rather
than mix-and-match string literals and parsed items.
This should make us safe with regard to versioned comments, even those
spanning multiple tokens. Also no longer affected by IGNORE_SPACES.
mysql-test/r/mysqlbinlog.result:
LOAD DATA INFILE normalized
mysql-test/suite/binlog/r/binlog_killed_simulate.result:
LOAD DATA INFILE normalized
mysql-test/suite/binlog/r/binlog_row_mix_innodb_myisam.result:
LOAD DATA INFILE normalized
mysql-test/suite/binlog/r/binlog_stm_blackhole.result:
LOAD DATA INFILE normalized
mysql-test/suite/binlog/r/binlog_stm_mix_innodb_myisam.result:
LOAD DATA INFILE normalized
mysql-test/suite/rpl/r/rpl_innodb_mixed_dml.result:
LOAD DATA INFILE normalized
mysql-test/suite/rpl/r/rpl_loaddata.result:
LOAD DATA INFILE normalized
mysql-test/suite/rpl/r/rpl_loaddata_fatal.result:
LOAD DATA INFILE normalized; offsets adjusted to reflect that
mysql-test/suite/rpl/r/rpl_loaddata_map.result:
LOAD DATA INFILE normalized
mysql-test/suite/rpl/r/rpl_loaddatalocal.result:
test for #43746 - trying to break LOAD DATA part of parser
mysql-test/suite/rpl/r/rpl_stm_log.result:
LOAD DATA INFILE normalized
mysql-test/suite/rpl/t/rpl_loaddatalocal.test:
try to break the LOAD DATA part of the parser (test for #43746)
mysql-test/t/mysqlbinlog.test:
LOAD DATA INFILE normalized; adjust offsets to reflect that
sql/log_event.cc:
clean up Load_log_event::print_query and friends so they don't print
excess spaces. add support for printing charset names to print_query.
sql/log_event.h:
We already have three places where we synthesize LOAD DATA queries.
Better use one of those!
sql/sql_lex.h:
When binlogging LOAD DATA statements, we make up the statement to
be logged (from the parse-info, rather than substrings of the
original query) now. Consequently, we no longer need (string-)
pointers into the original query.
sql/sql_load.cc:
Completely rewrote write_execute_load_query_log_event() to synthesize the
LOAD DATA statement wholesale, rather than piece it together from
synthesized bits and literal excerpts from the original query. This
will not only give us a nice, normalized statement (all uppercase,
no excess spaces, etc.), it will also handle comments, including
versioned comments right, which is certainly more than we can say
about the previous incarnation.
sql/sql_yacc.yy:
We're no longer assembling LOAD DATA statements from bodyparts of the
original query, so some bookkeeping in the parser can go.
* Finished Monty and Jani's merge
* Some InnoDB tests still fail (because it's old xtradb code run against
newer testsuite). They are expected to go after mergning with the latest
xtradb.
The parser rule for expressions in a udf parameter list contains
two hacks:
First, the parser input stream is read verbatim, bypassing
the lexer.
Second, the Item::name field is overwritten. If the argument to a
udf was a field, the field's name as seen by name resolution was
overwritten this way.
If the field name was quoted or escaped, it would appear as e.g. "`field`".
Fixed by not overwriting field names.
mysql-test/r/udf.result:
Bug#46259: Test result.
mysql-test/t/udf.test:
Bug#46259: Test case.
sql/sql_yacc.yy:
Bug#46259: Fix.
If an EVENT is created without the DEFINER clause set explicitly or with it set
to CURRENT_USER, the master and slaves become inconsistent. This issue stems from
the fact that in both cases, the DEFINER is set to the CURRENT_USER of the current
thread. On the master, the CURRENT_USER is the mysqld's user, while on the slave,
the CURRENT_USER is empty for the SQL Thread which is responsible for executing
the statement.
To fix the problem, we do what follows. If the definer is not set explicitly,
a DEFINER clause is added when writing the query into binlog; if 'CURRENT_USER' is
used as the DEFINER, it is replaced with the value of the current user before
writing to binlog.
mysql-test/suite/rpl/r/rpl_create_if_not_exists.result:
Updated the result file after fixing bug#44331
mysql-test/suite/rpl/r/rpl_drop_if_exists.result:
Updated the result file after fixing bug#44331
mysql-test/suite/rpl/r/rpl_events.result:
Test result of Bug#44331
mysql-test/suite/rpl/r/rpl_innodb_mixed_dml.result:
Updated the result file after fixing bug#44331
mysql-test/suite/rpl/t/rpl_events.test:
Added test to verify if the definer is consistent between master and slave
when the event is created without the DEFINER clause set explicitly or the
DEFINER is set to CURRENT_USER
sql/events.cc:
The "create_query_string" function is added to create a new query string
for removing executable comments.
sql/sql_yacc.yy:
The remember_name token was added for recording the offset of EVENT_SYM.
The crash happens because select_union object is used as result set
for queries which have derived tables.
select_union use temporary table as data storage and if
fields count exceeds 10(count of values for procedure ANALYSE())
then we get a crash on fill_record() function.
mysql-test/r/analyse.result:
test result
mysql-test/r/subselect.result:
result fix
mysql-test/t/analyse.test:
test case
mysql-test/t/subselect.test:
test fix
sql/sql_yacc.yy:
The crash happens because select_union object is used as result set
for queries which have derived tables.
select_union use temporary table as data storage and if
fields count exceeds 10(count of values for procedure ANALYSE())
then we get a crash on fill_record() function.
Removed hard-coded error messages. All messages are now in
errmsg.txt
Also renamed enumeration value BINLOG_STMT_UNSAFE_FUNCTION to
BINLOG_STMT_UNSAFE_SYSTEM_FUNCTION to make the naming consistent
with BINLOG_STMT_UNSAFE_SYSTEM_VARIABLE.
sql/item_create.cc:
Renamed BINLOG_STMT_UNSAFE_FUNCTION to
BINLOG_STMT_UNSAFE_SYSTEM_FUNCTION
sql/share/errmsg.txt:
Moved hard-coded strings from THD::issue_unsafe_warnings() to
errmsg.txt.
sql/sql_class.cc:
- Moved error messages to errmsg.txt.
- Updated comment above THD::issue_unsafe_warnings().
sql/sql_lex.h:
Renamed BINLOG_STMT_UNSAFE_FUNCTION to
BINLOG_STMT_UNSAFE_SYSTEM_FUNCTION
sql/sql_yacc.yy:
Renamed BINLOG_STMT_UNSAFE_FUNCTION to
BINLOG_STMT_UNSAFE_SYSTEM_FUNCTION
when used with --tab
1) New syntax: added CHARACTER SET clause to the
SELECT ... INTO OUTFILE (to complement the same clause in
LOAD DATA INFILE).
mysqldump is updated to use this in --tab mode.
2) ESCAPED BY/ENCLOSED BY field parameters are documented as
accepting CHAR argument, however SELECT .. INTO OUTFILE
silently ignored rests of multisymbol arguments.
For the symmetrical behavior with LOAD DATA INFILE the
server has been modified to fail with the same error:
ERROR 42000: Field separator argument is not what is
expected; check the manual
3) Current LOAD DATA INFILE recognizes field/line separators
"as is" without converting from client charset to data
file charset. So, it is supposed, that input file of
LOAD DATA INFILE consists of data in one charset and
separators in other charset. For the compatibility with
that [buggy] behaviour SELECT INTO OUTFILE implementation
has been saved "as is" too, but the new warning message
has been added:
Non-ASCII separator arguments are not fully supported
This message warns on field/line separators that contain
non-ASCII symbols.
client/mysqldump.c:
mysqldump has been updated to call SELECT ... INTO OUTFILE
statement with a charset from the --default-charset command
line parameter.
mysql-test/r/mysqldump.result:
Added test case for bug #30946.
mysql-test/r/outfile_loaddata.result:
Added test case for bug #30946.
mysql-test/t/mysqldump.test:
Added test case for bug #30946.
mysql-test/t/outfile_loaddata.test:
Added test case for bug #30946.
sql/field.cc:
String conversion code has been moved from check_string_copy_error()
to convert_to_printable() for reuse.
sql/share/errmsg.txt:
New WARN_NON_ASCII_SEPARATOR_NOT_IMPLEMENTED message has been added.
sql/sql_class.cc:
The select_export::prepare() method has been modified to:
1) raise the ER_WRONG_FIELD_TERMINATORS error on multisymbol
ENCLOSED BY/ESCAPED BY field arguments like LOAD DATA INFILE;
2) warn with a new WARN_NON_ASCII_SEPARATOR_NOT_IMPLEMENTED
message on non-ASCII field or line separators.
The select_export::send_data() merhod has been modified to
convert item data to output charset (see new SELECT INTO OUTFILE
syntax). By default the BINARY charset is used for backward
compatibility.
sql/sql_class.h:
The select_export::write_cs field added to keep output
charset.
sql/sql_load.cc:
mysql_load has been modified to warn on non-ASCII field or
line separators with a new WARN_NON_ASCII_SEPARATOR_NOT_IMPLEMENTED
message.
sql/sql_string.cc:
New global function has been added: convert_to_printable()
(common code has been moved from check_string_copy_error()).
sql/sql_string.h:
New String::is_ascii() method and new global convert_to_printable()
function have been added.
sql/sql_yacc.yy:
New syntax: added CHARACTER SET clause to the
SELECT ... INTO OUTFILE (to complement the same clause in
LOAD DATA INFILE). By default the BINARY charset is used for
backward compatibility.
those keywords do nothing in 5.1 (they are meant for future versions, for example featuring the Maria engine)
so they are here removed from the syntax. Adding those keywords to future versions when needed is:
- WL#5034 "Add TRANSACTIONA=0|1 and PAGE_CHECKSUM=0|1 clauses to CREATE TABLE"
- WL#5037 "New ROW_FORMAT value for CREATE TABLE: PAGE"
mysql-test/r/create.result:
test that syntax is not accepted
mysql-test/t/create.test:
test that syntax is not accepted
sql/handler.cc:
remove ROW_FORMAT=PAGE
sql/handler.h:
Mark unused objects, but I don't remove them by fear of breaking any plugin which includes this file
(see also table.h)
sql/lex.h:
removing syntax
sql/sql_show.cc:
removing output of noise keywords in SHOW CREATE TABLE and INFORMATION_SCHEMA.TABLES
sql/sql_table.cc:
removing TRANSACTIONAL
sql/sql_yacc.yy:
removing syntax
sql/table.cc:
removing TRANSACTIONAL, PAGE_CHECKSUM. Their place in the frm file is not reclaimed,
for compatibility with older 5.1.
sql/table.h:
Mark unused objects, but I don't remove them by fear of breaking any plugin which includes this file
(and there are several engines which use the content TABLE_SHARE and thus rely on a certain binary
layout of this structure).
This is a post-push fix addressing review requests and
problems with extra warnings.
Problem 1: The sub-statement where an unsafe warning was detected was
printed as part of the warning. This was ok for statements that
were unsafe due to, e.g., calls to UUID(), but did not make
sense for statements that were unsafe because there was more than
one autoincrement column (unsafeness in this case comes from the
combination of several sub-statements).
Fix 1: Instead of printing the sub-statement, print an explanation
of why the statement is unsafe.
Problem 2:
When a recursive construct (i.e., stored proceure, stored
function, trigger, view, prepared statement) contained several
sub-statements, and at least one of them was unsafe, there would be
one unsafeness warning per sub-statement - even for safe
sub-statements.
Fix 2:
Ensure that each type of warning is printed at most once, by
remembering throughout the execution of the statement which types
of warnings have been printed.
mysql-test/extra/rpl_tests/create_recursive_construct.inc:
- Clarified comment per review request.
- Added checks for the number of warnings in each invocation.
mysql-test/extra/rpl_tests/rpl_insert_delayed.test:
Per review request, replaced @@session.binlog_format by
@@global.binlog_format, since INSERT DELAYED reads the global
variable. (In this test case, the two variables have the same
value, so the change is cosmetic.)
mysql-test/r/sp_trans.result:
updated result file
mysql-test/suite/binlog/r/binlog_statement_insert_delayed.result:
updated result file
mysql-test/suite/binlog/r/binlog_stm_ps.result:
updated result file
mysql-test/suite/binlog/r/binlog_stm_unsafe_warning.result:
updated result file
mysql-test/suite/binlog/r/binlog_unsafe.result:
Updated result file. Note that duplicate warnings are now gone.
mysql-test/suite/binlog/t/binlog_unsafe.test:
- Added tests for: (1) a statement that is unsafe in many ways;
(2) a statement that is unsafe in the same way several times.
- Use -- style to invoke mysqltest commands.
mysql-test/suite/rpl/r/rpl_stm_found_rows.result:
updated result file
mysql-test/suite/rpl/r/rpl_stm_loadfile.result:
updated result file
mysql-test/suite/rpl/t/rpl_mix_found_rows.test:
Per review request, added comment explaining what the test case
does (copied from rpl_stm_found_rows.test)
mysql-test/suite/rpl/t/rpl_stm_found_rows.test:
Clarified grammar in comment.
mysql-test/suite/rpl_ndb/r/rpl_ndb_binlog_format_errors.result:
Updated result file.
sql/item_create.cc:
Made set_stmt_unsafe take one parameter, describing the
type of unsafeness.
sql/sp_head.cc:
Added unsafe_flags field and made it hold all the unsafe flags.
sql/sp_head.h:
- Removed the BINLOG_ROW_BASED_IF_MIXED flag from m_flags.
Instead, we use the new unsafe_flags field to hold the
unsafeness state of the sp.
- Made propagate_attributes() copy all unsafe flags.
sql/sql_base.cc:
- Made LEX::set_stmt_unsafe() take an extra argument.
- Made binlog_unsafe_warning_flags store the type of unsafeness.
- Per review requests, clarified comments
- Added DBUG printouts
sql/sql_class.cc:
- Made warnings be generated in issue_warnings() and call that from
binlog_query(). Wrote issue_warnings(), which prints zero or more
warnings, avoiding to print warnings more than once per statement.
- Per review request, added @todo so that we remember to assert
correct behavior in binlog_query.
sql/sql_class.h:
- Removed BINLOG_WARNING_PRINTED
- Use [set|clear]_current_stmt_binlog_row_based() instead of
modifying the flag directly.
- added issue_unsafe_warnings() (only called from binlog_unsafe)
- Per review request, improved some documentation.
sql/sql_insert.cc:
Added extra argument to LEX::set_stmt_unsafe()
sql/sql_lex.h:
- Added enum_binlog_stmt_unsafe, listing all types of unsafe
statements.
- Per review requests, improved many comments for member
functions.
- Added [get|set]_stmt_unsafe_flags(), which return/set all the
unsafe flags for a statement.
sql/sql_parse.cc:
- Renamed binlog_warning_flags to binlog_unsafe_warning_flags.
- Per review requests, improved comment.
sql/sql_view.cc:
Made views propagate all the new unsafe flags.
sql/sql_yacc.yy:
Added parameter to set_stmt_unsafe().
storage/innobase/handler/ha_innodb.cc:
Per review requests, replaced DBUG_EXECUTE_IF() by DBUG_EVALUATE_IF().
Fixed the following problems:
1. cmake 2.6 warning because of a changed default on
how the dependencies to libraries with a specified
path are resolved.
Fixed by requiring cmake 2.6.
2. Removed an obsolete pre-NT4 hack including defining
Windows system defines to alter the behavior of windows.h.
3. Disabled warning C4065 on compiling sql_yacc.cc because
of a know incompatibility in some of the newer bison binaries.
NOTE: This undoes changes by BUG#42829 in sql_class.cc:binlog_query().
I will revert the change in a post-push fix (the binlog filter should
be checked in sql_base.cc:decide_logging_format()).
General overview:
The logic for switching to row format when binlog_format=MIXED had
numerous flaws. The underlying problem was the lack of a consistent
architecture.
General purpose of this changeset:
This changeset introduces an architecture for switching to row format
when binlog_format=MIXED. It enforces the architecture where it has
to. It leaves some bugs to be fixed later. It adds extensive tests to
verify that unsafe statements work as expected and that appropriate
errors are produced by problems with the selection of binlog format.
It was not practical to split this into smaller pieces of work.
Problem 1:
To determine the logging mode, the code has to take several parameters
into account (namely: (1) the value of binlog_format; (2) the
capabilities of the engines; (3) the type of the current statement:
normal, unsafe, or row injection). These parameters may conflict in
several ways, namely:
- binlog_format=STATEMENT for a row injection
- binlog_format=STATEMENT for an unsafe statement
- binlog_format=STATEMENT for an engine only supporting row logging
- binlog_format=ROW for an engine only supporting statement logging
- statement is unsafe and engine does not support row logging
- row injection in a table that does not support statement logging
- statement modifies one table that does not support row logging and
one that does not support statement logging
Several of these conflicts were not detected, or were detected with
an inappropriate error message. The problem of BUG#39934 was that no
appropriate error message was written for the case when an engine
only supporting row logging executed a row injection with
binlog_format=ROW. However, all above cases must be handled.
Fix 1:
Introduce new error codes (sql/share/errmsg.txt). Ensure that all
conditions are detected and handled in decide_logging_format()
Problem 2:
The binlog format shall be determined once per statement, in
decide_logging_format(). It shall not be changed before or after that.
Before decide_logging_format() is called, all information necessary to
determine the logging format must be available. This principle ensures
that all unsafe statements are handled in a consistent way.
However, this principle is not followed:
thd->set_current_stmt_binlog_row_based_if_mixed() is called in several
places, including from code executing UPDATE..LIMIT,
INSERT..SELECT..LIMIT, DELETE..LIMIT, INSERT DELAYED, and
SET @@binlog_format. After Problem 1 was fixed, that caused
inconsistencies where these unsafe statements would not print the
appropriate warnings or errors for some of the conflicts.
Fix 2:
Remove calls to THD::set_current_stmt_binlog_row_based_if_mixed() from
code executed after decide_logging_format(). Compensate by calling the
set_current_stmt_unsafe() at parse time. This way, all unsafe statements
are detected by decide_logging_format().
Problem 3:
INSERT DELAYED is not unsafe: it is logged in statement format even if
binlog_format=MIXED, and no warning is printed even if
binlog_format=STATEMENT. This is BUG#45825.
Fix 3:
Made INSERT DELAYED set itself to unsafe at parse time. This allows
decide_logging_format() to detect that a warning should be printed or
the binlog_format changed.
Problem 4:
LIMIT clause were not marked as unsafe when executed inside stored
functions/triggers/views/prepared statements. This is
BUG#45785.
Fix 4:
Make statements containing the LIMIT clause marked as unsafe at
parse time, instead of at execution time. This allows propagating
unsafe-ness to the view.
mysql-test/extra/rpl_tests/create_recursive_construct.inc:
Added auxiliary file used by binlog_unsafe.test to create and
execute recursive constructs
(functions/procedures/triggers/views/prepared statements).
mysql-test/extra/rpl_tests/rpl_foreign_key.test:
removed unnecessary set @@session.binlog_format
mysql-test/extra/rpl_tests/rpl_insert_delayed.test:
Filter out table id from table map events in binlog listing.
Got rid of $binlog_format_statement.
mysql-test/extra/rpl_tests/rpl_ndb_apply_status.test:
disable warnings around call to unsafe procedure
mysql-test/include/rpl_udf.inc:
Disabled warnings for code that generates warnings
for some binlog formats. That would otherwise cause
inconsistencies in the result file.
mysql-test/r/mysqldump.result:
Views are now unsafe if they contain a LIMIT clause.
That fixed BUG#45831. Due to BUG#45832, a warning is
printed for the CREATE VIEW statement.
mysql-test/r/sp_trans.result:
Unsafe statements in stored procedures did not give a warning if
binlog_format=statement. This is BUG#45824. Now they do, so this
result file gets a new warning.
mysql-test/suite/binlog/r/binlog_multi_engine.result:
Error message changed.
mysql-test/suite/binlog/r/binlog_statement_insert_delayed.result:
INSERT DELAYED didn't generate a warning when binlog_format=STATEMENT.
That was BUG#45825. Now there is a warning, so result file needs to be
updated.
mysql-test/suite/binlog/r/binlog_stm_ps.result:
Changed error message.
mysql-test/suite/binlog/r/binlog_unsafe.result:
updated result file:
- error message changed
- added test for most combinations of unsafe constructs invoked
from recursive constructs
- INSERT DELAYED now gives a warning (because BUG#45826 is fixed)
- INSERT..SELECT..LIMIT now gives a warning from inside recursive
constructs (because BUG#45785 was fixed)
- When a recursive construct (e.g., stored proc or function)
contains more than one statement, at least one of which is
unsafe, then all statements in the recursive construct give
warnings. This is a new bug introduced by this changeset.
It will be addressed in a post-push fix.
mysql-test/suite/binlog/t/binlog_innodb.test:
Changed error code for innodb updates with READ COMMITTED or
READ UNCOMMITTED transaction isolation level and
binlog_format=statement.
mysql-test/suite/binlog/t/binlog_multi_engine.test:
The error code has changed for statements where more than one
engine is involved and one of them is self-logging.
mysql-test/suite/binlog/t/binlog_unsafe-master.opt:
Since binlog_unsafe now tests unsafe-ness of UDF's, we need an extra
flag in the .opt file.
mysql-test/suite/binlog/t/binlog_unsafe.test:
- Clarified comment.
- Rewrote first part of test. Now it tests not only unsafe variables
and functions, but also unsafe-ness due to INSERT..SELECT..LIMIT,
INSERT DELAYED, insert into two autoinc columns, use of UDF's, and
access to log tables in the mysql database.
Also, in addition to functions, procedures, triggers, and prepared
statements, it now also tests views; and it constructs recursive
calls in two levels by combining these recursive constructs.
Part of the logic is in extra/rpl_tests/create_recursive_construct.inc.
- added tests for all special system variables that should not be unsafe.
- added specific tests for BUG#45785 and BUG#45825
mysql-test/suite/rpl/r/rpl_events.result:
updated result file
mysql-test/suite/rpl/r/rpl_extraColmaster_innodb.result:
updated result file
mysql-test/suite/rpl/r/rpl_extraColmaster_myisam.result:
updated result file
mysql-test/suite/rpl/r/rpl_foreign_key_innodb.result:
updated result file
mysql-test/suite/rpl/r/rpl_idempotency.result:
updated result file
mysql-test/suite/rpl/r/rpl_mix_found_rows.result:
Split rpl_found_rows.test into rpl_mix_found_rows.test (a new file) and
rpl_stm_found_rows.test (renamed rpl_found_rows.test). This file equals
the second half of the old rpl_found_rows.result, with the following
modifications:
- minor formatting changes
- additional initialization
mysql-test/suite/rpl/r/rpl_mix_insert_delayed.result:
Moved out code operating in mixed mode from rpl_stm_insert_delayed
(into rpl_mix_insert_delayed) and got rid of explicit setting of
binlog format.
mysql-test/suite/rpl/r/rpl_rbr_to_sbr.result:
updated result file
mysql-test/suite/rpl/r/rpl_row_idempotency.result:
Moved the second half of rpl_idempotency.test, which only
executed in row mode, to rpl_row_idempotency.test. This is
the new result file.
mysql-test/suite/rpl/r/rpl_row_insert_delayed.result:
Got rid of unnecessary explicit setting of binlog format.
mysql-test/suite/rpl/r/rpl_stm_found_rows.result:
Split rpl_found_rows.test into rpl_mix_found_rows.test (a new file) and
rpl_stm_found_rows.test (renamed rpl_found_rows.test). Changes in
this file:
- minor formatting changes
- warning is now issued for unsafe statements inside procedures
(since BUG#45824 is fixed)
- second half of file is moved to rpl_mix_found_rows.result
mysql-test/suite/rpl/r/rpl_stm_insert_delayed.result:
Moved out code operating in mixed mode from rpl_stm_insert_delayed
(into rpl_mix_insert_delayed) and got rid of explicit setting of
binlog format.
mysql-test/suite/rpl/r/rpl_stm_loadfile.result:
error message changed
mysql-test/suite/rpl/r/rpl_temporary_errors.result:
updated result file
mysql-test/suite/rpl/r/rpl_udf.result:
Remove explicit set of binlog format (and triplicate test execution)
and rely on test system executing the test in all binlog formats.
mysql-test/suite/rpl/t/rpl_bug31076.test:
Test is only valid in mixed or row mode since it generates row events.
mysql-test/suite/rpl/t/rpl_events.test:
Removed explicit set of binlog_format and removed duplicate testing.
Instead, we rely on the test system to try all binlog formats.
mysql-test/suite/rpl/t/rpl_extraColmaster_innodb.test:
Removed triplicate testing and instead relying on test system.
Test is only relevant for row format since statement-based replication
cannot handle extra columns on master.
mysql-test/suite/rpl/t/rpl_extraColmaster_myisam.test:
Removed triplicate testing and instead relying on test system.
Test is only relevant for row format since statement-based replication
cannot handle extra columns on master.
mysql-test/suite/rpl/t/rpl_idempotency-slave.opt:
Removed .opt file to avoid server restarts.
mysql-test/suite/rpl/t/rpl_idempotency.test:
- Moved out row-only tests to a new test file, rpl_row_idempotency.test.
rpl_idempotency now only contains tests that execute in all
binlog_formats.
- While I was here, also removed .opt file to avoid server restarts.
The slave_exec_mode is now set inside the test instead.
mysql-test/suite/rpl/t/rpl_mix_found_rows.test:
Split rpl_found_rows.test into rpl_mix_found_rows.test (a new file) and
rpl_stm_found_rows.test (renamed rpl_found_rows.test). This file
contains the second half of the original rpl_found_rows.test with the
follwing changes:
- initialization
- removed SET_BINLOG_FORMAT and added have_binlog_format_mixed.inc
- minor formatting changes
mysql-test/suite/rpl/t/rpl_mix_insert_delayed.test:
Moved out code operating in mixed mode from rpl_stm_insert_delayed
(into rpl_mix_insert_delayed) and got rid of explicit setting of
binlog format.
mysql-test/suite/rpl/t/rpl_rbr_to_sbr.test:
Test cannot execute in statement mode, since we no longer
switch to row format when binlog_format=statement.
Enforced mixed mode throughout the test.
mysql-test/suite/rpl/t/rpl_row_idempotency.test:
Moved the second half of rpl_idempotency.test, which only
executed in row mode, to this new file. We now rely on the
test system to set binlog format.
mysql-test/suite/rpl/t/rpl_row_insert_delayed.test:
- Got rid of unnecessary explicit setting of binlog format.
- extra/rpl_tests/rpl_insert_delayed.test does not need the
$binlog_format_statement variable any more, so that was
removed.
mysql-test/suite/rpl/t/rpl_slave_skip.test:
The test switches binlog_format internally and master generates both
row and statement events. Hence, the slave must be able to log in both
statement and row format. Hence test was changed to only execute in
mixed mode.
mysql-test/suite/rpl/t/rpl_stm_found_rows.test:
Split rpl_found_rows.test into rpl_mix_found_rows.test (a new file) and
rpl_stm_found_rows.test (renamed rpl_found_rows.test). Changes in
this file:
- minor formatting changes
- added have_binlog_format_statement and removed SET BINLOG_FORMAT.
- second half of file is moved to rpl_mix_found_rows.test
- added cleanup code
mysql-test/suite/rpl/t/rpl_stm_insert_delayed.test:
Moved out code operating in mixed mode from rpl_stm_insert_delayed
(into rpl_mix_insert_delayed) and got rid of explicit setting of
binlog format.
mysql-test/suite/rpl/t/rpl_switch_stm_row_mixed.test:
The test switches binlog_format internally and master generates both
row and statement events. Hence, the slave must be able to log in both
statement and row format. Hence test was changed to only execute in
mixed mode on slave.
mysql-test/suite/rpl/t/rpl_temporary_errors.test:
Removed explicit set of binlog format. Instead, the test now only
executes in row mode.
mysql-test/suite/rpl/t/rpl_udf.test:
Remove explicit set of binlog format (and triplicate test execution)
and rely on test system executing the test in all binlog formats.
mysql-test/suite/rpl_ndb/combinations:
Added combinations file for rpl_ndb.
mysql-test/suite/rpl_ndb/r/rpl_ndb_binlog_format_errors.result:
new result file
mysql-test/suite/rpl_ndb/r/rpl_ndb_circular_simplex.result:
updated result file
mysql-test/suite/rpl_ndb/t/rpl_ndb_2innodb.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_2myisam.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_basic.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_binlog_format_errors-master.opt:
new option file
mysql-test/suite/rpl_ndb/t/rpl_ndb_binlog_format_errors-slave.opt:
new option file
mysql-test/suite/rpl_ndb/t/rpl_ndb_binlog_format_errors.test:
New test case to verify all errors and warnings generated by
decide_logging_format.
mysql-test/suite/rpl_ndb/t/rpl_ndb_blob.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_blob2.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_circular.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_circular_simplex.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
While I was here, also made the test clean up after itself.
mysql-test/suite/rpl_ndb/t/rpl_ndb_commit_afterflush.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_ctype_ucs2_def.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_delete_nowhere.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_do_db.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_do_table.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_func003.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_innodb_trans.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_insert_ignore.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_mixed_engines_transactions.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_multi_update3.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_rep_ignore.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_row_001.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_sp003.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_sp006.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_trig004.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/t/partition_innodb_stmt.test:
Changed error code for innodb updates with READ COMMITTED or
READ UNCOMMITTED transaction isolation level and
binlog_format=statement.
sql/event_db_repository.cc:
Use member function to read current_stmt_binlog_row_based.
sql/events.cc:
Use member function to read current_stmt_binlog_row_based.
sql/ha_ndbcluster_binlog.cc:
reset_current_stmt_binlog_row_based() is not a no-op for the ndb_binlog
thread any more. Instead, the ndb_binlog thread now forces row mode both
initially and just after calling mysql_parse. (mysql_parse() is the only
place where reset_current_stmt_binlog_row_based() may be called from
the ndb_binlog thread, so these are the only two places that need to
change.)
sql/ha_partition.cc:
Use member function to read current_stmt_binlog_row_based.
sql/handler.cc:
Use member function to read current_stmt_binlog_row_based.
sql/item_create.cc:
Added DBUG_ENTER to some functions, to be able to trace when
set_stmt_unsafe is called.
sql/log.cc:
Use member function to read current_stmt_binlog_row_based.
sql/log_event.cc:
- Moved logic for changing to row format out of do_apply_event (and into
decide_logging_format).
- Added @todo comment for post-push cleanup.
sql/log_event_old.cc:
Move logic for changing to row format out of do_apply_event (and into
decide_logging_format).
sql/mysql_priv.h:
Make decide_logging_format() a member of the THD class, for two reasons:
- It is natural from an object-oriented perspective.
- decide_logging_format() needs to access private members of THD
(specifically, the new binlog_warning_flags field).
sql/rpl_injector.cc:
Removed call to set_current_stmt_binlog_row_based().
From now on, only decide_logging_fromat is allowed to modify
current_stmt_binlog_row_based. This call is from the ndb_binlog
thread, mostly executing code in ha_ndbcluster_binlog.cc.
This call can be safely removed, because:
- current_stmt_binlog_row_based is initialized for the ndb_binlog
thread's THD object when the THD object is created. So we're
not going to read uninitialized memory.
- The behavior of ndb_binlog thread does not use the state of the
current_stmt_binlog_row_based. It is conceivable that the
ndb_binlog thread would rely on the current_stmt_binlog_format
in two situations:
(1) when it calls mysql_parse;
(2) when it calls THD::binlog_query.
In case (1), it always clears THD::options&OPTION_BIN_LOG (because
run_query() in ha_ndbcluster_binlog.cc is only called with
disable_binlogging = TRUE).
In case (2), it always uses qtype=STMT_QUERY_TYPE.
sql/set_var.cc:
Added @todo comment for post-push cleanup.
sql/share/errmsg.txt:
Added new error messages and clarified ER_BINLOG_UNSAFE_STATEMENT.
sql/sp.cc:
Added DBUG_ENTER, to be able to trace when set_stmt_unsafe is called.
Got rid of MYSQL_QUERY_TYPE: it was equivalent to STMT_QUERY_TYPE.
sql/sp_head.cc:
Use member function to read current_stmt_binlog_row_based.
sql/sp_head.h:
Added DBUG_ENTER, to be able to trace when set_stmt_unsafe is called.
sql/sql_acl.cc:
Got rid of MYSQL_QUERY_TYPE: it was equivalent to STMT_QUERY_TYPE.
sql/sql_base.cc:
- Made decide_logging_format take care of all logic for deciding the
logging format, and for determining the related warnings and errors.
See comment above decide_logging_format for details.
- Made decide_logging_format a member function of THD, since it needs
to access private members of THD and since its purpose is to update
the state of a THD object.
- Added DBUG_ENTER, to be able to trace when set_stmt_unsafe is called.
sql/sql_class.cc:
- Moved logic for determining unsafe warnings away from THD::binlog_query
(and into decide_logging_format()). Now, it works like this:
1. decide_logging_format detects that the current statement shall
produce a warning, if it ever makes it to the binlog
2. decide_logging_format sets a flag of THD::binlog_warning_flags.
3. THD::binlog_query reads the flag. If the flag is set, it generates
a warning.
- Use member function to read current_stmt_binlog_row_based.
sql/sql_class.h:
- Added THD::binlog_warning_flags (see sql_class.cc for explanation).
- Made decide_logging_format() and reset_for_next_command() member
functions of THD (instead of standalone functions). This was needed
for two reasons: (1) the functions need to access the private member
THD::binlog_warning_flags; (2) the purpose of these functions is to
update the staet of a THD object, so from an object-oriented point
of view they should be member functions.
- Encapsulated current_stmt_binlog_row_based, so it is now private and
can only be accessed from a member function. Also changed the
data type to an enumeration instead of a bool.
- Removed MYSQL_QUERY_TYPE, because it was equivalent to
STMT_QUERY_TYPE anyways.
- When reset_current_stmt_binlog_row_based was called from the
ndb_binlog thread, it would behave as a no-op. This special
case has been removed, and the behavior of
reset_current_stmt_binlog_row_based does not depend on which thread
calls it any more. The special case did not serve any purpose,
since the ndb binlog thread did not take the
current_stmt_binlog_row_based flag into account anyways.
sql/sql_delete.cc:
- Moved logic for setting row format for DELETE..LIMIT away from
mysql_prepare_delete.
(Instead, we mark the statement as unsafe at parse time (sql_yacc.yy)
and rely on decide_logging_format() (sql_class.cc) to set row format.)
This is part of the fix for BUG#45831.
- Use member function to read current_stmt_binlog_row_based.
sql/sql_insert.cc:
- Removed unnecessary calls to thd->lex->set_stmt_unsafe() and
thd->set_current_stmt_binlog_row_based_if_mixed() from
handle_delayed_insert(). The calls are unnecessary because they
have already been made; they were made in the constructor of
the `di' object.
- Since decide_logging_format() is now a member function of THD, code
that calls decide_logging_format() had to be updated.
- Added DBUG_ENTER call, to be able to trace when set_stmt_unsafe is
called.
- Moved call to set_stmt_unsafe() for INSERT..SELECT..LIMIT away from
mysql_insert_select_prepare() (and into decide_logging_format).
This is part of the fix for BUG#45831.
- Use member function to read current_stmt_binlog_row_based.
sql/sql_lex.h:
- Added the flag BINLOG_STMT_FLAG_ROW_INJECTION to enum_binlog_stmt_flag.
This was necessary so that a statement can identify itself as a row
injection.
- Added appropriate setter and getter functions for the new flag.
- Added or clarified some comments.
- Added DBUG_ENTER()
sql/sql_load.cc:
Use member function to read current_stmt_binlog_row_based.
sql/sql_parse.cc:
- Made mysql_reset_thd_for_next_command() clear thd->binlog_warning_flags.
- Since thd->binlog_warning_flags is private, it must be set in a
member function of THD. Hence, moved the body of
mysql_reset_thd_for_next_command() to the new member function
THD::reset_thd_for_next_command(), and made
mysql_reset_thd_for_next_command() call
THD::reset_thd_for_next_command().
- Removed confusing comment.
- Use member function to read current_stmt_binlog_row_based.
sql/sql_repl.cc:
Use member function to read current_stmt_binlog_row_based.
sql/sql_table.cc:
Use member function to read current_stmt_binlog_row_based.
sql/sql_udf.cc:
Use member function to read current_stmt_binlog_row_based.
sql/sql_update.cc:
Moved logic for setting row format for UPDATE..LIMIT away from
mysql_prepare_update.
(Instead, we mark the statement as unsafe at parse time (sql_yacc.yy)
and rely on decide_logging_format() (sql_class.cc) to set row format.)
This is part of the fix for BUG#45831.
sql/sql_yacc.yy:
Made INSERT DELAYED, INSERT..SELECT..LIMIT, UPDATE..LIMIT, and
DELETE..LIMIT mark themselves as unsafe at parse time (instead
of at execution time).
This is part of the fixes BUG#45831 and BUG#45825.
storage/example/ha_example.cc:
Made exampledb accept inserts. This was needed by the new test case
rpl_ndb_binlog_format_errors, because it needs an engine that
is statement-only (and accepts inserts).
storage/example/ha_example.h:
Made exampledb a statement-only engine instead of a row-only engine.
No existing test relied exampledb's row-only capabilities. The new
test case rpl_ndb_binlog_format_errors needs an engine that is
statement-only.
storage/innobase/handler/ha_innodb.cc:
- Changed error error code and message given by innodb when
binlog_format=STATEMENT and transaction isolation level is
READ COMMITTED or READ UNCOMMITTED.
- While I was here, also simplified the condition for
checking when to give the error.
mutually-nested subqueries
Queries of the form
SELECT * FROM (SELECT 1) AS t1,
(SELECT 2) AS t2,...
(SELECT 32) AS t32
caused the "Too high level of nesting for select" error
as if the query has a form
SELECT * FROM (SELECT 1 FROM (SELECT 2 FROM (SELECT 3 FROM...
The table_factor parser rule has been modified to adjust
the LEX::nest_level variable value after every derived table.
mysql-test/r/derived.result:
Added test case for bug #41156.
mysql-test/t/derived.test:
Added test case for bug #41156.
sql/sql_yacc.yy:
Bug #41156: List of derived tables acts like a chain of
mutually-nested subqueries
The select_derived2 parser rule calls mysql_new_select()
calls push_context() and nest_level++, however only
the pop_context() was called at the end of derived table
parsing at the table_factor rule.
The table_factor parser rule has been modified to adjust
the LEX::nest_level variable value after every derived table.
PAGE_CHECKSUM ROW_FORMAT=PAGE accepted, does nothing"
Remove unused code that would lead to warnings when compiling
sql_yacc.yy.
sql/handler.h:
Remove unused defines.
sql/sql_yacc.yy:
Remove unused grammar.
sql/table.h:
Remove unused TABLE members.
with gcc 4.3.2
Compiling MySQL with gcc 4.3.2 and later produces a number of
warnings, many of which are new with the recent compiler
versions.
This bug will be resolved in more than one patch to limit the
size of changesets. This is the second patch, fixing more
of the warnings.
