Revert following bug fix:
Bug#20685029: SLAVE IO THREAD SHOULD STOP WHEN DISK IS
FULL
Bug#21753696: MAKE SHOW SLAVE STATUS NON BLOCKING IF IO
THREAD WAITS FOR DISK SPACE
This fix results in a deadlock between slave IO thread
and SQL thread.
(cherry picked from commit e3fea6c6dbb36c6ab21c4ab777224560e9608b53)
FULL
Bug#21753696: MAKE SHOW SLAVE STATUS NON BLOCKING IF IO
THREAD WAITS FOR DISK SPACE
Problem:
========
Currently SHOW SLAVE STATUS blocks if IO thread waits for
disk space. This makes automation tools verifying
server health block on taking relevant action. Finally this
will create SHOW SLAVE STATUS piles.
Analysis:
=========
SHOW SLAVE STATUS hangs on mi->data_lock if relay log write
is waiting for free disk space while holding mi->data_lock.
mi->data_lock is needed to protect the format description
event (mi->format_description_event) which is accessed by
the clients running FLUSH LOGS and slave IO thread. Note
relay log writes don't need to be protected by
mi->data_lock, LOCK_log is used to protect relay log between
IO and SQL thread (see MYSQL_BIN_LOG::append_event). The
code takes mi->data_lock to protect
mi->format_description_event during relay log rotate which
might get triggered right after relay log write.
Fix:
====
Release the data_lock just for the duration of writing into
relay log.
Made change to ensure the following lock order is maintained
to avoid deadlocks.
data_lock, LOCK_log
data_lock is held during relay log rotations to protect
the description event.
Do not use format function attribute for sql_print_xxx() family of
functions as they use a MariaDB-specific extension of printf instead
of one provided by the system.
We don't support changing tc_log implementation at run time.
If the first XA-capable engine is loaded with INSTALL PLUGIN - disable its
XA capabilities with a warning
Fix some problems in the TC_LOG_MMAP commit processing, which could
lead to assertions in some cases.
Problems are mostly reproducible in MariaDB 10.0 with asynchroneous
commit checkpoints, but most of the problems were present in earlier
versions also.
two tests still fail:
main.innodb_icp and main.range_vs_index_merge_innodb
call records_in_range() with both range ends being open
(which triggers an assert)
the new file is fully synced to disk and binlog index. This fixes a window
where a crash would leave next server restart unable to detect that a crash
occured, causing recovery to fail.
The function mysql_show_binlog_events has a local stack variable
'LOG_INFO linfo;', which is assigned to thd->current_linfo, however
this variable goes out of scope and is destroyed before clean
thd->current_linfo.
The problem is solved by moving 'LOG_INFO linfo;' to function scope.
The function mysql_show_binlog_events has a local stack variable
'LOG_INFO linfo;', which is assigned to thd->current_linfo, however
this variable goes out of scope and is destroyed before clean
thd->current_linfo.
The problem is solved by moving 'LOG_INFO linfo;' to function scope.
BIN LOG HAS BEEN MOVED
When moving the binary/relay log files from one location to
another and restarting the server with a different log-bin or
relay-log paths, would cause the startup process to abort. The
root cause was that the server would not be able to find the log
files because it would consider old paths for entries in the
index file instead of the new location. What's even worse, the
relative paths would not be considered relative to the path
provided in log-bin and relay-log, but to mysql_data_dir.
We fix the cases where the server contains relative paths. When
the server is reading from the index file, it checks whether the
entry contains relative paths. If it does, we replace it with the
absolute path set in log-bin/relay-log option. Absolute paths
remain unchanged and the index must be manually edited to
consider the new log-bin and/or relay-log path (this should be
documented). This is a fix for a GA version, that does not break
behavior (that much).
For development versions, we should go with Zhenxing's approach
that removes paths altogether from index files.
mysql-test/include/begin_include_file.inc:
Added parameter to keep the begin_include_file.inc silent. Useful when
including scripts that contain platform dependent parameters, for example:
--let $rpl_server_parameters=--log-bin=$tmpdir/slave-bin --relay-log=$tmpdir/slave-relay-bin
--let $keep_include_silent=1
source include/rpl_start_server.inc;
--let $keep_include_silent=0
We want the paths ($tmpdir/slave-bin and $tmpdir/slave-relay-bin) not to be in the
result file.
mysql-test/suite/rpl/t/rpl_binlog_index.test:
Test case.
sql/log.cc:
When finding the corresponding log entry in the index file, we first
normalize the paths before doing the comparison. This will make relative
paths to be turned into absolute paths (based on the opt_bin_logname or
opt_relay_logname) and then compared against also, expanded paths entered,
through CHANGE MASTER for instance.
sql/log.h:
Added normalize_binlog_name, which turns relative paths, into absolute paths
given the parameter: is_relay_log ? opt_relay_logname : opt_bin_logname .
sql/mysqld.cc:
Exposing opt_bin_logname.
sql/mysqld.h:
Exposing opt_bin_logname.
BIN LOG HAS BEEN MOVED
When moving the binary/relay log files from one location to
another and restarting the server with a different log-bin or
relay-log paths, would cause the startup process to abort. The
root cause was that the server would not be able to find the log
files because it would consider old paths for entries in the
index file instead of the new location. What's even worse, the
relative paths would not be considered relative to the path
provided in log-bin and relay-log, but to mysql_data_dir.
We fix the cases where the server contains relative paths. When
the server is reading from the index file, it checks whether the
entry contains relative paths. If it does, we replace it with the
absolute path set in log-bin/relay-log option. Absolute paths
remain unchanged and the index must be manually edited to
consider the new log-bin and/or relay-log path (this should be
documented). This is a fix for a GA version, that does not break
behavior (that much).
For development versions, we should go with Zhenxing's approach
that removes paths altogether from index files.
The bug case is similar to one fixed earlier bug_49536.
Deadlock involving LOCK_log appears to be possible because the purge running thread
is holding LOCK_log whereas there is no sense of doing that and which fact was
exploited by the earlier bug fixes.
Fixed with small reengineering of rotate_and_purge(), adding two new methods and
setting up a policy to execute those instead of the former
rotate_and_purge(RP_LOCK_LOG_IS_ALREADY_LOCKED).
The policy for using rotate(), purge() is that if the caller acquires LOCK_log itself,
it should call rotate(), release the mutex and run purge().
Side effect of this patch is refining error message of bug@11747416 to print
the whole path.
mysql-test/suite/rpl/r/rpl_cant_read_event_incident.result:
the file name printing is changed to a relative path instead of just the file name.
mysql-test/suite/rpl/r/rpl_log_pos.result:
the file name printing is changed to a relative path instead of just the file name.
mysql-test/suite/rpl/r/rpl_manual_change_index_file.result:
the file name printing is changed to a relative path instead of just the file name.
mysql-test/suite/rpl/r/rpl_packet.result:
the file name printing is changed to a relative path instead of just the file name.
mysql-test/suite/rpl/r/rpl_rotate_purge_deadlock.result:
new result file is added.
mysql-test/suite/rpl/t/rpl_cant_read_event_incident.test:
The test of that bug can't satisfy windows and unix backslash interpretation so windows
execution is chosen to bypass.
mysql-test/suite/rpl/t/rpl_rotate_purge_deadlock-master.opt:
new opt file is added.
mysql-test/suite/rpl/t/rpl_rotate_purge_deadlock.test:
regression test is added as well as verification of a
possible side effect of the fixes is tried.
sql/log.cc:
LOCK_log is never taken during execution of log purging routine.
The former MYSQL_BIN_LOG::rotate_and_purge is made to necessarily
acquiring and releasing LOCK_log.
If caller takes the mutex itself it has to use a new rotate(), purge()
methods combination and to never let purge() be run with LOCK_log grabbed.
split apart to allow
the caller to chose either it
Simulation of concurrently rotating/purging threads is added.
sql/log.h:
new rotate(), purge() methods are added to be used instead of
the former rotate_and_purge(RP_LOCK_LOG_IS_ALREADY_LOCKED).
rotate_and_purge() signature is changed. Caller should not call rotate_and_purge()
but rather {rotate(), purge()} if LOCK_log is acquired by it.
sql/rpl_injector.cc:
changes to reflect the new rotate_and_purge() signature.
sql/sql_class.h:
unnecessary constants are removed.
sql/sql_parse.cc:
changes to reflect the new rotate_and_purge() signature.
sql/sql_reload.cc:
changes to reflect the new rotate_and_purge() signature.
sql/sql_repl.cc:
followup for bug@11747416: the file name printing is changed to a relative
path instead of just the file name.
The bug case is similar to one fixed earlier bug_49536.
Deadlock involving LOCK_log appears to be possible because the purge running thread
is holding LOCK_log whereas there is no sense of doing that and which fact was
exploited by the earlier bug fixes.
Fixed with small reengineering of rotate_and_purge(), adding two new methods and
setting up a policy to execute those instead of the former
rotate_and_purge(RP_LOCK_LOG_IS_ALREADY_LOCKED).
The policy for using rotate(), purge() is that if the caller acquires LOCK_log itself,
it should call rotate(), release the mutex and run purge().
Side effect of this patch is refining error message of bug@11747416 to print
the whole path.
sql/sql_insert.cc:
CREATE ... IF NOT EXISTS may do nothing, but
it is still not a failure. don't forget to my_ok it.
******
CREATE ... IF NOT EXISTS may do nothing, but
it is still not a failure. don't forget to my_ok it.
sql/sql_table.cc:
small cleanup
******
small cleanup
A lot of small fixes and new test cases.
client/mysqlbinlog.cc:
Cast removed
client/mysqltest.cc:
Added missing DBUG_RETURN
include/my_pthread.h:
set_timespec_time_nsec() now only takes one argument
mysql-test/t/date_formats.test:
Remove --disable_ps_protocl as now also ps supports microseconds
mysys/my_uuid.c:
Changed to use my_interval_timer() instead of my_getsystime()
mysys/waiting_threads.c:
Changed to use my_hrtime()
sql/field.h:
Added bool special_const_compare() for fields that may convert values before compare (like year)
sql/field_conv.cc:
Added test to get optimal copying of identical temporal values.
sql/item.cc:
Return that item_int is equal if it's positive, even if unsigned flag is different.
Fixed Item_cache_str::save_in_field() to have identical null check as other similar functions
Added proper NULL check to Item_cache_int::save_in_field()
sql/item_cmpfunc.cc:
Don't call convert_constant_item() if there is nothing that is worth converting.
Simplified test when years should be converted
sql/item_sum.cc:
Mark cache values in Item_sum_hybrid as not constants to ensure they are not replaced by other cache values in compare_datetime()
sql/item_timefunc.cc:
Changed sec_to_time() to take a my_decimal argument to ensure we don't loose any sub seconds.
Added Item_temporal_func::get_time() (This simplifies some things)
sql/mysql_priv.h:
Added Lazy_string_decimal()
sql/mysqld.cc:
Added my_decimal constants max_seconds_for_time_type, time_second_part_factor
sql/table.cc:
Changed expr_arena to be of type CONVENTIONAL_EXECUTION to ensure that we don't loose any items that are created by fix_fields()
sql/tztime.cc:
TIME_to_gmt_sec() now sets *in_dst_time_gap in case of errors
This is needed to be able to detect if timestamp is 0
storage/maria/lockman.c:
Changed from my_getsystime() to set_timespec_time_nsec()
storage/maria/ma_loghandler.c:
Changed from my_getsystime() to my_hrtime()
storage/maria/ma_recovery.c:
Changed from my_getsystime() to mmicrosecond_interval_timer()
storage/maria/unittest/trnman-t.c:
Changed from my_getsystime() to mmicrosecond_interval_timer()
storage/xtradb/handler/ha_innodb.cc:
Added support for new time,datetime and timestamp
unittest/mysys/thr_template.c:
my_getsystime() -> my_interval_timer()
unittest/mysys/waiting_threads-t.c:
my_getsystime() -> my_interval_timer()
