.. into MariaDB 5.3
Fix for Bug#12667154 SAME QUERY EXEC AS WHERE SUBQ GIVES DIFFERENT
RESULTS ON IN() & NOT IN() COMP #3
This bug causes a wrong result in mysql-trunk when ICP is used
and bad performance in mysql-5.5 and mysql-trunk.
Using the query from bug report to explain what happens and causes
the wrong result from the query when ICP is enabled:
1. The t3 table contains four records. The outer query will read
these and for each of these it will execute the subquery.
2. Before the first execution of the subquery it will be optimized. In
this case the important is what happens to the first table t1:
-make_join_select() will call the range optimizer which decides
that t1 should be accessed using a range scan on the k1 index
It creates a QUICK_RANGE_SELECT object for this.
-As the last part of optimization the ICP code pushes the
condition down to the storage engine for table t1 on the k1 index.
This produces the following information in the explain for this table:
2 DEPENDENT SUBQUERY t1 range k1 k1 5 NULL 3 Using index condition; Using filesort
Note the use of filesort.
3. The first execution of the subquery does (among other things) due
to the need for sorting:
a. Call create_sort_index() which again will call find_all_keys():
b. find_all_keys() will read the required keys for all qualifying
rows from the storage engine. To do this it checks if it has a
quick-select for the table. It will use the quick-select for
reading records. In this case it will read four records from the
storage engine (based on the range criteria). The storage engine
will evaluate the pushed index condition for each record.
c. At the end of create_sort_index() there is code that cleans up a
lot of stuff on the join tab. One of the things that is cleaned
is the select object. The result of this is that the
quick-select object created in make_join_select is deleted.
4. The second execution of the subquery does the same as the first but
the result is different:
a. Call create_sort_index() which again will call find_all_keys()
(same as for the first execution)
b. find_all_keys() will read the keys from the storage engine. To
do this it checks if it has a quick-select for the table. Now
there is NO quick-select object(!) (since it was deleted in
step 3c). So find_all_keys defaults to read the table using a
table scan instead. So instead of reading the four relevant records
in the range it reads the entire table (6 records). It then
evaluates the table's condition (and here it goes wrong). Since
the entire condition has been pushed down to the storage engine
using ICP all 6 records qualify. (Note that the storage engine
will not evaluate the pushed index condition in this case since
it was pushed for the k1 index and now we do a table scan
without any index being used).
The result is that here we return six qualifying key values
instead of four due to not evaluating the table's condition.
c. As above.
5. The two last execution of the subquery will also produce wrong results
for the same reason.
Summary: The problem occurs due to all but the first executions of the
subquery is done as a table scan without evaluating the table's
condition (which is pushed to the storage engine on a different
index). This is caused by the create_sort_index() function deleting
the quick-select object that should have been used for executing the
subquery as a range scan.
Note that this bug in addition to causing wrong results also can
result in bad performance due to executing the subquery using a table
scan instead of a range scan. This is an issue in MySQL 5.5.
The fix for this problem is to avoid that the Quick-select-object that
the optimizer created is deleted when create_sort_index() is doing
clean-up of the join-tab. This will ensure that the quick-select
object and the corresponding pushed index condition will be available
and used by all following executions of the subquery.
cmake/cpack_rpm.cmake:
* mark all cnf files with %config(noreplace)
* add the forgotten postun script
sql/sys_vars.cc:
0 for a string variable means "no default. But datadir has the default value.
support-files/rpm/server-postin.sh:
* use mysqld --help to determine the correct datadir in the presence of my.cnf files
(better than my_print_defaults, because it considers the correct group set).
* Only create users, and chown/chmod if it's a fresh install, not an upgrade.
* only run mysql_install_db if datadir does not exist
- Wrong thd uses in Item_subselect, could lead to crash
- Inititalize uninitialized variable in new autoincrement handling code
sql/handler.cc:
More DBUG_PRINT
sql/item_subselect.cc:
Wrong thd uses in Item_subselect, could lead to crash
storage/innobase/handler/ha_innodb.cc:
Initialize variable needed by upper level. This only happens when auto-increment value wraps over.
storage/xtradb/handler/ha_innodb.cc:
Initialize variable needed by upper level. This only happens when auto-increment value wraps over.
Documentation of the feature can be found at: http://kb.askmonty.org/en/multi-source-replication/
This code is based on code from Taobao, developed by Plinux
Other things:
- Added new commands: START ALL SLAVES, STOP ALL SLAVES and SHOW FULL SLAVE STATUS
- Almost all usage of 'active_mi' is deleted.
- Added parameter to reset_logs() so that one can specify if new logs should be created.
- Check wildcard match as early as possible for SHOW STATUS. This makes SHOW STATUS like 'xxx' a lot faster and use less mutex
- Made max_relay_log_size depending on master connection.
- Added sys_vars.default_master_connection_basic to fix a failure in sys_vars.all_vars, modified sql_slave_skip_counter_basic to allow session-level settings
- Added commands to mysqladmin: start-all-slaves & stop-all-slaves
- Removed logging of "next log '%s' is currently active | not active"
- Fixed bug in my_vsnprintf() when using positional parameters with length
- Added fn_ext2(), which returns pointer to last '.' in file name
- max_relay_log_size now acts as a normal slave specific variable
- Don't store replication position if innobase_overwrite_relay_log_info is not set
- max_relay_log_size copies it's values from max_binlog_size at startup
BUILD/SETUP.sh:
Added -Wno-invalid-offsetof to get rid of warning of offsetof() on C++ class (safe in the contex we use it)
client/mysqladmin.cc:
Added commands start-all-slaves & stop-all-slaves
client/mysqltest.cc:
Added support for error names starting with 'W'
Added connection_name support to --sync_with_master
cmake/maintainer.cmake:
Added -Wno-invalid-offsetof to get rid of warning of offsetof() on C++ class (safe in the contex we use it)
include/my_sys.h:
Added fn_ext2(), which returns pointer to last '.' in file name
include/mysql/plugin.h:
Added SHOW_SIMPLE_FUNC
include/mysql/plugin_audit.h.pp:
Updated signature file
include/mysql/plugin_auth.h.pp:
Updated signature file
include/mysql/plugin_ftparser.h.pp:
Updated signature file
mysql-test/extra/rpl_tests/rpl_max_relay_size.test:
Updated test
mysql-test/include/setup_fake_relay_log.inc:
There is no orphan relay log files anymore
mysql-test/mysql-test-run.pl:
Added multi_source to test suite
mysql-test/r/flush.result:
Added test for new syntax of flush relay logs (can't repeat relay logs or slave)
mysql-test/r/mysqld--help.result:
Updated result
mysql-test/r/mysqltest.result:
Updated result
mysql-test/r/parser.result:
Updated result
mysql-test/r/signal_code.result:
Updated result after introducing new commands
mysql-test/r/sp-code.result:
Updated result after introducing new commands
mysql-test/suite/multi_source:
Tests for multi-source
mysql-test/suite/multi_source/info_logs-master.opt:
Test with strange file names
mysql-test/suite/multi_source/info_logs.result:
Test of logs
mysql-test/suite/multi_source/info_logs.test:
Test of logs
mysql-test/suite/multi_source/my.cnf:
Setup of multi-master tests
Added log-warnings to get more information to the log files
mysql-test/suite/multi_source/relaylog_events.result:
Test relay log handling
mysql-test/suite/multi_source/relaylog_events.test:
Test relay log handling
mysql-test/suite/multi_source/reset_slave.result:
Test RESET SLAVE
mysql-test/suite/multi_source/reset_slave.test:
Test RESET SLAVE
mysql-test/suite/multi_source/simple.result:
Simple basic test of multi-source functionality
mysql-test/suite/multi_source/simple.test:
Simple basic test of multi-source functionality
mysql-test/suite/multi_source/skip_counter.result:
Testing skip_counter and max_relay_log_size
mysql-test/suite/multi_source/skip_counter.test:
Testing skip_counter and max_relay_log_size
mysql-test/suite/multi_source/syntax.result:
Test of multi-source syntax
mysql-test/suite/multi_source/syntax.test:
Test of multi-source syntax
mysql-test/suite/rpl/r/rpl_deadlock_innodb.result:
New warnings
mysql-test/suite/rpl/r/rpl_filter_dbs_dynamic.result:
Improved error texts
mysql-test/suite/rpl/r/rpl_filter_tables_dynamic.result:
Improved error texts
mysql-test/suite/rpl/r/rpl_filter_wild_tables_dynamic.result:
Improved error texts
mysql-test/suite/rpl/r/rpl_flush_logs.result:
Update results
mysql-test/suite/rpl/r/rpl_heartbeat.result:
Warning was removed
mysql-test/suite/rpl/r/rpl_heartbeat_basic.result:
Warning was removed
mysql-test/suite/rpl/r/rpl_rotate_logs.result:
Updated results because of new error messages
mysql-test/suite/rpl/r/rpl_row_max_relay_size.result:
Updated results
mysql-test/suite/rpl/r/rpl_row_show_relaylog_events.result:
Updated results after improved RESET SLAVE (we now use less relay log files)
mysql-test/suite/rpl/r/rpl_skip_replication.result:
New error message
mysql-test/suite/rpl/r/rpl_start_slave_deadlock_sys_vars.result:
Test removed as the old DBUG_SYNC entries doesn't exist anymore
mysql-test/suite/rpl/r/rpl_stm_max_relay_size.result:
Updated results
mysql-test/suite/rpl/r/rpl_stm_mix_show_relaylog_events.result:
Updated results after improved RESET SLAVE (we now use less relay log files)
mysql-test/suite/rpl/t/rpl_flush_logs.test:
Updated tests as relay log files is created a bit differently than before
mysql-test/suite/rpl/t/rpl_start_slave_deadlock_sys_vars.test:
Test removed as the old DBUG_SYNC entries doesn't exist anymore
mysql-test/suite/sys_vars/r/default_master_connection_basic.result:
New test to test usage of default_master_connection
mysql-test/suite/sys_vars/r/max_relay_log_size_basic.result:
Updated results
mysql-test/suite/sys_vars/r/sql_slave_skip_counter_basic.result:
Updated usage of sql_slave_skip_counter
mysql-test/suite/sys_vars/t/default_master_connection_basic.test:
New test to test usage of default_master_connection
mysql-test/suite/sys_vars/t/max_relay_log_size_basic.test:
Updated results
mysql-test/suite/sys_vars/t/sql_slave_skip_counter_basic.test:
Updated test for multi-source
mysql-test/t/flush.test:
Added test for new syntax of flush relay logs (can't repeat relay logs or slave)
mysql-test/t/parser.test:
Updated test as master_pos_wait() now takes more arguments than before
mysys/mf_fn_ext.c:
Added fn_ext2(), which returns pointer to last '.' in file name
plugin/semisync/semisync_master_plugin.cc:
Use SHOW_SIMPLE_FUNC to optimize SHOW STATUS
sql/event_scheduler.cc:
No reason to initialize slave_thread (it's guaranteed to be zero here)
sql/item_create.cc:
Added connection_name argument to master_pos_wait()
Simplified code
sql/item_func.cc:
Added connection_name argument to master_pos_wait()
sql/item_func.h:
Added connection_name argument to master_pos_wait()
sql/lex.h:
Added SLAVES keyword
sql/log.cc:
Added tag "Master 'connection_name'" to slave errors that has a connection name.
Added parameter to reset_logs() so that one can specify if new logs should be created.
Removed some wrong casts
Changed some constants to defines
sql/log.h:
Added parameter to reset_logs()
Updated comment to reflect new code
sql/log_event.cc:
Updated DBUG_PRINT
sql/mysqld.cc:
Added variable mysqld_server_initialized so that other functions can test if server is fully initialized.
Free all slave data in one place (fewer ifdef's)
Removed not needed call to close_active_mi()
Initialize slaves() later in startup to ensure that everthing is really initialized when slaves start.
Made status variable slave_running multi-source safe
max_relay_log_size copies it's values from max_binlog_size at startup
SHOW_FUNC -> SHOW_SIMPLE_FUNC
sql/mysqld.h:
Added mysqld_server_initialized
Removed max_relay_log_size
sql/rpl_mi.cc:
Store connection name and cmp_connection_name (only used for show full slave status) in Master_info
Added code for Master_info_index, which handles storage of multi-master information
Don't write the empty "" connection_name to multi-master.info file. This is handled by the original code.
Create Master_info_index::index_file_names once at init
More DBUG_PRINT
Give error if Master_info_index::check_duplicate_master_info fails
Added start|stop all slaves
sql/rpl_mi.h:
Added connection_name and Master_info_index
Updated prototypes
sql/rpl_rli.cc:
Added connection_name to relay log files.
If we do a full reset, don't create any new relay log files.
Updated comment to reflect new code
Made max_relay_log_size depending on master connection.
sql/rpl_rli.h:
Fixed type of slave_skip_counter as we now access it directly in sys_vars.cc, so it must be ulong
Made executed_entries and max_relay_log_size depending on master connection.
sql/set_var.cc:
Fixed that one can get variable name also when one uses DEFAULT
sql/set_var.h:
Made option global so that one can check and change min & max values (sorry Sergei)
sql/share/errmsg-utf8.txt:
Added new error messages needed for multi-source
Added multi-source name to error ER_MASTER_INFO and WARN_NO_MASTER_INFO
Improved error message if connection exists
sql/slave.cc:
Moved things a bit around to make it easier to handle error conditions.
Create a global master_info_index and add the "" connection to it
Ensure that new Master_info doesn't fail.
Don't call terminate_slave_threads(active_mi..) on end_slave() as this is now done automaticly when deleting master_info_index.
Delete not needed function close_active_mi(). One can achive same thing by calling end_slave().
Added support for SHOW FULL SLAVE STATUS (show status for all master connections with connection_name as first column)
Removed logging of "next log '%s' is currently active | not active"
Added Slave_received_heartbeats and Slave_heartbeat_period
sql/slave.h:
Added new defines and prototypes
sql/sql_base.cc:
More DBUG_PRINT
sql/sql_class.cc:
Reset thd->connection_name and thd-->default_master_connection
sql/sql_class.h:
Added thd->connection_name and thd-->default_master_connection
Made slave_skip_count and max_relay_log_size depending on master connection. These variables are in THD to make changing them thread safe.
sql/sql_const.h:
Added MAX_CONNECTION_NAME
sql/sql_insert.cc:
thd->slave_thread -> thd->rli_slave
Removed usage of active_mi
sql/sql_lex.cc:
Reset 'lex->verbose' (to simplify some sql_yacc.yy code)
sql/sql_lex.h:
Added connection_name, relay_log_connection_name, SQLCOM_SLAVE_ALL_START and SQLCOM_SLAVE_ALL_STOP
sql/sql_load.cc:
thd->slave_thread -> thd->rli_slave
Removed usage of active_mi
sql/sql_parse.cc:
Added support for connection_name to all SLAVE commands.
- Instead of using active_mi, we now get the current Master_info from master_info_index.
- Create new replication threads with CHANGE MASTER
- Added support for show_all_master_info()-
sql/sql_prepare.cc:
Added SQLCOM_SLAVE_ALL_START and SQLCOM_SLAVE_ALL_STOP
sql/sql_reload.cc:
Made reset/full slave use master_info_index->get_master_info() instead of active_mi.
If one uses 'RESET SLAVE "connection_name" all' the connection is removed from master_info_index.
Fixed issues with FLUSH RELAY LOGS
sql/sql_repl.cc:
sql_slave_skip_counter is moved to thd->variables to make it thread safe and fix some bugs with it
Add connection name to relay log files.
Added connection name to errors.
Added some logging for multi-master if log_warnings > 1
stop_slave():
- Don't check if thd is set. It's guaranteed to always be set.
change_master():
- Check for duplicate connection names in change_master()
- Check for wrong arguments first in file (to simplify error handling)
- Register new connections in master_info_index
******
Added multi-source support to show relaylog events
******
check_duplicate_master_info() now generates an error
Added parameter to reset_logs()
******
Updated calls to create_signed_file_name()
sql/sql_show.cc:
Check wildcard match as early as possible for SHOW STATUS. This makes SHOW STATUS like 'xxx' a lot faster and use less mutex
sql/sql_yacc.yy:
Added optional connection_name to a all relevant master/slave commands
Added multi-source support to show relaylog events
Added new commands START ALL SLAVES, STOP ALL SLAVES and SHOW FULL SLAVE STATUS
sql/strfunc.cc:
my_global.h shoud always be included first.
sql/sys_vars.cc:
Added variable default_master_connection
Made variable sql_slave_skip_counter multi-source safe
Made max_relay_log_size depending on master connection.
Made old code more reusable
sql/sys_vars.h:
Added Sys_var_session_lexstring (needed for default_master_connection)
Added Sys_var_multi_source_uint (needed for sql_slave_skip_counter).
Changed Sys_var_multi_source_uint to ulong to be able to handle max_relay_log_size
Made old code more reusable
storage/example/ha_example.cc:
Use SHOW_SIMPLE_FUNC to optimize SHOW STATUS
storage/sphinx/ha_sphinx.cc:
Use SHOW_SIMPLE_FUNC to optimize SHOW STATUS
storage/xtradb/handler/ha_innodb.cc:
Don't store replication position if innobase_overwrite_relay_log_info is not set
strings/my_vsnprintf.c:
Fixed bug when using positional parameters with length
This allows us to avoid calculating variables (including those involving mutex) that doesn't match the given
wildcard in SHOW STATUS LIKE '...'
Removed all references to active_mi that could cause problems for multi-source replication.
Added START|STOP ALL SLAVES
Added SHOW ALL SLAVES STATUS
include/mysql/plugin.h:
Added SHOW_SIMPLE_FUNC
include/mysql/plugin_audit.h.pp:
Updated .pp file
include/mysql/plugin_auth.h.pp:
Updated .pp file
include/mysql/plugin_ftparser.h.pp:
Updated .pp file
mysql-test/suite/multi_source/info_logs.result:
New columns in SHOW ALL SLAVES STATUS
mysql-test/suite/multi_source/info_logs.test:
Test new syntax
mysql-test/suite/multi_source/simple.result:
New columns in SHOW ALL SLAVES STATUS
mysql-test/suite/multi_source/simple.test:
test new syntax
mysql-test/suite/multi_source/syntax.result:
Updated result
mysql-test/suite/multi_source/syntax.test:
Test new syntax
mysql-test/suite/rpl/r/rpl_skip_replication.result:
Updated result
plugin/semisync/semisync_master_plugin.cc:
SHOW_FUNC -> SHOW_SIMPLE_FUNC
sql/item_create.cc:
Simplify code
sql/lex.h:
Added SLAVES keyword
sql/log.cc:
Constant -> define
sql/log_event.cc:
Added comment
sql/mysqld.cc:
SHOW_FUNC -> SHOW_SIMPLE_FUNC
Made slave_retried_trans, slave_received_heartbeats and heartbeat_period multi-source safe
Clear variable denied_connections and slave_retried_transactions on startup
sql/mysqld.h:
Added slave_retried_transactions
sql/rpl_mi.cc:
create_signed_file_name -> create_logfile_name_with_suffix
Added start_all_slaves() and stop_all_slaves()
sql/rpl_mi.h:
Added prototypes
sql/rpl_rli.cc:
create_signed_file_name -> create_logfile_name_with_suffix
added executed_entries
sql/rpl_rli.h:
Added executed_entries
sql/share/errmsg-utf8.txt:
More and better error messages
sql/slave.cc:
Added more fields to SHOW ALL SLAVES STATUS
Added slave_retried_transactions
Changed constants -> defines
sql/sql_class.h:
Added comment
sql/sql_insert.cc:
active_mi.rli -> thd->rli_slave
sql/sql_lex.h:
Added SQLCOM_SLAVE_ALL_START & SQLCOM_SLAVE_ALL_STOP
sql/sql_load.cc:
active_mi.rli -> thd->rli_slave
sql/sql_parse.cc:
Added START|STOP ALL SLAVES
sql/sql_prepare.cc:
Added SQLCOM_SLAVE_ALL_START & SQLCOM_SLAVE_ALL_STOP
sql/sql_reload.cc:
Made REFRESH RELAY LOG multi-source safe
sql/sql_repl.cc:
create_signed_file_name -> create_logfile_name_with_suffix
Don't send my_ok() from start_slave() or stop_slave() so that we can call it for all master connections
sql/sql_show.cc:
Compare wild cards early for all variables
sql/sql_yacc.yy:
Added START|STOP ALL SLAVES
Added SHOW ALL SLAVES STATUS
sql/sys_vars.cc:
Made replicate_events_marked_for_skip,slave_net_timeout and rpl_filter multi-source safe.
sql/sys_vars.h:
Simplify Sys_var_rpl_filter
- Don't abort if plugin table exists
- Use longer timeout for start/stop of mysqld
debian/dist/Debian/mariadb-server-5.5.postinst:
Don't abort if plugin table exists
debian/mariadb-server-5.5.mysql.init:
Use longer timeout for start/stop of mysqld
Check ability of index to be NULL as it made in MyISAM. UNIQUE with NULL could have several NULL entries so we have to continue even if ve have found a row.
Do not include mytop in mariadb-client-5.5 .deb package.
There is already a Debian mytop package, so we get a package conflict.
And there is no reason for the MariaDB project to guerrilla-take-over
mytop maintenance.
Changed names of multi-source log files so that original suffixes are kept.
include/my_sys.h:
Added fn_ext2(), which returns pointer to last '.' in file name
mysql-test/extra/rpl_tests/rpl_max_relay_size.test:
Updated test
mysql-test/suite/multi_source/info_logs-master.opt:
Test with strange file names
mysql-test/suite/multi_source/info_logs.result:
Updated results
mysql-test/suite/multi_source/info_logs.test:
Changed to test with complex names to be able to verify the filename generator code
mysql-test/suite/multi_source/relaylog_events.result:
Updated results
mysql-test/suite/multi_source/reset_slave.result:
Updated results
mysql-test/suite/multi_source/skip_counter.result:
Updated results
mysql-test/suite/multi_source/skip_counter.test:
Added testing of max_relay_log_size
mysql-test/suite/rpl/r/rpl_row_max_relay_size.result:
Updated results
mysql-test/suite/rpl/r/rpl_stm_max_relay_size.result:
Updated results
mysql-test/suite/sys_vars/r/max_relay_log_size_basic.result:
Updated results
mysql-test/suite/sys_vars/t/max_relay_log_size_basic.test:
Updated results
mysys/mf_fn_ext.c:
Added fn_ext2(), which returns pointer to last '.' in file name
sql/log.cc:
Removed some wrong casts
sql/log.h:
Updated comment to reflect new code
sql/log_event.cc:
Updated DBUG_PRINT
sql/mysqld.cc:
Added that max_relay_log_size copies it's values from max_binlog_size
sql/mysqld.h:
Removed max_relay_log_size
sql/rpl_mi.cc:
Changed names of multi-source log files so that original suffixes are kept.
sql/rpl_mi.h:
Updated prototype
sql/rpl_rli.cc:
Updated comment to reflect new code
Made max_relay_log_size depending on master connection.
sql/rpl_rli.h:
Made max_relay_log_size depending on master connection.
sql/set_var.h:
Made option global so that one can check and change min & max values (sorry Sergei)
sql/sql_class.h:
Made max_relay_log_size depending on master connection.
sql/sql_repl.cc:
Updated calls to create_signed_file_name()
sql/sys_vars.cc:
Made max_relay_log_size depending on master connection.
Made old code more reusable
sql/sys_vars.h:
Changed Sys_var_multi_source_uint to ulong to be able to handle max_relay_log_size
Made old code more reusable
In some rare cases when the value of the system variable join_buffer_size
was set to a number less than 256 the function JOIN_CACHE::set_constants
determined the size of an offset in the join buffer equal to 1 though
the minimal join buffer required more than 256 bytes. This could cause
a crash of the server when records from the join buffer were read.
- Added parameter to reset_logs() so that one can specify if new logs should be created.
mysql-test/include/setup_fake_relay_log.inc:
There is no orphan relay log files anymore
mysql-test/mysql-test-run.pl:
Added multi_source to test suite
mysql-test/suite/multi_source/info_logs.result:
New test
mysql-test/suite/multi_source/info_logs.test:
New test
mysql-test/suite/multi_source/my.cnf:
Added log-warnings to get more information to the log files
mysql-test/suite/multi_source/relaylog_events.result:
Added cleanup
mysql-test/suite/multi_source/relaylog_events.test:
Added cleanup
mysql-test/suite/multi_source/reset_slave.result:
Updated results after improved RESET SLAVE
mysql-test/suite/multi_source/simple.result:
Updated results after improved RESET SLAVE
mysql-test/suite/multi_source/simple.test:
Syncronize positions before show full slave status
mysql-test/suite/rpl/r/rpl_row_show_relaylog_events.result:
Updated results after improved RESET SLAVE (we now use less relay log files)
mysql-test/suite/rpl/r/rpl_stm_mix_show_relaylog_events.result:
Updated results after improved RESET SLAVE (we now use less relay log files)
sql/log.cc:
Added parameter to reset_logs() so that one can specify if new logs should be created.
sql/log.h:
Added parameter to reset_logs()
sql/rpl_mi.cc:
Create Master_info_index::index_file_names once at init
More DBUG_PRINT
Give error if Master_info_index::check_duplicate_master_info fails
sql/rpl_rli.cc:
If we do a full reset, don't create any new relay log files.
sql/share/errmsg-utf8.txt:
Improved error message if connection exists
sql/sql_parse.cc:
Fixed memory leak
sql/sql_repl.cc:
check_duplicate_master_info() now generates an error
Added parameter to reset_logs()
Documentation of the feature can be found at: http://kb.askmonty.org/en/multi-source-replication/
This code is based on code from Taobao, developed by Plinux
BUILD/SETUP.sh:
Added -Wno-invalid-offsetof to get rid of warning of offsetof() on C++ class (safe in the contex we use it)
client/mysqltest.cc:
Added support for error names starting with 'W'
Added connection_name support to --sync_with_master
cmake/maintainer.cmake:
Added -Wno-invalid-offsetof to get rid of warning of offsetof() on C++ class (safe in the contex we use it)
mysql-test/r/mysqltest.result:
Updated results
mysql-test/r/parser.result:
Updated results
mysql-test/suite/multi_source/my.cnf:
Setup of multi-master tests
mysql-test/suite/multi_source/simple.result:
Simple basic test of multi-source functionality
mysql-test/suite/multi_source/simple.test:
Simple basic test of multi-source functionality
mysql-test/suite/multi_source/syntax.result:
Test of multi-source syntax
mysql-test/suite/multi_source/syntax.test:
Test of multi-source syntax
mysql-test/suite/rpl/r/rpl_rotate_logs.result:
Updated results because of new error messages
mysql-test/t/parser.test:
Updated test as master_pos_wait() now takes more arguments than before
sql/event_scheduler.cc:
No reason to initialize slave_thread (it's guaranteed to be zero here)
sql/item_create.cc:
Added connection_name argument to master_pos_wait()
Simplified code
sql/item_func.cc:
Added connection_name argument to master_pos_wait()
sql/item_func.h:
Added connection_name argument to master_pos_wait()
sql/log.cc:
Added tag "Master 'connection_name'" to slave errors that has a connection name.
sql/mysqld.cc:
Added variable mysqld_server_initialized so that other functions can test if server is fully initialized.
Free all slave data in one place (fewer ifdef's)
Removed not needed call to close_active_mi()
Initialize slaves() later in startup to ensure that everthing is really initialized when slaves start.
Made status variable slave_running multi-source safe
sql/mysqld.h:
Added mysqld_server_initialized
sql/rpl_mi.cc:
Store connection name and cmp_connection_name (only used for show full slave status) in Master_info
Added code for Master_info_index, which handles storage of multi-master information
Don't write the empty "" connection_name to multi-master.info file. This is handled by the original code.
sql/rpl_mi.h:
Added connection_name and Master_info_index
sql/rpl_rli.cc:
Added connection_name to relay log files.
sql/rpl_rli.h:
Fixed type of slave_skip_counter as we now access it directly in sys_vars.cc, so it must be uint
sql/share/errmsg-utf8.txt:
Added new error messages needed for multi-source
Added multi-source name to error ER_MASTER_INFO and WARN_NO_MASTER_INFO
sql/slave.cc:
Moved things a bit around to make it easier to handle error conditions.
Create a global master_info_index and add the "" connection to it
Ensure that new Master_info doesn't fail.
Don't call terminate_slave_threads(active_mi..) on end_slave() as this is now done automaticly when deleting master_info_index.
Delete not needed function close_active_mi(). One can achive same thing by calling end_slave().
Added support for SHOW FULL SLAVE STATUS (show status for all master connections with connection_name as first column)
sql/slave.h:
Added new prototypes
sql/sql_base.cc:
More DBUG_PRINT
sql/sql_class.cc:
Reset thd->connection_name and thd-->default_master_connection
sql/sql_class.h:
Added thd->connection_name and thd-->default_master_connection
Added slave_skip_count to variables to make changing the @@sql_slave_skip_count variable thread safe
sql/sql_const.h:
Added MAX_CONNECTION_NAME
sql/sql_lex.cc:
Reset 'lex->verbose' (to simplify some sql_yacc.yy code)
sql/sql_lex.h:
Added connection_name
sql/sql_parse.cc:
Added support for connection_name to all SLAVE commands.
- Instead of using active_mi, we now get the current Master_info from master_info_index.
- Create new replication threads with CHANGE MASTER
- Added support for show_all_master_info()
sql/sql_reload.cc:
Made reset/full slave use master_info_index->get_master_info() instead of active_mi.
If one uses 'RESET SLAVE "connection_name" all' the connection is removed from master_info_index.
sql/sql_repl.cc:
sql_slave_skip_counter is moved to thd->variables to make it thread safe and fix some bugs with it
Add connection name to relay log files.
Added connection name to errors.
Added some logging for multi-master if log_warnings > 1
stop_slave():
- Don't check if thd is set. It's guaranteed to always be set.
change_master():
- Check for duplicate connection names in change_master()
- Check for wrong arguments first in file (to simplify error handling)
- Register new connections in master_info_index
sql/sql_yacc.yy:
Added optional connection_name to a all relevant master/slave commands
sql/strfunc.cc:
my_global.h shoud always be included first.
sql/sys_vars.cc:
Added variable default_master_connection
Made variable sql_slave_skip_counter multi-source safe
sql/sys_vars.h:
Added Sys_var_session_lexstring (needed for default_master_connection)
Added Sys_var_multi_source_uint (needed for sql_slave_skip_counter).
- Don't connect right away in ha_cassandra::open. If we do this, it becomes
impossible to do SHOW CREATE TABLE when the server is not present.
- Note: CREATE TABLE still requires that connection is present, as it needs
to check whether the specified DDL can be used with Cassandra. We could
delay that check also, but then one would not be able to find out about
errors in table DDL until they do a SELECT.
The feature was backported from MySQL 5.6.
Some code was added to make commands as
SELECT * FROM ignored_db.t1;
CALL ignored_db.proc();
USE ignored_db;
to take that option into account.
per-file comments:
mysql-test/r/ignore_db_dirs_basic.result
test result added.
mysql-test/t/ignore_db_dirs_basic-master.opt
options for the test,
actually the set of --ignore-db-dir lines.
mysql-test/t/ignore_db_dirs_basic.test
test for the feature.
Same test from 5.6 was taken as a basis,
then tests for SELECT, CALL etc were added.
per-file comments:
sql/mysql_priv.h
MDEV-495 backport --ignore-db-dir.
interface for db_name_is_in_ignore_list() added.
sql/mysqld.cc
MDEV-495 backport --ignore-db-dir.
--ignore-db-dir handling.
sql/set_var.cc
MDEV-495 backport --ignore-db-dir.
the @@ignore_db_dirs variable added.
sql/sql_show.cc
MDEV-495 backport --ignore-db-dir.
check if the directory is ignored.
sql/sql_show.h
MDEV-495 backport --ignore-db-dir.
interface added for opt_ignored_db_dirs.
sql/table.cc
MDEV-495 backport --ignore-db-dir.
check if the directory is ignored.
