In RBR, DDL statement will change binlog format to non row-based
format before it is binlogged, but the binlog format was not be
restored, and then manipulating a temporary table can not reset binlog
format to row-based format rightly. So that the manipulated statement
is binlogged with statement-based format.
To fix the problem, restore the state of binlog format after the DDL
statement is binlogged.
Conflicts:
Text conflict in .bzr-mysql/default.conf
Text conflict in mysql-test/suite/rpl/r/rpl_loaddata_fatal.result
Text conflict in mysql-test/suite/rpl/r/rpl_stm_log.result
Text conflict in mysql-test/t/mysqlbinlog.test
Text conflict in sql/sql_acl.cc
Text conflict in sql/sql_servers.cc
Text conflict in sql/sql_update.cc
Text conflict in support-files/mysql.spec.sh
In certain rare cases when a process was interrupted
during a FLUSH PRIVILEGES operation the diagnostic
area would be set to an error state but the function
responsible for the operation would still signal
success. This would lead to a debug assertion error
later on when the server would attempt to reset the
DA before sending the error message.
This patch fixes the issue by assuring that
reload_acl_and_cache() always fails if an error
condition is raised.
The second issue was that a KILL could cause
a console error message which referred to a DA
state without first making sure that such a
state existed.
This patch fixes this issue in two different
palces by first checking DA state before
fetching the error message.
Conflicts:
Text conflict in .bzr-mysql/default.conf
Text conflict in mysql-test/extra/rpl_tests/rpl_loaddata.test
Text conflict in mysql-test/r/mysqlbinlog2.result
Text conflict in mysql-test/suite/binlog/r/binlog_stm_mix_innodb_myisam.result
Text conflict in mysql-test/suite/binlog/r/binlog_unsafe.result
Text conflict in mysql-test/suite/rpl/r/rpl_insert_id.result
Text conflict in mysql-test/suite/rpl/r/rpl_loaddata.result
Text conflict in mysql-test/suite/rpl/r/rpl_stm_auto_increment_bug33029.result
Text conflict in mysql-test/suite/rpl/r/rpl_udf.result
Text conflict in mysql-test/suite/rpl/t/rpl_slow_query_log.test
Text conflict in sql/field.h
Text conflict in sql/log.cc
Text conflict in sql/log_event.cc
Text conflict in sql/log_event_old.cc
Text conflict in sql/mysql_priv.h
Text conflict in sql/share/errmsg.txt
Text conflict in sql/sp.cc
Text conflict in sql/sql_acl.cc
Text conflict in sql/sql_base.cc
Text conflict in sql/sql_class.h
Text conflict in sql/sql_db.cc
Text conflict in sql/sql_delete.cc
Text conflict in sql/sql_insert.cc
Text conflict in sql/sql_lex.cc
Text conflict in sql/sql_lex.h
Text conflict in sql/sql_load.cc
Text conflict in sql/sql_table.cc
Text conflict in sql/sql_update.cc
Text conflict in sql/sql_view.cc
Conflict adding files to storage/innobase. Created directory.
Conflict because storage/innobase is not versioned, but has versioned children. Versioned directory.
Conflict adding file storage/innobase. Moved existing file to storage/innobase.moved.
Conflict adding files to storage/innobase/handler. Created directory.
Conflict because storage/innobase/handler is not versioned, but has versioned children. Versioned directory.
Contents conflict in storage/innobase/handler/ha_innodb.cc
Conflicts:
Conflict adding files to server-tools. Created directory.
Conflict because server-tools is not versioned, but has versioned children. Versioned directory.
Conflict adding files to server-tools/instance-manager. Created directory.
Conflict because server-tools/instance-manager is not versioned, but has versioned children. Versioned directory.
Contents conflict in server-tools/instance-manager/instance_map.cc
Contents conflict in server-tools/instance-manager/listener.cc
Contents conflict in server-tools/instance-manager/options.cc
Contents conflict in server-tools/instance-manager/user_map.cc
Bug#16565 mysqld --help --verbose does not order variablesBug#20413 sql_slave_skip_counter is not shown in show variables
Bug#20415 Output of mysqld --help --verbose is incomplete
Bug#25430 variable not found in SELECT @@global.ft_max_word_len;
Bug#32902 plugin variables don't know their names
Bug#34599 MySQLD Option and Variable Reference need to be consistent in formatting!
Bug#34829 No default value for variable and setting default does not raise error
Bug#34834 ? Is accepted as a valid sql mode
Bug#34878 Few variables have default value according to documentation but error occurs
Bug#34883 ft_boolean_syntax cant be assigned from user variable to global var.
Bug#37187 `INFORMATION_SCHEMA`.`GLOBAL_VARIABLES`: inconsistent status
Bug#40988 log_output_basic.test succeeded though syntactically false.
Bug#41010 enum-style command-line options are not honoured (maria.maria-recover fails)
Bug#42103 Setting key_buffer_size to a negative value may lead to very large allocations
Bug#44691 Some plugins configured as MYSQL_PLUGIN_MANDATORY in can be disabled
Bug#44797 plugins w/o command-line options have no disabling option in --help
Bug#46314 string system variables don't support expressions
Bug#46470 sys_vars.max_binlog_cache_size_basic_32 is broken
Bug#46586 When using the plugin interface the type "set" for options caused a crash.
Bug#47212 Crash in DBUG_PRINT in mysqltest.cc when trying to print octal number
Bug#48758 mysqltest crashes on sys_vars.collation_server_basic in gcov builds
Bug#49417 some complaints about mysqld --help --verbose output
Bug#49540 DEFAULT value of binlog_format isn't the default value
Bug#49640 ambiguous option '--skip-skip-myisam' (double skip prefix)
Bug#49644 init_connect and \0
Bug#49645 init_slave and multi-byte characters
Bug#49646 mysql --show-warnings crashes when server dies
Bug#35589 SET PASSWORD caused a crash
Bug#35591 FLUSH PRIVILEGES caused a crash
A race condition on the privilege hash tables (proc_priv_hash
and func_priv_hash) caused one thread to try to delete elements
that had already been deleted by another thread.
The bug was caused by reading and saving the pointers to
the hash tables outside mutex protection. This led to an
inconsistency where a thread copied a pointer to a hash,
another thread did the same, the first thread then deleted
the hash, and the second then crashed when it in turn tried to
delete the deleted hash.
The fix is to ensure that operations on the shared hash structures
happens under mutex protection (moving the locking up a little)
The problem is a somewhat common misusage of the strmake function.
The strmake(dst, src, len) function writes at most /len/ bytes to
the string pointed to by src, not including the trailing null byte.
Hence, if /len/ is the exact length of the destination buffer, a
one byte buffer overflow can occur if the length of the source
string is equal to or greater than /len/.
Bug#35591 FLUSH PRIVILEGES caused a crash
A race condition on the privilege hash tables (proc_priv_hash
and func_priv_hash) caused one thread to try to delete elements
that had already been deleted by another thread.
The bug was caused by reading and saving the pointers to
the hash tables outside mutex protection. This led to an
inconsistency where a thread copied a pointer to a hash,
another thread did the same, the first thread then deleted
the hash, and the second then crashed when it in turn tried to
delete the deleted hash.
The fix is to ensure that operations on the shared hash structures
happens under mutex protection (moving the locking up a little)
{PROCEDURE|FUNCTION} FROM ...'
The master would hit an assertion when binary log was
active. This was due to the fact that the thread's diagnostics
area was being cleared before writing to the binlog,
independently of mysql_routine_grant returning an error or
not. When mysql_routine_grant was to return an error, the return
value and the diagnostics area contents would
mismatch. Consequently, neither my_ok would be called nor an
error would be signaled in the diagnostics area, eventually
triggering the assertion in net_end_statement.
We fix this by not clearing the diagnostics area at binlogging
time.
----------------------------------------------------------------------
ChangeSet@1.2571, 2008-04-08 12:30:06+02:00, vvaintroub@wva. +122 -0
Bug#32082 : definition of VOID in my_global.h conflicts with Windows
SDK headers
VOID macro is now removed. Its usage is replaced with void cast.
In some cases, where cast does not make much sense (pthread_*, printf,
hash_delete, my_seek), cast is ommited.
This is the non-ndb part of the patch.
The return value of mysql_bin_log.write was ignored by most callers,
which may lead to inconsistent on master and slave if the transaction
was committed while the binlog was not correctly written. If
my_error() is call in mysql_bin_log.write, this could also lead to
assertion issue if my_ok() or my_error() is called after.
This fixed the problem by let the caller to check and handle the
return value of mysql_bin_log.write. This patch only adresses the
simple cases.
The problem is that the server could crash when attempting
to access a non-conformant proc system table. One such case
was a crash when invoking stored procedure related statements
on a 5.1 server with a proc system table in the 5.0 format.
The solution is to validate the proc system table format
before attempts to access it are made. If the table is not
in the format that the server expects, a message is written
to the error log and the statement that caused the table to
be accessed fails.
port from mysql-next (5.4) to mysql-next-mr-bugfixing (5.5/5.6?)
2755 Konstantin Osipov 2008-11-27
Bug#32115 will remove the pre-requisite to initialize LEX to open tables.
This dependency was added in 5.1 and was supposed to be removed in 6.0.
Remove asserts and initialization of LEX in places where we don't deal
with partitioned tables.
Non-transactional updates that take place inside a transaction present problems
for logging because they are visible to other clients before the transaction
is committed, and they are not rolled back even if the transaction is rolled
back. It is not always possible to log correctly in statement format when both
transactional and non-transactional tables are used in the same transaction.
In the current patch, we ensure that such scenario is completely safe under the
ROW and MIXED modes.
CURRENT_USER() in GRANT ... TO CURRENT_USER() only gave us a definer,
not a full user (i.e., password-element was not initiliazed). Hence
dereferencing the password led to a crash.
Properly initializes definers now, just so there are no misunderstandings.
Also does some magic so IDENTIFIED BY ... works with CURRENT_USER().
Problem 1:
column_priv_hash uses utf8_general_ci collation
for the key comparison. The key consists of user name,
db name and table name. Thus user with privileges on table t1
is able to perform the same operation on T1
(the similar situation with user name & db name, see acl_cache).
So collation which is used for column_priv_hash and acl_cache
should be case sensitive.
The fix:
replace system_charset_info with my_charset_utf8_bin for
column_priv_hash and acl_cache
Problem 2:
The same situation with proc_priv_hash, func_priv_hash,
the only difference is that Routine name is case insensitive.
So the fix is to use my_charset_utf8_bin for
proc_priv_hash & func_priv_hash and convert routine name into lower
case before writing the element into the hash and
before looking up the key.
Additional fix: mysql.procs_priv Routine_name field collation
is changed to utf8_general_ci.
It's necessary for REVOKE command
(to find a field by routine hash element values).
Note:
It's safe for lower-case-table-names mode too because
db name & table name are converted into lower case
(see GRANT_NAME::GRANT_NAME).
2630.39.1, 2630.28.29, 2630.34.3, 2630.34.2, 2630.34.1, 2630.29.29,
2630.29.28, 2630.31.1, 2630.28.13, 2630.28.10, 2617.23.14 and
some other minor revisions.
This patch implements:
WL#4264 "Backup: Stabilize Service Interface" -- all the
server prerequisites except si_objects.{h,cc} themselves (they can
be just copied over, when needed).
WL#4435: Support OUT-parameters in prepared statements.
(and all issues in the initial patches for these two
tasks, that were discovered in pushbuild and during testing).
Bug#39519: mysql_stmt_close() should flush all data
associated with the statement.
After execution of a prepared statement, send OUT parameters of the invoked
stored procedure, if any, to the client.
When using the binary protocol, send the parameters in an additional result
set over the wire. When using the text protocol, assign out parameters to
the user variables from the CALL(@var1, @var2, ...) specification.
The following refactoring has been made:
- Protocol::send_fields() was renamed to Protocol::send_result_set_metadata();
- A new Protocol::send_result_set_row() was introduced to incapsulate
common functionality for sending row data.
- Signature of Protocol::prepare_for_send() was changed: this operation
does not need a list of items, the number of items is fully sufficient.
The following backward incompatible changes have been made:
- CLIENT_MULTI_RESULTS is now enabled by default in the client;
- CLIENT_PS_MULTI_RESUTLS is now enabled by default in the client.
