POSIX requires that a signal handler defined with sigaction()
is not reset on delivering a signal unless SA_NODEFER or
SA_RESETHAND is set. It is therefore unnecessary to redefine
the handler on signal delivery on platforms where sigaction()
is used without those flags.
include/my_alarm.h:
Renamed DONT_REMEMBER_SIGNAL ->
SIGNAL_HANDLER_RESET_ON_DELIVERY.
include/my_global.h:
Renamed DONT_REMEMBER_SIGNAL ->
SIGNAL_HANDLER_RESET_ON_DELIVERY. The latter is now defined
only on non-BSD platforms missing the POSIX sigaction()
function.
libmysql/libmysql.c:
Renamed DONT_REMEMBER_SIGNAL ->
SIGNAL_HANDLER_RESET_ON_DELIVERY
mysys/thr_alarm.c:
Renamed DONT_REMEMBER_SIGNAL ->
SIGNAL_HANDLER_RESET_ON_DELIVERY
sql/mysqld.cc:
Renamed DONT_REMEMBER_SIGNAL ->
SIGNAL_HANDLER_RESET_ON_DELIVERY
strict aliasing violations.
Essentially, the problem is that large parts of the server were
developed in simpler times (last decades, pre C99 standard) when
strict aliasing and compilers supporting such optimizations were
rare to non-existent. Thus, when compiling the server with a modern
compiler that uses strict aliasing rules to perform optimizations,
there are several places in the code that might trigger undefined
behavior.
As evinced by some recent bugs, GCC does a somewhat good of job
misoptimizing such code, but on the other hand also gives warnings
about suspicious code. One problem is that the warnings aren't
always accurate, yet we can't afford to just shut them off as we
might miss real cases. False-positive cases are aggravated mostly
by casts that are likely to trigger undefined behavior.
The solution is to start a cleanup process focused on fixing and
reducing the amount of strict-aliasing related warnings produced
by GCC and others compilers. A good deal of noise reduction can
be achieved by just removing useless casts that are product of
historical cruft and are likely to trigger undefined behavior if
dereferenced.
client/mysql.cc:
Remove now-unnecessary casts.
Break up large strings.
client/mysql_upgrade.c:
Remove now-unnecessary casts.
client/mysqladmin.cc:
Remove now-unnecessary casts.
Break up large strings.
client/mysqlbinlog.cc:
Remove now-unnecessary casts.
client/mysqlcheck.c:
Remove now-unnecessary casts.
client/mysqldump.c:
Remove now-unnecessary casts.
client/mysqlimport.c:
Remove now-unnecessary casts.
client/mysqlshow.c:
Remove now-unnecessary casts.
client/mysqlslap.c:
Remove now-unnecessary casts.
client/mysqltest.cc:
Remove now-unnecessary casts.
extra/comp_err.c:
Remove now-unnecessary casts.
extra/my_print_defaults.c:
Remove now-unnecessary casts.
Break up large strings.
extra/mysql_waitpid.c:
Remove now-unnecessary casts.
extra/perror.c:
Remove now-unnecessary casts.
extra/resolve_stack_dump.c:
Remove now-unnecessary casts.
extra/resolveip.c:
Remove now-unnecessary casts.
include/my_getopt.h:
Use a void pointer type as the opaque type to avoid problems with type
incompatibility -- GCC issues warnings when the type name is not type
compatible with a operand. As a side bonus, a explicit cast won't be
necessary anymore.
include/sslopt-longopts.h:
Remove now-unnecessary casts.
Break up large strings.
mysys/my_getopt.c:
Update opaque type and introduce a type definition for the
argument to my_getopt_register_get_addr.
server-tools/instance-manager/options.cc:
Remove now-unnecessary casts.
sql/mysqld.cc:
Remove now-unnecessary casts.
Break up large strings.
Update mysql_getopt_value prototype (the old prototype
was different from the definition anyway).
sql/sql_plugin.cc:
The type of a pointer to a function must be compatible with the
pointed-to function type, otherwise the behavior is undefined.
sql/table.cc:
The variable buf pointer to pointer to pointer to constant char
could improperly alias a incompatible type in call to fix_type_
pointers. Since this was actually dead code, it is simply removed.
sql/unireg.cc:
Remove call to get_form_pos. The code creates a new FRM file which
is always truncated and writes the form position as 0. Hence, no
need to retrieve it, we now for sure it is 0.
storage/archive/archive_reader.c:
Remove now-unnecessary casts.
storage/myisam/ft_nlq_search.c:
Read weight directly from the buffer.
storage/myisam/fulltext.h:
Add explanation about the type duality of a key buffer.
Add accessor macro to retrieve a FT float value.
storage/myisam/mi_test1.c:
Remove now-unnecessary casts.
storage/myisam/myisam_ftdump.c:
Read weight directly from the buffer.
storage/myisam/myisamchk.c:
Remove now-unnecessary casts.
storage/myisam/myisamlog.c:
A pointer to char was used to alias a pointer to pointer to
unsigned char, thus violating strict aliasing rules.
storage/myisam/myisampack.c:
Remove now-unnecessary casts.
strings/decimal.c:
Remove aliasing violation, printing the value is enough for
debugging purposes.
tests/mysql_client_test.c:
Remove now-unnecessary casts.
config/ac-macros/ssl.m4:
Enable yaSSL thread safety if linking with the server or a
thread safe client library. Avoids building a thread safe
yaSSL when only building a non-thread safe client library.
BUILD/*: Add valgrind_configs=--with-valgrind.
BUILD/*: Remove -USAFEMALLOC from valgrind_flags.
configure.in: Add AC_ARG_WITH(valgrind) and HAVE_VALGRIND.
include/my_sys.h: Define a number of MEM_ wrappers for VALGRIND_ functions.
include/my_sys.h: Make TRASH do MEM_UNDEFINED().
include/m_string.h: Remove unused macro bzero_if_purify(A,B).
_mymalloc(): Declare MEM_UNDEFINED() on the allocated memory.
_myfree(): Declare MEM_NOACCESS() on the freed memory.
storage/innobase/include/univ.i: Enable UNIV_DEBUG_VALGRIND based on
HAVE_VALGRIND rather than HAVE_purify.
Possible things to do:
* In my_global.h, remove the defined(HAVE_purify) condition
from the _WIN32 uint3korr().
* In my_global.h *int*korr(), use | instead of +
in order to keep the Valgrind V bits accurate
* Consider replacing HAVE_purify with HAVE_VALGRIND
* Use VALGRIND_CREATE_BLOCK, VALGRIND_DISCARD in mem_root and similar places
The server could be tricked to read packets indefinitely if it
received a packet larger than the maximum size of one packet.
This problem is aggravated by the fact that it can be triggered
before authentication.
The solution is to no skip big packets for non-authenticated
sessions. If a big packet is sent before a session is authen-
ticated, a error is returned and the connection is closed.
include/mysql_com.h:
Add skip flag. Only used in server builds.
sql/net_serv.cc:
Control whether big packets can be skipped.
to cleanup open connections
It was possible to UNINSTALL storage engine plugin when binding
between THD object and storage engine is still active (e.g. in
the middle of transaction).
To avoid unclean deactivation (uninstall) of storage engine plugin
in the middle of transaction, additional storage engine plugin
lock is acquired by thd_set_ha_data().
If ha_data is not null and storage engine plugin was not locked
by thd_set_ha_data() in this connection before, storage engine
plugin gets locked.
If ha_data is null and storage engine plugin was locked by
thd_set_ha_data() in this connection before, storage engine
plugin lock gets released.
If handlerton::close_connection() didn't reset ha_data, server does
it immediately after calling handlerton::close_connection().
Note that this is just a framework fix, storage engines must switch
to thd_set_ha_data() from thd_ha_data() if they want to see fit.
include/mysql/plugin.h:
As thd_{get|set}_ha_data() have some extra logic now, they
must be implemented on server side.
include/mysql/plugin.h.pp:
As thd_{get|set}_ha_data() have some extra logic now, they
must be implemented on server side.
sql/handler.cc:
Make sure ha_data is reset and ha_data lock is released.
sql/handler.h:
hton is not supposed to be updated by ha_lock_engine(),
make it const.
sql/sql_class.cc:
As thd_{get|set}_ha_data() have some extra logic now, they
must be implemented on server side.
sql/sql_class.h:
Added ha_data lock.
Several problems addressed:
1. The maximum value for --open_files_limit on non-windows boxes
is now raised to UINT_MAX (the maximum possible without significant
changes in the code). The maximum value on windows is kept to be
2048 due to a known limitation (bug 24509).
2. mysqld_safe now supports --open_files_limit=xx in addition to
--open-files-limit=xx
3. mysqld_safe always passes through --open[_-]files[_-]limit
to the underlying mysqld. It used to pass it through only if it
the user running the script has access to the root directory or
there was an --user argument specified.
4. Fixed a prototype in my_file.c to match its counterpart in
the other #ifdef branch.
A client doing multiple mysql_library_init() and
mysql_library_end() calls over the lifetime of the process may
experience lost character set data, potentially even a
SIGSEGV.
This patch reinstates the reloading of character set data when
a mysql_library_init() is done after a mysql_library_end().
When compressed myisam files are opened, they are always memory mapped
sometimes causing memory swapping problems.
When we mmap the myisam compressed tables of size greater than the memory
available, the kswapd0 process utilization is very high consuming 30-40% of
the cpu. This happens only with linux kernels older than 2.6.9
With newer linux kernels, we don't have this problem of high cpu consumption
and this option may not be required.
The option 'myisam_mmap_size' is added to limit the amount of memory used for
memory mapping of myisam files. This option is not dynamic.
The default value on 32 bit system is 4294967295 bytes and on 64 bit system it
is 18446744073709547520 bytes.
Note: Testcase only tests the option variable. The actual bug has be to
tested manually.
include/my_global.h:
Fix for Bug #37408 - Compressed MyISAM files should not require/use mmap()
define SIZE_T_MAX
include/myisam.h:
Fix for Bug #37408 - Compressed MyISAM files should not require/use mmap()
declare 'myisam_mmap_size' and 'myisam_mmap_used' variables and the mutex
THR_LOCK_myisam_mmap
myisam/mi_packrec.c:
Fix for Bug #37408 - Compressed MyISAM files should not require/use mmap()
add 'myisam_mmap_size' option which limits the memory available to mmap of
myisam files
myisam/mi_static.c:
Fix for Bug #37408 - Compressed MyISAM files should not require/use mmap()
declare 'myisam_mmap_size' and 'myisam_mmap_used' variables and the mutex
THR_LOCK_myisam_mmap
myisam/myisamdef.h:
Fix for Bug #37408 - Compressed MyISAM files should not require/use mmap()
move MEMMAP_EXTRA_MARGIN to myisam.h so that it can be used in mysqld.cc
mysql-test/r/variables.result:
Fix for Bug #37408 - Compressed MyISAM files should not require/use mmap()
Testcase for BUG#37408 to test the myisam_mmap_size option
mysql-test/t/variables.test:
Fix for Bug #37408 - Compressed MyISAM files should not require/use mmap()
Testcase for BUG#37408 to test the myisam_mmap_size option
mysys/my_thr_init.c:
Fix for Bug #37408 - Compressed MyISAM files should not require/use mmap()
intialize the lock THR_LOCK_myisam_mmap
sql/mysqld.cc:
Fix for Bug #37408 - Compressed MyISAM files should not require/use mmap()
add the 'myisam_mmap_size' option
sql/set_var.cc:
Fix for Bug #37408 - Compressed MyISAM files should not require/use mmap()
add the 'myisam_mmap_size' to the SHOW VARIABLES list
strmov() is not guaranteed to work correctly on overlapping
source and destination buffers. On some OSes it may work,
but Fedora 12 has a stpcpy() that's not working correctly
on overlapping buffers.
Fixed to use the overlap-safe version of strmov instead.
Re-vitalized the overlap-safe version of strmov.
As documented in the bug report, the double checked locking
pattern has inherent issues, and cannot guarantee correct
initialization.
This patch replaces the logic in init_available_charsets()
with the use of pthread_once(3). A wrapper function,
my_pthread_once(), is introduced and is used in lieu of direct
calls to init_available_charsets(). Related defines
MY_PTHREAD_ONCE_* are also introduced.
For the Windows platform, the implementation in lp:sysbench is
ported. For single-thread use, a simple define calls the
function and sets the pthread_once control variable.
Charset initialization is modified to use my_pthread_once().
include/my_no_pthread.h:
Dummy my_pthread_once() for single thread use.
include/my_pthread.h:
Declaration for new function my_pthread_once().
mysys/charset.c:
Logic in init_available_charsets() is simplified.
Using my_pthread_once() for all calls to this func.
mysys/my_winthread.c:
Windows implementation of my_pthread_once().
implement Davi's review suggestions (post-push fixes)
include/violite.h:
Use official abbreviation for milliseconds (ms)
sql/mysqld.cc:
Fix formatting
Add error handling for the case of CreateEvent error
vio/vio.c:
Use official abbreviation for milliseconds(ms)
Remove superfluous memset
Fix formatting
vio/viosocket.c:
Use official abbreviation for milliseconds (ms)
Use size_t datatype instead of int in pipe_complete_io
Bug#31621: Windows server hanging during shutdown using named pipes
and idle connection
Problem: when idle pipe connection is forcefully closed with KILL
statement or when the server goes down, thread that is closing connection
would hang infinitely in CloseHandle(). The reason for the hang is that
named pipe operations are performed synchronously. In this mode all IOs
on pipe are serialized, that is CloseHandle() will not abort ReadFile()
in another thread, but wait for ReadFile() to complete.
The fix implements asynchrnous mode for named pipes, where operation of file
are not synchronized. Read/Write operation would fire an async IO and wait for
either IO completion or timeout.
Note, that with this patch timeouts are properly handled for named pipes.
Post-review: Win32 timeout code has been fixed for named pipes and shared
memory. We do not store pointer to NET in vio structure, only the read and
write timeouts.
include/violite.h:
Add pipe_overlapped to Vio structure for async IO for named pipes.
sql-common/client.c:
Use asynchronous pipe IO.
sql/mysqld.cc:
Use asynchronous pipe IO.
vio/vio.c:
-Refactor timeouts for win32 protocols: shared memory and named pipes.
Store read/write timeout in VIO structure, instead of storing pointer
to NET. New function vio_win32_timeout called indirectly via
vio_timeout changes these values.
vio/vio_priv.h:
Remove vio_ignore_timeout.
Add vio_win32_timeout to be used for named pipes and shared memory.
vio/viosocket.c:
Use async IO for named pipes.
After issuing IO, wait for either IO completion, pipe_close_event
or timeout.
Refactor timeouts for named pipe and shared memory.
BUG#47073 - valgrind errs, corruption,failed repair of partition,
low myisam_sort_buffer_size
Fixed race conditions discovered with the provided test case and
stabilized test case.
include/myisam.h:
Serialize submission of messages from multi-threaded REPAIR.
mysql-test/r/myisam.result:
REPAIR output highly depend on threads activity. Disabled
result log to make test case deterministic.
mysql-test/t/myisam.test:
REPAIR output highly depend on threads activity. Disabled
result log to make test case deterministic.
storage/myisam/ha_myisam.cc:
Serialize submission of messages from multi-threaded REPAIR.
storage/myisam/mi_check.c:
Serialize submission of messages from multi-threaded REPAIR.
storage/myisam/sort.c:
Only master thread is allowed to detach write cache from
the share.
Backport from 6.0 to 5.1.
Only those sync points are included, which are used in debug_sync.test.
The Debug Sync Facility allows to place synchronization points
in the code:
open_tables(...)
DEBUG_SYNC(thd, "after_open_tables");
lock_tables(...)
When activated, a sync point can
- Send a signal and/or
- Wait for a signal
Nomenclature:
- signal: A value of a global variable that persists
until overwritten by a new signal. The global
variable can also be seen as a "signal post"
or "flag mast". Then the signal is what is
attached to the "signal post" or "flag mast".
- send a signal: Assign the value (the signal) to the global
variable ("set a flag") and broadcast a
global condition to wake those waiting for
a signal.
- wait for a signal: Loop over waiting for the global condition until
the global value matches the wait-for signal.
Please find more information in the top comment in debug_sync.cc
or in the worklog entry.
.bzrignore:
WL#4259 - Debug Sync Facility
Added the symbolic link libmysqld/debug_sync.cc.
CMakeLists.txt:
WL#4259 - Debug Sync Facility
Added definition for ENABLED_DEBUG_SYNC.
configure.in:
WL#4259 - Debug Sync Facility
Added definition for ENABLED_DEBUG_SYNC.
include/my_sys.h:
WL#4259 - Debug Sync Facility
Added definition for the DEBUG_SYNC_C macro.
libmysqld/CMakeLists.txt:
WL#4259 - Debug Sync Facility
Added sql/debug_sync.cc.
libmysqld/Makefile.am:
WL#4259 - Debug Sync Facility
Added sql/debug_sync.cc.
mysql-test/include/have_debug_sync.inc:
WL#4259 - Debug Sync Facility
New include file.
mysql-test/mysql-test-run.pl:
WL#4259 - Debug Sync Facility
Added option --debug_sync_timeout.
mysql-test/r/debug_sync.result:
WL#4259 - Debug Sync Facility
New test result.
mysql-test/r/have_debug_sync.require:
WL#4259 - Debug Sync Facility
New require file.
mysql-test/t/debug_sync.test:
WL#4259 - Debug Sync Facility
New test file.
mysys/my_static.c:
WL#4259 - Debug Sync Facility
Added definition for debug_sync_C_callback_ptr.
mysys/thr_lock.c:
WL#4259 - Debug Sync Facility
Added sync point "wait_for_lock".
sql/CMakeLists.txt:
WL#4259 - Debug Sync Facility
Added debug_sync.cc and debug_sync.h.
sql/Makefile.am:
WL#4259 - Debug Sync Facility
Added debug_sync.cc and debug_sync.h.
sql/debug_sync.cc:
WL#4259 - Debug Sync Facility
New source file.
sql/debug_sync.h:
WL#4259 - Debug Sync Facility
New header file.
sql/mysqld.cc:
WL#4259 - Debug Sync Facility
Added opt_debug_sync_timeout.
Added calls to debug_sync_init() and debug_sync_end().
Fixed a purecov comment (unrelated).
sql/set_var.cc:
WL#4259 - Debug Sync Facility
Added server variable "debug_sync".
sql/set_var.h:
WL#4259 - Debug Sync Facility
Added declaration for server variable "debug_sync".
sql/share/errmsg.txt:
WL#4259 - Debug Sync Facility
Added error messages ER_DEBUG_SYNC_TIMEOUT and ER_DEBUG_SYNC_HIT_LIMIT.
sql/sql_base.cc:
WL#4259 - Debug Sync Facility
Added sync points "after_flush_unlock" and "before_lock_tables_takes_lock".
sql/sql_class.cc:
WL#4259 - Debug Sync Facility
Added initialization for debug_sync_control to THD::THD.
Added calls to debug_sync_init_thread() and debug_sync_end_thread().
sql/sql_class.h:
WL#4259 - Debug Sync Facility
Added element debug_sync_control to THD.
storage/myisam/myisamchk.c:
Fixed a typo in an error message string (unrelated).
Restore a stub of the removed mysql_odbc_escape_string function
to fix a ABI breakage. The function was intended to be private
and used only by Connector/ODBC, but, unfortunately, it was exported
as part of the ABI. Nonetheless, only a stub is restored as the
original function is inherently broken and shouldn't be used.
This restoration only applies to MySQL 5.0. This will be addressed
differently in later versions -- reworked library versioning.
include/mysql.h:
Restore mysql_odbc_escape_string prototype.
include/mysql_h.ic:
Update ABI check.
libmysql/libmysql.c:
Restore a mysql_odbc_escape_string stub.
libmysql/libmysql.def:
Restore mysql_odbc_escape_string.
libmysqld/libmysqld.def:
Restore mysql_odbc_escape_string.
can crash under load
Backport from 5.1.
Does also include key cache fixes from:
Bug 44068 (RESTORE can disable the MyISAM Key Cache)
Bug 40944 (Backup: crash after myisampack)
include/keycache.h:
Bug#17332 - changing key_buffer_size on a running server
can crash under load
Added KEY_CACHE components in_resize and waiting_for_resize_cnt.
myisam/mi_preload.c:
Bug#17332 - changing key_buffer_size on a running server
can crash under load
Added code to allow LOAD INDEX to load indexes of different block size.
mysys/mf_keycache.c:
Bug#17332 - changing key_buffer_size on a running server
can crash under load
.
Changed resize_key_cache() to not disable the key cache
after the flush phase. Changed queue handling to use
standard functions. Wake all threads waiting on resize_queue.
We can now have read/write threads waiting there (see below).
.
Combined add_to_queue() and the wait loops that were always
following it to the new function wait_on_queue().
Combined release_queue() and the condition that was always
preceding it to the new function release_whole_queue().
.
Added code to flag and respect the exceptional situation
BLOCK_IN_EVICTION.
.
Rewrote the resize branch of find_key_block().
.
Added code to the eviction handling in find_key_block()
to catch more exceptional cases.
.
Changed key_cache_read(), key_cache_insert() and key_cache_write()
so that they lock keycache->cache_lock whenever the key cache is
initialized. Checking for a disabled cache and incrementing and
decrementing the "resize counter" is always done within the lock.
Locking and unlocking as well as counting the "resize counter" is
now done once outside the loop. All three functions can now handle
a NULL return from find_key_block. This happens in the flush phase
of a resize and demands direct file I/O. Care is taken for
secondary requests (PAGE_WAIT_TO_BE_READ) to wait in any case.
Moved block status changes behind the copying of buffer data.
key_cache_insert() does now read the block if the caller did
supply less data than a full cache block.
key_cache_write() does now take care of parallel running flushes
(BLOCK_FOR_UPDATE, BLOCK_IN_FLUSHWRITE).
.
Changed free_block() to un-initialize block variables in the
correct order and respect an exceptional BLOCK_IN_EVICTION state.
.
Changed flushing to take care for parallel running writes.
Changed flushing to avoid freeing blocks in eviction.
Changed flushing to consider that parallel writes can move blocks
from the file_blocks hash to the changed_blocks hash.
Changed flushing to take care for other parallel flushes.
Changed flushing to assure that it ends with everything flushed.
Optimized normal flush at end of statement (FLUSH_KEEP),
but let other flush types be stringent.
.
Added some comments and debugging statements.
mysys/my_static.c:
Bug#17332 - changing key_buffer_size on a running server
can crash under load
Removed an unused global variable.
sql/ha_myisam.cc:
Bug#17332 - changing key_buffer_size on a running server
can crash under load
Moved an automatic (stack) variable to the scope where it is used.
sql/sql_table.cc:
Bug#17332 - changing key_buffer_size on a running server
can crash under load
Changed TL_READ to TL_READ_NO_INSERT in mysql_preload_keys.
CREATE TABLE...LIKE...
The mysql server option 'sync_frm' is ignored when table is created with
syntax CREATE TABLE .. LIKE..
Fixed by adding the MY_SYNC flag and calling my_sync() from my_copy() when
the flag is set.
In mysql_create_table(), when the 'sync_frm' is set, MY_SYNC flag is passed
to my_copy().
Note: TestCase is not attached and can be tested manually using debugger.
client/Makefile.am:
BUG#46591 - .frm file isn't sync'd with sync_frm enabled for
CREATE TABLE...LIKE...
add my_sync to sources as it is used in my_copy() method
include/my_sys.h:
BUG#46591 - .frm file isn't sync'd with sync_frm enabled for
CREATE TABLE...LIKE...
MY_SYNC flag is added to call my_sync() method
mysys/my_copy.c:
BUG#46591 - .frm file isn't sync'd with sync_frm enabled for
CREATE TABLE...LIKE...
my_sync() is method is called when MY_SYNC is set in my_copy()
sql/sql_table.cc:
BUG#46591 - .frm file isn't sync'd with sync_frm enabled for
CREATE TABLE...LIKE...
Fixed mysql_create_like_table() to call my_sync() when opt_sync_frm variable
is set
with gcc 4.3.2
This patch fixes a number of GCC warnings about variables used
before initialized. A new macro UNINIT_VAR() is introduced for
use in the variable declaration, and LINT_INIT() usage will be
gradually deprecated. (A workaround is used for g++, pending a
patch for a g++ bug.)
GCC warnings for unused results (attribute warn_unused_result)
for a number of system calls (present at least in later
Ubuntus, where the usual void cast trick doesn't work) are
also fixed.
client/mysqlmanager-pwgen.c:
A fix for warn_unused_result, adding fallback to use of
srand()/rand() if /dev/random cannot be used. Also actually
adds calls to rand() in the second branch so that it actually
creates a random password.
- Define and pass compile time path variables as pre-processor definitions to
mimic the makefile build.
- Set new CMake version and policy requirements explicitly.
- Changed DATADIR to MYSQL_DATADIR to avoid conflicting definition in
Platform SDK header ObjIdl.h which also defines DATADIR.
not logged
Errors encountered during initialization of the SSL subsystem
are printed to stderr, rather than to the error log.
This patch adds a parameter to several SSL init functions to
report the error (if any) out to the caller. The function
init_ssl() in mysqld.cc is moved after the initialization of
the log subsystem, so that any error messages can be logged to
the error log. Printing of messages to stderr has been
retained to get diagnostic output in a client context.
include/violite.h:
Adding an enumeration for the various errors that can
occur during initialization of the SSL module.
sql/mysqld.cc:
Adding more logging of SSL init errors, and moving
init_ssl() till after initialization of logging
subsystem.
vio/viosslfactories.c:
Define error strings, provide an access method for these
strings, and maintain an error parameter in several funcs
to return the error (if any) to the caller.
it returns misleading 'table is full'
Innodb returns a misleading error message "table is full"
when the number of active concurrent transactions is greater
than 1024.
Fixed by adding errorcode "ER_TOO_MANY_CONCURRENT_TRXS" to the
error codes. Innodb should return HA_TOO_MANY_CONCURRENT_TRXS
to mysql which is then mapped to ER_TOO_MANY_CONCURRENT_TRXS
Note: testcase is not written as this was reproducible only by
changing innodb code.
extra/perror.c:
Add error number and message for HA_ERR_TOO_MANY_CONCURRENT_TRXS
include/my_base.h:
Add error number and message for HA_ERR_TOO_MANY_CONCURRENT_TRXS
sql/ha_innodb.cc:
Return HA_ERR_TOO_MANY_CONCURRENT_TRXS to mysql server
sql/handler.cc:
Add error number and message for HA_ERR_TOO_MANY_CONCURRENT_TRXS
sql/share/errmsg.txt:
Add error message for ER_TOO_MANY_CONCURRENT_TRXS
A REPLACE in the MERGE engine is actually a REPLACE
into one (FIRST or LAST) of the underlying MyISAM
tables. So in effect the server works on the meta
data of the MERGE table, while the real insert happens
in the MyISAM table.
The MERGE table has no index, while MyISAM has a
unique index. When a REPLACE into a MERGE table (
and the REPLACE conflicts with a duplicate in a
child table) is done, we try to access the duplicate
key information for the MERGE table. This information
actually does not exist, hence this results in a crash.
The problem can be resolved by modifying the MERGE
engine to provide us the duplicate key information
directly, instead of just returning the MyISAM index
number as the error key. Then the SQL layer (or "the
server") does not try to access the key_info of the
MERGE table, which does not exist.
The current patch modifies the MERGE engine to provide
the position for a record where a unique key violation
occurs.
include/myisammrg.h:
Bug#45800 crash when replacing into a merge table and there is a duplicate
Add a member to the st_mymerge_info structure that will
store the duplicate key offset in the MERGE table. This
offset will be the sum of the record offset of the MyISAM
table within the MERGE table and the offset of the record
within the MyISAM table.
mysql-test/r/merge.result:
Bug#45800 crash when replacing into a merge table and there is a duplicate
Result file for the test case.
mysql-test/t/merge.test:
Bug#45800 crash when replacing into a merge table and there is a duplicate
Added test case for both REPLACE and INSERT...ON DUPLICATE UPDATE.
storage/myisammrg/ha_myisammrg.cc:
Bug#45800 crash when replacing into a merge table and there is a duplicate
The info method now will process the HA_STATUS_ERRKEY flag
and will return the index and the offset of the duplicate
key.
storage/myisammrg/ha_myisammrg.h:
Bug#45800 crash when replacing into a merge table and there is a duplicate
Set the HA_DUPLICATE_POS flag to indicate that the duplicate
key information is now available in the MERGE storage engine.
storage/myisammrg/myrg_info.c:
Bug#45800 crash when replacing into a merge table and there is a duplicate
We modify the myrg_status function to return the position of the
duplicate key. The duplicate key position in the MERGE table will
be the MyISAM file_offset and the offset within the MyISAM table
of the start position of the records.
