Protection added to reopen_file() and new_file_impl().
Without this we could get an assert in fn_format() as name == 0,
because the file was closed and name reset, atthe same time
new_file_impl() was called.
This has no functional changes, but it helps avoid merge problems from 10.0
to 10.1. In 10.0, code that checks for parallel replication uses
opt_slave_parallel_threads > 0, but this check needs to be
mi->using_parallel() in 10.1. By using the same check in 10.0 (with
unchanged semantics), merge problems to 10.1 are avoided.
The issue was that when running with valgrind the wait for master_pos_Wait()
was not long enough.
This patch also fixes two other failures that could affect rpl_mdev6020:
- check_if_conflicting_replication_locks() didn't properly check domains
- 'did_mark_start_commit' was after signals to other threads was sent which could
get the variable read too early.
This occurs when replication stops with an error, domain-based parallel
replication is used, and the GTID position contains more than one domain.
Furthermore, it relates to the case where the SQL thread is restarted
without first stopping the IO thread.
In this case, the file/offset relay-log position does not correctly
represent the slave's multi-dimensional position, because other domains may
be far ahead of, or behind, the domain with the failing event. So the code
reverts the relay log position back to the start of a relay log file that is
known to be before all active domains.
There was a bug that when the SQL thread was restarted, the
rli->relay_log_state was incorrectly initialised from @@gtid_slave_pos. This
position will likely be too far ahead, due to reverting the relay log
position. Thus, if the replication fails again after the SQL thread restart,
the rli->restart_gtid_pos might be updated incorrectly. This in turn would
cause a second SQL thread restart to replicate from the wrong position, if
the IO thread was still left running.
The fix is to initialise rli->relay_log_state from @@gtid_slave_pos only
when we actually purge and re-fetch relay logs from the master, not at every
SQL thread start.
A related problem is the use of sql_slave_skip_counter to resolve
replication failures in this kind of scenario. Since the slave position is
multi-dimensional, sql_slave_skip_counter can not work properly - it is
indeterminate exactly which event is to be skipped, and is unlikely to work
as expected for the user. So make this an error in the case where
domain-based parallel replication is used with multiple domains, suggesting
instead the user to set @@gtid_slave_pos to reliably skip the desired event.
- Added testing if connection is killed to shortcut reading of connection data
This will allow us later in 10.2 to do a cleaner shutdown of slaves (less errors in the log)
- Add new status variables: Slaves_connected, Slaves_running and Slave_connections.
- Use MYSQL_SLAVE_NOT_RUN instead of 0 with slave_running.
- Don't print obvious extra warnings to the error log when slave is shut down normally.
This includes fixing all utilities to not have any memory leaks,
as safemalloc warnings stopped tests from passing on MacOSX.
- Ensure that all clients takes character-set-dir, as the
libmysqlclient library will use it.
- mysql-test-run now passes character-set-dir to all external clients.
- Changed dynstr_free() so that it can be called twice (made freeing code easier)
- Changed rpl_global_gtid_slave_state to be allocated dynamicly as it
includes a mutex that needs to be initizlied/destroyed before my_end() is called.
- Removed rpl_slave_state::init() and rpl_slave_stage::deinit() as
their job are better handling by constructor and delete.
- Print alias instead of table_name in check_duplicate_key as
table_name may have been converted to lower case.
Other things:
- Fixed a case in time_to_datetime_with_warn() where we where
using && instead of & in tests
Before, the Seconds_behind_master was updated already when an event
was queued for a worker thread to execute later. This might lead users
to interpret a low value as the slave being almost up to date with the
master, while in reality there might still be lots and lots of events
still queued up waiting to be applied by the slave.
See https://lists.launchpad.net/maria-developers/msg08958.html for
more detailed discussions.
The code was using the wrong variable when comparing the binlog name
for the UNTIL position. This could cause the comparison to fail after
binlog rotation, in turn causing the UNTIL clause to not trigger slave
stop.
The --gtid-ignore-duplicates option was not working correctly with row-based
replication. When a row event was completed, but before committing, there
was a small window where another multi-source SQL thread could wrongly try
to re-execute the same transaction, without properly ignoring the duplicate
GTID. This would lead to duplicate key error or out-of-order GTID error or
similar.
Thanks to Matt Neth for reporting this and giving an easy way to reproduce
the issue.
1. After a period of wait (where last_master_timestamp=0)
do NOT restore the last_master_timestamp to the timestamp
of the last executed event (which would mean we've just
executed it, and we're that much behind the master).
2. Update last_master_timestamp before executing the event,
not after.
Take the approach from the this commit (but with a different test
case that actually makes sense):
commit 0c75ab453fb8c5439576af8fe5add7a1b89f1569
Author: Luis Soares <luis.soares@sun.com>
Date: Thu Apr 15 17:39:31 2010 +0100
BUG#52166: Seconds_Behind_Master spikes after long idle period
The problem occurs in parallel replication in GTID mode, when we are using
multiple replication domains. In this case, if the SQL thread stops, the
slave GTID position may refer to a different point in the relay log for each
domain.
The bug was that when the SQL thread was stopped and restarted (but the IO
thread was kept running), the SQL thread would resume applying the relay log
from the point of the most advanced replication domain, silently skipping all
earlier events within other domains. This caused replication corruption.
This patch solves the problem by storing, when the SQL thread stops with
multiple parallel replication domains active, the current GTID
position. Additionally, the current position in the relay logs is moved back
to a point known to be earlier than the current position of any replication
domain. Then when the SQL thread restarts from the earlier position, GTIDs
encountered are compared against the stored GTID position. Any GTID that was
already applied before the stop is skipped to avoid duplicate apply.
This patch should have no effect if multi-domain GTID parallel replication is
not used. Similarly, if both SQL and IO thread are stopped and restarted, the
patch has no effect, as in this case the existing relay logs are removed and
re-fetched from the master at the current global @@gtid_slave_pos.
The bug occurs when a transaction does a retry after all transactions have
done mark_start_commit() in a batch of group commit from the master. In this
case, the retrying transaction can unmark_start_commit() after the following
batch has already started running and de-allocated the GCO. Then after retry,
the transaction will re-do mark_start_commit() on a de-allocated GCO, and also
wakeup of later GCOs can be lost.
This was seen "in the wild" by a user, even though it is not known exactly
what circumstances can lead to retry of one transaction after all transactions
in a group have reached the commit phase.
The lifetime around GCO was somewhat clunky anyway. With this patch, a GCO
lives until rpl_parallel_entry::last_committed_sub_id has reached the last
transaction in the GCO. This guarantees that the GCO will still be alive when
a transaction does mark_start_commit(). Also, we now loop over the list of
active GCOs for wakeup, to ensure we do not lose a wakeup even in the
problematic case.
The replication relay log position was sometimes updated incorrectly at the
end of a transaction in parallel replication. This happened because the relay
log file name was taken from the current Relay_log_info (SQL driver thread),
not the correct value for the transaction in question.
The result was that if a transaction was applied while the SQL driver thread
was at least one relay log file ahead, _and_ the SQL thread was subsequently
stopped before applying any events from the most recent relay log file, then
the relay log position would be incorrect - wrong relay log file name. Thus,
when the slave was started again, usually a relay log read error would result,
or in rare cases, if the position happened to be readable, the slave might
even skip arbitrary amounts of events.
In GTID mode, the relay log position is reset when both slave threads are
restarted, so this bug would only be seen in non-GTID mode, or in GTID mode
when only the SQL thread, not the IO thread, was stopped.
When a master slave restarts, it logs a special restart format description
event in its binlog. When the slave sees this event, it knows it needs to roll
back any active partial transaction, in case the master crashed previously in
the middle of writing such transaction to its binlog.
However, there was a bug where this rollback did not reset rgi->pending_gtid.
This caused the @@gtid_slave_pos to be updated incorrectly with the GTID of
the partial transaction that was rolled back.
Fix this by always clearing rgi->pending_gtid in cleanup_context(), hopefully
preventing similar bugs from turning up in other special cases where a
transaction is rolled back during replication.
Thanks to Pavel Ivanov for tracking down the issue and providing a test case.
The code that handles free lists of various objects passed to worker threads
in parallel replication handles freeing in batches, to avoid taking and
releasing LOCK_rpl_thread too often. However, it was possible for freeing to
be delayed to the point where one thread could stall the SQL driver thread due
to full queue, while other worker threads might be idle. This could
significantly degrade possible parallelism and thus performance.
Clean up the batch freeing code so that it is more robust and now able to
regularly free batches of object, so that normally the queue will not run full
unless the SQL driver thread is really far ahead of the worker threads.
The bug occured in parallel replication when re-trying transactions that
failed due to deadlock. In this case, the relay log file is re-opened and the
events are read out again. This reading requires a format description event of
the appropriate version. But the code was using a description event stored in
rli, which is not thread-safe. This could lead to various rare races if the
format description event was replaced by the SQL driver thread at the exact
moment where a worker thread was trying to use it.
The fix is to instead make the retry code create and maintain its own format
description event. When the relay log file is opened, we first read the format
description event from the start of the file, before seeking to the current
position. This now uses the same code as when the SQL driver threads starts
from a given relay log position. This also makes sure that the correct format
description event version will be used in cases where the version of the
binlog could change during replication.
The reason for the failure was a bug in an include file on debian that causes 'struct stat'
to have different sized depending on the environment.
This patch fixes so that we always include my_global.h or my_config.h before we include any other files.
Other things:
- Removed #include <my_global.h> in some include files; Better to always do this at the top level to have as few
"always-include-this-file-first' files as possible.
- Removed usage of some include files that where already included by my_global.h or by other files.
client/mysql_plugin.c:
Use my_global.h first
client/mysqlslap.c:
Remove duplicated include files
extra/comp_err.c:
Remove duplicated include files
include/m_string.h:
Remove duplicated include files
include/maria.h:
Remove duplicated include files
libmysqld/emb_qcache.cc:
Use my_global.h first
plugin/semisync/semisync.h:
Use my_pthread.h first
sql/datadict.cc:
Use my_global.h first
sql/debug_sync.cc:
Use my_global.h first
sql/derror.cc:
Use my_global.h first
sql/des_key_file.cc:
Use my_global.h first
sql/discover.cc:
Use my_global.h first
sql/event_data_objects.cc:
Use my_global.h first
sql/event_db_repository.cc:
Use my_global.h first
sql/event_parse_data.cc:
Use my_global.h first
sql/event_queue.cc:
Use my_global.h first
sql/event_scheduler.cc:
Use my_global.h first
sql/events.cc:
Use my_global.h first
sql/field.cc:
Use my_global.h first
Remove duplicated include files
sql/field_conv.cc:
Use my_global.h first
sql/filesort.cc:
Use my_global.h first
Remove duplicated include files
sql/gstream.cc:
Use my_global.h first
sql/ha_ndbcluster.cc:
Use my_global.h first
sql/ha_ndbcluster_binlog.cc:
Use my_global.h first
sql/ha_ndbcluster_cond.cc:
Use my_global.h first
sql/ha_partition.cc:
Use my_global.h first
sql/handler.cc:
Use my_global.h first
sql/hash_filo.cc:
Use my_global.h first
sql/hostname.cc:
Use my_global.h first
sql/init.cc:
Use my_global.h first
sql/item.cc:
Use my_global.h first
sql/item_buff.cc:
Use my_global.h first
sql/item_cmpfunc.cc:
Use my_global.h first
sql/item_create.cc:
Use my_global.h first
sql/item_geofunc.cc:
Use my_global.h first
sql/item_inetfunc.cc:
Use my_global.h first
sql/item_row.cc:
Use my_global.h first
sql/item_strfunc.cc:
Use my_global.h first
sql/item_subselect.cc:
Use my_global.h first
sql/item_sum.cc:
Use my_global.h first
sql/item_timefunc.cc:
Use my_global.h first
sql/item_xmlfunc.cc:
Use my_global.h first
sql/key.cc:
Use my_global.h first
sql/lock.cc:
Use my_global.h first
sql/log.cc:
Use my_global.h first
sql/log_event.cc:
Use my_global.h first
sql/log_event_old.cc:
Use my_global.h first
sql/mf_iocache.cc:
Use my_global.h first
sql/mysql_install_db.cc:
Remove duplicated include files
sql/mysqld.cc:
Remove duplicated include files
sql/net_serv.cc:
Remove duplicated include files
sql/opt_range.cc:
Use my_global.h first
sql/opt_subselect.cc:
Use my_global.h first
sql/opt_sum.cc:
Use my_global.h first
sql/parse_file.cc:
Use my_global.h first
sql/partition_info.cc:
Use my_global.h first
sql/procedure.cc:
Use my_global.h first
sql/protocol.cc:
Use my_global.h first
sql/records.cc:
Use my_global.h first
sql/records.h:
Don't include my_global.h
Better to do this at the upper level
sql/repl_failsafe.cc:
Use my_global.h first
sql/rpl_filter.cc:
Use my_global.h first
sql/rpl_gtid.cc:
Use my_global.h first
sql/rpl_handler.cc:
Use my_global.h first
sql/rpl_injector.cc:
Use my_global.h first
sql/rpl_record.cc:
Use my_global.h first
sql/rpl_record_old.cc:
Use my_global.h first
sql/rpl_reporting.cc:
Use my_global.h first
sql/rpl_rli.cc:
Use my_global.h first
sql/rpl_tblmap.cc:
Use my_global.h first
sql/rpl_utility.cc:
Use my_global.h first
sql/set_var.cc:
Added comment
sql/slave.cc:
Use my_global.h first
sql/sp.cc:
Use my_global.h first
sql/sp_cache.cc:
Use my_global.h first
sql/sp_head.cc:
Use my_global.h first
sql/sp_pcontext.cc:
Use my_global.h first
sql/sp_rcontext.cc:
Use my_global.h first
sql/spatial.cc:
Use my_global.h first
sql/sql_acl.cc:
Use my_global.h first
sql/sql_admin.cc:
Use my_global.h first
sql/sql_analyse.cc:
Use my_global.h first
sql/sql_audit.cc:
Use my_global.h first
sql/sql_base.cc:
Use my_global.h first
sql/sql_binlog.cc:
Use my_global.h first
sql/sql_bootstrap.cc:
Use my_global.h first
Use my_global.h first
sql/sql_cache.cc:
Use my_global.h first
sql/sql_class.cc:
Use my_global.h first
sql/sql_client.cc:
Use my_global.h first
sql/sql_connect.cc:
Use my_global.h first
sql/sql_crypt.cc:
Use my_global.h first
sql/sql_cursor.cc:
Use my_global.h first
sql/sql_db.cc:
Use my_global.h first
sql/sql_delete.cc:
Use my_global.h first
sql/sql_derived.cc:
Use my_global.h first
sql/sql_do.cc:
Use my_global.h first
sql/sql_error.cc:
Use my_global.h first
sql/sql_explain.cc:
Use my_global.h first
sql/sql_expression_cache.cc:
Use my_global.h first
sql/sql_handler.cc:
Use my_global.h first
sql/sql_help.cc:
Use my_global.h first
sql/sql_insert.cc:
Use my_global.h first
sql/sql_lex.cc:
Use my_global.h first
sql/sql_load.cc:
Use my_global.h first
sql/sql_locale.cc:
Use my_global.h first
sql/sql_manager.cc:
Use my_global.h first
sql/sql_parse.cc:
Use my_global.h first
sql/sql_partition.cc:
Use my_global.h first
sql/sql_plugin.cc:
Added comment
sql/sql_prepare.cc:
Use my_global.h first
sql/sql_priv.h:
Added error if we use this before including my_global.h
This check is here becasue so many files includes sql_priv.h first.
sql/sql_profile.cc:
Use my_global.h first
sql/sql_reload.cc:
Use my_global.h first
sql/sql_rename.cc:
Use my_global.h first
sql/sql_repl.cc:
Use my_global.h first
sql/sql_select.cc:
Use my_global.h first
sql/sql_servers.cc:
Use my_global.h first
sql/sql_show.cc:
Added comment
sql/sql_signal.cc:
Use my_global.h first
sql/sql_statistics.cc:
Use my_global.h first
sql/sql_table.cc:
Use my_global.h first
sql/sql_tablespace.cc:
Use my_global.h first
sql/sql_test.cc:
Use my_global.h first
sql/sql_time.cc:
Use my_global.h first
sql/sql_trigger.cc:
Use my_global.h first
sql/sql_udf.cc:
Use my_global.h first
sql/sql_union.cc:
Use my_global.h first
sql/sql_update.cc:
Use my_global.h first
sql/sql_view.cc:
Use my_global.h first
sql/sys_vars.cc:
Added comment
sql/table.cc:
Use my_global.h first
sql/thr_malloc.cc:
Use my_global.h first
sql/transaction.cc:
Use my_global.h first
sql/uniques.cc:
Use my_global.h first
sql/unireg.cc:
Use my_global.h first
sql/unireg.h:
Removed inclusion of my_global.h
storage/archive/ha_archive.cc:
Added comment
storage/blackhole/ha_blackhole.cc:
Use my_global.h first
storage/csv/ha_tina.cc:
Use my_global.h first
storage/csv/transparent_file.cc:
Use my_global.h first
storage/federated/ha_federated.cc:
Use my_global.h first
storage/federatedx/federatedx_io.cc:
Use my_global.h first
storage/federatedx/federatedx_io_mysql.cc:
Use my_global.h first
storage/federatedx/federatedx_io_null.cc:
Use my_global.h first
storage/federatedx/federatedx_txn.cc:
Use my_global.h first
storage/heap/ha_heap.cc:
Use my_global.h first
storage/innobase/handler/handler0alter.cc:
Use my_global.h first
storage/maria/ha_maria.cc:
Use my_global.h first
storage/maria/unittest/ma_maria_log_cleanup.c:
Remove duplicated include files
storage/maria/unittest/test_file.c:
Added comment
storage/myisam/ha_myisam.cc:
Move sql_plugin.h first as this includes my_global.h
storage/myisammrg/ha_myisammrg.cc:
Use my_global.h first
storage/oqgraph/oqgraph_thunk.cc:
Use my_config.h and my_global.h first
One could not include my_global.h before oqgraph_thunk.h (don't know why)
storage/spider/ha_spider.cc:
Use my_global.h first
storage/spider/hs_client/config.cpp:
Use my_global.h first
storage/spider/hs_client/escape.cpp:
Use my_global.h first
storage/spider/hs_client/fatal.cpp:
Use my_global.h first
storage/spider/hs_client/hstcpcli.cpp:
Use my_global.h first
storage/spider/hs_client/socket.cpp:
Use my_global.h first
storage/spider/hs_client/string_util.cpp:
Use my_global.h first
storage/spider/spd_conn.cc:
Use my_global.h first
storage/spider/spd_copy_tables.cc:
Use my_global.h first
storage/spider/spd_db_conn.cc:
Use my_global.h first
storage/spider/spd_db_handlersocket.cc:
Use my_global.h first
storage/spider/spd_db_mysql.cc:
Use my_global.h first
storage/spider/spd_db_oracle.cc:
Use my_global.h first
storage/spider/spd_direct_sql.cc:
Use my_global.h first
storage/spider/spd_i_s.cc:
Use my_global.h first
storage/spider/spd_malloc.cc:
Use my_global.h first
storage/spider/spd_param.cc:
Use my_global.h first
storage/spider/spd_ping_table.cc:
Use my_global.h first
storage/spider/spd_sys_table.cc:
Use my_global.h first
storage/spider/spd_table.cc:
Use my_global.h first
storage/spider/spd_trx.cc:
Use my_global.h first
storage/xtradb/handler/handler0alter.cc:
Use my_global.h first
storage/xtradb/handler/i_s.cc:
Use my_global.h first
Merge the patches into MariaDB 10.0 main.
With this patch, parallel replication will now automatically retry a
transaction that fails due to deadlock or other temporary error, same as
single-threaded replication.
We catch deadlocks with InnoDB transactions due to enforced commit order. If
T1 must commit before T2 in parallel replication and T1 ends up waiting for T2
inside InnoDB, we kill T2 and retry it later to resolve the deadlock
automatically.
After-review changes.
For this patch in 10.0, we do not introduce a new public storage engine API,
we just fix the InnoDB/XtraDB issues. In 10.1, we will make a better public
API that can be used for all storage engines (MDEV-6429).
Eliminate the background thread that did deadlock kills asynchroneously.
Instead, we ensure that the InnoDB/XtraDB code can handle doing the kill from
inside the deadlock detection code (when thd_report_wait_for() needs to kill a
later thread to resolve a deadlock).
(We preserve the part of the original patch that introduces dedicated mutex
and condition for the slave init thread, to remove the abuse of
LOCK_thread_count for start/stop synchronisation of the slave init thread).
The sql_slave_skip_counter is important to be able to recover replication from
certain errors. Often, an appropriate solution is to set
sql_slave_skip_counter to skip over a problem event. But setting
sql_slave_skip_counter produced an error in GTID mode, with a suggestion to
instead set @@gtid_slave_pos to point past the problem event. This however is
not always possible; for example, in case of an INCIDENT event, that event
does not have any GTID to assign to @@gtid_slave_pos.
With this patch, sql_slave_skip_counter now works in GTID mode the same was as
in non-GTID mode. When set, that many initial events are skipped when the SQL
thread starts, plus as many extra events are needed to completely skip any
partially skipped event group. The GTID position is updated to point past the
skipped event(s).
If replication breaks in GTID mode, it is not trivial to determine the GTID of
the failing event group. This is a problem, as such GTID is needed eg. to
explicitly set @@gtid_slave_pos to skip to after that event group, or to
compare errors on different servers, etc.
Fix by ensuring that relevant slave errors logged to the error log include the
GTID of the event group containing the problem event.
MySQL 5.6 implemented WL#344, which is about a MASTER_DELAY option to CHANGE
MASTER. But as part of this worklog, the format of the realy-log.info file was
changed. The new format is not understood by earlier versions, and nor by
MariaDB 10.0, so changing server to those versions would cause the slave to
abort with an error due to reading incorrect data out of relay-log.info.
Fix this by backporting from the WL#344 patch just the code that understands
the new relay-log.info format. We still write out the old format, and none of
the MASTER_DELAY feature is backported with this commit.
replication causing replication to fail.
Remove the temporary fix for MDEV-5914, which used READ COMMITTED for parallel
replication worker threads. Replace it with a better, more selective solution.
The issue is with certain edge cases of InnoDB gap locks, for example between
INSERT and ranged DELETE. It is possible for the gap lock set by the DELETE to
block the INSERT, if the DELETE runs first, while the record lock set by
INSERT does not block the DELETE, if the INSERT runs first. This can cause a
conflict between the two in parallel replication on the slave even though they
ran without conflicts on the master.
With this patch, InnoDB will ask the server layer about the two involved
transactions before blocking on a gap lock. If the server layer tells InnoDB
that the transactions are already fixed wrt. commit order, as they are in
parallel replication, InnoDB will ignore the gap lock and allow the two
transactions to proceed in parallel, avoiding the conflict.
Improve the fix for MDEV-6020. When InnoDB itself detects a deadlock, it now
asks the server layer for any preferences about which transaction to roll
back. In case of parallel replication with two transactions T1 and T2 fixed to
commit T1 before T2, the server layer will ask InnoDB to roll back T2 as the
deadlock victim, not T1. This helps in some cases to avoid excessive deadlock
rollback, as T2 will in any case need to wait for T1 to complete before it can
itself commit.
Also some misc. fixes found during development and testing:
- Remove thd_rpl_is_parallel(), it is not used or needed.
- Use KILL_CONNECTION instead of KILL_QUERY when a parallel replication
worker thread is killed to resolve a deadlock with fixed commit
ordering. There are some cases, eg. in sql/sql_parse.cc, where a KILL_QUERY
can be ignored if the query otherwise completed successfully, and this
could cause the deadlock kill to be lost, so that the deadlock was not
correctly resolved.
- Fix random test failure due to missing wait_for_binlog_checkpoint.inc.
- Make sure that deadlock or other temporary errors during parallel
replication are not printed to the the error log; there were some places
around the replication code with extra error logging. These conditions can
occur occasionally and are handled automatically without breaking
replication, so they should not pollute the error log.
- Fix handling of rgi->gtid_sub_id. We need to be able to access this also at
the end of a transaction, to be able to detect and resolve deadlocks due to
commit ordering. But this value was also used as a flag to mark whether
record_gtid() had been called, by being set to zero, losing the value. Now,
introduce a separate flag rgi->gtid_pending, so rgi->gtid_sub_id remains
valid for the entire duration of the transaction.
- Fix one place where the code to handle ignored errors called reset_killed()
unconditionally, even if no error was caught that should be ignored. This
could cause loss of a deadlock kill signal, breaking deadlock detection and
resolution.
- Fix a couple of missing mysql_reset_thd_for_next_command(). This could
cause a prior error condition to remain for the next event executed,
causing assertions about errors already being set and possibly giving
incorrect error handling for following event executions.
- Fix code that cleared thd->rgi_slave in the parallel replication worker
threads after each event execution; this caused the deadlock detection and
handling code to not be able to correctly process the associated
transactions as belonging to replication worker threads.
- Remove useless error code in slave_background_kill_request().
- Fix bug where wfc->wakeup_error was not cleared at
wait_for_commit::unregister_wait_for_prior_commit(). This could cause the
error condition to wrongly propagate to a later wait_for_prior_commit(),
causing spurious ER_PRIOR_COMMIT_FAILED errors.
- Do not put the binlog background thread into the processlist. It causes
too many result differences in mtr, but also it probably is not useful
for users to pollute the process list with a system thread that does not
really perform any user-visible tasks...
replication causing replication to fail.
In parallel replication, we run transactions from the master in parallel, but
force them to commit in the same order they did on the master. If we force T1
to commit before T2, but T2 holds eg. a row lock that is needed by T1, we get
a deadlock when T2 waits until T1 has committed.
Usually, we do not run T1 and T2 in parallel if there is a chance that they
can have conflicting locks like this, but there are certain edge cases where
it can occasionally happen (eg. MDEV-5914, MDEV-5941, MDEV-6020). The bug was
that this would cause replication to hang, eventually getting a lock timeout
and causing the slave to stop with error.
With this patch, InnoDB will report back to the upper layer whenever a
transactions T1 is about to do a lock wait on T2. If T1 and T2 are parallel
replication transactions, and T2 needs to commit later than T1, we can thus
detect the deadlock; we then kill T2, setting a flag that causes it to catch
the kill and convert it to a deadlock error; this error will then cause T2 to
roll back and release its locks (so that T1 can commit), and later T2 will be
re-tried and eventually also committed.
The kill happens asynchroneously in a slave background thread; this is
necessary, as the reporting from InnoDB about lock waits happen deep inside
the locking code, at a point where it is not possible to directly call
THD::awake() due to mutexes held.
Deadlock is assumed to be (very) rarely occuring, so this patch tries to
minimise the performance impact on the normal case where no deadlocks occur,
rather than optimise the handling of the occasional deadlock.
Also fix transaction retry due to deadlock when it happens after a transaction
already signalled to later transactions that it started to commit. In this
case we need to undo this signalling (and later redo it when we commit again
during retry), so following transactions will not start too early.
Also add a missing thd->send_kill_message() that got triggered during testing
(this corrects an incorrect fix for MySQL Bug#58933).
Handle retry of event groups that span multiple relay log files.
- If retry reaches the end of one relay log file, move on to the next.
- Handle refcounting of relay log files, and avoid purging relay log
files until all event groups have completed that might have needed
them for transaction retry.
Start implementing that an event group can be re-tried in parallel replication
if it fails with a temporary error (like deadlock).
Patch is very incomplete, just some very basic retry works.
Stuff still missing (not complete list):
- Handle moving to the next relay log file, if event group to be retried
spans multiple relay log files.
- Handle refcounting of relay log files, to ensure that we do not purge a
relay log file and then later attempt to re-execute events out of it.
- Handle description_event_for_exec - we need to save this somehow for the
possible retry - and use the correct one in case it differs between relay
logs.
- Do another retry attempt in case the first retry also fails.
- Limit the max number of retries.
- Lots of testing will be needed for the various edge cases.
The previous patch for this bug was unfortunately completely wrong.
The purpose of cached_charset is to remember which character set we
have installed currently in the THD, so that in the common case where
charset does not change between queries, we do not need to update it
in the THD. Thus, it is important that the cached_charset field is
tightly coupled to the THD for which it handles caching.
Thus the right place to put cached_charset seems to be in the THD.
This patch introduces a field THD:system_thread_info where such info
in general can be placed without further inflating the THD with unused
data for other threads (THD is already far too big as it is). It then
moves the cached_charset into this slot for the SQL driver thread and
for the parallel replication worker threads.
The THD::rpl_filter field is also moved inside system_thread_info, to
keep the size of THD unchanged. Moving further fields in to reduce the
size of THD is a separate task, filed as MDEV-6164.
Replication caches the character sets used in a query, to be able to quickly
reuse them for the next query in the common case of them not having changed.
In parallel replication, this caching needs to be per-worker-thread. The
code was not modified to handle this correctly, so the caching in one worker
could cause another worker to run a query using the wrong character set,
causing replication corruption.
When a transaction fails in parallel replication, it should signal the error
to any following transactions doing wait_for_prior_commit() on it. But the
code for this was incorrect, and would not correctly remember a prior error
when sending the signal. This caused corruption when slave stopped due to an
error.
Fix by remembering the error code when we first get an error, and passing the
saved error code to wakeup_subsequent_commits().
Thanks to nanyi607rao who reported this bug on
maria-developers@lists.launchpad.net and analysed the root cause.
Before, the arrival of same GTID twice in multi-source replication
would cause double-apply or in gtid strict mode an error.
Keep the behaviour, but add an option --gtid-ignore-duplicates which
allows to correctly handle duplicates, ignoring all but the first.
This relies on the user ensuring correct configuration so that
sequence numbers are strictly increasing within each replication
domain; then duplicates can be detected simply by comparing the
sequence numbers against what is already applied.
Only one master connection (but possibly multiple parallel worker
threads within that connection) is allowed to apply events within
one replication domain at a time; any other connection that
receives a GTID in the same domain either discards it (if it is
already applied) or waits for the other connection to not have
any events to apply.
Intermediate patch, as proof-of-concept for testing. The main limitation
is that currently it is only implemented for parallel replication,
@@slave_parallel_threads > 0.
With parallel replication, there can be any number of events queued on
in-memory lists in the worker threads.
For normal STOP SLAVE, we want to skip executing any remaining events on those
lists and stop as quickly as possible.
However, for START SLAVE UNTIL, when the UNTIL position is reached in the SQL
driver thread, we must _not_ stop until all already queued events for the
workers have been executed - otherwise we would stop too early, before the
actual UNTIL position had been completely reached.
The code did not handle UNTIL correctly, stopping too early due to not
executing the queued events to completion. Fix this, and also implement that
an explicit STOP SLAVE in the middle (when the SQL driver thread has reached
the UNTIL position but the workers have not) _will_ cause an immediate stop.
Clean up and improve the parallel implementation code, mainly related to
scheduling of work to threads and handling of stop and errors.
Fix a lot of bugs in various corner cases that could lead to crashes or
corruption.
Fix that a single replication domain could easily grab all worker threads and
stall all other domains; now a configuration variable
--slave-domain-parallel-threads allows to limit the number of
workers.
Allow next event group to start as soon as previous group begins the commit
phase (as opposed to when it ends it); this allows multiple event groups on
the slave to participate in group commit, even when no other opportunities for
parallelism are available.
Various fixes:
- Fix some races in the rpl.rpl_parallel test case.
- Fix an old incorrect assertion in Log_event iocache read.
- Fix repeated malloc/free of wait_for_commit and rpl_group_info objects.
- Simplify wait_for_commit wakeup logic.
- Fix one case in queue_for_group_commit() where killing one thread would
fail to correctly signal the error to the next, causing loss of the
transaction after slave restart.
- Fix leaking of pthreads (and their allocated stack) due to missing
PTHREAD_CREATE_DETACHED attribute.
- Fix how one batch of group-committed transactions wait for the previous
batch before starting to execute themselves. The old code had a very
complex scheduling where the first transaction was handled differently,
with subtle bugs in corner cases. Now each event group is always scheduled
for a new worker (in a round-robin fashion amongst available workers).
Keep a count of how many transactions have started to commit, and wait for
that counter to reach the appropriate value.
- Fix slave stop to wait for all workers to actually complete processing;
before, the wait was for update of last_committed_sub_id, which happens a
bit earlier, and could leave worker threads potentially accessing bits of
the replication state that is no longer valid after slave stop.
- Fix a couple of places where the test suite would kill a thread waiting
inside enter_cond() in connection with debug_sync; debug_sync + kill can
crash in rare cases due to a race with mysys_var_current_mutex in this
case.
- Fix some corner cases where we had enter_cond() but no exit_cond().
- Fix that we could get failure in wait_for_prior_commit() but forget to flag
the error with my_error().
- Fix slave stop (both for normal stop and stop due to error). Now, at stop
we pick a specific safe point (in terms of event groups executed) and make
sure that all event groups before that point are executed to completion,
and that no event group after start executing; this ensures a safe place to
restart replication, even for non-transactional stuff/DDL. In error stop,
make sure that all prior event groups are allowed to execute to completion,
and that any later event groups that have started are rolled back, if
possible. The old code could leave eg. T1 and T3 committed but T2 not, or
it could even leave half a transaction not rolled back in some random
worker, which would cause big problems when that worker was later reused
after slave restart.
- Fix the accounting of amount of events queued for one worker. Before, the
amount was reduced immediately as soon as the events were dequeued (which
happens all at once); this allowed twice the amount of events to be queued
in memory for each single worker, which is not what users would expect.
- Fix that an error set during execution of one event was sometimes not
cleared before executing the next, causing problems with the error
reporting.
- Fix incorrect handling of thd->killed in worker threads.
MDEV-4984: Implement MASTER_GTID_WAIT() and @@LAST_GTID.
MDEV-4726: Race in mysql-test/suite/rpl/t/rpl_gtid_stop_start.test
MDEV-5636: Deadlock in RESET MASTER
MASTER_GTID_WAIT() is similar to MASTER_POS_WAIT(), but works with a
GTID position rather than an old-style filename/offset.
@@LAST_GTID gives the GTID assigned to the last transaction written
into the binlog.
Together, the two can be used by applications to obtain the GTID of
an update on the master, and then do a MASTER_GTID_WAIT() for that
position on any read slave where it is important to get results that
are caught up with the master at least to the point of the update.
The implementation of MASTER_GTID_WAIT() is implemented in a way
that tries to minimise the performance impact on the SQL threads,
even in the presense of many waiters on single GTID positions (as
from @@LAST_GTID).
- CREATE TABLE is by default executed on the slave as CREATE OR REPLACE
- DROP TABLE is by default executed on the slave as DROP TABLE IF NOT EXISTS
This means that a slave will by default continue even if we try to create
a table that existed on the slave (the table will be deleted and re-created) or
if we try to drop a table that didn't exist on the slave.
This should be safe as instead of having the slave stop because of an inconsistency between
master and slave, it will fix the inconsistency.
Those that would prefer to get a stopped slave instead for the above cases can set slave_ddl_exec_mode to STRICT.
- Ensure that a CREATE OR REPLACE TABLE which dropped a table is replicated
- DROP TABLE that generated an error on master is handled as an identical DROP TABLE on the slave (IF NOT EXISTS is not added in this case)
- Added slave_ddl_exec_mode variable to decide how DDL's are replicated
New logic for handling BEGIN GTID ... COMMIT from the binary log:
- When we find a BEGIN GTID, we start a transaction and set OPTION_GTID_BEGIN
- When we find COMMIT, we reset OPTION_GTID_BEGIN and execute the normal COMMIT code.
- While OPTION_GTID_BEGIN is set:
- We don't generate implict commits before or after statements
- All tables are regarded as transactional tables in the binary log (to ensure things are executed exactly as on the master)
- We reset OPTION_GTID_BEGIN also on rollback
This will help ensuring that we don't get any sporadic commits (and thus new GTID's) on the slave and will help keep the GTID's between master and slave in sync.
mysql-test/extra/rpl_tests/rpl_log.test:
Added testing of mode slave_ddl_exec_mode=STRICT
mysql-test/r/mysqld--help.result:
New help messages
mysql-test/suite/rpl/r/create_or_replace_mix.result:
Testing of CREATE OR REPLACE TABLE with replication
mysql-test/suite/rpl/r/create_or_replace_row.result:
Testing of CREATE OR REPLACE TABLE with replication
mysql-test/suite/rpl/r/create_or_replace_statement.result:
Testing replication of create or replace
mysql-test/suite/rpl/r/rpl_gtid_startpos.result:
Test must be run in slave_ddl_exec_mode=STRICT as part of the test depends on that DROP TABLE should fail on slave.
mysql-test/suite/rpl/r/rpl_row_log.result:
Updated result
mysql-test/suite/rpl/r/rpl_row_log_innodb.result:
Updated result
mysql-test/suite/rpl/r/rpl_row_show_relaylog_events.result:
Updated result
mysql-test/suite/rpl/r/rpl_stm_log.result:
Updated result
mysql-test/suite/rpl/r/rpl_stm_mix_show_relaylog_events.result:
Updated result
mysql-test/suite/rpl/r/rpl_temp_table_mix_row.result:
Updated result
mysql-test/suite/rpl/t/create_or_replace.inc:
Testing of CREATE OR REPLACE TABLE with replication
mysql-test/suite/rpl/t/create_or_replace_mix.cnf:
Testing of CREATE OR REPLACE TABLE with replication
mysql-test/suite/rpl/t/create_or_replace_mix.test:
Testing of CREATE OR REPLACE TABLE with replication
mysql-test/suite/rpl/t/create_or_replace_row.cnf:
Testing of CREATE OR REPLACE TABLE with replication
mysql-test/suite/rpl/t/create_or_replace_row.test:
Testing of CREATE OR REPLACE TABLE with replication
mysql-test/suite/rpl/t/create_or_replace_statement.cnf:
Testing of CREATE OR REPLACE TABLE with replication
mysql-test/suite/rpl/t/create_or_replace_statement.test:
Testing of CREATE OR REPLACE TABLE with replication
mysql-test/suite/rpl/t/rpl_gtid_startpos.test:
Test must be run in slave_ddl_exec_mode=STRICT as part of the test depends on that DROP TABLE should fail on slave.
mysql-test/suite/rpl/t/rpl_stm_log.test:
Removed some lines
mysql-test/suite/sys_vars/r/slave_ddl_exec_mode_basic.result:
Testing of slave_ddl_exec_mode
mysql-test/suite/sys_vars/t/slave_ddl_exec_mode_basic.test:
Testing of slave_ddl_exec_mode
sql/handler.cc:
Regard all tables as transactional in commit if OPTION_GTID_BEGIN is set.
This is to ensure that statments are not commited too early if non transactional tables are used.
sql/log.cc:
Regard all tables as transactional in commit if OPTION_GTID_BEGIN is set.
Also treat 'direct' log events as transactional (to get them logged as they where on the master)
sql/log_event.cc:
Ensure that the new error from DROP TABLE when trying to drop a view is treated same as the old one.
Store error code that slave expects in THD.
Set OPTION_GTID_BEGIN if we find a BEGIN.
Reset OPTION_GTID_BEGIN if we find a COMMIT.
sql/mysqld.cc:
Added slave_ddl_exec_mode_options
sql/mysqld.h:
Added slave_ddl_exec_mode_options
sql/rpl_gtid.cc:
Reset OPTION_GTID_BEGIN if we record a gtid (safety)
sql/sql_class.cc:
Regard all tables as transactional in commit if OPTION_GTID_BEGIN is set.
sql/sql_class.h:
Added to THD: log_current_statement and slave_expected_error
sql/sql_insert.cc:
Ensure that CREATE OR REPLACE is logged if table was deleted.
Don't do implicit commit for CREATE if we are under OPTION_GTID_BEGIN
sql/sql_parse.cc:
Change CREATE TABLE -> CREATE OR REPLACE TABLE for slaves
Change DROP TABLE -> DROP TABLE IF EXISTS for slaves
CREATE TABLE doesn't force implicit commit in case of OPTION_GTID_BEGIN
Don't do commits before or after any statement if OPTION_GTID_BEGIN was set.
sql/sql_priv.h:
Added OPTION_GTID_BEGIN
sql/sql_show.cc:
Enhanced store_create_info() to also be able to handle CREATE OR REPLACE
sql/sql_show.h:
Updated prototype
sql/sql_table.cc:
Ensure that CREATE OR REPLACE is logged if table was deleted.
sql/sys_vars.cc:
Added slave_ddl_exec_mode
sql/transaction.cc:
Added warning if we got a GTID under OPTION_GTID_BEGIN
The problem was a race between the SQL driver thread and the worker threads.
The SQL driver thread would set rli->last_master_timestamp to zero to
mark that it has caught up with the master, while the worker threads would
set it to the timestamp of the executed event. This can happen out-of-order
in parallel replication, causing the "caught up" status to be overwritten
and Seconds_Behind_Master to wrongly grow when the slave is idle.
To fix, introduce a separate flag rli->sql_thread_caught_up to mark that the
SQL driver thread is caught up. This avoids issues with worker threads
overwriting the SQL driver thread status. In parallel replication, we then
make SHOW SLAVE STATUS check in addition that all worker threads are idle
before showing Seconds_Behind_Master as 0 due to slave idle.
Add another test case.
Fix bug found: When one thread aborts, another thread might
wrongly advance the relay log position too far, causing the
fauling transaction to be skipped and thus lost upon
restarting the SQL thread after the failure.
