This bug had two problems:
P1) Reads out of bounds;
P2) Writes out of bounds.
PROBLEM P1
----------
User_var_log_event unmarshalling from binlog was not performing range
checks when using name_len and val_len variables to walk on event
buffer.
Added range checks to User_var_log_event unmarshalling to prevent
unmarshalling errors.
PROBLEM P2
----------
User_var_log_event value was allocated on thread stack, what caused
stack frame errors when User_var_log_event value was bigger than thread
stack size.
Currently value is allocated on heap memory.
.. into MariaDB 5.3
Fix for Bug#12667154 SAME QUERY EXEC AS WHERE SUBQ GIVES DIFFERENT
RESULTS ON IN() & NOT IN() COMP #3
This bug causes a wrong result in mysql-trunk when ICP is used
and bad performance in mysql-5.5 and mysql-trunk.
Using the query from bug report to explain what happens and causes
the wrong result from the query when ICP is enabled:
1. The t3 table contains four records. The outer query will read
these and for each of these it will execute the subquery.
2. Before the first execution of the subquery it will be optimized. In
this case the important is what happens to the first table t1:
-make_join_select() will call the range optimizer which decides
that t1 should be accessed using a range scan on the k1 index
It creates a QUICK_RANGE_SELECT object for this.
-As the last part of optimization the ICP code pushes the
condition down to the storage engine for table t1 on the k1 index.
This produces the following information in the explain for this table:
2 DEPENDENT SUBQUERY t1 range k1 k1 5 NULL 3 Using index condition; Using filesort
Note the use of filesort.
3. The first execution of the subquery does (among other things) due
to the need for sorting:
a. Call create_sort_index() which again will call find_all_keys():
b. find_all_keys() will read the required keys for all qualifying
rows from the storage engine. To do this it checks if it has a
quick-select for the table. It will use the quick-select for
reading records. In this case it will read four records from the
storage engine (based on the range criteria). The storage engine
will evaluate the pushed index condition for each record.
c. At the end of create_sort_index() there is code that cleans up a
lot of stuff on the join tab. One of the things that is cleaned
is the select object. The result of this is that the
quick-select object created in make_join_select is deleted.
4. The second execution of the subquery does the same as the first but
the result is different:
a. Call create_sort_index() which again will call find_all_keys()
(same as for the first execution)
b. find_all_keys() will read the keys from the storage engine. To
do this it checks if it has a quick-select for the table. Now
there is NO quick-select object(!) (since it was deleted in
step 3c). So find_all_keys defaults to read the table using a
table scan instead. So instead of reading the four relevant records
in the range it reads the entire table (6 records). It then
evaluates the table's condition (and here it goes wrong). Since
the entire condition has been pushed down to the storage engine
using ICP all 6 records qualify. (Note that the storage engine
will not evaluate the pushed index condition in this case since
it was pushed for the k1 index and now we do a table scan
without any index being used).
The result is that here we return six qualifying key values
instead of four due to not evaluating the table's condition.
c. As above.
5. The two last execution of the subquery will also produce wrong results
for the same reason.
Summary: The problem occurs due to all but the first executions of the
subquery is done as a table scan without evaluating the table's
condition (which is pushed to the storage engine on a different
index). This is caused by the create_sort_index() function deleting
the quick-select object that should have been used for executing the
subquery as a range scan.
Note that this bug in addition to causing wrong results also can
result in bad performance due to executing the subquery using a table
scan instead of a range scan. This is an issue in MySQL 5.5.
The fix for this problem is to avoid that the Quick-select-object that
the optimizer created is deleted when create_sort_index() is doing
clean-up of the join-tab. This will ensure that the quick-select
object and the corresponding pushed index condition will be available
and used by all following executions of the subquery.
PRIVILEGES
Description: (user,host) pair from security context is used
privilege checking at the time of granting or
revoking proxy privileges. This creates problem
when server is started with
--skip-name-resolve option because host will not
contain any value. Checks should be dependent on
consistent values regardless the way server is
started. Further, privilege check should use
(priv_user,priv_host) pair rather than values
obtained from inbound connection because
this pair represents the correct account context
obtained from mysql.user table.
CONSISTENT SNAPSHOT OPTION
A transaction is started with a consistent snapshot. After
the transaction is started new indexes are added to the
table. Now when we issue an update statement, the optimizer
chooses an index. When the index scan is being initialized
via ha_innobase::change_active_index(), InnoDB reports
the error code HA_ERR_TABLE_DEF_CHANGED, with message
stating that "insufficient history for index".
This error message is propagated up to the SQL layer. But
the my_error() api is never called. The statement level
diagnostics area is not updated with the correct error
status (it remains in Diagnostics_area::DA_EMPTY).
Hence the following check in the Protocol::end_statement()
fails.
516 case Diagnostics_area::DA_EMPTY:
517 default:
518 DBUG_ASSERT(0);
519 error= send_ok(thd->server_status, 0, 0, 0, NULL);
520 break;
The fix is to backport the fix of bugs 14365043, 11761652
and 11746399.
14365043 PROTOCOL::END_STATEMENT(): ASSERTION `0' FAILED
11761652 HA_RND_INIT() RESULT CODE NOT CHECKED
11746399 RETURN VALUES OF HA_INDEX_INIT() AND INDEX_INIT() IGNORED
rb://1227 approved by guilhem and mattiasj.
cmake/cpack_rpm.cmake:
* mark all cnf files with %config(noreplace)
* add the forgotten postun script
sql/sys_vars.cc:
0 for a string variable means "no default. But datadir has the default value.
support-files/rpm/server-postin.sh:
* use mysqld --help to determine the correct datadir in the presence of my.cnf files
(better than my_print_defaults, because it considers the correct group set).
* Only create users, and chown/chmod if it's a fresh install, not an upgrade.
* only run mysql_install_db if datadir does not exist
- Wrong thd uses in Item_subselect, could lead to crash
- Inititalize uninitialized variable in new autoincrement handling code
sql/handler.cc:
More DBUG_PRINT
sql/item_subselect.cc:
Wrong thd uses in Item_subselect, could lead to crash
storage/innobase/handler/ha_innodb.cc:
Initialize variable needed by upper level. This only happens when auto-increment value wraps over.
storage/xtradb/handler/ha_innodb.cc:
Initialize variable needed by upper level. This only happens when auto-increment value wraps over.
When a SP handler is activated, memory is allocated to hold the
MESSAGE_TEXT for the condition that caused the activation.
The problem was that this memory was allocated on the MEM_ROOT belonging
to the stored program. Since this MEM_ROOT is not freed until the
stored program ends, a stored program that causes lots of handler
activations can start using lots of memory. In 5.1 and earlier the
problem did not exist as no MESSAGE_TEXT was allocated if a condition
was raised with a handler present. However, this behavior lead to
a number of other issues such as Bug#23032.
This patch fixes the problem by allocating enough memory for the
necessary MESSAGE_TEXTs in the SP MEM_ROOT when the SP starts and
then re-using this memory each time a handler is activated.
This is the 5.5 version of the patch.
Documentation of the feature can be found at: http://kb.askmonty.org/en/multi-source-replication/
This code is based on code from Taobao, developed by Plinux
Other things:
- Added new commands: START ALL SLAVES, STOP ALL SLAVES and SHOW FULL SLAVE STATUS
- Almost all usage of 'active_mi' is deleted.
- Added parameter to reset_logs() so that one can specify if new logs should be created.
- Check wildcard match as early as possible for SHOW STATUS. This makes SHOW STATUS like 'xxx' a lot faster and use less mutex
- Made max_relay_log_size depending on master connection.
- Added sys_vars.default_master_connection_basic to fix a failure in sys_vars.all_vars, modified sql_slave_skip_counter_basic to allow session-level settings
- Added commands to mysqladmin: start-all-slaves & stop-all-slaves
- Removed logging of "next log '%s' is currently active | not active"
- Fixed bug in my_vsnprintf() when using positional parameters with length
- Added fn_ext2(), which returns pointer to last '.' in file name
- max_relay_log_size now acts as a normal slave specific variable
- Don't store replication position if innobase_overwrite_relay_log_info is not set
- max_relay_log_size copies it's values from max_binlog_size at startup
BUILD/SETUP.sh:
Added -Wno-invalid-offsetof to get rid of warning of offsetof() on C++ class (safe in the contex we use it)
client/mysqladmin.cc:
Added commands start-all-slaves & stop-all-slaves
client/mysqltest.cc:
Added support for error names starting with 'W'
Added connection_name support to --sync_with_master
cmake/maintainer.cmake:
Added -Wno-invalid-offsetof to get rid of warning of offsetof() on C++ class (safe in the contex we use it)
include/my_sys.h:
Added fn_ext2(), which returns pointer to last '.' in file name
include/mysql/plugin.h:
Added SHOW_SIMPLE_FUNC
include/mysql/plugin_audit.h.pp:
Updated signature file
include/mysql/plugin_auth.h.pp:
Updated signature file
include/mysql/plugin_ftparser.h.pp:
Updated signature file
mysql-test/extra/rpl_tests/rpl_max_relay_size.test:
Updated test
mysql-test/include/setup_fake_relay_log.inc:
There is no orphan relay log files anymore
mysql-test/mysql-test-run.pl:
Added multi_source to test suite
mysql-test/r/flush.result:
Added test for new syntax of flush relay logs (can't repeat relay logs or slave)
mysql-test/r/mysqld--help.result:
Updated result
mysql-test/r/mysqltest.result:
Updated result
mysql-test/r/parser.result:
Updated result
mysql-test/r/signal_code.result:
Updated result after introducing new commands
mysql-test/r/sp-code.result:
Updated result after introducing new commands
mysql-test/suite/multi_source:
Tests for multi-source
mysql-test/suite/multi_source/info_logs-master.opt:
Test with strange file names
mysql-test/suite/multi_source/info_logs.result:
Test of logs
mysql-test/suite/multi_source/info_logs.test:
Test of logs
mysql-test/suite/multi_source/my.cnf:
Setup of multi-master tests
Added log-warnings to get more information to the log files
mysql-test/suite/multi_source/relaylog_events.result:
Test relay log handling
mysql-test/suite/multi_source/relaylog_events.test:
Test relay log handling
mysql-test/suite/multi_source/reset_slave.result:
Test RESET SLAVE
mysql-test/suite/multi_source/reset_slave.test:
Test RESET SLAVE
mysql-test/suite/multi_source/simple.result:
Simple basic test of multi-source functionality
mysql-test/suite/multi_source/simple.test:
Simple basic test of multi-source functionality
mysql-test/suite/multi_source/skip_counter.result:
Testing skip_counter and max_relay_log_size
mysql-test/suite/multi_source/skip_counter.test:
Testing skip_counter and max_relay_log_size
mysql-test/suite/multi_source/syntax.result:
Test of multi-source syntax
mysql-test/suite/multi_source/syntax.test:
Test of multi-source syntax
mysql-test/suite/rpl/r/rpl_deadlock_innodb.result:
New warnings
mysql-test/suite/rpl/r/rpl_filter_dbs_dynamic.result:
Improved error texts
mysql-test/suite/rpl/r/rpl_filter_tables_dynamic.result:
Improved error texts
mysql-test/suite/rpl/r/rpl_filter_wild_tables_dynamic.result:
Improved error texts
mysql-test/suite/rpl/r/rpl_flush_logs.result:
Update results
mysql-test/suite/rpl/r/rpl_heartbeat.result:
Warning was removed
mysql-test/suite/rpl/r/rpl_heartbeat_basic.result:
Warning was removed
mysql-test/suite/rpl/r/rpl_rotate_logs.result:
Updated results because of new error messages
mysql-test/suite/rpl/r/rpl_row_max_relay_size.result:
Updated results
mysql-test/suite/rpl/r/rpl_row_show_relaylog_events.result:
Updated results after improved RESET SLAVE (we now use less relay log files)
mysql-test/suite/rpl/r/rpl_skip_replication.result:
New error message
mysql-test/suite/rpl/r/rpl_start_slave_deadlock_sys_vars.result:
Test removed as the old DBUG_SYNC entries doesn't exist anymore
mysql-test/suite/rpl/r/rpl_stm_max_relay_size.result:
Updated results
mysql-test/suite/rpl/r/rpl_stm_mix_show_relaylog_events.result:
Updated results after improved RESET SLAVE (we now use less relay log files)
mysql-test/suite/rpl/t/rpl_flush_logs.test:
Updated tests as relay log files is created a bit differently than before
mysql-test/suite/rpl/t/rpl_start_slave_deadlock_sys_vars.test:
Test removed as the old DBUG_SYNC entries doesn't exist anymore
mysql-test/suite/sys_vars/r/default_master_connection_basic.result:
New test to test usage of default_master_connection
mysql-test/suite/sys_vars/r/max_relay_log_size_basic.result:
Updated results
mysql-test/suite/sys_vars/r/sql_slave_skip_counter_basic.result:
Updated usage of sql_slave_skip_counter
mysql-test/suite/sys_vars/t/default_master_connection_basic.test:
New test to test usage of default_master_connection
mysql-test/suite/sys_vars/t/max_relay_log_size_basic.test:
Updated results
mysql-test/suite/sys_vars/t/sql_slave_skip_counter_basic.test:
Updated test for multi-source
mysql-test/t/flush.test:
Added test for new syntax of flush relay logs (can't repeat relay logs or slave)
mysql-test/t/parser.test:
Updated test as master_pos_wait() now takes more arguments than before
mysys/mf_fn_ext.c:
Added fn_ext2(), which returns pointer to last '.' in file name
plugin/semisync/semisync_master_plugin.cc:
Use SHOW_SIMPLE_FUNC to optimize SHOW STATUS
sql/event_scheduler.cc:
No reason to initialize slave_thread (it's guaranteed to be zero here)
sql/item_create.cc:
Added connection_name argument to master_pos_wait()
Simplified code
sql/item_func.cc:
Added connection_name argument to master_pos_wait()
sql/item_func.h:
Added connection_name argument to master_pos_wait()
sql/lex.h:
Added SLAVES keyword
sql/log.cc:
Added tag "Master 'connection_name'" to slave errors that has a connection name.
Added parameter to reset_logs() so that one can specify if new logs should be created.
Removed some wrong casts
Changed some constants to defines
sql/log.h:
Added parameter to reset_logs()
Updated comment to reflect new code
sql/log_event.cc:
Updated DBUG_PRINT
sql/mysqld.cc:
Added variable mysqld_server_initialized so that other functions can test if server is fully initialized.
Free all slave data in one place (fewer ifdef's)
Removed not needed call to close_active_mi()
Initialize slaves() later in startup to ensure that everthing is really initialized when slaves start.
Made status variable slave_running multi-source safe
max_relay_log_size copies it's values from max_binlog_size at startup
SHOW_FUNC -> SHOW_SIMPLE_FUNC
sql/mysqld.h:
Added mysqld_server_initialized
Removed max_relay_log_size
sql/rpl_mi.cc:
Store connection name and cmp_connection_name (only used for show full slave status) in Master_info
Added code for Master_info_index, which handles storage of multi-master information
Don't write the empty "" connection_name to multi-master.info file. This is handled by the original code.
Create Master_info_index::index_file_names once at init
More DBUG_PRINT
Give error if Master_info_index::check_duplicate_master_info fails
Added start|stop all slaves
sql/rpl_mi.h:
Added connection_name and Master_info_index
Updated prototypes
sql/rpl_rli.cc:
Added connection_name to relay log files.
If we do a full reset, don't create any new relay log files.
Updated comment to reflect new code
Made max_relay_log_size depending on master connection.
sql/rpl_rli.h:
Fixed type of slave_skip_counter as we now access it directly in sys_vars.cc, so it must be ulong
Made executed_entries and max_relay_log_size depending on master connection.
sql/set_var.cc:
Fixed that one can get variable name also when one uses DEFAULT
sql/set_var.h:
Made option global so that one can check and change min & max values (sorry Sergei)
sql/share/errmsg-utf8.txt:
Added new error messages needed for multi-source
Added multi-source name to error ER_MASTER_INFO and WARN_NO_MASTER_INFO
Improved error message if connection exists
sql/slave.cc:
Moved things a bit around to make it easier to handle error conditions.
Create a global master_info_index and add the "" connection to it
Ensure that new Master_info doesn't fail.
Don't call terminate_slave_threads(active_mi..) on end_slave() as this is now done automaticly when deleting master_info_index.
Delete not needed function close_active_mi(). One can achive same thing by calling end_slave().
Added support for SHOW FULL SLAVE STATUS (show status for all master connections with connection_name as first column)
Removed logging of "next log '%s' is currently active | not active"
Added Slave_received_heartbeats and Slave_heartbeat_period
sql/slave.h:
Added new defines and prototypes
sql/sql_base.cc:
More DBUG_PRINT
sql/sql_class.cc:
Reset thd->connection_name and thd-->default_master_connection
sql/sql_class.h:
Added thd->connection_name and thd-->default_master_connection
Made slave_skip_count and max_relay_log_size depending on master connection. These variables are in THD to make changing them thread safe.
sql/sql_const.h:
Added MAX_CONNECTION_NAME
sql/sql_insert.cc:
thd->slave_thread -> thd->rli_slave
Removed usage of active_mi
sql/sql_lex.cc:
Reset 'lex->verbose' (to simplify some sql_yacc.yy code)
sql/sql_lex.h:
Added connection_name, relay_log_connection_name, SQLCOM_SLAVE_ALL_START and SQLCOM_SLAVE_ALL_STOP
sql/sql_load.cc:
thd->slave_thread -> thd->rli_slave
Removed usage of active_mi
sql/sql_parse.cc:
Added support for connection_name to all SLAVE commands.
- Instead of using active_mi, we now get the current Master_info from master_info_index.
- Create new replication threads with CHANGE MASTER
- Added support for show_all_master_info()-
sql/sql_prepare.cc:
Added SQLCOM_SLAVE_ALL_START and SQLCOM_SLAVE_ALL_STOP
sql/sql_reload.cc:
Made reset/full slave use master_info_index->get_master_info() instead of active_mi.
If one uses 'RESET SLAVE "connection_name" all' the connection is removed from master_info_index.
Fixed issues with FLUSH RELAY LOGS
sql/sql_repl.cc:
sql_slave_skip_counter is moved to thd->variables to make it thread safe and fix some bugs with it
Add connection name to relay log files.
Added connection name to errors.
Added some logging for multi-master if log_warnings > 1
stop_slave():
- Don't check if thd is set. It's guaranteed to always be set.
change_master():
- Check for duplicate connection names in change_master()
- Check for wrong arguments first in file (to simplify error handling)
- Register new connections in master_info_index
******
Added multi-source support to show relaylog events
******
check_duplicate_master_info() now generates an error
Added parameter to reset_logs()
******
Updated calls to create_signed_file_name()
sql/sql_show.cc:
Check wildcard match as early as possible for SHOW STATUS. This makes SHOW STATUS like 'xxx' a lot faster and use less mutex
sql/sql_yacc.yy:
Added optional connection_name to a all relevant master/slave commands
Added multi-source support to show relaylog events
Added new commands START ALL SLAVES, STOP ALL SLAVES and SHOW FULL SLAVE STATUS
sql/strfunc.cc:
my_global.h shoud always be included first.
sql/sys_vars.cc:
Added variable default_master_connection
Made variable sql_slave_skip_counter multi-source safe
Made max_relay_log_size depending on master connection.
Made old code more reusable
sql/sys_vars.h:
Added Sys_var_session_lexstring (needed for default_master_connection)
Added Sys_var_multi_source_uint (needed for sql_slave_skip_counter).
Changed Sys_var_multi_source_uint to ulong to be able to handle max_relay_log_size
Made old code more reusable
storage/example/ha_example.cc:
Use SHOW_SIMPLE_FUNC to optimize SHOW STATUS
storage/sphinx/ha_sphinx.cc:
Use SHOW_SIMPLE_FUNC to optimize SHOW STATUS
storage/xtradb/handler/ha_innodb.cc:
Don't store replication position if innobase_overwrite_relay_log_info is not set
strings/my_vsnprintf.c:
Fixed bug when using positional parameters with length
This bug depends on cmake version.
For cmake 2.6 (which is still in use for some pushbuild trees)
the main build would succeed, even if create_initial_db failed.
The problem was the chaining of commands in the CUSTOM_COMMAND
to produce 'initdb.dep'. It first invokes cmake to run mysqld,
then invokes 'touch' to create the file. Moving the 'touch'
command makes the error propagate properly for both cmake 2.6 and 2.8
Follow-up patch - Fix broken build:
error: format ‘%u’ expects argument of type ‘unsigned int’,
but argument 2 has type ‘key_part_map {aka long unsigned int}’
[-Werror=format]
This allows us to avoid calculating variables (including those involving mutex) that doesn't match the given
wildcard in SHOW STATUS LIKE '...'
Removed all references to active_mi that could cause problems for multi-source replication.
Added START|STOP ALL SLAVES
Added SHOW ALL SLAVES STATUS
include/mysql/plugin.h:
Added SHOW_SIMPLE_FUNC
include/mysql/plugin_audit.h.pp:
Updated .pp file
include/mysql/plugin_auth.h.pp:
Updated .pp file
include/mysql/plugin_ftparser.h.pp:
Updated .pp file
mysql-test/suite/multi_source/info_logs.result:
New columns in SHOW ALL SLAVES STATUS
mysql-test/suite/multi_source/info_logs.test:
Test new syntax
mysql-test/suite/multi_source/simple.result:
New columns in SHOW ALL SLAVES STATUS
mysql-test/suite/multi_source/simple.test:
test new syntax
mysql-test/suite/multi_source/syntax.result:
Updated result
mysql-test/suite/multi_source/syntax.test:
Test new syntax
mysql-test/suite/rpl/r/rpl_skip_replication.result:
Updated result
plugin/semisync/semisync_master_plugin.cc:
SHOW_FUNC -> SHOW_SIMPLE_FUNC
sql/item_create.cc:
Simplify code
sql/lex.h:
Added SLAVES keyword
sql/log.cc:
Constant -> define
sql/log_event.cc:
Added comment
sql/mysqld.cc:
SHOW_FUNC -> SHOW_SIMPLE_FUNC
Made slave_retried_trans, slave_received_heartbeats and heartbeat_period multi-source safe
Clear variable denied_connections and slave_retried_transactions on startup
sql/mysqld.h:
Added slave_retried_transactions
sql/rpl_mi.cc:
create_signed_file_name -> create_logfile_name_with_suffix
Added start_all_slaves() and stop_all_slaves()
sql/rpl_mi.h:
Added prototypes
sql/rpl_rli.cc:
create_signed_file_name -> create_logfile_name_with_suffix
added executed_entries
sql/rpl_rli.h:
Added executed_entries
sql/share/errmsg-utf8.txt:
More and better error messages
sql/slave.cc:
Added more fields to SHOW ALL SLAVES STATUS
Added slave_retried_transactions
Changed constants -> defines
sql/sql_class.h:
Added comment
sql/sql_insert.cc:
active_mi.rli -> thd->rli_slave
sql/sql_lex.h:
Added SQLCOM_SLAVE_ALL_START & SQLCOM_SLAVE_ALL_STOP
sql/sql_load.cc:
active_mi.rli -> thd->rli_slave
sql/sql_parse.cc:
Added START|STOP ALL SLAVES
sql/sql_prepare.cc:
Added SQLCOM_SLAVE_ALL_START & SQLCOM_SLAVE_ALL_STOP
sql/sql_reload.cc:
Made REFRESH RELAY LOG multi-source safe
sql/sql_repl.cc:
create_signed_file_name -> create_logfile_name_with_suffix
Don't send my_ok() from start_slave() or stop_slave() so that we can call it for all master connections
sql/sql_show.cc:
Compare wild cards early for all variables
sql/sql_yacc.yy:
Added START|STOP ALL SLAVES
Added SHOW ALL SLAVES STATUS
sql/sys_vars.cc:
Made replicate_events_marked_for_skip,slave_net_timeout and rpl_filter multi-source safe.
sql/sys_vars.h:
Simplify Sys_var_rpl_filter
mysql-test/suite/innodb/include/restart_and_reinit.inc:
drop and recreate mysql.innodb* tables when deleting innodb table spaces
mysql-test/t/ssl_8k_key-master.opt:
with loose- prefix ssl errors are ignored
sql-common/client.c:
compiler warnings
sql/field.cc:
use the new function
sql/item.cc:
don't convert time to double or decimal via longlong,
this loses sub-second part.
Use dedicated functions.
sql/item.h:
incorrect cast_to_int type for params
sql/item_strfunc.cc:
use the new function
sql/lex.h:
unused
sql/my_decimal.h:
helper macro
sql/sql_plugin.cc:
workaround for a compiler warning
sql/sql_yacc.yy:
unused
sql/transaction.cc:
fix the merge for SERVER_STATUS_IN_TRANS_READONLY protocol flag
storage/sphinx/CMakeLists.txt:
compiler warnings
n_child_sum_items kept increasing.
Since it is used for calculating the size of ref_pointer_array,
we will allocate larger and larger chunks of memory, until we hit some
operating system limit.
The memory is free()d at disconnect, but is most likely *not*
returned to the operating system.
Changed names of multi-source log files so that original suffixes are kept.
include/my_sys.h:
Added fn_ext2(), which returns pointer to last '.' in file name
mysql-test/extra/rpl_tests/rpl_max_relay_size.test:
Updated test
mysql-test/suite/multi_source/info_logs-master.opt:
Test with strange file names
mysql-test/suite/multi_source/info_logs.result:
Updated results
mysql-test/suite/multi_source/info_logs.test:
Changed to test with complex names to be able to verify the filename generator code
mysql-test/suite/multi_source/relaylog_events.result:
Updated results
mysql-test/suite/multi_source/reset_slave.result:
Updated results
mysql-test/suite/multi_source/skip_counter.result:
Updated results
mysql-test/suite/multi_source/skip_counter.test:
Added testing of max_relay_log_size
mysql-test/suite/rpl/r/rpl_row_max_relay_size.result:
Updated results
mysql-test/suite/rpl/r/rpl_stm_max_relay_size.result:
Updated results
mysql-test/suite/sys_vars/r/max_relay_log_size_basic.result:
Updated results
mysql-test/suite/sys_vars/t/max_relay_log_size_basic.test:
Updated results
mysys/mf_fn_ext.c:
Added fn_ext2(), which returns pointer to last '.' in file name
sql/log.cc:
Removed some wrong casts
sql/log.h:
Updated comment to reflect new code
sql/log_event.cc:
Updated DBUG_PRINT
sql/mysqld.cc:
Added that max_relay_log_size copies it's values from max_binlog_size
sql/mysqld.h:
Removed max_relay_log_size
sql/rpl_mi.cc:
Changed names of multi-source log files so that original suffixes are kept.
sql/rpl_mi.h:
Updated prototype
sql/rpl_rli.cc:
Updated comment to reflect new code
Made max_relay_log_size depending on master connection.
sql/rpl_rli.h:
Made max_relay_log_size depending on master connection.
sql/set_var.h:
Made option global so that one can check and change min & max values (sorry Sergei)
sql/sql_class.h:
Made max_relay_log_size depending on master connection.
sql/sql_repl.cc:
Updated calls to create_signed_file_name()
sql/sys_vars.cc:
Made max_relay_log_size depending on master connection.
Made old code more reusable
sql/sys_vars.h:
Changed Sys_var_multi_source_uint to ulong to be able to handle max_relay_log_size
Made old code more reusable
In some rare cases when the value of the system variable join_buffer_size
was set to a number less than 256 the function JOIN_CACHE::set_constants
determined the size of an offset in the join buffer equal to 1 though
the minimal join buffer required more than 256 bytes. This could cause
a crash of the server when records from the join buffer were read.
- Added parameter to reset_logs() so that one can specify if new logs should be created.
mysql-test/include/setup_fake_relay_log.inc:
There is no orphan relay log files anymore
mysql-test/mysql-test-run.pl:
Added multi_source to test suite
mysql-test/suite/multi_source/info_logs.result:
New test
mysql-test/suite/multi_source/info_logs.test:
New test
mysql-test/suite/multi_source/my.cnf:
Added log-warnings to get more information to the log files
mysql-test/suite/multi_source/relaylog_events.result:
Added cleanup
mysql-test/suite/multi_source/relaylog_events.test:
Added cleanup
mysql-test/suite/multi_source/reset_slave.result:
Updated results after improved RESET SLAVE
mysql-test/suite/multi_source/simple.result:
Updated results after improved RESET SLAVE
mysql-test/suite/multi_source/simple.test:
Syncronize positions before show full slave status
mysql-test/suite/rpl/r/rpl_row_show_relaylog_events.result:
Updated results after improved RESET SLAVE (we now use less relay log files)
mysql-test/suite/rpl/r/rpl_stm_mix_show_relaylog_events.result:
Updated results after improved RESET SLAVE (we now use less relay log files)
sql/log.cc:
Added parameter to reset_logs() so that one can specify if new logs should be created.
sql/log.h:
Added parameter to reset_logs()
sql/rpl_mi.cc:
Create Master_info_index::index_file_names once at init
More DBUG_PRINT
Give error if Master_info_index::check_duplicate_master_info fails
sql/rpl_rli.cc:
If we do a full reset, don't create any new relay log files.
sql/share/errmsg-utf8.txt:
Improved error message if connection exists
sql/sql_parse.cc:
Fixed memory leak
sql/sql_repl.cc:
check_duplicate_master_info() now generates an error
Added parameter to reset_logs()
Documentation of the feature can be found at: http://kb.askmonty.org/en/multi-source-replication/
This code is based on code from Taobao, developed by Plinux
BUILD/SETUP.sh:
Added -Wno-invalid-offsetof to get rid of warning of offsetof() on C++ class (safe in the contex we use it)
client/mysqltest.cc:
Added support for error names starting with 'W'
Added connection_name support to --sync_with_master
cmake/maintainer.cmake:
Added -Wno-invalid-offsetof to get rid of warning of offsetof() on C++ class (safe in the contex we use it)
mysql-test/r/mysqltest.result:
Updated results
mysql-test/r/parser.result:
Updated results
mysql-test/suite/multi_source/my.cnf:
Setup of multi-master tests
mysql-test/suite/multi_source/simple.result:
Simple basic test of multi-source functionality
mysql-test/suite/multi_source/simple.test:
Simple basic test of multi-source functionality
mysql-test/suite/multi_source/syntax.result:
Test of multi-source syntax
mysql-test/suite/multi_source/syntax.test:
Test of multi-source syntax
mysql-test/suite/rpl/r/rpl_rotate_logs.result:
Updated results because of new error messages
mysql-test/t/parser.test:
Updated test as master_pos_wait() now takes more arguments than before
sql/event_scheduler.cc:
No reason to initialize slave_thread (it's guaranteed to be zero here)
sql/item_create.cc:
Added connection_name argument to master_pos_wait()
Simplified code
sql/item_func.cc:
Added connection_name argument to master_pos_wait()
sql/item_func.h:
Added connection_name argument to master_pos_wait()
sql/log.cc:
Added tag "Master 'connection_name'" to slave errors that has a connection name.
sql/mysqld.cc:
Added variable mysqld_server_initialized so that other functions can test if server is fully initialized.
Free all slave data in one place (fewer ifdef's)
Removed not needed call to close_active_mi()
Initialize slaves() later in startup to ensure that everthing is really initialized when slaves start.
Made status variable slave_running multi-source safe
sql/mysqld.h:
Added mysqld_server_initialized
sql/rpl_mi.cc:
Store connection name and cmp_connection_name (only used for show full slave status) in Master_info
Added code for Master_info_index, which handles storage of multi-master information
Don't write the empty "" connection_name to multi-master.info file. This is handled by the original code.
sql/rpl_mi.h:
Added connection_name and Master_info_index
sql/rpl_rli.cc:
Added connection_name to relay log files.
sql/rpl_rli.h:
Fixed type of slave_skip_counter as we now access it directly in sys_vars.cc, so it must be uint
sql/share/errmsg-utf8.txt:
Added new error messages needed for multi-source
Added multi-source name to error ER_MASTER_INFO and WARN_NO_MASTER_INFO
sql/slave.cc:
Moved things a bit around to make it easier to handle error conditions.
Create a global master_info_index and add the "" connection to it
Ensure that new Master_info doesn't fail.
Don't call terminate_slave_threads(active_mi..) on end_slave() as this is now done automaticly when deleting master_info_index.
Delete not needed function close_active_mi(). One can achive same thing by calling end_slave().
Added support for SHOW FULL SLAVE STATUS (show status for all master connections with connection_name as first column)
sql/slave.h:
Added new prototypes
sql/sql_base.cc:
More DBUG_PRINT
sql/sql_class.cc:
Reset thd->connection_name and thd-->default_master_connection
sql/sql_class.h:
Added thd->connection_name and thd-->default_master_connection
Added slave_skip_count to variables to make changing the @@sql_slave_skip_count variable thread safe
sql/sql_const.h:
Added MAX_CONNECTION_NAME
sql/sql_lex.cc:
Reset 'lex->verbose' (to simplify some sql_yacc.yy code)
sql/sql_lex.h:
Added connection_name
sql/sql_parse.cc:
Added support for connection_name to all SLAVE commands.
- Instead of using active_mi, we now get the current Master_info from master_info_index.
- Create new replication threads with CHANGE MASTER
- Added support for show_all_master_info()
sql/sql_reload.cc:
Made reset/full slave use master_info_index->get_master_info() instead of active_mi.
If one uses 'RESET SLAVE "connection_name" all' the connection is removed from master_info_index.
sql/sql_repl.cc:
sql_slave_skip_counter is moved to thd->variables to make it thread safe and fix some bugs with it
Add connection name to relay log files.
Added connection name to errors.
Added some logging for multi-master if log_warnings > 1
stop_slave():
- Don't check if thd is set. It's guaranteed to always be set.
change_master():
- Check for duplicate connection names in change_master()
- Check for wrong arguments first in file (to simplify error handling)
- Register new connections in master_info_index
sql/sql_yacc.yy:
Added optional connection_name to a all relevant master/slave commands
sql/strfunc.cc:
my_global.h shoud always be included first.
sql/sys_vars.cc:
Added variable default_master_connection
Made variable sql_slave_skip_counter multi-source safe
sql/sys_vars.h:
Added Sys_var_session_lexstring (needed for default_master_connection)
Added Sys_var_multi_source_uint (needed for sql_slave_skip_counter).
and small collateral changes
mysql-test/lib/My/Test.pm:
somehow with "print" we get truncated writes sometimes
mysql-test/suite/perfschema/r/digest_table_full.result:
md5 hashes of statement digests differ, because yacc token codes are different in mariadb
mysql-test/suite/perfschema/r/dml_handler.result:
host table is not ported over yet
mysql-test/suite/perfschema/r/information_schema.result:
host table is not ported over yet
mysql-test/suite/perfschema/r/nesting.result:
this differs, because we don't rewrite general log queries, and multi-statement
packets are logged as a one entry. this result file is identical to what mysql-5.6.5
produces with the --log-raw option.
mysql-test/suite/perfschema/r/relaylog.result:
MariaDB modifies the binlog index file directly, while MySQL 5.6 has a feature "crash-safe binlog index" and modifies a special "crash-safe" shadow copy of the index file and then moves it over. That's why this test shows "NONE" index file writes in MySQL and "MANY" in MariaDB.
mysql-test/suite/perfschema/r/server_init.result:
MariaDB initializes the "manager" resources from the "manager" thread, and starts this thread only when --flush-time is not 0. MySQL 5.6 initializes "manager" resources unconditionally on server startup.
mysql-test/suite/perfschema/r/stage_mdl_global.result:
this differs, because MariaDB disables query cache when query_cache_size=0. MySQL does not
do that, and this causes useless mutex locks and waits.
mysql-test/suite/perfschema/r/statement_digest.result:
md5 hashes of statement digests differ, because yacc token codes are different in mariadb
mysql-test/suite/perfschema/r/statement_digest_consumers.result:
md5 hashes of statement digests differ, because yacc token codes are different in mariadb
mysql-test/suite/perfschema/r/statement_digest_long_query.result:
md5 hashes of statement digests differ, because yacc token codes are different in mariadb
mysql-test/suite/rpl/r/rpl_mixed_drop_create_temp_table.result:
will be updated to match 5.6 when alfranio.correia@oracle.com-20110512172919-c1b5kmum4h52g0ni and anders.song@greatopensource.com-20110105052107-zoab0bsf5a6xxk2y are merged
mysql-test/suite/rpl/r/rpl_non_direct_mixed_mixing_engines.result:
will be updated to match 5.6 when anders.song@greatopensource.com-20110105052107-zoab0bsf5a6xxk2y is merged
The feature was backported from MySQL 5.6.
Some code was added to make commands as
SELECT * FROM ignored_db.t1;
CALL ignored_db.proc();
USE ignored_db;
to take that option into account.
per-file comments:
mysql-test/r/ignore_db_dirs_basic.result
test result added.
mysql-test/t/ignore_db_dirs_basic-master.opt
options for the test,
actually the set of --ignore-db-dir lines.
mysql-test/t/ignore_db_dirs_basic.test
test for the feature.
Same test from 5.6 was taken as a basis,
then tests for SELECT, CALL etc were added.
per-file comments:
sql/mysql_priv.h
MDEV-495 backport --ignore-db-dir.
interface for db_name_is_in_ignore_list() added.
sql/mysqld.cc
MDEV-495 backport --ignore-db-dir.
--ignore-db-dir handling.
sql/set_var.cc
MDEV-495 backport --ignore-db-dir.
the @@ignore_db_dirs variable added.
sql/sql_show.cc
MDEV-495 backport --ignore-db-dir.
check if the directory is ignored.
sql/sql_show.h
MDEV-495 backport --ignore-db-dir.
interface added for opt_ignored_db_dirs.
sql/table.cc
MDEV-495 backport --ignore-db-dir.
check if the directory is ignored.
When a client connects to a MySQL server, first a THD object is created.
If there are any idle server threads waiting, the THD object is then added
to a list and a server thread is woken up. This thread then retrieves the
THD object from the list and starts executing.
The problem was that this list of THD objects waiting for a server thread,
was not working in a FIFO fashion, but rather LIFO. This is unfair, as it means
that the last THD added (=last client connected) will be assigned a server
thread first.
Note however that for this to be a problem, several clients must be able
to connect and have THD objects constructed before any server threads
manages to be woken up. This is not a very likely scenario.
This patch fixes the problem by changing the THD list to work FIFO
rather than LIFO.
This is the 5.1/5.5 version of the patch.
BACKGROUND:
In certain situations DROP USER fails to remove all privileges
belonging to user being dropped from in-memory structures.
Current workaround is to do DROP USER twice in scenario below
OR doing FLUSH PRIVILEGES after doing DROP USER.
ANALYSIS:
In MySQL, When we grant some stored routines privileges to a
user they are stored in their respective hash.
When doing DROP USER all the stored routine privilege entries
associated with that user has to be deleted from its respective
hash.
The root cause for this bug is some entries from the hash
are not getting deleted.
The problem is that code that deletes entries from the hash tries
to do so while iterating over it, without taking enough measures
to address the fact that such deletion can reshuffle elements in
the hash. If the user/administrator creates the same user again
he is thrown an error 'Error 1396 ER_CANNOT_USER' from MySQL.
This prompts the user to either do FLUSH PRIVILEGES or do DROP USER
again. This behaviour is not desirable as it is a workaround and
does not solves the problem mentioned above.
FIX:
This bug is fixed by introducing a dynamic array to store the
pointersto all stored routine privilege objects that either have
to be deleted or updated. This is done in 3 steps.
Step 1: Fetching the element from the hash and checking whether
it is to be deleted or updated.
Step 2: Storing the pointer to that privilege object in dynamic array.
Step 3: Traversing the dynamic array to perform the appropriate action
either delete or update.
This is a much cleaner way to delete or update the privilege entries
associated with some user and solves the problem mentioned above.
Also the code has been refactored a bit by introducing an enum
instead of hard coded numbers used for respective dynamic arrays
and hashes in handle_grant_struct() function.
QUOTING IN REPLICATION
Problem: Misquoting or unquoted identifiers may lead to
incorrect statements to be logged to the binary log.
Fix: we use specialized functions to append quoted identifiers in
the statements generated by the server.
