recv_scan_log_recs(): Remember if redo log apply is needed,
even if starting up in innodb_read_only mode.
recv_recovery_from_checkpoint_start_func(): Refuse
innodb_read_only startup if redo log apply is needed.
Change default to zlib, this has effect only if user has
explicitly requested page compression and then user
naturally expects that pages are really compressed
if they can be compressed.
innodb.doublewrite: Similar to what was done to innodb.101_compatibility,
add an explicit $_ parameter to the Perl unpack function.
Also, fix some diagnostic messages in the Perl code.
innodb.innodb-wl5522-debug: Adjust for the changed error codes and
messages on fault injection.
MariaDB 10.0/MySQL 5.6 using innodb-page-size!=16K
The storage format of FSP_SPACE_FLAGS was accidentally broken
already in MariaDB 10.1.0. This fix is bringing the format in
line with other MySQL and MariaDB release series.
Please refer to the comments that were added to fsp0fsp.h
for details.
This is an INCOMPATIBLE CHANGE that affects users of
page_compression and non-default innodb_page_size. Upgrading
to this release will correct the flags in the data files.
If you want to downgrade to earlier MariaDB 10.1.x, please refer
to the test innodb.101_compatibility how to reset the
FSP_SPACE_FLAGS in the files.
NOTE: MariaDB 10.1.0 to 10.1.20 can misinterpret
uncompressed data files with innodb_page_size=4k or 64k as
compressed innodb_page_size=16k files, and then probably fail
when trying to access the pages. See the comments in the
function fsp_flags_convert_from_101() for detailed analysis.
Move PAGE_COMPRESSION to FSP_SPACE_FLAGS bit position 16.
In this way, compressed innodb_page_size=16k tablespaces will not
be mistaken for uncompressed ones by MariaDB 10.1.0 to 10.1.20.
Derive PAGE_COMPRESSION_LEVEL, ATOMIC_WRITES and DATA_DIR from the
dict_table_t::flags when the table is available, in
fil_space_for_table_exists_in_mem() or fil_open_single_table_tablespace().
During crash recovery, fil_load_single_table_tablespace() will use
innodb_compression_level for the PAGE_COMPRESSION_LEVEL.
FSP_FLAGS_MEM_MASK: A bitmap of the memory-only fil_space_t::flags
that are not to be written to FSP_SPACE_FLAGS. Currently, these will
include PAGE_COMPRESSION_LEVEL, ATOMIC_WRITES and DATA_DIR.
Introduce the macro FSP_FLAGS_PAGE_SSIZE(). We only support
one innodb_page_size for the whole instance.
When creating a dummy tablespace for the redo log, use
fil_space_t::flags=0. The flags are never written to the redo log files.
Remove many FSP_FLAGS_SET_ macros.
dict_tf_verify_flags(): Remove. This is basically only duplicating
the logic of dict_tf_to_fsp_flags(), used in a debug assertion.
fil_space_t::mark: Remove. This flag was not used for anything.
fil_space_for_table_exists_in_mem(): Remove the unnecessary parameter
mark_space, and add a parameter for table flags. Check that
fil_space_t::flags match the table flags, and adjust the (memory-only)
flags based on the table flags.
fil_node_open_file(): Remove some redundant or unreachable conditions,
do not use stderr for output, and avoid unnecessary server aborts.
fil_user_tablespace_restore_page(): Convert the flags, so that the
correct page_size will be used when restoring a page from the
doublewrite buffer.
fil_space_get_page_compressed(), fsp_flags_is_page_compressed(): Remove.
It suffices to have fil_space_is_page_compressed().
FSP_FLAGS_WIDTH_DATA_DIR, FSP_FLAGS_WIDTH_PAGE_COMPRESSION_LEVEL,
FSP_FLAGS_WIDTH_ATOMIC_WRITES: Remove, because these flags do not
exist in the FSP_SPACE_FLAGS but only in memory.
fsp_flags_try_adjust(): New function, to adjust the FSP_SPACE_FLAGS
in page 0. Called by fil_open_single_table_tablespace(),
fil_space_for_table_exists_in_mem(), innobase_start_or_create_for_mysql()
except if --innodb-read-only is active.
fsp_flags_is_valid(ulint): Reimplement from the scratch, with
accurate comments. Do not display any details of detected
inconsistencies, because the output could be confusing when
dealing with MariaDB 10.1.x data files.
fsp_flags_convert_from_101(ulint): Convert flags from buggy
MariaDB 10.1.x format, or return ULINT_UNDEFINED if the flags
cannot be in MariaDB 10.1.x format.
fsp_flags_match(): Check the flags when probing files.
Implemented based on fsp_flags_is_valid()
and fsp_flags_convert_from_101().
dict_check_tablespaces_and_store_max_id(): Do not access the
page after committing the mini-transaction.
IMPORT TABLESPACE fixes:
AbstractCallback::init(): Convert the flags.
FetchIndexRootPages::operator(): Check that the tablespace flags match the
table flags. Do not attempt to convert tablespace flags to table flags,
because the conversion would necessarily be lossy.
PageConverter::update_header(): Write back the correct flags.
This takes care of the flags in IMPORT TABLESPACE.
contains a bad and a good copy
Clean up the InnoDB doublewrite buffer code.
buf_dblwr_init_or_load_pages(): Do not add empty pages to the buffer.
buf_dblwr_process(): Do consider changes to pages that are all zero.
Do not abort when finding a corrupted copy of a page in the doublewrite
buffer, because there could be multiple copies in the doublewrite buffer,
and only one of them needs to be good.
This should be a non-functional change. I was unable to repeat
MDEV-11626 innodb.innodb-change-buffer-recovery fails for xtradb
and cannot determine the reason for the failure without having access
to the files.
The repeatability of MDEV-11626 should not be affected by these changes.
fil_space_t::recv_size: New member: recovered tablespace size in pages;
0 if no size change was read from the redo log,
or if the size change was implemented.
fil_space_set_recv_size(): New function for setting space->recv_size.
innodb_data_file_size_debug: A debug parameter for setting the system
tablespace size in recovery even when the redo log does not contain
any size changes. It is hard to write a small test case that would
cause the system tablespace to be extended at the critical moment.
recv_parse_log_rec(): Note those tablespaces whose size is being changed
by the redo log, by invoking fil_space_set_recv_size().
innobase_init(): Correct an error message, and do not require a larger
innodb_buffer_pool_size when starting up with a smaller innodb_page_size.
innobase_start_or_create_for_mysql(): Allow startup with any initial
size of the ibdata1 file if the autoextend attribute is set. Require
the minimum size of fixed-size system tablespaces to be 640 pages,
not 10 megabytes. Implement innodb_data_file_size_debug.
open_or_create_data_files(): Round the system tablespace size down
to pages, not to full megabytes, (Our test truncates the system
tablespace to more than 800 pages with innodb_page_size=4k.
InnoDB should not imagine that it was truncated to 768 pages
and then overwrite good pages in the tablespace.)
fil_flush_low(): Refactored from fil_flush().
fil_space_extend_must_retry(): Refactored from
fil_extend_space_to_desired_size().
fil_mutex_enter_and_prepare_for_io(): Extend the tablespace if
fil_space_set_recv_size() was called.
The test case has been successfully run with all the
innodb_page_size values 4k, 8k, 16k, 32k, 64k.
be consistent and don't include the table name into the error message,
no other CREATE TABLE error does it.
(the crash happened, because thd->lex->query_tables was NULL)
trx_state_eq(): Add the parameter bool relaxed=false, to
allow trx->state==TRX_STATE_NOT_STARTED where a different
state is expected, if an error has been reported.
trx_release_savepoint_for_mysql(): Pass relaxed=true to
trx_state_eq(). That is, allow the transaction to be idle
when ROLLBACK TO SAVEPOINT is attempted after an error
has been reported to the client.
When checking is any of the renamed columns part of the
columns for new indexes we accessed NULL pointer if checked
column used on index was added on same statement. Additionally,
we tried to check too many indexes, added_index_count
is enough here.
FROM I_S
Issue:
------
There is a difference in the field type created when the
following DDLs are used:
1) CREATE TABLE t0 AS SELECT NULL;
2) CREATE TABLE t0 AS SELECT GREATEST(NULL,NULL);
The first statement creates field of type Field_string and
the second one creates a field of type Field_null.
This creates a problem when the query mentioned in this bug
is used. Since the null_ptr is calculated differently for
Field_null.
Solution:
---------
When there is a function returning null in the select list
as mentioned above, the field should be of type
Field_string.
This was fixed in 5.6+ as part of Bug#14021323. This is a
backport to mysql-5.5.
An incorrect comment in innodb_bug54044.test has been
corrected in all versions.
commit ef92aaf9ec
Author: Jan Lindström <jan.lindstrom@mariadb.com>
Date: Wed Jun 22 22:37:28 2016 +0300
MDEV-10083: Orphan ibd file when playing with foreign keys
Analysis: row_drop_table_for_mysql did not allow dropping
referenced table even in case when actual creating of the
referenced table was not successfull if foreign_key_checks=1.
Fix: Allow dropping referenced table even if foreign_key_checks=1
if actual table create returned error.
Analysis: row_drop_table_for_mysql did not allow dropping
referenced table even in case when actual creating of the
referenced table was not successfull if foreign_key_checks=1.
Fix: Allow dropping referenced table even if foreign_key_checks=1
if actual table create returned error.
Use direct persistent index corruption set on InnoDB dictionary
for this test. Do not allow creating new indexes if one of the
existing indexes is already marked as corrupted.
including the test case:
https://github.com/mysql/mysql-server/commit/520aedfe
INNODB: "DATA DIRECTORY" OPTION OF CREATE TABLE FAILS WITH PWRITE() OS
ERROR 22
Fix for version mysql-5.6
PROBLEM
========
For version mysql-5.6.27 onwards InnoDB fails to create a table
with explicit 'data directory' option when Innodb_flush_method
is set to O_DIRECT.While creating link file we get a a pwrite
error 22 due to the alignment restrictions imposed by O_DIRECT
flag which is being set for the link file created.
FIX
===
Fixed the above issue by making use of file IO functions while
creating the link file that wouldn't let the O_DIRECT flag
restrictions arise.
Reviewed-by: Kevin Lewis <kevin.lewis@oracle.com>
Reviewed-by: Shaohua Wang <shaohua.wang@oracle.com>
RB: 11387
An additional warning saying "tc-log cannot be enabled"
is emitted when InnoDB is installed at runtime on mysqld
built with wsrep-patch (-DWITH_WSREP=ON).
This happens because, installing InnoDB increments the
total number of 2pc-capable engines and with wsrep-patch
already enabled - the total count goes >1. Even though,
this condition is sufficient to enable tc-logging, it is
not permitted at runtime, and thus the warning.
Updated the testcase to avoid the warning.
take MDL_SHARED_WRITE instead of MDL_SHARED_NO_READ_WRITE
for OPTIMIZE TABLE. For engines that need a stronger
lock (like MyISAM), reopen the table with
MDL_SHARED_NO_READ_WRITE.
Problem was that in-place online alter table was used on a table
that had mismatch between MySQL frm file and InnoDB data dictionary.
Fixed so that traditional "Copy" method is used if the MySQL frm
and InnoDB data dictionary is not consistent.
In row_search_for_mysql function on XtraDB there was a old logic
where null bytes were inited. This caused server to think that
key value is null and continue on incorrect path.