The issue appears when number of heartbeat events non-zero before start of test
block. But really we need to check that no new events has received during test block.
So I did following:
1. Replace absolute values by diff of values
2. Increase heartbeat period from 1.5 to 5 sec
Let
- T be a transactional table and N non-transactional table.
- B be begin, C commit and R rollback.
- N be a statement that accesses and changes only N-tables.
- T be a statement that accesses and changes only T-tables.
In RBR, changes to N-tables that happen early in a transaction are not immediately flushed
upon committing a statement. This behavior may, however, break consistency in the presence
of concurrency since changes done to N-tables become immediately visible to other
connections. To fix this problem, we do the following:
. B N N T C would log - B N C B N C B T C.
. B N N T R would log - B N C B N C B T R.
Note that we are not preserving history from the master as we are introducing a commit that
never happened. However, this seems to be more acceptable than the possibility of breaking
consistency in the presence of concurrency.
Let
- T be a transactional table and N non-transactional table.
- B be begin, C commit and R rollback.
- M be a mixed statement, i.e. a statement that updates both T and N.
- M* be a mixed statement that fails while updating either T or N.
This patch restore the behavior presented in 5.1.37 for rows either produced in
the RBR or MIXED modes, when a M* statement that happened early in a transaction
had their changes written to the binary log outside the boundaries of the
transaction and wrapped in a BEGIN/ROLLBACK. This was done to keep the slave
consistent with with the master as the rollback would keep the changes on N and
undo them on T. In particular, we do what follows:
. B M* T C would log - B M* R B T C.
Note that, we are not preserving history from the master as we are introducing a
rollback that never happened. However, this seems to be more acceptable than
making the slave diverge. We do not fix the following case:
. B T M* C would log B T M* C.
The slave will diverge as the changes on T tables that originated from the M
statement are rolled back on the master but not on the slave. Unfortunately, we
cannot simply rollback the transaction as this would undo any uncommitted
changes on T tables.
SBR is not considered in this patch because a failing statement is written to
the binary along with the error code and a slave executes and then rolls back
the statement when it has an associated error code, thus undoing the effects
on T. In RBR and MBR, a full-fledged fix will be pushed after the WL 2687.
CHANGE MASTER TO command required the value for RELAY_LOG_FILE to
be an absolute path, which was different from the requirement of
MASTER_LOG_FILE.
This patch fixed the problem by changing the value for RELAY_LOG_FILE
to be the basename of the log file as that for MASTER_LOG_FILE.
The problem is that there is only one autoinc value associated with
the query when binlogging. If more than one autoinc values are used
in the query, the autoinc values after the first one can be inserted
wrongly on slave. So these autoinc values can become inconsistent on
master and slave.
The problem is resolved by marking all the statements that invoke
a trigger or call a function that updated autoinc fields as unsafe,
and will switch to row-format in Mixed mode. Actually, the statement
is safe if just one autoinc value is used in sub-statement, but it's
impossible to check how many autoinc values are used in sub-statement.)
mysql-test/suite/rpl/r/rpl_auto_increment_update_failure.result:
Test result for bug#45677
mysql-test/suite/rpl/t/rpl_auto_increment_update_failure.test:
Added test to verify the following two properties:
P1) insert/update in an autoinc column causes statement to
be logged in row format if binlog_format=mixed
P2) if binlog_format=mixed, and a trigger or function contains
two or more inserts/updates in a table that has an autoinc
column, then the slave should not go out of sync, even if
there are concurrent transactions.
sql/sql_base.cc:
Added function 'has_write_table_with_auto_increment' to check
if one (or more) write tables have auto_increment columns.
Removed function 'has_two_write_locked_tables_with_auto_increment',
because the function is included in function
'has_write_table_with_auto_increment'.
rpl_slave_skip fails randomly on PB2. This patch fixes the failure by
setting explicit wait for SQL thread to stop, instead of the
wait_for_slave_to_stop mysqltest command, after a start until command
is executed.
We cann connect() in a non-blocking mode to be able to specify a
non-standard timeout.
The problem was that we did not fetch the status from the
non-blocking connect(). We assumed that poll() would not return
a POLLIN flag if the connect failed. But on some platforms this
is not true.
After a successful poll() we do now retrieve the status value
from connect() with getsockopt(...SO_ERROR...). Now we do know
if (and how) the connect failed.
The test case for my investigation was rpl.rlp_ssl1 on an
Ubuntu 9.04 x86_64 machine. Both, IPV4 and IPV6 were active.
'localhost' resolved first for IPV6 and then for IPV4. The
connection over IPV6 was blocked. rpl.rlp_ssl1 timed out
as it did not notice the failed connect(). The first read()
failed, which was interpreted as a master crash and the
connection was tried to reestablish with the same result
until the retry limit was reached.
With the fix, the connect() problem is immediately recognized,
and the connect() is retried on the second resolution for
'localhost', which is successful.
libmysqld/libmysqld.c:
Bug#37267 - connect() EINPROGRESS failures mishandled in client library
Changed a DBUG print string to distinguish the two mysql_real_connect()
implementations in DBUG traces.
mysql-test/include/wait_for_slave_param.inc:
Bug#37267 - connect() EINPROGRESS failures mishandled in client library
Made timeout value available in error message.
mysql-test/suite/rpl/r/rpl_get_master_version_and_clock.result:
Bug#37267 - connect() EINPROGRESS failures mishandled in client library
Fixed test result. Connect error is now detected as CR_CONN_HOST_ERROR
(2003) instead of CR_SERVER_LOST (2013).
sql-common/client.c:
Bug#37267 - connect() EINPROGRESS failures mishandled in client library
Added retrieval of the error code from the non-blocking connect().
Added DBUG.
Added comment.
DECIMAL and TIMESTAMP used to have NUM_FLAG, but NEWDECIMAL was forgotten.
It's correct that TIMESTAMP does not have the flag nowadays (manual will be updated, connectors
developers will be notified).
client/mysqldump.c:
IS_NUM_FIELD(f) removed and replaced by its definition (f>flags & NUM_FLAG).
include/mysql.h:
- IS_NUM_FIELD() is removed because name is too close to IS_NUM() and it is not used a lot
- INTERNAL_NUM_FIELD() is removed:
* it forgets to test NEWDECIMAL (when IS_NUM() was updated for NEWDECIMAL we forgot
to update INTERNAL_NUM_FIELD()), that's why client didn't mark NEWDECIMAL with NUM_FLAG (a bug).
* it has an obsolete test for length of the TIMESTAMP field: test became accidentally wrong when length
of TIMESTAMP was changed to always be 19 (when the format was changed from YYYYMMDDhhmmss to
YYYY-MM-DD hh:mm:ss), never 8 or 14 anymore. That obsolete test caused TIMESTAMP to lose NUM_FLAG,
which was an accidental but good change (see below).
* IS_NUM() should be used instead
- IS_NUM(f) is changed: TIMESTAMP used to be parsable as a number without quotes (when it was formatted as
"YYYYMMDDhhmmss"); but it is not anymore (now that it is "YYYY-MM-DD hh:mm:ss"), so it should not have NUM_FLAG
(mysqldump needs to quote TIMESTAMP values), so IS_NUM() should return false for it.
libmysqld/lib_sql.cc:
use IS_NUM() instead of INTERNAL_NUM_FIELD()
mysql-test/r/bigint.result:
result change: NEWDECIMAL fields now have NUM_FLAG (32768)
mysql-test/r/metadata.result:
result change: NEWDECIMAL fields now have NUM_FLAG (32768)
mysql-test/r/mysqldump.result:
DECIMAL columns are not quoted anymore by mysqldump. Which is ok, the parser does not need '' for them
mysql-test/r/ps_2myisam.result:
result change: NEWDECIMAL fields now have NUM_FLAG (32768)
mysql-test/r/ps_3innodb.result:
result change: NEWDECIMAL fields now have NUM_FLAG (32768)
mysql-test/r/ps_4heap.result:
result change: NEWDECIMAL fields now have NUM_FLAG (32768)
mysql-test/r/ps_5merge.result:
result change: NEWDECIMAL fields now have NUM_FLAG (32768)
mysql-test/suite/ndb/r/ps_7ndb.result:
result change: NEWDECIMAL fields now have NUM_FLAG (32768)
mysql-test/t/metadata.test:
test for BUG#42980
sql-common/client.c:
use IS_NUM() instead of INTERNAL_NUM_FIELD()
The 'BEGIN/COMMIT/ROLLBACK' log event could be filtered out if the
database is not selected by --database option of mysqlbinlog command.
This can result in problem if there are some statements in the
transaction are not filtered out.
To fix the problem, mysqlbinlog will output 'BEGIN/ROLLBACK/COMMIT'
in regardless of the database filtering rules.
client/mysqlbinlog.cc:
Skip the database check for BEGIN/COMMIT/ROLLBACK log events.
mysql-test/r/mysqlbinlog.result:
Test result for bug#46998
mysql-test/suite/binlog/t/binlog_row_mysqlbinlog_db_filter.test:
The test case is updated duo to the patch of bug#46998
mysql-test/t/mysqlbinlog.test:
Added test to verify if the 'BEGIN', 'COMMIT' and 'ROLLBACK' are output
in regardless of database filtering
NOTE: Backporting the patch to next-mr.
The fix proposed in BUG#35542 and BUG#31665 introduces a performance issue
when fsyncing the master.info, relay.info and relay-log.bin* after #th events.
Although such solution has been proposed to reduce the probability of corrupted
files due to a slave-crash, the performance penalty introduced by it has
made the approach impractical for highly intensive workloads.
In a nutshell, the option --syn-relay-log proposed in BUG#35542 and BUG#31665
simultaneously fsyncs master.info, relay-log.info and relay-log.bin* and
this is the main source of performance issues.
This patch introduces new options that give more control to the user on
what should be fsynced and how often:
1) (--sync-master-info, integer) which syncs the master.info after #th event;
2) (--sync-relay-log, integer) which syncs the relay-log.bin* after #th
events.
3) (--sync-relay-log-info, integer) which syncs the relay.info after #th
transactions.
To provide both performance and increased reliability, we recommend the following
setup:
1) --sync-master-info = 0 eventually the operating system will fsync it;
2) --sync-relay-log = 0 eventually the operating system will fsync it;
3) --sync-relay-log-info = 1 fsyncs it after every transaction;
Notice, that the previous setup does not reduce the probability of
corrupted master.info and relay-log.bin*. To overcome the issue, this patch also
introduces a recovery mechanism that right after restart throws away relay-log.bin*
retrieved from a master and updates the master.info based on the relay.info:
4) (--relay-log-recovery, boolean) which enables a recovery mechanism that
throws away relay-log.bin* after a crash.
However, it can only recover the incorrect binlog file and position in master.info,
if other informations (host, port password, etc) are corrupted or incorrect,
then this recovery mechanism will fail to work.
vs not null
NOTE: Backporting the patch to next-mr.
The replication was generating corrupted data, warning messages on Valgrind
and aborting on debug mode while replicating a "null" to "not null" field.
Specifically the unpack_row routine, was considering the slave's table
definition and trying to retrieve a field value, where there was nothing to be
retrieved, ignoring the fact that the value was defined as "null" by the master.
To fix the problem, we proceed as follows:
1 - If it is not STRICT sql_mode, implicit default values are used, regardless
if it is multi-row or single-row statement.
2 - However, if it is STRICT mode, then a we do what follows:
2.1 If it is a transactional engine, we do a rollback on the first NULL that is
to be set into a NOT NULL column and return an error.
2.2 If it is a non-transactional engine and it is the first row to be inserted
with multi-row, we also return the error. Otherwise, we proceed with the
execution, use implicit default values and print out warning messages.
Unfortunately, the current patch cannot mimic the behavior showed by the master
for updates on multi-tables and multi-row inserts. This happens because such
statements are unfolded in different row events. For instance, considering the
following updates and strict mode:
(master)
create table t1 (a int);
create table t2 (a int not null);
insert into t1 values (1);
insert into t2 values (2);
update t1, t2 SET t1.a=10, t2.a=NULL;
t1 would have (10) and t2 would have (0) as this would be handled as a
multi-row update. On the other hand, if we had the following updates:
(master)
create table t1 (a int);
create table t2 (a int);
(slave)
create table t1 (a int);
create table t2 (a int not null);
(master)
insert into t1 values (1);
insert into t2 values (2);
update t1, t2 SET t1.a=10, t2.a=NULL;
On the master t1 would have (10) and t2 would have (NULL). On
the slave, t1 would have (10) but the update on t1 would fail.
beyond unsigned long.
BUG#44779: binlog.binlog_max_extension may be causing failure on
next test in PB
NOTE1: this is the backport to next-mr.
NOTE2: already includes patch for BUG#44779.
Binlog file extensions would turn into negative numbers once the
variable used to hold the value reached maximum for signed
long. Consequently, incrementing value to the next (negative) number
would lead to .000000 extension, causing the server to fail.
This patch addresses this issue by not allowing negative extensions
and by returning an error on find_uniq_filename, when the limit is
reached. Additionally, warnings are printed to the error log when the
limit is approaching. FLUSH LOGS will also report warnings to the
user, if the extension number has reached the limit. The limit has been
set to 0x7FFFFFFF as the maximum.
mysql-test/suite/binlog/t/binlog_max_extension.test:
Test case added that checks the maximum available number for
binlog extensions.
sql/log.cc:
Changes to find_uniq_filename and test_if_number.
sql/log.h:
Added macros with values for MAX_LOG_UNIQUE_FN_EXT and
LOG_WARN_UNIQUE_FN_EXT_LEFT, as suggested in review.
NOTE: this is the backport to next-mr.
This patch addresses the bug reported by checking wether
host argument is an empty string or not. If empty, an error is
reported to the client, otherwise continue normally.
This commit is based on the originally proposed patch and adds
a test case as requested during review as well as refines comments,
and makes test case result file less verbose (compared to previous patch).
NOTE: this is the backport to next-mr.
When using replication, the slave will not log any slow query logs queries
replicated from the master, even if the option "--log-slow-slave-statements"
is set and these take more than "log_query_time" to execute.
In order to log slow queries in replicated thread one needs to set the
--log-slow-slave-statements, so that the SQL thread is initialized with the
correct switch. Although setting this flag correctly configures the slave
thread option to log slow queries, there is an issue with the condition that
is used to check whether to log the slow query or not. When replaying binlog
events the statement contains the SET TIMESTAMP clause which will force the
slow logging condition check to fail. Consequently, the slow query logging will
not take place.
This patch addresses this issue by removing the second condition from the
log_slow_statements as it prevents slow queries to be binlogged and seems
to be deprecated.
NOTE: Backporting the patch to next-mr.
The reason of the bug was incompatibile with the master side behaviour.
INSERT query on the master is allowed to insert into a table without specifying
values of DEFAULT-less fields if sql_mode is not strict.
Fixed with checking sql_mode by the sql thread to decide how to react.
Non-strict sql_mode should allow Write_rows event to complete.
todo: warnings can be shown via show slave status, still this is a
separate rather general issue how to show warnings for the slave threads.
files
NOTE: this is the backport to next-mr.
SHOW BINLOG EVENTS does not work with relay log files. If issuing
"SHOW BINLOG EVENTS IN 'relay-log.000001'" in a non-empty relay
log file (relay-log.000001), mysql reports empty set.
This patch addresses this issue by extending the SHOW command
with RELAYLOG. Events in relay log files can now be inspected by
issuing SHOW RELAYLOG EVENTS [IN 'log_name'] [FROM pos] [LIMIT
[offset,] row_count].
mysql-test/extra/rpl_tests/rpl_show_relaylog_events.inc:
Shared part of the test case.
mysql-test/include/show_binlog_events.inc:
Added options $binary_log_file, $binary_log_limit_row,
$binary_log_limit_offset so that show_binlog_events can take
same parameters as SHOW BINLOG EVENTS does.
mysql-test/include/show_relaylog_events.inc:
Clone of show_binlog_events for relaylog events.
mysql-test/suite/rpl/t/rpl_row_show_relaylog_events.test:
Test case for row based replication.
mysql-test/suite/rpl/t/rpl_stm_mix_show_relaylog_events.test:
Test case for statement and mixed mode replication.
sql/lex.h:
Added RELAYLOG symbol.
sql/mysqld.cc:
Added "show_relaylog_events" to status_vars.
sql/sp_head.cc:
Set SQLCOM_SHOW_RELAYLOG_EVENTS to return flags=
sp_head::MULTI_RESULTS; in sp_get_flags_for_command as
SQLCOM_SHOW_BINLOG_EVENTS does.
sql/sql_lex.h:
Added sql_command SQLCOM_SHOW_RELAYLOG_EVENTS to lex enum_sql_command.
sql/sql_parse.cc:
Added handling of SQLCOM_SHOW_RELAYLOG_EVENTS.
sql/sql_repl.cc:
mysql_show_binlog_events set to choose the log file to use based on
the command issued (SHOW BINLOG|RELAYLOG EVENTS).
sql/sql_yacc.yy:
Added RELAYLOG to the grammar.
"load data" statements were written to the binlog as a mix of the original statement
and bits recreated from parse-info. This relied on implementation details and broke
with IGNORE_SPACES and versioned comments.
We now completely resynthesize the query for LOAD DATA for binlog (which among other
things normalizes them somewhat with regard to case, spaces, etc.).
We have already parsed the query properly, so we make use of that rather
than mix-and-match string literals and parsed items.
This should make us safe with regard to versioned comments, even those
spanning multiple tokens. Also no longer affected by IGNORE_SPACES.
mysql-test/r/mysqlbinlog.result:
LOAD DATA INFILE normalized
mysql-test/suite/binlog/r/binlog_killed_simulate.result:
LOAD DATA INFILE normalized
mysql-test/suite/binlog/r/binlog_row_mix_innodb_myisam.result:
LOAD DATA INFILE normalized
mysql-test/suite/binlog/r/binlog_stm_blackhole.result:
LOAD DATA INFILE normalized
mysql-test/suite/binlog/r/binlog_stm_mix_innodb_myisam.result:
LOAD DATA INFILE normalized
mysql-test/suite/rpl/r/rpl_innodb_mixed_dml.result:
LOAD DATA INFILE normalized
mysql-test/suite/rpl/r/rpl_loaddata.result:
LOAD DATA INFILE normalized
mysql-test/suite/rpl/r/rpl_loaddata_fatal.result:
LOAD DATA INFILE normalized; offsets adjusted to reflect that
mysql-test/suite/rpl/r/rpl_loaddata_map.result:
LOAD DATA INFILE normalized
mysql-test/suite/rpl/r/rpl_loaddatalocal.result:
test for #43746 - trying to break LOAD DATA part of parser
mysql-test/suite/rpl/r/rpl_stm_log.result:
LOAD DATA INFILE normalized
mysql-test/suite/rpl/t/rpl_loaddatalocal.test:
try to break the LOAD DATA part of the parser (test for #43746)
mysql-test/t/mysqlbinlog.test:
LOAD DATA INFILE normalized; adjust offsets to reflect that
sql/log_event.cc:
clean up Load_log_event::print_query and friends so they don't print
excess spaces. add support for printing charset names to print_query.
sql/log_event.h:
We already have three places where we synthesize LOAD DATA queries.
Better use one of those!
sql/sql_lex.h:
When binlogging LOAD DATA statements, we make up the statement to
be logged (from the parse-info, rather than substrings of the
original query) now. Consequently, we no longer need (string-)
pointers into the original query.
sql/sql_load.cc:
Completely rewrote write_execute_load_query_log_event() to synthesize the
LOAD DATA statement wholesale, rather than piece it together from
synthesized bits and literal excerpts from the original query. This
will not only give us a nice, normalized statement (all uppercase,
no excess spaces, etc.), it will also handle comments, including
versioned comments right, which is certainly more than we can say
about the previous incarnation.
sql/sql_yacc.yy:
We're no longer assembling LOAD DATA statements from bodyparts of the
original query, so some bookkeeping in the parser can go.
All statements executed by mysql_upgrade are binlogged and then are replicated to slave.
This will result in some errors. The report of this bug has demonstrated some examples.
Master and slave should be upgraded separately. All statements executed by
mysql_upgrade will not be binlogged.
--write-binlog and --skip-write-binlog options are added into mysql_upgrade.
These options control whether sql statements are binlogged or not.
In RBR, 'DROP TEMPORARY TABLE IF EXISTS...' statement is binlogged when the table
does not exist.
In fact, 'DROP TEMPORARY TABLE ...' statement should never be binlogged in RBR
no matter if the table exists or not.
This patch addresses this by checking whether we are dropping a
temporary table or not, when building the custom drop statement.
failure to cleanup of table
The test case was not dropping a table before exiting (ie, it was
not cleaning itself after execution). In this case, the warning
message stating that the test did not do a proper cleanup was
deterministic (which can be annoying).
I have found other tests cases on which mtr sporadically reports
that they have not cleaned up after execution:
- rpl_ndb_circular
- rpl_failed_optimize
In this case, the master was dropping a table but there was no
synchronization between the slave and the master.
This patch addresses the rpl_ndb_circular_simplex case by adding
the missing DROP table. The other cases are fixed by deploying
the missing sync_slave_with_master instruction.
