c3cf7f47f0 reverted the patch
for BUG#24487120. After merging the reverting patch from MySQL
to MariaDB the problems described in MDEV-11079 and MDEV-11631 disappeared.
Adding test cases only.
MY_THREAD_INIT IN BACKGROUND THREAD
Description:
===========
Add my_thread_init() and my_thread_exit() for background threads which
initializes and frees the st_my_thread_var structure.
Reviewed-by: Jimmy Yang<jimmy.yang@oracle.com>
RB: 15003
The fix for bug mdev-5104 did not take into account that
for any call of setup_order the size of ref_array must
be big enough. This patch fixes this problem.
When the test is run as a part of the suite with valgrind,
only allow it to be executed if --big-test is set.
If the test is run by specifying its name explicitly, it
will still be executed, even with valgrind without big-test,
MTR has special logic for that
The guilty part of the test checks for performance degradation on
a query with numerous joins on an empty table. The test expects
the query to take less than 1 second, and fails if it is not so
(which can happen on very slow builders).
The solution is to add more JOINs to the query. On a fixed server,
it should not have any noticeable impact on the query execution,
while on the unfixed version the query would take several times
longer (e.g. 6.5 sec vs 1.5 sec). Thus, we can increase the margin
for the error, and make the test fail when the query takes longer
than 5 seconds.
Backport the fix to 5.5, because it fails there too
The patch fixes two test failures:
- on slow builders, sometimes a connection attempt which should
fail due to the exceeded number of thread_pool_max_threads
actually succeeds;
- on even slow builders, MTR sometimes cannot establish the
initial connection, and check-testcase fails prior to the
test start
The problem with check-testcase was caused by connect-timeout=2
which was set for all clients in the test config file. On slow
builders it might be not enough.
There is no way to override it for the pre-test check, so it needed
to be substantially increased or removed.
The other problem was caused by a race condition between sleeps
that the test performs in existing connections and the connect
timeout for the connection attempt which was expected to fail.
If sleeps finished before the connect-timeout was exceeded, it
would allow the connection to succeed.
To solve each problem without making the other one worse,
connect-timeout should be configured dynamically during the test.
Due to the nature of the test (all connections must be busy
at the moment when we need to change the timeout, and cannot execute
SET GLOBAL ...), it needs to be done independently from the server.
The solution:
- recognize 'connect_timeout' as a connection option in mysqltest's
"connect" command;
- remove connect-timeout from the test configuration file;
- use the new connect_timeout option for those connections which
are expected to fail;
- re-arrange the test flow to allow running a huge SLEEP
without affecting the test execution time (because it would be
interrupted after the main test flow is finished).
The test is still subject to false negatives, e.g. if the connection
fails due to timeout rather than due to the exceeded number of
allowed threads, or if the connection on extra port succeeds due
to a race condition and not because the special logic for the extra
port. But those false negatives have always been possible there
on slow builders, they should not be critical because faster builders
should catch such failures if they appear.
Conflicts:
client/mysqltest.cc
mysql-test/r/pool_of_threads.result
mysql-test/t/pool_of_threads.test
In file sql/filesort.cc,when merge_buffers() is called then
- queue_remove(&queue,0) is called
- For the function queue_remove there is assertion states that the element to be removed should have index >=1
- this is causing the assertion to fail.
Fixed by removing the top element.
IS STARTING: CONFUSING ERROR
DESCRIPTION
===========
When mysql server processes transactions but has not yet
committed and shuts down abnormally (due to crash, external
killing etc.), a recovery is due from Storage engine side
which takes place the next time mysql server (either
through mysqld or mysqld_safe) is run.
While the 1st server is in mid of recovery, if another
instance of mysqld_safe is made to run, it may result into
2nd instance killing the 1st one after a moment.
ANALYSIS
========
In the "while true" loop, we've a check (which is done
after the server stops) for the existence of pid file to
enquire if it was a normal shutdown or not. If the file is
absent, it means that the graceful exit of server had
removed this file.
However if the file is present, the scripts makes a plain
assumption that this file is leftover of the "current"
server. It misses to consider that it could be a valid pid
file belonging to another running mysql server.
We need to add more checks in the latter case. The script
should extract the PID from this existing file and check if
its running or not. If yes, it means an older instance of
mysql server is running and hence the script should abort.
FIX
===
Checking the status of process (alive or not) by adding a
@CHECK_PID@ in such a case. Aborting if its alive. Detailed
logic is as follows:
- The mysqld_safe script would quit at start only as soon
as it finds that there is an active PID i.e. a mysql server
is already running.
- The PID file creation takes place after InnoDb recovery,
which means in rare case (when PID file isn't created yet)
it may happen that more than 1 server can come up but even
in that case others will have to wait till the 1st server
has released the acquired InnoDb lock. In this case all
these servers will either TIMEOUT waiting for InnoDb lock
or after this they would find that the 1st server is
already running (by reading $pid_file) and would abort.
- Our core fix is that we now check the status of mysql
server process (alive or not) after the server stops
running within the loop of "run -> shutdown/kill/abort ->
run ... ", so that only the script who owns the mysql
server would be able to bring it down if required.
NOTE
====
Removed the deletion of pid file and socket file from entry
of the loop, as it may result in 2nd instance deleting
these files created by 1st instance in RACE condition.
Compensated this by deleting these files at end of the loop
Reverted the changes made in patch to Bug#16776528. So
after this patch is pushed, the concept of mysqld_safe.pid
would go altogether. This was required as the script was
deleting other instance's mysqld_safe.pid allowing multiple
mysqld_safe instances to run in parallel. This patch would
fix Bug#16776528 as well as the resources would be guarded
anyway by InnoDb lock + our planned 5.7 patch.
The patch b96c196f1c added a new call for
safe_charset_converter() without a corresponding fix_fields().
In case of a sub-query the created Item remained in non-fixed state.
The problem did not show up with literal derived expressions, only
subselects were affected. This patch adds a corresponding fix_fields()
to the previously added safe_charset_converter().
The bug occurred when a subquery
- has a reference to outside, to grand-parent query or further up
- is converted to a semi-join (i.e. merged into its parent).
Then the reference to outside had form Item_ref(Item_field(...)).
- Conversion to semi-join would call item->fix_after_pullout() for the
outside reference.
- Item_ref::fix_after_pullout would call Item_field->fix_after_pullout
- The Item_field would construct a new Name_resolution_context object
This process ignored the fact that the Item_field does not belong to
any of the subselects being flattened.
The result was crash in the next call to Item_field::fix_fields(), where
we would try to use an invalid Name_resolution_context object.
Fixed by not creating Name_resolution_context object if the Item_field's
context does not belong to the subselect(s) that were flattened.
This change is a backport from 10.0 to 5.5 for:
1. The full patch for:
MDEV-4841 Wrong character set of ADDTIME() and DATE_ADD()
9adb6e991e
2. A small fragment of:
MDEV-5298 Illegal mix of collations on timestamp
03f6778d61
which overrides Item_temporal_hybrid_func::cmp_type(),
and adds a new line into cache_temporal_4265.result.
because thd->update_server_status() is used to measure the query time
for the slow log (not only to set protocol level flags),
it needs to be called also when the server isn't going to send
anything to the client.
MySQL has a bug failing to handle
MYSQL_THDVAR_STR(... PLUGIN_VAR_NOSYSVAR |
PLUGIN_VAR_NOCMDOPT | PLUGIN_VAR_MEMALLOC)
so fall back to just PLUGIN_VAR_READONLY | PLUGIN_VAR_MEMALLOC
whem MySQL started.
Issue:
------
While using the LOAD statement to insert data into an
updateable view, the check to verify whether a column
is actually updatable is missing.
Solution for 5.5 and 5.6:
-------------------------
For a view whose column-list in specified in the LOAD
command, this check is not performed. This fix adds the
check.
This is a partial backport of Bug#21097485.
Solution for 5.7 and trunk:
---------------------------
For a view whose column-list is specified in the LOAD
command, this check is already performed. This fix adds the
same check when no column-list is specified.
Different fix. Don't allow Item_func_sp to be evaluated unless
all tables are prelocked.
Extend the test case to make sure Item_func_sp::val_str is called
(the table must have at least one row for that).
This reverts commit 035a5ac62a.
Two minor problems and one regression:
1. caching the value in str_result. Other Item methods may use it,
destroying the cache. See, for example, Item::save_in_field, where
str_result is moved to use a local buffer (this failed main.grant)
2. Item_func_conv_charset::safe is now set too late, it's initialized
only in val_str() but checked before that, this failed many tests
in optimized builds.
to fix 1 - use tmp_result instead of str_result, to fix 2, use
the else branch in the Item_func_conv_charset constructor to set
safe purely from charset properties.
But this introduces a regression, constant strings can no longer be
converted, say, from utf8 to latin1 (because 'safe' will be false).
This fails few tests too. There is no way to fix it without reverting
the commit and converting constants, as before, in the constructor.