This patch prevents system threads and system table accesses from
using user-specified values for "lock_wait_timeout". Instead all
such accesses are done using the default value (1 year).
This prevents background tasks (such as replication, events,
accessing stored function definitions, logging, reading time-zone
information, etc.) from failing in cases where the global value
of "lock_wait_timeout" is set very low.
The patch also simplifies the open tables API. Rather than adding
another convenience function for opening and locking system tables,
this patch removes most of the existing convenience functions for
open_and_lock_tables_derived(). Before, open_and_lock_tables() was
a convenience function that enforced derived tables handling, while
open_and_lock_tables_derived() was the main function where derived
tables handling was optional. Now, this convencience function is
gone and the main function is renamed to open_and_lock_tables().
No test case added as it would have required the use of --sleep to
check that system threads and system tables have a different timeout
value from the user-specified "lock_wait_timeout" system variable.
As part of BUG@39934 fix, the public:
- THD::current_stmt_binlog_row_based
variable had been removed and replaced by a private variable:
- THD::current_stmt_binlog_format.
THD was refactored and some modifiers and accessors were
implemented for the new variable.
However, due to a bad merge, the
THD::current_stmt_binlog_row_based variable is back as a public
member of THD. This in itself is already potentially
harmful. What's even worse is that while merging some more
patches and resolving conflicts, the variable started being used
again, which is obviously wrong.
To fix this we:
1. remove the extraneous variable from sql_class.h
2. revert a bad merge for BUG#49132
3. merge BUG#49132 properly again (actually, making use of the
cset used to merge the original patch to mysql-pe).
In RBR, DDL statement will change binlog format to non row-based
format before it is binlogged, but the binlog format was not be
restored, and then manipulating a temporary table can not reset binlog
format to row-based format rightly. So that the manipulated statement
is binlogged with statement-based format.
To fix the problem, restore the state of binlog format after the DDL
statement is binlogged.
----------------------------------------------------------
revno: 2617.69.20
committer: Konstantin Osipov <kostja@sun.com>
branch nick: 5.4-4284-1-assert
timestamp: Thu 2009-08-13 18:29:55 +0400
message:
WL#4284 "Transactional DDL locking"
A review fix.
Since WL#4284 implementation separated MDL_request and MDL_ticket,
MDL_request becamse a utility object necessary only to get a ticket.
Store it by-value in TABLE_LIST with the intent to merge
MDL_request::key with table_list->table_name and table_list->db
in future.
Change the MDL subsystem to not require MDL_requests to
stay around till close_thread_tables().
Remove the list of requests from the MDL context.
Requests for shared metadata locks acquired in open_tables()
are only used as a list in recover_from_failed_open_table_attempt(),
which calls mdl_context.wait_for_locks() for this list.
To keep such list for recover_from_failed_open_table_attempt(),
introduce a context class (Open_table_context), that collects
all requests.
A lot of minor cleanups and simplications that became possible
with this change.
------------------------------------------------------------
revno: 2617.23.18
committer: Davi Arnaut <Davi.Arnaut@Sun.COM>
branch nick: 4284-6.0
timestamp: Mon 2009-03-02 18:18:26 -0300
message:
Bug#989: If DROP TABLE while there's an active transaction, wrong binlog order
WL#4284: Transactional DDL locking
This is a prerequisite patch:
These changes are intended to split lock requests from granted
locks and to allow the memory and lifetime of granted locks to
be managed within the MDL subsystem. Furthermore, tickets can
now be shared and therefore are used to satisfy multiple lock
requests, but only shared locks can be recursive.
The problem is that the MDL subsystem morphs lock requests into
granted locks locks but does not manage the memory and lifetime
of lock requests, and hence, does not manage the memory of
granted locks either. This can be problematic because it puts the
burden of tracking references on the users of the subsystem and
it can't be easily done in transactional contexts where the locks
have to be kept around for the duration of a transaction.
Another issue is that recursive locks (when the context trying to
acquire a lock already holds a lock on the same object) requires
that each time the lock is granted, a unique lock request/granted
lock structure structure must be kept around until the lock is
released. This can lead to memory leaks in transactional contexts
as locks taken during the transaction should only be released at
the end of the transaction. This also leads to unnecessary wake
ups (broadcasts) in the MDL subsystem if the context still holds
a equivalent of the lock being released.
These issues are exacerbated due to the fact that WL#4284 low-level
design says that the implementation should "2) Store metadata locks
in transaction memory root, rather than statement memory root" but
this is not possible because a memory root, as implemented in mysys,
requires all objects allocated from it to be freed all at once.
This patch combines review input and significant code contributions
from Konstantin Osipov (kostja) and Dmitri Lenev (dlenev).
----------------------------------------------------------
revno: 2630.4.31
committer: Konstantin Osipov <konstantin@mysql.com>
branch nick: mysql-6.0-3726
timestamp: Thu 2008-06-12 06:23:08 +0400
message:
Extend the signature of TABLE_LIST::init_one_table() to
initialize lengths
This is part of WL#3726 post-review fixes.
---------------------------------------------
2630.7.3 Konstantin Osipov 2008-06-02
Various style changes preceding the removal of reopen_table().
(Post-review fixes for WL#3726).
Backport of:
------------------------------------------------------------
revno: 2630.4.1
committer: Dmitry Lenev <dlenev@mysql.com>
branch nick: mysql-6.0-3726-w
timestamp: Fri 2008-05-23 17:54:03 +0400
message:
WL#3726 "DDL locking for all metadata objects".
After review fixes in progress.
------------------------------------------------------------
This is the first patch in series. It transforms the metadata
locking subsystem to use a dedicated module (mdl.h,cc). No
significant changes in the locking protocol.
The import passes the test suite with the exception of
deprecated/removed 6.0 features, and MERGE tables. The latter
are subject to a fix by WL#4144.
Unfortunately, the original changeset comments got lost in a merge,
thus this import has its own (largely insufficient) comments.
This patch fixes Bug#25144 "replication / binlog with view breaks".
Warning: this patch introduces an incompatible change:
Under LOCK TABLES, it's no longer possible to FLUSH a table that
was not locked for WRITE.
Under LOCK TABLES, it's no longer possible to DROP a table or
VIEW that was not locked for WRITE.
******
Backport of:
------------------------------------------------------------
revno: 2630.4.2
committer: Dmitry Lenev <dlenev@mysql.com>
branch nick: mysql-6.0-3726-w
timestamp: Sat 2008-05-24 14:03:45 +0400
message:
WL#3726 "DDL locking for all metadata objects".
After review fixes in progress.
******
Backport of:
------------------------------------------------------------
revno: 2630.4.3
committer: Dmitry Lenev <dlenev@mysql.com>
branch nick: mysql-6.0-3726-w
timestamp: Sat 2008-05-24 14:08:51 +0400
message:
WL#3726 "DDL locking for all metadata objects"
Fixed failing Windows builds by adding mdl.cc to the lists
of files needed to build server/libmysqld on Windows.
******
Backport of:
------------------------------------------------------------
revno: 2630.4.4
committer: Dmitry Lenev <dlenev@mysql.com>
branch nick: mysql-6.0-3726-w
timestamp: Sat 2008-05-24 21:57:58 +0400
message:
WL#3726 "DDL locking for all metadata objects".
Fix for assert failures in kill.test which occured when one
tried to kill ALTER TABLE statement on merge table while it
was waiting in wait_while_table_is_used() for other connections
to close this table.
These assert failures stemmed from the fact that cleanup code
in this case assumed that temporary table representing new
version of table was open with adding to THD::temporary_tables
list while code which were opening this temporary table wasn't
always fulfilling this.
This patch changes code that opens new version of table to
always do this linking in. It also streamlines cleanup process
for cases when error occurs while we have new version of table
open.
******
WL#3726 "DDL locking for all metadata objects"
Add libmysqld/mdl.cc to .bzrignore.
******
Backport of:
------------------------------------------------------------
revno: 2630.4.6
committer: Dmitry Lenev <dlenev@mysql.com>
branch nick: mysql-6.0-3726-w
timestamp: Sun 2008-05-25 00:33:22 +0400
message:
WL#3726 "DDL locking for all metadata objects".
Addition to the fix of assert failures in kill.test caused by
changes for this worklog.
Make sure we close the new table only once.
The problem is that the server could crash when attempting
to access a non-conformant proc system table. One such case
was a crash when invoking stored procedure related statements
on a 5.1 server with a proc system table in the 5.0 format.
The solution is to validate the proc system table format
before attempts to access it are made. If the table is not
in the format that the server expects, a message is written
to the error log and the statement that caused the table to
be accessed fails.
General overview:
The logic for switching to row format when binlog_format=MIXED had
numerous flaws. The underlying problem was the lack of a consistent
architecture.
General purpose of this changeset:
This changeset introduces an architecture for switching to row format
when binlog_format=MIXED. It enforces the architecture where it has
to. It leaves some bugs to be fixed later. It adds extensive tests to
verify that unsafe statements work as expected and that appropriate
errors are produced by problems with the selection of binlog format.
It was not practical to split this into smaller pieces of work.
Problem 1:
To determine the logging mode, the code has to take several parameters
into account (namely: (1) the value of binlog_format; (2) the
capabilities of the engines; (3) the type of the current statement:
normal, unsafe, or row injection). These parameters may conflict in
several ways, namely:
- binlog_format=STATEMENT for a row injection
- binlog_format=STATEMENT for an unsafe statement
- binlog_format=STATEMENT for an engine only supporting row logging
- binlog_format=ROW for an engine only supporting statement logging
- statement is unsafe and engine does not support row logging
- row injection in a table that does not support statement logging
- statement modifies one table that does not support row logging and
one that does not support statement logging
Several of these conflicts were not detected, or were detected with
an inappropriate error message. The problem of BUG#39934 was that no
appropriate error message was written for the case when an engine
only supporting row logging executed a row injection with
binlog_format=ROW. However, all above cases must be handled.
Fix 1:
Introduce new error codes (sql/share/errmsg.txt). Ensure that all
conditions are detected and handled in decide_logging_format()
Problem 2:
The binlog format shall be determined once per statement, in
decide_logging_format(). It shall not be changed before or after that.
Before decide_logging_format() is called, all information necessary to
determine the logging format must be available. This principle ensures
that all unsafe statements are handled in a consistent way.
However, this principle is not followed:
thd->set_current_stmt_binlog_row_based_if_mixed() is called in several
places, including from code executing UPDATE..LIMIT,
INSERT..SELECT..LIMIT, DELETE..LIMIT, INSERT DELAYED, and
SET @@binlog_format. After Problem 1 was fixed, that caused
inconsistencies where these unsafe statements would not print the
appropriate warnings or errors for some of the conflicts.
Fix 2:
Remove calls to THD::set_current_stmt_binlog_row_based_if_mixed() from
code executed after decide_logging_format(). Compensate by calling the
set_current_stmt_unsafe() at parse time. This way, all unsafe statements
are detected by decide_logging_format().
Problem 3:
INSERT DELAYED is not unsafe: it is logged in statement format even if
binlog_format=MIXED, and no warning is printed even if
binlog_format=STATEMENT. This is BUG#45825.
Fix 3:
Made INSERT DELAYED set itself to unsafe at parse time. This allows
decide_logging_format() to detect that a warning should be printed or
the binlog_format changed.
Problem 4:
LIMIT clause were not marked as unsafe when executed inside stored
functions/triggers/views/prepared statements. This is
BUG#45785.
Fix 4:
Make statements containing the LIMIT clause marked as unsafe at
parse time, instead of at execution time. This allows propagating
unsafe-ness to the view.
If [NOT] PRESERVE was not given, parser always defaulted to NOT
PRESERVE, making it impossible for the "not given = no change"
rule to work in ALTER EVENT. Leaving out the PRESERVE-clause
defaults to NOT PRESERVE on CREATE now, and to "no change" in
ALTER.
If [NOT] PRESERVE was not given, parser always defaulted to NOT
PRESERVE, making it impossible for the "not given = no change"
rule to work in ALTER EVENT. Leaving out the PRESERVE-clause
defaults to NOT PRESERVE on CREATE now, and to "no change" in
ALTER.
The problem is that one can not create a stored routine if sql_mode
contains NO_ENGINE_SUBSTITUTION or PAD_CHAR_TO_FULL_LENGTH. Also when
a event is created, the mode is silently lost if sql_mode contains one
of the aforementioned. This was happening because the table definitions
which stored sql_mode values weren't being updated to accept new values
of sql_mode.
The solution is to update, in a backwards compatible manner, the various
table definitions (columns) that store the sql_mode value to take into
account the new possible values. One incompatible change is that if a event
that is being created can't be stored to the mysql.event table, an error
will be raised.
The tests case also ensure that new SQL modes will be added to the mysql.proc
and mysql.event tables, otherwise the tests will fail.
If a stored function that contains a drop temporary table statement
is invoked by a create temporary table of the same name may cause
a server crash. The problem is that when dropping a table no check
is done to ensure that table is not being used by some outer query
(or outer statement), potentially leaving the outer query with a
reference to a stale (freed) table.
The solution is when dropping a temporary table, always check if
the table is being used by some outer statement as a temporary
table can be dropped inside stored procedures.
The check is performed by looking at the TABLE::query_id value for
temporary tables. To simplify this check and to solve a bug related
to handling of temporary tables in prelocked mode, this patch changes
the way in which this member is used to track the fact that table is
used/unused. Now we ensure that TABLE::query_id is zero for unused
temporary tables (which means that all temporary tables which were
used by a statement should be marked as free for reuse after it's
execution has been completed).
There actually were several problems here:
- WRITE-lock is required to load events from the mysql.event table,
but in the read-only mode an ordinary user can not acquire it;
- Security_context::master_access attribute was not properly
initialized in Security_context::init(), which led to differences
in behavior with and without debug configure options.
- if the server failed to load events from mysql.event, it forgot to
close the mysql.event table, that led to the coredump, described
in the bug report.
The patch is to fix all these problems:
- Use the super-user to acquire WRITE-lock on the mysql.even table;
- The WRITE-lock is acquired by the event scheduler in two cases:
- on initial loading of events from the database;
- when an event has been executed, so its attributes should
be updated.
Other cases when WRITE-lock is needed for the mysql.event table
happen under the user account. So, nothing should be changed there
for the read-only mode. The user is able to create/update/drop
an event only if he is a super-user.
- Initialize Security_context::master_access;
- Close the mysql.event table in case something went wrong.
Faster thr_alarm()
Added 'Opened_files' status variable to track calls to my_open()
Don't give warnings when running mysql_install_db
Added option --source-install to mysql_install_db
I had to do the following renames() as used polymorphism didn't work with Forte compiler on 64 bit systems
index_read() -> index_read_map()
index_read_idx() -> index_read_idx_map()
index_read_last() -> index_read_last_map()
Creating an EVENT to be executed at a time close to the end of the allowed
range (2038.01.19 03:14:07 UTC) would cause the server to crash. The
expected behavior is to accept all calendar times within the interval and
reject all other values without crashing.
This patch replaces the function 'sec_to_epoch_TIME' with a Time_zone API call.
This function was broken because it invoked the internal function 'sec_to_epoch'
without respecting the restrictions on the function parameters (and this caused
assertion failure). It also was used as a reverse function to
Time_zone_utc::gmt_sec_to_TIME which it isn't.
- BUG#11986: Stored routines and triggers can fail if the code
has a non-ascii symbol
- BUG#16291: mysqldump corrupts string-constants with non-ascii-chars
- BUG#19443: INFORMATION_SCHEMA does not support charsets properly
- BUG#21249: Character set of SP-var can be ignored
- BUG#25212: Character set of string constant is ignored (stored routines)
- BUG#25221: Character set of string constant is ignored (triggers)
There were a few general problems that caused these bugs:
1. Character set information of the original (definition) query for views,
triggers, stored routines and events was lost.
2. mysqldump output query in client character set, which can be
inappropriate to encode definition-query.
3. INFORMATION_SCHEMA used strings with mixed encodings to display object
definition;
1. No query-definition-character set.
In order to compile query into execution code, some extra data (such as
environment variables or the database character set) is used. The problem
here was that this context was not preserved. So, on the next load it can
differ from the original one, thus the result will be different.
The context contains the following data:
- client character set;
- connection collation (character set and collation);
- collation of the owner database;
The fix is to store this context and use it each time we parse (compile)
and execute the object (stored routine, trigger, ...).
2. Wrong mysqldump-output.
The original query can contain several encodings (by means of character set
introducers). The problem here was that we tried to convert original query
to the mysqldump-client character set.
Moreover, we stored queries in different character sets for different
objects (views, for one, used UTF8, triggers used original character set).
The solution is
- to store definition queries in the original character set;
- to change SHOW CREATE statement to output definition query in the
binary character set (i.e. without any conversion);
- introduce SHOW CREATE TRIGGER statement;
- to dump special statements to switch the context to the original one
before dumping and restore it afterwards.
Note, in order to preserve the database collation at the creation time,
additional ALTER DATABASE might be used (to temporary switch the database
collation back to the original value). In this case, ALTER DATABASE
privilege will be required. This is a backward-incompatible change.
3. INFORMATION_SCHEMA showed non-UTF8 strings
The fix is to generate UTF8-query during the parsing, store it in the object
and show it in the INFORMATION_SCHEMA.
Basically, the idea is to create a copy of the original query convert it to
UTF8. Character set introducers are removed and all text literals are
converted to UTF8.
This UTF8 query is intended to provide user-readable output. It must not be
used to recreate the object. Specialized SHOW CREATE statements should be
used for this.
The reason for this limitation is the following: the original query can
contain symbols from several character sets (by means of character set
introducers).
Example:
- original query:
CREATE VIEW v1 AS SELECT _cp1251 'Hello' AS c1;
- UTF8 query (for INFORMATION_SCHEMA):
CREATE VIEW v1 AS SELECT 'Hello' AS c1;
The following type conversions was done:
- Changed byte to uchar
- Changed gptr to uchar*
- Change my_string to char *
- Change my_size_t to size_t
- Change size_s to size_t
Removed declaration of byte, gptr, my_string, my_size_t and size_s.
Following function parameter changes was done:
- All string functions in mysys/strings was changed to use size_t
instead of uint for string lengths.
- All read()/write() functions changed to use size_t (including vio).
- All protocoll functions changed to use size_t instead of uint
- Functions that used a pointer to a string length was changed to use size_t*
- Changed malloc(), free() and related functions from using gptr to use void *
as this requires fewer casts in the code and is more in line with how the
standard functions work.
- Added extra length argument to dirname_part() to return the length of the
created string.
- Changed (at least) following functions to take uchar* as argument:
- db_dump()
- my_net_write()
- net_write_command()
- net_store_data()
- DBUG_DUMP()
- decimal2bin() & bin2decimal()
- Changed my_compress() and my_uncompress() to use size_t. Changed one
argument to my_uncompress() from a pointer to a value as we only return
one value (makes function easier to use).
- Changed type of 'pack_data' argument to packfrm() to avoid casts.
- Changed in readfrm() and writefrom(), ha_discover and handler::discover()
the type for argument 'frmdata' to uchar** to avoid casts.
- Changed most Field functions to use uchar* instead of char* (reduced a lot of
casts).
- Changed field->val_xxx(xxx, new_ptr) to take const pointers.
Other changes:
- Removed a lot of not needed casts
- Added a few new cast required by other changes
- Added some cast to my_multi_malloc() arguments for safety (as string lengths
needs to be uint, not size_t).
- Fixed all calls to hash-get-key functions to use size_t*. (Needed to be done
explicitely as this conflict was often hided by casting the function to
hash_get_key).
- Changed some buffers to memory regions to uchar* to avoid casts.
- Changed some string lengths from uint to size_t.
- Changed field->ptr to be uchar* instead of char*. This allowed us to
get rid of a lot of casts.
- Some changes from true -> TRUE, false -> FALSE, unsigned char -> uchar
- Include zlib.h in some files as we needed declaration of crc32()
- Changed MY_FILE_ERROR to be (size_t) -1.
- Changed many variables to hold the result of my_read() / my_write() to be
size_t. This was needed to properly detect errors (which are
returned as (size_t) -1).
- Removed some very old VMS code
- Changed packfrm()/unpackfrm() to not be depending on uint size
(portability fix)
- Removed windows specific code to restore cursor position as this
causes slowdown on windows and we should not mix read() and pread()
calls anyway as this is not thread safe. Updated function comment to
reflect this. Changed function that depended on original behavior of
my_pwrite() to itself restore the cursor position (one such case).
- Added some missing checking of return value of malloc().
- Changed definition of MOD_PAD_CHAR_TO_FULL_LENGTH to avoid 'long' overflow.
- Changed type of table_def::m_size from my_size_t to ulong to reflect that
m_size is the number of elements in the array, not a string/memory
length.
- Moved THD::max_row_length() to table.cc (as it's not depending on THD).
Inlined max_row_length_blob() into this function.
- More function comments
- Fixed some compiler warnings when compiled without partitions.
- Removed setting of LEX_STRING() arguments in declaration (portability fix).
- Some trivial indentation/variable name changes.
- Some trivial code simplifications:
- Replaced some calls to alloc_root + memcpy to use
strmake_root()/strdup_root().
- Changed some calls from memdup() to strmake() (Safety fix)
- Simpler loops in client-simple.c
when there are no up-to-date system tables to support it:
- initialize the scheduler before reporting "Ready for connections".
This ensures that warnings, if any, are printed before "Ready for
connections", and this message is not mangled.
- do not abort the scheduler if there are no system tables
- check the tables once at start up, remember the status and disable
the scheduler if the tables are not up to date.
If one attempts to use the scheduler with bad tables,
issue an error message.
- clean up the behaviour of the module under LOCK TABLES and pre-locking
mode
- make sure implicit commit of Events DDL works as expected.
- add more tests
Collateral clean ups in the events code.
This patch fixes Bug#23631 Events: SHOW VARIABLES doesn't work
when mysql.event is damaged
Made year 2000 handling more uniform
Removed year 2000 handling out from calc_days()
The above removes some bugs in date/datetimes with year between 0 and 200
Now we get a note when we insert a datetime value into a date column
For default values to CREATE, don't give errors for warning level NOTE
Fixed some compiler failures
Added library ws2_32 for windows compilation (needed if we want to compile with IOCP support)
Removed duplicate typedef TIME and replaced it with MYSQL_TIME
Better (more complete) fix for: Bug#21103 "DATE column not compared as DATE"
Fixed properly Bug#18997 "DATE_ADD and DATE_SUB perform year2K autoconversion magic on 4-digit year value"
Fixed Bug#23093 "Implicit conversion of 9912101 to date does not match cast(9912101 as date)"
