The test failed due to Bug #29790.
However, logics of the failing part does not need I_S selecting.
Fixing to remove the non-deterministic I_S selecting as redundant
from a part of the test dealing with BUG@22864.
mysql-test/suite/rpl/r/rpl_row_create_table.result:
results updated.
mysql-test/suite/rpl/t/disabled.def:
rpl_row_create_table is re-enabled.
mysql-test/suite/rpl/t/rpl_row_create_table.test:
removed a non-deterministic I_S selecting as redundant
from a part of the test dealing with BUG@22864.
backporting of bug@30703 to 5.1.
The fixes are backed up with a regression test.
mysql-test/include/test_fieldsize.inc:
waiting to stop is to be actually exclusively for SQL thread.
mysql-test/suite/rpl/r/rpl_show_slave_running.result:
new results file is added.
mysql-test/suite/rpl/t/rpl_show_slave_running.test:
regression test for bug#30703 is added.
sql/mysqld.cc:
refining `show status like slave_running' handler to correspond to one of
`show slave status'.
sql/slave.cc:
A dbug-sync point is added to complement the regression test.
removed in MySQL 6.0
CREATE TABLE... TYPE= returns the warning "The syntax
'TYPE=storage_engine' is deprecated and will be removed in
MySQL 6.0. Please use 'ENGINE=storage_engine' instead"
This syntax is deprecated already from version 5.4.4, so
the message has been changed.
In addition, the deprecation macro was changed to reflect
the ServerPT decision not to include version number in the
warning message.
A number of test result files have been changed as a
consequence of the change in the deprecation macro.
into slow log
While processing a statement, down the mysql_parse execution
stack, the thd->enable_slow_log can be assigned to
opt_log_slow_admin_statements, depending whether one is executing
administrative statements, such as ALTER TABLE, OPTIMIZE,
ANALYZE, etc, or not. This can have an impact on slow logging for
statements that are executed after an administrative statement
execution is completed.
When executing statements directly from the user this is fine
because, the thd->enable_slow_log is reset right at the beginning
of the dispatch_command function, ie, everytime a new statement
is set is set to execute.
On the other hand, for slave SQL thread (sql_thd) the story is a
bit different. When in SBR the sql_thd applies statements by
calling mysql_parse. Right after, it calls log_slow_statement
function to log them if they take too long. Calling mysql_parse
directly is fine, but also means that dispatch_command function
is bypassed. As a consequence, thd->enable_slow_log does not get
a chance to be reset before the next statement to be executed by
the sql_thd. If the statement just executed by the sql_thd was an
administrative statement and logging of admin statements was
disabled, this means that sql_thd->enable_slow_log will be set to
0 (disabled) from that moment on. End result: sql_thd stops
logging slow statements.
We fix this by resetting the value of sql_thd->enable_slow_log to
the value of opt_log_slow_slave_statements right after
log_slow_stement is called by the sql_thd.
To 5.x Release
Notes
=====
This is a backport of BUG#23300 into 5.1 GA.
Original cset revid (in betony):
luis.soares@sun.com-20090929140901-s4kjtl3iiyy4ls2h
Description
===========
When using replication, the slave will not log any slow query
logs queries replicated from the master, even if the
option "--log-slow-slave-statements" is set and these take more
than "log_query_time" to execute.
In order to log slow queries in replicated thread one needs to
set the --log-slow-slave-statements, so that the SQL thread is
initialized with the correct switch. Although setting this flag
correctly configures the slave thread option to log slow queries,
there is an issue with the condition that is used to check
whether to log the slow query or not. When replaying binlog
events the statement contains the SET TIMESTAMP clause which will
force the slow logging condition check to fail. Consequently, the
slow query logging will not take place.
This patch addresses this issue by removing the second condition
from the log_slow_statements as it prevents slow queries to be
binlogged and seems to be deprecated.
Original revision:
------------------------------------------------------------
revision-id: li-bing.song@sun.com-20100130124925-o6sfex42b6noyc6x
parent: joro@sun.com-20100129145427-0n79l9hnk0q43ajk
committer: <Li-Bing.Song@sun.com>
branch nick: mysql-5.1-bugteam
timestamp: Sat 2010-01-30 20:49:25 +0800
message:
Bug #48321 CURRENT_USER() incorrectly replicated for DROP/RENAME USER;
REVOKE/GRANT; ALTER EVENT.
The following statements support the CURRENT_USER() where a user is needed.
DROP USER
RENAME USER CURRENT_USER() ...
GRANT ... TO CURRENT_USER()
REVOKE ... FROM CURRENT_USER()
ALTER DEFINER = CURRENT_USER() EVENT
but, When these statements are binlogged, CURRENT_USER() just is binlogged
as 'CURRENT_USER()', it is not expanded to the real user name. When slave
executes the log event, 'CURRENT_USER()' is expand to the user of slave
SQL thread, but SQL thread's user name always NULL. This breaks the replication.
After this patch, All above statements are rewritten when they are binlogged.
The CURRENT_USER() is expanded to the real user's name and host.
------------------------------------------------------------
REVOKE/GRANT; ALTER EVENT.
The following statements support the CURRENT_USER() where a user is needed.
DROP USER
RENAME USER CURRENT_USER() ...
GRANT ... TO CURRENT_USER()
REVOKE ... FROM CURRENT_USER()
ALTER DEFINER = CURRENT_USER() EVENT
but, When these statements are binlogged, CURRENT_USER() just is binlogged
as 'CURRENT_USER()', it is not expanded to the real user name. When slave
executes the log event, 'CURRENT_USER()' is expand to the user of slave
SQL thread, but SQL thread's user name always NULL. This breaks the replication.
After this patch, All above statements are rewritten when they are binlogged.
The CURRENT_USER() is expanded to the real user's name and host.
WL#5182 is a follow-up to WL#5154, deprecating a few more options
and system variables.
client/client_priv.h:
The warning message has been changed to not include
a specific version number in the text.
client/mysql.cc:
--no-tee is deprecated
client/mysqldump.c:
--all is deprecated
-a now points to create-options
mysql-test/r/mysqlbinlog.result:
Warning text changed
mysql-test/suite/rpl/r/rpl_row_mysqlbinlog.result:
Warning text changed
sql/mysql_priv.h:
The warning message has been changed to not include
a specific version number in the text.
sql/mysqld.cc:
--use-symbolic-links is deprecated
-s now points to --symbolic-links
--warnings is deprecated
-W now points to --log-warnings
myisam_max_extra_sort_file_size is deprecated
record_buffer is deprecated
--log-update is deprecated
--sql-bin-update-same is deprecated
--skip-locking is deprecated
--skip-symlink is deprecated
--enable-locking is deprecated
--delay-key-write-for-all-tables is deprecated
The 'rpl_get_master_version_and_clock' test verifies if the slave I/O
thread tries to reconnect to master when it tries to get the values of
the UNIX_TIMESTAMP, SERVER_ID from master under network disconnection.
So the master server is restarted for making the transient network
disconnection, during the period the COM_REGISTER_SLAVE failures are
produced in server log file when the slave I/O thread tries to
register on master.
To fix the problem, suppress COM_REGISTER_SLAVE failures in server log
file by mtr suppression, because they are expected.
mysql-test/suite/rpl/r/rpl_get_master_version_and_clock.result:
Removed mtr.add_suppression("Get master clock failed with error: ")
and mtr.add_suppression("Get master SERVER_ID failed with error: ").
Because they are suppressed globally.
In RBR, DDL statement will change binlog format to non row-based
format before it is binlogged, but the binlog format was not be
restored, and then manipulating a temporary table can not reset binlog
format to row-based format rightly. So that the manipulated statement
is binlogged with statement-based format.
To fix the problem, restore the state of binlog format after the DDL
statement is binlogged.
mysql-test/extra/rpl_tests/rpl_tmp_table_and_DDL.test:
Added the test file to verify if executing DDL statement before
trying to manipulate a temporary table causes row-based replication
to break with error 'table does not exist'.
mysql-test/suite/binlog/r/binlog_row_mix_innodb_myisam.result:
Correct the test result, all the above binlog event
should be row-based after the bug49132 is fixed IN RBR.
mysql-test/suite/ndb/r/ndb_tmp_table_and_DDL.result:
Test result for bug#49132 base on ndb engine.
mysql-test/suite/ndb/t/ndb_tmp_table_and_DDL.test:
Added the test file to verify if executing DDL statement before
trying to manipulate a temporary table causes row-based replication
to break with error 'table does not exist' base on ndb engine.
mysql-test/suite/rpl/r/rpl_tmp_table_and_DDL.result:
Test result for bug#49132 base on myisam engine.
mysql-test/suite/rpl/t/rpl_tmp_table_and_DDL.test:
Added the test file to verify if executing DDL statement before
trying to manipulate a temporary table causes row-based replication
to break with error 'table does not exist' base on myisam engine.
sql/event_db_repository.cc:
Added code to restore the state of binlog format after the DDL
statement is binlogged.
sql/events.cc:
Added code to restore the state of binlog format after the DDL
statement is binlogged.
sql/sp.cc:
Added code to restore the state of binlog format after the DDL
statement is binlogged.
sql/sql_acl.cc:
Added code to restore the state of binlog format after the DDL
statement is binlogged.
sql/sql_udf.cc:
Added code to restore the state of binlog format after the DDL
statement is binlogged.
cant find record
Some engines return data for the record. Despite the fact that
the null bit is set for some fields, their old value may still in
the row. This can happen when unpacking an AI from the binlog on
top of a previous record in which a field is set to NULL, which
previously contained a value. Ultimately, this may cause the
comparison of records to fail when the slave is doing an index or
range scan.
We fix this by deploying a call to reset() for each field that is
set to null while unpacking a row from the binary log.
Furthermore, we also add mixed mode test case to cover the
scenario where updating and setting a field to null through a
Query event and later searching it through a rows event will
succeed.
Finally, we also change the reset() method, from Field_bit class,
so that it takes into account bits stored among the null bits and
not only the ones stored in the record.
mysql-test/suite/rpl/t/rpl_set_null_innodb.test:
InnoDB test.
mysql-test/suite/rpl/t/rpl_set_null_myisam.test:
MyISAM test.
mysql-test/suite/rpl_ndb/t/rpl_ndb_set_null.test:
NDB test.
sql/field.h:
Changed reset so that it also clears the bits
among the null_bits for the Field_bit class.
sql/rpl_record.cc:
Resetting field after setting it to null when unpacking
row.
It is well-known that due to concurrency issues, a slave can become
inconsistent when a transaction contains updates to both transaction and
non-transactional tables in statement and mixed modes.
In a nutshell, the current code-base tries to preserve causality among the
statements by writing non-transactional statements to the txn-cache which
is flushed upon commit. However, modifications done to non-transactional
tables on behalf of a transaction become immediately visible to other
connections but may not immediately get into the binary log and therefore
consistency may be broken.
In general, it is impossible to automatically detect causality/dependency
among statements by just analyzing the statements sent to the server. This
happen because dependency may be hidden in the application code and it is
necessary to know a priori all the statements processed in the context of
a transaction such as in a procedure. Moreover, even for the few cases that
we could automatically address in the server, the computation effort
required could make the approach infeasible.
So, in this patch we introduce the option
- "--binlog-direct-non-transactional-updates" that can be used to bypass
the current behavior in order to write directly to binary log statements
that change non-transactional tables.
mysql-test/extra/rpl_tests/rpl_mixing_engines.inc:
Backported this from Celosia to improve the test cases related to the NTM issue.
sql/log.cc:
Checks the --binlog-direct-non-transactional-updates before choosing
to either use the trxn-cache or not.
sql/mysqld.cc:
Introduces the option --binlog-direct-non-transactional-updates.
sql/set_var.cc:
Introduces the option --binlog-direct-non-transactional-updates.
sql/sql_class.h:
Introduces the option --binlog-direct-non-transactional-updates.
'CREATE TABLE IF NOT EXISTS ... SELECT' statement were causing 'CREATE
TEMPORARY TABLE ...' to be written to the binary log in row-based
mode (a.k.a. RBR), when there was a temporary table with the same name.
Because the 'CREATE TABLE ... SELECT' statement was executed as
'INSERT ... SELECT' into the temporary table. Since in RBR mode no
other statements related to temporary tables are written into binary log,
this sometimes broke replication.
This patch changes behavior of 'CREATE TABLE [IF NOT EXISTS] ... SELECT ...'.
it ignores existence of temporary table with the
same name as table being created and is interpreted
as attempt to create/insert into base table. This makes behavior of
'CREATE TABLE [IF NOT EXISTS] ... SELECT' consistent with
how ordinary 'CREATE TABLE' and 'CREATE TABLE ... LIKE' behave.
BUG#49481: RBR: MyISAM and bit fields may cause slave to stop on delete:
cant find record
BUG#49482: RBR: Replication may break on deletes when MyISAM tables +
char field are used
When using MyISAM tables, despite the fact that the null bit is
set for some fields, their old value is still in the row. This
can cause the comparison of records to fail when the slave is
doing an index or range scan.
We fix this by avoiding memcmp for MyISAM tables when comparing
records. Additionally, when comparing field by field, we first
check if both fields are not null and if so, then we compare
them. If just one field is null we return failure immediately. If
both fields are null, we move on to the next field.
Problem: When RAND() is binlogged in statement mode, the seed is
binlogged too, so the replication slave generates the same
sequence of random numbers. This makes replication work in many
cases, but not in all cases: the order of rows is not guaranteed
for, e.g., UPDATE or INSERT...SELECT statements, so the row data
will be different if master and slave retrieve the rows in
different orders.
Fix: Mark RAND() as unsafe. It will generate a warning if
binlog_format=STATEMENT and switch to row-logging if
binlog_format=ROW.
mysql-test/extra/rpl_tests/rpl_row_func003.test:
updated test case to ignore new warnings
mysql-test/suite/binlog/r/binlog_unsafe.result:
updated result file
mysql-test/suite/binlog/t/binlog_unsafe.test:
Added test for RAND().
Also clarified some old comments.
mysql-test/suite/rpl/r/rpl_misc_functions.result:
updated result file
mysql-test/suite/rpl/r/rpl_nondeterministic_functions.result:
updated test case to ignore new warnings
mysql-test/suite/rpl/r/rpl_optimize.result:
updated result file
mysql-test/suite/rpl/r/rpl_row_func003.result:
updated result file
mysql-test/suite/rpl/t/rpl_misc_functions.test:
updated test case to ignore new warnings
mysql-test/suite/rpl/t/rpl_nondeterministic_functions.test:
updated test case to ignore new warnings
mysql-test/suite/rpl/t/rpl_optimize.test:
updated test case to ignore new warnings
mysql-test/suite/rpl/t/rpl_trigger.test:
updated test case to ignore new warnings
mysql-test/suite/rpl_ndb/r/rpl_ndb_func003.result:
updated result file
sql/item_create.cc:
Mark RAND() unsafe.
Manually deleteing one or more entries from 'master-bin.index', will
cause master infinitely loop to send one binlog file.
When starting a dump session, master opens index file and search the binlog file
which is being requested by the slave. The position of the binlog file in the
index file is recorded. it will be used to find the next binlog file when current
binlog file has dumped completely. As only the position is used, it may
not get the correct file if some entries has been removed manually from the index file.
the master will reopen the current binlog file which has been dump completely
and redump it if it can not get the next binlog file's name from index file.
It obviously is a logical error.
Even though it is allowed to manually change index file,
but it is not recommended. so after this patch, master
sends a fatal error to slave and close the dump session if a new binlog file
has been generated and master can not get it from the index file.
For tables with metadata sizes ranging from 251 to 255 the size
of the event data (m_data_size) was being improperly calculated
in the Table_map_log_event constructor. This was due to the fact
that when writing the Table_map_log_event body (in
Table_map_log_event::write_data_body) a call to net_store_length
is made for packing the m_field_metadata_size. It happens that
net_store_length uses *one* byte for storing
m_field_metadata_size when it is smaller than 251 but *three*
bytes when it exceeds that value. BUG 42749 had already
pinpointed and fix this fact, but the fix was incomplete, as the
calculation in the Table_map_log_event constructor considers 255
instead of 251 as the threshold to increment m_data_size by
three. Thence, the window for having a mismatch between the
number of bytes written and the number of bytes accounted in the
event length (m_data_size) was left open for
m_field_metadata_size values between 251 and 255.
We fix this by changing the condition in the Table_map_log_event
constructor to match the one in the net_store_length, ie,
increment one byte if m_field_metadata_size < 251 and three if it
exceeds this value.
mysql-test/suite/rpl/r/rpl_row_tbl_metadata.result:
Updated result file.
mysql-test/suite/rpl/t/rpl_row_tbl_metadata.test:
Changes to the original test case: added slave and moved
file into the rpl suite.
New test case: replicates two tables one with 250 and
another with 252 metadata sizes. This exercises the usage
of 1 or 3 bytes while packing the m_field_metadata_size.
sql/log_event.cc:
Made the m_data_size calculation for the table map log event
to match the number of bytes used while packing the
m_field_metadata_size value (according to net_store_length
function in pack.c).
This bug is the same problem as Bug 49836 for 5.1 versions.
mysql-test/suite/rpl/r/rpl_geometry.result:
Test case for bug 48776
mysql-test/suite/rpl/t/rpl_geometry.test:
Test case for bug 48776
sql/rpl_utility.h:
Add missing case MYSQL_TYPE_GEOMETRY
In statement-based or mixed-mode replication, use DROP TEMPORARY TABLE
to drop multiple tables causes different errors on master and slave,
when one or more of these tables do not exist. Because when executed
on slave, it would automatically add IF EXISTS to the query to ignore
all ER_BAD_TABLE_ERROR errors.
To fix the problem, do not add IF EXISTS when executing DROP TEMPORARY
TABLE on the slave, and clear the ER_BAD_TABLE_ERROR error after
execution if the query does not expect any errors.
mysql-test/suite/rpl/r/rpl_drop_temp.result:
Updated for the patch of bug#49137.
mysql-test/suite/rpl/t/rpl_drop_temp.test:
Added the test file to verify if DROP MULTI TEMPORARY TABLE
will cause different errors on master and slave, when one or
more of these tables do not exist.
sql/log_event.cc:
Added code to handle above cases which are
removed from sql_parse.cc
sql/sql_parse.cc:
Remove the code to issue the 'Unknown table' error,
if the temporary table does not exist when dropping
it on slave. The above cases decribed in comments
will be handled later in log_event.cc.
'LOAD DATA CONCURRENT [LOCAL] INFILE ...' statment only is binlogged as
'LOAD DATA [LOCAL] INFILE ...' in SBR and MBR. As a result, if replication is on,
queries on slaves will be blocked by the replication SQL thread.
This patch write code to write 'CONCURRENT' into the log event if 'CONCURRENT' option
is in the original statement in SBR and MBR.
{PROCEDURE|FUNCTION} FROM ...'
The master would hit an assertion when binary log was
active. This was due to the fact that the thread's diagnostics
area was being cleared before writing to the binlog,
independently of mysql_routine_grant returning an error or
not. When mysql_routine_grant was to return an error, the return
value and the diagnostics area contents would
mismatch. Consequently, neither my_ok would be called nor an
error would be signaled in the diagnostics area, eventually
triggering the assertion in net_end_statement.
We fix this by not clearing the diagnostics area at binlogging
time.
escaped field names
When in mixed or statement mode, the master logs LOAD DATA
queries by resorting to an Execute_load_query_log_event. This
event does not contain the original query, but a rewritten
version of it, which includes the table field names. However, the
rewrite does not escape the field names. If these names match a
reserved keyword, then the slave will stop with a syntax error
when executing the event.
We fix this by escaping the fields names as it happens already
for the table name.
mysql-test/extra/rpl_tests/rpl_loaddata.test:
Added test case for the reported bug.
mysql-test/r/mysqlbinlog.result:
Changed result to support escaped field name.
mysql-test/suite/binlog/r/binlog_killed_simulate.result:
Changed result to support escaped field name.
mysql-test/suite/binlog/r/binlog_row_mix_innodb_myisam.result:
Changed result to support escaped field name.
mysql-test/suite/binlog/r/binlog_stm_blackhole.result:
Changed result to support escaped field name.
mysql-test/suite/binlog/r/binlog_stm_mix_innodb_myisam.result:
Changed result to support escaped field name.
mysql-test/suite/rpl/r/rpl_innodb_mixed_dml.result:
Changed result to support escaped field name.
mysql-test/suite/rpl/r/rpl_loaddata.result:
Added result for new test.
Changed show slave status positions which are now different because of
extra escape character in field names.
mysql-test/suite/rpl/r/rpl_loaddata_fatal.result:
Changed show slave status positions which are now different because of
extra escape character.
mysql-test/suite/rpl/r/rpl_loaddata_map.result:
Changed result to support escaped field name.
mysql-test/suite/rpl/r/rpl_stm_log.result:
Changed result to support escaped field name.
mysql-test/t/mysqlbinlog.test:
Changed positions which is now different because of extra escape
character in field names.
sql/sql_load.cc:
Appended escape characters before and after field names.
The 'slave_patternload_file' is assigned to the real path of the load data file
when initializing the object of Relay_log_info. But the path of the load data
file is not formatted to real path when executing event from relay log. So the
error will be encountered if the path of the load data file is a symbolic link.
Actually the global 'opt_secure_file_priv' is not formatted to real path when
loading data from file. So the same thing will happen too.
To fix these errors, the path of the load data file should be formatted to
real path when executing event from relay log. And the 'opt_secure_file_priv'
should be formatted to real path when loading data infile.
mysql-test/suite/rpl/r/rpl_loaddata_symlink.result:
Test result for bug#43913.
mysql-test/suite/rpl/t/rpl_loaddata_symlink-master.sh:
Added the test file to create a link from $MYSQLTEST_VARDIR/std_data
to $MYSQLTEST_VARDIR/std_data_master_link
mysql-test/suite/rpl/t/rpl_loaddata_symlink-slave.sh:
Added the test file to create a link from $MYSQLTEST_VARDIR/std_data
to $MYSQLTEST_VARDIR/std_data_slave_link
mysql-test/suite/rpl/t/rpl_loaddata_symlink.test:
Added the test file to verify if loading data infile will work fine
if the path of the load data file is a symbolic link.
sql/rpl_rli.cc:
Added call 'my_realpath' function for avoiding sometimes the 'fn_format'
function can't format real path rightly.
<tmp_tbl> with RBL
When binlogging the statement, the server always handle the existing
object as a table, even though it is a view. However a view is
handled differently in other parts of the code thus leading the
statement to crash in RBL if the view exists.
This happens because the underlying tables for the view are not opened
when we try to call store_create_info() on the view in order to build
a CREATE TABLE statement.
This patch will only address the crash problem, other binlogging
problems related to CREATE TABLE IF NOT EXISTS LIKE when the existing
object is a view will be solved by BUG 47442.
In RBR, All statements operating on temporary tables should not be binlogged.
Despite this fact, after executing 'TRUNCATE... ' on a temporary table,
the command is still logged, even if in row-based mode. Consequently, this raises
problems in the slave as the table may not exist, resulting in an
execution failure. Ultimately, this causes the slave to report
an error and abort.
After this patch, 'TRUNCATE ...' statement on a temporary table will not be
binlogged in RBR.
Problem: Some system functions that could return different values on
master and slave were not marked unsafe. In particular:
GET_LOCK
IS_FREE_LOCK
IS_USED_LOCK
MASTER_POS_WAIT
RELEASE_LOCK
SLEEP
SYSDATE
VERSION
Fix: Mark these functions unsafe.
mysql-test/extra/rpl_tests/rpl_stm_000001.test:
- The test does not work in mixed mode any more, since it tries to
simulate an error in the sql thread in a query that uses get_lock.
Since get_lock now causes the query to be logged in row format,
the error didn't happen. Hence, we now force statement mode.
- Warnings must be disabled when the unsafe query is issued.
- Replaced some save_master_pos+connection slave+sync_with_master
by sync_slave_with_master.
mysql-test/suite/binlog/r/binlog_stm_mix_innodb_myisam.result:
updated result file
mysql-test/suite/binlog/r/binlog_stm_row.result:
updated result file
mysql-test/suite/binlog/r/binlog_unsafe.result:
updated result file
mysql-test/suite/binlog/t/binlog_killed.test:
binlog_killed only works in statement format now, since
it switches to row mode in mixed mode.
mysql-test/suite/binlog/t/binlog_stm_mix_innodb_myisam.test:
suppress warnings for unsafe statements
mysql-test/suite/binlog/t/binlog_stm_row.test:
- Suppress warnings in test that causes warnings.
- The test sets binlog format explicitly, so no need to execute it
twice.
mysql-test/suite/binlog/t/binlog_unsafe.test:
Added test for all unsafe system functions. This test also includes
system functions that were unsafe prior to BUG#47995.
mysql-test/suite/rpl/r/rpl_err_ignoredtable.result:
updated result file
mysql-test/suite/rpl/r/rpl_get_lock.result:
updated result file
mysql-test/suite/rpl/r/rpl_nondeterministic_functions.result:
new result file
mysql-test/suite/rpl/r/rpl_stm_000001.result:
updated result file
mysql-test/suite/rpl/r/rpl_trigger.result:
updated result file
mysql-test/suite/rpl/t/rpl_err_ignoredtable.test:
- suppress warnings for unsafe statement
- replaced save_master_pos+connection slave+sync_with_master
with sync_slave_with_master
mysql-test/suite/rpl/t/rpl_get_lock.test:
update test case that causes new warnings
mysql-test/suite/rpl/t/rpl_nondeterministic_functions.test:
Added new test case for nondeterministic functions.
mysql-test/suite/rpl/t/rpl_trigger.test:
update test case that causes new warnings
sql/item_create.cc:
Marked some system functions unsafe.
sql/item_strfunc.cc:
Clarified comment related to this bug.
sql/sql_yacc.yy:
Marked sysdate unsafe.
The 'rpl_get_master_version_and_clock' test verifies if the slave I/O
thread tries to reconnect to master when it tries to get the values of
the UNIX_TIMESTAMP, SERVER_ID from master under network disconnection.
So the master server is restarted for making the transient network
disconnection. Restarting master server can bring two problems as following:
1. The time out error is encountered sporadically. The slave I/O thread tries
to reconnect master ten times, which is set in my.cnf. So in the test
framework sporadically the slave I/O thread really stoped when it can't
reconnect to master in the ten times successfully before the master starts,
then the time out error will be encountered while waiting for the slave to
start.
2. These warnings and errors are produced in server log file when
the slave I/O thread tries to get the values of the UNIX_TIMESTAMP,
SERVER_ID from master under the transient network disconnection.
To fix problem 1, increase the master retry count to sixty times,
so that the slave I/O thread has enough time to reconnect master
successfully.
To fix problem 2, suppress these warnings and errors by mtr suppression,
because they are expected.
mysql-test/suite/rpl/t/rpl_get_master_version_and_clock-slave.opt:
Added the *.opt file for increasing master retry count to
sixty times.
mysql-test/suite/rpl/t/rpl_get_master_version_and_clock.test:
Added mtr suppression for suppressing warnings and errors
in server log file.
binlog, replication aborts
In SBR or MBR, the schema name is not being written to the binlog
when executing a LOAD DATA statement. This becomes a problem when
the current database (lets call it db1) is different from the
table's schema (lets call it db2). For instance, take the
following statements:
use db1;
load data local infile 'infile.txt' into table db2.t
Should this statement be logged without t's schema (db2), when
replaying it, one can get db1.t populated instead of db2.t (if
db1.t exists). On the other hand, if there is no db1.t at all,
replication will stop.
We fix this by always logging the table (in load file) with fully
qualified name when its schema is different from the current
database or when no default database was selected.
Backporting BUG#43789 to mysql-5.1-bugteam
The replication was generating corrupted data, warning messages on Valgrind
and aborting on debug mode while replicating a "null" to "not null" field.
Specifically the unpack_row routine, was considering the slave's table
definition and trying to retrieve a field value, where there was nothing to be
retrieved, ignoring the fact that the value was defined as "null" by the master.
To fix the problem, we proceed as follows:
1 - If it is not STRICT sql_mode, implicit default values are used, regardless
if it is multi-row or single-row statement.
2 - However, if it is STRICT mode, then a we do what follows:
2.1 If it is a transactional engine, we do a rollback on the first NULL that is
to be set into a NOT NULL column and return an error.
2.2 If it is a non-transactional engine and it is the first row to be inserted
with multi-row, we also return the error. Otherwise, we proceed with the
execution, use implicit default values and print out warning messages.
Unfortunately, the current patch cannot mimic the behavior showed by the master
for updates on multi-tables and multi-row inserts. This happens because such
statements are unfolded in different row events. For instance, considering the
following updates and strict mode:
(master)
create table t1 (a int);
create table t2 (a int not null);
insert into t1 values (1);
insert into t2 values (2);
update t1, t2 SET t1.a=10, t2.a=NULL;
t1 would have (10) and t2 would have (0) as this would be handled as a
multi-row update. On the other hand, if we had the following updates:
(master)
create table t1 (a int);
create table t2 (a int);
(slave)
create table t1 (a int);
create table t2 (a int not null);
(master)
insert into t1 values (1);
insert into t2 values (2);
update t1, t2 SET t1.a=10, t2.a=NULL;
On the master t1 would have (10) and t2 would have (NULL). On
the slave, t1 would have (10) but the update on t1 would fail.
Backporting BUG#38173 to mysql-5.1-bugteam
The reason of the bug was incompatibile with the master side behaviour.
INSERT query on the master is allowed to insert into a table without specifying
values of DEFAULT-less fields if sql_mode is not strict.
Fixed with checking sql_mode by the sql thread to decide how to react.
Non-strict sql_mode should allow Write_rows event to complete.
todo: warnings can be shown via show slave status, still this is a
separate rather general issue how to show warnings for the slave threads.
Let
- T be a transactional table and N non-transactional table.
- B be begin, C commit and R rollback.
- N be a statement that accesses and changes only N-tables.
- T be a statement that accesses and changes only T-tables.
In RBR, changes to N-tables that happen early in a transaction are not immediately flushed
upon committing a statement. This behavior may, however, break consistency in the presence
of concurrency since changes done to N-tables become immediately visible to other
connections. To fix this problem, we do the following:
. B N N T C would log - B N C B N C B T C.
. B N N T R would log - B N C B N C B T R.
Note that we are not preserving history from the master as we are introducing a commit that
never happened. However, this seems to be more acceptable than the possibility of breaking
consistency in the presence of concurrency.
