Adding my_global.h first in all files using
NO_EMBEDDED_ACCESS_CHECKS.
Correcting a merge problem resulting from a changed definition
of check_some_access compared to the original patches.
This patch:
- Moves all definitions from the mysql_priv.h file into
header files for the component where the variable is
defined
- Creates header files if the component lacks one
- Eliminates all include directives from mysql_priv.h
- Eliminates all circular include cycles
- Rename time.cc to sql_time.cc
- Rename mysql_priv.h to sql_priv.h
The problem is introduced by WL#4435 "Support OUT-parameters in
prepared statements".
When a statement that has out parameters was reprepared,
the reprepare request error was ignored, and an
attempt to send out parameters to the client was made.
Since the out parameter list was not initialized in case
of an error, this attempt led to a crash.
Don't try to send out parameters to the client
if an error occurred in statement execution.
Add a wait-for graph based deadlock detector to the
MDL subsystem.
Fixes bug #46272 "MySQL 5.4.4, new MDL: unnecessary deadlock" and
bug #37346 "innodb does not detect deadlock between update and
alter table".
The first bug manifested itself as an unwarranted abort of a
transaction with ER_LOCK_DEADLOCK error by a concurrent ALTER
statement, when this transaction tried to repeat use of a
table, which it has already used in a similar fashion before
ALTER started.
The second bug showed up as a deadlock between table-level
locks and InnoDB row locks, which was "detected" only after
innodb_lock_wait_timeout timeout.
A transaction would start using the table and modify a few
rows.
Then ALTER TABLE would come in, and start copying rows
into a temporary table. Eventually it would stumble on
the modified records and get blocked on a row lock.
The first transaction would try to do more updates, and get
blocked on thr_lock.c lock.
This situation of circular wait would only get resolved
by a timeout.
Both these bugs stemmed from inadequate solutions to the
problem of deadlocks occurring between different
locking subsystems.
In the first case we tried to avoid deadlocks between metadata
locking and table-level locking subsystems, when upgrading shared
metadata lock to exclusive one.
Transactions holding the shared lock on the table and waiting for
some table-level lock used to be aborted too aggressively.
We also allowed ALTER TABLE to start in presence of transactions
that modify the subject table. ALTER TABLE acquires
TL_WRITE_ALLOW_READ lock at start, and that block all writes
against the table (naturally, we don't want any writes to be lost
when switching the old and the new table). TL_WRITE_ALLOW_READ
lock, in turn, would block the started transaction on thr_lock.c
lock, should they do more updates. This, again, lead to the need
to abort such transactions.
The second bug occurred simply because we didn't have any
mechanism to detect deadlocks between the table-level locks
in thr_lock.c and row-level locks in InnoDB, other than
innodb_lock_wait_timeout.
This patch solves both these problems by moving lock conflicts
which are causing these deadlocks into the metadata locking
subsystem, thus making it possible to avoid or detect such
deadlocks inside MDL.
To do this we introduce new type-of-operation-aware metadata
locks, which allow MDL subsystem to know not only the fact that
transaction has used or is going to use some object but also what
kind of operation it has carried out or going to carry out on the
object.
This, along with the addition of a special kind of upgradable
metadata lock, allows ALTER TABLE to wait until all
transactions which has updated the table to go away.
This solves the second issue.
Another special type of upgradable metadata lock is acquired
by LOCK TABLE WRITE. This second lock type allows to solve the
first issue, since abortion of table-level locks in event of
DDL under LOCK TABLES becomes also unnecessary.
Below follows the list of incompatible changes introduced by
this patch:
- From now on, ALTER TABLE and CREATE/DROP TRIGGER SQL (i.e. those
statements that acquire TL_WRITE_ALLOW_READ lock)
wait for all transactions which has *updated* the table to
complete.
- From now on, LOCK TABLES ... WRITE, REPAIR/OPTIMIZE TABLE
(i.e. all statements which acquire TL_WRITE table-level lock) wait
for all transaction which *updated or read* from the table
to complete.
As a consequence, innodb_table_locks=0 option no longer applies
to LOCK TABLES ... WRITE.
- DROP DATABASE, DROP TABLE, RENAME TABLE no longer abort
statements or transactions which use tables being dropped or
renamed, and instead wait for these transactions to complete.
- Since LOCK TABLES WRITE now takes a special metadata lock,
not compatible with with reads or writes against the subject table
and transaction-wide, thr_lock.c deadlock avoidance algorithm
that used to ensure absence of deadlocks between LOCK TABLES
WRITE and other statements is no longer sufficient, even for
MyISAM. The wait-for graph based deadlock detector of MDL
subsystem may sometimes be necessary and is involved. This may
lead to ER_LOCK_DEADLOCK error produced for multi-statement
transactions even if these only use MyISAM:
session 1: session 2:
begin;
update t1 ... lock table t2 write, t1 write;
-- gets a lock on t2, blocks on t1
update t2 ...
(ER_LOCK_DEADLOCK)
- Finally, support of LOW_PRIORITY option for LOCK TABLES ... WRITE
was abandoned.
LOCK TABLE ... LOW_PRIORITY WRITE from now on has the same
priority as the usual LOCK TABLE ... WRITE.
SELECT HIGH PRIORITY no longer trumps LOCK TABLE ... WRITE in
the wait queue.
- We do not take upgradable metadata locks on implicitly
locked tables. So if one has, say, a view v1 that uses
table t1, and issues:
LOCK TABLE v1 WRITE;
FLUSH TABLE t1; -- (or just 'FLUSH TABLES'),
an error is produced.
In order to be able to perform DDL on a table under LOCK TABLES,
the table must be locked explicitly in the LOCK TABLES list.
'CREATE TABLE IF NOT EXISTS ... SELECT' statement were causing 'CREATE
TEMPORARY TABLE ...' to be written to the binary log in row-based
mode (a.k.a. RBR), when there was a temporary table with the same name.
Because the 'CREATE TABLE ... SELECT' statement was executed as
'INSERT ... SELECT' into the temporary table. Since in RBR mode no
other statements related to temporary tables are written into binary log,
this sometimes broke replication.
This patch changes behavior of 'CREATE TABLE [IF NOT EXISTS] ... SELECT ...'.
it ignores existence of temporary table with the
same name as table being created and is interpreted
as attempt to create/insert into base table. This makes behavior of
'CREATE TABLE [IF NOT EXISTS] ... SELECT' consistent with
how ordinary 'CREATE TABLE' and 'CREATE TABLE ... LIKE' behave.
Bug#45523 "Objects of class base_ilist should not be copyable".
Suppress the compiler-generated public copy constructor
and assignment operator of class base_ilist; instead, implement
move_elements_to() function which transfers ownership of elements
from one list to another.
3655 Jon Olav Hauglid 2009-10-19
Bug #30977 Concurrent statement using stored function and DROP FUNCTION
breaks SBR
Bug #48246 assert in close_thread_table
Implement a fix for:
Bug #41804 purge stored procedure cache causes mysterious hang for many
minutes
Bug #49972 Crash in prepared statements
The problem was that concurrent execution of DML statements that
use stored functions and DDL statements that drop/modify the same
function might result in incorrect binary log in statement (and
mixed) mode and therefore break replication.
This patch fixes the problem by introducing metadata locking for
stored procedures and functions. This is similar to what is done
in Bug#25144 for views. Procedures and functions now are
locked using metadata locks until the transaction is either
committed or rolled back. This prevents other statements from
modifying the procedure/function while it is being executed. This
provides commit ordering - guaranteeing serializability across
multiple transactions and thus fixes the reported binlog problem.
Note that we do not take locks for top-level CALLs. This means
that procedures called directly are not protected from changes by
simultaneous DDL operations so they are executed at the state they
had at the time of the CALL. By not taking locks for top-level
CALLs, we still allow transactions to be started inside
procedures.
This patch also changes stored procedure cache invalidation.
Upon a change of cache version, we no longer invalidate the entire
cache, but only those routines which we use, only when a statement
is executed that uses them.
This patch also changes the logic of prepared statement validation.
A stored procedure used by a prepared statement is now validated
only once a metadata lock has been acquired. A version mismatch
causes a flush of the obsolete routine from the cache and
statement reprepare.
Incompatible changes:
1) ER_LOCK_DEADLOCK is reported for a transaction trying to access
a procedure/function that is locked by a DDL operation in
another connection.
2) Procedure/function DDL operations are now prohibited in LOCK
TABLES mode as exclusive locks must be taken all at once and
LOCK TABLES provides no way to specifiy procedures/functions to
be locked.
Test cases have been added to sp-lock.test and rpl_sp.test.
Work on this bug has very much been a team effort and this patch
includes and is based on contributions from Davi Arnaut, Dmitry
Lenev, Magne Mæhre and Konstantin Osipov.
"HANDLER statements within a transaction might lead to deadlocks".
Introduce a notion of a sentinel to MDL_context. A sentinel
is a ticket that separates all tickets in the context into two
groups: before and after it. Currently we can have (and need) only
one designated sentinel -- it separates all locks taken by LOCK
TABLE or HANDLER statement, which must survive COMMIT and ROLLBACK
and all other locks, which must be released at COMMIT or ROLLBACK.
The tricky part is maintaining the sentinel up to date when
someone release its corresponding ticket. This can happen, e.g.
if someone issues DROP TABLE under LOCK TABLES (generally,
see all calls to release_all_locks_for_name()).
MDL_context::release_ticket() is modified to take care of it.
******
A fix and a test case for Bug#46224 "HANDLER statements within a
transaction might lead to deadlocks".
An attempt to mix HANDLER SQL statements, which are transaction-
agnostic, an open multi-statement transaction,
and DDL against the involved tables (in a concurrent connection)
could lead to a deadlock. The deadlock would occur when
HANDLER OPEN or HANDLER READ would have to wait on a conflicting
metadata lock. If the connection that issued HANDLER statement
also had other metadata locks (say, acquired in scope of a
transaction), a classical deadlock situation of mutual wait
could occur.
Incompatible change: entering LOCK TABLES mode automatically
closes all open HANDLERs in the current connection.
Incompatible change: previously an attempt to wait on a lock
in a connection that has an open HANDLER statement could wait
indefinitely/deadlock. After this patch, an error ER_LOCK_DEADLOCK
is produced.
The idea of the fix is to merge thd->handler_mdl_context
with the main mdl_context of the connection, used for transactional
locks. This makes deadlock detection possible, since all waits
with locks are "visible" and available to analysis in a single
MDL context of the connection.
Since HANDLER locks and transactional locks have a different life
cycle -- HANDLERs are explicitly open and closed, and so
are HANDLER locks, explicitly acquired and released, whereas
transactional locks "accumulate" till the end of a transaction
and are released only with COMMIT, ROLLBACK and ROLLBACK TO SAVEPOINT,
a concept of "sentinel" was introduced to MDL_context.
All locks, HANDLER and others, reside in the same linked list.
However, a selected element of the list separates locks with
different life cycle. HANDLER locks always reside at the
end of the list, after the sentinel. Transactional locks are
prepended to the beginning of the list, before the sentinel.
Thus, ROLLBACK, COMMIT or ROLLBACK TO SAVEPOINT, only
release those locks that reside before the sentinel. HANDLER locks
must be released explicitly as part of HANDLER CLOSE statement,
or an implicit close.
The same approach with sentinel
is also employed for LOCK TABLES locks. Since HANDLER and LOCK TABLES
statement has never worked together, the implementation is
made simple and only maintains one sentinel, which is used either
for HANDLER locks, or for LOCK TABLES locks.
Bug#16565 mysqld --help --verbose does not order variablesBug#20413 sql_slave_skip_counter is not shown in show variables
Bug#20415 Output of mysqld --help --verbose is incomplete
Bug#25430 variable not found in SELECT @@global.ft_max_word_len;
Bug#32902 plugin variables don't know their names
Bug#34599 MySQLD Option and Variable Reference need to be consistent in formatting!
Bug#34829 No default value for variable and setting default does not raise error
Bug#34834 ? Is accepted as a valid sql mode
Bug#34878 Few variables have default value according to documentation but error occurs
Bug#34883 ft_boolean_syntax cant be assigned from user variable to global var.
Bug#37187 `INFORMATION_SCHEMA`.`GLOBAL_VARIABLES`: inconsistent status
Bug#40988 log_output_basic.test succeeded though syntactically false.
Bug#41010 enum-style command-line options are not honoured (maria.maria-recover fails)
Bug#42103 Setting key_buffer_size to a negative value may lead to very large allocations
Bug#44691 Some plugins configured as MYSQL_PLUGIN_MANDATORY in can be disabled
Bug#44797 plugins w/o command-line options have no disabling option in --help
Bug#46314 string system variables don't support expressions
Bug#46470 sys_vars.max_binlog_cache_size_basic_32 is broken
Bug#46586 When using the plugin interface the type "set" for options caused a crash.
Bug#47212 Crash in DBUG_PRINT in mysqltest.cc when trying to print octal number
Bug#48758 mysqltest crashes on sys_vars.collation_server_basic in gcov builds
Bug#49417 some complaints about mysqld --help --verbose output
Bug#49540 DEFAULT value of binlog_format isn't the default value
Bug#49640 ambiguous option '--skip-skip-myisam' (double skip prefix)
Bug#49644 init_connect and \0
Bug#49645 init_slave and multi-byte characters
Bug#49646 mysql --show-warnings crashes when server dies
Bug#42546 Backup: RESTORE fails, thinking it finds an existing table
The problem occured when a MDL locking conflict happened for a non-existent
table between a CREATE and a INSERT statement. The code for CREATE
interpreted this lock conflict to mean that the table existed,
which meant that the statement failed when it should not have.
The problem could occur for CREATE TABLE, CREATE TABLE LIKE and
ALTER TABLE RENAME.
This patch fixes the problem for CREATE TABLE and CREATE TABLE LIKE.
It is based on code backported from the mysql-6.1-fk tree written
by Dmitry Lenev. CREATE now uses normal open_and_lock_tables() code
to acquire exclusive locks. This means that for the test case in the bug
description, CREATE will wait until INSERT completes so that it can
get the exclusive lock. This resolves the reported bug.
The patch also prohibits CREATE TABLE and CREATE TABLE LIKE under
LOCK TABLES. Note that this is an incompatible change and must
be reflected in the documentation. Affected test cases have been
updated.
mdl_sync.test contains tests for CREATE TABLE and CREATE TABLE LIKE.
Fixing the issue for ALTER TABLE RENAME is beyond the scope of this
patch. ALTER TABLE cannot be prohibited from working under LOCK TABLES
as this could seriously impact customers and a proper fix would require
a significant rewrite.
2617.31.12, 2617.31.15, 2617.31.15, 2617.31.16, 2617.43.1
- initial changeset that introduced the fix for
Bug#989 and follow up fixes for all test suite failures
introduced in the initial changeset.
------------------------------------------------------------
revno: 2617.31.1
committer: Davi Arnaut <Davi.Arnaut@Sun.COM>
branch nick: 4284-6.0
timestamp: Fri 2009-03-06 19:17:00 -0300
message:
Bug#989: If DROP TABLE while there's an active transaction, wrong binlog order
WL#4284: Transactional DDL locking
Currently the MySQL server does not keep metadata locks on
schema objects for the duration of a transaction, thus failing
to guarantee the integrity of the schema objects being used
during the transaction and to protect then from concurrent
DDL operations. This also poses a problem for replication as
a DDL operation might be replicated even thought there are
active transactions using the object being modified.
The solution is to defer the release of metadata locks until
a active transaction is either committed or rolled back. This
prevents other statements from modifying the table for the
entire duration of the transaction. This provides commitment
ordering for guaranteeing serializability across multiple
transactions.
- Incompatible change:
If MySQL's metadata locking system encounters a lock conflict,
the usual schema is to use the try and back-off technique to
avoid deadlocks -- this schema consists in releasing all locks
and trying to acquire them all in one go.
But in a transactional context this algorithm can't be utilized
as its not possible to release locks acquired during the course
of the transaction without breaking the transaction commitments.
To avoid deadlocks in this case, the ER_LOCK_DEADLOCK will be
returned if a lock conflict is encountered during a transaction.
Let's consider an example:
A transaction has two statements that modify table t1, then table
t2, and then commits. The first statement of the transaction will
acquire a shared metadata lock on table t1, and it will be kept
utill COMMIT to ensure serializability.
At the moment when the second statement attempts to acquire a
shared metadata lock on t2, a concurrent ALTER or DROP statement
might have locked t2 exclusively. The prescription of the current
locking protocol is that the acquirer of the shared lock backs off
-- gives up all his current locks and retries. This implies that
the entire multi-statement transaction has to be rolled back.
- Incompatible change:
FLUSH commands such as FLUSH PRIVILEGES and FLUSH TABLES WITH READ
LOCK won't cause locked tables to be implicitly unlocked anymore.
------------------------------------------------------------
revno: 2630.4.16
committer: Dmitry Lenev <dlenev@mysql.com>
branch nick: mysql-6.0-3726-w
timestamp: Thu 2008-05-29 09:45:02 +0400
message:
WL#3726 "DDL locking for all metadata objects".
After review changes in progress.
Tweaked some comments and did some renames to
avoid ambiguites.
Backport of:
------------------------------------------------------------
revno: 2630.4.1
committer: Dmitry Lenev <dlenev@mysql.com>
branch nick: mysql-6.0-3726-w
timestamp: Fri 2008-05-23 17:54:03 +0400
message:
WL#3726 "DDL locking for all metadata objects".
After review fixes in progress.
------------------------------------------------------------
This is the first patch in series. It transforms the metadata
locking subsystem to use a dedicated module (mdl.h,cc). No
significant changes in the locking protocol.
The import passes the test suite with the exception of
deprecated/removed 6.0 features, and MERGE tables. The latter
are subject to a fix by WL#4144.
Unfortunately, the original changeset comments got lost in a merge,
thus this import has its own (largely insufficient) comments.
This patch fixes Bug#25144 "replication / binlog with view breaks".
Warning: this patch introduces an incompatible change:
Under LOCK TABLES, it's no longer possible to FLUSH a table that
was not locked for WRITE.
Under LOCK TABLES, it's no longer possible to DROP a table or
VIEW that was not locked for WRITE.
******
Backport of:
------------------------------------------------------------
revno: 2630.4.2
committer: Dmitry Lenev <dlenev@mysql.com>
branch nick: mysql-6.0-3726-w
timestamp: Sat 2008-05-24 14:03:45 +0400
message:
WL#3726 "DDL locking for all metadata objects".
After review fixes in progress.
******
Backport of:
------------------------------------------------------------
revno: 2630.4.3
committer: Dmitry Lenev <dlenev@mysql.com>
branch nick: mysql-6.0-3726-w
timestamp: Sat 2008-05-24 14:08:51 +0400
message:
WL#3726 "DDL locking for all metadata objects"
Fixed failing Windows builds by adding mdl.cc to the lists
of files needed to build server/libmysqld on Windows.
******
Backport of:
------------------------------------------------------------
revno: 2630.4.4
committer: Dmitry Lenev <dlenev@mysql.com>
branch nick: mysql-6.0-3726-w
timestamp: Sat 2008-05-24 21:57:58 +0400
message:
WL#3726 "DDL locking for all metadata objects".
Fix for assert failures in kill.test which occured when one
tried to kill ALTER TABLE statement on merge table while it
was waiting in wait_while_table_is_used() for other connections
to close this table.
These assert failures stemmed from the fact that cleanup code
in this case assumed that temporary table representing new
version of table was open with adding to THD::temporary_tables
list while code which were opening this temporary table wasn't
always fulfilling this.
This patch changes code that opens new version of table to
always do this linking in. It also streamlines cleanup process
for cases when error occurs while we have new version of table
open.
******
WL#3726 "DDL locking for all metadata objects"
Add libmysqld/mdl.cc to .bzrignore.
******
Backport of:
------------------------------------------------------------
revno: 2630.4.6
committer: Dmitry Lenev <dlenev@mysql.com>
branch nick: mysql-6.0-3726-w
timestamp: Sun 2008-05-25 00:33:22 +0400
message:
WL#3726 "DDL locking for all metadata objects".
Addition to the fix of assert failures in kill.test caused by
changes for this worklog.
Make sure we close the new table only once.
-------------------------------------------------------------
revno: 2877
committer: Davi Arnaut <Davi.Arnaut@Sun.COM>
branch nick: 35164-6.0
timestamp: Wed 2008-10-15 19:53:18 -0300
message:
Bug#35164: Large number of invalid pthread_attr_setschedparam calls
Bug#37536: Thread scheduling causes performance degradation at low thread count
Bug#12702: Long queries take 100% of CPU and freeze other applications under Windows
The problem is that although having threads with different priorities
yields marginal improvements [1] in some platforms [2], relying on some
statically defined priorities (QUERY_PRIOR and WAIT_PRIOR) to play well
(or to work at all) with different scheduling practices and disciplines
is, at best, a shot in the dark as the meaning of priority values may
change depending on the scheduling policy set for the process.
Another problem is that increasing priorities can hurt other concurrent
(running on the same hardware) applications (such as AMP) by causing
starvation problems as MySQL threads will successively preempt lower
priority processes. This can be evidenced by Bug#12702.
The solution is to not change the threads priorities and rely on the
system scheduler to perform its job. This also enables a system admin
to increase or decrease the scheduling priority of the MySQL process,
if intended.
Furthermore, the internal wrappers and code for changing the priority
of threads is being removed as they are now unused and ancient.
1. Due to unintentional side effects. On Solaris this could artificially
help benchmarks as calling the priority changing syscall millions of
times is more beneficial than the actual setting of the priority.
2. Where it actually works. It has never worked on Linux as the default
scheduling policy SCHED_OTHER only accepts the static priority 0.
2630.39.1, 2630.28.29, 2630.34.3, 2630.34.2, 2630.34.1, 2630.29.29,
2630.29.28, 2630.31.1, 2630.28.13, 2630.28.10, 2617.23.14 and
some other minor revisions.
This patch implements:
WL#4264 "Backup: Stabilize Service Interface" -- all the
server prerequisites except si_objects.{h,cc} themselves (they can
be just copied over, when needed).
WL#4435: Support OUT-parameters in prepared statements.
(and all issues in the initial patches for these two
tasks, that were discovered in pushbuild and during testing).
Bug#39519: mysql_stmt_close() should flush all data
associated with the statement.
After execution of a prepared statement, send OUT parameters of the invoked
stored procedure, if any, to the client.
When using the binary protocol, send the parameters in an additional result
set over the wire. When using the text protocol, assign out parameters to
the user variables from the CALL(@var1, @var2, ...) specification.
The following refactoring has been made:
- Protocol::send_fields() was renamed to Protocol::send_result_set_metadata();
- A new Protocol::send_result_set_row() was introduced to incapsulate
common functionality for sending row data.
- Signature of Protocol::prepare_for_send() was changed: this operation
does not need a list of items, the number of items is fully sufficient.
The following backward incompatible changes have been made:
- CLIENT_MULTI_RESULTS is now enabled by default in the client;
- CLIENT_PS_MULTI_RESUTLS is now enabled by default in the client.
UPDATE + VIEW + SP + MERGE + ALTER
When cleaning up the stored procedure's internal
structures the flag to ignore the errors for
INSERT/UPDATE IGNORE was not cleaned up.
As a result error ignoring was on during name
resolution. And this is an abnormal situation : the
SELECT_LEX flag can be on only during query execution.
Fixed by correctly cleaning up the SELECT_LEX flag
when reusing the SELECT_LEX in a second execution.
The flag EXTRA_ACL is used in conjugation with our access checks, yet it is
not clear what impact this flag has.
This is a code clean up which replaces use of EXTRA_ACL with an explicit
function parameter.
The patch also fixes privilege checks for:
- SHOW CREATE TABLE: The new privilege requirement is any privilege on
the table-level.
- CHECKSUM TABLE: Requires SELECT on the table level.
- SHOW CREATE VIEW: Requires SHOW_VIEW and SELECT on the table level
(just as the manual claims)
- SHOW INDEX: Requires any privilege on any column combination.
Implemented the server infrastructure for the fix:
1. Added a function LEX_STRING *thd_query_string(THD) to return
a LEX_STRING structure instead of char *.
This is the function that must be called in innodb instead of
thd_query()
2. Did some encapsulation in THD : aggregated thd_query and
thd_query_length into a LEX_STRING and made accessor and mutator
methods for easy code updating.
3. Updated the server code to use the new methods where applicable.
"have_profiling"
1) Renamed have_community_features server system variable to
have_profiling.
2) Removed eable-community-features configure option and
ENABLE_COMMUNITY_FEATURES macro.
3) Removed COMMUNITY_SERVER macro and replaced its usage by
ENABLED_PROFILING.
Only --enable-profiling is now needed to enable profiling.
It was the only existing "community feature", so there was
no need for both configure options.
Using --enable-community-features will give a warning message
since it no longer exists.
bzr branch mysql-5.1-performance-version mysql-trunk # Summit
cd mysql-trunk
bzr merge mysql-5.1-innodb_plugin # which is 5.1 + Innodb plugin
bzr rm innobase # remove the builtin
Next step: build, test fixes.
failed"
Do not assume that SQL prepared statements always run in text protocol.
When invoked from a stored procedure, which is itself invoked
by means of prepared CALL statement, the protocol may be binary.
Juggle with the protocol only when we want to change it
to binary in COM_STMT_EXECUTE, COM_STMT_PREPARE.
This is a backport from 5.4/6.0, where the bug was fixed
as part of WL#4264 "Backup: Stabilize Service Interface"
with gcc 4.3.2
Compiling MySQL with gcc 4.3.2 and later produces a number of
warnings, many of which are new with the recent compiler
versions.
This bug will be resolved in more than one patch to limit the
size of changesets. This is the second patch, fixing more
of the warnings.
with gcc 4.3.2
Compiling MySQL with gcc 4.3.2 and later produces a number of
warnings, many of which are new with the recent compiler
versions.
This bug will be resolved in more than one patch to limit the
size of changesets. This is the second patch, fixing more
of the warnings.
- Remove bothersome warning messages. This change focuses on the warnings
that are covered by the ignore file: support-files/compiler_warnings.supp.
- Strings are guaranteed to be max uint in length
- Remove bothersome warning messages. This change focuses on the warnings
that are covered by the ignore file: support-files/compiler_warnings.supp.
- Strings are guaranteed to be max uint in length
