innodb/buf_LRU_get_free_block
Add debug instrumentation to produce error message about
no free pages. Print error message only once and do not
enable innodb monitor.
xtradb/buf_LRU_get_free_block
Add debug instrumentation to produce error message about
no free pages. Print error message only once and do not
enable innodb monitor. Remove code that does not seem to
be used.
innodb-lru-force-no-free-page.test
New test case to force produce desired error message.
dict_foreign_find_index(): Ignore incompletely created indexes.
After a failed ADD UNIQUE INDEX, an incompletely created index
could be left behind until the next ALTER TABLE statement.
There is a race condition on a test. con1 is the older transaction
as it query started wait first. Test continues so that con1 gets
lock wait timeout first. There is possibility that default connection
gets lock timeout also or as con1 is rolled back it gets the locks
it waited and does the update. Fixed by removing query outputs as
they could vary and accepting success from default connection
query.
This bug affects both writing and reading encrypted redo log in
MariaDB 10.1, starting from version 10.1.3 which added support for
innodb_encrypt_log. That is, InnoDB crash recovery and Mariabackup
will sometimes fail when innodb_encrypt_log is used.
MariaDB 10.2 or Mariabackup 10.2 or later versions are not affected.
log_block_get_start_lsn(): Remove. This function would cause trouble if
a log segment that is being read is crossing a 32-bit boundary of the LSN,
because this function does not allow the most significant 32 bits of the
LSN to change.
log_blocks_crypt(), log_encrypt_before_write(), log_decrypt_after_read():
Add the parameter "lsn" for the start LSN of the block.
log_blocks_encrypt(): Remove (unused function).
debug_key_management
encrypt_and_grep
innodb_encryption
If real table count is different from what is expected by the test, it
just hangs on waiting to fulfill hardcoded number. And then exits with
**failed** after 10 minutes of wait: quite unfriendly and hard to
figure out what's going on.
Fix and enable some of the tests; some remain disabled.
The tests innodb_gis.rtree_old and innodb_gis.row_format
duplicated some versions of the test main.gis-rtree.
Instead of duplicating, source that test, in a new test
innodb_gis.innodb_gis_rtree.
Introduce innodb_row_format.combinations. Due to this,
ROW_FORMAT=COMPRESSED will not be covered in some tests
where it is covered in MySQL 5.7.
The function rtr_update_mbr_field_in_place() is generating
MLOG_REC_UPDATE_IN_PLACE or MLOG_COMP_REC_UPDATE_IN_PLACE records
on non-leaf pages, even though MLOG_WRITE_STRING would perfectly
suffice for updating a fixed-length data field.
btr_cur_parse_update_in_place(): If flags==7, the record may be
from rtr_update_mbr_field_in_place(), and we must check if the
page is a leaf page. Otherwise, assume that it is.
btr_cur_update_in_place(): Assert that the page is a leaf page.
Other things, mainly to get
create_mysqld_error_find_printf_error tool to work:
- Added protection to not include mysqld_error.h twice
- Include "unireg.h" instead of "mysqld_error.h" in server
- Added protection if ER_XX messages are already defined
- Removed wrong calls to my_error(ER_OUTOFMEMORY) as
my_malloc() and my_alloc will do this automatically
- Added missing %s to ER_DUP_QUERY_NAME
- Removed old and wrong calls to my_strerror() when using
MY_ERROR_ON_RENAME (wrong merge)
- Fixed deadlock error message from Galera. Before the extra
information given to ER_LOCK_DEADLOCK was missing because
ER_LOCK_DEADLOCK doesn't provide any extra information.
I kept #ifdef mysqld_error_find_printf_error_used in sql_acl.h
to make it easy to do this kind of check again in the future
debug_key_management
encrypt_and_grep
innodb_encryption
If real table count is different from what is expected by the test, it
just hangs on waiting to fulfill hardcoded number. And then exits with
**failed** after 10 minutes of wait: quite unfriendly and hard to
figure out what's going on.
While the redo log format was changed in MariaDB 10.3.2 and 10.3.3
due to MDEV-12288 and MDEV-11369, it should be technically possible
to upgrade from a crashed MariaDB 10.2 instance.
On a related note, it should be possible for Mariabackup 10.3
to create a backup from a running MariaDB Server 10.2.
mlog_id_t: Put back the 10.2 specific redo log record types
MLOG_UNDO_INSERT, MLOG_UNDO_ERASE_END, MLOG_UNDO_INIT,
MLOG_UNDO_HDR_REUSE.
trx_undo_parse_add_undo_rec(): Parse or apply MLOG_UNDO_INSERT.
trx_undo_erase_page_end(): Apply MLOG_UNDO_ERASE_END.
trx_undo_parse_page_init(): Parse or apply MLOG_UNDO_INIT.
trx_undo_parse_page_header_reuse(): Parse or apply MLOG_UNDO_HDR_REUSE.
recv_log_recover_10_2(): Remove. Always parse the redo log from 10.2.
recv_find_max_checkpoint(), recv_recovery_from_checkpoint_start():
Always parse the redo log from MariaDB 10.2.
recv_parse_or_apply_log_rec_body(): Parse or apply
MLOG_UNDO_INSERT, MLOG_UNDO_ERASE_END, MLOG_UNDO_INIT.
srv_prepare_to_delete_redo_log_files(),
innobase_start_or_create_for_mysql(): Upgrade from a previous (supported)
redo log format.
trx_undo_page_report_modify(): For SPATIAL INDEX, keep logging
updated off-page columns twice, so that
the minimum bounding rectangle (MBR) will be logged.
Avoiding the redundant logging would require larger changes
to the undo log format.
row_build_index_entry_low(): Handle SPATIAL_UNKNOWN more robustly,
by refusing to purge the record from the spatial index.
We can get this code when processing old undo log from 10.2.10 or
10.2.11 (the releases affected by MDEV-14799, which was a regression
from MDEV-14051).
The InnoDB background tasks can modify tables while LOCK TABLES...WRITE
is in effect. The purge of InnoDB history always worked like this in
MariaDB, but in MySQL 5.7 it sometimes yields to LOCK TABLES.
Also, make gcol.innodb_virtual_index run the purge for an UPDATE
before DROP TABLE is executed.
Code in QUICK_RANGE_SELECT::init_ror_merged_scan() could theoretically
have caused crashes if this was ever called from an update or delete
This also found a bug in the vcol/range.result. file.
Main problem was that no log-event print function checked for disk
full error on the IO_CACHE.
All changes in this patch only affects mysqlbinlog, not the server!
- Changed all log-event print functions to return 1 on error
- Fixed memory usage when not using --flashback.
- Added printing of number of rows in row events. Can be disabled with
--print-row-count=0
- Print annotated rows when using mysqlbinlog --short-form
- Fixed that mysqlbinlog --debug works
- Fixed create_drop_binlog.test test failure
- Reorganized fields in PRINT_EVENT_INFO to be according to size to
optimize storage
- Don't change print_row_event_position or print_row_counts if set by user
- Remove some testing of argument to my_free is 0
- base64-output=never is now supported and works in all context
- Updated help information for --base64-output and --short-form
- print_row_count is now on by default. Reset automatically if --short-form
is used
- Removed obsolote warning for mysql 5.6.0
- More DBUG_PRINT for mysqltest.cc
- my_b_write_byte() now checks for flush failures. This fixed a memory
overrun on disk full
- my_b_printf() now returns 1 on failure, 0 on ok. This simplifies code
and no old code was using the old return value of my_b_printf().
- my_b_Write_backtick_quote() now returns 1 on failure and 0 on ok
- Fixed some error conditions in log printing that was not previously
handled.
- Slave_rows_error_report() can now handle longlong positions
- Write_on_release_cache() rewritten so that we can detect errors
on flush. Not depending on automatic release anymore.
- Changed types for Pos and End_log_pos to 64 bit in SHOW BINLOG EVENTS
- Fixed that copy_event_cache_to_string_and_reinit() works with strings
longer than 4G (Changed to use LEX_STRING instead of String)
- Restricted binlog_rows_event_max_size to UINT32_MAX-1 as String's are
anyway restricted to UINT32_MAX
- Fixed bug in rpl_binlog_state::write_to_iocache() which hide write
failures (duplicate variable name)
- Fixed bug in String::append if original string was not allocated
- Stop mysqlbinlog output at once if there is an error.
- Before printing error message, flush result file. This ensures that
the error message is printed last. (Easier to find)
* don't use Env module in tests, use $ENV{xxx} instead
* collateral changes:
** $file in the error message was unset
** $file in the other error message was unset too :)
** source file arguments are conventionally upper-cased
** abort the test (die) on error, don't just echo/exit
Problem:- Gtid are not transferred in Galera Cluster.
Solution:- We need to transfer gtid in the case on either when cluster is
slave/master in async replication. In normal Gtid replication gtid are generated on
recieving node itself and it is always on sync with other nodes. Because galera keeps
node in sync , So all nodes get same no of event groups. So the issue arises when
say galera is slave in async replication.
A
| (Async replication)
D <-> E <-> F {Galera replication}
So what should happen is that all node should apply the master gtid but this does
node happen, becuase node E, F does not recieve gtid from D in write set , So what E(or F)
does is that it applies wsrep_gtid_domain_id, D server-id , E gtid next seq no. This
generated gtid does not always work when say A has different domain id.
So In this commit, on galera node when we see that this event is recieved from master
we simply write Gtid_Log_Event in write_set and send it to other nodes.
Other changes done to get this to work:
- Added 'internal_tables' to TABLE object to list which sequence tables
is needed to use the table.
- Mark any expression using DEFAULT() with LEX->default_used.
This is needed when deciding if we should open internal sequence
tables when a table is opened (we don't need to open sequence tables
if the main table is only used with SELECT).
- Create_and_open_temporary_table() can now also open all internal
sequence tables.
- Added option MYSQL_LOCK_USE_MALLOC to mysql_lock_tables()
to force memory allocation to be used with malloc instead of
memroot.
- Added flag to MYSQL_LOCK to remember if allocation was done with
malloc or memroot (makes code simpler and safer).
- init_one_table_for_prelocking() now takes argument for what lock to
use instead of it's a routine or something else.
- Renamed prelocking placeholders to make them more understandable as
they are now used in more code.
- Changed test in check_lock_and_start_stmt() if found table has correct
locks. The old test didn't work for tables that has lock
TL_WRITE_ALLOW_WRITE, which is what sequence tables are using.
- Added VCOL_NOT_VIRTUAL option to ensure that sequence functions can't
be used with virtual columns
- More sequence tests
* rename in_subquery_conversion_threshold to in_predicate_conversion_threshold
* make it debug-only, hide from users
* change from ulong to uint - same type and range on all architectures
Sometimes, the test would fail with a result difference for
the READ UNCOMMITTED read, because the incremental backup
would finish before redo log was written for all the rows
that were inserted in the second batch.
To fix that, cause a redo log write by creating another
transaction. The transaction rollback (which internally does commit)
will be flushed to the redo log, and before that, all the preceding
changes will be flushed to the redo log as well.
row_log_table_apply_insert_low(), row_log_table_apply_update():
When reporting the error_key_num, only count the clustered index
if it corresponds to a key in the SQL layer.
The assertion failure was probably introduced by the (incomplete)
MySQL 5.6.28 bug fix
Bug #21364096 THE BOGUS DUPLICATE KEY ERROR IN ONLINE DDL
WITH INCORRECT KEY NAME
which we are improving.
Side note: the fix was incorrectly merged to MySQL 5.7.10;
incorrect key names will continue to be reported in MySQL 5.7.
ha_innobase::check_if_supported_inplace_alter(): enabled non-rebuilding operations for trx_id-based system-versioning tables
Also added better error message for not implemented operations.
1. Reverts "Tests: disabled TRT for some IB tests [#302]"
6d78496aee
2. Removes setting TRANSACTION_REGISTRY=0 in mysqldump
--system-versioning-transaction-registry now is OFF by default.
This commit should be reverted back if the default will change.
Tests affected: mysqldump mysqldump-max openssl_1
InnoDB in MariaDB 10.2 appears to only write MLOG_FILE_RENAME2
redo log records during table-rebuilding ALGORITHM=INPLACE operations.
We must write the records for any .ibd file renames, so that the
operations are crash-safe.
If InnoDB is killed during a RENAME TABLE operation, it can happen that
the transaction for updating the data dictionary will be rolled back.
But, nothing will roll back the renaming of the .ibd file
(the MLOG_FILE_RENAME2 only guarantees roll-forward), or for that matter,
the renaming of the dict_table_t::name in the dict_sys cache. We introduce
the undo log record TRX_UNDO_RENAME_TABLE to fix this.
fil_space_for_table_exists_in_mem(): Remove the parameters
adjust_space, table_id and some code that was trying to work around
these deficiencies.
fil_name_write_rename(): Write a MLOG_FILE_RENAME2 record.
dict_table_rename_in_cache(): Invoke fil_name_write_rename().
trx_undo_rec_copy(): Set the first 2 bytes to the length of the
copied undo log record.
trx_undo_page_report_rename(), trx_undo_report_rename():
Write a TRX_UNDO_RENAME_TABLE record with the old table name.
row_rename_table_for_mysql(): Invoke trx_undo_report_rename()
before modifying any data dictionary tables.
row_undo_ins_parse_undo_rec(): Roll back TRX_UNDO_RENAME_TABLE
by invoking dict_table_rename_in_cache(), which will take care
of both renaming the table and the file.
The InnoDB background DROP TABLE queue is something that we should
really remove, but are unable to until we remove dict_operation_lock
so that DDL and DML operations can be combined in a single transaction.
Because the queue is not persistent, it is not crash-safe. We should
in some way ensure that the deferred-dropped tables will be dropped
after server restart.
The existence of two separate transactions complicates the error handling
of CREATE TABLE...SELECT. We should really not break locks in DROP TABLE.
Our solution to these problems is to rename the table to a temporary
name, and to drop such-named tables on InnoDB startup. Also, the
queue will use table IDs instead of names from now on.
check-testcase.test: Ignore #sql-ib*.ibd files, because tables may enter
the background DROP TABLE queue shortly before the test finishes.
innodb.drop_table_background: Test CREATE...SELECT and the creation of
tables whose file name starts with #sql-ib.
innodb.alter_crash: Adjust the recovery, now that the #sql-ib tables
will be dropped on InnoDB startup.
row_mysql_drop_garbage_tables(): New function, to drop all #sql-ib tables
on InnoDB startup.
row_drop_table_for_mysql_in_background(): Remove an unnecessary and
misplaced call to log_buffer_flush_to_disk(). (The call should have been
after the transaction commit. We do not care about flushing the redo log
here, because the table would be dropped again at server startup.)
Remove the entry from the list after the table no longer exists.
If server shutdown has been initiated, empty the list without actually
dropping any tables. They will be dropped again on startup.
row_drop_table_for_mysql(): Do not call lock_remove_all_on_table().
Instead, if locks exist, defer the DROP TABLE until they do not exist.
If the table name does not start with #sql-ib, rename it to that prefix
before adding it to the background DROP TABLE queue.
Whenever we call merge_role_privileges on a role, we make use of
the role->counter variable to check if all it's children have had their
privileges merged. Only if all children have had their privileges merged,
do we update the privileges on parent. This is done to prevent extra work.
The same idea is employed during flush privileges. You only begin merging
from "leaf" roles. The recursive calls will merge their parents at some point.
A problem arises when we try to "re-merge" a parent. Take the following graph:
{noformat}
A (0) ---- C (2) ---- D (2) ---- USER
/ /
B (0) ----/ /
/
E (0) --------------/
{noformat}
In parentheses we have the "counter" value right before we start to iterate
through the roles hash and propagate values. It represents the number of roles
granted to the current role. The order in which we iterate through the roles
hash is alphabetical.
* First merge A, which leads to decreasing the counter for C to 1. Since C is
not 0, we don't proceed with merging into C.
* Second we merge B, which leads to decreasing the counter for C to 0. Now
we proceed with merging into C. This leads to reducing the counter for D to 1
as part of C merge process.
* Third as we iterate through the hash, we see that C has counter 0, thus we
start the merge process *again*. This leads to reducing the counter for
D to 0! We then attempt to merge D.
* Fourth we start merging E. When E sees D as it's parent (according to the code)
it attempts to reduce D's counter, which leads to overflow. Now D's counter is
a very large number, thus E's privileges are not forwarded to D yet.
To correct this behavior we must make sure to only start merging from initial
leaf nodes.
When granting a role to another role, DB privileges get propagated. If
the grantee had no previous DB privileges, an extra ACL_DB entry is created to
house those "indirectly received" privileges. If, afterwards, DB
privileges are granted to the grantee directly, we must make sure to not
create a duplicate ACL_DB entry.
one) and affected result files.
Specifically to rpl_semi_sync_after_sync*, the changed results reflect
a fact that thanks to fixes in the dump thread functionality
there's no longer zombie thread to kill neither such thread represent
a semisync client (so the counter drops).
and specifically the ack receiving functionality.
Semisync is turned to be static instead of plugin so its functions
are invoked at the same points as RUN_HOOKS.
The RUN_HOOKS and the observer interface remain to be removed by later
patch.
Todo:
React on killed status by repl_semisync_master.wait_after_sync(). Currently
Repl_semi_sync_master::commit_trx does not check the killed status.
There were few bugfixes found that are present in mysql and its unclear
whether/how they are covered. Those include:
Bug#15985893: GTID SKIPPED EVENTS ON MASTER CAUSE SEMI SYNC TIME-OUTS
Bug#17932935 CALLING IS_SEMI_SYNC_SLAVE() IN EACH FUNCTION CALL
HAS BAD PERFORMANCE
Bug#20574628: SEMI-SYNC REPLICATION PERFORMANCE DEGRADES WITH A HIGH NUMBER OF THREADS
Part of MDEV-13073 AliSQL Optimize performance of semisync
The idea it to use a dedicated lock detecting if there is new data in
the master's binary log instead of the overused LOCK_log.
Changes:
- Use dedicated COND variables for the relay and binary log signaling.
This was needed as we where the old 'update_cond' variable was used
with different mutex's, which could cause deadlocks.
- Relay log uses now COND_relay_log_updated and LOCK_log
- Binary log uses now COND_bin_log_updated and LOCK_binlog_end_pos
- Renamed signal_cnt to relay_signal_cnt (as we now have two signals)
- Added some missing error handling in MYSQL_BIN_LOG::new_file_impl()
- Reformatted some comments with old style
- Renamed m_key_LOCK_binlog_end_pos to key_LOCK_binlog_end_pos
- Changed 'signal_update()' to update_binlog_end_pos() which works for
both relay and binary log
Part of MDEV-13073 AliSQL Optimize performance of semisync
Did the following renames to match other similar variables
key_ss_mutex_LOCK_binlog_ > key_LOCK_bing
key_ss_cond_COND_binlog_send_ -> key_COND_binlog_send
COND_binlog_send_ -> COND_binlog_send
LOCK_binlog_ -> LOCK_binlog
debian/mariadb-server-10.2.install does not install semisync libs.
Merge branch '10.3' into trunk
Both field_visibility and VERS_HIDDEN_FLAG exist independently.
TODO:
VERS_HIDDEN_FLAG should be replaced with SYSTEM_INVISIBLE (or COMPLETELY_INVISIBLE?).
lock_move_rec_list_start(): Relax a too strict assertion.
This function can be invoked on the leftmost leaf page, after all.
So, the first record of each page can be a 'default row' record,
but the 'default row' record must never be locked.
non-standard, redundant, potentially risky in the future,
hides bugs. See #383, #384, #385
Fixed a parser bug where
SELECT * FROM (t1 join t2) FOR SYSTEM_TIME ...
was not an error.
row_undo_step(), trx_rollback_active(): Abort the rollback of a
recovered ordinary transaction if fast shutdown has been initiated.
trx_rollback_resurrected(): Convert an aborted-rollback transaction
into a fake XA PREPARE transaction, so that fast shutdown can proceed.
trx_rollback_resurrected(): If shutdown was initiated, fake all
remaining active transactions to XA PREPARE state, so that shutdown
can proceed. Also, make the parameter "all" an output that will be
assigned to FALSE in this case.
trx_rollback_or_clean_recovered(): Remove the shutdown check
(it was moved to trx_rollback_resurrected()).
trx_undo_free_prepared(): Relax assertions.
The problem was that multi_range_read_info_const() called
multi_range_key_create_key() which changed m_part_spec.start_part,
while there was an activ table scan ongoing.
Fixed by copying and restoring m_part_spec around
multi_range_key_create_calls()
When the transaction isolation level is SERIALIZABLE, or when
a locking read is performed in the REPEATABLE READ isolation level,
InnoDB must lock delete-marked records in order to prevent another
transaction from inserting something.
However, at READ UNCOMMITTED or READ COMMITTED isolation level or
when the parameter innodb_locks_unsafe_for_binlog is set, the
repeatability of the reads does not matter, and there is no need
to lock any records.
row_search_mvcc(): Skip locks on delete-marked committed records upfront,
instead of invoking row_unlock_for_mysql() afterwards. The unlocking
never worked for secondary index records.
* Note: breaking change; since this commit, a plugin that has
worked so far might get rejected due to plugin maturity
* mariabackup is not affected (allows all plugins)
* VERSION file defines SERVER_MATURITY, which defines the
corresponding numeric value as SERVER_MATURITY_LEVEL in
include/mysql_version.h
* The default value for 'plugin_maturity' is SERVER_MATURITY_LEVEL - 1
* Logs a warning if a plugin has maturity lower than
SERVER_MATURITY_LEVEL
* Tests suppress the plugin maturity warning
* Tests use --plugin-maturity=unknown by default so as not to fail
due to the stricter plugin maturity handling
This was missing bug fix from MySQL wsrep i.e. Galera.
Problem was that if stored procedure declares a handler that
catches deadlock error, then the error may have been
cleared in method sp_rcontext::handle_sql_condition().
Use wsrep_conflict_state correctly to determine is the
error already sent to client.
Add test case for both this bug and MDEV-12837: WSREP: BF
lock wait long. Test requires both fixes to pass.
This is 10.1 version where no merge error exists.
wsrep_on_check
New check function. Galera can't be enabled
if innodb-lock-schedule-algorithm=VATS.
innobase_kill_query
In Galera async kill we could own lock mutex.
innobase_init
If Variance-Aware-Transaction-Sheduling Algorithm (VATS) is
used on Galera we refuse to start InnoDB.
Changed innodb-lock-schedule-algorithm as read-only parameter
as it was designed to be.
lock_rec_other_has_expl_req,
lock_rec_other_has_conflicting,
lock_rec_lock_slow
lock_table_other_has_incompatible
lock_rec_insert_check_and_lock
Change pointer to conflicting lock to normal pointer as this
pointer contents could be changed later.
* again, as in 10.2, NOW is a keyword only if followed by parentheses
* use AS OF CURRENT_TIMESTAMP or AS OF NOW()
* AS OF CURRENT_TIMESTAMP and AS OF NOW() mean AS OF NOW(6),
not AS OF NOW(0), (same behavior as in a DEFAULT clause)
LOCK_thd_data was used to protect both THD data and
ensure that the THD is not deleted while it was in use
This patch moves the THD delete protection to LOCK_thd_kill,
which already protects the THD for kill.
The benefits are:
- More well defined what LOCK_thd_data protects
- LOCK_thd_data usage is now much simpler and easier to verify
- Less chance of deadlocks in SHOW PROCESS LIST as there is less
chance of interactions between mutexes
- Remove not needed LOCK_thread_count from
thd_get_error_context_description()
- Fewer mutex taken for thd->awake()
Other things:
- Don't take mysys->var mutex in show processlist to check if thread
is kill marked
- thd->awake() now automatically takes the LOCK_thd_kill mutex
(Simplifies code)
- Apc uses LOCK_thd_kill instead of LOCK_thd_data
- Remove not used thd_rpl_is_parallel()
- Remove not used mysql_notify_thread_having_shared_lock()
- Remove not needed LOCK_thread_count from MYSQL_BIN_LOG::reset_logs()
- LOCK_thread_count is not protecting against rollback, so this
code and comment is not needed
- Remove mutex_locks in slave.cc that are not needed.
Added THD::assert_not_linked() to ensure that it was safe to remove
- Fixed not repeatable test load_data_stmt_view
- Updated binlog_killed to test removal of mutex
(thanks to Andrei Elkin for test)
- More code comments
Allow DROP TABLE `#mysql50##sql-...._.` to drop tables that were
being rebuilt by ALGORITHM=INPLACE
NOTE: If the server is killed after the table-rebuilding ALGORITHM=INPLACE
commits inside InnoDB but before the .frm file has been replaced, then
the recovery will involve something else than DROP TABLE.
NOTE: If the server is killed in a true inplace ALTER TABLE commits
inside InnoDB but before the .frm file has been replaced, then we
are really out of luck. To properly handle that situation, we would
need a transactional mysql.ddl_fixup table that directs recovery to
rename or remove files.
prepare_inplace_alter_table_dict(): Use the altered_table->s->table_name
for generating the new_table_name.
table_name_t::part_suffix: The start of the partition name suffix.
table_name_t::dbend(): Return the end of the schema name.
table_name_t::dblen(): Return the length of the schema name, in bytes.
table_name_t::basename(): Return the name without the schema name.
table_name_t::part(): Return the partition name, or NULL if none.
row_drop_table_for_mysql(): Assert for #sql, not #sql-ib.
When logging ROW_T_INSERT or ROW_T_UPDATE records, we did not normalize
the DB_TRX_ID of the current transaction into 0 if the current transaction
had started (modifying other tables) before the ALTER TABLE started.
MDEV-13654 introduced this normalization for ROW_T_DELETE
and for all operations with ADD PRIMARY KEY, in row_log_table_get_pk().
This was missing bug fix from MySQL wsrep i.e. Galera.
Problem was that if stored procedure declares a handler that
catches deadlock error, then the error may have been
cleared in method sp_rcontext::handle_sql_condition().
Use wsrep_conflict_state correctly to determine is the
error already sent to client.
Add test case for both this bug and MDEV-12837: WSREP: BF
lock wait long. Test requires both fixes to pass.
Introduce the debug flag trx_t::persistent_stats to suppress the
assertion for the updates of persistent statistics during fast
shutdown.
dict_stats_exec_sql(): Do execute the statement even though shutdown
has been initiated.
dict_stats_exec_sql(): Expect the caller to always provide a transaction.
Remove some redundant assertions. The caller must hold dict_sys->mutex,
but holding dict_operation_lock is only necessary for accessing
data dictionary tables, which we are not accessing.
dict_stats_save_index_stat(): Acquire dict_sys->mutex
for invoking dict_stats_exec_sql().
dict_stats_save(), dict_stats_update_for_index(), dict_stats_update(),
dict_stats_drop_index(), dict_stats_delete_from_table_stats(),
dict_stats_delete_from_index_stats(), dict_stats_drop_table(),
dict_stats_rename_in_table_stats(), dict_stats_rename_in_index_stats(),
dict_stats_rename_table(): Use a single caller-provided
transaction that is started and committed or rolled back by the caller.
dict_stats_process_entry_from_recalc_pool(): Let the caller provide
a transaction object.
ha_innobase::open(): Pass a transaction to dict_stats_init().
ha_innobase::create(), ha_innobase::discard_or_import_tablespace():
Pass a transaction to dict_stats_update().
ha_innobase::rename_table(): Pass a transaction to
dict_stats_rename_table(). We do not use the same transaction
as the one that updated the data dictionary tables, because
we already released the dict_operation_lock. (FIXME: there is
a race condition; a lock wait on SYS_* tables could occur
in another DDL transaction until the data dictionary transaction
is committed.)
ha_innobase::info_low(): Pass a transaction to dict_stats_update()
when calculating persistent statistics.
alter_stats_norebuild(), alter_stats_rebuild(): Update the
persistent statistics as well. In this way, a single transaction
will be used for updating the statistics of a whole table, even
for partitioned tables.
ha_innobase::commit_inplace_alter_table(): Drop statistics for
all partitions when adding or dropping virtual columns, so that
the statistics will be recalculated on the next handler::open().
This is a refactored version of Oracle Bug#22469660 fix.
RecLock::add_to_waitq(), lock_table_enqueue_waiting():
Do not allow a lock wait to occur for updating statistics
in a data dictionary transaction, such as DROP TABLE. Instead,
return the previously unused error code DB_QUE_THR_SUSPENDED.
row_merge_lock_table(), row_mysql_lock_table(): Remove dead code
for handling DB_QUE_THR_SUSPENDED.
row_drop_table_for_mysql(), row_truncate_table_for_mysql():
Drop the statistics as part of the data dictionary transaction.
After TRUNCATE TABLE, the statistics will be recalculated on
subsequent ha_innobase::open(), similar to how the logic after
the above-mentioned Oracle Bug#22469660 fix in
ha_innobase::commit_inplace_alter_table() works.
btr_defragment_thread(): Use a single transaction object for
updating defragmentation statistics.
dict_stats_save_defrag_stats(), dict_stats_save_defrag_stats(),
dict_stats_process_entry_from_defrag_pool(),
dict_defrag_process_entries_from_defrag_pool(),
dict_stats_save_defrag_summary(), dict_stats_save_defrag_stats():
Add a parameter for the transaction.
dict_stats_empty_table(): Make public. This will be called by
row_truncate_table_for_mysql() after dropping persistent statistics,
to clear the memory-based statistics as well.
Do not generate fake values when adding an auto-inc column to a versioned
table. This is not a auto-inc issue, but a more general case of adding
a not nullalble unique column to a table with history. We don't support
it yet, not even with a special auto-inc hack. As a workaround, one
can use a nullable unique column, that works.
* Note: breaking change; since this commit, a plugin that has
worked so far might get rejected due to plugin maturity
* mariabackup is not affected (allows all plugins)
* VERSION file defines SERVER_MATURITY, which defines the
corresponding numeric value as SERVER_MATURITY_LEVEL in
include/mysql_version.h
* The default value for 'plugin_maturity' is SERVER_MATURITY_LEVEL - 1
* Logs a warning if a plugin has maturity lower than
SERVER_MATURITY_LEVEL
* Tests suppress the plugin maturity warning
* Tests use --plugin-maturity=unknown by default so as not to fail
due to the stricter plugin maturity handling
This commit implements aggregate stored functions. The basic idea behind
the feature is:
* Implement a special instruction FETCH GROUP NEXT ROW that will pause
the execution of the stored function. When the instruction is reached,
execution of the initial query resumes "as if" the function returned.
This gives the server the opportunity to advance to the next row in the
result set.
* Stored aggregates behave like regular aggregate functions. The
implementation of thus resides in the class Item_sum_sp. Because it is
an aggregate function, for each new row in the group, the
Item_sum_sp::add() method will be called. This is when execution resumes
and the function does another iteration to "add" one extra element to
the final result.
* When the end of group is reached, val_xxx() method will be called for
the item. This case is handled by another execute step for the stored
function, only with a special flag to force a call to the return
handler. See Item_sum_sp::execute() for details.
To allow this pause and resume semantic, we must preserve the function
context across executions. This is stored in Item_sp::sp_query_arena only for
aggregate stored functions, but has no impact for regular functions.
We also enforce aggregate functions to include the "FETCH GROUP NEXT ROW"
instruction.
Signed-off-by: Vicențiu Ciorbaru <vicentiu@mariadb.org>
Problem was that Binlog_checkpoint can happen at random times.
Fixed by not write binlog_checkpoint for the rpl_log test.
Other things:
- Removed not used variable "$keep_gtid_events"
- Added option for show_binlog_events to skip binlog_checkpoint
This is about adding more options to force slave retries
Two new variables has been added:
slave_transaction_retry_errors
- Tells the slave thread to retry transaction for replication when a
query event returns an error from the provided list. Deadlock and
elapsed lock wait timeout errors are automatically added to this list
slave-transaction-retry-interval
- Interval of the slave SQL thread will retry a transaction
in case it failed with a deadlock or elapsed lock wait
timeout or listed in slave_transaction_retry_errors
Other changes:
- Simplifed code for slave_skip_errors (to be aligned with
slave_transaction_retry_errors)
- Renamed print_slave_skip_errors() to make_slave_skip_errors_printable()
- Remove printing error from init_slave_skip_errors as my_bitmap_init()
will do that if needed.
- Generalize has_temporary_error()
Other things:
- Cleanup of allocated bitmaps done in open(), which
simplifies init_partition_bitmaps()
- Add needed defines in ha_spider.cc to enable new spider code
- Fixed some DBUG_PRINT() to be consistent with normal code
- Removed end space
- The changes in test cases partition_innodb, partition_range,
partition_pruning etc are becasue partitions can now more exactly
calculate the number of rows in a range.
Contains spider patches:
014,015,023,033,035,037,040,042,044,045,049,050,051,053,059
Allow partition engines to access table->s->connect_string for engines
that uses HTON_CAN_READ_CONNECT_STRING_IN_PARTITION
Don't reset table->s->connect_string in ha_partition::open
Affected tests (forced mode):
main.index_merge_myisam
After optimization versioning AND takes operands from WHERE AND
leaving `select_lex->where` as empty dangling AND.
1. Removing data type specific constants from enum_item_param_state,
adding SHORT_DATA_VALUE instead.
2. Replacing tests for Item_param::state for the removed constants to
tests for Type_handler::cmp_type() against {INT|REAL|TIME|DECIAML}_RESULT.
Deriving Item_param::PValue from Type_handler_hybrid_field_type,
to store the data type handler of the current value of the parameter.
3. Moving Item_param::decimal_value and Item_param::str_value_ptr
to Item_param::PValue. Adding Item_param::PValue::m_string
and changing Item_param to use it to store string values,
instead of Item::str_value. The intent is to replace Item_param::value
to a st_value based implementation in the future, to avoid duplicate code.
Adding a sub-class Item::PValue_simple, to implement
Item_param::PValue::swap() easier.
Remaming Item_basic_value::fix_charset_and_length_from_str_value()
to fix_charset_and_length() and adding the "CHARSET_INFO" pointer
parameter, instead of getting it directly from item->str_value.charset().
Changing Item_param to pass value.m_string.charset() instead
of str_value.charset().
Adding a String argument to the overloaded
fix_charset_and_length_from_str_value() and changing Item_param
to pass value.m_string instead of str_value.
4. Replacing the case in Item_param::save_in_field() to a call
for Type_handler::Item_save_in_field().
5. Adding new methods into Item_param::PValue:
val_real(), val_int(), val_decimal(), val_str().
Changing the corresponding Item_param methods
to use these new Item_param::PValue methods
internally. Adding a helper method
Item_param::can_return_value() and removing
duplicate code in Item_param::val_xxx().
6. Removing value.set_handler() from Item_param::set_conversion()
and Type_handler_xxx::Item_param_set_from_value().
It's now done inside Item_param::set_param_func(),
Item_param::set_value() and Item_param::set_limit_clause_param().
7. Changing Type_handler_int_result::Item_param_set_from_value()
to set max_length using attr->max_length instead of
MY_INT64_NUM_DECIMAL_DIGITS, to preserve the data type
of the assigned expression more precisely.
8. Adding Type_handler_hybrid_field_type::swap(),
using it in Item_param::PValue::swap().
9. Moving the data-type specific code from
Item_param::query_val_str(), Item_param::eq(),
Item_param::clone_item() to
Item_param::value_query_type_str(),
Item_param::value_eq(), Item_param::value_clone_item(),
to split the "state" dependent code and
the data type dependent code.
Later we'll split the data type related code further
and add new methods in Type_handler. This will be done
after we replace Item_param::PValue to st_value.
10. Adding asserts into set_int(), set_double(), set_decimal(),
set_time(), set_str(), set_longdata() to make sure that
the value set to Item_param corresponds to the previously
set data type handler.
11. Adding tests into t/ps.test and suite/binlog/t/binlog_stm_ps.test,
to cover Item_param::print() and Item_param::append_for_log()
for LIMIT clause parameters.
Note, the patch does not change the behavior covered by the new
tests. Adding for better code coverage.
12. Adding tests for more precise integer data type in queries like this:
EXECUTE IMMEDIATE
'CREATE OR REPLACE TABLE t1 AS SELECT 999999999 AS a,? AS b'
USING 999999999;
The explicit integer literal and the same integer literal
passed as a PS parameter now produce columns of the same data type.
Re-recording old results in ps.result, gis.result, func_hybrid_type.result
accordingly.
