Add code to waiting for a set of errors.
Add code to waiting for an error instead of waiting for io thread to stop, as
after 'START SLAVE', the status of io thread is still not running.
But it doesn't mean slave io thread encounters an error.
Some of the test cases reference to binlog position and
these position numbers are written into result explicitly.
It is difficult to maintain if log event format changes.
There are a couple of cases explicit position number appears,
we handle them in different ways
A. 'CHANGE MASTER ...' with MASTER_LOG_POS or/and RELAY_LOG_POS options
Use --replace_result to mask them.
B. 'SHOW BINLOG EVENT ...'
Replaced by show_binlog_events.inc or wait_for_binlog_event.inc.
show_binlog_events.inc file's function is enhanced by given
$binlog_file and $binlog_limit.
C. 'SHOW SLAVE STATUS', 'show_slave_status.inc' and 'show_slave_status2.inc'
For the test cases just care a few items in the result of 'SHOW SLAVE STATUS',
only the items related to each test case are showed.
'show_slave_status.inc' is rebuild, only the given items in $status_items
will be showed.
'check_slave_is_running.inc' and 'check_slave_no_error.inc'
and 'check_slave_param.inc' are auxiliary files helping
to show running status and error information easily.
The test was used to fail because of
UPDATE t3,t4 SET t3.a=t4.a + bug27417(1);
did not prescribe the order of two row operations implied by the update.
Fixed with forcing the order with adding a where condition w/o
affecting the former bug fixes logics.
Clarified error messages related to unsafe statements:
- avoid the internal technical term "row injection"
- use 'binary log' instead of 'binlog'
- avoid the word 'unsafeness'
of sync
In RBR, sometimes the table->s->last_null_bit_pos can be zero. This
has impact at the slave when it compares records fetched from the
storage engine against records in the binary log event. If
last_null_bit_pos is zero the slave, while comparing in
log_event.cc:record_compare function, would set all bits in the last
null_byte to 1 (assumed all 8 were unused) . Thence it would loose the
ability to distinguish records that were similar in contents except
for the fact that some field was null in one record, but not in the
other. Ultimately this would cause wrong matches, and in the specific
case depicted in the bug report the same record would be updated
twice, resulting in a lost update.
Additionally, in the record_compare function the slave was setting the
X bit unconditionally. There are cases that the X bit does not exist
in the record header. This could also lead to wrong matches between
records.
We fix both by conditionally resetting the bits: (i) unused null_bits
are set if last_null_bit_pos > 0; (ii) X bit is set if
HA_OPTION_PACK_RECORD is in use.
transaction
BUG#52616 Temp table prevents switch binlog format from STATEMENT to ROW
Before the WL#2687 and BUG#46364, every non-transactional change that happened
after a transactional change was written to trx-cache and flushed upon
committing the transaction. WL#2687 and BUG#46364 changed this behavior and
non-transactional changes are now written to the binary log upon committing
the statement.
A binary log event is identified as transactional or non-transactional through
a flag in the Log_event which is set taking into account the underlie storage
engine on what it is stems from. In the current bug, this flag was not being
set properly when the DROP TEMPORARY TABLE was executed.
However, while fixing this bug we figured out that changes to temporary tables
should be always written to the trx-cache if there is an on-going transaction.
Otherwise, binlog events in the reversed order would be produced.
Regarding concurrency, keeping changes to temporary tables in the trx-cache is
also safe as temporary tables are only visible to the owner connection.
In this patch, we classify the following statements as unsafe:
1 - INSERT INTO t_myisam SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_myisam
3 - CREATE TEMPORARY TABLE t_myisam_temp SELECT * FROM t_myisam
On the other hand, the following statements are classified as safe:
1 - INSERT INTO t_innodb SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_innodb
The patch also guarantees that transactions that have a DROP TEMPORARY are
always written to the binary log regardless of the mode and the outcome:
commit or rollback. In particular, the DROP TEMPORARY is extended with the
IF EXISTS clause when the current statement logging format is set to row.
Finally, the patch allows to switch from STATEMENT to MIXED/ROW when there
are temporary tables but the contrary is not possible.
BUG#46364 introduced the flag binlog_direct_non_transactional_updates which
would make N-changes to be written to the binary log upon committing the
statement when "ON". On the other hand, when "OFF" the option was supposed
to mimic the behavior in 5.1. However, the implementation was not mimicking
the behavior correctly and the following bugs popped up:
Case #1: N-changes executed within a transaction would go into
the S-cache. When later in the same transaction a
T-change occurs, N-changes following it were written
to the T-cache instead of the S-cache. In some cases,
this raises problems. For example, a
Table_map_log_event being written initially into the
S-cache, together with the initial N-changes, would be
absent from the T-cache. This would log N-changes
orphaned from a Table_map_log_event (thence discarded
at the slave). (MIXED and ROW)
Case #2: When rolling back a transaction, the N-changes that
might be in the T-cache were disregarded and
truncated along with the T-changes. (MIXED and ROW)
Case #3: When a MIXED statement (TN) is ahead of any other
T-changes in the transaction and it fails, it is kept
in the T-cache until the transaction ends. This is
not the case in 5.1 or Betony (5.5.2). In these, the
failed TN statement would be written to the binlog at
the same instant it had failed and not deferred until
transaction end. (SBR)
To fix these problems, we have decided to do what follows:
For Case #1 and #2, we circumvent them:
1. by not letting binlog_direct_non_transactional_updates
affect MIXED and RBR. These modes will keep the behavior
provided by WL#2687. Although this will make Celosia to
behave differently from 5.1, an execution will be always
safe under such modes in the sense that slaves will never
go out sync. In 5.1, using either MIXED or ROW while
mixing N-statements and T-statements was not safe.
For Case #3, we don't actually fix it. We:
1. keep it and make all MIXED statements whether they end
up failing or not or whether they are up front in the
transaction or after some transactional change to always
be stored in the T-cache. This means that it is written
to the binary log on transaction commit/rollback only.
2. We make the warning message even more specific about the
MIXED statement and SBR.
Conflicts:
Text conflict in client/mysqlbinlog.cc
Text conflict in mysql-test/Makefile.am
Text conflict in mysql-test/collections/default.daily
Text conflict in mysql-test/r/mysqlbinlog_row_innodb.result
Text conflict in mysql-test/suite/rpl/r/rpl_typeconv_innodb.result
Text conflict in mysql-test/suite/rpl/t/rpl_get_master_version_and_clock.test
Text conflict in mysql-test/suite/rpl/t/rpl_row_create_table.test
Text conflict in mysql-test/suite/rpl/t/rpl_slave_skip.test
Text conflict in mysql-test/suite/rpl/t/rpl_typeconv_innodb.test
Text conflict in mysys/charset.c
Text conflict in sql/field.cc
Text conflict in sql/field.h
Text conflict in sql/item.h
Text conflict in sql/item_func.cc
Text conflict in sql/log.cc
Text conflict in sql/log_event.cc
Text conflict in sql/log_event_old.cc
Text conflict in sql/mysqld.cc
Text conflict in sql/rpl_utility.cc
Text conflict in sql/rpl_utility.h
Text conflict in sql/set_var.cc
Text conflict in sql/share/Makefile.am
Text conflict in sql/sql_delete.cc
Text conflict in sql/sql_plugin.cc
Text conflict in sql/sql_select.cc
Text conflict in sql/sql_table.cc
Text conflict in storage/example/ha_example.h
Text conflict in storage/federated/ha_federated.cc
Text conflict in storage/myisammrg/ha_myisammrg.cc
Text conflict in storage/myisammrg/myrg_open.c
DBUG_SYNC_POINT has at least one strong limitation that it's not defined
on all platforms. It has issues cooperating with @@debug.
All in all its functionality is superseded by DEBUG_SYNC facility and
there is no reason to maintain the old less flexible one.
Fixed with adding debug_sync_set_action() function as a facility to set up
a sync-action in the server sources code and re-writing existing simulations
(found 3) to use it.
Couple of tests have been reworked as well.
The patch offers a pattern for setting sync-points in replication threads
where the standard DEBUG_SYNC does not suffice to reach goals.
Original revision:
------------------------------------------------------------
revision-id: li-bing.song@sun.com-20100130124925-o6sfex42b6noyc6x
parent: joro@sun.com-20100129145427-0n79l9hnk0q43ajk
committer: <Li-Bing.Song@sun.com>
branch nick: mysql-5.1-bugteam
timestamp: Sat 2010-01-30 20:49:25 +0800
message:
Bug #48321 CURRENT_USER() incorrectly replicated for DROP/RENAME USER;
REVOKE/GRANT; ALTER EVENT.
The following statements support the CURRENT_USER() where a user is needed.
DROP USER
RENAME USER CURRENT_USER() ...
GRANT ... TO CURRENT_USER()
REVOKE ... FROM CURRENT_USER()
ALTER DEFINER = CURRENT_USER() EVENT
but, When these statements are binlogged, CURRENT_USER() just is binlogged
as 'CURRENT_USER()', it is not expanded to the real user name. When slave
executes the log event, 'CURRENT_USER()' is expand to the user of slave
SQL thread, but SQL thread's user name always NULL. This breaks the replication.
After this patch, All above statements are rewritten when they are binlogged.
The CURRENT_USER() is expanded to the real user's name and host.
------------------------------------------------------------
Conflicts:
- mysql-test/r/mysqld--help-win.result
- sql/sys_vars.cc
Original revsion (in next-mr-bugfixing):
------------------------------------------------------------
revno: 2971 [merge]
revision-id: alfranio.correia@sun.com-20100121210527-rbuheu5rnsmcakh1
committer: Alfranio Correia <alfranio.correia@sun.com>
branch nick: mysql-next-mr-bugfixing
timestamp: Thu 2010-01-21 21:05:27 +0000
message:
BUG#46364 MyISAM transbuffer problems (NTM problem)
It is well-known that due to concurrency issues, a slave can become
inconsistent when a transaction contains updates to both transaction and
non-transactional tables.
In a nutshell, the current code-base tries to preserve causality among the
statements by writing non-transactional statements to the txn-cache which
is flushed upon commit. However, modifications done to non-transactional
tables on behalf of a transaction become immediately visible to other
connections but may not immediately get into the binary log and therefore
consistency may be broken.
In general, it is impossible to automatically detect causality/dependency
among statements by just analyzing the statements sent to the server. This
happen because dependency may be hidden in the application code and it is
necessary to know a priori all the statements processed in the context of
a transaction such as in a procedure. Moreover, even for the few cases that
we could automatically address in the server, the computation effort
required could make the approach infeasible.
So, in this patch we introduce the option
- "--binlog-direct-non-transactional-updates" that can be used to bypass
the current behavior in order to write directly to binary log statements
that change non-transactional tables.
Besides, it is used to enable the WL#2687 which is disabled by default.
------------------------------------------------------------
revno: 2970.1.1
revision-id: alfranio.correia@sun.com-20100121131034-183r4qdyld7an5a0
parent: alik@sun.com-20100121083914-r9rz2myto3tkdya0
committer: Alfranio Correia <alfranio.correia@sun.com>
branch nick: mysql-next-mr-bugfixing
timestamp: Thu 2010-01-21 13:10:34 +0000
message:
BUG#46364 MyISAM transbuffer problems (NTM problem)
It is well-known that due to concurrency issues, a slave can become
inconsistent when a transaction contains updates to both transaction and
non-transactional tables.
In a nutshell, the current code-base tries to preserve causality among the
statements by writing non-transactional statements to the txn-cache which
is flushed upon commit. However, modifications done to non-transactional
tables on behalf of a transaction become immediately visible to other
connections but may not immediately get into the binary log and therefore
consistency may be broken.
In general, it is impossible to automatically detect causality/dependency
among statements by just analyzing the statements sent to the server. This
happen because dependency may be hidden in the application code and it is
necessary to know a priori all the statements processed in the context of
a transaction such as in a procedure. Moreover, even for the few cases that
we could automatically address in the server, the computation effort
required could make the approach infeasible.
So, in this patch we introduce the option
- "--binlog-direct-non-transactional-updates" that can be used to bypass
the current behavior in order to write directly to binary log statements
that change non-transactional tables.
Besides, it is used to enable the WL#2687 which is disabled by default.
REVOKE/GRANT; ALTER EVENT.
The following statements support the CURRENT_USER() where a user is needed.
DROP USER
RENAME USER CURRENT_USER() ...
GRANT ... TO CURRENT_USER()
REVOKE ... FROM CURRENT_USER()
ALTER DEFINER = CURRENT_USER() EVENT
but, When these statements are binlogged, CURRENT_USER() just is binlogged
as 'CURRENT_USER()', it is not expanded to the real user name. When slave
executes the log event, 'CURRENT_USER()' is expand to the user of slave
SQL thread, but SQL thread's user name always NULL. This breaks the replication.
After this patch, All above statements are rewritten when they are binlogged.
The CURRENT_USER() is expanded to the real user's name and host.
When using MyIsam tables and processing concurrent DML
statements, the server may be sending back an OK to the client
before actually finishing the transaction commit procedure. This
has been reported before in BUG@37521 and BUG@29334.
This particular test case gets affected, because it performs the
following sequence:
connect (conn2, ...)
connection conn2;
LOAD DATA CONCURRENT ...
disconnect (conn2, ...)
connection master;
sync_slave_with_master
diff_tables
At this point diff_tables may report difference in the table
content (the master seems to be missing the conn2 rows).
To workaround this MyISAM concurrent DML statements issue and
make this test case deterministic, we wait on conn2 until the
rows inserted show up in the table. After this the test case
proceeds as normally would before this patch.
In RBR, DDL statement will change binlog format to non row-based
format before it is binlogged, but the binlog format was not be
restored, and then manipulating a temporary table can not reset binlog
format to row-based format rightly. So that the manipulated statement
is binlogged with statement-based format.
To fix the problem, restore the state of binlog format after the DDL
statement is binlogged.
cant find record
Some engines return data for the record. Despite the fact that
the null bit is set for some fields, their old value may still in
the row. This can happen when unpacking an AI from the binlog on
top of a previous record in which a field is set to NULL, which
previously contained a value. Ultimately, this may cause the
comparison of records to fail when the slave is doing an index or
range scan.
We fix this by deploying a call to reset() for each field that is
set to null while unpacking a row from the binary log.
Furthermore, we also add mixed mode test case to cover the
scenario where updating and setting a field to null through a
Query event and later searching it through a rows event will
succeed.
Finally, we also change the reset() method, from Field_bit class,
so that it takes into account bits stored among the null bits and
not only the ones stored in the record.
It is well-known that due to concurrency issues, a slave can become
inconsistent when a transaction contains updates to both transaction and
non-transactional tables in statement and mixed modes.
In a nutshell, the current code-base tries to preserve causality among the
statements by writing non-transactional statements to the txn-cache which
is flushed upon commit. However, modifications done to non-transactional
tables on behalf of a transaction become immediately visible to other
connections but may not immediately get into the binary log and therefore
consistency may be broken.
In general, it is impossible to automatically detect causality/dependency
among statements by just analyzing the statements sent to the server. This
happen because dependency may be hidden in the application code and it is
necessary to know a priori all the statements processed in the context of
a transaction such as in a procedure. Moreover, even for the few cases that
we could automatically address in the server, the computation effort
required could make the approach infeasible.
So, in this patch we introduce the option
- "--binlog-direct-non-transactional-updates" that can be used to bypass
the current behavior in order to write directly to binary log statements
that change non-transactional tables.
Conflicts:
Text conflict in .bzr-mysql/default.conf
Text conflict in mysql-test/suite/rpl/r/rpl_loaddata_fatal.result
Text conflict in mysql-test/suite/rpl/r/rpl_stm_log.result
Text conflict in mysql-test/t/mysqlbinlog.test
Text conflict in sql/sql_acl.cc
Text conflict in sql/sql_servers.cc
Text conflict in sql/sql_update.cc
Text conflict in support-files/mysql.spec.sh
Problem: When RAND() is binlogged in statement mode, the seed is
binlogged too, so the replication slave generates the same
sequence of random numbers. This makes replication work in many
cases, but not in all cases: the order of rows is not guaranteed
for, e.g., UPDATE or INSERT...SELECT statements, so the row data
will be different if master and slave retrieve the rows in
different orders.
Fix: Mark RAND() as unsafe. It will generate a warning if
binlog_format=STATEMENT and switch to row-logging if
binlog_format=ROW.
Conflicts:
Text conflict in .bzr-mysql/default.conf
Text conflict in mysql-test/extra/rpl_tests/rpl_loaddata.test
Text conflict in mysql-test/r/mysqlbinlog2.result
Text conflict in mysql-test/suite/binlog/r/binlog_stm_mix_innodb_myisam.result
Text conflict in mysql-test/suite/binlog/r/binlog_unsafe.result
Text conflict in mysql-test/suite/rpl/r/rpl_insert_id.result
Text conflict in mysql-test/suite/rpl/r/rpl_loaddata.result
Text conflict in mysql-test/suite/rpl/r/rpl_stm_auto_increment_bug33029.result
Text conflict in mysql-test/suite/rpl/r/rpl_udf.result
Text conflict in mysql-test/suite/rpl/t/rpl_slow_query_log.test
Text conflict in sql/field.h
Text conflict in sql/log.cc
Text conflict in sql/log_event.cc
Text conflict in sql/log_event_old.cc
Text conflict in sql/mysql_priv.h
Text conflict in sql/share/errmsg.txt
Text conflict in sql/sp.cc
Text conflict in sql/sql_acl.cc
Text conflict in sql/sql_base.cc
Text conflict in sql/sql_class.h
Text conflict in sql/sql_db.cc
Text conflict in sql/sql_delete.cc
Text conflict in sql/sql_insert.cc
Text conflict in sql/sql_lex.cc
Text conflict in sql/sql_lex.h
Text conflict in sql/sql_load.cc
Text conflict in sql/sql_table.cc
Text conflict in sql/sql_update.cc
Text conflict in sql/sql_view.cc
Conflict adding files to storage/innobase. Created directory.
Conflict because storage/innobase is not versioned, but has versioned children. Versioned directory.
Conflict adding file storage/innobase. Moved existing file to storage/innobase.moved.
Conflict adding files to storage/innobase/handler. Created directory.
Conflict because storage/innobase/handler is not versioned, but has versioned children. Versioned directory.
Contents conflict in storage/innobase/handler/ha_innodb.cc
Metadata for geometric fields was not being properly stored by
the slave in its the table definition. This happened because
MYSQL_TYPE_GEOMETRY was not included in the 'switch... case' that
handles field metadata according to the field type. Therefore, it
would default to 0, leading to always have a mismatch between
master's field and slave fields'.
We fix this by deploying the missing 'case MYSQL_TYPE_GEOMETRY:'.
