Sometimes innodb_data_file_size_debug was reported as INT UNSIGNED
instead of BIGINT UNSIGNED. Make it uint instead of ulong to get
a more deterministic result.
InnoDB shutdown failed to properly take fil_crypt_thread() into account.
The encryption threads were signalled to shut down together with other
non-critical tasks. This could be much too early in case of slow shutdown,
which could need minutes to complete the purge. Furthermore, InnoDB
failed to wait for the fil_crypt_thread() to actually exit before
proceeding to the final steps of shutdown, causing the race conditions.
Furthermore, the log_scrub_thread() was shut down way too early.
Also it should remain until the SRV_SHUTDOWN_FLUSH_PHASE.
fil_crypt_threads_end(): Remove. This would cause the threads to
be terminated way too early.
srv_buf_dump_thread_active, srv_dict_stats_thread_active,
lock_sys->timeout_thread_active, log_scrub_thread_active,
srv_monitor_active, srv_error_monitor_active: Remove a race condition
between startup and shutdown, by setting these in the startup thread
that creates threads, not in each created thread. In this way, once the
flag is cleared, it will remain cleared during shutdown.
srv_n_fil_crypt_threads_started, fil_crypt_threads_event: Declare in
global rather than static scope.
log_scrub_event, srv_log_scrub_thread_active, log_scrub_thread():
Declare in static rather than global scope. Let these be created by
log_init() and freed by log_shutdown().
rotate_thread_t::should_shutdown(): Do not shut down before the
SRV_SHUTDOWN_FLUSH_PHASE.
srv_any_background_threads_are_active(): Remove. These checks now
exist in logs_empty_and_mark_files_at_shutdown().
logs_empty_and_mark_files_at_shutdown(): Shut down the threads in
the proper order. Keep fil_crypt_thread() and log_scrub_thread() alive
until SRV_SHUTDOWN_FLUSH_PHASE, and check that they actually terminate.
Problem was that log_scrub function did not take required log_sys mutex.
Background: Unused space in log blocks are padded with MLOG_DUMMY_RECORD if innodb-scrub-log
is enabled. As log files are written on circular fashion old log blocks can be reused
later for new redo-log entries. Scrubbing pads unused space in log blocks to avoid visibility
of the possible old redo-log contents.
log_scrub(): Take log_sys mutex
log_pad_current_log_block(): Increase srv_stats.n_log_scrubs if padding is done.
srv0srv.cc: Set srv_stats.n_log_scrubs to export vars innodb_scrub_log
ha_innodb.cc: Export innodb_scrub_log to global status.
The InnoDB source code contains quite a few references to a closed-source
hot backup tool which was originally called InnoDB Hot Backup (ibbackup)
and later incorporated in MySQL Enterprise Backup.
The open source backup tool XtraBackup uses the full database for recovery.
So, the references to UNIV_HOTBACKUP are only cluttering the source code.
The configuration parameter innodb_use_fallocate, which is mapped to
the variable srv_use_posix_fallocate, has no effect in MariaDB 10.2.2
or MariaDB 10.2.3.
Thus the configuration parameter and the variable should be removed.
fil_space_t::recv_size: New member: recovered tablespace size in pages;
0 if no size change was read from the redo log,
or if the size change was implemented.
fil_space_set_recv_size(): New function for setting space->recv_size.
innodb_data_file_size_debug: A debug parameter for setting the system
tablespace size in recovery even when the redo log does not contain
any size changes. It is hard to write a small test case that would
cause the system tablespace to be extended at the critical moment.
recv_parse_log_rec(): Note those tablespaces whose size is being changed
by the redo log, by invoking fil_space_set_recv_size().
innobase_init(): Correct an error message, and do not require a larger
innodb_buffer_pool_size when starting up with a smaller innodb_page_size.
innobase_start_or_create_for_mysql(): Allow startup with any initial
size of the ibdata1 file if the autoextend attribute is set. Require
the minimum size of fixed-size system tablespaces to be 640 pages,
not 10 megabytes. Implement innodb_data_file_size_debug.
open_or_create_data_files(): Round the system tablespace size down
to pages, not to full megabytes, (Our test truncates the system
tablespace to more than 800 pages with innodb_page_size=4k.
InnoDB should not imagine that it was truncated to 768 pages
and then overwrite good pages in the tablespace.)
fil_flush_low(): Refactored from fil_flush().
fil_space_extend_must_retry(): Refactored from
fil_extend_space_to_desired_size().
fil_mutex_enter_and_prepare_for_io(): Extend the tablespace if
fil_space_set_recv_size() was called.
The test case has been successfully run with all the
innodb_page_size values 4k, 8k, 16k, 32k, 64k.
Reduce the number of calls to encryption_get_key_get_latest_version
when doing key rotation with two different methods:
(1) We need to fetch key information when tablespace not yet
have a encryption information, invalid keys are handled now
differently (see below). There was extra call to detect
if key_id is not found on key rotation.
(2) If key_id is not found from encryption plugin, do not
try fetching new key_version for it as it will fail anyway.
We store return value from encryption_get_key_get_latest_version
call and if it returns ENCRYPTION_KEY_VERSION_INVALID there
is no need to call it again.
Analysis: By design InnoDB was reading first page of every .ibd file
at startup to find out is tablespace encrypted or not. This is
because tablespace could have been encrypted always, not
encrypted newer or encrypted based on configuration and this
information can be find realible only from first page of .ibd file.
Fix: Do not read first page of every .ibd file at startup. Instead
whenever tablespace is first time accedded we will read the first
page to find necessary information about tablespace encryption
status.
TODO: Add support for SYS_TABLEOPTIONS where all table options
encryption information included will be stored.
Contains also:
MDEV-10549 mysqld: sql/handler.cc:2692: int handler::ha_index_first(uchar*): Assertion `table_share->tmp_table != NO_TMP_TABLE || m_lock_type != 2' failed. (branch bb-10.2-jan)
Unlike MySQL, InnoDB still uses THR_LOCK in MariaDB
MDEV-10548 Some of the debug sync waits do not work with InnoDB 5.7 (branch bb-10.2-jan)
enable tests that were fixed in MDEV-10549
MDEV-10548 Some of the debug sync waits do not work with InnoDB 5.7 (branch bb-10.2-jan)
fix main.innodb_mysql_sync - re-enable online alter for partitioned innodb tables
Contains also
MDEV-10547: Test multi_update_innodb fails with InnoDB 5.7
The failure happened because 5.7 has changed the signature of
the bool handler::primary_key_is_clustered() const
virtual function ("const" was added). InnoDB was using the old
signature which caused the function not to be used.
MDEV-10550: Parallel replication lock waits/deadlock handling does not work with InnoDB 5.7
Fixed mutexing problem on lock_trx_handle_wait. Note that
rpl_parallel and rpl_optimistic_parallel tests still
fail.
MDEV-10156 : Group commit tests fail on 10.2 InnoDB (branch bb-10.2-jan)
Reason: incorrect merge
MDEV-10550: Parallel replication can't sync with master in InnoDB 5.7 (branch bb-10.2-jan)
Reason: incorrect merge
Backport pull request #125 from grooverdan/MDEV-8923_innodb_buffer_pool_dump_pct to 10.0
WL#6504 InnoDB buffer pool dump/load enchantments
This patch consists of two parts:
1. Dump only the hottest N% of the buffer pool(s)
2. Prevent hogging the server duing BP load
From MySQL - commit b409342c43ce2edb68807100a77001367c7e6b8e
Add testcases for innodb_buffer_pool_dump_pct_basic.
Part of the code authored by Daniel Black
WL#6504 InnoDB buffer pool dump/load enchantments
This patch consists of two parts:
1. Dump only the hottest N% of the buffer pool(s)
2. Prevent hogging the server duing BP load
From MySQL - commit b409342c43ce2edb68807100a77001367c7e6b8e
Analysis: Current implementation will write and read at least one block
(sort_buffer_size bytes) from disk / index even if that block does not
contain any records.
Fix: Avoid writing / reading empty blocks to temporary files (disk).
Added new dynamic configuration variable innodb_buf_dump_status_frequency
to configure how often buffer pool dump status is printed in the logs.
A number between [0, 100] that tells how oftern buffer pool dump status
in percentages should be printed. E.g. 10 means that buffer pool dump
status is printed when every 10% of number of buffer pool pages are
dumped. Default is 0 (only start and end status is printed).
Step 2:
-- Introduce temporal memory array to buffer pool where to allocate
temporary memory for encryption/compression
-- Rename PAGE_ENCRYPTION -> ENCRYPTION
-- Rename PAGE_ENCRYPTION_KEY -> ENCRYPTION_KEY
-- Rename innodb_default_page_encryption_key -> innodb_default_encryption_key
-- Allow enable/disable encryption for tables by changing
ENCRYPTION to enum having values DEFAULT, ON, OFF
-- In create table store crypt_data if ENCRYPTION is ON or OFF
-- Do not crypt tablespaces having ENCRYPTION=OFF
-- Store encryption mode to crypt_data and redo-log
MDEV-7399: Add support for INFORMATION_SCHEMA.INNODB_MUTEXES
MDEV-7618: Improve semaphore instrumentation
Introduced two new information schema tables to monitor mutex waits
and semaphore waits. Added a new configuration variable
innodb_intrument_semaphores to add thread_id, file name and
line of current holder of mutex/rw_lock.
This patch ports the work that facebook has performed
to make innochecksum handle compressed tables.
the basic idea is to use actual innodb-code to perform
checksum verification rather than duplicating in innochecksum.cc.
to make this work, innodb code has been annotated with
lots of #ifndef UNIV_INNOCHECKSUM so that it can be
compiled outside of storage/innobase.
A new testcase is also added that verifies that innochecksum
works on compressed/non-compressed tables.
Merged from commit fabc79d2ea976c4ff5b79bfe913e6bc03ef69d42
from https://code.google.com/p/google-mysql/
The actual steps to produce this patch are:
take innochecksum from 5.6.14
apply changes in innodb from facebook patches needed to make innochecksum compile
apply changes in innochecksum from facebook patches
add handcrafted testcase
The referenced facebook patches used are:
91e25120e7847fe76ea51135628a5a4dbf7c240c
innodb_stats_sample_pages
Analysis: If you set the number of analyzed pages
to very low number compared to actual pages on
that table/index it randomly pics those pages
(default 8 pages), this leads to fact that query
after analyze table returns different results. If
the index tree is small, smaller than 10 *
n_sample_pages + total_external_size, then the
estimate is ok. For bigger index trees it is
common that we do not see any borders between
key values in the few pages we pick. But still
there may be n_sample_pages different key values,
or even more. And it just tries to
approximate to n_sample_pages (8).
Fix: (1) Introduced new dynamic configuration variable
innodb_stats_sample_traditional that retains
the current design. Default false.
(2) If traditional sample is not used we use
n_sample_pages = max(min(srv_stats_sample_pages,
index->stat_index_size),
log2(index->stat_index_size)*
srv_stats_sample_pages);
(3) Introduced new dynamic configuration variable
stat_modified_counter (default = 0) if set
sets lower bound for row updates when statistics is re-estimated.
If user has provided upper bound for how many rows needs to be updated
before we calculate new statistics we use minimum of provided value
and 1/16 of table every 16th round. If no upper bound is provided
(srv_stats_modified_counter = 0, default) then calculate new statistics
if 1 / 16 of table has been modified
since the last time a statistics batch was run.
We calculate statistics at most every 16th round, since we may have
a counter table which is very small and updated very often.
@param t table
@return true if the table has changed too much and stats need to be
recalculated
*/
#define DICT_TABLE_CHANGED_TOO_MUCH(t) \
((ib_int64_t) (t)->stat_modified_counter > (srv_stats_modified_counter ? \
ut_min(srv_stats_modified_counter, (16 + (t)->stat_n_rows / 16)) : \
16 + (t)->stat_n_rows / 16))
Merge Facebook commit cd063ab930
authored by Peng Tian from https://github.com/facebook/mysql-5.6
Introduced a new configuration variable innodb_fatal_semaphore_wait_threshold,
it makes the fatal semaphore timeout configurable. Modified original commit
so that no MariaDB server files are changed, instead introduced a new
InnoDB/XtraDB configuration variable.
Its default/min/max vlaues are 600/1/2^32-1 in seconds (it was hardcoded
as 600, now its default value is 600, so the default behavior of this diff
should be no change).
Merge Facebook commit 154c579b828a60722a7d9477fc61868c07453d08
and e8f0052f9b112dc786bf9b957ed5b16a5749f7fd authored
by Steaphan Greene from https://github.com/facebook/mysql-5.6
Optimize prefix index queries to skip cluster index lookup when possible.
Currently InnoDB will always fetch the clustered index (primary key
index) for all prefix columns in an index, even when the value of a
particular record is smaller than the prefix length. This change
optimizes that case to use the record from the secondary index and avoid
the extra lookup.
Also adds two status vars that track how effective this is:
innodb_secondary_index_triggered_cluster_reads:
Times secondary index lookup triggered cluster lookup.
innodb_secondary_index_triggered_cluster_reads_avoided:
Times prefix optimization avoided triggering cluster lookup.
Merge Facebook commit 4f3e0343fd2ac3fc7311d0ec9739a8f668274f0d
authored by Steaphan Greene from https://github.com/facebook/mysql-5.6
Adds innodb_idle_flush_pct to enable tuning of the page flushing rate
when the system is relatively idle. We care about this, since doing
extra unnecessary flash writes shortens the lifespan of the flash.
New generation hard drives, SSDs and NVM devices support 4K
sector size. Supported sector size can be found using fstatvfs()
or GetDiskFreeSpace() functions.
