This patch also fixes Bug#55452 "SET PASSWORD is
replicated twice in RBR mode".
The goal of this patch is to remove the release of
metadata locks from close_thread_tables().
This is necessary to not mistakenly release
the locks in the course of a multi-step
operation that involves multiple close_thread_tables()
or close_tables_for_reopen().
On the same token, move statement commit outside
close_thread_tables().
Other cleanups:
Cleanup COM_FIELD_LIST.
Don't call close_thread_tables() in COM_SHUTDOWN -- there
are no open tables there that can be closed (we leave
the locked tables mode in THD destructor, and this
close_thread_tables() won't leave it anyway).
Make open_and_lock_tables() and open_and_lock_tables_derived()
call close_thread_tables() upon failure.
Remove the calls to close_thread_tables() that are now
unnecessary.
Simplify the back off condition in Open_table_context.
Streamline metadata lock handling in LOCK TABLES
implementation.
Add asserts to ensure correct life cycle of
statement transaction in a session.
Remove a piece of dead code that has also become redundant
after the fix for Bug 37521.
table copy".
This patch only adds test case as the bug itself was addressed
by Ramil's fix for bug 50946 "fast index creation still seems
to copy the table".
The first problem was that SHOW CREATE TRIGGER took a stronger metadata
lock than required. This caused the statement to be blocked when it was
not needed. For example, LOCK TABLE WRITE in one connection would block
SHOW CREATE TRIGGER in another connection.
Another problem was that a SHOW CREATE TRIGGER statement issued inside
a transaction did not release its metadata locks at the end of the
statement execution. This happened even if SHOW CREATE TRIGGER is an
information statement. The consequence was that SHOW CREATE TRIGGER
was able to block other connections from accessing the table
(e.g. using ALTER TABLE).
This patch fixes the problem by changing SHOW CREATE TRIGGER to take
a MDL_SHARED_HIGH_PRIO metadata lock similar to what is already done
for SHOW CREATE TABLE. The patch also changes SHOW CREATE TRIGGER to
explicitly release any metadata locks taken by the statement after
it completes.
Test case added to show_check.test.
concurrent SHOW CREATE
The problem was that a SHOW CREATE TABLE statement issued inside
a transaction did not release its metadata locks at the end of the
statement execution. This happened even if SHOW CREATE TABLE is an
information statement.
The consequence was that SHOW CREATE TABLE was able to block other
connections from accessing the table (e.g. using ALTER TABLE).
This patch fixes the problem by explicitly releasing any metadata
locks taken by SHOW CREATE TABLE after the statement completes.
Test case added to show_check.test.
and reverse() function
3 problems fixed :
1. The reported problem : caused by incorrect parsing of
the file as ucs data resulting in wrong length of the parsed
string. Fixed by truncating the invalid trailing bytes
(non-complete multibyte characters) when reading from the file
2. LOAD DATA when reading from a proper UCS2 file wasn't
recognizing the new line characters. Fixed by first looking
if a byte is a new line (or any other special) character before
reading it as a part of a multibyte character.
3. When using user variables to hold the column data in LOAD
DATA the character set of the user variable was set incorrectly
to the database charset. Fixed by setting it to the charset
specified by LOAD DATA (if any).
naming scheme for tests related to functions, rename analyse.test to
func_analyse.test (test for the ANALYSE() procedure). Avoids confusion
with the ANALYZE statement (tested in analyze.test).
The problem there is that HAVING condition evaluates const
parts of condition despite the condition has references
on aggregate functions. Table t1 became const tables
after make_join_statistics and table1.pk = 1, HAVING is
transformed into MAX(1) < 7 and taken away from HAVING.
The fix is to skip evaluation of HAVING conts parts if
HAVING condition has references on aggregate functions.
Problem: Item_str_ascii_func::val_str() did not set
charset of the returned value properly.
mysql-test/include/ctype_numconv.inc
mysql-test/r/ctype_binary.result
mysql-test/r/ctype_cp1251.result
mysql-test/r/ctype_latin1.result
mysql-test/r/ctype_ucs.result
- Adding tests
sql/item_strfunc.cc
- Adding initialization of charset
from mysql-next-mr-opt-backporting.
Bug#54515: Crash in opt_range.cc::get_best_group_min_max on
SELECT from VIEW with GROUP BY
When handling the grouping items in get_best_group_min_max, the
items need to be of type Item_field. In this bug, an ASSERT
triggered because the item used for grouping was an
Item_direct_view_ref (i.e., the group column is from a view).
The fix is to get the real_item since Item_ref* pointing to
Item_field is ok.
Problem: sha2() reported its result as BINARY
Fix:
- Inheriting Item_func_sha2 from Item_str_ascii_func
- Setting max_length via fix_length_and_charset()
instead of direct assignment.
- Adding tests
Problem: Item_copy did not set "fixed", which resulted in DBUG_ASSERT in some cases.
Fix: adding initialization of the "fixed" member
Adding tests:
mysql-test/include/ctype_numconv.inc
mysql-test/r/ctype_binary.result
mysql-test/r/ctype_cp1251.result
mysql-test/r/ctype_latin1.result
mysql-test/r/ctype_ucs.result
Adding initialization of the "fixed" member:
sql/item.h
value and NO_ZERO_DATE
The problem was that a older version of the error path for a
failed admin statement relied upon a few error conditions being
met in order to access a table handler, the first one being that
the table object pointer was not NULL. Probably due to chance,
in all cases a table object was closed but the reference wasn't
reset, the other conditions didn't evaluate to true. With the
addition of a new check on the error path, the handler started
being dereferenced whenever it was not reset to NULL, causing
problems for code paths which closed the table but didn't reset
the reference.
The solution is to reset the reference whenever a admin statement
fails and the tables are closed.
This assert checks that the server does not try to send EOF to the
client if there has been some error during processing. This to make
sure that the error is in fact sent to the client.
The problem was that any errors during processing of WHERE conditions
in HANDLER ... READ statements where not detected by the handler code.
The handler code therefore still tried to send EOF to the client,
triggering the assert. The bug was only noticeable in debug builds.
This patch fixes the problem by making sure that the handler code
checks for errors during condition processing and acts accordingly.
MERGE engine".
Backport the patch from 6.0 by Ingo Struewing:
revid:ingo.struewing@sun.com-20091028183659-6kmv1k3gdq6cpg4d
Bug#36171 - CREATE TEMPORARY TABLE and MERGE engine
In former MySQL versions, up to 5.1.23/6.0.4 it was possible to create
temporary MERGE tables with non-temporary MyISAM tables.
This has been changed in the mentioned version due to Bug 19627
(temporary merge table locking). MERGE children were locked through
the parent table. If the parent was temporary, it was not locked and
so the children were not locked either. Parallel use of the MyISAM
tables corrupted them.
Since 6.0.6 (WL 4144 - Lock MERGE engine children), the children are
locked independently from the parent. Now it is possible to allow
non-temporary children with a temporary parent. Even though the
temporary MERGE table itself is not locked, each non-temporary
MyISAM table is locked anyway.
NOTE: Behavior change: In 5.1.23/6.0.4 we prohibited non-temporary
children with a temporary MERGE table. Now we re-allow it.
An important side-effect is that temporary tables, which overlay
non-temporary MERGE children, overlay the children in the MERGE table.
and a backport of relevant changes from the 6.0
version of the fix done by Ingo Struewing.
The bug itself was fixed by the patch for Bug#54811.
MyISAMMRG engine would try to use MMAP on its children
even on platforms that don't support it and even if
myisam_use_mmap option was off.
This lead to an infinite hang in INSERT ... SELECT into
a MyISAMMRG table when the destination MyISAM table
was also selected from.
A bug in duplicate detection fixed by 54811 was essential to
the hang - when a duplicate is detected, the optimizer
disables the use of memory mapped files, and it wasn't the case.
The patch below is also to not turn on MMAP on children tables
if myisam_use_mmap is off.
A test case is added to cover MyISAMMRG and myisam_use_mmap
option.
with open HANDLER
Fixes a problem with schema.test visible using embedded server.
The HANDLER was not closed which caused the test to hang.
The problem was not visible if the test was run on a normal server
as the the handler there was implicitly closed by DATABASE DDL
statements doing Events::drop_schema_events().
with open HANDLER
Fixes problem which caused mdl_sync.test to fail on Solaris and
Windows due to path name differences in error messages in the
result file.
DATABASE with open HANDLER"
Remove LOCK_create_db, database name locks, and use metadata locks instead.
This exposes CREATE/DROP/ALTER DATABASE statements to the graph-based
deadlock detector in MDL, and paves the way for a safe, deadlock-free
implementation of RENAME DATABASE.
Database DDL statements will now take exclusive metadata locks on
the database name, while table/view/routine DDL statements take
intention exclusive locks on the database name. This prevents race
conditions between database DDL and table/view/routine DDL.
(e.g. DROP DATABASE with concurrent CREATE/ALTER/DROP TABLE)
By adding database name locks, this patch implements
WL#4450 "DDL locking: CREATE/DROP DATABASE must use database locks" and
WL#4985 "DDL locking: namespace/hierarchical locks".
The patch also changes code to use init_one_table() where appropriate.
The new lock_table_names() function requires TABLE_LIST::db_length to
be set correctly, and this is taken care of by init_one_table().
This patch also adds a simple template to help work with
the mysys HASH data structure.
Most of the patch was written by Konstantin Osipov.
Fixed an incomplete historical ALTER TABLE MODIFY trimming the trigger
privilege bit from mysql.tables_priv.Table_priv column.
Removed the duplicate ALTER TABLE MODIFY.
Test suite added.
Remove mysql_lock_have_duplicate(), since now we always
have TABLE_LIST objects for MyISAMMRG children
in lex->query_tables and keep it till the end of the
statement (sub-statement).
This bug is a consequence of WL#5349, as the
default storage engine was changed.
The fix was to explicitly add an ENGINE
clause to a CREATE TABLE statement, to
ensure that we test case preservement on
MyISAM.
The problem was that if a query accessing a view was blocked due to
conflicting locks on tables in the view definition, it would be possible
for a different connection to alter the view definition before the view
query completed. When the view query later resumed, it used the old view
definition. This meant that if the view query was later repeated inside
the same transaction, the two executions of the query would give different
results, thus breaking repeatable read. (The first query used the old
view definition, the second used the new view definition).
This bug is no longer repeatable with the recent changes to the metadata
locking subsystem (revno: 3040). The view query will no longer back-off
and release the lock on the view definiton. Instead it will wait for
the conflicting lock(s) to go away while keeping the view definition lock.
This means that it is no longer possible for a concurrent connection to
alter the view definition. Instead, any such attempt will be blocked.
In the case from the bug report where the same view query was executed
twice inside the same transaction, any ALTER VIEW from other connections
will now be blocked until the transaction has completed (or aborted).
The view queries will therefore use the same view definition and we will
have repeatable read.
Test case added to innodb_mysql_lock.test.
This patch contains no code changes.
Bug#47633 - assert in ha_myisammrg::info during OPTIMIZE
The server crashed on an attempt to optimize a MERGE table with
non-existent child table.
mysql_admin_table() relied on the table to be successfully open
if a table object had been allocated.
Changed code to check return value of the open function before
calling a handler:: function on it.
returns nothing
When looking for table or database names inside INFORMATION_SCHEMA
we must convert the table and database names to lowercase (just as it's
done in the rest of the server) when lowercase_table_names is non-zero.
This will allow us to find the same tables that we would find if there
is no condition.
Fixed by converting to lower case when extracting the database and
table name conditions.
Test case added.
The problem is that QUICK_SELECT_DESC behaviour depends
on used_key_parts value which can be bigger than selected
best_key_parts value if an engine supports clustered key.
But used_key_parts is overwritten with best_key_parts
value that prevents from correct selection of index
access method. The fix is to preserve used_key_parts
value for further use in QUICK_SELECT_DESC.
This deadlock happened if DROP DATABASE was blocked due to an open
HANDLER table from a different connection. While DROP DATABASE
is blocked, it holds the LOCK_mysql_create_db mutex. This results
in a deadlock if the connection with the open HANDLER table tries
to execute a CREATE/ALTER/DROP DATABASE statement as they all
try to acquire LOCK_mysql_create_db.
This patch makes this deadlock scenario very unlikely by closing and
marking for re-open all HANDLER tables for which there are pending
conflicing locks, before LOCK_mysql_create_db is acquired.
However, there is still a very slight possibility that a connection
could access one of these HANDLER tables between closing/marking for
re-open and the acquisition of LOCK_mysql_create_db.
This patch is for 5.1 only, a separate and complete fix will be
made for 5.5+.
Test case added to schema.test.
During creation of the table list of
processed tables hidden I_S table 'VARIABLES'
is erroneously added into the table list.
it leads to ER_UNKNOWN_TABLE error in
TABLE_LIST::add_table_to_list() function.
The fix is to skip addition of hidden I_S
tables into the table list.
The assert was triggered if a connection executing TRUNCATE
on a InnoDB table was killed during open_tables.
This bug was fixed in the scope of Bug #45643
"InnoDB does not support replication of TRUNCATE TABLE".
This patch adds test coverage to innodb_mysql_sync.test.
