This has been back-ported from 6.0 as the problems proved to afflict
5.1 as well.
The fix exposed two new bugs. They were reported as follows.
Bug no 52174: Sometimes wrong plan when reading a MAX value
from non-NULL index
Bug no 52173: Reading NULL value from non-NULL index gives wrong
result in embedded server
Both bugs taken together affect a much smaller class of queries than #47762,
so the fix stays for now.
NULL column for NULL
The optimization to read MIN() and MAX() values from an
index did not properly handle comparisons with NULL
values. Fixed by giving up the particular optimization step
if there are non-NULL safe comparisons with NULL values, as
the result is NULL anyway.
Also, Oracle copyright notice was added to all files.
The problem is that not all column names retrieved from a SELECT
statement can be used as view column names due to length and format
restrictions. The server failed to properly check the conformity
of those automatically generated column names before storing the
final view definition on disk.
Since columns retrieved from a SELECT statement can be anything
ranging from functions to constants values of any format and length,
the solution is to rewrite to a pre-defined format any names that
are not acceptable as a view column name.
The name is rewritten to "Name_exp_%u" where %u translates to the
position of the column. To avoid this conversion scheme, define
explict names for the view columns via the column_list clause.
Also, aliases are now only generated for top level statements.
mysql-test/include/view_alias.inc:
Add test case for Bug#40277
mysql-test/r/compare.result:
Bug#40277: SHOW CREATE VIEW returns invalid SQL
mysql-test/r/group_by.result:
Bug#40277: SHOW CREATE VIEW returns invalid SQL
mysql-test/r/ps.result:
Bug#40277: SHOW CREATE VIEW returns invalid SQL
mysql-test/r/subselect.result:
Bug#40277: SHOW CREATE VIEW returns invalid SQL
mysql-test/r/subselect3.result:
Bug#40277: SHOW CREATE VIEW returns invalid SQL
mysql-test/r/type_datetime.result:
Bug#40277: SHOW CREATE VIEW returns invalid SQL
mysql-test/r/union.result:
Bug#40277: SHOW CREATE VIEW returns invalid SQL
mysql-test/r/view.result:
Add test case result for Bug#40277
mysql-test/r/view_alias.result:
Add test case result for Bug#40277
mysql-test/t/view_alias.test:
Add test case for Bug#40277
sql/sql_view.cc:
Check if auto generated column names are conforming. Also, the
make_unique_view_field_name function is not used as it uses the
original name to construct a new one, which does not work if the
name is invalid.
backporting of bug@30703 to 5.1.
The fixes are backed up with a regression test.
mysql-test/include/test_fieldsize.inc:
waiting to stop is to be actually exclusively for SQL thread.
mysql-test/suite/rpl/r/rpl_show_slave_running.result:
new results file is added.
mysql-test/suite/rpl/t/rpl_show_slave_running.test:
regression test for bug#30703 is added.
sql/mysqld.cc:
refining `show status like slave_running' handler to correspond to one of
`show slave status'.
sql/slave.cc:
A dbug-sync point is added to complement the regression test.
write()/read()
Sometimes stop/restart master or stop/restart salve can cause
network error, which can cause the 'invalid file descriptor
-1 in syscall write()/read()' warnings. All involved test
cases except rpl_slave_load_remove_tmpfile belong to the
kind of network error. So they are expected.
The 'rpl_slave_load_remove_tmpfile' belongs to file error,
but it is testing the file error as following code:
DBUG_EXECUTE_IF("remove_slave_load_file_before_write",
my_close(fd,MYF(0)); fd= -1; my_delete(fname, MYF(0)););
So it's expected too.
To fix the problem, add the valgrind warnings to the global
suppression list to suppress it.
mysql-test/include/mtr_warnings.sql:
Added code to suppress valgrind warnings: invalid file
descriptor -1 in syscall write()/read().
The test case rpl_binlog_corruption fails on windows because when
adding a line to the binary log index file it gets terminated
with a CR+LF (which btw, is the normal case in windows, but not on
Unixes - LF). This causes mismatch between the relay log names,
causing mysqld to report that it cannot find the log file.
We fix this by creating the instrumented index file through
mysql, ie, using SELECT ... INTO DUMPFILE ..., as opposed on
relying on ultimatly OS commands like: -- echo "..." >
index. These changes go into the file and make the procedure
platform independent:
include/setup_fake_relay_log.inc
Side note: when using SELECT ... INTO DUMPFILE ..., one needs to
check if mysqld is running with secure_file_priv. If it is, we do
it in two steps: 1. create the file on the allowed location;
2. move it to the datadir. If it is not, then we just create the
file directly on the datadir (so previous step 2. is not needed).
Manually deleteing one or more entries from 'master-bin.index', will
cause master infinitely loop to send one binlog file.
When starting a dump session, master opens index file and search the binlog file
which is being requested by the slave. The position of the binlog file in the
index file is recorded. it will be used to find the next binlog file when current
binlog file has dumped completely. As only the position is used, it may
not get the correct file if some entries has been removed manually from the index file.
the master will reopen the current binlog file which has been dump completely
and redump it if it can not get the next binlog file's name from index file.
It obviously is a logical error.
Even though it is allowed to manually change index file,
but it is not recommended. so after this patch, master
sends a fatal error to slave and close the dump session if a new binlog file
has been generated and master can not get it from the index file.
mysql-test/include/kill_query.inc:
Error 1034 can be generated when change MyISAM table indexes was interrupted
mysql-test/r/rpl_killed_ddl.result:
table t4 may not exists because the ALTER above was interrupted
mysql-test/t/rpl_killed_ddl.test:
table t4 may not exists because the ALTER above was interrupted
BUG#47983: rpl_extraColmaster_myisam failed in PB2 with "Found
warnings!!"
BUG 45214 fixed the case when get_master_version_and_clock
function, used by the slave, would not report errors. The slave
now detects them and if related to transient network failures, it
prints some warnings and retries to connect. On the other hand,
if not network related, it just gives up and fails.
As such, sometimes, in PB2, the slave comes across some transient
communication issues between master and slave, while calling
get_master_version_and_clock, causing warnings print outs to the
error log. Nevertheless, in such cases slave retries to connect,
in which it succeeds, and the test case continues as it normally
would. But then, at the end of a successful test run, MTR checks
the error log, finds the unexpected warnings and considers them
harmful. This causes MTR to report error and, consequently, PB2
to report a failing test.
We fix this by adding to the global warnings suppress list the
warnings related to transient network failures only, which are
reported while in function get_master_version_and_clock.
Problem 1:
column_priv_hash uses utf8_general_ci collation
for the key comparison. The key consists of user name,
db name and table name. Thus user with privileges on table t1
is able to perform the same operation on T1
(the similar situation with user name & db name, see acl_cache).
So collation which is used for column_priv_hash and acl_cache
should be case sensitive.
The fix:
replace system_charset_info with my_charset_utf8_bin for
column_priv_hash and acl_cache
Problem 2:
The same situation with proc_priv_hash, func_priv_hash,
the only difference is that Routine name is case insensitive.
So the fix is to use my_charset_utf8_bin for
proc_priv_hash & func_priv_hash and convert routine name into lower
case before writing the element into the hash and
before looking up the key.
Additional fix: mysql.procs_priv Routine_name field collation
is changed to utf8_general_ci.
It's necessary for REVOKE command
(to find a field by routine hash element values).
Note:
It's safe for lower-case-table-names mode too because
db name & table name are converted into lower case
(see GRANT_NAME::GRANT_NAME).
mysql-test/include/have_case_insensitive_fs.inc:
test case
mysql-test/r/case_insensitive_fs.require:
test case
mysql-test/r/grant_lowercase_fs.result:
test result
mysql-test/r/lowercase_fs_off.result:
test result
mysql-test/r/ps_grant.result:
test result
mysql-test/r/system_mysql_db.result:
changed Routine_name field collation to case insensitive
mysql-test/t/grant_lowercase_fs.test:
test case
mysql-test/t/lowercase_fs_off.test:
test case
scripts/mysql_system_tables.sql:
changed Routine_name field collation to case insensitive
scripts/mysql_system_tables_fix.sql:
changed Routine_name field collation to case insensitive
sql/sql_acl.cc:
Problem 1:
column_priv_hash uses utf8_general_ci collation
for the key comparison. The key consists of user name,
db name and table name. Thus user with privileges on table t1
is able to perform the same operation on T1
(the similar situation with user name & db name, see acl_cache).
So collation which is used for column_priv_hash and acl_cache
should be case sensitive.
The fix:
replace system_charset_info with my_charset_utf8_bin for
column_priv_hash and acl_cache
Problem 2:
The same situation with proc_priv_hash, func_priv_hash,
the only difference is that Routine name is case insensitive.
So the fix is to use my_charset_utf8_bin for
proc_priv_hash & func_priv_hash and convert routine name into lower
case before writing the element into the hash and
before looking up the key.
Additional fix: mysql.procs_priv Routine_name field collation
is changed to utf8_general_ci.
It's necessary for REVOKE command
(to find a field by routine hash element values).
Note:
It's safe for lower-case-table-names mode too because
db name & table name are converted into lower case
(see GRANT_NAME::GRANT_NAME).
- Remove the "hack" from mtr.pl that skipped searching for the .dll files
when embedded and windows. Now the variables will be preoperly initialized.
- Make the tests detect that they can't run on windows+embedded
Mask part of EXPLAIN output with '#' to account for varying row count estimation.
mysql-test/include/mix1.inc:
Mask 'rows' column in EXPLAIN output (number varies sometimes between 1 and 2).
mysql-test/r/innodb_mysql.result:
Update result file after masking of rows estimation in EXPLAIN output.
Backport from 6.0 to 5.1.
Only those sync points are included, which are used in debug_sync.test.
The Debug Sync Facility allows to place synchronization points
in the code:
open_tables(...)
DEBUG_SYNC(thd, "after_open_tables");
lock_tables(...)
When activated, a sync point can
- Send a signal and/or
- Wait for a signal
Nomenclature:
- signal: A value of a global variable that persists
until overwritten by a new signal. The global
variable can also be seen as a "signal post"
or "flag mast". Then the signal is what is
attached to the "signal post" or "flag mast".
- send a signal: Assign the value (the signal) to the global
variable ("set a flag") and broadcast a
global condition to wake those waiting for
a signal.
- wait for a signal: Loop over waiting for the global condition until
the global value matches the wait-for signal.
Please find more information in the top comment in debug_sync.cc
or in the worklog entry.
.bzrignore:
WL#4259 - Debug Sync Facility
Added the symbolic link libmysqld/debug_sync.cc.
CMakeLists.txt:
WL#4259 - Debug Sync Facility
Added definition for ENABLED_DEBUG_SYNC.
configure.in:
WL#4259 - Debug Sync Facility
Added definition for ENABLED_DEBUG_SYNC.
include/my_sys.h:
WL#4259 - Debug Sync Facility
Added definition for the DEBUG_SYNC_C macro.
libmysqld/CMakeLists.txt:
WL#4259 - Debug Sync Facility
Added sql/debug_sync.cc.
libmysqld/Makefile.am:
WL#4259 - Debug Sync Facility
Added sql/debug_sync.cc.
mysql-test/include/have_debug_sync.inc:
WL#4259 - Debug Sync Facility
New include file.
mysql-test/mysql-test-run.pl:
WL#4259 - Debug Sync Facility
Added option --debug_sync_timeout.
mysql-test/r/debug_sync.result:
WL#4259 - Debug Sync Facility
New test result.
mysql-test/r/have_debug_sync.require:
WL#4259 - Debug Sync Facility
New require file.
mysql-test/t/debug_sync.test:
WL#4259 - Debug Sync Facility
New test file.
mysys/my_static.c:
WL#4259 - Debug Sync Facility
Added definition for debug_sync_C_callback_ptr.
mysys/thr_lock.c:
WL#4259 - Debug Sync Facility
Added sync point "wait_for_lock".
sql/CMakeLists.txt:
WL#4259 - Debug Sync Facility
Added debug_sync.cc and debug_sync.h.
sql/Makefile.am:
WL#4259 - Debug Sync Facility
Added debug_sync.cc and debug_sync.h.
sql/debug_sync.cc:
WL#4259 - Debug Sync Facility
New source file.
sql/debug_sync.h:
WL#4259 - Debug Sync Facility
New header file.
sql/mysqld.cc:
WL#4259 - Debug Sync Facility
Added opt_debug_sync_timeout.
Added calls to debug_sync_init() and debug_sync_end().
Fixed a purecov comment (unrelated).
sql/set_var.cc:
WL#4259 - Debug Sync Facility
Added server variable "debug_sync".
sql/set_var.h:
WL#4259 - Debug Sync Facility
Added declaration for server variable "debug_sync".
sql/share/errmsg.txt:
WL#4259 - Debug Sync Facility
Added error messages ER_DEBUG_SYNC_TIMEOUT and ER_DEBUG_SYNC_HIT_LIMIT.
sql/sql_base.cc:
WL#4259 - Debug Sync Facility
Added sync points "after_flush_unlock" and "before_lock_tables_takes_lock".
sql/sql_class.cc:
WL#4259 - Debug Sync Facility
Added initialization for debug_sync_control to THD::THD.
Added calls to debug_sync_init_thread() and debug_sync_end_thread().
sql/sql_class.h:
WL#4259 - Debug Sync Facility
Added element debug_sync_control to THD.
storage/myisam/myisamchk.c:
Fixed a typo in an error message string (unrelated).
All statements executed by mysql_upgrade are binlogged and then are replicated to slave.
This will result in some errors. The report of this bug has demonstrated some examples.
Master and slave should be upgraded separately. All statements executed by
mysql_upgrade will not be binlogged.
--write-binlog and --skip-write-binlog options are added into mysql_upgrade.
These options control whether sql statements are binlogged or not.
Invalid (old?) table or database name in logs
Problem was still not completely fixed, due to
qouting.
This is the server side only fix (in explain_filename),
the change from filename_to_tablename to use explain_filename
in the InnoDB code must be done before the bug is
fixed.
mysql-test/include/have_not_innodb_plugin.inc:
Bug#32430: 'show innodb status' causes errors
Invalid (old?) table or database name in logs
Added include file to allow test for only the
'old' built-in innodb engine
mysql-test/r/not_true.require:
Bug#32430: 'show innodb status' causes errors
Invalid (old?) table or database name in logs
Added require to match 'not' TRUE
mysql-test/r/partition_innodb_builtin.result:
Bug#32430: 'show innodb status' causes errors
Invalid (old?) table or database name in logs
New result file for partitioning specific to
the 'old' built-in innodb engine
mysql-test/r/partition_innodb_plugin.result:
Bug#32430: 'show innodb status' causes errors
Invalid (old?) table or database name in logs
New result file for partitioning specific to
the new plugin innodb engine
mysql-test/t/disabled.def:
Bug#32430: 'show innodb status' causes errors
Invalid (old?) table or database name in logs
Disabling the new test until the fix is
included in the InnoDB source too.
mysql-test/t/partition_innodb_builtin.test:
Bug#32430: 'show innodb status' causes errors
Invalid (old?) table or database name in logs
New test file for partitioning specific to
the 'old' built-in innodb engine
mysql-test/t/partition_innodb_plugin.test:
Bug#32430: 'show innodb status' causes errors
Invalid (old?) table or database name in logs
New test file for partitioning specific to
the new plugin innodb engine
sql/mysql_priv.h:
Bug#32430: 'show innodb status' causes errors
Invalid (old?) table or database name in logs
Added thd as a parameter to explain_filename
to be able to use the correct quote character
sql/sql_table.cc:
Bug#32430: 'show innodb status' causes errors
Invalid (old?) table or database name in logs
Changed explain_filename, so that it does qouting
correctly according to the sessions qoute char.
The plugin feature is disabled, you need HAVE_DLOPEN
Selectively skip tests that require dynamic loading (ie: static builds).
mysql-test/include/have_dynamic_loading.inc:
Add require file.
mysql-test/t/ps_not_windows.test:
Test requires dynamic loading support.
binlog
Mixing transactional (T) and non-transactional (N) tables on behalf of a
transaction may lead to inconsistencies among masters and slaves in STATEMENT
mode. The problem stems from the fact that although modifications done to
non-transactional tables on behalf of a transaction become immediately visible
to other connections they do not immediately get to the binary log and therefore
consistency is broken. Although there may be issues in mixing T and M tables in
STATEMENT mode, there are safe combinations that clients find useful.
In this bug, we fix the following issue. Mixing N and T tables in multi-level
(e.g. a statement that fires a trigger) or multi-table table statements (e.g.
update t1, t2...) were not handled correctly. In such cases, it was not possible
to distinguish when a T table was updated if the sequence of changes was N and T.
In a nutshell, just the flag "modified_non_trans_table" was not enough to reflect
that both a N and T tables were changed. To circumvent this issue, we check if an
engine is registered in the handler's list and changed something which means that
a T table was modified.
Check WL 2687 for a full-fledged patch that will make the use of either the MIXED or
ROW modes completely safe.
mysql-test/suite/binlog/r/binlog_row_mix_innodb_myisam.result:
Truncate statement is wrapped in BEGIN/COMMIT.
mysql-test/suite/binlog/r/binlog_stm_mix_innodb_myisam.result:
Truncate statement is wrapped in BEGIN/COMMIT.
Problem was that the partition containing NULL values
was pruned away, since '2001-01-01' < '2001-02-00' but
TO_DAYS('2001-02-00') is NULL.
Added the NULL partition for RANGE/LIST partitioning on TO_DAYS()
function to be scanned too.
Also fixed a bug that added ALLOW_INVALID_DATES to sql_mode
(SELECT * FROM t WHERE date_col < '1999-99-99' on a RANGE/LIST
partitioned table would add it).
mysql-test/include/partition_date_range.inc:
Bug#20577: Partitions: use of to_days() function leads to selection failures
Added include file to decrease test code duplication
mysql-test/r/partition_pruning.result:
Bug#20577: Partitions: use of to_days() function leads to selection failures
Added test results
mysql-test/r/partition_range.result:
Bug#20577: Partitions: use of to_days() function leads to selection failures
Updated test result.
This fix adds the partition containing NULL values to
the list of partitions to be scanned.
mysql-test/t/partition_pruning.test:
Bug#20577: Partitions: use of to_days() function leads to selection failures
Added test case
sql/item.h:
Bug#20577: Partitions: use of to_days() function leads to selection failures
Added MONOTONIC_*INCREASE_NOT_NULL values to be used by TO_DAYS.
sql/item_timefunc.cc:
Bug#20577: Partitions: use of to_days() function leads to selection failures
Calculate the number of days as return value even for invalid dates.
This is so that pruning can be used even for invalid dates.
sql/opt_range.cc:
Bug#20577: Partitions: use of to_days() function leads to selection failures
Fixed a bug that added ALLOW_INVALID_DATES to sql_mode
(SELECT * FROM t WHERE date_col < '1999-99-99' on a RANGE/LIST
partitioned table would add it).
sql/partition_info.h:
Bug#20577: Partitions: use of to_days() function leads to selection failures
Resetting ret_null_part when a single partition is to be used, this
to avoid adding the NULL partition.
sql/sql_partition.cc:
Bug#20577: Partitions: use of to_days() function leads to selection failures
Always include the NULL partition if RANGE or LIST.
Use the returned value for the function for pruning, even if
it is marked as NULL, so that even '2000-00-00' can be
used for pruning, even if TO_DAYS('2000-00-00') is NULL.
Changed == to >= in get_next_partition_id_list to avoid
crash if part_iter->part_nums is not correctly setup.
Replication SQL thread does not set database default charset to
thd->variables.collation_database properly, when executing LOAD DATA binlog.
This bug can be repeated by using "LOAD DATA" command in STATEMENT mode.
This patch adds code to find the default character set of the current database
then assign it to thd->db_charset when slave server begins to execute a relay log.
The test of this bug is added into rpl_loaddata_charset.test
Install procedure does not copy *.inc files located under the mysql-test/t directory.
Therefore, this patch moves the rpl_trigger.inc to the mysql-test/include directory.
1. BUG#21704 - Renaming column does not update FK definition
2. Changes in mysql-test/include/mtr_warnings.sql so that the testcase
for BUG#21704 doesn't fail because of the warnings generated.
Detailed revision comments:
r5488 | vasil | 2009-07-09 19:16:44 +0300 (Thu, 09 Jul 2009) | 13 lines
branches/5.1:
Fix Bug#21704 Renaming column does not update FK definition
by checking whether a column that participates in a FK definition is being
renamed and denying the ALTER in this case.
The patch was originally developed by Davi Arnaut <Davi.Arnaut@Sun.COM>:
http://lists.mysql.com/commits/77714
and was later adjusted to conform to InnoDB coding style by me (Vasil),
I also added some more comments and moved the bug specific mysql-test to
a separate file to make it more manageable and flexible.
