It is not sufficient to check that the CPU supports the necessary
instructions. Also the operating system (or virtual machine hypervisor)
must enable all the AVX registers to be saved and restored on a
context switch.
Because clang 8 does not support the compiler intrinsic _xgetbv()
we will require clang 9 or later for enabling the use of VPCLMULQDQ
and the related AVX512 features.
Line numbers had to be removed from the ignorelists in order to be
diffed against since locations of the same findings can differ
across runs. Therefore preprocessing has to be done on the CI findings
so that it can be compared to the ignorelist and new findings can be
outputted. However, since line numbers have to be removed, a situation
occurs where it is difficult to reference the location of findings
in code given the output of the CI job.
To lessen this pain, change the cppcheck template to include
code snippets which make it easier to reference where in the code
the finding is referring to, even in the absence of line numbers.
Ignorelisting works as before since locations of the finding may
change but not the code it is referring to.
Furthermore, due to the innate difficulty in maintaining ignorelists
across branches and triaging new findings, allow failure as to not
have constantly failing pipelines as a result of a new findings that
have not been addressed yet.
Lastly, update SAST ignorelists to match the newly refactored cppcheck
job and the current state of the codebase.
All new code of the whole pull request, including one or several
files that are either new files or modified ones, are contributed
under the BSD-new license. I am contributing on behalf of my
employer Amazon Web Services, Inc.
Rectify cases of mismatched brackets and address
possible cases of division by zero by checking if
the denominator is zero before dividing.
No functional changes were made.
All new code of the whole pull request, including one or several
files that are either new files or modified ones, are contributed
under the BSD-new license. I am contributing on behalf of my
employer Amazon Web Services, Inc.
MariaDB supports a "wait-free concurrent allocator based on pinning addresses".
In `lf_pinbox_real_free()` it tries to sort the pinned addresses for better
performance to use binary search during "real free". `alloca()` was used to
allocate stack memory and copy addresses.
To prevent a stack overflow when allocating the stack memory the function checks
if there's enough stack space. However, the available stack size was calculated
inaccurately which eventually caused database crash due to stack overflow.
The crash was seen on MariaDB 10.6.11 but the same code defect exists on all
MariaDB versions.
A similar issue happened previously and the fix in fc2c1e43 was to add a
`ALLOCA_SAFETY_MARGIN` which is 8192 bytes. However, that safety margin is not
enough during high connection workloads.
MySQL also had a similar issue and the fix
https://github.com/mysql/mysql-server/commit/b086fda was to remove the use of
`alloca` and replace qsort approach by a linear scan through all pointers (pins)
owned by each thread.
This commit is mostly the same as it is the only way to solve this issue as:
1. Frame sizes in different architecture can be different.
2. Number of active (non-null) pinned addresses varies, so the frame
size for the recursive sorting function `msort_with_tmp` is also hard
to predict.
3. Allocating big memory blocks in stack doesn't seem to be a very good
practice.
For further details see the mentioned commit in MySQL and the inline comments.
All new code of the whole pull request, including one or several files
that are either new files or modified ones, are contributed under the
BSD-new license. I am contributing on behalf of my employer Amazon Web
Services, Inc.
We have an issue if a user have the following in a configuration file:
log_slow_filter="" # Log everything to slow query log
log_queries_not_using_indexes=ON
This set log_slow_filter to 'not_using_index' which disables
slow_query_logging of most queries.
In effect, on should never use log_slow_filter="" in config files but
instead use log_slow_filter=ALL.
Fixed by changing log_slow_filter="" that comes either from a
configuration file or from the command line, when starting to the server,
to log_slow_filter=ALL.
A warning will be printed when this happens.
Other things:
- One can now use =ALL for any 'set' variable to set all options at once.
(backported from 10.6)
Apart from better performance when accessing thread local variables,
we'll get rid of things that depend on initialization/cleanup of
pthread_key_t variables.
Where appropriate, use compiler-dependent pre-C++11 thread-local
equivalents, where it makes sense, to avoid initialization check overhead
that non-static thread_local can suffer from.
In cmake -DWITH_UBSAN=ON builds with clang but not with GCC,
-fsanitize=undefined will flag several runtime errors on
function pointer mismatch related to the lock-free hash table LF_HASH.
Let us use matching function signatures and remove function pointer
casts in order to avoid potential bugs due to undefined behaviour.
These errors could be caught at compilation time by
-Wcast-function-type-strict, which is available starting with clang-16,
but not available in any version of GCC as of now. The old GCC flag
-Wcast-function-type is enabled as part of -Wextra, but it specifically
does not catch these errors.
Reviewed by: Vladislav Vaintroub
In commit 9ec7819c58 the CRC-32 function
signatures had been unified somewhat, but not enough.
clang -fsanitize=undefined would flag a function pointer signature
mismatch between const char* and const void*, but not between
uint32_t and unsigned. We try to fix both inconsistencies anyway.
Reviewed by: Vladislav Vaintroub
EE_ numbers occupy the same range as OS Exxx errors and
my_errno is generally for OS errors. And for HA_ERR_ handler errors
which occupy a different range, so can be freely mixed with OS errors.
Two new variables added:
- max_tmp_space_usage : Limits the the temporary space allowance per user
- max_total_tmp_space_usage: Limits the temporary space allowance for
all users.
New status variables: tmp_space_used & max_tmp_space_used
New field in information_schema.process_list: TMP_SPACE_USED
The temporary space is counted for:
- All SQL level temporary files. This includes files for filesort,
transaction temporary space, analyze, binlog_stmt_cache etc.
It does not include engine internal temporary files used for repair,
alter table, index pre sorting etc.
- All internal on disk temporary tables created as part of resolving a
SELECT, multi-source update etc.
Special cases:
- When doing a commit, the last flush of the binlog_stmt_cache
will not cause an error even if the temporary space limit is exceeded.
This is to avoid giving errors on commit. This means that a user
can temporary go over the limit with up to binlog_stmt_cache_size.
Noteworthy issue:
- One has to be careful when using small values for max_tmp_space_limit
together with binary logging and with non transactional tables.
If a the binary log entry for the query is bigger than
binlog_stmt_cache_size and one hits the limit of max_tmp_space_limit
when flushing the entry to disk, the query will abort and the
binary log will not contain the last changes to the table.
This will also stop the slave!
This is also true for all Aria tables as Aria cannot do rollback
(except in case of crashes)!
One way to avoid it is to use @@binlog_format=statement for
queries that updates a lot of rows.
Implementation:
- All writes to temporary files or internal temporary tables, that
increases the file size, are routed through temp_file_size_cb_func()
which updates and checks the temp space usage.
- Most of the temporary file monitoring is done inside IO_CACHE.
Temporary file monitoring is done inside the Aria engine.
- MY_TRACK and MY_TRACK_WITH_LIMIT are new flags for ini_io_cache().
MY_TRACK means that we track the file usage. TRACK_WITH_LIMIT means
that we track the file usage and we give an error if the limit is
breached. This is used to not give an error on commit when
binlog_stmp_cache is flushed.
- global_tmp_space_used contains the total tmp space used so far.
This is needed quickly check against max_total_tmp_space_usage.
- Temporary space errors are using EE_LOCAL_TMP_SPACE_FULL and
handler errors are using HA_ERR_LOCAL_TMP_SPACE_FULL.
This is needed until we move general errors to it's own error space
so that they cannot conflict with system error numbers.
- Return value of my_chsize() and mysql_file_chsize() has changed
so that -1 is returned in the case my_chsize() could not decrease
the file size (very unlikely and will not happen on modern systems).
All calls to _chsize() are updated to check for > 0 as the error
condition.
- At the destruction of THD we check that THD::tmp_file_space == 0
- At server end we check that global_tmp_space_used == 0
- As a precaution against errors in the tmp_space_used code, one can set
max_tmp_space_usage and max_total_tmp_space_usage to 0 to disable
the tmp space quota errors.
- truncate_io_cache() function added.
- Aria tables using static or dynamic row length are registered in 8K
increments to avoid some calls to update_tmp_file_size().
Other things:
- Ensure that all handler errors are registered. Before, some engine
errors could be printed as "Unknown error".
- Fixed bug in filesort() that causes a assert if there was an error
when writing to the temporay file.
- Fixed that compute_window_func() now takes into account write errors.
- In case of parallel replication, rpl_group_info::cleanup_context()
could call trans_rollback() with thd->error set, which would cause
an assert. Fixed by resetting the error before calling trans_rollback().
- Fixed bug in subselect3.inc which caused following test to use
heap tables with low value for max_heap_table_size
- Fixed bug in sql_expression_cache where it did not overflow
heap table to Aria table.
- Added Max_tmp_disk_space_used to slow query log.
- Fixed some bugs in log_slow_innodb.test
- FLUSH GLOBAL STATUS now resets most global_status_vars.
At this stage, this is mainly to be used for testing.
- FLUSH SESSION STATUS added as an alias for FLUSH STATUS.
- FLUSH STATUS does not require any privilege (before required RELOAD).
- FLUSH GLOBAL STATUS requires RELOAD privilege.
- All global status reset moved to FLUSH GLOBAL STATUS.
- Replication semisync status variables are now reset by
FLUSH GLOBAL STATUS.
- In test cases, the only changes are:
- Replace FLUSH STATUS with FLUSH GLOBAL STATUS
- Replace FLUSH STATUS with FLUSH STATUS; FLUSH GLOBAL STATUS.
This was only done in a few tests where the test was using SHOW STATUS
for both local and global variables.
- Uptime_since_flush_status is now always provided, independent if
ENABLED_PROFILING is enabled when compiling MariaDB.
- @@global.Uptime_since_flush_status is reset on FLUSH GLOBAL STATUS
and @@session.Uptime_since_flush_status is reset on FLUSH SESSION STATUS.
- When connected, @@session.Uptime_since_flush_status is set to 0.
In previous commits, changes were made to use the entire 32 bit
unsigned range in order to support timestamps past 2038 on
64 bit systems. Without changing set_max_time on thr_timer to also
match this new range, the server will crash when attempting to
startup past 2038-01-19. Like the previous commits, this only
applies to 64 bit systems.
All new code of the whole pull request, including one or several
files that are either new files or modified ones, are contributed
under the BSD-new license. I am contributing on behalf of my
employer Amazon Web Services, Inc.
* use new deprecated printer for all deprecated server options
* restore alphabetic option sorting order
* move deprecated printer from mysqld.cc to my_getopt.c
* in --help print deprecation message at the end of the option help
* move 'ALL' help text where it belongs - to other SET options, and
with a correct indentation.
* consistently end all or none command-line option help strings
with a dot - my_print_help() needs that.
It's about 50/50 now, so let's do none, less line wraps in --help
* remove trailing spaces from command-line option help strings
Currently there are mechanism to mark a system variable as
deprecated, but they are only used to print warning messages
when a deprecated variable is set.
Leverage the existing mechanisms in order to make the
deprecation information available at the --help output of mysqld by:
* Moving the deprecation information (i.e `deprecation_substitute`
attribute) from the `sys_var` class into the `my_option` struct.
As every `sys_var` contains its own `my_option` struct, the access
to the deprecation information remains available to `sys_var`
objects. `my_getotp` functions, which works directly with
`my_option` structs, gain access to this information while building
the --help output.
* For plugin variables, leverages the `PLUGIN_VAR_DEPRECATED` flag
and set the `deprecation_substitute` attribute accordingly when
building the `my_option` objects.
* Change the `option_cmp` function to use the `deprecation_substitute`
attribute instead of the name when sorting the options. This way
deprecated options and the substitutes will be grouped together.
All new code of the whole pull request, including one or several files
that are either new files or modified ones, are contributed under the
BSD-new license. I am contributing on behalf of my employer
Amazon Web Services, Inc.
According to https://discussions.apple.com/thread/8256853
an attempt to use AVX512 registers on macOS will result in #UD
(crash at runtime).
Also, starting with clang-18 and GCC 14, we must add "evex512" to the
target flags so that AVX and SSE instructions can use AVX512 specific
encodings. This flag was introduced together with the avx10.1-512 target.
Older compiler versions do not recognize "evex512". We do not want to
write "avx10.1-512" because it could enable some AVX512 subfeatures
that we do not have any CPUID check for.
Reviewed by: Vladislav Vaintroub
Tested on macOS by: Valerii Kravchuk