Extends 89c907bd4f to account for
binlog_two_phase_alter flags in a Gtid log event. I.e., if the
FL_COMMIT_ALTER_E1 or FL_ROLLBACK_ALTER_E2 flags are set in the
event flags, yet the length of the event is too short to hold
the value, then set the event as invalid
A GTID event can have variable length, with contributing factors
such as the variable length from the flags2 and optional extra flags
fields. These fields are bitmaps, where each set bit indicates an
additional value that should be appended to the event, e.g.
multi-engine transactions append a number to indicate the number of
additional engines a transaction uses. However, if a flags bit is
set, and no additional fields are appended to the event, MDEV-33672
reports that the server can still try to read from memory as if it
did exist. Note, however, in debug builds, this condition is
asserted for FL_EXTRA_MULTI_ENGINE.
This patch fixes this to check that the length of the event is
aligned with the expectation set by the flags for FL_PREPARED_XA,
FL_COMPLETED_XA, and FL_EXTRA_MULTI_ENGINE.
Reviewed By
============
Kristian Nielsen <knielsen@knielsen-hq.org>
Some fixes related to commit f838b2d799 and
Rows_log_event::do_apply_event() and Update_rows_log_event::do_exec_row()
for system-versioned tables were provided by Nikita Malyavin.
This was required by test versioning.rpl,trx_id,row.
MDEV-33502 Slowdown when running nested statement with many partitions
caused this error as I failed to take into account bigendian architectures.
This patch also introduces bitmap_import() and bitmap_export() to be used
when one wants to store bitmaps in files/logs in a portable way.
Reviewed-by: Kristian Nielsen <knielsen@knielsen-hq.org>
MDEV-33502 Slowdown when running nested statement with many partitions
This change was triggered to help some MariaDB users with close to
10000 bits in their bitmaps.
- Change underlaying storage to be 64 bit instead of 32bit.
- This reduses number of loops to scan bitmaps.
- This can cause some bitmaps to be 4 byte large.
- Ensure that all not used top-bits are always 0 (simplifes code as
the last 64 bit storage is not a special case anymore).
- Use my_find_first_bit() to find the first set bit which is much faster
than scanning trough things byte by byte and then bit by bit.
Other things:
- Added a bool to remember if my_bitmap_init() did allocate the bitmap
array. my_bitmap_free() will only free arrays it did allocate.
This allowed me to remove setting 'bitmap=0' before calling
my_bitmap_free() for cases where the bitmap's where allocated externally.
- my_bitmap_init() sets bitmap to 0 in case of failure.
- Added 'universal' asserts to most bitmap functions.
- Change all remaining calls to bitmap_init() to my_bitmap_init().
- To finish the change from 2014.
- Changed all usage of uint32 in my_bitmap.h to my_bitmap_map.
- Updated bitmap_copy() to handle bitmaps of different size.
- Removed const from bitmap_exists_intersection() as this caused casts
on all usage.
- Removed not used function bitmap_set_above().
- Renamed create_last_word_mask() to create_last_bit_mask() (to match
name changes in my_bitmap.cc)
- Extended bitmap-t with test for more bitmap functions.
Most things where wrong in the test suite.
The one thing that was a bug was that table_map_id was in some places
defined as ulong and in other places as ulonglong. On Linux 64 bit this
is not a problem as ulong == ulonglong, but on windows this caused failures.
Fixed by ensuring that all instances of table_map_id are ulonglong.
Calling SHOW BINLOG EVENTS FROM <offset> with an invalid offset
writes error messages into the server log about invalid reads. The
read errors that occur from this command should only be relayed back
to the user though, and not written into the server log. This is
because they are read-only and have no impact on server operation,
and the client only need be informed to correct the parameter.
This patch fixes this by omitting binary log read errors from the
server when the invocation happens from SHOW BINLOG EVENTS.
Additionally, redundant error messages are omitted when calling the
string based read_log_event from the IO_Cache based read_log_event,
as the later already will report the error of the former.
Reviewed By:
============
Kristian Nielsen <knielsen@knielsen-hq.org>
Andrei Elkin <andrei.elkin@mariadb.com>
The assert's reason was in missed FL_DDL flagging of CREATE-or-REPLACE
Query event.
MDEV-27365 fixes covered only the non-pre-existing table execution branch so
did not see a possibility of implicit commit in
the middle of execution in a rollback branch when the being CREATEd
sequence table is actually replaced.
The pre-existing table branch cleared the DDL modification
flag so the query lost FL_DDL in binlog and its parallel execution
on slave may have ended up with the assert to indicate the query
is raced by a following in binlog order event.
Fixed with applying the MDEV-27365 pattern.
An mtr test is added to cover the rollback situation.
The description test [ pass ] with a generous number of mtr parallel
reties.
recalculate long unique hash in Write_rows_log_event
and Update_rows_log_event.
normally generated columns (stored and indexed virtual)
are deterministic and their values don't need to be recalculated
on the slave as they're already present in the row image.
but the long unique hash function was changed in MDEV-27653,
so a row event from the old master will have the old hash,
but a table created on the new slave will need a new hash.
Constraints processing row_ins_check_foreign_constraint() was not
called because row_upd_check_references_constraints() didn't see
update as delete: node->is_delete was false.
Since MDEV-30378 we check for TRG_EVENT_DELETE to detect versioned
delete in ha_innobase::update_row().
Now we can use TRG_EVENT_DELETE to set upd_node->is_delete, so
constraints processing is triggered correctly.
The case is statement format and mixed InnoDB/MyISAM without
binlog_direct_non_trans_update. Fix due to Brandon Nesterenko.
Reviewed-by: Andrei Elkin <andrei.elkin@mariadb.com>
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
When using binlog_row_image=FULL with sequence table inserts, a
replica can deadlock because it treats full inserts in a sequence as DDL
statements by getting an exclusive lock on the sequence table. It
has been observed that with parallel replication, this exclusive
lock on the sequence table can lead to a deadlock where one
transaction has the exclusive lock and is waiting on a prior
transaction to commit, whereas this prior transaction is waiting on
the MDL lock.
This fix for this is on the master side, to raise FL_DDL
flag on the GTID of a full binlog_row_image write of a sequence table.
This forces the slave to execute the statement serially so a deadlock
cannot happen.
A test verifies the deadlock also to prove it happen on the OLD (pre-fixes)
slave.
OLD (buggy master) -replication-> NEW (fixed slave) is provided.
As the pre-fixes master's full row-image may represent both
SELECT NEXT VALUE and INSERT, the parallel slave pessimistically
waits for the prior transaction to have committed before to take on the
critical part of the second (like INSERT in the test) event execution.
The waiting exploits a parallel slave's retry mechanism which is
controlled by `@@global.slave_transaction_retries`.
Note that in order to avoid any persistent 'Deadlock found' 2013 error
in OLD -> NEW, `slave_transaction_retries` may need to be set to a
higher than the default value.
START-SLAVE is an effective work-around if this still happens.
When replicating MDL events for a table that uses system versioning
without primary keys, ensure that for data sets with duplicate
records, the updates to these records with duplicates are enacted on
the correct row. That is, there was a bug (reported in MDEV-30430)
such that the function to find the row to update would stop after
finding the first matching record. However, in the absence of
primary keys, the version of the record is needed to compare the row
to ensure we are updating the correct one.
The fix, therefore, updates the record comparison functionality to
use system version columns when there are no primary keys on the
table.
Reviewed By:
============
Andrei Elkin <andrei.elkin@mariadb.com>
This patch is the result of running
run-clang-tidy -fix -header-filter=.* -checks='-*,modernize-use-equals-default' .
Code style changes have been done on top. The result of this change
leads to the following improvements:
1. Binary size reduction.
* For a -DBUILD_CONFIG=mysql_release build, the binary size is reduced by
~400kb.
* A raw -DCMAKE_BUILD_TYPE=Release reduces the binary size by ~1.4kb.
2. Compiler can better understand the intent of the code, thus it leads
to more optimization possibilities. Additionally it enabled detecting
unused variables that had an empty default constructor but not marked
so explicitly.
Particular change required following this patch in sql/opt_range.cc
result_keys, an unused template class Bitmap now correctly issues
unused variable warnings.
Setting Bitmap template class constructor to default allows the compiler
to identify that there are no side-effects when instantiating the class.
Previously the compiler could not issue the warning as it assumed Bitmap
class (being a template) would not be performing a NO-OP for its default
constructor. This prevented the "unused variable warning".
Problem:
=======
Mysqlbinlog cannot show the type of a compressed
column when two levels of verbosity is provided.
Solution:
========
Extend the log event printing logic to handle and
tag compressed types.
Behavioral Changes:
==================
Old: When mysqlbinlog is called in verbose mode and
the database uses compressed columns, an error is
returned to the user.
New: The output will append “ COMPRESSED” on the
type of compressed columns
Reviewed By
===========
Andrei Elkin <andrei.elkin@mariadb.com>
1. system_versioning_insert_history session variable allows
pseudocolumns ROW_START and ROW_END be specified in INSERT,
INSERT..SELECT and LOAD DATA.
2. Cleaned up select_insert::send_data() from setting vers_write as
this parameter is now set on TABLE initialization.
4. Replication of system_versioning_insert_history via option_bits in
OPTIONS_WRITTEN_TO_BIN_LOG.
There are separate flags DBUG_OFF for disabling the DBUG facility
and ENABLED_DEBUG_SYNC for enabling the DEBUG_SYNC facility.
Let us allow debug builds without DEBUG_SYNC.
Note: For CMAKE_BUILD_TYPE=Debug, CMakeLists.txt will continue to
define ENABLED_DEBUG_SYNC.
In commit 28325b0863
a compile-time option was introduced to disable the macros
DBUG_ENTER and DBUG_RETURN or DBUG_VOID_RETURN.
The parameter name WITH_DBUG_TRACE would hint that it also
covers DBUG_PRINT statements. Let us do that: WITH_DBUG_TRACE=OFF
shall disable DBUG_PRINT() as well.
A few InnoDB recovery tests used to check that some output from
DBUG_PRINT("ib_log", ...) is present. We can live without those checks.
Reviewed by: Vladislav Vaintroub
The ASAN report was made in the parallel slave execution of a query
event and implicitly involved (so also parallelly run) Format-Description
event.
The Query actually had unexpected impossible dependency on a preceding
"old" FD whose instance got destructed, to cause the ASAN error.
The case is fixed with storing the FD's value into Query-log-event
at its instantiating on slave. The stored value is from the very
FD of the Query's original binlog so remains to be correct
at the query event applying.
The branch C. of a new rpl_parallel_29322.test also demonstrates
(may need few --repeat though) the bug in its simple form of the same
server version binlog.
