Previously multiple threads were allowed to load histograms concurrently.
There were no known problems caused by this. But given amount of data
races in this code, it'd happen sooner or later.
To avoid scalability bottleneck, histograms loading is protected by
per-TABLE_SHARE atomic variable.
Whenever histograms were loaded by preceding statement (hot-path), a
scalable load-acquire check is performed.
Whenever histograms have to be loaded anew, mutual exclusion for loaders
is established by atomic variable. If histograms are being loaded
concurrently, statement waits until load is completed.
- Table_statistics::total_hist_size moved to TABLE_STATISTICS_CB: only
meaningful within TABLE_SHARE (not used for collected stats).
- TABLE_STATISTICS_CB::histograms_can_be_read and
TABLE_STATISTICS_CB::histograms_are_read are replaced with a tri state
atomic variable.
- Simplified away alloc_histograms_for_table_share().
Note: there's still likely a data race if a thread attempts accessing
histograms data after it failed to load it (because of concurrent load).
It was there previously and goes out of the scope of this effort. One way
of fixing it could be reviving TABLE::histograms_are_read and adding
appropriate checks whenever it is needed.
Part of MDEV-19061 - table_share used for reading statistical tables is
not protected
Previously multiple threads were allowed to load statistics concurrently.
There were no known problems caused by this. But given amount of data
races in this code, it'd happen sooner or later.
To avoid scalability bottleneck, statistics loading is protected by
per-TABLE_SHARE atomic variable.
Whenever statistics were loaded by preceding statement (hot-path), a
scalable load-acquire check is performed.
Whenever statistics have to be loaded anew, mutual exclusion for loaders
is established by atomic variable. If statistics are being loaded
concurrently, statement waits until load is completed.
TABLE_STATISTICS_CB::stats_can_be_read and
TABLE_STATISTICS_CB::stats_is_read are replaced with a tri state atomic
variable.
Part of MDEV-19061 - table_share used for reading statistical tables is
not protected
Removed redundant loops, integrated logics into the caller instead.
Unified condition in read_statistics_for_tables(), less
"table_share != NULL" checks, no more potential "table_share == NULL"
dereferencing.
Part of MDEV-19061 - table_share used for reading statistical tables is
not protected
MDEV-22531 Remove maria::implicit_commit()
MDEV-22607 Assertion `ha_info->ht() != binlog_hton' failed in
MYSQL_BIN_LOG::unlog_xa_prepare
From the handler point of view, Aria now looks like a transactional
engine. One effect of this is that we don't need to call
maria::implicit_commit() anymore.
This change also forces the server to call trans_commit_stmt() after doing
any read or writes to system tables. This work will also make it easier
to later allow users to have system tables in other engines than Aria.
To handle the case that Aria doesn't support rollback, a new
handlerton flag, HTON_NO_ROLLBACK, was added to engines that has
transactions without rollback (for the moment only binlog and Aria).
Other things
- Moved freeing of MARIA_SHARE to a separate function as the MARIA_SHARE
can be still part of a transaction even if the table has closed.
- Changed Aria checkpoint to use the new MARIA_SHARE free function. This
fixes a possible memory leak when using S3 tables
- Changed testing of binlog_hton to instead test for HTON_NO_ROLLBACK
- Removed checking of has_transaction_manager() in handler.cc as we can
assume that as the transaction was started by the engine, it does
support transactions.
- Added new class 'start_new_trans' that can be used to start indepdendent
sub transactions, for example while reading mysql.proc, using help or
status tables etc.
- open_system_tables...() and open_proc_table_for_Read() doesn't anymore
take a Open_tables_backup list. This is now handled by 'start_new_trans'.
- Split thd::has_transactions() to thd::has_transactions() and
thd::has_transactions_and_rollback()
- Added handlerton code to free cached transactions objects.
Needed by InnoDB.
squash! 2ed35999f2a2d84f1c786a21ade5db716b6f1bbc
MDEV-22073 MSAN use-of-uninitialized-value in
collect_statistics_for_table()
Other things:
innodb.analyze_table was changed to mainly test statistic
collection. Was discussed with Marko.
* use compile_time_assert instead of DBUG_ASSERT
* don't use thd->clear_error(), because
* the error was already consumed by the error handler, so there is
nothing to clear
* it's dangerous to clear errors indiscriminately, if the error came
from outside of read_statistics_for_tables() it must not be cleared
mysql_insert() first opens all affected tables (which implicitly
starts a transaction in InnoDB), then stat tables.
A failure to open a stat table caused open_tables() to abort
the current stmt transaction (trans_rollback_stmt()). So, from the
server point of view the following ha_write_row()-s happened outside
of a transactions, and the server didn't bother to commit them.
The server has a mechanism to prevent a transaction being
unexpectedly committed or rolled back in the middle of a statement -
if an operation takes place _in a sub-statement_ it cannot change
the transaction state. Operations on stat tables are exactly that -
they are not allowed to change a transaction state. Put them in
a sub-statement to make sure they don't.
read_statistics_for_tables_if_needed
Regression after 279a907, read_statistics_for_tables_if_needed() was
called after open_normal_and_derived_tables() failure.
Fixed by moving read_statistics_for_tables() call to a branch of
get_schema_stat_record() where result of open_normal_and_derived_tables()
is checked.
Removed THD::force_read_stats, added read_statistics_for_tables() instead.
Simplified away statistics_for_command_is_needed().
For CMAKE_BUILD_TYPE=Debug, the default MYSQL_MAINTAINER_MODE=AUTO
implies -Werror along with other flags in cmake/maintainer.cmake,
which would break the debug builds when CMAKE_CXX_FLAGS include -O2.
This fix includes a backport of 6dd3f24090
from MariaDB 10.3.
MDEV-20589: Server still crashes in Field::set_warning_truncated_wrong_value
- Use dbug_tmp_use_all_columns() to mark that all fields can be used
- Remove field->is_stat_field (not needed)
- Remove extra arguments to Field::clone() that should not be there
- Safety fix for Field::set_warning_truncated_wrong_value() to not crash
if table is zero in production builds (We have got crashes several times
here so better to be safe than sorry).
- Threat wrong character string warnings identical to other field
conversion warnings. This removes some warnings we before got from
internal conversion errors. There is no good reason why a user would
get an error in case of 'key_field='wrong-utf8-string' but not for
'field=wrong-utf8-string'. The old code could also easily give
thousands of no-sence warnings for one single statement.
The flag is_stat_field is not set for the min_value and max_value of field items
inside table share. This is a must requirement as we don't want to throw
warnings of truncation when we read values from the statistics table to the column
statistics of table share fields.
The MDEV-20265 commit e746f451d5
introduces DBUG_ASSERT(right_op == r_tbl) in
st_select_lex::add_cross_joined_table(), and that assertion would
fail in several tests that exercise joins. That commit was skipped
in this merge, and a separate fix of MDEV-20265 will be necessary in 10.4.
For MDEV-15955, the fix in create_tmp_field_from_item() would cause a
compilation error. After a discussion with Alexander Barkov, the fix
was omitted and only the test case was kept.
In 10.3 and later, MDEV-15955 is fixed properly by overriding
create_tmp_field() in Item_func_user_var.
A histogram size that is odd in size with DOUBLE precision will leave the last
byte unwritten. When collecting histograms, this causes the last byte to
be uninitialized in the record. memset the buffer to 0 first to make
sure this does not happen.
if columns or indexes are modified/renamed/dropped in an ALTER TABLE,
stat tables must be updated accordingly (e.g. all statistics for a column
should be dropped). But if a stat table doesn't exist, it's not a reason
to fail the whole ALTER TABLE operation - such an error should be ignored.
To read histograms for a table, we should check if the allocation of statistics was done or not,
if not done we should not try to read histograms for such a table.
The command SHOW INDEXES ignored setting of the system variable
use_stat_tables to the value of 'preferably' and and showed statistical
data received from the engine. Similarly queries over the table
STATISTICS from INFORMATION_SCHEMA ignored this setting. It happened
because the function fill_schema_table_by_open() did not read any data
from statistical tables.
For single table updates and multi-table updates , engine independent statistics were not being
read even if the statistics were collected.
Fixed it, so when the optimizer_use_condition_selectivity > 2 then we would read the available
statistics for update queries.
