Conflicts
=========
Text conflict in .bzr-mysql/default.conf
Text conflict in libmysqld/CMakeLists.txt
Text conflict in libmysqld/Makefile.am
Text conflict in mysql-test/collections/default.experimental
Text conflict in mysql-test/extra/rpl_tests/rpl_row_sp006.test
Text conflict in mysql-test/suite/binlog/r/binlog_tmp_table.result
Text conflict in mysql-test/suite/rpl/r/rpl_loaddata.result
Text conflict in mysql-test/suite/rpl/r/rpl_loaddata_fatal.result
Text conflict in mysql-test/suite/rpl/r/rpl_row_create_table.result
Text conflict in mysql-test/suite/rpl/r/rpl_row_sp006_InnoDB.result
Text conflict in mysql-test/suite/rpl/r/rpl_stm_log.result
Text conflict in mysql-test/suite/rpl_ndb/r/rpl_ndb_circular_simplex.result
Text conflict in mysql-test/suite/rpl_ndb/r/rpl_ndb_sp006.result
Text conflict in mysql-test/t/mysqlbinlog.test
Text conflict in sql/CMakeLists.txt
Text conflict in sql/Makefile.am
Text conflict in sql/log_event_old.cc
Text conflict in sql/rpl_rli.cc
Text conflict in sql/slave.cc
Text conflict in sql/sql_binlog.cc
Text conflict in sql/sql_lex.h
21 conflicts encountered.
NOTE
====
mysql-5.1-rpl-merge has been made a mirror of mysql-next-mr:
- "mysql-5.1-rpl-merge$ bzr pull ../mysql-next-mr"
This is the first cset (merge/...) committed after pulling
from mysql-next-mr.
2630.39.1, 2630.28.29, 2630.34.3, 2630.34.2, 2630.34.1, 2630.29.29,
2630.29.28, 2630.31.1, 2630.28.13, 2630.28.10, 2617.23.14 and
some other minor revisions.
This patch implements:
WL#4264 "Backup: Stabilize Service Interface" -- all the
server prerequisites except si_objects.{h,cc} themselves (they can
be just copied over, when needed).
WL#4435: Support OUT-parameters in prepared statements.
(and all issues in the initial patches for these two
tasks, that were discovered in pushbuild and during testing).
Bug#39519: mysql_stmt_close() should flush all data
associated with the statement.
After execution of a prepared statement, send OUT parameters of the invoked
stored procedure, if any, to the client.
When using the binary protocol, send the parameters in an additional result
set over the wire. When using the text protocol, assign out parameters to
the user variables from the CALL(@var1, @var2, ...) specification.
The following refactoring has been made:
- Protocol::send_fields() was renamed to Protocol::send_result_set_metadata();
- A new Protocol::send_result_set_row() was introduced to incapsulate
common functionality for sending row data.
- Signature of Protocol::prepare_for_send() was changed: this operation
does not need a list of items, the number of items is fully sufficient.
The following backward incompatible changes have been made:
- CLIENT_MULTI_RESULTS is now enabled by default in the client;
- CLIENT_PS_MULTI_RESUTLS is now enabled by default in the client.
include/mysql.h:
Add a new flag to MYSQL_METHODS::flush_use_result
function pointer. This flag determines if all results
should be flushed or only the first one:
- if flush_all_results is TRUE, then cli_flush_use_result()
will read/flush all pending results. I.e. it will read
all packets while server status attribute indicates that
there are more results. This is a new semantic, required
to fix the bug.
- if flush_all_results is FALSE, the old sematic
is preserved -- i.e. cli_flush_use_result() reads data
until first EOF-packet.
include/mysql.h.pp:
Update the ABI with new calls (compatible changes).
include/mysql_com.h:
Add CLIENT_PS_OUT_PARAMS -- a client capability indicating that the client supportsю
libmysql/libmysql.c:
Add mysql_stmt_next_result() -- analogue of mysql_next_result() for binary protocol.
Fix a minor bug in alloc_fields() -- not all members were copied over,
and some only shallow-copied (catalog).
Flush all results in mysql_stmt_close() (Bug#39519).
libmysqld/lib_sql.cc:
Rename send_fields() -> send_result_set_metadata().
Refactoring: change prepare_for_send() so that it accepts only
what it really needs -- a number of elements in the list.
mysql-test/r/ps.result:
Update results: WL#4435.
mysql-test/t/ps.test:
WL#4435: A test case for an SQL-part of the problem.
sql-common/client.c:
Bug#39519.
Implement new functionality in cli_flush_use_result():
if flush_all_delete is TRUE, then it should read/flush
all pending results.
sql/Makefile.am:
Add a new header sql_prepare.h to the list
of build headers.
sql/events.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/handler.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/mysql_priv.h:
Move sql_prepare.cc-specific declarations to a new
header - sql_prepare.h.
sql/procedure.h:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/protocol.cc:
Move the logic responsible for sending of one result
set row to the Protocol class. Define a template
for end-of-statement action.
Refactoring: change prepare_for_send() so that it accepts
only what it really needs -- a number of elements in the list.
Rename send_fields() to send_result_set_metadata().
sql/protocol.h:
Update with new declarations (WL#4435).
Rename send_fields() -> send_result_set_metadata().
prepare_for_send() only needs the number of columns to send,
and doesn't use the item list - update signature to require
only what's needed.
Add a new protocol type -- Protocol_local.
sql/repl_failsafe.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/slave.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_acl.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_base.cc:
Include sql_prepare.h (for Reprepare_observer).
sql/sql_cache.cc:
Extend the query cache flags block to be able
to store a numeric id for the result format,
not just a flag binary/non-binary.
sql/sql_class.cc:
Update to use the rename of Protocol::send_fields()
to Protocol::send_result_set_metadata().
Use Protocol::send_one_result_set_row().
sql/sql_class.h:
Move the declaration of Reprepare_observer to the
new header - sql_prepare.h.
Update to the new signature of class Protocol::send_fields().
sql/sql_connect.cc:
Use a protocol template method instead of
raw NET layer API at the end of a statement.
sql/sql_cursor.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_error.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_handler.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
Use new method Protocol::send_one_result_set_row().
sql/sql_help.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_lex.cc:
Initialize multi_statements variable.
Add a handy constant for empty lex
string.
sql/sql_lex.h:
Add a separate member for a standalone
parsing option - multi-statements support.
sql/sql_list.cc:
sql_list.h is a standalone header now,
no need to include mysql_priv.h.
sql/sql_list.h:
Make sql_list.h a stand-alone header.
sql/sql_parse.cc:
Include sql_prepare.h for prepared
statements- related declarations.
Use a new Protocol template method to end
each statement (send OK, EOF or ERROR to
the client).
sql/sql_prepare.cc:
Implement Execute Direct API (WL#4264),
currently unused. It will be used by the service
interface (Backup).
Use a new header - sql_prepare.h.
Add support for OUT parameters in the
binary and text protocol (prepared statements
only).
sql/sql_prepare.h:
Add a new header to contain (for now)
all prepared statement- external
related declarations.
sql/sql_profile.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_repl.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_select.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_show.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_string.h:
Add a way to convert a String to LEX_STRING.
sql/sql_table.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_update.cc:
Remove an extraneous my_error(). The error
is already reported in update_non_unique_table_error().
sql/sql_yacc.yy:
Support for multi-statements is an independent
property of parsing, not derived from
the protocol type.
tests/mysql_client_test.c:
Add tests for WL#4435 (binary protocol).
----------------------------------------------------------
revno: 2630.22.8
committer: Konstantin Osipov <konstantin@mysql.com>
branch nick: mysql-6.0-runtime
timestamp: Sun 2008-08-10 18:49:52 +0400
message:
Get rid of typedef struct for the most commonly used types:
TABLE, TABLE_SHARE, LEX. This simplifies use of tags
and forward declarations.
storing and restoring information about foreign keys in the .FRM files and
properly displaying it in SHOW CREATE TABLE output and I_S tables.
The idea of this patch is to change type of Key_part_spec::field_name and
Key::name to LEX_STRING in order to avoid extra strlen() calls during
semantic analysis and statement execution, particularly, in code to be
implemented on the 2nd milestone of WL#148.
Note that since we are not using LEX_STRING everywhere yet (e.g. in
Create_field and KEY) and we want to limit scope of our changes we
have to do strlen() in places where we create Key and Key_part_spec
instances from objects using plain (char*) for strings. These calls
will go away during the process of further (char*) -> LEX_STRING
refactoring.
We have introduced these changes in 6.0 and backported them to 5.5
tree to make people aware of these changes as early as possible and
to simplify merges with mysql-fk and mysql-6.1-fk trees.
No test case is needed since this patch does not introduce any
user visible changes.
sql/sql_class.cc:
Key_part_spec::field_name is now LEX_STRING. Adjusted code accordingly.
sql/sql_class.h:
Changed type of Key_part_spec::field_name and Key::name to LEX_STRING in
order to avoid extra strlen() calls in code responsible for semantic
analysis and statement execution (e.g. in future code responsible for
saving/restoring info about foreign keys).
sql/sql_lex.cc:
Moved null_lex_str from sql_yacc.yy to sql_lex.cc and added its
declaration to sql_lex.h to make it accessible in other SQL-layer
modules (e.g. sql_parse.cc).
sql/sql_lex.h:
Made null_lex_str accessible from outside of sql_lex.cc.
sql/sql_parse.cc:
Key_part_spec::field_name and Key::name are now LEX_STRING. Adjusted
code accordingly.
sql/sql_table.cc:
Adjusted code to accomodate change of type to LEX_STRING for
Key_part_spec::field_name and Key::name.
sql/sql_yacc.yy:
Now Key::name and Key_part_spec::field_name are LEX_STRINGs. Adjusted
grammar to be able properly initialize them. This should allow us to
save on some strlen() calls during later stages of statement execution.
files
NOTE: this is the backport to next-mr.
SHOW BINLOG EVENTS does not work with relay log files. If issuing
"SHOW BINLOG EVENTS IN 'relay-log.000001'" in a non-empty relay
log file (relay-log.000001), mysql reports empty set.
This patch addresses this issue by extending the SHOW command
with RELAYLOG. Events in relay log files can now be inspected by
issuing SHOW RELAYLOG EVENTS [IN 'log_name'] [FROM pos] [LIMIT
[offset,] row_count].
mysql-test/extra/rpl_tests/rpl_show_relaylog_events.inc:
Shared part of the test case.
mysql-test/include/show_binlog_events.inc:
Added options $binary_log_file, $binary_log_limit_row,
$binary_log_limit_offset so that show_binlog_events can take
same parameters as SHOW BINLOG EVENTS does.
mysql-test/include/show_relaylog_events.inc:
Clone of show_binlog_events for relaylog events.
mysql-test/suite/rpl/t/rpl_row_show_relaylog_events.test:
Test case for row based replication.
mysql-test/suite/rpl/t/rpl_stm_mix_show_relaylog_events.test:
Test case for statement and mixed mode replication.
sql/lex.h:
Added RELAYLOG symbol.
sql/mysqld.cc:
Added "show_relaylog_events" to status_vars.
sql/sp_head.cc:
Set SQLCOM_SHOW_RELAYLOG_EVENTS to return flags=
sp_head::MULTI_RESULTS; in sp_get_flags_for_command as
SQLCOM_SHOW_BINLOG_EVENTS does.
sql/sql_lex.h:
Added sql_command SQLCOM_SHOW_RELAYLOG_EVENTS to lex enum_sql_command.
sql/sql_parse.cc:
Added handling of SQLCOM_SHOW_RELAYLOG_EVENTS.
sql/sql_repl.cc:
mysql_show_binlog_events set to choose the log file to use based on
the command issued (SHOW BINLOG|RELAYLOG EVENTS).
sql/sql_yacc.yy:
Added RELAYLOG to the grammar.
"load data" statements were written to the binlog as a mix of the original statement
and bits recreated from parse-info. This relied on implementation details and broke
with IGNORE_SPACES and versioned comments.
We now completely resynthesize the query for LOAD DATA for binlog (which among other
things normalizes them somewhat with regard to case, spaces, etc.).
We have already parsed the query properly, so we make use of that rather
than mix-and-match string literals and parsed items.
This should make us safe with regard to versioned comments, even those
spanning multiple tokens. Also no longer affected by IGNORE_SPACES.
mysql-test/r/mysqlbinlog.result:
LOAD DATA INFILE normalized
mysql-test/suite/binlog/r/binlog_killed_simulate.result:
LOAD DATA INFILE normalized
mysql-test/suite/binlog/r/binlog_row_mix_innodb_myisam.result:
LOAD DATA INFILE normalized
mysql-test/suite/binlog/r/binlog_stm_blackhole.result:
LOAD DATA INFILE normalized
mysql-test/suite/binlog/r/binlog_stm_mix_innodb_myisam.result:
LOAD DATA INFILE normalized
mysql-test/suite/rpl/r/rpl_innodb_mixed_dml.result:
LOAD DATA INFILE normalized
mysql-test/suite/rpl/r/rpl_loaddata.result:
LOAD DATA INFILE normalized
mysql-test/suite/rpl/r/rpl_loaddata_fatal.result:
LOAD DATA INFILE normalized; offsets adjusted to reflect that
mysql-test/suite/rpl/r/rpl_loaddata_map.result:
LOAD DATA INFILE normalized
mysql-test/suite/rpl/r/rpl_loaddatalocal.result:
test for #43746 - trying to break LOAD DATA part of parser
mysql-test/suite/rpl/r/rpl_stm_log.result:
LOAD DATA INFILE normalized
mysql-test/suite/rpl/t/rpl_loaddatalocal.test:
try to break the LOAD DATA part of the parser (test for #43746)
mysql-test/t/mysqlbinlog.test:
LOAD DATA INFILE normalized; adjust offsets to reflect that
sql/log_event.cc:
clean up Load_log_event::print_query and friends so they don't print
excess spaces. add support for printing charset names to print_query.
sql/log_event.h:
We already have three places where we synthesize LOAD DATA queries.
Better use one of those!
sql/sql_lex.h:
When binlogging LOAD DATA statements, we make up the statement to
be logged (from the parse-info, rather than substrings of the
original query) now. Consequently, we no longer need (string-)
pointers into the original query.
sql/sql_load.cc:
Completely rewrote write_execute_load_query_log_event() to synthesize the
LOAD DATA statement wholesale, rather than piece it together from
synthesized bits and literal excerpts from the original query. This
will not only give us a nice, normalized statement (all uppercase,
no excess spaces, etc.), it will also handle comments, including
versioned comments right, which is certainly more than we can say
about the previous incarnation.
sql/sql_yacc.yy:
We're no longer assembling LOAD DATA statements from bodyparts of the
original query, so some bookkeeping in the parser can go.
Added a more detailed error message on calling an ambiguous missing function.
mysql-test/r/ps.result:
Bug #38159: fixed existing tests
mysql-test/r/sp-error.result:
Bug #38159: test case
mysql-test/t/ps.test:
Bug #38159: fixed existing tests
mysql-test/t/sp-error.test:
Bug #38159: test case
sql/item_func.cc:
Bug #38159: generate more detailed error message
sql/share/errmsg.txt:
Bug #38159: add a more detailed error message
sql/sql_derived.cc:
Bug #38159: treat the detailed error message the same way as the
generic one
sql/sql_lex.cc:
Bug #38159:
- detect if the token is ambiguous and print the appropriate error.
- backport is_lex_native_function() from 5.1
sql/sql_lex.h:
Bug #38159: detect if the token is ambiguous and print the appropriate error.
sql/sql_yacc.yy:
Bug #38159: generate more detailed error message
sql/table.cc:
Bug #38159: treat the detailed error message the same way as the
generic one
comment can't be read back
A change to the lexer in 5.1 caused slash-asterisk-bang-version
sections to be terminated early if there exists a slash-asterisk-
style comment inside it. Nesting comments is usually illegal,
but we rely on versioned comment blocks in mysqldump, and the
contents of those sections must be allowed to have comments.
The problem was that when encountering open-comment tokens and
consuming -or- passing through the contents, the "in_comment"
state at the end was clobbered with the not-in-a-comment value,
regardless of whether we were in a comment before this or not.
So, """/*!VER one /* two */ three */""" would lose its in-comment
state between "two" and "three". Save the echo and in-comment
state, and restore it at the end of the comment if we consume a
comment.
The problem is that a SELECT .. FOR UPDATE statement might open
a table and later wait for a impeding global read lock without
noticing whether it is holding a table that is being waited upon
the the flush phase of the process that took the global read
lock.
The same problem also affected the following statements:
LOCK TABLES .. WRITE
UPDATE .. SET (update and multi-table update)
TRUNCATE TABLE ..
LOAD DATA ..
The solution is to make the above statements wait for a impending
global read lock before opening the tables. If there is no
impending global read lock, the statement raises a temporary
protection against global read locks and progresses smoothly
towards completion.
Important notice: the patch does not try to address all possible
cases, only those which are common and can be fixed unintrusively
enough for 5.0.
mysql-test/r/lock_multi.result:
Add test case result for Bug#43230
mysql-test/t/lock_multi.test:
Add test case for Bug#43230
sql/sql_lex.cc:
Initialize flag.
sql/sql_lex.h:
Add a flag to the lexer.
sql/sql_parse.cc:
Wait for the global read lock is a write lock is going to be
taken. The wait is done before opening tables.
sql/sql_yacc.yy:
Protect against the GRL if its a SELECT .. FOR UPDATE or LOCK TABLES
.. WRITE statement.
An unnecessarily restrictive lock were taken on sub-SELECTs during DELETE.
During parsing, a global structure is reused for sub-SELECTs and the attribute
keeping track of lock options were not reset properly.
This patch introduces a new attribute to keep track on the syntactical lock
option elements found in a sub-SELECT and then sets the lock options accordingly.
Now the sub-SELECTs will try to acquire a READ lock if possible
instead of a WRITE lock as inherited from the outer DELETE statement.
mysql-test/r/lock.result:
Added test case for bug39843
mysql-test/t/lock.test:
Added test case for bug39843
sql/sql_lex.cc:
* Reset member variable lock_option on each new query.
sql/sql_lex.h:
* Introduced new member variable 'lock_option' which is keeping track
of the syntactical lock option of a (sub-)select query.
sql/sql_parse.cc:
* Wrote comments to functions.
sql/sql_yacc.yy:
* Introduced an attribute to keep track of syntactical lock options
in sub-selects.
* Made sure that the default value TL_READ_DEFAULT is at the begining
of each subselect-rule.
- Remove bothersome warning messages. This change focuses on the warnings
that are covered by the ignore file: support-files/compiler_warnings.supp.
- Strings are guaranteed to be max uint in length
Adding comments to some of the high-level functions in replication.
sql/log_event.h:
Fixed some mistakes in comments.
sql/repl_failsafe.cc:
Added comment for show_slave_hosts()
sql/slave.cc:
Added comment for show_master_info(), handle_slave_[sql|io](), and next_event()
sql/sql_binlog.cc:
Added @param comment.
sql/sql_lex.h:
Added comment for st_lex_master_info.
sql/sql_repl.cc:
Added comments for functions executing a statement:
PURGE BINARY LOGS
START SLAVE
STOP SLAVE
RESET SLAVE
CHANGE MASTER
RESET MASTER
SHOW BINLOG EVENTS
SHOW MASTER STATUS
SHOW BINARY LOGS
on non-partitioned table
Problem was that partitioning specific commands was accepted
for non partitioned tables and treated like
ANALYZE/CHECK/OPTIMIZE/REPAIR TABLE, after bug-20129 was fixed,
which changed the code path from mysql_alter_table to
mysql_admin_table.
Solution was to check if the table was partitioned before
trying to execute the admin command
mysql-test/r/partition_mgm_err.result:
Bug#39434: ALTER TABLE CHECK/OPTIMIZE/ANALYZE PARTITION work
on non-partitioned table
Updated test result
mysql-test/t/partition_mgm_err.test:
Bug#39434: ALTER TABLE CHECK/OPTIMIZE/ANALYZE PARTITION work
on non-partitioned table
Updated test case
sql/ha_partition.cc:
Bug#39434: ALTER TABLE CHECK/OPTIMIZE/ANALYZE PARTITION work
on non-partitioned table
Simplified the code by using ALTER_ADMIN_PARTITION for all
commands that go through mysql_admin_tables and is set
for partitioning specific commands that.
sql/ha_partition.h:
Bug#39434: ALTER TABLE CHECK/OPTIMIZE/ANALYZE PARTITION work
on non-partitioned table
Simplified the code by using ALTER_ADMIN_PARTITION for all
commands that go through mysql_admin_tables and is set
for partitioning specific commands that.
sql/sql_lex.h:
Bug#39434: ALTER TABLE CHECK/OPTIMIZE/ANALYZE PARTITION work
on non-partitioned table
Simplified the code by using ALTER_ADMIN_PARTITION for all
commands that go through mysql_admin_tables and is set
for partitioning specific commands that.
Removed ALTER_ANALYZE/CHECK/OPTIMIZE/REPAIR_PARTITION and
added ALTER_ADMIN_PARTITION instead.
sql/sql_partition.cc:
Bug#39434: ALTER TABLE CHECK/OPTIMIZE/ANALYZE PARTITION work
on non-partitioned table
Simplified the code by using ALTER_ADMIN_PARTITION for all
commands that go through mysql_admin_tables and is set
for partitioning specific commands that.
Removed ALTER_ANALYZE/CHECK/OPTIMIZE/REPAIR_PARTITION and
added ALTER_ADMIN_PARTITION instead.
sql/sql_table.cc:
Bug#39434: ALTER TABLE CHECK/OPTIMIZE/ANALYZE PARTITION work
on non-partitioned table
Give error and return if trying partitioning admin command
on non partitioned table.
Simplified the code by using ALTER_ADMIN_PARTITION for all
commands that go through mysql_admin_tables and is set
for partitioning specific commands that.
Removed ALTER_ANALYZE/CHECK/OPTIMIZE/REPAIR_PARTITION and
added ALTER_ADMIN_PARTITION instead.
sql/sql_yacc.yy:
Bug#39434: ALTER TABLE CHECK/OPTIMIZE/ANALYZE PARTITION work
on non-partitioned table
Simplified the code by using ALTER_ADMIN_PARTITION for all
commands that go through mysql_admin_tables and is set
for partitioning specific commands that.
Removed ALTER_ANALYZE/CHECK/OPTIMIZE/REPAIR_PARTITION and
added ALTER_ADMIN_PARTITION instead.
``FLUSH TABLES WITH READ LOCK''
Concurrent execution of 1) multitable update with a
NATURAL/USING join and 2) a such query as "FLUSH TABLES
WITH READ LOCK" or "ALTER TABLE" of updating table led
to a server crash.
The mysql_multi_update_prepare() function call is optimized
to lock updating tables only, so it postpones locking to
the last, and if locking fails, it does cleanup of modified
syntax structures and repeats a query analysis. However,
that cleanup procedure was incomplete for NATURAL/USING join
syntax data: 1) some Field_item items pointed into freed
table structures, and 2) the TABLE_LIST::join_columns fields
was not reset.
Major change:
short-living Field *Natural_join_column::table_field has
been replaced with long-living Item*.
mysql-test/r/lock_multi.result:
Added test case for bug #38691.
mysql-test/t/lock_multi.test:
Added test case for bug #38691.
sql/item.cc:
Bug #38691: segfault/abort in ``UPDATE ...JOIN'' while
``FLUSH TABLES WITH READ LOCK''
The Item_field constructor has been modified to allocate
and copy original database/table/field names always (not
during PS preparation/1st execution only), because
an initialization of Item_field items with a pointer to
short-living Field structures is a common practice.
sql/sql_base.cc:
Bug #38691: segfault/abort in ``UPDATE ...JOIN'' while
``FLUSH TABLES WITH READ LOCK''
1) Type adjustment for Natural_join_column::table_field
(Field to Item_field);
2) The setup_natural_join_row_types function has been
updated to take into account new
first_natural_join_processing flag to skip unnecessary
reinitialization of Natural_join_column::join_columns
during table reopening after lock_tables() failure
(like the 'first_execution' flag for PS).
sql/sql_lex.cc:
Bug #38691: segfault/abort in ``UPDATE ...JOIN'' while
``FLUSH TABLES WITH READ LOCK''
Initialization of the new
st_select_lex::first_natural_join_processing flag has
been added.
sql/sql_lex.h:
Bug #38691: segfault/abort in ``UPDATE ...JOIN'' while
``FLUSH TABLES WITH READ LOCK''
The st_select_lex::first_natural_join_processing flag
has been added to skip unnecessary rebuilding of
NATURAL/USING JOIN structures during table reopening
after lock_tables failure.
sql/sql_update.cc:
Bug #38691: segfault/abort in ``UPDATE ...JOIN'' while
``FLUSH TABLES WITH READ LOCK''
Extra cleanup calls have been added to reset
Natural_join_column::table_field items.
sql/table.cc:
Bug #38691: segfault/abort in ``UPDATE ...JOIN'' while
``FLUSH TABLES WITH READ LOCK''
Type adjustment for Natural_join_column::table_field
(Field to Item_field).
sql/table.h:
Bug #38691: segfault/abort in ``UPDATE ...JOIN'' while
``FLUSH TABLES WITH READ LOCK''
Type of the Natural_join_column::table_field field has
been changed from Field that points into short-living
TABLE memory to long-living Item_field that can be
linked to (fixed) reopened table.
columns data types
The "SELECT @lastId, @lastId := Id FROM t" query returns
different result sets depending on the type of the Id column
(INT or BIGINT).
Note: this fix doesn't cover the case when a select query
references an user variable and stored function that
updates a value of that variable, in this case a result
is indeterminate.
The server uses incorrect assumption about a constantness of
an user variable value as a select list item:
The server caches a last query number where that variable
was changed and compares this number with a current query
number. If these numbers are different, the server guesses,
that the variable is not updating in the current query, so
a respective select list item is a constant. However, in some
common cases the server updates cached query number too late.
The server has been modified to memorize user variable
assignments during the parse phase to take them into account
on the next (query preparation) phase independently of the
order of user variable references/assignments in a select
item list.
mysql-test/r/user_var.result:
Added test case for bug #26020.
mysql-test/t/user_var.test:
Added test case for bug #26020.
sql/item_func.cc:
An update of entry and update_query_id variables has been
moved from Item_func_set_user_var::fix_fields() to a separate
method, Item_func_set_user_var::set_entry().
sql/item_func.h:
1. The Item_func_set_user_var::set_entry() method has been
added to update Item_func_set_user_var::entry.
2. The Item_func_set_user_var::entry_thd field has beend
added to update Item_func_set_user_var::entry only when
needed.
sql/sql_base.cc:
Fix: setup_fiedls() calls Item_func_set_user_var::set_entry()
for all items from the thd->lex->set_var_list before the first
call of ::fix_fields().
sql/sql_lex.cc:
The lex_start function has been modified to reset
the st_lex::set_var_list list.
sql/sql_lex.h:
New st_lex::set_var_list field has been added to
memorize all user variable assignments in the current
select query.
sql/sql_yacc.yy:
The variable_aux rule has been modified to memorize
in-query user variable assignments in the
st_lex::set_var_list list.
This fix is for 5.0 only : back porting the 6.0 patch manually
The parser code in sql/sql_yacc.yy needs to be more robust to out of
memory conditions, so that when parsing a query fails due to OOM,
the thread gracefully returns an error.
Before this fix, a new/alloc returning NULL could:
- cause a crash, if dereferencing the NULL pointer,
- produce a corrupted parsed tree, containing NULL nodes,
- alter the semantic of a query, by silently dropping token values or nodes
With this fix:
- C++ constructors are *not* executed with a NULL "this" pointer
when operator new fails.
This is achieved by declaring "operator new" with a "throw ()" clause,
so that a failed new gracefully returns NULL on OOM conditions.
- calls to new/alloc are tested for a NULL result,
- The thread diagnostic area is set to an error status when OOM occurs.
This ensures that a request failing in the server properly returns an
ER_OUT_OF_RESOURCES error to the client.
- OOM conditions cause the parser to stop immediately (MYSQL_YYABORT).
This prevents causing further crashes when using a partially built parsed
tree in further rules in the parser.
No test scripts are provided, since automating OOM failures is not
instrumented in the server.
Tested under the debugger, to verify that an error in alloc_root cause the
thread to returns gracefully all the way to the client application, with
an ER_OUT_OF_RESOURCES error.
build)
The crash was caused by freeing the internal parser stack during the parser
execution.
This occured only for complex stored procedures, after reallocating the parser
stack using my_yyoverflow(), with the following C call stack:
- MYSQLparse()
- any rule calling sp_head::restore_lex()
- lex_end()
- x_free(lex->yacc_yyss), xfree(lex->yacc_yyvs)
The root cause is the implementation of stored procedures, which breaks the
assumption from 4.1 that there is only one LEX structure per parser call.
The solution is to separate the LEX structure into:
- attributes that represent a statement (the current LEX structure),
- attributes that relate to the syntax parser itself (Yacc_state),
so that parsing multiple statements in stored programs can create multiple
LEX structures while not changing the unique Yacc_state.
Now, Yacc_state and the existing Lex_input_stream are aggregated into
Parser_state, a structure that represent the complete state of the (Lexical +
Syntax) parser.
mysql-test/r/parser_stack.result:
Bug#35577 (CREATE PROCEDURE causes either crash or syntax error depending on
build)
mysql-test/t/parser_stack.test:
Bug#35577 (CREATE PROCEDURE causes either crash or syntax error depending on
build)
sql/sp.cc:
Bug#35577 (CREATE PROCEDURE causes either crash or syntax error depending on
build)
sql/sp_head.cc:
Bug#35577 (CREATE PROCEDURE causes either crash or syntax error depending on
build)
sql/sql_class.cc:
Bug#35577 (CREATE PROCEDURE causes either crash or syntax error depending on
build)
sql/sql_class.h:
Bug#35577 (CREATE PROCEDURE causes either crash or syntax error depending on
build)
sql/sql_lex.cc:
Bug#35577 (CREATE PROCEDURE causes either crash or syntax error depending on
build)
sql/sql_lex.h:
Bug#35577 (CREATE PROCEDURE causes either crash or syntax error depending on
build)
sql/sql_parse.cc:
Bug#35577 (CREATE PROCEDURE causes either crash or syntax error depending on
build)
sql/sql_prepare.cc:
Bug#35577 (CREATE PROCEDURE causes either crash or syntax error depending on
build)
sql/sql_trigger.cc:
Bug#35577 (CREATE PROCEDURE causes either crash or syntax error depending on
build)
sql/sql_view.cc:
Bug#35577 (CREATE PROCEDURE causes either crash or syntax error depending on
build)
sql/sql_yacc.yy:
Bug#35577 (CREATE PROCEDURE causes either crash or syntax error depending on
build)
into moonbone.local:/work/27219-bug-5.1
sql/item_subselect.cc:
Auto merged
sql/item_sum.cc:
Auto merged
sql/item_sum.h:
Auto merged
sql/mysql_priv.h:
Auto merged
sql/sql_lex.cc:
Auto merged
sql/sql_select.cc:
Auto merged
mysql-test/r/group_by.result:
SCCS merged
mysql-test/t/group_by.test:
SCCS merged
sql/item.cc:
SCCS merged
sql/sql_lex.h:
SCCS merged
Mixing aggregate functions and non-grouping columns is not allowed in the
ONLY_FULL_GROUP_BY mode. However in some cases the error wasn't thrown because
of insufficient check.
In order to check more thoroughly the new algorithm employs a list of outer
fields used in a sum function and a SELECT_LEX::full_group_by_flag.
Each non-outer field checked to find out whether it's aggregated or not and
the current select is marked accordingly.
All outer fields that are used under an aggregate function are added to the
Item_sum::outer_fields list and later checked by the Item_sum::check_sum_func
function.
mysql-test/t/group_by.test:
Added a test case for the bug#27219: Aggregate functions in ORDER BY.
mysql-test/r/group_by.result:
Added a test case for the bug#27219: Aggregate functions in ORDER BY.
sql/sql_select.cc:
Bug#27219: Aggregate functions in ORDER BY.
Implementation of new check for mixing non aggregated fields and aggregation
function in the ONLY_FULL_GROUP_BY mode.
sql/sql_lex.cc:
Bug#27219: Aggregate functions in ORDER BY.
Initialization of the full_group_by_flag bitmap.
SELECT_LEX::test_limit function doesn't reset ORDER BY
clause anymore.
sql/sql_lex.h:
Bug#27219: Aggregate functions in ORDER BY.
The full_group_by_flag is added to the SELECT_LEX class.
sql/item_sum.h:
Bug#27219: Aggregate functions in ORDER BY.
The outer_fields list is added to the Item_sum class.
sql/mysql_priv.h:
Bug#27219: Aggregate functions in ORDER BY.
Defined a set of constants used in the new check for mixing non aggregated
fields and sum functions in the ONLY_FULL_GROUP_BY_MODE.
sql/item_subselect.cc:
Bug#27219: Aggregate functions in ORDER BY.
The Item_in_subselect::select_in_like_transformer function now drops
ORDER BY clause in all selects in a subquery.
sql/item_sum.cc:
Bug#27219: Aggregate functions in ORDER BY.
Now the Item_sum::check_sum_func function now checks whether fields in the
outer_fields list are aggregated or not and marks selects accordingly.
sql/item.cc:
Bug#27219: Aggregate functions in ORDER BY.
Now the Item_field::fix_fields function checks whether the field is aggregated
or not and marks its select_lex accordingly.
