Remove the debug parameter innodb_force_recovery_crash that was
introduced into MySQL 5.6 by me in WL#6494 which allowed InnoDB
to resize the redo log on startup.
Let innodb.log_file_size actually start up the server, but ensure
that the InnoDB storage engine refuses to start up in each of the
scenarios.
that must not send a response
Problem:- When using wsrep (w/ galera) and issuing commands that can
cause deadlocks, deadlock exception errors are sent in responses to
commands such as close prepared statement and close connection which,
by spec, must not send a response.
Solution:- In dispatch_command, we will handle COM_QUIT and COM_STMT_CLOSE
commands even in case of error.
Patch Credit:- Jaka Močnik
The temporary tables created for recursive table references
should be closed in close_thread_tables(), because they might
be used in the statements like ANALYZE WITH r AS (...) SELECT * from r
where r is defined through recursion.
As noted in MDEV-8841, any test that kills the server must issue
FLUSH TABLES, so that tables of crash-unsafe storage engines will
not be corrupted. Consistently issue this statement after any
call mtr.add_suppression() calls.
Also, do not invoke shutdown_server directly, but use helpers instead.
As noted in MDEV-8841, any test that kills the server must issue
FLUSH TABLES, so that tables of crash-unsafe storage engines will
not be corrupted. Consistently issue this statement after any
call mtr.add_suppression() calls.
Also, do not invoke shutdown_server directly, but use helpers instead.
recv_scan_log_recs(): Remember if redo log apply is needed,
even if starting up in innodb_read_only mode.
recv_recovery_from_checkpoint_start_func(): Refuse
innodb_read_only startup if redo log apply is needed.
Do not kill the server after call mtr.add_suppression(), because
the procedure modifies a crash-unsafe table, and we do not want to
corrupt that table.
Do wait only if innodb_num_page_compressed_trim_op shows that
we have succeed to do at least few trim operations (and
that will happen on insert if possible).
crashes server
This bug is the result of merging the Oracle MySQL follow-up fix
BUG#22963169 MYSQL CRASHES ON CREATE FULLTEXT INDEX
without merging the base bug fix:
Bug#79475 Insert a token of 84 4-bytes chars into fts index causes
server crash.
Unlike the above mentioned fixes in MySQL, our fix will not change
the storage format of fulltext indexes in InnoDB or XtraDB
when a character encoding with mbmaxlen=2 or mbmaxlen=3
and the length of a word is between 128 and 84*mbmaxlen bytes.
The Oracle fix would allocate 2 length bytes for these cases.
Compatibility with other MySQL and MariaDB releases is ensured by
persisting the used maximum length in the SYS_COLUMNS table in the
InnoDB data dictionary.
This fix also removes some unnecessary strcmp() calls when checking
for the legacy default collation my_charset_latin1
(my_charset_latin1.name=="latin1_swedish_ci").
fts_create_one_index_table(): Store the actual length in bytes.
This metadata will be written to the SYS_COLUMNS table.
fts_zip_initialize(): Initialize only the first byte of the buffer.
Actually the code should not even care about this first byte, because
the length is set as 0.
FTX_MAX_WORD_LEN: Define as HA_FT_MAXCHARLEN * 4 aka 336 bytes,
not as 254 bytes.
row_merge_create_fts_sort_index(): Set the actual maximum length of the
column in bytes, similar to fts_create_one_index_table().
row_merge_fts_doc_tokenize(): Remove the redundant parameter word_dtype.
Use the actual maximum length of the column. Calculate the extra_size
in the same way as row_merge_buf_encode() does.
recv_scan_log_recs(): Remember if redo log apply is needed,
even if starting up in innodb_read_only mode.
recv_recovery_from_checkpoint_start_func(): Refuse
innodb_read_only startup if redo log apply is needed.
Both dict_foreign_find_index and dict_foreign_qualify_index
did not consider virtual columns as possible foreign key
columns and there was assertion to disable virtual columns.
Fixed by also looking referencing and referenced column
from virtual columns if needed.
The fields st_select_lex::cond_pushed_into_where and
st_select_lex::cond_pushed_into_having should be re-initialized
for the unit specifying a derived table at every re-execution
of the query that uses this derived table, because the result
of condition pushdown may be different for different executions.
Before "MDEV-10709 Expressions as parameters to Dynamic SQL" only
user variables were syntactically allowed as EXECUTE parameters.
User variables were OK as both IN and OUT parameters.
When Item_param was bound to an actual parameter (a user variable),
it automatically meant that the bound Item was settable.
The DBUG_ASSERT() in Protocol_text::send_out_parameters() guarded that
the actual parameter is really settable.
After MDEV-10709, any kind of expressions are allowed as EXECUTE IN parameters.
But the patch for MDEV-10709 forgot to check that only descendants of
Settable_routine_parameter should be allowed as OUT parameters.
So an attempt to pass a non-settable parameter as an OUT parameter
made server crash on the above mentioned DBUG_ASSERT.
This patch changes Item_param::get_settable_routine_parameter(),
which previously always returned "this". Now, when Item_param is bound
to some Item, it caches if the bound Item is settable.
Item_param::get_settable_routine_parameter() now returns "this" only
if the bound actual parameter is settable, and returns NULL otherwise.
Problem was that implementation merged from 10.1 was incompatible
with InnoDB 5.7.
buf0buf.cc: Add functions to return should we punch hole and
how big.
buf0flu.cc: Add written page to IORequest
fil0fil.cc: Remove unneeded status call and add test is
sparse files and punch hole supported by file system when
tablespace is created. Add call to get file system
block size. Used file node is added to IORequest. Added
functions to check is punch hole supported and setting
punch hole.
ha_innodb.cc: Remove unneeded status variables (trim512-32768)
and trim_op_saved. Deprecate innodb_use_trim and
set it ON by default. Add function to set innodb-use-trim
dynamically.
dberr.h: Add error code DB_IO_NO_PUNCH_HOLE
if punch hole operation fails.
fil0fil.h: Add punch_hole variable to fil_space_t and
block size to fil_node_t.
os0api.h: Header to helper functions on buf0buf.cc and
fil0fil.cc for os0file.h
os0file.h: Remove unneeded m_block_size from IORequest
and add bpage to IORequest to know actual size of
the block and m_fil_node to know tablespace file
system block size and does it support punch hole.
os0file.cc: Add function punch_hole() to IORequest
to do punch_hole operation,
get the file system block size and determine
does file system support sparse files (for punch hole).
page0size.h: remove implicit copy disable and
use this implicit copy to implement copy_from()
function.
buf0dblwr.cc, buf0flu.cc, buf0rea.cc, fil0fil.cc, fil0fil.h,
os0file.h, os0file.cc, log0log.cc, log0recv.cc:
Remove unneeded write_size parameter from fil_io
calls.
srv0mon.h, srv0srv.h, srv0mon.cc: Remove unneeded
trim512-trim32678 status variables. Removed
these from monitor tests.
Problem: Item_param::basic_const_item() returned true when fixed==false.
This unexpected combination made Item::const_charset_converter() crash
on asserts.
Fix:
- Changing all Item_param::set_xxx() to set "fixed" to true.
This fixes the problem.
- Additionally, changing all Item_param::set_xxx() to set
Item_param::item_type, to avoid duplicate code, and for consistency,
to make the code symmetric between different constant types.
Before this patch only set_null() set item_type.
- Moving Item_param::state and Item_param::item_type from public to private,
to make sure easier that these members are in sync with "fixed" and to
each other.
- Adding a new argument "unsigned_arg" to Item::set_decimal(),
and reusing it in two places instead of duplicate code.
- Adding a new method Item_param::fix_temporal() and reusing it in two places.
- Adding methods has_no_value(), has_long_data_value(), has_int_value(),
instead of direct access to Item_param::state.
[0-9]*[.]?[0-9]* wasn't a sufficient regex to cover the
%lg used in Json_writer::add_double. Exponent formats
where missed.
Here we normalize all the replace_regex expressions for
ANALYZE FORMAT=JSON into one include file.
Signed-off-by: Daniel Black <daniel.black@au.ibm.com>
Problem:- When setting max_binlog_stmt_cache_size=18446744073709547520
from either command line or .cnf file, server fails to start.
Solution:- Added one more function eval_num_suffix_ull , which uses
strtoull to get unsigned ulonglong from string. And getopt_ull calls this
function instead of eval_num_suffix. Also changed previous eval_num_suffix to
eval_num_suffix_ll to remain consistent.
==== Description ====
Flashback can rollback the instances/databases/tables to an old snapshot.
It's implement on Server-Level by full image format binary logs (--binlog-row-image=FULL), so it supports all engines.
Currently, it’s a feature inside mysqlbinlog tool (with --flashback arguments).
Because the flashback binlog events will store in the memory, you should check if there is enough memory in your machine.
==== New Arguments to mysqlbinlog ====
--flashback (-B)
It will let mysqlbinlog to work on FLASHBACK mode.
==== New Arguments to mysqld ====
--flashback
Setup the server to use flashback. This enables binary log in row mode
and will enable extra logging for DDL's needed by flashback feature
==== Example ====
I have a table "t" in database "test", we can compare the output with "--flashback" and without.
#client/mysqlbinlog /data/mysqldata_10.0/binlog/mysql-bin.000001 -vv -d test -T t --start-datetime="2013-03-27 14:54:00" > /tmp/1.sql
#client/mysqlbinlog /data/mysqldata_10.0/binlog/mysql-bin.000001 -vv -d test -T t --start-datetime="2013-03-27 14:54:00" -B > /tmp/2.sql
Then, importing the output flashback file (/tmp/2.log), it can flashback your database/table to the special time (--start-datetime).
And if you know the exact postion, "--start-postion" is also works, mysqlbinlog will output the flashback logs that can flashback to "--start-postion" position.
==== Implement ====
1. As we know, if binlog_format is ROW (binlog-row-image=FULL in 10.1 and later), all columns value are store in the row event, so we can get the data before mis-operation.
2. Just do following things:
2.1 Change Event Type, INSERT->DELETE, DELETE->INSERT.
For example:
INSERT INTO t VALUES (...) ---> DELETE FROM t WHERE ...
DELETE FROM t ... ---> INSERT INTO t VALUES (...)
2.2 For Update_Event, swapping the SET part and WHERE part.
For example:
UPDATE t SET cols1 = vals1 WHERE cols2 = vals2
--->
UPDATE t SET cols2 = vals2 WHERE cols1 = vals1
2.3 For Multi-Rows Event, reverse the rows sequence, from the last row to the first row.
For example:
DELETE FROM t WHERE id=1; DELETE FROM t WHERE id=2; ...; DELETE FROM t WHERE id=n;
--->
DELETE FROM t WHERE id=n; ...; DELETE FROM t WHERE id=2; DELETE FROM t WHERE id=1;
2.4 Output those events from the last one to the first one which mis-operation happened.
For example:
Change default to zlib, this has effect only if user has
explicitly requested page compression and then user
naturally expects that pages are really compressed
if they can be compressed.
Most notably, this includes MDEV-11623, which includes a fix and
an upgrade procedure for the InnoDB file format incompatibility
that is present in MariaDB Server 10.1.0 through 10.1.20.
In other words, this merge should address
MDEV-11202 InnoDB 10.1 -> 10.2 migration does not work
restarting server with encryption and read-only
buf0buf.cc: Temporary slots used in encryption was calculated
by read_threads * write_threads. However, in read-only mode
write_threads is zero. Correct way is to calculate
(read_threads + write_threads) * max pending IO requests.
When a query containing a WITH clause is printed by EXPLAIN
EXTENDED command there should not be any data expansion in
the query specifications of the WITH elements of this WITH
clause.
innodb_file_format=Barracuda is the default in MariaDB 10.2.
Do not set it, because the option will be removed in MariaDB 10.3.
Also, do not set innodb_file_per_table=1 because it is the default.
Note that MDEV-11828 should fix the test innodb.innodb-64k
already in 10.1.
When MySQL 5.7.9 (and MariaDB Server 10.2) introduced
innodb_default_row_format and made ROW_FORMAT=DYNAMIC the default,
it became possible to create any ROW_FORMAT tables in the InnoDB
system tablespace, except ROW_FORMAT=COMPRESSED.
In MySQL 5.7, it is possible to create ROW_FORMAT=DYNAMIC
tables when TABLESPACE=innodb_system is explicitly specified.
Because MariaDB Server 10.2 does not support the MySQL 5.7
TABLESPACE=innodb_system attribute for tables, we should allow
ROW_FORMAT=DYNAMIC when innodb_file_per_table=0.
Also, remove the test innodb_zip.innodb-create-options, which was
an outdated copy of innodb_zip.create_options.
MySQL 5.7 allows temporary tables to be created in ROW_FORMAT=COMPRESSED.
The usefulness of this is questionable. WL#7899 in MySQL 8.0.0
prevents the creation of such compressed tables, so that all InnoDB
temporary tables will be located inside the predefined
InnoDB temporary tablespace.
Pick up and adjust some tests from MySQL 5.7 and 8.0.
dict_tf_to_fsp_flags(): Remove the parameter is_temp.
fsp_flags_init(): Remove the parameter is_temporary.
row_mysql_drop_temp_tables(): Remove. There cannot be any temporary
tables in InnoDB. (This never removed #sql* tables in the datadir
which were created by DDL.)
dict_table_t::dir_path_of_temp_table: Remove.
create_table_info_t::m_temp_path: Remove.
create_table_info_t::create_options_are_invalid(): Do not allow
ROW_FORMAT=COMPRESSED or KEY_BLOCK_SIZE for temporary tables.
create_table_info_t::innobase_table_flags(): Do not unnecessarily
prevent CREATE TEMPORARY TABLE with SPATIAL INDEX.
(MySQL 5.7 does allow this.)
fil_space_belongs_in_lru(): The only FIL_TYPE_TEMPORARY tablespace
is never subjected to closing least-recently-used files.
MySQL 5.7 introduced partial support for user-created shared tablespaces
(for example, import and export are not supported).
MariaDB Server does not support tablespaces at this point of time.
Let us remove most InnoDB code and data structures that is related
to shared tablespaces.
check_that_all_fields_are_given_values() relied on write_set,
but was run too early, before triggers updated write_set.
also, when triggers are present, fields might get values conditionally,
so we need to check that all fields are given values for every row.
* Remove duplicate lines from tests
* Use thd instead of current_thd
* Remove extra wsrep_binlog_format_names
* Correctly merge union patch from 5.5 wrt duplicate rows.
* Correctly merge SELinux changes into 10.1
The function fsp_flags_try_adjust(), which is called on startup,
is incrementing the Innodb_pages0_read counts for every affected file.
Adjust the result of encryption.innodb_lotoftables accordingly.
innodb.doublewrite: Similar to what was done to innodb.101_compatibility,
add an explicit $_ parameter to the Perl unpack function.
Also, fix some diagnostic messages in the Perl code.
innodb.innodb-wl5522-debug: Adjust for the changed error codes and
messages on fault injection.
Apparently, in older versions of Perl unpack does not have a logic
for using $_ as a default value for the second argument. Fixed by
specifying it explicitly
MariaDB 10.0/MySQL 5.6 using innodb-page-size!=16K
The storage format of FSP_SPACE_FLAGS was accidentally broken
already in MariaDB 10.1.0. This fix is bringing the format in
line with other MySQL and MariaDB release series.
Please refer to the comments that were added to fsp0fsp.h
for details.
This is an INCOMPATIBLE CHANGE that affects users of
page_compression and non-default innodb_page_size. Upgrading
to this release will correct the flags in the data files.
If you want to downgrade to earlier MariaDB 10.1.x, please refer
to the test innodb.101_compatibility how to reset the
FSP_SPACE_FLAGS in the files.
NOTE: MariaDB 10.1.0 to 10.1.20 can misinterpret
uncompressed data files with innodb_page_size=4k or 64k as
compressed innodb_page_size=16k files, and then probably fail
when trying to access the pages. See the comments in the
function fsp_flags_convert_from_101() for detailed analysis.
Move PAGE_COMPRESSION to FSP_SPACE_FLAGS bit position 16.
In this way, compressed innodb_page_size=16k tablespaces will not
be mistaken for uncompressed ones by MariaDB 10.1.0 to 10.1.20.
Derive PAGE_COMPRESSION_LEVEL, ATOMIC_WRITES and DATA_DIR from the
dict_table_t::flags when the table is available, in
fil_space_for_table_exists_in_mem() or fil_open_single_table_tablespace().
During crash recovery, fil_load_single_table_tablespace() will use
innodb_compression_level for the PAGE_COMPRESSION_LEVEL.
FSP_FLAGS_MEM_MASK: A bitmap of the memory-only fil_space_t::flags
that are not to be written to FSP_SPACE_FLAGS. Currently, these will
include PAGE_COMPRESSION_LEVEL, ATOMIC_WRITES and DATA_DIR.
Introduce the macro FSP_FLAGS_PAGE_SSIZE(). We only support
one innodb_page_size for the whole instance.
When creating a dummy tablespace for the redo log, use
fil_space_t::flags=0. The flags are never written to the redo log files.
Remove many FSP_FLAGS_SET_ macros.
dict_tf_verify_flags(): Remove. This is basically only duplicating
the logic of dict_tf_to_fsp_flags(), used in a debug assertion.
fil_space_t::mark: Remove. This flag was not used for anything.
fil_space_for_table_exists_in_mem(): Remove the unnecessary parameter
mark_space, and add a parameter for table flags. Check that
fil_space_t::flags match the table flags, and adjust the (memory-only)
flags based on the table flags.
fil_node_open_file(): Remove some redundant or unreachable conditions,
do not use stderr for output, and avoid unnecessary server aborts.
fil_user_tablespace_restore_page(): Convert the flags, so that the
correct page_size will be used when restoring a page from the
doublewrite buffer.
fil_space_get_page_compressed(), fsp_flags_is_page_compressed(): Remove.
It suffices to have fil_space_is_page_compressed().
FSP_FLAGS_WIDTH_DATA_DIR, FSP_FLAGS_WIDTH_PAGE_COMPRESSION_LEVEL,
FSP_FLAGS_WIDTH_ATOMIC_WRITES: Remove, because these flags do not
exist in the FSP_SPACE_FLAGS but only in memory.
fsp_flags_try_adjust(): New function, to adjust the FSP_SPACE_FLAGS
in page 0. Called by fil_open_single_table_tablespace(),
fil_space_for_table_exists_in_mem(), innobase_start_or_create_for_mysql()
except if --innodb-read-only is active.
fsp_flags_is_valid(ulint): Reimplement from the scratch, with
accurate comments. Do not display any details of detected
inconsistencies, because the output could be confusing when
dealing with MariaDB 10.1.x data files.
fsp_flags_convert_from_101(ulint): Convert flags from buggy
MariaDB 10.1.x format, or return ULINT_UNDEFINED if the flags
cannot be in MariaDB 10.1.x format.
fsp_flags_match(): Check the flags when probing files.
Implemented based on fsp_flags_is_valid()
and fsp_flags_convert_from_101().
dict_check_tablespaces_and_store_max_id(): Do not access the
page after committing the mini-transaction.
IMPORT TABLESPACE fixes:
AbstractCallback::init(): Convert the flags.
FetchIndexRootPages::operator(): Check that the tablespace flags match the
table flags. Do not attempt to convert tablespace flags to table flags,
because the conversion would necessarily be lossy.
PageConverter::update_header(): Write back the correct flags.
This takes care of the flags in IMPORT TABLESPACE.
contains a bad and a good copy
Clean up the InnoDB doublewrite buffer code.
buf_dblwr_init_or_load_pages(): Do not add empty pages to the buffer.
buf_dblwr_process(): Do consider changes to pages that are all zero.
Do not abort when finding a corrupted copy of a page in the doublewrite
buffer, because there could be multiple copies in the doublewrite buffer,
and only one of them needs to be good.
It was used for get_datetime_value() and for thd->is_error().
But in fact, get_datetime_value() never used thd argument, because the
cache ptr argument was NULL. And thd->is_error() check was not needed
at that place at all.
it used current_thd->alloc() and allocated on the thd's execution arena,
not on table->expr_arena.
Remove THD::arena_for_cached_items that is temporarily set in
update_virtual_fields(), and replaces THD arena in get_datetime_value().
Instead set THD arena to table->expr_arena for the whole duration
of update_virtual_fields()
Item_func_le included Arg_comparator. Arg_comparator remembered
the current_thd during fix_fields and used that value during
execution to allocate Item_cache in get_datetime_value().
But for vcols fix_fields and val_int can happen in different threads.
Same bug for Item_func_in using in_datetime or cmp_item_datetime,
both also remembered current_thd at fix_fields() to use it later
for get_datetime_value().
As a fix, these objects no longer remember the current_thd,
and get_datetime_value() uses current_thd at run time. This
should not increase the number of current_thd calls much, as
Item_cache is created only once anyway.
Fixing Item::decimal_precision() to return at least one digit.
This fixes the problem reported in MDEV.
Also, fixing Item_func_signed::fix_length_and_dec() to reserve
space for at least one digit (plus one character for an optional sign).
This is needed to have CONVERT(expr,SIGNED) and CONVERT(expr,UNSIGNED)
create correct string fields when they appear in string context, e.g.:
CREATE TABLE t1 AS SELECT CONCAT(CONVERT('',SIGNED));
Test crash recovery from an encrypted redo log with innodb_encrypt_log=0.
Previously, we did a clean shutdown, so only the log checkpoint
information would have been read from the redo log. With this change,
we will be reading and applying encrypted redo log records.
include/start_mysqld.inc: Observe $restart_parameters.
encryption.innodb-log-encrypt: Remove some unnecessary statements,
and instead of restarting the server and concurrently accessing
the files while the server is running, kill the server, check the
files, and finally start up the server.
innodb.log_data_file_size: Use start_mysqld.inc with $restart_parameters.
- Changed error handlers interface so that they can change error level in
the handler
- Give warnings and errors when calculating virtual columns
- On insert/update error is fatal in strict mode.
- SELECT and DELETE will only give a warning if a virtual field generates an error
- Added VCOL_UPDATE_FOR_DELETE and VCOL_UPDATE_INDEX_FOR_REPLACE to be able to
easily detect in update_virtual_fields() if we should use an error
handler to mask errors or not.
Problem was that one internal record buffer in MYISAM was not big enough to handle virtual fields.
Fixed by extending buffer.
Fixed test case to 79 characters
Found and fixed 2 problems:
- Filesort addon fields didn't mark virtual columns properly
- multi-range-read calculated vcol bitmap but was not using it.
This caused wrong vcol field to be calculated on read, which caused the assert.
When updating a table with virtual BLOB columns, the following might
happen:
- an old record is read from the table, it has no virtual blob values
- update_virtual_fields() is run, vcol blob gets its value into the
record. But only a pointer to the value is in the table->record[0],
the value is in Field_blob::value String (but it doesn't have to be!
it can be in the record, if the column is just a copy of another
columns: ... b VARCHAR, c BLOB AS (b) ...)
- store_record(table,record[1]), old record now is in record[1]
- fill_record() prepares new values in record[0], vcol blob is updated,
new value replaces the old one in the Field_blob::value
- now both record[1] and record[0] have a pointer that points to the
*new* vcol blob value. Or record[1] has a pointer to nowhere if
Field_blob::value had to realloc.
To fix this I have introduced a new String object 'read_value' in
Field_blob. When updating virtual columns when a row has been read,
the allocated value is stored in 'read_value' instead of 'value'. The
allocated blobs for the new row is stored in 'value' as before.
I also made, as a safety precaution, the insert delayed handling of
blobs more general by using value to store strings instead of the
record. This ensures that virtual functions on delayed insert should
work in as in the case of normal insert.
Triggers are now properly updating the read, write and vcol maps for used
fields. This means that we don't need VCOL_UPDATE_FOR_READ_WRITE anymore
and there is no need for any other special handling of triggers in
update_virtual_fields().
To be able to test how many times virtual fields are invoked, I also
relaxed rules that one can use local (@) variables in DEFAULT and non
persistent virtual field expressions.
- MDEV-11621 rpl.rpl_gtid_stop_start fails sporadically in buildbot
- MDEV-11620 rpl.rpl_upgrade_master_info fails sporadically in buildbot
The issue above was probably that the build machine was overworked and the
shutdown took longer than 30 resp 10 seconds, which caused MyISAM tables
to be marked as crashed.
Fixed by flushing myisam tables before doing a forced shutdown/kill.
I also increased timeout for forced shutdown from 10 seconds to 60 seconds
to fix other possible issues on slow machines.
Fixed also some compiler warnings
- privilege_table_io.test didn't properly reset roles_mapping
- Fixed memory allocation problem with CHECK CONSTRAINT, found when
running --valgrind main.check_constraint
- Atomic writes are enabled by default
- Automatically detect if device supports atomic write and use it if
atomic writes are enabled
- Remove ATOMIC WRITE options from CREATE TABLE
- Atomic write is a device option, not a table options as the table may
crash if the media changes
- Add support for SHANNON SSD cards
c3cf7f47f0 reverted the patch
for BUG#24487120. After merging the reverting patch from MySQL
to MariaDB the problems described in MDEV-11079 and MDEV-11631 disappeared.
Adding test cases only.
Perform a slow shutdown at the start of the test, and create all
InnoDB tables with STATS_PERSISTENT=0, so that any I/O related to
background tasks (change buffer merge, purge, persistent statistics)
should be eliminated.
This should be a non-functional change. I was unable to repeat
MDEV-11626 innodb.innodb-change-buffer-recovery fails for xtradb
and cannot determine the reason for the failure without having access
to the files.
The repeatability of MDEV-11626 should not be affected by these changes.
Problem was with deleting non existing .frm file for a storage engine that
doesn't have .frm files (yet)
Fixed by not giving an error for non existing .frm files for storage engines
that are using discovery
Fixed also valgrind supression related to the given test case
Sometimes innodb_data_file_size_debug was reported as INT UNSIGNED
instead of BIGINT UNSIGNED. Make it uint instead of ulong to get
a more deterministic result.
Cherry-pick: f4a0af070ce49abae60040f6f32e1074309c27fb
Author: Dmitry Lenev <dmitry.lenev@oracle.com>
Date: Mon Jul 25 16:06:52 2016 +0300
Fix for bug #16672723 "CAN'T FIND TEMPORARY TABLE".
Attempt to execute prepared CREATE TABLE SELECT statement which used
temporary table in the subquery in FROM clause and stored function
failed with unwarranted ER_NO_SUCH_TABLE error. The same happened
when such statement was used in stored procedure and this procedure
was re-executed.
The problem occurred because execution of such prepared statement/its
re-execution as part of stored procedure incorrectly set
Query_table_list::query_tables_own_last marker, indicating the last
table which is directly used by statement. As result temporary table
used in the subquery was treated as indirectly used/belonging to
prelocking list and was not pre-opened by open_temporary_tables()
call before statement execution. Thus causing ER_NO_SUCH_TABLE errors
since our code assumes that temporary tables need to be correctly
pre-opened before statement execution.
This problem became visible only in version 5.6 after patches related to
bug 11746602/27480 "EXTEND CREATE TEMPORARY TABLES PRIVILEGE TO ALLOW
TEMP TABLE OPERATIONS" since they have introduced pre-opening of temporary
tables for statements.
Incorrect setting of Query_table_list::query_tables_own_last happened
in LEX::first_lists_tables_same() method which is called by CREATE TABLE
SELECT implementation as part of LEX::unlink_first_table(), which temporary
excludes table list element for table being created from the query table
list before handling SELECT part.
LEX::first_lists_tables_same() tries to ensure that global table list of
the statement starts with the first table list element from the first
statement select. To do this it moves such table list element to the head
of the global table list. If this table happens to be last directly-used
table for the statement, query_tables_own_last marker is pointing to it.
Since this marker was not updated when table list element was moved we
ended up with all tables except the first table separated by it as if
they were not directly used by statement (i.e. belonged to prelocked
tables list).
This fix changes code of LEX::first_lists_tables_same() to update
query_tables_own_last marker in cases when it points to the table
being moved. It is set to the table which precedes table being moved
in this case.
MTR raises default wait_for_pos_timeout from 300 to 1500 when tests
are run with valgrind. The same needs to be done for other
replication-related waits.
The change should fix one of failures mentioned in MDEV-10653
(rpl.rpl_parallel fails in buildbot with timeout), the one
on the valgrind builder; but not all of them
The fix for bug mdev-5104 did not take into account that
for any call of setup_order the size of ref_array must
be big enough. This patch fixes this problem.
When the test is run as a part of the suite with valgrind,
only allow it to be executed if --big-test is set.
If the test is run by specifying its name explicitly, it
will still be executed, even with valgrind without big-test,
MTR has special logic for that
The guilty part of the test checks for performance degradation on
a query with numerous joins on an empty table. The test expects
the query to take less than 1 second, and fails if it is not so
(which can happen on very slow builders).
The solution is to add more JOINs to the query. On a fixed server,
it should not have any noticeable impact on the query execution,
while on the unfixed version the query would take several times
longer (e.g. 6.5 sec vs 1.5 sec). Thus, we can increase the margin
for the error, and make the test fail when the query takes longer
than 5 seconds.
1. The rows of a recursive CTE at some point may overflow
the HEAP temporary table containing them. At this point
the table is converted to a MyISAM temporary table and the
new added rows are placed into this MyISAM table.
A bug in the of select_union_recursive::send_data prevented
the server from writing the row that caused the overflow
into the temporary table used for the result of the iteration
steps. This could lead, in particular,to a premature end
of the iterations.
2. The method TABLE::insert_all_rows_into() that was used
to copy all rows of one temporary table into another
did not take into account that the destination temporary
table must be converted to a MyISAM table at some point.
This patch fixed this problem. It also renamed the method
into TABLE::insert_all_rows_into_tmp_table() and added
an extra parameter needed for the conversion.
encryption.innodb_scrub: Clean up. Make it also cover ROW_FORMAT=COMPRESSED,
removing the need for encryption.innodb_scrub_compressed.
Add a FIXME comment saying that we should create a secondary index, to
demonstrate that also undo log pages get scrubbed. Currently that is
not working!
Also clean up encryption.innodb_scrub_background, but keep it disabled,
because the background scrubbing does not work reliably.
Fix both tests so that if something is not scrubbed, the test will be
aborted, so that the data files will be preserved. Allow the tests to
run on Windows as well.
Backport the fix to 5.5, because it fails there too
The patch fixes two test failures:
- on slow builders, sometimes a connection attempt which should
fail due to the exceeded number of thread_pool_max_threads
actually succeeds;
- on even slow builders, MTR sometimes cannot establish the
initial connection, and check-testcase fails prior to the
test start
The problem with check-testcase was caused by connect-timeout=2
which was set for all clients in the test config file. On slow
builders it might be not enough.
There is no way to override it for the pre-test check, so it needed
to be substantially increased or removed.
The other problem was caused by a race condition between sleeps
that the test performs in existing connections and the connect
timeout for the connection attempt which was expected to fail.
If sleeps finished before the connect-timeout was exceeded, it
would allow the connection to succeed.
To solve each problem without making the other one worse,
connect-timeout should be configured dynamically during the test.
Due to the nature of the test (all connections must be busy
at the moment when we need to change the timeout, and cannot execute
SET GLOBAL ...), it needs to be done independently from the server.
The solution:
- recognize 'connect_timeout' as a connection option in mysqltest's
"connect" command;
- remove connect-timeout from the test configuration file;
- use the new connect_timeout option for those connections which
are expected to fail;
- re-arrange the test flow to allow running a huge SLEEP
without affecting the test execution time (because it would be
interrupted after the main test flow is finished).
The test is still subject to false negatives, e.g. if the connection
fails due to timeout rather than due to the exceeded number of
allowed threads, or if the connection on extra port succeeds due
to a race condition and not because the special logic for the extra
port. But those false negatives have always been possible there
on slow builders, they should not be critical because faster builders
should catch such failures if they appear.
Conflicts:
client/mysqltest.cc
mysql-test/r/pool_of_threads.result
mysql-test/t/pool_of_threads.test
10.1 is merged into 10.2 now. Two issues are left to fix:
(1) encryption.innochecksum test
(2) read_page0 vs page_0_crypt_read
(1) innochecksum tool did not compile after merge because
buf_page_is_corrupted uses fil_crypt_t that has been changed.
extra/CMakeLists.txt: Added fil/fil0crypt.cc as dependency
as we need to use fil_crypt_verify_checksum for encrypted pages.
innochecksum.cc: If we think page is encrypted i.e.
FIL_PAGE_FILE_FLUSH_LSN_OR_KEY_VERSION != 0 we call
fil_crypt_verify_checksum() function to compare calculated
checksum to stored checksum calculated after encryption
(this is stored on different offset i.e.
FIL_PAGE_FILE_FLUSH_LSN_OR_KEY_VERSION + 4).
If checksum does not match we call normal buf_page_is_corrupted
to compare calculated checksum to stored checksum.
fil0crypt.cc: add #ifdef UNIV_INNOCHECKSUM to be able to compile
this file for innochecksum tool.
(2) read_page0 is not needed and thus removed.
Problem was that log_scrub function did not take required log_sys mutex.
Background: Unused space in log blocks are padded with MLOG_DUMMY_RECORD if innodb-scrub-log
is enabled. As log files are written on circular fashion old log blocks can be reused
later for new redo-log entries. Scrubbing pads unused space in log blocks to avoid visibility
of the possible old redo-log contents.
log_scrub(): Take log_sys mutex
log_pad_current_log_block(): Increase srv_stats.n_log_scrubs if padding is done.
srv0srv.cc: Set srv_stats.n_log_scrubs to export vars innodb_scrub_log
ha_innodb.cc: Export innodb_scrub_log to global status.
The C preprocessor symbol WITH_NUMA is never defined. Instead, the symbol
HAVE_LIBNUMA is used for checking if the feature is to be used.
If cmake -DWITH_NUMA=OFF is specified, HAVE_LIBNUMA will not be defined
at compilation time even if the library is available.
If cmake -DWITH_NUMA=ON is specified but the library is not available
at configuration time, the compilation will be aborted.
Problem:-
The condition that checks for node readiness is too strict as it does
not allow SELECTs even if these selects do not access any tables.
For example,if we run
SELECT 1;
OR
SELECT @@max_allowed_packet;
Solution:-
We need not to report this error when all_tables(lex->query_tables)
is NULL:
The patch fixes two test failures:
- on slow builders, sometimes a connection attempt which should
fail due to the exceeded number of thread_pool_max_threads
actually succeeds;
- on even slow builders, MTR sometimes cannot establish the
initial connection, and check-testcase fails prior to the
test start
The problem with check-testcase was caused by connect-timeout=2
which was set for all clients in the test config file. On slow
builders it might be not enough.
There is no way to override it for the pre-test check, so it needed
to be substantially increased or removed.
The other problem was caused by a race condition between sleeps
that the test performs in existing connections and the connect
timeout for the connection attempt which was expected to fail.
If sleeps finished before the connect-timeout was exceeded, it
would allow the connection to succeed.
To solve each problem without making the other one worse,
connect-timeout should be configured dynamically during the test.
Due to the nature of the test (all connections must be busy
at the moment when we need to change the timeout, and cannot execute
SET GLOBAL ...), it needs to be done independently from the server.
The solution:
- recognize 'connect_timeout' as a connection option in mysqltest's
"connect" command;
- remove connect-timeout from the test configuration file;
- use the new connect_timeout option for those connections which
are expected to fail;
- re-arrange the test flow to allow running a huge SLEEP
without affecting the test execution time (because it would be
interrupted after the main test flow is finished).
The test is still subject to false negatives, e.g. if the connection
fails due to timeout rather than due to the exceeded number of
allowed threads, or if the connection on extra port succeeds due
to a race condition and not because the special logic for the extra
port. But those false negatives have always been possible there
on slow builders, they should not be critical because faster builders
should catch such failures if they appear.
Problem:- In replication if slave has extra persistent column then these
column are not computed while applying write-set from master.
Solution:- While applying row events from server, we will generate values
for extra persistent columns.
Problem:- In replication if slave has extra persistent column then these
column are not computed while applying write-set from master.
Solution:- While applying row events from server, we will generate values
for extra persistent columns.
Problem:- In replication if slave has extra persistent column then these
column are not computed while applying write-set from master.
Solution:- While applying row events from server, we will generate values
for extra persistent columns.
