The lock_type is upgrade to TL_WRITE from TL_WRITE_DELAYED for
INSERT DELAYED when inserting multi values in one statement.
It's safe. But it causes an unsafe warning in SBR.
Make INSERT DELAYED safe by logging it as INSERT without DELAYED.
'CREATE TABLE IF NOT EXISTS ... SELECT' behaviour
BUG#47132, BUG#47442, BUG49494, BUG#23992 and BUG#48814 will disappear
automatically after the this patch.
BUG#55617 is fixed by this patch too.
This is the 5.5 part.
It implements:
- 'CREATE TABLE IF NOT EXISTS ... SELECT' statement will not insert
anything and binlog anything if the table already exists.
It only generate a warning that table already exists.
- A couple of test cases for the behavior changing.
locks on the table
Fixing the partitioning specifics after TRUNCATE TABLE in
bug-42643 was fixed.
Reorganize of code to decrease the size of the giant switch
in mysql_execute_command, and to prepare for future parser
reengineering. Moved code into Sql_statement objects.
Updated patch according to davi's review comments.
TABLES <list> WITH READ LOCK are incompatible".
The problem was that FLUSH TABLES <list> WITH READ LOCK
which was issued when other connection has acquired global
read lock using FLUSH TABLES WITH READ LOCK was blocked
and has to wait until global read lock is released.
This issue stemmed from the fact that FLUSH TABLES <list>
WITH READ LOCK implementation has acquired X metadata locks
on tables to be flushed. Since these locks required acquiring
of global IX lock this statement was incompatible with global
read lock.
This patch addresses problem by using SNW metadata type of
lock for tables to be flushed by FLUSH TABLES <list> WITH
READ LOCK. It is OK to acquire them without global IX lock
as long as we won't try to upgrade those locks. Since SNW
locks allow concurrent statements using same table FLUSH
TABLE <list> WITH READ LOCK now has to wait until old
versions of tables to be flushed go away after acquiring
metadata locks. Since such waiting can lead to deadlock
MDL deadlock detector was extended to take into account
waits for flush and resolve such deadlocks.
As a bonus code in open_tables() which was responsible for
waiting old versions of tables to go away was refactored.
Now when we encounter old version of table in open_table()
we don't back-off and wait for all old version to go away,
but instead wait for this particular table to be flushed.
Such approach supported by deadlock detection should reduce
number of scenarios in which FLUSH TABLES aborts concurrent
multi-statement transactions.
Note that active FLUSH TABLES <list> WITH READ LOCK still
blocks concurrent FLUSH TABLES WITH READ LOCK statement
as the former keeps tables open and thus prevents the
latter statement from doing flush.
DATABASE with open HANDLER"
Remove LOCK_create_db, database name locks, and use metadata locks instead.
This exposes CREATE/DROP/ALTER DATABASE statements to the graph-based
deadlock detector in MDL, and paves the way for a safe, deadlock-free
implementation of RENAME DATABASE.
Database DDL statements will now take exclusive metadata locks on
the database name, while table/view/routine DDL statements take
intention exclusive locks on the database name. This prevents race
conditions between database DDL and table/view/routine DDL.
(e.g. DROP DATABASE with concurrent CREATE/ALTER/DROP TABLE)
By adding database name locks, this patch implements
WL#4450 "DDL locking: CREATE/DROP DATABASE must use database locks" and
WL#4985 "DDL locking: namespace/hierarchical locks".
The patch also changes code to use init_one_table() where appropriate.
The new lock_table_names() function requires TABLE_LIST::db_length to
be set correctly, and this is taken care of by init_one_table().
This patch also adds a simple template to help work with
the mysys HASH data structure.
Most of the patch was written by Konstantin Osipov.
subsystem. Fix a number of caveates that the previous
implementation suffered from, including unprotected
access to shared data and lax resource accounting
(share->ref_count) that could lead to deadlocks.
The new implementation still suffers from a number
of potential deadlocks in some edge cases, and this is
still not enabled by default. Especially since performance
testing has shown that it gives only marginable (not even
exceeding measuring accuracy) improvements.
@todo:
- Remove calls to close_cached_tables() with REFRESH_FAST,
and have_lock, because they break the MDL cache.
- rework FLUSH TABLES <list> to not use close_cached_tables()
- make sure that whenever we set TABLE_SHARE::version to
0 we free MDL cache references to it.
strict aliasing violations.
One somewhat major source of strict-aliasing violations and
related warnings is the SQL_LIST structure. For example,
consider its member function `link_in_list` which takes
a pointer to pointer of type T (any type) as a pointer to
pointer to unsigned char. Dereferencing this pointer, which
is done to reset the next field, violates strict-aliasing
rules and might cause problems for surrounding code that
uses the next field of the object being added to the list.
The solution is to use templates to parametrize the SQL_LIST
structure in order to deference the pointers with compatible
types. As a side bonus, it becomes possible to remove quite
a few casts related to acessing data members of SQL_LIST.
Bug#46527 COMMIT AND CHAIN RELEASE does not make sense
Bug#53343 completion_type=1, COMMIT/ROLLBACK AND CHAIN don't
preserve the isolation level
Bug#53346 completion_type has strange effect in a stored
procedure/prepared statement
Added test cases to verify the expected behaviour of :
SET SESSION TRANSACTION ISOLATION LEVEL,
SET TRANSACTION ISOLATION LEVEL,
@@completion_type,
COMMIT AND CHAIN,
ROLLBACK AND CHAIN
..and some combinations of the above
This crash happened if a table was listed twice in a DROP TABLE statement,
and the statement was executed while in LOCK TABLES mode. Since the two
elements of table list were identical, they were assigned the same TABLE object.
During processing of the first table element, the TABLE instance was destroyed
and the second table list element was left with a dangling reference.
When this reference was later accessed, the server crashed.
Listing the same table twice in DROP TABLES should give an ER_NONUNIQ_TABLE
error. However, this did not happen as the check for unique table names was
skipped due to the lock type for table list elements being set to TL_IGNORE.
Previously TL_UNLOCK was used and the unique check was performed.
This bug was a regression introduced by a pre-requisite patch for
Bug#51263 "Deadlock between transactional SELECT and ALTER TABLE ...
REBUILD PARTITION". The regression only existed in an internal team
tree and never in any released code.
This patch reverts DROP TABLE (and DROP VIEW) to the old behavior of
using TL_UNLOCK locks. Test case added to drop.test.
Conflicts:
Text conflict in mysql-test/r/archive.result
Contents conflict in mysql-test/r/innodb_bug38231.result
Text conflict in mysql-test/r/mdl_sync.result
Text conflict in mysql-test/suite/binlog/t/disabled.def
Text conflict in mysql-test/suite/rpl_ndb/r/rpl_ndb_binlog_format_errors.result
Text conflict in mysql-test/t/archive.test
Contents conflict in mysql-test/t/innodb_bug38231.test
Text conflict in mysql-test/t/mdl_sync.test
Text conflict in sql/sp_head.cc
Text conflict in sql/sql_show.cc
Text conflict in sql/table.cc
Text conflict in sql/table.h
SELECT and ALTER TABLE ... REBUILD PARTITION".
ALTER TABLE on InnoDB table (including partitioned tables)
acquired exclusive locks on rows of table being altered.
In cases when there was concurrent transaction which did
locking reads from this table this sometimes led to a
deadlock which was not detected by MDL subsystem nor by
InnoDB engine (and was reported only after exceeding
innodb_lock_wait_timeout).
This problem stemmed from the fact that ALTER TABLE acquired
TL_WRITE_ALLOW_READ lock on table being altered. This lock
was interpreted as a write lock and thus for table being
altered handler::external_lock() method was called with
F_WRLCK as an argument. As result InnoDB engine treated
ALTER TABLE as an operation which is going to change data
and acquired LOCK_X locks on rows being read from old
version of table.
In case when there was a transaction which already acquired
SR metadata lock on table and some LOCK_S locks on its rows
(e.g. by using it in subquery of DML statement) concurrent
ALTER TABLE was blocked at the moment when it tried to
acquire LOCK_X lock before reading one of these rows.
The transaction's attempt to acquire SW metadata lock on
table being altered led to deadlock, since it had to wait
for ALTER TABLE to release SNW lock. This deadlock was not
detected and got resolved only after timeout expiring
because waiting were happening in two different subsystems.
Similar deadlocks could have occured in other situations.
This patch tries to solve the problem by changing ALTER TABLE
implementation to use TL_READ_NO_INSERT lock instead of
TL_WRITE_ALLOW_READ. After this step handler::external_lock()
is called with F_RDLCK as an argument and InnoDB engine
correctly interprets ALTER TABLE as operation which only
reads data from original version of table. Thanks to this
ALTER TABLE acquires only LOCK_S locks on rows it reads.
This, in its turn, causes inter-subsystem deadlocks to go
away, as all potential lock conflicts and thus deadlocks will
be limited to metadata locking subsystem:
- When ALTER TABLE reads rows from table being altered it
can't encounter any locks which conflict with LOCK_S row
locks. There should be no concurrent transactions holding
LOCK_X row locks. Such a transaction should have been
acquired SW metadata lock on table first which would have
conflicted with ALTER's SNW lock.
- Vice versa, when DML which runs concurrently with ALTER
TABLE tries to lock row it should be requesting only LOCK_S
lock which is compatible with locks acquired by ALTER,
as otherwise such DML must own an SW metadata lock on table
which would be incompatible with ALTER's SNW lock.
The problem was that TRUNCATE TABLE didn't take a exclusive
lock on a table if it resorted to truncating via delete of
all rows in the table. Specifically for InnoDB tables, this
could break proper isolation as InnoDB ends up aborting some
granted locks when truncating a table.
The solution is to take a exclusive metadata lock before
TRUNCATE TABLE can proceed. This guarantees that no other
transaction is using the table.
Incompatible change: Truncate via delete no longer fails
if sql_safe_updates is activated (this was a undocumented
side effect).
transactional SELECT and ALTER TABLE ... REBUILD PARTITION".
The goal of this patch is to decouple type of metadata
lock acquired for table by open_tables() from type of
table-level lock to be acquired on it.
To achieve this we change approach to how we determine what
type of metadata lock should be acquired on table to be open.
Now instead of inferring it at open_tables() time from flags
and type of table-level lock we rely on that type of metadata
lock is properly set at parsing time and is not changed
further.
Conflicts:
Text conflict in mysql-test/r/grant.result
Text conflict in mysql-test/t/grant.test
Text conflict in mysys/mf_loadpath.c
Text conflict in sql/slave.cc
Text conflict in sql/sql_priv.h
Bug#20837 Apparent change of isolation level during transaction,
Bug#46527 COMMIT AND CHAIN RELEASE does not make sense,
Bug#53343 completion_type=1, COMMIT/ROLLBACK AND CHAIN don't
preserve the isolation level
Bug#53346 completion_type has strange effect in a stored
procedure/prepared statement
Make thd->tx_isolation mean strictly "current transaction
isolation level"
Make thd->variables.tx_isolation mean "current session isolation
level".
The current transaction isolation level is now established
at transaction start. If there was a SET TRANSACTION
ISOLATION LEVEL statement, the value is taken from it.
Otherwise, the session value is used.
A change in a session value, made while a transaction is active,
whereas still allowed, no longer has any effect on the
current transaction isolation level. This is an incompatible
change.
A change in a session isolation level, made while there is
no active transaction, overrides SET TRANSACTION statement,
if there was any.
Changed the impelmentation to not look at @@session.completion_type
in the parser, and thus fixed Bug#53346.
Changed the parser to not allow AND NO CHAIN RELEASE,
and thus fixed Bug#46527.
Changed the transaction API to take the current transaction
isolation level into account:
- BEGIN/COMMIT now do preserve the current transaction
isolation level if chaining is on.
- implicit commit, XA COMMIT or XA ROLLBACK or autocommit don't.
This is the 5.1 merge and extension of the fix.
The server was happily accepting paths in table name in all places a table
name is accepted (e.g. a SELECT). This allowed all users that have some
privilege over some database to read all tables in all databases in all
mysql server instances that the server file system has access to.
Fixed by :
1. making sure no path elements are allowed in quoted table name when
constructing the path (note that the path symbols are still valid in table names
when they're properly escaped by the server).
2. checking the #mysql50# prefixed names the same way they're checked for
path elements in mysql-5.0.
Fix for bug #46947 "Embedded SELECT without FOR UPDATE is
causing a lock", with after-review fixes.
SELECT statements with subqueries referencing InnoDB tables
were acquiring shared locks on rows in these tables when they
were executed in REPEATABLE-READ mode and with statement or
mixed mode binary logging turned on.
This was a regression which were introduced when fixing
bug 39843.
The problem was that for tables belonging to subqueries
parser set TL_READ_DEFAULT as a lock type. In cases when
statement/mixed binary logging at open_tables() time this
type of lock was converted to TL_READ_NO_INSERT lock at
open_tables() time and caused InnoDB engine to acquire
shared locks on reads from these tables. Although in some
cases such behavior was correct (e.g. for subqueries in
DELETE) in case of SELECT it has caused unnecessary locking.
This patch tries to solve this problem by rethinking our
approach to how we handle locking for SELECT and subqueries.
Now we always set TL_READ_DEFAULT lock type for all cases
when we read data. When at open_tables() time this lock
is interpreted as TL_READ_NO_INSERT or TL_READ depending
on whether this statement as a whole or call to function
which uses particular table should be written to the
binary log or not (if yes then statement should be properly
serialized with concurrent statements and stronger lock
should be acquired).
Test coverage is added for both InnoDB and MyISAM.
This patch introduces an "incompatible" change in locking
scheme for subqueries used in SELECT ... FOR UPDATE and
SELECT .. IN SHARE MODE.
In 4.1 the server would use a snapshot InnoDB read for
subqueries in SELECT FOR UPDATE and SELECT .. IN SHARE MODE
statements, regardless of whether the binary log is on or off.
If the user required a different type of read (i.e. locking read),
he/she could request so explicitly by providing FOR UPDATE/IN SHARE MODE
clause for each individual subquery.
On of the patches for 5.0 broke this behaviour (which was not documented
or tested), and started to use locking reads fora all subqueries in SELECT ...
FOR UPDATE/IN SHARE MODE. This patch restored 4.1 behaviour.
Allow stored procedure variables in LIMIT clause.
Only allow variables of INTEGER types.
Handle negative values by means of an implicit cast to UNSIGNED
(similarly to prepared statement placeholders).
Add tests.
Make sure replication works by not doing NAME_CONST substitution
for variables in LIMIT clause.
Add replication tests.
This patch:
- Moves all definitions from the mysql_priv.h file into
header files for the component where the variable is
defined
- Creates header files if the component lacks one
- Eliminates all include directives from mysql_priv.h
- Eliminates all circular include cycles
- Rename time.cc to sql_time.cc
- Rename mysql_priv.h to sql_priv.h
Conflicts:
Text conflict in client/mysqlbinlog.cc
Text conflict in mysql-test/Makefile.am
Text conflict in mysql-test/collections/default.daily
Text conflict in mysql-test/r/mysqlbinlog_row_innodb.result
Text conflict in mysql-test/suite/rpl/r/rpl_typeconv_innodb.result
Text conflict in mysql-test/suite/rpl/t/rpl_get_master_version_and_clock.test
Text conflict in mysql-test/suite/rpl/t/rpl_row_create_table.test
Text conflict in mysql-test/suite/rpl/t/rpl_slave_skip.test
Text conflict in mysql-test/suite/rpl/t/rpl_typeconv_innodb.test
Text conflict in mysys/charset.c
Text conflict in sql/field.cc
Text conflict in sql/field.h
Text conflict in sql/item.h
Text conflict in sql/item_func.cc
Text conflict in sql/log.cc
Text conflict in sql/log_event.cc
Text conflict in sql/log_event_old.cc
Text conflict in sql/mysqld.cc
Text conflict in sql/rpl_utility.cc
Text conflict in sql/rpl_utility.h
Text conflict in sql/set_var.cc
Text conflict in sql/share/Makefile.am
Text conflict in sql/sql_delete.cc
Text conflict in sql/sql_plugin.cc
Text conflict in sql/sql_select.cc
Text conflict in sql/sql_table.cc
Text conflict in storage/example/ha_example.h
Text conflict in storage/federated/ha_federated.cc
Text conflict in storage/myisammrg/ha_myisammrg.cc
Text conflict in storage/myisammrg/myrg_open.c
Conflicts:
Text conflict in mysql-test/r/partition_innodb.result
Text conflict in sql/field.h
Text conflict in sql/item.h
Text conflict in sql/item_cmpfunc.h
Text conflict in sql/item_sum.h
Text conflict in sql/log_event_old.cc
Text conflict in sql/protocol.cc
Text conflict in sql/sql_select.cc
Text conflict in sql/sql_yacc.yy
SunStudio
SunStudio compilers of late warn about methods that might hide
methods in base classes due to the use of overloading combined
with overriding. SunStudio also warns about variables defined
in local socpe or method arguments that have the same name as
a member attribute of the class.
This patch renames methods that might hide base class methods,
to make it easier both for humans and compilers to see what is
actually called. It also renames variables in local scope.
Extend and implement the grammar that allows to FLUSH WITH READ LOCK
a list of tables, rather than all of them.
Incompatible grammar change:
Previously one could perform FLUSH TABLES, HOSTS, PRIVILEGES in a single
statement.
After this change, FLUSH TABLES must always be alone on the list.
Judging by the test suite, however, the old extended syntax
was never or very rarely used.
The new statement requires RELOAD ACL global privilege and
LOCK_TABLES_ACL | SELECT_ACL on individual tables.
In other words, it's an atomic combination of LOCK TALBES <list> READ
and FLUSH TABLES <list>, and requires respective privileges.
For additional information about the semantics, please
see WL#5000 and the comment for flush_tables_with_read_lock()
function in sql_parse.cc
"TYPE=storage_engine" is deprecated, and will be removed
in the Celosia release of MySQL. Since the option is
present in the Betony release and the version number of
Celosia is still not decided, we need to bump the
deprecation version number back up to "6.0".
The task is to
(a) add a comment on indexes and
(b) increase the maximum length of column, table and the new index comments.
The patch committed on behalf of Yoshinori Matsunobu (Yoshinori.Matsunobu@Sun.COM).
Fix Bug#50555 "handler commands crash server in my_hash_first()"
as a post-merge fix (the new handler tests are not passing
otherwise).
- in hash.c, don't call calc_hash if ! my_hash_inited().
- add tests and results for the test case for Bug#50555
Original revision:
------------------------------------------------------------
revision-id: li-bing.song@sun.com-20100130124925-o6sfex42b6noyc6x
parent: joro@sun.com-20100129145427-0n79l9hnk0q43ajk
committer: <Li-Bing.Song@sun.com>
branch nick: mysql-5.1-bugteam
timestamp: Sat 2010-01-30 20:49:25 +0800
message:
Bug #48321 CURRENT_USER() incorrectly replicated for DROP/RENAME USER;
REVOKE/GRANT; ALTER EVENT.
The following statements support the CURRENT_USER() where a user is needed.
DROP USER
RENAME USER CURRENT_USER() ...
GRANT ... TO CURRENT_USER()
REVOKE ... FROM CURRENT_USER()
ALTER DEFINER = CURRENT_USER() EVENT
but, When these statements are binlogged, CURRENT_USER() just is binlogged
as 'CURRENT_USER()', it is not expanded to the real user name. When slave
executes the log event, 'CURRENT_USER()' is expand to the user of slave
SQL thread, but SQL thread's user name always NULL. This breaks the replication.
After this patch, All above statements are rewritten when they are binlogged.
The CURRENT_USER() is expanded to the real user's name and host.
------------------------------------------------------------
REVOKE/GRANT; ALTER EVENT.
The following statements support the CURRENT_USER() where a user is needed.
DROP USER
RENAME USER CURRENT_USER() ...
GRANT ... TO CURRENT_USER()
REVOKE ... FROM CURRENT_USER()
ALTER DEFINER = CURRENT_USER() EVENT
but, When these statements are binlogged, CURRENT_USER() just is binlogged
as 'CURRENT_USER()', it is not expanded to the real user name. When slave
executes the log event, 'CURRENT_USER()' is expand to the user of slave
SQL thread, but SQL thread's user name always NULL. This breaks the replication.
After this patch, All above statements are rewritten when they are binlogged.
The CURRENT_USER() is expanded to the real user's name and host.
removed in MySQL 6.0
CREATE TABLE... TYPE= returns the warning "The syntax
'TYPE=storage_engine' is deprecated and will be removed in
MySQL 6.0. Please use 'ENGINE=storage_engine' instead"
This syntax is deprecated already from version 5.4.4, so
the message has been changed.
In addition, the deprecation macro was changed to reflect
the ServerPT decision not to include version number in the
warning message.
A number of test result files have been changed as a
consequence of the change in the deprecation macro.
